#🔧│keyboard_modding
1 messages · Page 741 of 1
No white variant
that new rgbW TMR board
i had everything else the same for ti he for quite a while. and it was fine
i've been thinking lately and I actually wonder if gateron went 3.2mm on the sparks because it's easier to get them to perform better on magnet stability
Very, especially from Gat
only the Genty Not Silents were around that and open bottom iirc
wow it’s real!
I kinda think we’re gonna see more boards with a structure like that
HE/TMR boards that is
are they actually 3.2mm or they lie about that too?
i haven't received my care package yet so no idea, haven't measured myself
i assumed at first that the 3.2mm was because they adjusted it to cover up the entire split stem
has anyone tested the mmd c1?
as in more than just a twitter sound test type thing
i want to put together 3 rgb recommendations, so far it's probably something like ur ice ultra, phylina thunderflash white, ttc kom rgb purple heart for 3 variations of stem styles/sounds. Wondering where that new mmd c1 might fit in
having true white on rgb is probably the only rgb I'd use now
should have em next week, or maybe just maybe later this week
I’ve been on about rgbw LEDs for keyboards for so long but this is the first time I’ve actually seen it lmao
the white of white LEDs is so far beyond what RGB LEDs can achieve 😭
rgbw LEDs should be mandatory for keyboards
😂
new "sony" keyboard with he and their promo video apparently just uh doesnt use their own cable. wonder whose cable they blurred out
I know that logo
Woot cable is very noice
there's an 80he inside of that keyboard
Surely it's actually 0.005mm and board doesn't set a deadzone automatically (It does)
I assume it stands for Real Time, so draw the conclusion
Rapid Trigger 😭
but they mean mm, not ms
he will be sued for defamation 
since the limit of what is actually possible in low sensitivity has been reached, maybe it's time for these brands to invent a new metric
i think no one has competed for largest sensitivity yet
no one offers a 5mm setting yet. It's time for them to adapt
They updated it 👍
pair that with the $4.5 per switch recolors and you got a fantastic product for sure
When are we measuring key press with atom accuracy
Honestly kinda crazy that the way the market has developed is more expensive stuff to support useless features instead of making shit cheaper and more reliable from the software side
Software hard....
Softwawe hawd :(((( wecolow easy :)))
Plus why have good software when you can recolor what the OEM provides
And if the software actually good, they might not want to buy another keyboard
atoms too big, I need that planck length rt
Real
And then the number obsessed idiots that dont know what means what will demand 0.1 planck length RT
they do whatever sells, if people keep buying expensive switches, ofc they’re gonna come out with even more expensive ones 😭
Good software and warranty doesn't sell I guess
I think it probably sells but carries too much risk for a lot of these companies
only geon, rakka and woot still update their older boards
maybe monsgeek too, I don’t remember
or melgeek
Stands to be seen imo all of them aside from Wooting have only existed for a very short period of time
In the HE space at least
venom is how old now?
a bit over a year or something
rakka almost two years probably
btw anyone with gateron sparks can confirm their top wobble for me? I want to see if they're like polar pro+ with the top wobble being quite pronounced
still waiting on my gateron package so can't test it myself right now
Geon sparks? There's his own version?
This bro is low key waiting for the copper plate with me
oh oops typo
He’s been sitting here for over 3 hours already
anybody else with the gt80 have trouble with putting foam into the keyboard?
like it messes up the gasket and makes it tight
i use poly fill
Knob wall when?
yeah just doing the same honestly, sounds pretty nice though, might try find like 0.5mm pe or eva foam and throw it in below if it woudl work
255grams
simon had to sync up 24 80HEs, so the switch selector is delayed by another 2 months

Simon didn't work on that, but now that you've mentioned it, your prophecy came true 
So thats why second analogue curve is delayed

I think with the current pace, we’ll all be grey by the time a second analog curve is added lmao
Can't rush perfection
More like we should count by balding per year
Guys, I ordered a Holy60 clone from Taobao and it doesn't come with any standoff. Will this be an issue?
Can we just screw the wooting pcb directly onto the plate?
unless that milky thing is a sheet of foam prob no
all the components are on the bottom side so they need something super soft like foam not rubber sheet
U need standoffs to do that…
plenty of colors
Are these considered the appropriate standoffs?
That milky thing is like a plastic plate
With a plastic case, yeah. They do look short though.
Maybe the plastic piece is too thick
so lets put it into simple terms: if the clearance isnt enough and smth breaks on the pcb due to it, there is no warranty.
scary
are you friction fitting or tray mounting into this taobao case?
oh good question from sno
If there’s enough clearance, you’re fine @vapid frigate but just check
could prob also just not have the plastic piece in
nice, only $7
legend doesn't look bad too from the pic
If my understanding is correct, should be tray mounting.
Yikes. Sounds so scary. How can we know there's enough clearance until we actually install it? Lol.
The PCB can't touch the plastic plate at all?
that would be ideal and its not the pcb that will touch but the electronic components hanging from the pcb
Tofu this time, 1299 yuan
Can buy pcb separately? Already got the case
Not atm
I'm curiously about their PCB and technical stuffs
I don't like their design case, too sharp
😂
It’s not scary or dangerous to check, dw. Just lay the PCB in (without screwing it down) and look from the front side.
You’re prob better off not using the plastic sheet anyway
and just the stock case foam
the one thing i would still recommend people to buy from woot
decent price, gud quality, and gud lookin
Noice
brass plate?
Copper
ngl, wooting should sell the default straight cable individually with the USB C to A adapter
cause buying this is the cheapest way, but $30 is too much for a cable.
who buying the atk switches
geon cable exists :3
simple straight cable at a lower price if you wanna go that route
Arent the white polar pros $0.90 each
cant trust switches that cheap
Ah theyre not the 90cent ones, ATKs are fully clear
Meh ill just wait for spare parts from the RS7 v2
but it will cause some scratches on certain case
personally believe that it is a issue with case design
Copper plate, fully foamless, Elf kings(Flux spacebar and arrow⬆️) w and without keebmat
First impressions about Copper plate: heavy asf, clack switches only
L Geon fanboy
oh wait
that means
its not a issue specific to geon cable though :3
it's Geon's case issue as well!
my leggera port had some scratches because of that cable
yea then its a leggera issue
i try to be objective
whenever possible, sometimes its impossible
Skill issue
i was gonna say bro gotta drink less to help with that shaky hand
but but but i stopped myself lol

saying geon glazer with venom pfp is wild ngl
should change to carnage or some shii

should change to venom twerking gif
reported for griefing ;_;
that gif should be banned ong
It’s a usb c port. Pretty standard size lol
i don't want to continue this convo
lol damn don’t notice
I thought that was grape LMAO
Hey, does anyone know if the friction pad for the 60 HE is compatible with the tofu60 Redux Case??
most likely yes
edit: actually i think it was mentioned in one of wooting's video saying its compatible
And is the ANSI plate a good idea to invest in? or should i just mount the keyboard without it, it is like extra 15 usd
you asking if you need these right
thx, very helpfull
yessir
did you get the 60HE module
i will
not necessary, its perference which material of plate you use
it comes with a stock PC plate (pretty flexy and dampens alot of sound) on the module. Depending on how you want the sound profile (if you want to change it at all), FR4 might be a fun one to play with, but if you dont care PC should be fine
so FR4 means it is more stiff?
its the most balanced (has some flex to it, but not too stiff) and will sound fuller than PC
Seems the pcb is not touching even with the plastic plate on
damn you guys are the wikipedia of discord
its like the perfect balance of clack and thock in a plate imo
a-and i disagree once again.
alu is the default imo 
thx guys
I dont like geon FR4 so there are differences across keyboards for FR4
what you're going to experience with venom FR4 and what I have on mine will be radically different @kind helm
different thickness changes things quite a bit
Yeah only one I heard it’s not is stock Wooting plastic case
Which is a Bummer but yeah
Aren’t you like a loud clack enjoyer?
I dabble
lol right
i do agree that fr4 is nicer for HE boards though. i think HE swithces are too loud, fr4 kinda tone it down a bit
last question, anyone know a page of keycaps in ISO?
it can sometimes tone it down (which is why im not using it for raptors), but going from stock PC plate to FR4 is going to make it alot more lively in sound
everytime ive used FR4 on wooting its never went too heavy in one way or another which is why i've liked it while maintaining some stiffness
I would say im more of a feel/45g long spring enjoyer than loud clack supremacist. if Raptors were like 10-15% louder, id probably have the near perfect switch
Fair. Nice
I’m still really happy with my Pom’s
Just want to try the new keysnaps in the frog mini tho
And need new plate to do so. Only reason I’m even entertaining the fr4 idea
could get those $7 matte PC keycaps that were shared here earlier: #🔧│keyboard_modding message
anything BUT switch selector/0.005mm RT
i mean we have already commented on our thoughts of sub 0.1mm anything
and the slight rework of the rgb sdk and bg service are not done by whos working on switch selector
the wallholders/cableing wasnt either
Propably implementing 2nd analogue curve would take same time as adding rick roll rgb effects

ive been trying to look for an FR4 plate in iso layout just cant find it
Because no one does iso
there is one but its been sold out forever
are you open minded?
will woot ever release some data on that?
like a blog post of sorts
idk tbh
but in depth into the technical stuff
like i think some (especially software people in wooting) would love that but generally the audience wouldnt want to read it
i wish
just put subway surfer on the side and people will read it. Am i right @tidal frigate ?
just high performance stuff
The should give us more colour options for the premium cable
zenaim too
I think it shows the expertise, even if not everyone would read it or see it as such.
i really wish wed do more technical posts
the real issue is i think not even 1% of our users would read it
not an issue
unless it costs woot millions to write
then sure, it’s an issue
if not, just see what happens
more like hundreds to thousands
since it just takes time from multiple employees to gather data, write it and review it
AI translated but it gets the message across: https://rakka.dev/docs/the-meaning-of-parameters-and-specs
DEFINE THE LIMIT. RAKKA – a team dedicated to delivering high-performance, high-quality keyboards.
ill keep pushing internally but i aint too hopeful
cheap, woot makes that a second so no biggie right? 
betterest
where is oiia cat
random question whats the return policy on switches from wooting store?
Can they be returned within 30 days even if they been used?
Yes. All products can be returned, if the return is requested within 30 days of the shipment delivery date.
thank you shafie
Shafie not all products
truly a scholar and a gentlemen

fellas when will raeds restock on divinikey
I’m not sure they’re even making them still are they?
they might have halted it while they make modifications, I haven’t seen restock on them in awhile
I’d just buy tecsee if you wanted that style of switch
do they sell it anywhere else besides their own web
Some stores stock it but I haven’t seen restocks of it in a long time
What’s left seems to be leftovers from previous stock
Is there a particular reason you want it still? Most people who tried tecsee and raeds preferred the tecsee version so far
They’re improving the housing to solve them being loose in plates. After that’s finished they’ll do another round afaik.
AliExpress, if you don’t mind paying the tax (you would anyway probably).
👀
lol
disc should add that you can send a message with a new time stamp
to separate topics
OR geon should put them on aliexpress

topre frankenswitching lol
I don’t know enough about topre to understand what that does
I thought topre had an entire plate as top housings right? not individual ones
i know a deltakey bag when i see one
put the switch in the bag
I think I saw someone lubing top housings like these, so ig they are separate like on most switches
Indeed
the fuck is this price??
Kind of a steal ngl
yea stealin from the consumers 😭

i thought fluxes were bad
Damn $4.50 per switch lol. Has to be a typo and they meant that to be for 70 switches
yes! I have this configuration currently.
edit: i misread and thought u meant if it was friction fit compatible with an o-ring. unsure about the friction pad
Have anyone tried everglide Skyline V3 switches?
They re pretty high in ponnie tier list
What tier list?
PONNIE

Man, so fr I’m copper addicted rn
Eveyone knows 5 stars is better than 3 flames!
But 3 flames is better than 4 stars
who makes the stock stabs on the 60he+?
I wish
Gateron
they use Chilkey’s meta it seems
nah these switches are all shit
can't be caught playing on lower than at least 0.00000035mm RT tier 🔥 🔥 🔥 🔥 🔥 🗣️
sell overpriced switches and include a couple in the prebuilt to up its value.
0.02 you say, so its time to put them back in the bag
$300 value for only just $100
I’d love to see an experiment of someone releasing the same switch with minor insignificant changes but completely different claims for each switch
nah they're thocky trust
Then watch the “reviewers” all feel the difference in the 0.005 one vs 0.05 one
waow, that bag, it better be 2x better than wooting travel case
from the top look alone, it doesn't look discreet like wooting's bag
tockh
Chilkey’s reasoning on why the price difference is so massive between the switches separately and them in prebuilts 😃👍
What quality testing are they talking about

Have you considered just getting your flux switches for free in an ill advised giveaway strategy
That seems to make people view flux switches much more favourably
I have soo much problem with the reasoning
rs7 users getting their shit fixed instead of 20$ credit when
meme ass company they should just stick to mice
They test them so intensely that the legs of the switches fly off
nah that’s just Vintage™️ Factory Relic™️
decided to try deepseek v3.1 on this question. First part is just 'is the reason sound based on that message?' and Deepseek answered "yesh". Now I revealed the 2x pricing, and flux defectiveness, this is its final answer.
Deepseek did quite well.
show your prompt 
Consider the following "The text" There's a competitor wooting who priced their switch lower than this company while still having to consider all of the problem shown. In your opinion, is this company lying to justify their higher profit margin or is the reason sound?
next one is But here's the problem. The switches the company sells is partly defective and 2 times more expensive. What do you make of that?
have fun
dear chatgpt, is this aliexpress listing legit?
Please and thank you
Yes, dear.
@tawdry tree well i received my overkill foam now i am waiting for the GB
cost me 50€ but is big so i can use on many boards like 20 or more
I used to ask kbdfans to put some stuff from their website on their AE store, actual "ok dear" experience
is this up yet?
ayy, nice CS
like asking a candy company to supply candy on your local store
that’s because there’s a reason behind the reason 
are their mice actually good? never tried them
foam more expensive than the case and PCB combined 
I told u the "flex" is very important
it’s a real and true stereotype. 90% of all sellers say that shit
unless you have a giftcard tho why not just use the site
So fr
sanctions
preorders rn I think
yep: https://www.atk.store/products/atk-rs7-v2-aluminum-hall-effect-keyboard?variant=46777913016538
He can’t
Is this pc switch plate: https://wooting.io/product/60he-pc-switch-plate?Layout=ANSI+Kit&Color=White (in ISO Layout)
Compatible with the Tofu60 Redux?? And do you guys recommend getting the plate for a more thocky sound??
yes to both questions
but if u bought the module it already comes with a pc plate
I am kinda scared the extra pads are going to make the keycaps very elevated and make the switch visible
they are just okay
but good for the price and availability (they are available in physical storefronts now)
definitely a proper logitech beater
what pad
sure is and it will make it deeper pitched
im running the black one on tofu redux and i love it
The extra apdding it comes with the plate kit
Simon didnt do this. this was Diogo and Passcal (and I sorta helped) :D
also for max thock do the foam sandwich pad not the silicone
Can you send photo to priv?
sure
your just gonna have to take my word for it that theres a black PC plate under there 🤣
Lmao
pineapple yogurt not included
Oh and also the elevation does not change with the plate
You do get a little more flex if you push down which equates to a softer typing feel that I prefer
Huge, thanks for the info
Np happy modding
as long as u put the normal amount ur fine
the switches wont be visible
a fellow PBTfans crosshair fan
you have good taste
Gn
ditto 🤝
i deadass thought it was an SS of my keyboard at a glance
It's a pretty popular set actually. It's what tenz uses
oh tenz uses this?
putting this set on my wooting rn
will rank up tonight thanks to this
Silksong is actually comin out this year
U can finally edge to hornet while playin her with ur joystick
yo i cannot for the life of me unscrew the last three screws of the backplate
im trying so hard not to strip them 😭
u plan to get this? https://www.qwertykeys.com/products/neo65-sonic-he-hall-effect-custom-keyboard
wish it had a knob
why is it $9999
LOL
i can’t live without arrow keys
Last time they said they had a self-developed HE solution, they lied
any chance you are open minded?
tactile gats at the Gamescom Gateron booth

my 2 week keyboard modding phase just started where i either go through with or debate spending hundreds of dollars on mods for a 60he
surely the emeralds have to be good as something new
Expecting gat to make a good he switch is like expecting jakub sayin true info
Not happenin
Should I get Sticky Rice, Raptor, or Duhuk Lumia Herz. Ive been on base lekkers since july of '22
Raptor V2s if you want best overall stability + clean sound, Lumina Herz/Owlab TI HE are also nice depending on what you're looking for. Wooting is also selling their new Tikken switches by end of year, check the pinned posts for Sno's test(s)
sticky rice is super old and definitely not up to par with any of the recent ones
good to know
Im on the fence between Raptor v2s and lumina herz then, i cant find a comparison though anywhere
yeah dont think ive seen anyone running them aside from when I joined in summer 24
check Pins
Sno has a test with all current gen switches
i think i like the Lumina Herz/Owl Labs Ti the most. In the video i originally saw comparing those two, i could hear a noticable difference. Unfortunately the Herz are out of stock everywhere and i dont want to settle
yeah get the Ti HE then
I assume nobody would know when the Herz would be back in stock?
unless aliexpress is trustworthy
just order from aliexpress, nothing wrong with any of the vendors that have decent reviews and sales history
Whats the difference in 700gs and 900gs?
tyty
i can already see the stem wobble on the tikkens DX
🥀
i got those and a switch puller set ty
they're bout owlab ti he-ish level
i'm still curious to see how raptors perform long term because joshiba said he had some friction issues but none of the rest of us have experienced it. so wondering what caused it for his ones
randomly it just happened again
same W key same switch different key cap set
can confirm the sound comes from the switch itself this time
the second recording comes from me holding just the switch and wiggling the stem as it is pressed down
Oof, it creaks harder than 80he plastic case
is it just that one switch? Or have you experienced it with any other keys
most noticible on one
i just double checked all of my keys on my 80he, couldn't get any to creak like that
i am checking what is causing the sound rn
alright
think i know
the spring is rubbing against the bottom housing
gonna try lubing the spring a bit and see if that helps
nope doesnt help
maybe the tolerance on this particular one is just fcked?
maybe we could use smaller diameter springs? like TTC
I wonder if it’s the spring or the housing tolerance there
not sure, because they did make a smo curve for the spring it seems
looks like i am not the only one actually
thats on geon's dc, the cause(wiggling when pressed down) is the same, and the sound that it produces is similar
i feel this might be a spring issue
it sounds like maybe the stock spring just has iffy tolerances

well on bright side that's an easier problem to fix than housing tolerance if so lol
true, i am already hoping they just send me a better set of spring as replacement
🥀
Can never win the spring war
where did you buy yours from?
I’ll probably replace the stock springs with Woot POMs. They’re pretty heavy, but good.
yeah would be dope if these fit and fix the issue
you notice any difference?
I don't have them yet
Then surely this means that a massive wootility update with a bunch of new features is coming out this month yeah?
An instant recolor too 😭😭
They’re the same dia. Didn’t notice anything when I first tried it on the Astrolinks
same thing for the Raptors
Oh ttc switches are here
raw case spotted
Perfect amount. 20 of each is enough to do a proper sound test with the sentences I type
elf kings sound is solid, although there's definitely more wobble than current gen stuff on them
That’s what I said
they have more wobble than the jade pro for example
honestly though i don't find any big leaps in wobble going from jade pro and onwards. Ti HE and such have minor improvements but it's not as noticable as the gen before that where we went from jade to jade pro
up until raptor v2 came out that is
That doesnt look like the gamescom booth 
only our EU folks are at gamescom
About plate: My desk is too thin for the copper plate, which makes absolutely everything go into crazy resonance good thing I got the Keebmat
it's okay i shall be at next wootstock
And copper actually sound pretty good with fluxies, helios and POMs(Snakes especially)
so you mean the issue didnt go away or you dont have the issue in the first place
No issue when using a TTC spring in the Astrolinks or Raptor HE V2s
didn’t notice the issue with Raptor’s springs yet but I didn’t really get to try them yet
soonTM
later today prob
Some minor updates to the switch recommend list. Tikken added now that i've had a chance to try them properly, spring length added, helios changed to no factory lube as i thought that was more correct. Polar pro will probably be swapped out for gateron spark once i've had a chance to confirm that the top wobble on sparks is slightly better than polar pro
Maybe change Helios with Wooting POMs
they honestly feel same same to me, but technically helios has the 'better' magnet
🤷♂️ POMs would be better there imo, especially when Wooting sells them
i'm trying to keep list as impartial as possible, so i'm not adding any switch over a technically better switch just because we sell it
sander going to send me his sparks now just in case gateron package takes as long as ttc one lol
does somebody recomend a PCB for building a 60% custom hall-effect keyboard?
Wooting 60he or geon venom 60he
thx
Wooting if you want reliable good and warranty, venom if you want slightly less reliable but still good and dont care about warranty
alright i´ll take a llook at them
Venom also has more mounting options as it has o ring cutouts for mounting in certain cases
The balance of the switch world was altered when the rqptor v2 was born
Price leak on the tikkens
Consider waiting for 60HE v2 module
Didnt realise the helios were that expensive
lol that price range is like the entire range of all mid priced switches
since i wasn't sure exactly what we'll price it at
tikkens are going to cost money leaked
Smh tikken not free with preorder
i don´t know if i should mod my current keyboard (ISY GK5000) or if i should buy a 60% hall-effect keyboard and mod it cause the second option is (veeery expensive)
Guys, I'm going to customize Wooting 60he, so please recommend a silver color housing made of aluminum that can be purchased on AliExpress or Naver
Gt-60, frog mini leggera
Idk if leggera is available on naver or aliexpress but it‘s from a korean shop
There‘s also the tofu from kbdfans if you want something super basic
i´d say tofu from kbdfans, it´s good
There are cheaper but still high performing HE options
silver leggera on aliexpress has been out of stock
Nah, you can get a prebuilt from Ali for as cheap as $50 or so
AULA WIN60 was pretty good iirc
oh thank u for helping
np
Nah Helios is da best
noticed the same sticking issue that Raw HEs have right away, they do seem very stable though.
What's the name of this switch?
The BSUN MMD C1s
ah
It arrived 👀
Find a crunchy Raptor v2 and see if you can fix it with TTC spring
more like BUNS*
Find all the crunchy raptors and maybe we can pool then together and build a crunchmaxx 60he
@fluid ravine should I try rawhuks?
If you have both raws and duhuks then yeah
Otherwise no
what’s the gimmick of rawhuks
I realized that with the copper plate I need something clacky, but getting Owlabs feels a bit too easy
Flux
Fr
But my bank account is being preparing for Tofu TKL
And gmk copper
I'm using them 

duhuk herz?
Same as ti’s
fair
with magnet issues too😭
They don't work well on some keyboards
yikes
On Wooting it's fine. I had one switch with very strong magnet but that's about it.
i feel like duhuk herz would be better than tis here?
everyone i've talked to has told me that duhuk herz are literally just owlab tis but better
duhuk herz are a recolor of ti he basically
okay i see
u can get duhuk herz for cheaper on aliexpress, or at least i can, so it's a better buy for me
Like arc said it’s just recolor. People just decided herz is better within certain circles but they’re basically same
oh okay
You’ll find the he circle is tiny with same maybe 5-10 people repeating same opinions in every discord. So whatever they say tends to look popular even though it’s just within that small circle
so i should just get whatever is cheaper for me
Yeah
I don’t even really know where this they’re ti he but better idea came from because I have both and they’re practically same
I feel one person said it once then that group of folks just started repeating it everywhere
new aula switch
Sticking at the top?
Friction
pity
i feel we're entering slightly dangerous territory where the meta became 'which is more stable' but we've entered the 'more stable risks friction/tolerance issues' territory
Raptor v2 might be a limit
WS Dashes 
Yeah, because of lube getting squished between the flat part of the top housing and stem, so not friction. Just the exact same thing as the Raw HEs have.
You can wipe the lube off from those spots and it’ll be gone.
Gateron back to school sale😃
👍
what do u guys think of jade airs?
btw just tried pingless on raptor v2
doesnt work
the spring is rubbing even more against the bottom housing
scratchy on key stroke
What kind of lube do y’all using for stabs?
just 205g0
This problem is only happening to you, as I understand?
205 i use
POMs still goated for me
Hii
How do you know if you haven’t tried anything else 
No other POM material switch
Only thing on my list is the polar ones
Not a big deal
This is just personal preference, I like the feel of POM on my CF plate
full POM doesnt really do anything besides make it 100% opaque
I dunno, but they feel ‘softer’ in a way
Like the pom material just hits the CF right
And its a more muted clack
Again, all personal preference
so we’re just gonna ignore gateron’s truly fantastic full POM switches?
A self lubrication denier I see
Serious? Haha
I thought lameron dropped the ball
Haven’t you tried their marvelous Orsh*t switches yet?
No, Im not a man of culture
Well, it’s your lucky day. Shafie and I have some left over, you need to buy those
help us out
😂😂
I cant tell if serious loooool
Guess they must be dog sh**
dual rail
They are full POM tho
🤮
I love POM but not shamelessly haha
self lubrication is a burden upon the complexity and price of a switch you know yez?
yep, that’s why there’s a self lubrication POM material tax on all full POM switches
+0.50usd
🥰
New fluxies are here https://shop.wuquestudio.com/products/ws-flux-switch
$1,99 per switch
Insane
$74.91 to be kinda correct(35pcs, inc 10% discount, TAX + shipping
should i buy a Wooting 60 HE now or wait for the Wooting 60 HE V2?
Wrong, Fluxies are budget compared to these (not sure if you saw this already).
Only a few more months.
BRO THATS JUST EXTORTION AT THAT POINT
wait?! 45 DOLLARS PER SWITCH?!
Per 10
Per 10
4.5 a piece
Actually extortion bro
These better be CNC machined pieces of plastic for them to be this expensive
They better have the tightest tolerances I've seen on any switch
it’s a recolor of a switch that costs $0.65
😃👍
I forgot what they are called but they do look peculiar
nahh
Unionwells
Holy hell
yep 😭
is that your collection?
damn
I do have them tho
ah okay
I say that as I've also spent 5 figures on furry arts but we don't talk about that
i`m pretty new to modding
Hey whats the best starter kit to get for modding the 60he
can someone link me anything legit dk what to get
Depends on what you want to achieve
I mean im not looking for insane asthetic
like i want a clean ass look tho
At this point, I can expect Gateron to crank up the price of their brand new tactile switches
Go hunting for some cases and keycaps!
Find something that you like
Mind telling me some sites that are compatible with the 60he loll
Any 60% case with an O-ring or "gh-60" type mounting system will work with 60HE
Perfect thank you
all MX keycaps should fit
Cherry profile caps you might have to flip the switches around to south facing but that is not the end of the world per se.
Look on KBDFans for some inspiration. They have the Tofu Redux, GT-60, Holy and another one
that’s for cases
they have many keycap sets too.
Thank youu
though all a bit pricey, not sure what your budget is.
i think i am right tho lolo am i right?
Nah not an issue anymore on any switches that aren’t prehistoric 
You’re right, yeah.
Ok good
All MX “+” shape keycaps will fit.
alr
We don't talk about the MX "| |" type low profile keycaps

Of course you have to keep your layout in mind too when buying keycaps.
I forgot what those were called again, was it actually MX too?
i definitly need new switches... i have outemu red
There is like a shorty version of those too for the newer low profile gaterons
I think older Gateron low profiles called it MX
I’d keep using the board you have rn and get a V2 later this year
yup and then mod it aggressivly
i love them clicky switches
nono, if you’re too aggressive with it it’ll break!
like the TTC GOLD PINK switches
noo it was not meant like that, i mean just mod it really much
haha ik
the bad thing about my board is that it`s not hot swappable
clicky and clacky are vastly different. clicky means that there’s an actual tactile bump and loud click that the switch makes
it’s fineee
but the 60 HE V2 will be🥳
yea i know but a bit more work
yup i love that sound and the bump😍
but i think the 60 HE V2 will absolutly BLOW UP my budget
haha, yeah it prob will
r/brandnewsentence
Silksong in 2 weeks 😯
expect like $210-240, it’s probably gonna be around that. I think $220
how about 350 and a coke
still cheaper than ATK switches, I'll take it
In my opinion, absolutely everyone considering buying these switches with delivery should choose Mark’s services at least it’s not such a pointless waste of money
But unfortunately, he only delivers Wooting products
I heard there is balder option
Costs twice as much and you have to listen to a 4 hour rant about "something"
Is "something" the incredibly corrosive nature of gamer sweat?
How much simon keyboard delivery costs?
Don’t you love it when your friend with toxic waste sweat comes over and touches your 80HE all over the place? 🥰
i treat my keyboard better than i would treat a child
After seeing the state of some of my friends' keyboards, they are permanently on the no-fly list for mine.
This is why I pull out dated keyboards when icky ew ew sweat people come over, and lock away the good ones
not sure if I should be happy or concerned..
10000% the latter
or am i?🧐
🤨
right..
I found it. NSFL, and no this is not pulled from the internet.
THAT-IS-DISGUSTING
who ever that board belongs to need to be in jail
i agree
the whole house is contaminated too, for sure
Natural pe foam bro
This is how he thanked me for giving him new keycaps. A glimpse into pure darkness.
rip to those keycaps
100% organic 😭😭
too organic
i feel sorry for those keycaps, keyswitches and even for the PCB
call for backup
How is it in every single key in such high amounts
make it airborne, yes!
Bro made sure to spread it around😭
he doesn`t know that stuff exists
Just keep this in mind whenever someone shares a pic of here and you think of being like "
I see a single hair"
now wait a minute, looking at the spacebar’s shine, this is the board of someone that presses space with their right thumb.. who could that be? 😳😳
That one time I posted a pic of mine with a single hair on it
And literally everyone pointed it out😭
Why are you looking at me like that
Cough @sacred elm
Folks around here are brutal
deserved!
also someone that eats while playing😫
a single hair is unacceptable
you`re right
I work with a guy that has alopecia, y'all would love his kb
I think someone that uses his keyboard as a plate
I actually don't remember that 
Yes, that is in fact a large contributor. I often have to ask him to avert his mic when he's munching on stuff while we play 
Thr photo is on my other phone damn
SnaxxMaxxing - the new trend in #🔧│keyboard_modding
i clean my keyboard so often under the keycaps, i think i use my keycap remover more often than i use my keyboard
I just hit it with a DataVac every week or two and do a more thorough cleaning occasionally
Is this person living, breathing ragebait?
i js wanna get a new keyboard so badly
i mean i like mine but i think you guys understand me
You're actually not far off from the truth.
I have 2 right now, will buy 60he v2 and maybe one more another time
No idea what you're talking about
Wall of shame/pride pic incoming?
Nah but the collection changes often. I've now sold all 3 frog minis lol
now wonderin how many kbs are in ur collection now
Somewhere around 15-18 atm
👀
@tawdry tree the stem on the MMD C1s look intersting
that or my eyes are playing tricks on me
How they sound ?
no clue, think aligner is gonna drop a sound test later today?
I saw on a tier list they are very good
Please not the ponnie list again
He was testing them earlier, he said they have sticking issues at the top
RAW HE all over again 😕
So dont listen me 😂
Oo asus announced the 540hz oled with glossy coating
Is that the tandem one
Yeah
Don't think my bank account is ready for that
I don’t love the color though, prefer black for the border so you don’t see the border stick out when watching dark images full screened
Not sure why they went with a light color case
A tandem OLED on the desk would be very cool
They do have this lower refresh rate version which is also glossy I believe
I need it to be 5k/2k instead of fixed 2560x1440
Settle for a mere 280hz? That won’t do
After seeing the iPad pro I just want those insane colours on my desk now
Hopefully without paying xdr type money 
I wonder if there’ll be an lg version for cheaper like always
Although asus tunes their srgb mode way better than LG
Probably they usually come out a little later
I always found the stock LG srgb mode a little yellow
Ips 🥀🥀
I want an oled display so badly lol
Hey the longer you wait the better they're gonna get 
yeah.... besides Im using a TN panel display so like an oled would be an upgrade from the heavens, I refuse to upgrade unless it's an oled
A 32” 4k 120hz with cropped 27” 2k 540hz would be the dream actually
Perfect editing and gaming in one. Like upgraded version of the one that’s available right now
I think the 5k/2k dream @stray tiger has would be ideal 
Its coming, there have been some teasers already
I don't understand people that have 32" monitors, like bruh that aint no monitor anymore thats just a small tv 😭
For editing video and images it’s real nice
Just give me a pro display xdr with gaming features 
You fit your whole timeline easier
yeah I get that but for gaming???
a bit odd
To Big for me
The maximum for me is 27
27" 1440p is gonna be the norm soon
It’s usually people who play wow or solo rpg type things where big screen is immersive
I might just get an iPad pro anyway because damn that thing is thin and the screen is gorgeous
nothing like getting my ass kicked in elden ring in 4k on a big ass oled display 
been like 1.5 months since I fully modded my 80he and I still catch myself fidgeting with my keyboard because it scratches that certain itch in my brain
I have a 32" monitor and it's nice for watching videos and coding
wish it was 4K and oled
would be epic
ive always had a 32in monitor (i may have just realized that it was 32in) but its not like playing games on it is all of a sudden unplayable
prob getting a 27in 1440 oled at some point to be my main monitor though
I also went from a 24" to a 32" took like a month to get used to but now its fine
my laptop has a 4k+ oled but 60hz 
my 80he is like $450+ already........... but... ordering more stuff doesnt sound like it'll hurt...............

Mine cost more
I have issues
Do not go into financial hardship over a keyboard
You‘re a little late
I kinda want new stabs… and I still use the cable that comes with it…
And my gt-80 case supports a strap…
Sounds like there’s money to be spent…….
Need that Optimum 60HE v2 asap 
Dualshot looks nice on Optimum 
Looks so clean
dose anyone know what to do if my keyboard got here and my switches are not in there
how do those work
Did you order switches ?
Can you show a screenshot of your order summary?
rhythm game especially if you play with big ass controller.
like, if you ever gone to the arcade filled with rhythm game, most common monitor size would be 32 inch.
43" and 32" here 😂
Damn that’s clean
That Raw is amazing looking
Gn
Gn
ive already spent like 500$ on my 60he i think i have a problem
what case is this?
GT-80 from kbd fans
on a 40%
Ooo looks nice, is it an alu case or something else?
marked by geon?
Looks really nice, might be the case I go for when I do my 80he build when the tikkens come out
100% worth it to never have to deal with case screws again imo
not that it would matter much to me, literally only going to be taking the board from my current 80he and transfer it over to the GT-80
and ig in another two years when id have to relube my switches
Are these the hyped up ones
I don’t think anyone wants to hype up gateron
how much that switch going to be 
i just bought 1000 of them! glory to gateron! 🇨🇳 
tactiles
Lameron lol
ATK x Kailh on sale 22nd Aug 7pm china time, 15 yuan each 
flux level pricing
lit could be $2.5-$3/pcs outside of china
on that table the original version would probably work better :)
you go with the original, not with the knockoffs ;)
Yeah, I managed to partially fix the issue with excessive resonance, but most of that resonance comes from the fact that the desk I was recording on is too thin
yeah the reverb on that table is strong :D
What is the selling point?
oh shit, wandrd is doing a sling v2 @ionic breach https://www.kickstarter.com/projects/wandrd/rogue-v2
Specs USB-C interface 1.6mm thickness Non-Flex cut Support Per-key RGB and RGB underglow Hot swappable PCB Compatible with Holy80 Case Polling Rate: 8kHz Scan Rate: 18kHz Theoretical Latency: 0.125ms Include PCB x1 Daughter board x1 Friendly reminder: The JST cable is not included. This PCB is designed exclusively for
@kind helm a couple of mine are crunchy but rotating the spring seems to help
that’s in hand

but the rest of them are fine?









