#🔧│keyboard_modding
1 messages · Page 691 of 1
Gateron what
Oil Kings are mech switches
Uncompatible
Wot
they're not compatible
Youre good
😅
king covered in oil, oiled king
yeah u need hall effect switches
Check Owlab Ti He switches
for HE keyboards
@stray adder #🪛│modding_faq message
@fluid ravine it worked
its still a 3.0 uber long pole switch, but full brack
Holy shiz

Alr hurry up, I want sound test 
Trying to find as thocky switches as possible, considering building a Optimum Wooting keyboard 🙂
Thanks!
There is no "thocky" hall effect switch
also
are keycaps alot easier then then case to do?
Ah ok ok
Tikken 
keyboard sound isn't only determined by the switches
raeds better
it's determined by a lot of shit

Only ogs would know
@fluid ravine crazylight ETA is 12 😳 cant wait
Can't believe that mod is still in the modding faq
Shhiiii
- what's the case made out of (aluminum? wood? plastic?)
- what's your plate made out of (FR4? aluminum? brass?)
- what are your keycaps made out of and what is the shape? (ABS? PBT?)
- what are your switches?
- what other mods do you have (masking tape? foam? etc.)
im still on binjutsu bora v2
it's not just the switches that make a keyboard thock or clack
Miao ahh mouse
what are your insights about geon raw he and gateron jade pro?
Owlab ti he
owlab ti he
owlab ti he
owlab ti he

so called free thinkers when owlab ti he
Everything alr but please don’t try this combo🙏
Let’s make first tmr wooting
I think you should make a hole in your pcb for def mx switch first
I just need an HE board that feels and sounds completely like HMX switches
@sacred elm
so a HE board that sounds shrill and sterile
This right?
Fr
yeah they kinda already do that
hmx is bad
id argue but you like fallout new vegas and I respect that
this is not just my sentiment
this is a general sentiment
Hell yeeee
Now you can remove sticker from your cable(optional) and put module into case
literally every HMX sounds very uninteresting and homogenized
make sure to route the cable through the channel if possible
wheres that
under your foam
it could be the case but after being on HE for a long time I loved my hmx build
It’s buzzin
you should make a cherry build
🚬
im on mx blacks rn hehe
mine are fully stock mx2a, its a nice experience, could maybe use some extra lube
those screws are not in properly, I don’t even know if you’re supposed to use those screws
blasphemy

i hate lp so much because it just feels brutal
the recessed bit is for cable to be routed through it
Oh fr
the pole bottom out clack also drowns out a lot of switch characteristics
also make sure it isnt riding on the lip, that can cause issues
I think my preference developed once I got my og wooting 60he with lekker v1s which I hated even before first jades were launched
so I liked long pole ever since lol
you got raised on slop 😔
soon we will see a wave of vintage HE elitists praising ks-20 v1 wobble fr
just like cherry scratch
IT WORKED
yeah the purists will only respect lekkers which have "gateron" on them
vintage 2022 lekker v1s (authentic proof on 2022 wooting 2he production date)
use the black ones that came with the gt-80
and omnipoint v1s will be the new vintage 80' mx blacks
holy grail
both have hella stem wobble and are scratchy as hell
surprisingly similar
they are the same..
fixing it quickly
😭
and at that point gateron will still make jade pro recolors
pretty sure omnipoint v1s are an earlier batch than lekker v1s no
they’re an earlier batch
iirc they even came without lube
but no difference as far as I can tell
#AUTHENTIC
the omni points have a hole in the top housing for the LED as well
slight difference
@tidal frigate new ergo just dropped 💀 https://youtu.be/Eklg7CKs57A
Here's my exploration for a wireless arm-mounted keyboard idea. 3d Printed, Hand wired, Runs on ZMK.
Read more here: https://adamleblanc.page/portfolio/schist01/
lmao
ergo crowd be doing all this to go back to a normal tkl 2 months later
i know because i was one
my wireless custom sofle w/ oled goes hard 🔥
ergo is cool but its still far removed from normalcy
@cloud pivot lord forgive me but im disassembling these rbo 4.0mm travel hmx switches just to use their upper housing for another switch
inb4 it aint fit
nah im just autistic and want to make my geon extreme gaming mx switch fully black
- what's the case made out of (aluminum? wood? plastic?)
aluminium - what's your plate made out of (FR4? aluminum? brass?)
not sure tbh. I was thinking buying the Optimum bundle - what are your keycaps made out of and what is the shape? (ABS? PBT?)
PBT Plastic - what are your switches?
trying to find out this one - what other mods do you have (masking tape? foam? etc.)
at the moment, there is only the friction pad that’s included with the 60HE module, and I’m thinking about some masking tape
Wata chatgpt quiz
im just
telling him what kinda shit determines the sound of a keyboard
and that switches alone won't get you a "thock" or a "clack"
open it an look if your foam fits good
i have the same case
and look at the cable in the left edge in the case,it have to fit
theres none left
for that bit
its empty
i think its where the bit from the
cable from the othetr
board
take the full part off, then put the bottom side first and then click the above site
huh?
ok now put the pcb in
when you put the module in, double check if the cable is in the channel or not
?
send me the same pic as i did
Put the module in it, look that the edgeds fits perfect in the places for it
what about the top
is the module flush with the case
The rubber piece
Also please unplug when you‘re working on it, makes it really hard to see when rgb is shining everywhere
Take out the rgb blocker
could be the blocker. take the other RGB Blocker. it s nicer 😉
use their rgb blocker
its included in the box
this is causing issues for you
Stock from 80he?
yea use this @robust ether
You can use only 1 from wich comes with gt80
look here. put that original one from wooting away. take thatm which came with your gt 80 . an put it in the top cover
you can use either that OR the diffuser
Depends what kind of bar you want
the rubber piece that selo and i have in
on the top part of the case
i am not using the light blocker as you can see in the picture i sent
dies plastic piece in the cover.
this should be the cover for the diffusor. you don t need this. put that other diffusor directly in your top cover
like here
alr
which other diffucer
?
yea
i got the other one
and it doesnt go on top of the rgb it goes in the little slit on the metal piece?
is that what you mean
ok put the other one in the cover. not in the hole in your module
take this off
this place have to free
?
yeah now thake that piece of your module. look at my picture
whats that
you have the other piece here. take it of. you don t need it.
ok. now try again to close the cover
yeah great
you had 2 diffusors in it. that was the problem.
Have fun with your keyboard
this is only the cover for the second diffusor. you don t need that
thats like a dust cover
but not the keys
yes, go in wootility and then light indicator
yes with your wootility software
you can change the brightness or disable it
ty
mine is in german, but follow that way
Here’s the pics of my mx kb if u want #🔧│keyboard_modding message
Don't worry @sacred elm i didn't miss the 20% aputure sale
you might want to grab one or two for yourself
High rollers in here 🥵
Hey i am new and just open website to buy my new keyboard. Right now i am using Razer Blackwidow tournament chroma v2, and thining to upgrade to wooting 80he module ( its going to be frost with white caps), but i dont know which switches to get lekke switch v2 45 or 60 or others, usually i play league of legends and Cs2
You cant go wrong with either if choosing them as your included switch option. The only difference is the amount of force require to push down the switch. The 45's are slightly easier to press.
i was wonder because price different, i currently using green switch on razer and they are not removable, also can you tell me how much gona take to ship to bulgaria and is shipping free
hi if you free can you please answer me 🙂
I cant answer that question I'm sorry. The website should show you all the details that you need during checkout
thank you sir have a good day 🙂
These look clean
What material are they?
Titanium
But really
Those purples would look nuts in my purple salv
Not a bad price for the 80% set too tbh
I feel like the case they come in would cost more alone in some parts of the world 🤣
Hey yall so I recently got my wooting60he. I bought the aluminum case with it and the gateron jades for the switches. I wanna mod the keyboard but I have no ideas on what kind of mods I should do to them. Any recommendations? Stabs? Lube? Different switches? I want it to sounds wayyyy thockier potentially.
try a tape mod with 2-3 layers! I would also suggest getting a friction fit pad and screwing in at least 1 screw if you use a metal case with no grounding sponge (IE Alumaze or Tofu60 Redux)
@calm pulsar
inb4 they have fitment issues with switches
or even worse, crooked stab keys
would be hella fun straightening titanium out 🥶
its cool and all but I prefer plastics
Imagine using blastics
Any recommendations on the stabilizers? They’re kinda mid rn
If ** used the set, chalk the keycap set
Yeah and I’m already lookin at a new kb to get 🥀
Ima get gmk for it this time
I'm unsure to be honest
frankening geon hmx switches is done
Don't make me this, I'm poor and now, more
Less than 24 hrs being back and we got more frankenswitch content 🔥
@untold wigeon They come with the display case from what I can see, dunno if that helps you decide 🤣
Hate u ❤️
gmk simply better
kkb are great too, same way of doing double shot, sound and feel very close
legends are crisp too
effectively same for me
Weird way of saying GMK betterest
But ok
Pop off MX KKB stan
i know sopme people say kkb sounds more shrill but i hear no diff
i love potato trays disintegrating
germans with their proper waste disposal
I already have crp and want to switch it up u know
Nuh uh
Tuan has em too but can’t use em
wait he got black snail beige ones??
Yeah but they arrived when he traveled across half the world
dam I go away for a week and my guy gets a goated set
@fluid ravine
og frog mini, benom
y waste fwog on benom
:(
i would save the fwog for a fire mx/ec build tbh
(yes ec builds are more of a thing now thanks cipulot)
my only MX pcb that I have is in luminkey lx60
so yeah
oh yuck
Wow @ ing ppl when it is 2am for em
So rude
lol its ight he has the red icon
most people here are j*bless anyways
imagine having a j*ob
I don’t get people who don’t instant mute every server
you still get the notification icon but no sound ping
yeah this aligns with my general policy for push notifs as well
i dont need them til i do
so i just turn them off until i need em
delivery, j*b communications, etc
Pls tell my sis this🙏
I'll be dead long before I need push notifications from the Wooting Discord Server
Everyday I hear that damn disc notif
i think more people should start adopting this tbh
being spammed with promotional push notifs from apps you dont need is kinda tiring
actually youtubers who use the discord notification sound also suck
that just annoys me enough to not watch them anymore lol
alarm fatigue goes hard
Arc's job is pinging all of us on Discord 
censor the j-slur please
*ust
Now you gotta change your name to Joshiba
Jo*bshiba
Unlikely, that man needed grant money and I think we successfully eliminated research from this country.
Rent free
I wouldnt take rent money from Joshiber
Forget rent, I built a villa for joshiba in my mind
not even black colored
flex pcb......
yuck
would be cool if those things turn out to be actually durable though
but i aint holding my breath
how many times can i open/close the frontplate/PCB in the wooting two
before the plastic gets fucky wucky
@calm pulsar whats it is next to ur name
Beon pilled
my goat
I have it under great authority beon remains until morale improves for Tsangan layout 60HEv3
I believe his case should be handed over to the inquisitors of our church, followed by hard labor
Trip to byseria
Be've gone too far with this
Byberia***
Bk
Bye Syria is not where we want to go
mmm, might take 4 more years before 60hev3
hope for woot numpad in the middle of that
cheese
im already in ХМАО
Okak
This makes it look like an organic city to form an 80he
the rounded holes next to the sharper angles look bad together😭
imagine holy case with sharp angles
like they have at the bottom
unholy
yall
i still need to know how many times i can unscrew/screw the plate/PCB
before the plastic becomes fucked up and evil
My base set is somewhere at home
Hopefully not stolen
And I have the alpha kit with me right now
i want to install a poron sandwich layer
Bootyful
polite way of saying it’s ass 🥰
holes in the top as well >
Stop this piece of shit always gets me

He’s coming for your good arm

Hide your GMK sets Mr mx cowboy
Long weekend, still recovering. Came home to some new artisans and keycaps in the mail though
New week starting gud, new mouse and ronin coming tomorrow 
Which mouse? I haven't checked chat in a few days except I see @calm pulsar couldn't stay away
New artisans from a trade deal I did
full aluminium rectangle is the objectively correct look for keyboards 😌
Binalmouse Ulx 🌹
is that you behind the bouse
😃
well it still holds up so w/e

@calm pulsar so what you brought you back to the dark side?
i NEED an answer...
he has a proposal for a new 10u spacebar
He has returned to improve morale for tsangan 60HEv3 
There is no answer here. It depends on how tight you turn the screws and 100 other variables
6.25u bottom row is peak sorry not sorry
so if i tie them like slightly loosely
i only like tsangan for the split rshift and bs
it should last like at least 5 times
those two have much more of a quality of life impact than the bottom row
When 20u spacebar
6u spacebar bestest
went to therapy, they said I can't be saved so I still like 7u
but I might get 60hev2 for the sake of Tikkens and also installing something in my frog mini
It will last dozens of times if you don't overtighten. I wouldn't stress too much. Tighten them down until you get resistance and then give it 1/2 turn more.
pretty sure tikkens will just be available separately
but jokes aside just missed this channel hehe
awesome
ok yeah that's way more than enough
i was just scared of fucking up the plastic case
It's ok to say you missed me. I missed you too
before i finish making a case out of aluminum
whats the difference between jade pros and the owl ti he? are the jade pros faster?
Stem wobble
@polar girder yes my picks are 💀
yeah but im from russia and buying wooting stuff is costly here, so buying only the tikkens might be not worth it
will placing a sandwich pad like this work
When he says leaks, he is referring to his need for diapers
y tho
ur gonna go through the same pain buying 60hev2 anyways
I didnt know you are that old
im not familiar with mods yet, what do they mean by stem wobble and is it really that bad?
No. You need the silicone pad for friction mounting and adding an additional pad will not work
I have underwear older than you!
it's for the wooting two
Jade Pros have worse stem wobble than Owlab Ti's. Also Owlab switches are cheaper.
what leaks
Ohh then ignore my comment lol sorry
I do not own a 2HE so Im not the best one to answer that one 😦
I see you are still using my old photo and not my new one
we now require leaks to understand what leaks Jakubix found
holy unc
TL;DR he looked at a picture of Mark’s scallion leeks and saw 10/29/2025 as official 60HEv2 release date
I think you need to email wooting and ask them, I doubt youll get any help here, almost nobody uses two he in this channel
Aka his Intel is 💩
It is not u tho
Oh but it is
wouldn't be surprised if Jakubix is already guessing what color
Guy on emote is youtube dinosaur and is total sigma
LMFOAOOO
Are you 
i am sobbing
and crying
where is my 100% gang
Its not about 100%, 2HE design is just outdated and impossible to mod, so nobody really bothers
<--- also a dinosaur but AI thinks I look similar lol
man
It is possible to mod, but it is expensive to do
im at an engineering university
Its not outdated, but it is harder to mod as full-sized isnt based on a universal standard like 60% for example
so i have all the shit to mod it
Your foam will likely work as long as its not blocking anything.
im taken if that's what you're asking

when i make the aluminum case it's gonna be the wooting two to rule them all
I think someone in this chat has already done it, but it's been a few years.
I think I saw some oil prince looking two he, with gold keycaps and custom case
🖕
lol I was expecting this
@stray tiger do Tikkens bottom out on stem or rails? I need to know
Wasabi has one. Ask him to dissassemble it
Sorry can't talk about the internals yet
There's always one
bro was expecting more for sure
all right all right
We have a few Bruno's in here and only one spelt "Brun0" 🤣
going back to the vid they seem stem bottom out, so I hope for that
rail >
this is cornball asf
I mean discord is linked so they'd know if he bought one right? So future sweepstakes would get stopped or am I wrong
surely
@uneven cradle Is that how the discord and Wooting site works?
I doubt it matters much tbh
it could be that he was disappointed and returning would cost him quite a bit
"Ordered as part of the first sweepstake but have decided to wait for the 80HE version to come out, hence the sale."
🤷♂️
I wanna bid high to see the reserve price and then cancel my bid
I don't get why he doesn't return it? It hasn't been 30 days since it came out, no? 🤔 sus
Not the kind of information I know sorry
To try make profit I'd assume
But one would assume so
Oh it's a bidding, I thought it was fixed price, fair
Either to make a profit or to not lose as much. The return shipping from UK to NL is prob quite a bit.
@tawdry tree I could make another Owlab and see if that one has issue too with the back slider 🤣
Really? they are super close. Unless there is some customs complications there
oh yeah
how do yall clean the plate
is it just take out all the keycaps -> wipe it down
you can tilt the board on its side and shake it a few times while holding the vacuum cleaner at the edge 😂
NO
nah keycap shine is like relicing guitars
I usually use one of those blowers for electronics, same I use for my PC, since I mostly have dust
gunk is gunk on guitars as well
based
(it doesnt rot though)
Hey guys, im looking at the 60he + module and was wondering if anyone has good keyboard case recommendations
maple fretboard?
rosewood
so its already hard to see to begin with
i do plan on getting a scalloped finished maple neck to not gaf about fretboard gunk altogether
I got ebony for the first time so not sure how it'll go in terms of gunk
probably even harder to see than rosewood
do still clean it fairly regularly tho or rot/warping incurs
i do mine every 6 months, the equivalent of roughly two string changes
i wanted to make a case out of ebony
what guitar you've got👀
MIM strat with warmoth neck
i played out the frets on the neck it came with
and refretting is more expensive than just buying a warmoth neck so :ppp
ohh warmoth is nice
I had a 97 MIM strat while i waited for a custom guitar and later found out the strat has a neck warp, rip
so had to sell it
yeah unfortunate, guitars can be so volatile
warmoth is very poggers though thankfully
I’ve escaped
NO
Dw it’s safe and sound in ur room
lekker tikken pls wootin now
Not happenin anytime soon
I just don't like the feel of 3.4-3.5mm bottom out
I make so many typing mistakes
Hey we still like keyboards in here, right?
nah
Most of us do but some people... I dont know about those folk
lol if 3dMax beats Faze I still have a chance
W
long pole haters rise up
Not me, I'm out
Yeah most people are pretty hard fucked
I still need 3 winners to happen
CS pick'ems. No cash prizes, just bragging rights and a collectible coin
I'am glad falcons lost
Who tf is 3dmax
Yeah its pretty easy to hate on Falcons so I feel that lol
French team lol
Almost everyone had them to go 3-0 only to go 1-3 lol
G2 major winner
Would be funniest thing in world
If youre not cheering for Vitality just for the fact that it would piss off S1mple, then we cant be friends.
i dont watch pro cs anymore but when did they become a t1 team
are they like good
~2-3 weeks :)
I want hades and snax win major
Let Poland have major winners
Wake up
Anyway did you cheer some teams?
FaZeUp
i can't seem to find a manual calibration option, what are we supposed to do when swapping out switches?
is there no option
It auto calibrates, manual selection coming 
okay, the switches i have are these https://shop.wuquestudio.com/products/ws-flux-switch
shouldn't be any problems right?
Well I personally wouldn't recommend them due to the price and QC issues. But Wooting is actually the only board I believe that actually supports them properly at the moment without issues
i already have them lol
D sent me them
didn't have to pay anything
haven't heard of QC issues tho, what problems are known?
There wont be manual calibration for these, but auto calibration works fine on wooting
They break when you remove them
i had them in my venom before i swapped back to my wooting
none broke
i think people might be too rough
need a womans touch ig
😭
Just bad QC even D admits that. Can't really check the magnets but don't need to worry about the magnet strength has issues on venom but no issues on Wooting
Something about some of the springs not being demagnetized properly
ohhhh
that makes sense
i'm excited for the lekker tikkens
Wooting has
auto calibration
I believe venom does too just maybe not as dialed in to detect those flux variations
probably going to sell my tofu wooting build and just get the 60hev2
venom is a good PCB but not being able to turn off 8k was a dealbreaker for me
some of these lan PCs are mega dookie
They just best Faze and made it to top 16 of Major (biggest tournament this year)
I just need heroic and B8 to win tomorrow and I’m chilling for Pick’ems
Crazy there’s still hope for me lol
so pretty good
although i heard that vitality are like the top dogs rn right
Hard to break that top record from NiP
https://www.rtings.com/keyboard/reviews/mchose/ace-60-pro not bad for a $20 board
Anyone know where I can order a few (4) foam plate gaskets?
Ended up cutting mine up to make a hybrid mount and wouldn’t mind having some spares. Preferable wooting specific ones.
didnt they go through an entire year without losing a single game
What are the best switches rn
Been using the l45s for awhile but they’re getting a bit worn out
Are the jades the smoothest / thockiest?
Raeds 
No
There is no "thocky" hall effect switch
Owlab Ti is the go to option right now. Good stem wobble, clean sound, affordable.
87-0 without dropping a map
222 day win streak
Without dropping a single map?
close enough
i saw some of their old clips
looked like they were smurfin on t1 teams back then
ayo having 4mm switches on stab keys
smart
that way you dont have to use spacers to fix seesawing
The jades are more marble like. Like if you ever played around with mahjong tiles its literally what they sound like. I like them but it depends on the person and sound signature your looking for.
Thx fellas
I appreciate the insights
When I built my tofu 60 there weren’t so many switch options lol
I had long pole stabs but hated them. One because they were durock and two because when typing fast it always felt like I didn't have enough travel. Thanks for recommending the WS Stupids btw. They feel great and don't need stablizer foam.
im kinda surprised you didnt find the oddly silent spacebar weird but yea np
personally they creeped me out so i moved onto knight v3s
no rattle and fairly normal stab sounds
Those where the days. The options were either the Jades or Ks20s. I think the closest we had to a thocky switch was just getting jades and adding film. Then over lubing the heck out of them.
jades are filmable? 🤨
not quite tbh ive had a few jades with loose top housings
perhaps the old ones had bad tolerances and are filmable
i have some black jades somewhere i could try tx films if u want
If I remember correctly you could just jam it in there. It works? But i think overlubing was what got the sound signature down.
What are black jade? Are they like jad maxes or something?
they are shit and i regret buying em
i didnt even know black jades were a thing
Black jades are just OG jades recolor, nothing fancy
they were rly old and are rly bad https://backspace.zone/products/black-jade-switch
somehow ive never even heard of this back then
heres what they sounded like
ik prob my worst kb purchase ever
Thocky 🔥
Fluxies laugh at $1/sw
65 of those for a tsangan build could probably buy me 3 nice steak dinners
Damn steak dinners are cheap where you are
That's what the normal jades sound like. So yea if your don't dig that tone then go for the owlabs Ti
i would say tis are better at clacking tbh
not as shrill because the tolerances are tight, but the overall sound signature is cleaner
yeah they already in my he build
Wait just listen to some owlab TI
i went from those jades to raws then ti he
raws 💀
yea @cloud pivot is right it be a clatter box too.
this is basically my final he build
Overlubed? Or just dry?
"polyfill" 😭😭😭
the latter i think
it had this weird sluggish sticky feeling at the top
rather use that then foam
fair
Sticky is usually a sign of overlubing. So thats weird. When I was trying to chase the "thocky" jade tone I remember putting enough in a switch that it would slowly creap upwards.
merino wool > polyfill > foam though imo
Felt and Wool sounds good but I hate when I try to clean the board and the inside is just covered in tiny hairs.
hard to find thick merino wool though
Like EVERYWHERE
Raws are sticky at the top, its a design flaw
ok
raws L
i just tried filmin does jades and they dont work🥀
i might as well through em in the trash or some
based
what u think of kailh bcps btw
rubber dome > mx > he for me outside of gaming
imo they feel the exact same as the og bcp
RUBBER DOME..... Im going to faint
not membrane rubber domes
topre rubber domes
those are premium domes that are much more consistent and have a wider tactility range
although i would prefer membrane rubber domes to certain mx builds too tbh
shit like old prebuilts with mx clears and steel plates
= fingers vaporized
@sacred elm
so good
not rly tbh i still dislike long poles
@tropic urchin get ready for superior hall effect switch made by Gateron
Gateron will save us
but if one wants bcp they are effectively a good experience
oh yeah forgot
are they not happy that it is not jade pro clone enough
im trying to get some leaks
tecsee gel pads clear the hardest though
raedssss
raeds suck
raeds on top
propagandist.
that still feel light
erm they are the exact same except gel pads have the option of stronger domes lol!!!
no really
the aeboards logo is even on them
only in us of a bro
everyone else can grab gel pads off ali for the price of chopped liver
well, most*
oh you said domestic
i thought you meant domestic power because better sales through better accessibility or something
lil mj
nuh uh all same
raeds will have stronger proper domes for sure though
Lekker raeds soon
imagine
those aftermarket domes aeboards selling later will be swappable onto gel pads too
wdym lol i am nowhere near as insufferable as that gremlin
still not sure what the purpose of those is exactly
"hmm i got bored of my venom, time to upgrade to a cipulot pcb"
he was never the same after he twinkified himself
i would like to think he was always insufferable
as in i grabbed both tecsee linears/tactiles and the linears felt the same as raeds
minute differences in housing acoustics but not enough to matter personally
nah he was chill in boardzycord
..... Good or bad idea to drop 50 bucks to kbf and get pcb stab pads and switch pads.
god i wouldnt touch that place with a 10 trillion foot pole
everyone in boardzycord is on another level of the spectrum
switch pads are a meme, stab pads i recommend
probably somewhere cheaper though
still i very much like them
true...
Silcone or foam?
if you get the properly thin ones and apply them correctly, they sound very clean and have no mush
I'll probably just amazon it like last time.
@cloud pivot you seem chill
i AM chill
can i ask you how to build my next board?
and also, if you recommend HE or should I stick with regular mech switches
for the best sound
sorry im trying to keep my inner rubber dome beast in check
Oh I've seen these. They're made of like almost a foamy rubber.
also how do you type so fast
thats what my ex said
i think the 0.3mm poron ones are great if you want to absolutely silence stab bottom out sounds
but i like these because they clean up the sound just enough
Would it make sense when the WS Stupids have a silicone dampening layer already?
@tawdry tree 3.5mm 
not on bottom out
the TPU inserts are only inside the housing and the wire clip
aka the two places where rattling/ticking occurs
because of poll, as if they go by that 😭
Oh they're not even that expensive. 7 bucks for 20.
New molds confirmed basically, so no more jade pro recolor 😃
no “new” materials, no 4mm
will they cook tho
the difference is that it will make you buy raeds/gel pads faster
or whatever grain gold will cook
quad rail would be hilarious though ngl
imagine the binding issues
you wouldn’t even be able to press them down 😭
Bigger number better
jit aint got the secret sauce 🥶🥶🥶
😭😭
I hope I fucking didn’t man
but it seems the most likely
or something like those qians
by only 10 mins too
or unionwells
yiqians have something special?
it’s gateron man 😭
not yiqians, qian or something
drunkdeer’d shit
raeshas
i just read it and what the fuck
But that doesnt improve wobble tho
and if they do, it’d be worse than quad rails for sure
that would feel horrible
it improves the magnet wobble in theory
at the expense of fucking up keyfeel
Maybe, but not physical wobble
ts aint it i fear
just separating the keycap/stem wobble from the magnet
something in their material said transferring
what else could it be
we know gateron believes dual rails actually do something
so why not 😭
more guardrails = more better
yeappppp
lol idk, now im curious what is it
there is a chance its another boring switch
they did seem to get 4mm td way before tikkens were announced though
so thats
something....
I’m betting on quad rails or something along those lines (which is worse than another boring switch)
open bottoms 😭

for gat, yeah 
watch em do some dum like 2 mini rails on both sides
oh, yeah the qians are
raesha tecsee ttc
rest of the switch is gimmicky thingamajigs though
