#🔧│keyboard_modding
1 messages · Page 686 of 1
Right, well i literally just unboxed this Module so I think I'm just unlucky.. Tech will be tech at the end of the day!
Cheater
Haha this feels like me right now - https://www.instagram.com/reel/DJHV_5Oozjs/
First time lubing my switches, once they’re lubed can I put them inside the keyboard and start typing or am i supposed to leave them out to dry before doing so? if so, how long?
Put them in the keyboard and use it
thank you
Guys
I think the Cosmo creator is making a red keycap set leaked by him today
Peak 2
just take some out ig
idek if i’m over living just asking lol
but it isn’t a serious worry if i do tho right?
nah its not like anything will break
it's pretty easy if you just overlubed the wires a bit but if you overlube the housing it's a bit of a pain
i need help lol
The open part is supposed to be facing the white square thing at the top of the switch slot right?
marked the parts in a red circle of what i’m talking about

It can be either way although for best RGB it's that way 
yea i figured cause of the clear window and that white thing whatever it was i assumed was meant for the window
just wanted to double check
btw how long does it take for custom pre-self done lube to go away? the stock was prelubed but didn’t sound as good anymore so fast
Depends, generally it should be fine for a long time but there can be a break in period where it shifts to where it will end up settling
Anyone have the first version of the tofu60 case ? Not the redux, do the pcb fit in ?
it does 
No issue with the usb entry on the case ? I remember seing something about it
It's fine as long as you screw in the side where the USB sits first
why you get ban?
Check prices on Amazon below
Monitor: https://geni.us/q1rA1p
Mousepad: https://geni.us/tFLDfBa
IEMs: https://amzn.to/3Fkyk6S
Mouse: https://geni.us/xT8IZd
It was time for a bit of a refresh.
Optimum x Wooting keyboard: https://wooting.io/project-optimum
zeromouse: https://zeromouse.co/
desk (AU): https://www.eliteofficefurniture.com.au/produ...
60he v2 spotted
Tikkens seem very tight on top
He has wooting 60v2
@cyan lark my 60% setup rn is now using WASD QE Fluxies and rest owlab ti he switches
tried POMs briefly but I really dont enjoy them as much as these 2 combos atm
After this video, optimum case is calling me nonstop ngl
im not alone?
dont lie

but i just made the venom build soo
and probably cant sell that without big loss
I know I'm probably in the wrong chat, but are there anyone here that is familiar with the diff. on Beast x and Beast x pro? Is it worth buying the pro version 
Thanks!
Sounds solid. I use my OG Poms on my 60 but I could see owls in there just as well
@gaunt plume https://item.taobao.com/item.htm?id=850909772497 UR white jade max
its quite funny sounding bc the left side of the keyboard is louder than the right side
I might need to salvage some fluxies from my F row keys from 80HE
Oh yeah for sure, you won't miss them in the F-row
@tawdry tree are phylina lightnings out for the us public or china exclusive atm
I tried typing them but they never showed up 💀
cause translations prob
they’re called phylina lightning/thunder/thunderbolt/thunderstorm
💀
thunderflash
Let just say I said some mean/weird things as a joke with my friend
ooh, gotcha
Yeah tbh idc I play Roblox like once a month at most
And it’s not my first time 🥀
thanks mr aligner 

Me once every few months
❤️
How does this mf not have single visible dust particle in his videos, is this some sony lens voodoo shit that im too poor for to understand? @glacial wind
he 100% dusts regularly
i know some video shooters like gerald undone specifically keep an air blower on hand to dust off before shooting too
he lives in a clean room
This is like my 5th ban or some
My acc should’ve been deleted alr
Bet
from Nyaberry
Drunk Deer 北斗 self-developed Beidou high-precision magnetic switch
So.. WS Flux HE mold is not proprietary to Wuque.
https://item.taobao.com/item.htm?id=931649367704
its dogwater anyways so no one rly should care
Flux recolor with a “???” magnet and a bottom housing of “???” material 🔥
the flux?
yur
the stability improvement is not noteworthy at all (not even better than current options)
and it has other issues like magnet having too much flux causing some boards to just not work, improperly demagnetized springs etc (i think drunkdeer might just address this but who knows)
ic
I think D said it was a collab project with a new mold at a new manufacturer so I wouldn't be surprised that it's not exclusive.
In my notes I somewhere I have the name of the manufacturer Im pretty sure
Price ??,?0 usd
Oh yeah, they are listed as being manufactured by K2, which is a new manufacturer and TG provided some photos of the facility on his review (my fiance had a friend in Donguan do some digging and I've got more info from him)
It’d be interesting if they were less than $2
Hello, I just bought a Wooting 60 HE+ and I'd like to customize the keycaps. Do you know if there's a special size or do you have any website references?
HOLY SHIT OPTIMUM UPLOADED
no way youtube kept this from me for 4 hours
unacceptable
Almost any profile works, but the stock profile is OEM and the most popular profile is Cherry
Use the site here and it’ll give you a few websites to look thru keycaps
It’s a fun, and sometimes expensive journey, but find a color style/scheme you like and you should find something within your budget range
I've seen good variety and had good purchasing experiences with KBDfans, Divinikey, and Swagkeys. I got some PBTfans and Keyreative brand caps and like them both. Cherry profile for both and they fit nice on my 60HE+.
why though
undercutting wuque after they did allat hyping is cool but i still dont see the point in it
against other better switches
doubt wuque did much of anything
it’d be interesting cause then it actually gets more competitive
it’s KoMs wobble and better lube
i dont get the appeal of hhkb, i use my ctrl key so much 😭
They just use caps for Ctrl
Imagine work on Windows Server with this keeb
yeah nah thats a layout for people with small hands or something
yeah wkl seems usable
maybe good for people that are hardcore gamers and cant keep their fingers on the correct keys
i have run into that problem maybe 3 times total
in all my years gaming
Yo chat, haven’t look at HE switches for a while. What’s the best switches
Oh thanks
👍
Thank you so much🙏
So cheap😮
Not sure what stabs are stock in the 60he, but I should have no issue keeping them and swapping the lekkers out with geon raw HE, no? Been told conflicting things, that they can cause issues with the Raw HEs n need to replace stabs etc etc.
The throw on raws is shorter, so you may wind up with some see-sawing on stabilized keys. If you do, geon stem spacers can help and are cheap.
Good to know, will order some in the morning, thanks. 🙂
Not just a switch web
What would a knob be used for?
Everything?
I never understood knob people
Well I’m just not sure the use case
Like volume…
U can do that on the screen
Volume up, volume down, mute. Maybe it could be used in video editing as a fast forward, rewind or pause. For the 60he probably as the esc key instead of mute for the press in.
Um racing games?
Steering with a knob would be interesting lol
Definetly
Hall effect button press on the knob for gas and brakes
@prime orbit knobs will have five actions. Press, left, right, hold and left, hold and right
Ngl analogue keyboard steering is more accurate than controller
Imagine sending him video about getting them destroyed with keyboard knob
That sounds crazy to me but I'm not going to knock it till I try it. Some to test next time I boot up forza
Try it in dirt rally 2.0 game
I don't have that, but I have the rally expansion for forza if that counts
I can do some crazy shit flatout
No, because dirt rally 2.0 is very hard game
Driving flatout is basicly Driving by few centimeters
Hmm I might have to pick it up then.
Otherwise you land on tree
💀💀💀
Rally is father of motorsport while f1 is mother remember

Rallying is nice and high in andrenaline
If you go left, you go right in rally
@wispy vine do you have vr?
I have a oculus rift or rift s I haven't used in years
You can rally in vr then

@wispy vine just do not hop into group b cars
If you are not experienced
lol I paid like 50 smthn dollars for my 80HE when it arrived
Me when I use windows instead of alt tab for games
Every time I switch tabs or windows I use windows+numbers
So at this point I really need my windows key
Wtf is that bottom housing
we no longer have just closed bottom housings, we have filled bottom housings now 🥰
why he never make a 80he test

man, they need to release 80he optimum case so he can make a vid

because he doesnt use it
I doubt
what happened
Taxes, I only slept for 4 hours, came back to the dorm, forgot to bring a towel, just had a small one. Yesterday I got soaked and hung my clothes up to dry, but they didn’t dry completely. I had to ask my mom for some money, which I’ve never done before.
sorry for your bad day, but keep ur spirit up with the Brand New Holy 80, and the lovely top mount
I’ll flip out if it’s awful.

Who can help me with my switch
Have you tried pulling it out and placing it back in or replacing it with one of the spares that came in the box?
swap the switch
yes its easiest way to fix
but i want to fix stock one
because its not cool
month of using XD
i think dirt maybe inside
then swap it out with a spare one or open it
Guys how do UR ice ultra and UR blue ice ultra differ?
Nice case
Btw, which switches do you use / plan to use?
@tawdry tree i've got My case
Im wondering whether the kom pom is better than UR ice ultra
Idk POMs is meta
I'd hope someone can compare them in chat
You can get the Phylina lightnings which are ur ice ultra with a boxstem, supposedly rivals the current boxstem meta but I haven’t seen anyone with them in the wild yet
So u mean they have less wobble?
Anything with a boxstem will have less wobble — they should be similar to POM stability, but I haven’t seen anyone with them yet.
U mean this one?
If you like the ice already might be worth trying
Yeah should be those
I think they should come out a bit cheaper than POMs currently
You could try getting 10 pc of those and POM and see which you like more
Not a bad idea
Wdym "a bit cheaper" pretty sure they're a lot cheaper
Just semantics, its what I remembered when I last checked the other day
How much per 10 pcs should they cost ~?
Idk I don’t shop on Aliexpress anymore post us tariffs
But like, in general
With jade rubies is it worth re-lubing them?
If you notice spring ping or a more plasticky sound when pressing I would (happened to my jade pros)
no
oh not right now, have an assignment I have to finish first then i can get back to the case stuff
@trail bane was your plate standoff screw kinda hard to open?
M no?
maybe skill issue from me
but some standoff silver ring on the pcb got scuffed
kinda weird
Is it proven they're the same?
was yours too or maybe i was unlucky on my second module
my old batch of 80he screws weren't that tight iirc
You can ask @tawdry tree, he has tried both
@tawdry tree Yo, is phylina lighting really better than ur ice ultra? Also, are there any other Good hall effect switches worth mentioning?
How to muffle the noise of the space bar?
I have already posted in the general discussion, but I was advised to ask here. I apologize for the double post with the same topic.
The space bar of the Wooting 80 HE has a sharp clack, loud, "different" noise, which clashes with the pleasant and silent "chock" of all the other keys: it annoys me like a sauce stain on a new shirt!
I've read many: additional lubrication of the switches, filling the space bar with sound-absorbing material, replacing the o-rings with softer silicone ones, or adding some, which makes no sense because I don't see any o-rings between the bar and the switch.
in the meantime I found a partial solution:
I filled the inside of the space bar with several strips of self-adhesive felt glued one on top of the other, shaped for the width, length and depth of the bar.
Furthermore, on the two internal sides of the short sides of the space bar I adhered two strips of the same felt of a length adequate to make the strip protrude by about 5 mm from the profile of the bar, downwards.
Nothing can be seen from above with the bar mounted.
The result is that the space bar does not hit the frame because the two strips of felt arrive in contact before the bar.
The result is good, but it is unlikely to become excellent because now the loudest noise is produced by the return of the space bar.
Another way is to glue 4 5 mm silicone buffer half-bubbles on the plate in correspondence with the corners of the space bar. But maybe you can see them from above ...
my question still stands: is there a more technical, functional and functional way to silence the space bar more?
What to do? (other than changing the keyboard? 🙂
all you needed to do was lube the stabilizer
not the switch, not foaming it, not rings anywhere, no other funny business
just lithium grease on the wire contact points and it's good
the keycap doesn't hit the plate, the sound is produced by the wire rattling around
is this chatgpt?
the answer is not really, space bars will always sound a bit different to the rest of your keys. Some people do various foam mods or install spacebar foam, some use a slightly different switch just for spacebar - it just depends and there's no perfect solution to making it sound the same as your 1u keys
but are you sure?
By "stabilizer" do you mean the bent metal wire that rotates when you press the space bar?
because it isn't on the 80HE.
There are two "suspensions" that look like switch heads that go up and down with the switches...
oh i guess he's using some sort of translation app or something
that's the stabilizer
and yes there is one in the 80he
https://youtu.be/usNx1_d0HbQ here you go
The ultimate beginner's guide to lubing stabilizers
There may be affiliate links
Stabilizers: Check out my sponsors down below!
Krytox 205g0: Check out my sponsors down below + https://kineticlabs.com/taehatypes/205-grade-0
Brushes: https://amzn.to/3rwCKeS
Syringe: https://amzn.to/34OyBJx
Flush cutters: https://amzn.to/3mXhlId
Tool I used to...
ok. so the method used - which works partially - is the only one...
Anyway, it's not my obsession, the noise of the bar is really loud, dry and annoying. I respect all the other very silent keys...
Well there’s three components here: the stabilizer, the switch, the keycap
All three can be modified
PS I had already seen that video..
Can someone tell which switches (hopefully few) are counted as the meta? Currently looking at the Phylina Lightning
I'm looking back at it now and I'm really behind on the HE switch market now.
The Thockson fell off 
Wtf is Phylina lightning 👁️👄👁️
MX has engulfed the son of Thock, now he's gone 
So theres a chance we could get ttc poms with octagon flux stem?
TTC OctaPOMs 🔥
Even UR Ice Ultra has been out for a while now (I think) I STILL DON'T KNOW WHAT IT IS
🥀
o7
heres a quick read by sno
phylina lightning are still very new so very few have tried them and they haven't really been tested much yet
I've heard the phylina lightnings are like ur ice ultra which are like owlabs ti he, am I right?
you could say that, although owlabs ti he are slightly less deep than ur ice ultra
how much do they cost?
and we don't know how good the magnet is in them either
With welcome deal they cost just 1.3 euros per 30 pcs
huh, really
Here
interesting
Imma order these switches cuz that's insane value
1 per acc
3.93 75%
Imma have to make 3 ali accs but that's fine
in before he's permanently banned from aliexpress lol
Lol ofc
Cuz mx on top duhhhhhh
Brother ugh
why does he look so tired
It’s a tiring job making up bs on the spot
Yeah it’s tiring to review 200 amazon kbs every year
They all the same foamy kb
Only diff is the format
ok but what is creamy and thocky most of all
U can be the first to answer that
and when will he be enlightened by the crunch
Lies! Don’t have Lightnings in yet.
He doesn’t like cherry scratch so prob never
You should plague his every video asking
L
Yeah. Same material housings and same mold marks (and from same manu ofc).
my new calling
Guys where can I find a guide for dissembling and modding my wooting HE?
I'm looking to put some dampening into it to make it a bit quieter and less rattly if possible?
I have bought switch lube and would like a guide on how to lube those as well if possible.
“That’s cool and all” 😭😭😭😭
dampening wise you'd mostly have to look first at what you want to do
like what rattle are you trying to remove for example
Well as much as possible, but the space-key is perhaps the biggest rattler at the moment... would it help if i recorded a clip of me typing on the keyboard?
I've seen some people that got good results modding the wotting 60HE and 80HE, but I need a sissasembly guide so i don't damage my keyboard permanently.
yeah record a clip. There's already a lot of foam and such inside your board, so if your spacebar is bothering you then you'd want to start with stabilizer tuning/modding
wooting has assembly/disassembly videos iirc
ah cool even better will check the website
for example this is for 80he https://www.youtube.com/watch?v=AnyG_a1kosg
Sometimes, you may need to fully disassemble your keyboard, whether it's to swap out stabilizers or replace components due to a defect. In this video, we'll guide you through the process.
🛒 Wooting 80HE https://wooting.io/wooting-80he
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
In...
Also sorry i have the Wooting Two HE*
This tutorial will guide you how to swap the PCB on the Wooting Two HE.
Did your PCB break, and you don't have a replacement? Contact us at social@wooting.io
➤ Follow our socials!
🧑🤝🧑 Discord https://wooting.io/discord
🐤 Twitter https://www.twitter.com/wootingkb
📸 Instagram https://www.instagram.com/wootingkb
🎥 Twitch ...
I think this will do.
What's that?
who is young😭
Khm hm, ahem agem Ret*** choice
For he it’s not the worst
I was expecting worse
Don’t take this personally
I’m already taking it personally and it’s not even my sound test 😡
pc plate?
Yep
sounds really interesting
u got alu by any chance?
No i’m to broke for this currently
I would like to humbly apologize for the words that I have previously said
Maybe soon
Trade a few snake Poms 😌
Jk he sounds like poo crap mx on top
Unfortunately, I can’t, as I promised someone, I passed them on to someone else who needed them more. I’m only keep few for collection and some for unforeseen situations + the ones currently installed in the Wooting.
Thanks for the free ronin keycaps btw
They look real nice
Order for some switches and keyboard stuff 
Pics or it didn’t happen
Unfortunately I don’t have any boards to put em in
Ima just let em rot in my drawer
WDYM "some" THAT's like a whole car
Are u poor shaming me for using a iphone 4 camera
not even 15 pro max
Apple doesn’t even extend iOS support for iPhone 4’s 
If anyone is poor shaming you it’s Apple
No they are not
They are greatest phone company
They are def not brainwashing ppl
They just get free social marketing
is this not just what @deft jolt and @microplastics were working n
I actually took that photo with my iphone cam on pixel mode
you'll need a google phone now, you've exceeded your daily Pixel limit
Nuh uh
So uhh, when will the recolored fluxies be available for order, asking for a friend
Lol
Went from pom to flux to pom, them fluxies do be feeling a teeny tiny bit nicer
Dont tell anyone i said this tho
I tried POM again after using fluxies/owlabs and I took them off after like 1-2 hrs lmao
Nothing wrong with saying that. Feel is their strength after all
They have lots of weaknesses with everything else but feel wise I don’t think anyone is going to say they’re bad
i hate to break it to you
go on
they've behaved decently on benom so far, has surprised me a bit since other ppl had issues
they feel bad (i never had them)
i see i see
i'm confused why you need a second set though
i believe u
?
https://youtu.be/As_QdU7nAfg ugly as shit or kinda nice?
🔥This fire is out of control. 🔥
First
@tawdry tree got my ow60
oh, ugly as shit
the cut off corners look somewhat offputting
for me 3
Are we cutting both pads and mix them??)
ye, it’s a bit of both for me. kinda nice, kinda ugly as shit
the rest has some insane spacebar sounds
60he v2 but 80he
try. u can always put em back later
This ones ass, the one with the trippy gold spiral backplate is kinda nice, but aint looking at the blackplate after assembly
Does someone have Cam’s pic of how did he cut the silicone pad?
how did u sneak a cam into my check up with my doc
I hope it will be better than just poron/silicon
I am all knowing
Gideon 
nuh uh
still a wip
It seems fine... But more stiff than expected
Is it supposed To be like that?
I have no clue what you mean
nevr seen it before?
The different modes work well?
Gut
reminds me of when I was tryna entertain half plate HE
actually]
it might be more viable now with how tight he legs are
older HE switches relied on plate fit for position stability
(which is why the rawhe SUCKED to take out)
Well they seem to stick while tilted but they move 1mm after clicking
did you reply to the wrong message or something?
at least not freely
that’s good
But it is more stiff
Is it supossed to be like that?
oh wait is that just ur list of what you've tried
In unbuild case
I thought that was a public list or something
depends how you mean more stiff
Very hard to make it move and less hard but still hard to push
it’s my order
not something public
or a list
doesn’t sound good either
🥴
in stiff mode surely?
Both mods, or maybe it is my disabled hands unable to push enough

board looks ehhh
in the bounce mode it shouldn’t be that stiff
I like how it looks from the top. Everything else is ehh
Both were in bounce mode but I assume the more bouncy side is how it’s supposed to be
from vids as well
yeah
Well definetly my board is balanced
front lip is funny
And no tape
Good
maybe mine was already repaired or something
it had an issue and they added that
🤷♂️
😭
Well with builded keyboard it should bounce
But for that we will have to wait until q4
you don’t feel any difference between modes at all?
There is little bit more bounce in one of them
you don’t have a board that fits now?
I gave my 60he to Sister
Because i got 80he obviously
But for now I have to stop with keyboards
Because mother found out about 400€ piece of metal
I showed her

ngl I'll be pretty confused why my son spending $400 for something that slightly bounce.
Look my first custom was like 450€
@tawdry tree case had 2yr warranty right?
Have you considered a super luxurious leather shoulder bag to carry your owlabs case around
Why not a $400 bag to go with the $400 keyboard https://www.wotancraft.tw/en/product/bpt05-v2-blackL
Well i think my room is most expensive in flat

Not joking
An artisan tray that works as a stream deck would be insane
so a macro pad?
but u put artisans only
artisan tray that works like stream deck > macro pad with only artisans 😭
how old are you bro
not dumb, many people like it
I’ve seen it before
Well it will be less if we wont include medical stuff

man
But still like 6000-7000 €
thats like
In hotwheels and pc stuff
a camera and a lens
Can anyone recommend where i can buy quality keycaps like these
oh u have hotwheels?
It’d be a good camera and lens though
and in just keyboard stuff?
Yes i do collect
That sort of money he could get a real nice camera and good gm prime
those look to be of the absolute worst quality I’ve seen 😭
maybe search for type writer like keycaps?
Keyboards, hotwheels, xlr mic setup, monitor, pc
https://www.youtube.com/watch?v=mYvI9oGJhm8
Looks better in white and gold tbh
🎮 MK60 Vortex Gold | The Ultimate Magnetic Switch Keyboard
Experience zero latency, liquid-smooth keystrokes with the MK60 Vortex Gold

plagerism
I feel like the case kinda doesn’t match with itself, like the parts of it
With copper or gold awekeys
bro 💀
Talking about my package hotwheels
I might have rare hotwheels that i've played with
But they will need re paint
Like I have ferrari thats from 1969 mold
what case is this?
rose 75 iirc
And it was from Polish hotwheels shell promotion
4k 💀
sexy
search pink van
💀💀💀💀
the fake holes on the top plate ain’t for me
ceras would look good tho
you don’t have the alphas or just didn’t put em on yet?
Yes
I’m broke ass
Yea, just for check them out

😭😭
Man buys shorts to try them before buying the full trousers 🤣

you could mix em with the full white too
might look good as well
or full light blue if they have that
Ig, but tbh i’ll get some cool abs/pbt caps
don’t like ceras?
Top row- snk POMs
Bottom row- OG POMs
And it’s not a problem of it being the edge of the keyboard, they sound like that everywhere.
Bathroom test
@tawdry tree my rlc maclaren f1 is alone like 400€
pro tip: instead of buying that $400 case - buy Glove80, even just to try it out, you can easily resell it after locally if you want (has pretty high demand, avoiding tax).
this is just the best ergo-ortho whatever kb on the market, you should just try it once in your life, it's just a much nicer and much more painless experience than using the standard layout. not for competitive gaming though (and overall).
I just feel like people focus too much on the standard layout, and not trying to improve even that almost at all, and just pretend it's some kind of amazing thing - those just haven't tried ergo-ortho-concave kbs. it's also just fun experience learning something new like this.
??
I’d test it with left snake Pom and right normal POM since different rows will sound different even as simple as 1 row down
we are good
but thanks
current "standard keyboard" situation is just not great at all, and hasn't ofc been great ever. and no one is even trying to improve it - everyone just still makes the same not great to use standard layouts - e.g. never changing bottom row in a way that actually makes best and ergonomic sense, for typing, office and gaming.
i'm just very disappointed in this state of things.
Curved monitors clear
yeah, but it's easier to sell laptop with ANSI/ISO rather than what ever you suggesting.
Speaking of curved monitors shot could use one
🌹
Unless Microsoft and Apple suddenly want people to have better typing ergo, it wont happen.
Hopefully I can save up.
Like I’m said before no differences
Kinda itching for the new Asus' Oled tho
not everyone needs an ergo kb my man
you just posted the best ergo kb on the market.
thats why ppl still make standard layout
The Alienware curved one would be a nice option since cheaper, and not an obnoxious curve
Since the panels should be standardly the same
I want flat
Im typing this as I look at one half of monitor because the right side contain nothing
you think you want flat, but concave is actually what you want after trying it
I play rhythm game, majority arcade rhythm game monitor uses flat.
Here’s another fun fact about the Holy80 I don’t know if it’s the same for others, but mine smells strongly of honey-based watercolor paints

Shafie doesn’t have the money for that. He’s busy saving for new lenses
you know you can use multiple kbs interchangeably right. yeah, maybe it's not best for this very niche use - so you change to another kb when you do that activity.
for rythm game you also need low latency, this isn't it ofc.
Can’t be buying ortho concave keyboards when he has a new Sony gm lens he needs
are u the glove80 salesman or some
I dont type homerow, I rather use that money on a monitor since that helps me more compared to an ergo keyboard.
i'm saying you should try it, and you will almost certainly like it - but even if you don't you can easily sell it for a high price still. you just don't really lose in this scenario at all.
I live in a 3rd world country...
i dont think many ppl in massachusetts want a $350+ kb
also i dont need to try if i dont have any issues with normal kb layouts
but also with time, you will get pain in fingers when using standard, so this kb fixes that. (also better to switch to it before you get pain as well)
I bought it for 20€ tho @tawdry tree
👂 why not
Home to one of the biggest tech hubs in the country!
Nobody wants a $350+ keyboard that looks like a mangled corpse
Honestly I have no context for what KB y'all are talking about, I just get defensive about the USPS and Massachusetts 🙂
Mangled corpse, jeez. What board?
@cyan lark this board
I’d rather develop arthritis than look at this board
I thought we left that weird edge shit with the Samsung edge phones but I guess not
I’m glad u like my state
Not glad that u like usps
Oh u live in ma too? That’s a mistake
Well this was my spawn point
looks great though
but here it's white on black - ofc not gonna look as good
Even discord doesn’t want to look at it
That looks better than the kb
It’s doing u a favor
like every single reviewer always comes back to Glove80, just always saying it's better than whatever else they tried, it's just that good overall (especially now with better switches).
Picked up some thunderflash for sound testing
Yoooooooooooo
Bro is him
Ah so like a split Kinesis. I tried a Kinesis a long while back and it seemed like too much to figure out.
Thats a steal
Indeed. @sacred elm you better get on these mango deals
@sweet oak
WTF
Yeah but how is it going to look when it gets stuck at customs or the customs officer takes a bite to ‘check’
Does look like a nice mango tho
Reminds me of the Korean trend for awhile where they made cakes out of every fruit
I’d buy a mango cake in fairness
That sounds bomb
Korean BBQ + mango cake who says no
peach cream cakes 
Drakon is onto something too
Mango cake was pretty amazing. I bought one during the trend

It’s literally just made of mangos cake and cream
I guess I need to move to Korea
lies and deceit
Maybe not after Johnny Somali tho
where are the strawberries
...strawberry?
Oh don’t worry they do strawberry too

thats an ungodly amt of fruits
Expected that to say mango to be honest
Holy fuck
they do not play
bro
insane
They’re like $35 each because it’s an ungodly amount of mangos in each cake
Worf
stop it 😭
soo expensive
tbf, my country can grow it ourself
so I can prop get it for half the price
I will pay twice this if you bring me some

Fuck I’d go for just the mango cakes
the diplomat
149,925 + mango cake for 60hev2 early I see
And some BBQ
Banable offense 
I think mango is my favorite fruit

ngl same
Mango is in my top 3 fr
but i cant eat much cos of my health
Pain
I’d actually rather die omg
Costco has great mango deals
People who are allergic to shelfish are also allergic to crickets
We don’t take lightly to your kind, ‘round here boi.
Post has been fact checked by the world economic forum ✅
Give me mangos or give me death.
Two things in life are certain.
Mangos and crunchmaxing
You cant have me
But you can have my patented MangoHE technology to crunch
In switch form
No no no
You could make your own switchy cakes out of mango
Missed opportunity
THEN you bring it to mark for 60HE V2
I dont involve myself in cannibalism
That’s unfortunate then
We have to convince hipyo of the crunch technique
Only way he can be redeemed as an mx man
He can’t get out of gold in CS, you aren’t convincing him of anything
Full. Stop.
But what if we add the same foam from the keyboards he always makes videos on
Wait what
https://oilprice.com/Metals/Commodities/Nickel-Buyers-On-Edge-As-Another-LME-Scandal-Unfolds.html
Throwback
Holy shit that's real LOL
Yea, they're allergic to chitin which is the same structure in both
This is the reason why insect proteins never really caught on as a fortifier; it all has to be labeled as shellfish allergies
This guy only knows baitmaxxing
cant wait for him to flame the woot knob and 60hev2
@mod I’m done
Why did I get a ping?

I apologize mods I will bow down to all of u
who ping me
I'm ok with people who want to disagree with him or don't like his content, but I also want to make sure we don't make it personal or cross a line (not saying you are, just a reminder).
I deadass didn’t mean to
F1-65 anyone
Okay, I’ll stop harassing Mr phish 
There better not be
Can't beat a box on wedge 
we'll see, he's the ultimate test. If wooting can please him without paying him, then it's a mark of a good keyboard... Unless he still flame, which just makes his hate personal.
Comparing me to hipyo is the meanest thing someone has said to me this week
And ik it’s only Monday
Idk for the mx glaze I had to
I'm not sure you're ever going to find a the value proposition of a Wooting keyboard if you don't find HE a useful feature 
Hippyo is entitled to his opinion, even if it's wrong. He may not be concerned with things like community, warranty, support and innovation, which makes his only focus on budget and Wooting isn't the cheapest HE board and they will never participate in a race to the bottom. Despite that, Hippyo is responsible (whether you think it's good or bad) for introducing more people to the keyboard hobby than any other streamer.
Don’t compare my mx glaze to his
What about thocksons mx glaze phase
He’s still in it
I don’t like him for delaying my 80HE, but I was mainly just memeing phish
It's a lot harder to make a case that doesn't ping than one that does
I doubt he'll ever glaze wooting
Until a paycheck comes his way he won't ever glaze wooting
That's quite the accusation
I'll give you $15
I got 3
been a rough year for PC gamers
i started lookin at gmk sets yesterday 💀
AMD and Nvidia both suck lately
It's a trap! Everytime I say Im done I buy another one...
I just muted every server, no notifications for sales or anything
🙂
Out of sight, out of mind
Speaking of keycaps I saw that novelkeys did a sneaky thing and The Key Machine release that launched today was a limited edition keyboard and not keycaps this time https://thekeymachine.com/products/004
Damn that's nice
Level 8 of Star Wars Jedi Knight II: Jedi Outcast titled, "Nar Shaddaa Streets". Played on the "Jedi Knight" difficulty with 100% secrets.
After reclaiming his lightsaber and Force powers, Kyle learns from Luke that Desann may have a connection to a garbage hauler named Reelo Baruk who resides on Nar Shaddaa. However, it appears that there may ...
“Varedis says I don’t need an AMD GPU”
💯
Reminds me how good GMK Sloth looks on cream boards

4090 and chill
Never thought I’d feel good about buying a 4090 white strix but here we are
I kind of want a 5080 FE and full send a SFF build
I wouldn't mind an SFF these days
I was thinking about building one myself
Yeah the extra desk space would be nice
and there's something about SFF that's just minimalist and clean
Mhmm
speaking of gmk what gmk sets u guys think will match well with this case color
But then I was looking at that thermaltake case that's precisely the opposite of minimalist and clean
maybe GMK Olivia
depends how pink that is in person
One of their new ones?
Looks like a fancy rice cooker 
Ah yeah I seen this, pretty neat but definitely not SFF lol
Almost like a mini fridge PC
But it's so pretty 🥺
Haha yeah I don't mind it
You getting a Lila?
maybe
im waiting for other reviewers
and that low front height is addicting
Yeah it's pretty nice, not the biggest fan of my regional vendor and it's region locked so probably a pass from me
thankfully keyspensory is based in us so hopefully i shouldnt have to pay tariffs
Yo has anyone else had issues with the wooting 60 plate not fitting over stabs? Ive tried durocks and owlab stabs and both are like slightly too large to fit through the plate (both the stock plate and an aftermarket one).
Are you putting the stab in the correct way? Shouldnt be any issues. Picture for reference may help
Yes I am putting them in the correct way. I can get a picture in a bit but I have built a few other customs (not wooting) and never had an issue. The stab housing is just like unable to fit through the plate for some reason
sorry 60he or 60he+ ?
60HE+
Showing this on the aftermarket plate because Im not taking apart the build right now but same thing happens on the stock wooting plate.
First is a owlab stab housing, second is a durrock v2 housing (sorta did a bad job lining this up)
I tried on both plates having the stabs actually mounted to the pcb (correctly) to no avail
Sorry if I did a bad job recording that
But yea same thing happens with the stock wooting plate, the stab housing are just like slightly too large and Im not sure if Im going crazy or what lol
Video isn't playing on PC or Mobile for me but from what I can tell is you're using plates with cutouts for plate mounted stabs which have smaller cutouts than PCB mount cutout plates and the stabilizers you're using are likely too thick for those plates.
Yeah M2 Grater (although no front IO is kind of cringe) or C4 V2
Yeah, too wide stab housings in a too tight plate.
I want reference or flip layout with 280mm aio compatibility
No riser cables for me
I see that but I was wondering if anyone else had encountered that issue? None of my other builds have ever had stabs (I have used both durocks and owlstabs in other builds) that cant fit a plate I was using.
Yeah, it happens quite a bit.
The wooting 60he comes with screw in stabs though and these are also screw ins. I have the same issue with the stock plate
Ah ok
Woot’s stock plate (steel) and CF are stiff, so there’s no leniency and you can’t really force the stab housings through.
Also, a 161MB WEBP is criminal brother
💀
Oh mb I just left my regular recording settings on. Some ppl cant really load it when the files are that big tho srys
WEBP’s don’t work on anything Apple iirc
I think discord made it a webp cuz I uploaded an mp4
Hmm, shouldn't have issues with stock plate and stock screw ins
Discord griefing 😭
but you could have issues if using stock plate and 3rd party stabs cause the 3rd party stabs could be thicker
Issues with the stock plate and 3rd party screw ins.
Yeah
I might just try and file them down or smthn 😭

Im sure that could only be good for them
Yeah some people have tried filing the plate cutouts down
You can get plates with PCB mount holes as well
a lot less work
Where would you recommend getting a plate from?
the plastic plates you can cut (and that’s still a fucking pain), wouldn’t recommend doing anything for CF or steel
@thorn zealot you were right grasshopper, UPS is cooked
AliExpress has some iirc
Tom aka Hypekeyboards or AliExpress if you can
atp usps > ups
If I order a 60he plate from Hypekeyboards, do you know if it will fit larger stabs like I have? Or how might I be able to confirm that before ordering one?
You can put in a comment on the order to have PCB Mount Cutouts for the plate instead of Plate Mount Cutouts
Just tell him its for the 60HE+ and the stab holes will be bigger by default
Yeah, Tom will know
hey guys,
are the new 80he batch doesn't have the stabs pad? or is it from the first batch?
Alright, I also went ahead and sent a question to thier support just to confirm with them before ordering but I will make sure to do that. Tyvm
Yeah no problem
UPS Worldwide express 🥀
Iirc they should all have it
Not sure on this one myself
mine doesn't 
What batch were you
Interesting
Tear it down to PCB
Personally, I wasn't a fan of the pads anyway but I don't remember hearing anything about them being removed
You won’t see it from that view
Nvm I’m fake news
lol
Could maybe contact support but yeah, I'm not sure on that one, sorry
and the standoff ring for the plate on the pcb got scuffed as well because of the tight screws
the little plastic rings?
if you just mean the metal contacts for the screws, that's fine
as long as it didn't scuff the actual PCB and expose any traces, etc
Yes
alright, thanks
Yeah, no problem
the 60v2 will also have the get to know your wooting sticker righ?
I would assume so
Yes, but it will be painters tape and not the PET sticker
yea ive heard problesm with the 80he one leading to it haaving to be removed
what kind of problems?
I think you might be confusing the stabilizer pads with the PET film? I've never heard of the latter causing any issues.
am i tweaking?
Maybe?
i think u are
i think pet sheet won't make a huge problem like ixpe sheet for the pcb tho
Oh yeah that would be a different beast as well. Other side of the PCBA.
@stray tiger can you post/DM your fluxies plate foam setup for your benom good sir
I just have foam between the PCB and plate. Thats it
Ah okay
I might need something cut to venom 60%
FR4 sounds weird on venom but maybe it’s just no silicone
i am doing a jeffy rn on alexotos stream
the kb hes buildin is mighty fine
I’m going on a walk, send me some clips 
I might go for the dreaded PP plate
ur goin on a walk at 9pm
Damn straight
i would but i live in the forest and it is spooky and scary out there
I live in a yuppie neighborhood but I did this shit in Tampa
he hasnt even soldered yet, u might just be able to come back in time
That depending yeah can be kinda weird
If you’re like NH in the forest
Homie hard core
this is the board hes buildin
Ooo
i have a essay and presentation due tmr and im watchin alexotos solder 🔥
do i need to take the keyboard apart to lube the stabilizers or could i just use a syringe to inject the grease
u can just use a syringe to inject lube
no need to dissemble
ty
Bears/coyotes 😰
Keep an eye out for the Aurora
I saw something once or twice last year
It was like dark green/red marbling in the sky was kinda cool
I live too close to civilization for bears
Lucky/sorry
Nice, I missed it so I’m staying up and waiting for pitch black
i live too close to mango's brethrens
I recommend to go out 10-1am on those nights
That’s what I did roughly
Western mass farmer spotted
farmer livin in the woods 🥀
i think they makin sure i dont snatch tuans gmk
I figured you were prob more central/closer to NH border
🚫
Good you’re far away from my GMK sets
good ur far away from my (maybe future) gmk sets
That’s hot
I mean you’ve seen my tastes
he gon build a even hotter one later this week imo
There’s a reason joshibasan left the discord
And it’s probably bc of my busy boards
this list is like a rough draft
im tryna match with the rose lila
God I wish there were more cool novelty sets like lazurite
I’d sell my pinky toe for some shit like that
dude im gooning vigorously rn
there u go
Is this whole Discord in Western MA?




