#🔧│keyboard_modding
1 messages · Page 565 of 1
it's great, you just have to bring in new people to our ||ponzi scheme||
It’s wild the POM springs make the Jade pro springs feel like L60s
I still remember trying it for the first time and I was floored
It felt exactly like the 42.5-45gs
Not even close 😭
Yeah they seem nice
I’m going to keep them. But include the raw and BK with the Wooting
I remember how I got those springs before they were sold on international and lubed them, and didnt even know they were pingless
I think he has the best short springs and TTC have the best long springs
Great. Now I have both. In lightest weight too. Good to hear. 
What springs, aside from default, would be good to fit in the duhuks
I’m using 22mm ones I got off amazon, but I think they may be too long, idk
I assume the most correct answer would be the raw ping less huh
In case anyone is interested, one of the documentary’s review is out now
“Age of Disclosure”
Scroll to the bottom
🖖🛸
should i go dry as well/
save time
was thinking of just lubing the ends just incase
didn't want to make a whole mess with bag lubing
mines should come by this wed
wouldnt lubing ends be more time consuming than bag lubing?
but yeah they are kinda supposed to be good without lube
Yeah lubing pingless a waste of time imo
Truth
Geon be really hating full size 
hii! are raw hes worth buying direct from wooting atm?
They only have 50g listed, but if you wanted 40/60g, you could always spring swap with geon pingless springs
okok sounds good! i dont know much about actuation force so i probably wont be very picky about that lol. thank you!
what about the jade pros? any recs on where to get them
For most things 50g will be fine, I like 42.5-45g for FPS games but will be personal preference 🙂
Can always experiment since pingless springs are very cheap
Gateron.com, Amazon or Aliexpress
ig
was wondering anyways cus im on my spring break
taking my break to heal up
so i got nothing to do
ooh gotcha :) what switches do you use now for fps then?
I’ve really enjoyed the OG POMs (45g bottom out springs but also long spring so they hella snappy) I had Jade pros before
Would not recommend if you’re on a budget since they’re on the expensive side
And also very clacky if you’re a thock enjoyer
yepyep guilty lol
every new person here is uniquely a thock enjoyer
If you pair a clacky switch with a softer plate then you could get some thock to it grace

Would be my recommendation
whats considered a softer plate, if u dont mind me asking lol🥲
RAWs will have better stem wobble than Jade pros, but you could get a PC/POM or even PP plate for your keeb
Gives you more info too 🙂
ah okay!! i was planning on getting a mod kit with a pom plate! 😊
I’d also recommend tape mod for you too
Not a bad idea 👀
i was considering the jade pros, but was concerned the tint might affect the rgb too much 🥲
okok
If you pair it with a lighter plate it’s not terrible, but for RGB enjoyers def RAWs
on what aspects do the jade pros do better than the RAWs?
I liked their sound a bit more than RAWs, but their spring is longer so it has a faster rebound. Also is very easy to remove
But if you’re spending Jade pro $ I’d just get Wooting POMs
And use a 4 layer tape mod 
okay!! ill def keep that in mind thank youu so much 
objectively more stable, subjectively sounds better
If you’re US based you can get the OG POMs from Milktooth if you’re interested in the lighter springs
im in canada but will have a look! 😊
ooo gotcha
Ahh why can’t it be Thursday
You make yourself
Then you make yourself
Translated to go fuck yourself
Geon gained a lot of aura after I saw that screenshot
That's how you gotta talk to people
I rememeber seeing messages like "Full size is not a real keyboard" from Geon
True
LMAO
Geon, the Miyazaki of keyboards
I feel low key bad
Imagine being a full size enjoyer and getting fucking bodied like that
Sheesh
well I hope these 2 people are not upset
lmao
He not wrong
I wonder what layout he uses on his venom
Imagine it’s full sized
But he has the 1 of 1
it's 99% so no one calls him out
He'd call it, "Not A Keyboard" Keyboard
How would they know unless they’re spying on him with like Pegasus 2
he streams quite often
hasnt stood up ever since he started keeb hobby
This one
100% is goated (as long as ur not gaming on it)
That’s actually super funny
Damn nice
TTC POM & VENOM to the MOON
real
Tbh venom he + lekkers is best way to experience geon keyboard
i really wanna try the ttc poms but they’re so expensive bruh
Anyone know any good 75% diy kits or pcb n plate combos??
Yknow what
optimum case + VENOM60HE + Tape mod + Any switch and a typeplus Stab is better
Typing experience e z
But make sure your tape mod isnt 3 layers atleast 2
Tape mod killed me
see this persons hould add more tape mod and suffocate their pcb
and i hope it burns
Huh, didn't know JPros were more stable than RAWs, in person the RAWs felt more stable to me
and based on those numbers, Duhuks are basically the same as Jade Pros
Is 40 bucks for 70x Jade pros worth it?
better than $60-70
erm actually! 70x RAW's are 33.6 
if you dont count shipping ofc 
You meant from Ali?
89$ cad for me 
L
so emmm... my smoke detector has been beeping for 3-4 hours with the warning "low battery"
is it on ali?
my mental is definitely stable rn
ermm actually! my body is telling me to go to sleep it's almost 1 am but im eating grapes while watching anime
totally mentally stable
I had Geon Raws and they were great
I moved to ttc pom but for the price range and factory lube, they served me well even though mine were hand lubed
same here
i just mixed myself a cup of drink because i was only able to sleep for 2 hours even with my headphones on. maintainance people all went home when the problem occurred. hehe...
i switched to duhuks
pain
you tried ttc yet?
nah
and im good
unless someone wants to send some out to me to try 
other than that
too broke
need to sabe moni
for leggera
I can send you like 2 lol
and neo 65
DM me if interested, I got the 90 and have a few spare
but they are OG
when shipping costs more than 2 switch

probably won't be too expensive though, small dimension + weight
I’d get them but they’re pricey+ way too clacky
I guess I’ll get them instead
im still with raws but yh for a price like that compared to how much jade pros are usually are
then it's not bad
If those are for magnetic switches then you can use them just fine in Duhuks if you want to.
definitely made by hejin
yea i didnt even realise raws were curved
Nice coffee color
Exact same mold marks and diffuser Duhuk has
Full tan switch would go hard
We now have Everglide Master, Latenpow Deng God Pro and OWlab Ti HE, all recolors right?

More Duhuk style switches please, fully opaque housings
Or POMs too
Might have to take back what I said about Gateron’s board, this is kinda cool. Manual calibration too.
For bath time gaming
🥰
For all the people who drink by their keyboards
Now you can keep drinking and keep gaming
Latenpow Deng God Pro and Owlab Ti HE have less stem wobble than Everglide Master.
I think the molds are different.
Interesting!
Maybe the stem? Duhuks stem is a little wider than that of the Raw HEs, maybe it’s something similar. 🤷♂️
Yeah, if you notice tho, it has the same circle (nipple) on the bottom housing and same diffuser as Duhuks
Oh, I’m stupid. @gaunt plume it’s because of the bottom housing. Duhuks’ bottom housing is that of the Raw HEs but without the hole. That’s what causes less wobble, it’s slightly tighter. So switches like the Deng Gods and Neo Lavenders for example have the old Hejin closed-bottom bottom housing but the Duhuks, Deng God Pro and Ti HE have a closed off Raw HE bottom housing. 😂
😵💫😵💫
Yeah, I’m fairly certain the bottom housing is that of the Duhuks, same with the diffuser indeed.
Maybe without the infused fiber though. 🤷♂️
Yeah, I doubt the exact same materials but same mold marks
Dimensionally at least. Hejin box stems don’t fit in Duhuks’ bottom housing, same with Raws’ but they do fit Everglide Masters’ iirc.
They fit, but so much friction that the spring can’t push them back up again.
So yeah, definitely tighter bottom housing then like you mentioned
I didn’t bother trying my RAWs or Deng Gods in the Duhuks
Someone has 3D Print for wooting 80HE dust cover?
Thank you so much
They removed the item for 80% layout 😦
you can message the seller
I will try
FBB sells one for the 80he but only on Taobao
Not bad
https://www.youtube.com/watch?v=9sgeYh3nIxk The button that I want is finally released
【追記】
多くの視聴ありがとうございます
色々な方に観ていただいてありがたいですが、あくまでも購入を検討されてる方は参考程度にご覧ください。
今回の動画撮影に同一のマイク、同一の設定(ノイズキャンセル等していません)で収録しましたし、
静音ボタンがより静音になるような加工は全くしていませんが、マイクの性能等で破裂音が大きく聞こえるとか静音ボタンがより小さく聞こえるかもしれませんので…
動画を自分で見直して「大げさに小さく聞こえる?」と不安になりました。
もちろん元のボタンより大幅に静音化には成功しているし個人的に買ってよかったと思っています。
他にも同様の静音ボタンの打鍵動画もあるかと思いますのでそちらも参考にしてください。
購入した方に騙された!と言われるのが怖くなって追記しました...
for japan for now
Waterproof keeb before upgraded switch tolerances is crazy work
Seems like you need a 10th board 😏
Lateron
1 billion scan rate
negative latency
10 overpriced recolor switch options ✅
Centerpiece clears
Post some keyboard latency/stability tests ❌
Post that the pcb is waterproof ✅
it's nice if you wanna play game on the pool
or a tub
At that point you’re playing the switch or steam deck cuz who’s gonna have their whole rig there 💀
I have a question for the 80he I want custom key caps but every keyboard i have had had shine through keycaps how is the visability of non shine through keycaps in te dark with minemal lighting
you can set the rgb intensity lighting yourself so it can be super bright in the dark/minemal lighting if you want, or have it dimmed to fit the overall vibe
Even without shine through keycaps wil the letters en icons be visable enough? (When set to high brightness)
unless you sit in a complete dark room, I would say so yes
I have my rgb pretty dimmed and I can see everything just fine
(no shine through keycaps)
Oh alright thank you

You can also pair your keeb with a white plate and try to stay away from switches that might darken your RGB experience (with GMK and darker switches it isn’t been bad for me at 70%)
Yeah wanted to buy gmk caps to so yea thank you that was my only worry
This is about the light I get capping it at 70% with not great RGB switched and alu plate
Bro loves to flex this masterpiece
Don’t blame him

It’s soon to evolve on Thursday hehe
lol how so
white zinc ⚰️
Don’t tell mark or maybe he’ll see anyway 😅
I’m getting mine before Cam, so the silvery church is starting
Congrats 
Pom
I ordered last month so idk how it’s already ready but W KBDFans
Bro what
pom bro
Don’t make POM enjoyers look bad by going straight tysm in the chat
what’s there not to understand?
POM
pompomPommer
Just POM, nothing else matters except pom👀
pompom
ahem duhuk clears 🤓
There we go, we have some equilibrium
that nigiri esc key XD
Lord Nigiri
It’s an opal keycap and matched the build so I had to I blame thockfather
And RAMAworks for scamming their artisan lazurite collab
wow that was annoying as hell, how do you people replace all of your switches every other day
regardless I guess the keyboard got cleaned and I have the mathews now
You skipped the first step, which is to find an appropriate k drama for your keyboard tuning time
I was listening to music but it was still quite annoying
The only music should be the excellent Korean ballad playing as the main character wins the affection of his childhood friend
also I don't understand korean so I'd need to be reading subs and then I can't look at what I'm doing

An acceptable loss to experience a truly great story of redemption and growth
How do you like them and did you lube them?
nah lubing is the worst, I plopped them in as is
I'd say they achieve the thing I bought them for which is being quiet
anyone who's scared of wobble shouldn't really be looking into these I guess
I sleep until someone makes a better silent switch I guess
your spacebar switch looks weird
yea im not using pom spacebar lmao
Jade on the spacebar? why?
spacebar is too loud with pom
I see, my pom switches arrived yesterday other than that I only have lekkersv1 and lekkersv2, I will test it with pom otherwise I will use a lekkerv2 instead, thanks shf
I mean pom is fine, but its a bit too loud for me (on spacebar) , also I like light spring on spacebar and woot pom is pretty heavy
What about gaming on the pom switches, better than lekkers?
Yeah I like them way more, lekkers are my least favorite switches because of how wobbly they are, also 4mm travel is meh for me
I will try to change them at night 😃
are you lubing your poms? because stock poms are very plasticky sounding
Not yet, I will do it in small batches, as I have the 60HE and bought the 70 switches bottle
You should try frankenswitch on space bar(jade stem and lekker v2 top/bottom housing)
I tried it, was fine with regular jade bottom but with jade pro bottom there is friction
because its tighter
where is alu plate for pcb mount stab
i dont have regular jades anymore
80he
https://x.com/freewheeler_/status/1899470251135582532 QcK finally good 
RT @SteelSeries: precision made personal 🎯🏆
the QcK Performance line drops today with 3 new surfaces: Speed, Balance and Control
availabl…
Ali
damn, cs pros will swap their pads after 5 years, because new qck dropped POG
💀
Wait I’ll found link
i dont think there is alu plate available for 80he on ali, only torontokeyboardsman has it
it has next to no resistance 😱😱😱
Can you SS? Twitter still down
never mind, everything is out of stock 💀
😭
oh thats new 😳
price?
thats for plate mount stabs
I know
it’s a vid
Mmm, noice
@ripe tulip you can try messaging torontokeyboardsman for alu plate
And? Same shi tbh
I don't think it's compatible with my stab
Wooting 80HE Keyboard Plate with standoffs PC POM FR4 CF Brass( for plate-mounted type stabs)
https://a.aliexpress.com/_EzgeJZK
thanks
Also here is a Poron Sound Package Sandwich Cotton Bottom Cotton Positioning Plate if you need
https://a.aliexpress.com/_EQ2g2G8
yo will this cable be compatible with tachyon mode https://a.co/d/6KOyTkZ
The same complication you cen get from torontokeyboards man
only way to know is to try
the problem is with tachyon mode + max LED brightness
I found POMs cleared my Jade pros within 5 seconds of use
I didn’t wanna believe it at first, but it quickly killed the pros for me
It’s not a fun time, but if you do it enough you get fast at it
Having a nice puller helps too
Probably still shit 🔥
eh, maybe
They’d never..
hope I don't have to do that for a while again
Link doesn’t load Classic
Surely they won't all feel like mud or sandpaper 
Surely
They have to be able to do something right at least?
so if i use this cable i just cant use tachyon with 70% brightness
if it wasn’t compatible
it's not so black and white obviously but that's the gist of it
more you push it more problems you may have
They’re Steelseries, of course! 🙈
At least it seems they continue the trend of soldering stuff in their products, this time the fabrics to the pad, stay classy steelseries (its stitched)
Aligner, do you know if raws are compatible with mchose keyboards?
Hmm
Maybe
Depends on which mchose are we talking about, lul
jet75 is ks20
So raws are compatible😳
yes but the kailh gods they come with are already slightly more stable than raws
ah ok
what about other switch? starburst
noone tested those to my knowledge, but they're expected to perform at around og jades
It’s near maximum clack without any ping since it’s not metal
pc clears 🫦 💋

Wtf is that emoji 😭
🫦 💋
lol no
PC doesn’t clear shit but steel IMO
PC lame af, respectfully
Yeah ik, I hated pc because I had weird doubletaps before, today I reassembled and everything is fine now. Thinking that my 80he wasnt properly assembled before lol
It was stock
He’s a d1 wooting shill
Heard that the solid side beast x pros are gonna start shipping the 15th
It really will be a birthday miracle
with poms pc sounds fine imo
Lemme know hows it, maybe I made a mistake ordering with side slits
but I like it
my grip is locked in
Aye if its locked in and feels good, thats all that matters 
Clicks are extra snappy 
Yeah beastx clicks clear my viper v3 clicks easilly
I went the opticals so they’re gonna be speedy speedy
razer opticals 👎
My fabulous beasts collab has the mech nihils
It’s fine. I just don’t like it lol
Wish they were bspd
Man with new case my clicks feel SO MUCH better
It feels “so heavy” now tho
And the grip isn’t as comfortable NGL. But everything is so much more solid. Especially the clicks.
Razer opticals be both quiet and mushy its a bleh and bleh click
Edible too
I dont think theyre quiet at all, my left click feels a bit scratchy on viper
They’re pretty quiet.
beastx is smooth
Maybe something wrong?
It do be having web software
Yeah just move on lol
Razer keeps slackin on that
Yeah I just learned that the other day. Hella clutch.
My mouse has no software.
So glad many of the new stuff from mice manufacturers have web base
You just hold mouse buttons down in a particular way and the cursor jumps around to tell you what’s going on lol
What mouse did you get
Drone mouse go brr 
Won’t catch me lacking with wireless
Fabulous beast reference ?
Oh ye i just saw they announced that, true fingertip shape, dongle is extra cute
Nah just mini mini
I WISH
Need more of that stuff
💀
What fingertip mouse you going with, are you going oval or square
Found this on twitter, I literally cant use these mice at all because of the grip
Oh god
Key pro store also gave me some free mx switches
Godspeed, warrior.
gg
Have fun losing an eye 
Dont worry everyone i have a tx puller
Plus, my plate is already fucked from me pulling all my lekkers

i just blue myself
~ PURCHASE LINKS ~
- Hangout.Audio: https://hangout.audio/products/truthear-x-crinacle-zero-blue-2
- DONG BUNDLE: https://hangout.audio/products/b2d-bundle
- Shenzhenaudio: https://shenzhenaudio.com/products/truthear-x-crinacle-zeroblue2-dual-dynamic-drivers-in-ear-headphone
- Amazon: https://geni.us/BLUE2
- AliExpress: https...
Hmmmmm
Idk what i‘ll do with these tbh
Might upgrade to these from my zero reds..
More comfortable than headphones for me
But i‘m happy with over ear for home and airpods for commute (where sound quality doesnt matter anyway)
Usually my ears are quite sensitive to ear buds but my zero reds are really comfortable
I use mine for both
Feel is very different per set and also ear tip, but nice having a combo depending on what you’re feeling for the day
Using my iems for work kinda busted my cable up tho ngl😭
I need a open back set to complete my audiophile setup
I had sennheisers hd599, loved them coming from gaming headphones
Actually unusable
But these iems, the sound is just different
21 kilos?? How do you even move it around
Yeah I have the 490pro. So fking nice
They don’t call me Bigsly for nothing
Nothing I've used compares to iems in terms of fps audio

They are genuinely op for this 😭
I spoiled myself on the deep end
My brothers dt990s don't have shit on my iems for in game sound
I dont play competitive fps anyway so 
I feel blind using dt990s/my hd599 compared to zero reds
I‘d much rather be comforable and have good audio for my music
Yeah 490 Pro’s are just too good
The best part is they sound great for music too
Incredible comfort, music and game sound
But the comfort thing is obviously preference i get that
Yeah but i dont like the feeling of shoving a piece of silicone straight into my brain
Idk if I'll ever go back to over ears
Good over ears are super nice
I think I've been fully converted
I‘m a open back enjoyer nowadays
Yeah but I can't imagine good iems 👀
Shit would be heavenly
I used to think open backs are stupid and then i tried one
I do miss open backs...
But the benefits outweigh the cons for me
Yeah i simply dont need that level of portability
They are just too good for comp fps, while rivaling my hd599s for music still
Its in that exact in between area where it doesnt make sense for me
Honestly portability isn't even a concern to me
I play too much comp fps to wanna throw away my audio wall hacks for open backs
Yeah thats fair
I was pleasantly surprised how comfortable they were considering I'm super prone to migraines
I used to play games like that but now its just stuff like path of exile, warframe, monster hunter, some fun little sim in between all that
I think there‘s an archetype i fit pretty well 
I wanna eventually get a nice set of iems
But those zero blue 2..
Might have to go with those
I mean why not
Idk what the cost is but if crin calls it budget it cant be more than 500 dollars 
Jade pro every time
jade pro
But i would like to also suggest geon raw he, duhuk core he and ttc kom pom
Is it like a big difference between the lekker and jade? Done some research and believe most prefer the jade yeah
I’m still chasing the Xenns Top sound profile even tho I upgraded to Fiio FA19s 😅
Yeah i think I'm gonna pickup those blue 2's
Idk any of what this means
I'm an audio noob
I thought iems were just regular ear buds until last year 
Smaller nozzle on this one so it might be even more comfortable

Trevel time 4mm vs 3.8mm
Wobbling
Spring 45g(l45) jade idk
I love this pic that they used for this keycap lol
how is it in terms of sound? Lekker V2 vs Jade pro
big or small depends on how much you care
. lekker v2 has a big hole at the bottom so it would be more quiet compare to switches that don't have the hole(jade pro, duhuk, pom, raws). jade pro is relatively on the deeper sounding side but still a clacky switch, it has a long spring which means more snappy and slightly louder upstroke.
Hand lubed l45, stock stabs, stock foam + tape mode
Did anyone get a purple beast x pro?
Dream
Squadmate calls it pimp purple
He wants to get one but is unsure of the color
Checking if anyone had some actual pics
tf is that
Spooderman unicorn
Little smirk
Looks like b x max
Ty 🙏
Wow they did that color well
Like a 2 fast 2 furious lancer evo
WRX STI > EVO
I'll die on that hill
because the suspension went out while jumping
Love it how they started out stealing vhs players
Then somewhere along the way the cars started doing backflips
Fastest I've ever travelled in a car was in a souped-up STI, hell of an experience
Huh, it really is Pimp Purple
Is there any real difference between the Jade Pros and the Geon RAW HE?
anything that makes the pricier Jades worth it
In terms of feel and sound, and how is the factory lubing comparing the two?
This just tipped the scale and he just got one, thanks again 
They’re earbuds with extra steps - Xenns and Fiio are Chinese manufacturers, the main hub for IEMs are on linsoul which is in China
There’s just a metric fuck ton of them depending on your budget
for anyone who might want some kind of idea of the Mathews
stock in my stock ABS 80HE
I need a keycap set in these colors
I’d buy GMK Pimp purple easily
Factory lube is good on both, Jade Pros are more stable
Sound and feel is basically the same
Yeah stability and springs really
Probably going for the Geons then, or is there another brand that's better in the same category as the two
jade pro is more stable at the bottom specifically, which helps for some pcb, not wooting at least not right now.
TTC POMs and Duhuks
Would you say those two are better?
Duhuks are on par to Jade Pro stability and TTC POMs are the current best
and both produce different sounds compared to RAWs or Jade Pros
Duhuks have good factory lube, TTC needs hand lube job
I love the title change lander 🤣
Anyone know of a good comparison video of those switches?
I have sound test videos but not necessarily a comparison video
Wooting has a comparison video on their channel
alright
It’ll probably come down to how much you want to spend since POMs are on the expensive side
Yeah POMs are the most expensive out of the 4 options
with Jade Pros being 2nd most expensive
and then Duhuks and RAWs
"expensive side"
But I think if you’re already eyeing Jade pros I’d go for POMs
On Ali express you can buy it with up to 40% discount
It is on the expensive side
most expensive yet needs hand lubing
If you ordered it from new account
Unless you have issue with semantical phrasing
Yeah my only thing about recommending POMs to new guys is the fact that most new people either don't wanna lube or don't have any and it's extra cost and/or time
jade pro is on the expensive side imo :3
Adds to the expense of the POMs
Collab POMs😵
Yeah it’s fair, they’re fairly hard core but I’ve also lubed all my other shit anyway so
5 dollars per switch
Worth
hmm, I'd prefer not to do any lubing
but if price isn't an issue, would the Jade Pros be better than the Geon Raw he, and comparing Duhuks against geon which is better?
i still dont understand how 60+ is not expensive for people between 16-25. especially comparing against things you can get at 30 (duhuk), 40(raw), and 50(jade pro).
Duhuks are better than RAWs in the stability sense, but sound is subjective
so Jade Pros or Duhuks would be your best options for stability if you don't want to lube
Yea
Some kids have rich parents I guess. Become the rich parent.
@glossy pagoda youll like this video
I think I’ll be able to resell them for a higher price, but otherwise, it’s a really stupid purchase if they’re exactly the same as the regular ones.
CNY enjoyer
supposedly they are not, but can be just marketing
Actual switch investments 😆
Yea
Here's a stability chart
I’d probably even buy an exclusive board from Melgeek if I were rich (I’m not).
Honestly surprised Jade pro come out that close to KoM
Yeah I was too tbh
performance wise the stability not gonna impact wooting at all because they simply don't let you to set the distance so low.
They feel tight but not that tight to me
just a matter of typing experience.
Felt like the duhuks were tighter but the duhuks get the same results
that’s 4 pcs
Yeah
It just feels better to type on more stable switches imo
Oh thank goodness, I thought it was a full set purchase
and you get a cleaner sound from more stable switches
i feel the same, maybe the top housing of duhuk is better
not the stem coming back up hitting every side of the universe and rattling
My duhuks are waiting at the post office, should be able to pick them up Friday. Looking forward to checking em out.

Full snake
hope you like them
RawV2 is about the gist of them still right?
Duhuk definitely not for everyone, some won't like the top out
OwO
4k pcs 😵💀
Yeah basically but different sound and feel
Haimu Silent MATHEW sound test
so just a different switch and not v2
Ha fair enough
but fully closed bottom
Sounds like a calculator
all i can hear is scratch, i cant hear keybort
How is the Geon RAW he when it comes to factory lubing?
My batch was good
good, spring needs some work but that is mainly for nerds like me :3
I saw a couple say they didn't get good batches but I think for most it was fine
and yeah lube the springs
especially if you're sensitive to spring ping or crunch
yeah I think you connoisseurs would hate these ngl
they wobble maybe about as much as lekker v2s and they are quite scratchy
but they are in fact, quite silent
Literally nothing left 😭
me no connoisseur, me yapping dumb ass. but yee they quiet
I don't really mind the scratch, but then again I don't mind most things, just sound bothers me
maybe lubing would help but I won't spend 6 hours doing that again
I'm gonna trust that someone takes the good parts about raws or the ttcs and adds haimu silent tech onto them
got a link to it? kinda want to see how they made it quiet
i typed Mathews switches i found this bow
Haimus have little plastic bendy bits at the bottom and top that do the dampening instead of rubber bits
When did you order again
first seen in the heartbeats and whispers from the metal-contact world
I'll pop one open I guess
Feb. 11th
wait right i forgot about it
this thing
We ordered on the same day lmao
yeah exactly
I no longer feel bad 
what the fck is that
2 pads on the elbow
LMAO
Droppin Elbows
POMs impact wooting
Pom
Surely that's worth 130$
130?
Just for me to remain ass
Canadian****
oh POMs are $130 for you?
Yep..
Yeah not worth
For 70💀
Deadzone ain't that serious
Not even 90
Aliexpress first order discount🤫
Only works for specific things does it not
I tried to see how much raws would be with that and couldn't use any discount
Never used ali before in my life
i remember mentioning this and chat said i got scammed by propaganda.
so i am lost
Yesterday, I ordered 30 pieces with a 40% discount. If you buy in larger quantities, the discount is slightly lower, but still there.
@quasi hinge 💀
Can confirm seen his message
Yeah that's back in October of 24'
so cam which gt80 color did you buy
The best one
Silver prob
nah its gotta be pine green then
Nah lol
(Is there even a silver gt80)
Silver
I KNEW IT
We drop ‘bows on ‘em
Bro knew
varedis is receiving gt80 in like 2 days 😳
He said the best one it had to be silver knowing cam 
It's telling you something big going to happen
zombie!
(hopefully I'm wrong)
Noh, something else
No
The government...
hello baldson 
still no leggera for bald boi
@harsh dove bless you, this puller made my life so easy

I didnt destroy my switches or my fingers this time

Duhuks going in now
there's varying opinions on this tool, but I personally love it and it saves a lot of stress on my already damaged hands
TX puller is the greatest thing ever made
Yeah the TX or Wuque are my personal faves
Haven't tried something like this yet
coming in next week for me hehe
Wait fuck i forgot i need to spring swap these still
😭
There has been a delay in the installation of duhuk
how would you describe the feel and sound of the top out, i can't seem to put words to it, i do like it since it's pretty unique tho
yea its just a push-and-pluck mechanism
mj said he broke his in one day i think xD
the keycap remover on the other side is... OK. kinda fragile but idc since the regular ones work just fine
wtf lol they must've been rough with it, mine's gone through a lot
whoa never seen this
it's not that the puller I used was the issue, just that I found the activity itself like washing dishes
or at least this one
Hmm, basically a soft somewhat muted top out, almost makes it weird to type on at first
Yeah I kind of want it
I have a switch removing phobia NGL
the gateron switch opener is pretty goated
okay, in my home row, it kind of has this weird sound quality... think of the sound of that a wobbly metal sheet makes when you wiggle it back and forth
it has SOME of that... sometimes
idfk how to describe it
agree
yea this gets the stubborn swtiches out pretty easily
sometimes you do have to rock it back and forth
million times easier than using the tweezer style ones tho
nuke it, pls and ty.
nuke that as well while you’re at it.
switch cracker is good, yeah
whats wrong with this one
hahaha u might be using it wrong if it's cracking your switches @tawdry tree
works fine for me, no visible damage on my switches
maybe the one u had was faulty or something
it’s just slow and doesn’t work as well as their other puller.
it cracks switches alright, but it’s meant to. it’s a switch cracker!
killer thighs
oh wait i was thinking you were talking about the switch puller cracking the switches lol
yea the switch cracker is nice, just don't put a vice grip on it
haha, nah I just like to call it that lol
needless to say, use controlled strength when using that switch opener lol
I think turing pushed the stem through the bottom housing of the TTC with that puller
😭

Found em
I was legit looking for em for over 10 minutes
And i complain and find em right away
lesson learned: complain more
that is how it works
ok i have to see how y'all are using these goddamn tools lmfao
Wtf
that has to be a freak accident.... or you're just like... not using it right... which isn't hard to do.... lmfao
don't mess with Turing
Crack open not crack/split lol
Beo had it out for those switches 😭
🐧
haha yea i misread it originally
it’s not a bad thing per se, he made it into an open bottom essentially creating a mod accidentally lol
goddamn LOL
i thought that was done intentionally
LMAO
tf
LOL
Open bottom poms with this one simple trick
https://www.aliexpress.com/item/3256808207944609.html
Does anyone already know how much they differ from pom? Judging by the slides, they have an improved magnet
they differ in price 😂
@gaunt plume did you already do an old KoM vs new KoM test?
one person already ordered pom and zodiacs. maybe he will do a test
Imoshi has all of them already but I don’t remember if he already tested them.
@harsh dove Thanks for the tips earlier! Went with the GEON, hopefully the batch is good :)
may they be extremely anticlimactic for those who order them while having normal poms🙏
those who buy the limited edition ones will feel supreme over all other pom enjoyers
as they should.
🥰
Pom pom
how are poms compared to mx switches?
Superficially, they differ in material, which is obvious from the name of the first ones. The first ones are more expensive (any POMs in general). Speaking of wobble, there is much less of it in POMs since they have a box stem instead of a regular MX stem. POM on POM glides better, which positively affects smoothness.
I would say more, but later, after I try them myself.
Any tips for first time lubing switches? I have the wooting lube kit and ttc wooting poms
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
Lube stem walls, springs and bottom housing
Here’s a video for reference. From here, just do as you see fit. You can always start from the beginning.
If you mess it up, I’ll sue you
It is done
All spring swapped
Took my time with it cause i‘m in a call with friends
what did you use before?
gotcha
What springs
lookin very cheddary 
Needs black plate
looks like 90 fried eggs for breakfast
yeah i cant unsee egg yolk from those stems lmao
u said that u alr know what the next meta for switches is
should i wait for those or get duhuks now
If you're not tryna spend money on multiple switches just wait but if you really want duhuks then get them
@calm pulsar the silver CF plate is from keyboard fun store so its already gonna be a fire plate wonder how it'll do RGB wise with new GT case
can u tell us any info on them rn
or no
No
said to wait so they must be good 
ig the plate reflects light better
it cant be as muddy as the default CF plate
Those the pingless?
yeah that's how the packaging looks on em
I lowkey did think they said pingless on the bag tho. But I just checked and nevermind lol
keep em in case you don't like the duhfuks
impossible 
Probably pull the raw stem out and swap it in to Duhuk for improved top out?
Naw idk
iirc someone did it and it made them wobble more
but not sure
Ah grossness
but I would do that tbh if it didnt change the wobble
Guess you’re just cursed with Duhuks
cause I hated the topout on dahuks
So far i think i like em but i barely used em by now
I mean they’re nice switches lol
MX sect 
And i‘m not super biggest switch guy so i will defer to the experts (random discord users)
POMegranate
tf you calling my title out for
well people are quick to spend their (or parents') money and change their server names to whatever is the hype switch
leave the Pomegranates alone smh
Exactly, that's why I'm just "The Switch Maxxer" cause I'm Maxxing all switches
based (added to watch list)
I don't buy switches, I take them
Thief in the Night
Taking switches out of peoples keyboards while they sleep
I hope you swap em out tho
I was wondering who stole my poms and replaced them with outemu blue HEs
more homeless lore 
I think i like my switches on the heavier side
I had 50g raws in here before
But i‘m really liking the 60g pingless springs rn
what are ur first impressions so far
my impressions from this short time and not playing anything etc?
so far i like it tbh
It has a quiet top out so you may or may not like that
Magnetic PCB Support: Wooting 60HE, Venom 60HE, M61 Lite+ PCBs, and more.
Page link: https://kbdfans.com/products/gt-60-case

i am interested in that one tbh
Not a fan of that wood accent piece
KBD need to chill with all these accent pieces
i think you can go for a brass piece instead
Neat case
lx60 copper edition
yeah i dont like how it's just sticks out
Hey guys, decided to go for an easy first time build and either purchase the Type plus x Yibk or the Knights v2 (not the long poles version) + geon spacers for my 80he
Any recommendation of one over the other?
hairless prings pog
ok buddy 
Ngl id still bag lube the pingless springs just because lol
Yo this is not abt my keyboard but what mousepad yall think would fit my desk im thinkin abt getting a artisan



