#š§ākeyboard_modding
1 messages Ā· Page 555 of 1
Iāve had enough of this earlier
true, and that's for good imo
Yeah sorry I was pretty busy so I didn't get to play. It seemed too chaotic anyway.
this was easier when it was WoW and i could just color code by phase release
Iām jealous u werenāt part of that convo
Real answer: is it really necessary to color code at all? I'd think just a table w/ textual attributes you can filter by would be most useful
Gotta make it look good and appealing
is it a coincidence that he gets called homeless the moment he switches back to POMs?!
𤷠just gimme the db š
no that's called jelly haters
š
Especially for newcomers looking for creamy switches
hrm maybe i just color code the few switches that are not compatible
Ahh I apologized for the creamy, should not have resurrected it
Hmm good point
Yeah we no longer use creamy, they are now referred to as "Liquid Taps"
I do not like this
You weren't at the council to vote
This was voted on?!
Yeah you missed it
alternatively the council also accepts liquid maxxing
No. Nuh uh.

We no longer say creamy, thock, or clacky
They are now referred to as Taps
Deep Taps
Bright Taps
Wet taps?
liquid taps dont sound viscous enuf lmao
Nah, it's like discovering new land, we found a new way
Hmm, you're right.. we shall change it to Glaze Taps
Creamy now = Glaze Taps
I confirm bright taps
Bright Taps is a good one
Idk personally I like edge taps
As does Mark
Clacky taps it is
No no
So what you're adopting audiophile lingo?
Keep up with regulation
No
Veiled Taps
crunchy taps
Boomy Taps
V-shaped Taps
i need to experience some boomy tap keeb
You know what yall will never have though
nuclear taps
Drunk Homeless Taps
drunken technique
I was gonna say chill but close enough
the mr cam specialty. 
1 of 1
mythical pull
Is that a franken between Drunk stems and Homeless housing?

Cardboard switch š
I gotta head out for a while, hope the council doesn't make more wild changes while I'm gone, though I fear the worst.
need thoss
Tell me da way
i wish there was a good thocky HE switch\
the clack is a nice refresh but thock is still king IMO
Sorry sir but we donāt use the word āthockā anymore
Itās called deep taps
fjell sounds like an aluminum can imo
just not pleasant
i like the tofu
Raedssssssssssss
lol how does tofu sound better than Fjell??
i personally think the tofu sounds better than any other case
i would honestly put fjell at the bottom
it just sounds like a can
surely this guy has tried āany other caseā right?
lmao let him have his own taste
own taste is fine. had to have tried some before you can judge though.
I have tried the alumaze and a few others
but just from the tests fjell sucks
imo
I havenāt tried Fjell
Fjell with weight sounds more like a can than Tofu with/without?
Tofu clears alumaze imo
that was fast for the ttc's
In terms of sound, for sure.
that was like a few days
after trying alternative mounting cases, tray mounting ones like tofu or fjell are kinda meh now

but friction moung is still nice in them
clack maxxing on freebird
My scuffed ass medical tape mod does the trick well enough

Raeds clear comrade 
Bright taps
thocky raeds clear
You gave us parcel number
I see you joined right side
What are good replacement stabs for the Two HE
no need for 2 he tbh
just a side grade
So Iām trying to put a POM plate in
And the screws wonāt fit now?
Had a pc plate before so kind of confused what happened
Just looked
Went from wooting pc plate
Which has standoffs
Bag has standoffs for the Pom plate tho
Oh you didn't have the standoffs installed?
I know, I'm talking about the POM plate, you were saying the screws didn't fit
based on what you said I thought you were saying you didn't install the standoffs on the POM
like as if you were trying to install the plate without the standoffs installed and forgot so to speak
Thatās exactly what happened š
Ah okay lmao
Yep
you might need another screwdriver to help tighten them cause sometimes you cant get them tight enough like that
Just don't overtighten and strip the threads
Kk
me when i do not care
I need it replaced that's why I'm asking š
yeah just line up the holes on the PCB and remove the middle one and the 2nd one down on the left side above caps lock
and remove the one above H/J
You when i return package to sender
Oh wait Iām dumb I do have 2 more
Do I need them in?
Nah they usually give you extras
Kk
i dont thjink you can do that with just that info
Coming from someoneās whoās it happened to
Def can with that info
š
Looking clean

Can we mod these things to allow for actual usable home row hold-taps?
Iām willing to bypass the GUI configurator if necessary
yo i was wondering do they sell aftermarket plates
i was thinking i wanted something a little more stiff than the pc plate that came with my he+ module
there are
i went full pink on mine lol
It supports it?
Static at least
all black gang
yeah i know, i just have it off anyway
Cosmos are arriving the same day I leave for a week š š
To the individual that told me to get an fr4 plate please let me give u a big kiss on the cheek
Specs
Raw he 40g
Wooting 60he
Aluminum case
Fr4 plate
3 layer tape
Brass inside
u got a mousepad under ur keybaord??
mine are shiny 
Have u ever heard that vaping is BAD
yeah and a mousepad over my mousepad
i come from cigs so idc lol
yo idk if this is right place to ask but if i ordered Optimum keyboard does it come together or i have to put it together?
you have to build it
what mousepad?
i use a pulsar superglide xl and the deskpad is an old razer strider from 2022
do i need any tools? ive never modded before
a screwdriver
bet thanks
ah ok
wanna buy my 004 LMAO
i havent used it
for like 2w months now
glass is fun
but for val
not it LMAO
fair
rivals was fun for the little i played
but people suck
and i hated it
22k damage to lose is not fun lol
i was a big cod player but now it just sucks
i just play minecraft most of the time
fair
games are just so boring now if im being honest
nah fr
i liked strinova for a couple of days
got hella boring
only reason i play val is im addicted
was hyped for bo6 when it came out and now its just a bad game
played xdefiant when it came out and it was fun until they shut it down
now the next game i want to play is gta6 but i doubt we'll get it on pc before 2027 lol
2035
š
you and me both brother
What else were you put on this Earth for?
Slick those puppers up
https://a.aliexpress.com/_m0NROPN has anyon tried this case ?
My fault
This is my destiny
Damnit, I don't got a spare board
Be very very light with the lube
what are those
Spread the stock lube?
Yeah
22mm 62g
long spring and still 60+g
strength maxxing
you could dip them into the oil bottle at this point
That's a fair number of drips, but at least they'll definitely be oily boys
Godspeed, soldier 
What oil do you use for bag lubing springs
Woot in the Tofu60 2.0 š„š„
https://x.com/freewheeler_/status/1897110885149344023
Highly doubt it works well
despite Tofu 2.0 does have a space in the bottom case for left usb-c port
the space there is not big enough i think. before i removed my left usb-c port on my venom, the port sometimes scrath against the bottom case when the pcb is shifted in a certain way. PCB moves a tiny bit because bowl mount doesn't really tie the plate down to anything.
š¤š¤
there is scratch mark on my bottom case already from the left usb-c port rubbing against it
does venomās usb port stick out more than wootās?
and it is hella annoying when you play games that need to hold down a key.
idk
its scratching the side
I wouldnāt think so but itād be odd to go with a design like this and it doesnāt work
š¬
fck i really dont wanna open up my tofu and show you. bowl mount is a bitch to reinstall

np haha
Bowl mount? Is bro making ramen in his keyboard
it may work better with gasket or top mount though
should be fine..
its basically rubbing against this side for me
oh, so KBD just sucks
likely

cool, now let them make a conversion to tsangan layout
the great strength of HE is simultaneous multi-layout support but I doubt weāll ever see it from Woot.
Stuck with a 150+ year old layout..

imagine sticking with wooting
Why 150+
Shut up geon he sinner
no 7u
no split anything
cos sensors

man i wish wooting will just do 7u
and force gamers to use it lmao
Well you can drill into pcb and try make 7u your self
venom tkl is able to do both
Because in tkl 7u looks good
just swap in software I guess
cause on venom 7u you can do split backspace or not, and I can just select it in the software
so it disables the middle sensor for backspace I would assume
1878, arguable if it counts or not.
Thats just qwerty typing machine
Still. Something like 64% breaks that kinda as it wouldnāt be possible on a typewriter.
Need that Dvorak layout
damn the 1000 key
the šÆ key
how does shift work in a typing machine 0.0
Capslock in modern keyboard
shifts the keys probably, just a wild guess

Thatās that post prohibition keyboard layout, suits you 
You calling me drunk n homeless
Iām not saying you are, but thatās the word on the street
drunc
The hammer for each key had an embossed legend on the top and bottom. Shift would cause the top half to strike instead of the bottom.
Yeah basically works the same way
Someone needs to update Mikey on the new language rules
Deep and Liquid Taps out of box
Can we replace liquid with wet as a personal favor
Nvm I did the replacement in my head
I don't like the sound of Deep and Wet Taps
I like edge taps
funnier than it should be
Iām not laughing
speedX always do their delivery at crazy hours
I think the first 24 hour is AM while the other 24 hour is PM
wait...
BRAIN! WORK! AHHHH!
One day is 48 hours
Why do you think you have to wait for 24 more hour
ah right right right
yeah, I completely forgot that.
nah 0500
nope 5am, i was up all night working
then i got a call 5:30 or something the driver telling me he delivered the stuff
šš
bro living in the year 4050
ima just lube without taking it apart, i dont have the patience capacity
I wouldnāt for Duhuks. Just keep them stock.
Right abt this
Using my Geon brush only
The dab of lube on each parts of the switch is literally enough to coat the whole thing
no I didnt
how do they taste when lubed
new rakka https://streamable.com/ucwe67
Watch "å Øč½ļ¼éē§ļ¼ēč å½ę„ćRAKKA80EDGEé¦åčÆęµćē£č½“åå¹»ē„ä¹äøļ¼ęåæäøēē½ęå -(1080p30)" on Streamable.
i remember its not too expensive either
200 something?
grey jade pro, vid says possibly new mold
1499 rmb
L mount
only con is rakka is known for their nonexistant support even in their QQ group
such an elegant layout, TKL
I mean why not just grab existing venom tkl
it's pretty new
true, i still remember that tiger lite deal
and is being updated like all venoms iirc
I rather have an LED bar than a lit up logo. š„“
both fugly
Doesnāt look like a new mold.
IM FINISH

so much noticeably heavier
Yeah but canāt have none, obviously. Need some form of RGB!
gonn have to break in the duhuks now
but holeh these springs are niceeeeeeeeeeeeeeeeeeeeee
snnappyyyy
13 yo taste
the ali spring?
yeah
interesting
mhm
bag lubed them
so i dont gotta worry much about the spring ping shit
but
damn 22mm 62g feels a bit heavier than 15mm 60g
it's hella noticeable for me
i am patiently waiting on geon pingless 20mm, i am not going back to +- 5 bs
ok maybe worry a lil
i can kinda hear it
i think the force required at the top is higher compare to shorter spring
yeah
ok they are definetely aliexpress quality

join me, geon pingless on divinikey, 5 dolla for 110 and 5 dolla for shipping 
but 20mm :(
I actually just ordered some of those to try out
true :3 does feel a bit sluggish compare to jade pro
curious what you would think
ok this is so depressing LOL
the consistent feel is really good for me personally
As long as they not crunchy or pingy, I'll like them
ali spring moment
it's so noticeable with the top out of the switch being quiet


hence snappy
lemme cope
Snappy Taps
snappy tappy wappy
flappy
ughhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
$11.5 for some fuggin springs
well this is what i get for getting $1 springs

shouldve ordered it instead of ali springs smh
you can try to spend 100 to get free shipping
it was only $1 š
i believe that is what mr cam does hehe
$ ?
i am NOT bro
- 1 hour of your life and cost of lube
but we dont talk about that
well atleast the duhukies are lubed
afaik you dont even need to lube pingless springs
probably should, i never tried unlubed pingless though
from what i heard there is still some amount of ping
honestly for the people that got pingless geon springs
they lube them anyways š
i dont think any of them tested it stock
lul
Yeah Ima lube mine, however he does list in the description that they are pingless with or without lube
I got them mainly for the very good variance, pingless thing is sus
black jade springs š

š
Nah F those springs
LMAO
damnittttttttttttt
am BEGGING for some long springs without having to buy new switches š
time to bother geon dc mods and ask them when they gonna make 20mm spring
buy jade pros and swap springs


I can send you my jade pro at a cheap price if my duhuk is good
maybe like 20 dolla for 60 + you pay for the shipping
see... i just need the springs... i dont even want the switch 
too bad i dont want to have a bunch of dead switches, if i ever feel like replacing jade pro spring i let you know. I just feel jade pro a bit boring so not worth my time
just a decent close bottom switch
holy im not us and im so done with the orange man
what is he doing with my keyborb prices
geon pingless in duhuks, duhuks in jade pro, i buy jade pro springs 
and my us stocks
@kind helm IF by chance, if you were to sell me the springs only, you thin you can "cheat" the system by puting it in a envolope and just mail out to save money


or is that not possible and im just being a dumbass 

you can iirc
i have no clue actually. i was just thinking dropping by at ups near my supermarket if you want them :3
well ima going to cope
if this makes us less of a superpower so that their politics affect the world less in the future
so be it lmao
ttc poms changed my life
Indeed! Because TTC POMs bring you closer to god
Where yall buying keycaps from š„²
I buy my GMK from Omnitypes
Here's this as well for vendors in your region
I moded my wooting but when I press the M key its outputs MMM and other key letters. What could that be?
Did you do any foam/film mods on the switches?
Maybe too much lube?
If you have a spare switch, try swapping it
cool thank you for the idea
But is it normal if you press on the key hard, another key gets triggered?
Only if you set it up that way in wootility using DKS
As far as I know
Whats a good place to buy custom keycaps like this for jade pro switches
Here
and Etsy?
duhuks arrived
duhfuk
nvm it was my MX silent tactiles, not thefuks yet
Hi, wanted to know if you guys also help when it comes to pc builds, since you guys know tech
Oh ok
how have those keycaps held up for you? like them so far?
Does anyone know if the everglide stick rice v2 switches work with the 60he?
they do but most people here would reccomend other switches
i have them though, they arent bad but i think their prelube process is a bit inconsistent so hand lubing will probably be a must
they sound good after hand lubing though so i would recommend although i havent tried more popular options
Itās funny how tiny a container you can fit 20 switches into
I got around to opening the mathew switches Iāve had sitting around, didnāt realize all 20 fit into such a tiny little box
what size standoffs do i need for a custom plate?
the ones that came w mine dont fit the wooting
for a tape mod I want to use a weak masking tape, right? and the layers depend on my preference?
Thatās right. Painters tape is recommended.
How you mean?
mhm okay thank you, and I put the tape on the bottom of the pcb right
Yeah and depending on how many layers you use, you might have to cut holes for the screws to go through.
ooh good point, thanks a lot!
switches are tiny!
Widdle baby tappers
Another 3rd party 80HE case out there, Taka80
Which one of you internet sleuths can find me a link for it?
Anyone know good replacement stabs for the Two HE
no news on the 80 GB, they closed the 60 tho
we got tak case before gta 6
If tak case, why no frog on it
well it looks fine but ofc there should be their stupid logo near the led bar
Hope they make one in pine green without logo
The black one lopls nice
Logo grill clears 
The space is begging to be used
I even put something there on my keeb šø
Second led bar!!!!!
How would it be connected
Led on plate
If we're going custom case might as well go for plate too
Mreow
But like how would it interface with the pcb?
Squeak
Idk
My duhuks shipped
there's also the holy 80 in the works, some folks here have seen the early designs for it
Now we wait
standoffs are so big bro
They look fine?
If their length is 3.5mm, you should be good.
They donāt seem to be that big to cause issues.
i tried pushing it in w all my force tho, will try again ltr
Push what in?
š¬
i mean like
putting the pcb and the plate together
idk how to word it right
light on the wallet
All that cost and they didnt even change the color of the caseā¦
They could have done a cerakote to match the keycaps in some way
60he+ better
wth
I got ya dw
Why buy that when you can buy 80he with metal keycaps and weeb artisans
Wth is a tgr
never heard of it
why would I want metal keycaps
Because higher price tag better
and i dont want quality
i want an ego over spending $1000 on possibly one of the worst ways possible
wheres yo tokyo ghoul artisan escape
man they are so ill fitting š
you can let someone move into these gaps
crusty ass keycaps
Why not make full titanium set
Propably 10000 usd for it
hello guys, im having responsive problems with my ESC key when im on tachyon mode/rapid
i see backspace tooo
they dont work at all
when i go back to typing mode they work, anyone else with same problem?
Do you have the stock cable?
I have the stock cable and a wooting premium cable
It does register on wootility when pressed but not on windows:
+++++++++++++
All that cost and not even a custom/third party case or any mods
All the cost is just the keycaps 
and no ttc poms 
Actual clickbait luxury
creamy thocky
A few more days of agony to endure but you know salvation will come. Thatāll get you through. š
That should not require any pressure at all man. Align, the screw in is all you should have to do.
I wonder if that was intentional
or he just realized the mistake
š¤·
I mean it has the same molds
I wish I got rgbs tbh, not to deal with diffusers
pom hits different
basically the same thing i didnāt actually know they had different names
i didnāt pay much attention when ordering
Windows is fully spazzing out?
Restart PC šš
I did, still same
š¬š¬š¬
When I go back to normal mode it does register
Yeah, thatās why I thought itād be windows.
Perhaps bug?
or do you have something like a macro bound to it?
Nope, nothing
Rather odd, try changing around the RT settings. See if thatās it.
me when windows breaks because you looked at it wrong

Might be a bug, but maybe a good idea to create a new vanilla profile first
The only thing I dont like is the usb connector on the case is a bit towards one side
sudo rm -rf / --no-preserve-root
I will open and try to sit it centeredā¦
If its not that still have to do it for peace of mind
me when the linux go bye bye from one command
Huh? Itās on your 80HE no?
Yep
I did not see it while assembling it, but checked just in case
And I didnt notice cause my gf stole it for work this last two days xD
If I had to bet on something I would say its a bug, since it is registering on wootility, that tells me switches are fine and cable should be too cause they are getting enough power
Latest firmware?
Have you tried a different keyboard?
Can you send a screenshot of your wootility
I have seen more than one case where someone imported old profiles and it unbound half their keys
Yeps
I did imported one profile
From the 60he, i thought about that too. So im deleting it and starting fresh
Rgb is going to be a bummer xD
No need to delete whole profile
If a different profile doesnt work either you can rule that out as the problem
Anyways im a simple guy, i dont have anything special, just sentivity to 0.1 and did it mostly for the rgb setting
I was using the 60he+ you see on the back a moment before with 0 issues
I changed it to test differences and notice esc was not working and then backspace
Then I would use a new profile and see if it works.
Then work your way back to your desired config one change at a time, testing along the way.
(assuming it works w/out issue on a new profile)
Yep. I will start by sitting the usb port properly
And then delete old profile
And start fresh
If it is registering on wootility that rules out cable problem and switches? Right?
they sound pretty nice too
very very distinctive
i kinda really like it
Doesn't rule out anything with the switches, and doesn't necessarily rule out cable issues
Mine are
I am kinda upset at my post office situation tbh
The cable is one of the wooting premium coiled, iāve been using it since christmas with no issues
What happened?
There is a different office closer to me but i think i am basically at the edge of my post office area
So i need to walk 25 minutes to get to mine
edge spotted
When i could walk 5 to the other
I have the keycap set already, these are artisans
I will post pictures when i get home
Also got my maxgaming order in
Iād change the RT sens first, if that doesnāt help then make a bug report
then you can try whatever else
That is annoying. I have my own USPS SNAFUs for similar reasons (sitting on the edge of a zip)
this shouldnāt
happen on the stable firmware ofc
Also had to pay like 9 euro to get it handed to me, 3 euro import and 6 euro handling fees

If someone sends mail to me at the zip listed on my property's address the USPS will return it to sender without fail.
oh i didnt see the word artisans lol my bad im still waking up
If you want to see the cosmos in action check this thread https://discord.com/channels/167181566978555904/1342211699234832485
I can't help it but when I see them in pictures they just look like dusty BoBs
Yeah true
(also "Dusty Bob" is my new hacker alias)
Great to hear š
But yeah in shoddily taken pictures and in poor light conditions they do look like dusty bob
I don't think I've seen anyone take pics that match the initial pics under studio lighting, or come close
Silver lining about this: my walk there and back is through a nice park
Closest to touching grass i have been in months
(Still not touching it tho)
Do you by any chance own a backpack?
My shoes have been forced to touch grass
I took a narrow path and was on direct collision course with a stroller
Had to evade for my own safety
This is what I imagine my indoor cat thinks when I put her in the yard every couple years
She's probably older than some of the people in this Discord (just turned 18!)
Whoa
adult now!
Touch more grass
No
My cat is also like 13-14
Yes. Summer is soon
Aclimate with the heat
Allergy season soon
Gotta enjoy them and try not to think of those things too much.
I can tell my cat is getting older cause she gets into fights and gets hurt now
Firmly in retirement, gets whatever she wants and lives in the lap of cat luxury.
as it should be š
We had to change vets recently cause she got really hurt and the old vet didnt rlly pay attention
If we had left it like that she probably wouldnt have made it
Inattentive vets are š
Glad you could change and thought to
Alright one more since you guys keep asking for it
gaming
Cat looks flabbergasted at the concept of a handheld pc
I think she's just impressed with how great Proton is!
when I left my room once my cat was typing on the spacebar in secret
Sounds like they were running a numbers station šµļø
Impressed by your expertly stab tuning i assume
yeah she was making sure it doesnt rattle or tick
i just found out the RGB settings on tachyon mode was at 100%
could be that, but still the cable is good
Which one should go on esc and which one should go on mode key
lubing switches again has me FUCKED up
One with asteroid ring
Terrible picture god damn
Iāll take a better one tomorrow when i have more light
You made the right choice on the placements
I would put em there too
its time
pom better
Looks naisu
I feel like the spacebar could benefit with having an artistic representation of somebody landing on a moon.
something like this, but without the detail and shadow
are he switches heavier than mx switches? is math related to science?
Is grams related to a kilogram?!
No but biology is related to creamy
Sorry wet taps
i cant spend a day in this chat without someone reminding me a dude came on his board
comon man
duhuk looking good btw, i finished a row, 4 more to go
well this is as exciting as it gets for keyboard nerds
I ALMOST FORGOT ABOUT IT< FAK
Ay don't add krytox and shi
Or like don't add more lube
Honestly I forgot about it as well, so who's the real villain here?
i am only swapping the spring and lubing the spring
Good
Well you should spread the lube on the stem
I would do that at most
It gives a nice shine coating so it's a good sign that they put a good amount of lube
oh fck now i think about turingtest's cursed recording when i see that shit
Duhuks bettah

genty silent better
Wooting 2 just got delivered, can't wait to mod it when I get home after work š
Lekker v1 better
What u gonna do to it
Swapping in Geon Raws
Tape mod
Custom caps
I'll post pictures in #1070668460905988106 later
duhuk with 50g geon spring
lets go bro
lets go bro
Sounds like a clock
have you tried pp plate + froggy + duhuk?
Damn should I spring swap again
Just use my raws?
I don't wanna spend another $11 bucks just for the "same" springs
And wait for it
i dont think raws spring is the same as pingless
but i threw away raw spring already
i want to try pp plate with duhuk, to soften the sound a bit, but my worry is that with pp the board may become too muted.
How ass are duhuk springs
Asssss
btw how were the AE springs?
ass express
IMO theyāre fine, just too light
Idk why Tuan hates them so much
They have good variance compared to other springs/switches
Variance, spring ping, crunch?
idk
like what exactly is wrong with them
just the weight?
Should i lube the duhuks and the pingless springs or should it be fine if i just spring swap
Yes
And yeah idk the weight is kinda weird to me tbh
To me they are just light and they were pingy from factory/stock , I did lube them but I ended up spring swapping so I didnāt end up trying them lubed
pom spring best
surely oiling springs is good
but wont work in duhuks
Iād think so
Ikr sad
i am waiting, i am patient, i am contented, surely i am.

also iirc the flux on the product pages for duhuk were wrong right?
specified 50 on top when it was 20?
Yeah
@sacred elm
At bottom yeah
ya so that top flux aint bad at all
Nah itās actually good yeah
If you look at the switch list in #šŖāmodding_faq , you can see most switches had 15+- at top and 80+- at bottom
So 20-50 is not bad at all
Also these values are kinda just listed for quality control, I wouldnāt get too nitpicky about them
im more concerned about their stem design causing that tiny rebound on top out during harsh or quick presses
but i wonder how much distance that actually covers
TTC POM not listed
I know lol
It hasnāt been updated in awhile
I have access to the spreadsheet from Tirade tho
MY KEYBOARD SOUNDS BETTER THAN YOUR KEYBOARD
doubt š
its all preference
Interesting theory
yeah ik it was a joke on the keyboard preference thing as a whole
I prefer good sounding keyboard
hmmm, have you had misclick
i have had some misclick with timing pretty similar to what you described
i am using 0.1mm on all keys rn though, which is pretty low.
duhuk specifically
typing on them rn, hehe got it this morning
nah you just missed it, i lubed and installed them just 1 hour ago
I havenāt noticed any misclicks but I also donāt use 0.1 RT
Ah okay
I use like 0.4
#š§ākeyboard_modding message on my tofu 2.0
if you wanna hear it
Yeah same thatās why I didnāt bother ordering them
Lolz
not really actually. they are really smooth though
Hey I was in the process to buy a 60he module and Iām at the switch option now! I want to know what is your favorite and why! Thanks a lot šš¤š¼
Did you come live today? @harsh dove š
i think a combo of its tightness + 3.3 travel
I also donāt think it have enough force to rebound tbh, with the tension of the spring pushing it back
Itās not like thereās a spring at the top pushing it down
Itās only pushing it up
Nah, yesterday
Yeah they are smooth
TTC POMs and Geon Raw HE's are generally popular
tho POMs are pricier
i just increased the values to 0.16 and everythings good now
raws are more budget friendlyt
think there maybe a issue, but not sure the exact cause yet.
I will try out Duhuks but I might just keep my HE build with POMs for competitive games
and then mess with MX for the most enjoyable feel and sound
If youāre buying from Wooting, I like the POMs for their stability and smooth clean sound and feel when typing
The POMs rise to the top
You have to lube them tho
TTC POMs
Pros: Stability, Clean Sound/Feel
Cons: Price / Have to Lube which cost more money if you donāt have lube
Iām not sure how do I explain this but raws kind of sound sharp then the sound just gets cut off, itās kind of hard to explain, atleast thatās whatās I remember after seeing the comparisons on wootings yt page
actually i dont think the leg would be the cause, because double click happens mostly on my spacebar, which is like the heaviest compare to everything else. I think more likely the cause is just the lube
It had done so
how much is that though?
im unsure whether this distance makes a difference enough for reactuation but it does
What is that tested on?
probably a different pcb
I think adding extra 0.05mm in venom configuration would help if that affects you



