#🔧│keyboard_modding
1 messages · Page 530 of 1
Enough in stock Mark?
refresh in exactly 2 minutes 47 seconds
Enough in stock for at least the first ten minutes
I don't really know what to expect qua sales rate
Wonder who will be the first to place an order
I have the page open on the "New" items and refreshing!
maybe it was 4 minutes and 29 seconds instead
One final edge
Flawless execution

maybe the server will perform better if we all spam f5 faster
Yes
creating as many support tickets as possible will surely solve that
I think I refreshed too many times
but it's set to go live at 12:03

Shit's borked, pack it up bois
Why do yall want to buy these switches from wooting so bad?
Cant u buy them somewhere else
we do not question the path of faith and righteousness
Genuine question
Buying from wooting makes you a better gamer
a lot of ppl already have them, wooting is just releasing them on their store, so those who don’t can get them possibly faster
And what’s so special about the switches? They don’t sound particularly good
the wooting poms have more neutral color too
They have almost no wobble
and I wouldnt say they sound bad
atleast pom version
The raws also don’t have wobble, and sound better
very different levels of wobble
Raws have wobble
nah poms are a whole level above
raws are fine too, but if you've tried the ttc pom/rgb you'll know the wobble is very different level
thats barely any wobble
i mean if you don't mind the raw he no one is forcing you to change
some folks want the less wobble and it's very noticable on press
i know the press of the ttc should feel better
that much wobble is fine on a wooting, but it might actuate on the 0.005mm boards
what time will the switches be up for sale on the website?
Prob soon
0.000000001mm boards anyone
not everyone values sound above all other factors is the tl;dr for why some folks with jade pro/raw he want to try it. People have different priorities
https://youtu.be/VkZqRU6GXVc
my poms aint even that bad sounding tbh
Well yeah, also poms sound pretty good when hand lubed
I wouldnt say they sound worse than raws
theyre just louder
yeah poms when hand lubed are actually pretty clean sounding, just not low or subtle sound
does the rgb version sound the same as the regular?
there's honestly pretty big difference in sound with hand lube and stock kom stuff
because kom has no lube from factory on stems
so you've probably heard a ton of sound tests where they're not lubed and sound plasticky
rgb and regular sound a bit different compared to pom
I actually wasn't kidding that the deploy got borked

It'll go up today, once the devs do their dev things
Something something HR added a new department to a job listing and now the switches can't go live? Me no understandy
Instead, I'm having lunch
this is because you guys didn't pray and worship with us at our weekly ttc pom meeting
Tosti's 
Let's all pray together
When….
i pray our merciful god forgives the mistakes of the unbelievers
RapidTriggers were developed to input F5 at high speed
Never stopping
POMS ARE UP
...loaded as we speak
got mine gg
Liar. 🤣
Had me going in the first half

The deploy to fix the deploy so that the deploy can deploy is being deployed

The announcement of the announcement of the teaser of the announcement of the release?
the last edge of the final edge of the concluding edge
Whats gone launch first 5070ti or Wooting POMs?
Our launch won't be paper
Paper Switches would certainly sound interesting
Is it a very limited inventory?
All inventory is limited
I don't really know what to expect as far as sales rate
It would be crazy to me if the inventory sells out in a day
Okay thanks
Maybe a week? Still highly unlikely imo, I'd forecast at least several weeks of inventory
the inventory of prayer is never limited. May the ttc pom prayers be ever present

pog
letsgo
Cannot buy
wait this is rgb
no buy or price button. Truly mark has mastered the art
ohh they are both launching
What's diff
shee
Instructions unclear, where to insert credit card?
pom brings you closer to the church of pom god. RGB takes you away to the satanic path of rgb
Buy button exists now
we got a closed bottom switch from wooting before gta 6
Id stay with POM
okay not bad, sub $1 a switch
rgb does not have a separate diffuser though, I love this fact
Which one do I get ;_;
it's gods way to tell you to buy the wooting one
well not that easy
Almaty is the answer
No weight selection for geon raw?
Only one weight option
they just picked 50g seems, which is what 90% of people pick anyway honestly
Order EU305582H wins the prize for first purchase 

Ordered ✅
yeah youre welcome 😎
@slate fox
Want 40g 😭

Yes you were Theo, yes you were 

did you get poms theo
Poms

@slender pollen the time has come, the moment is at hand
I was about to stray from god and go RGB but
@carmine cradle
my bro thanks
lol at least the price of dollar went down since I ordered, so I made a new order for less moneys
Thanks Mark for edging me for a week👅
Deutsche post vs 3x more expensive DPD/GLS 🤔
Did you order on ali or woot
wait until we start getting the "which switch should I select for my module" posts with 3 more switches now in the selector
So I need the RGB variant if I like my RGB?
I got the POM version and can see the RGB jsut fine
ali, woot would cost me extra commissions unfortunately
the woot rgb looks nice though
POM version should have good rgb because of white top housing, not as good as RGB version tho
it's a good wooting content week
new switches, couple general videos and a stream as well

i saw sander was testing some different shorts content too
If the code gods smile on us this blessed day, we could even see Wootility v5 out of beta into stable
Poms will get me out of Gold in Valorant right?
Definitely
how is the rgb cheaper
I'm quoting you for this and making a hate thread if it doesn't.
Materials

Interesting
I'll prepare a highly sophisticated response; "skill issue"

hm? I thought they were the same diameter
seems wooting changed the spring length by 1mm too
Did you hand lube your poms?
Yea they're 5mm longer
20mm instead of our springs at 15mm
Nah not the same dia but they work fine from my testing.
length matters?
Not what would make them incompatible.
No
since ttc stock is 21mm and wooting one lists 20mm
joke not intended
I think they should work tbh
Length changes the characteristics
Eh? We didn't change the length and I swear I pulled 20mm from TTC's website 😐
Yea lekker springs should be compatible, length shouldnt matter?
The dia is different, they work but is different nonetheless.
thats milktooth
milk
you might have copied the scuffed stats from milktooth maybe
21mm on their marketing
💀💀
oh lol
ttc switches have 21mm 🤓 ☝️ and also lekker springs are compatible
milktooth just makes up half their specs i'm pretty sure. When i was filling in my switch table milktooth stuff would constantly be different from the official manu site
Mark did you stick with the factory lubing or lubed them yourself?
Mark never lubes
5.8 for TTCs and 6.1 for KS-20s

Assuming that’s what was tested and the reason why they list as incompatible.
maybe they went off simply due to difference of length and diameter
well I think springs on these switches are perfect so no need to change
This is why the guy who deals with freight shipments should have nothing to do with product launches 
yeah spring swapping ttc would be a bit of a shame. they have really nice springs in them
yeah
I passed these edits up the chain, they'll update on the website eventually
what is TTC’s variance is springs?
😕
dang it... i even made sure we have this kind of data for the launch
TTC didn’t give the specs for their own switches?
yeah
lol
they only give certain specs, but nothing on exact bottom out
it's roughly feels around 50g, but no one i know has been able to find any official bottom out
new talking point for sno's church: the switches came from god, thus the specs are unknown
it's hard to quantify the touch of god
I feel closer to god than ever before
mine says 27-13 march
I remember when Erik and Mark were checking out my build on contest stream, they said that they don't like clack, but here we are, 3 new clacky switches listed on Wooting store
Is Pom Pom out yettttt
yes

Pff we're already onto the next trend; ||redacted||
Waow
70pc for 65$
Pom pom!!!!
Pomade now pompadour forever
what do we ask them for leaks on in this weeks livestream though
That's not bad at all
raeds collab 
Tomorrow's livestream is going to be a special treat
we lost the switch angle, we need to move to a new leak angle
hell no
yeah, the knob, I’m ready.
No knob
give it to me
Don’t fight it

That’s what a knob announcement would say 
he said no knob, but he didn't say no knobs - plural
_>
trueeeee
they're launching multiple knobs
I knew woot could do it!!
You all are all the knobs we need
give us the knob u knobs
😳
I am the one who knobs
But are you knobbing
anyways im waiting for the sound test video till i decide if im buying rgb or pom
or if im buying at all
pom > rgb
im getting my before match 9th, we will see
ttc frankenswitch
I will test stock rgbs first, I think they might sound brigher, and then I will try using pc upper on poms and see if it is any different
ohh right I didnt think about it
and since the stems are all pom, I might just do it for the looks
TTC Ruby 
full white
Rip arc
😭😭
Gatekeeperon coming after you buddy
actual pomegranate switch
I don’t think top housing matters much on TTCs
for sound at least
they all got that silencer thingy that doesn’t really work
lol
what is that?
I didnt notice anything unusual I think
oh haha
that spring thingy hits the top housing
sound is pretty similar to me
just inconsistent kinda
Hi

Drakon did you get poms
yeah tbh I can hear top out pretty clearly which I actually prefer so im glad it doesnt really work
yeah it depends on how quickly you let go it seems
sometimes it’s completely quiet
but most often it isn’t
Real question, can i change the case (plastic to zink) without removing keycaps and switches?
Yes
Are the wooting branded switches just cosmetic differences or are they tweaked spec wise as well?
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: https://www.wooting.io/support
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE https://wooting.io/wooting-80he
60HE https://wooting.io/wooting-60he
Two...
pommin my pom
Now it’s just lekker v3 
Spring weight is the only difference
theyre identical
Oh man
They will take you pro in marvel rivals 🤓☝🏻
SEN shafie, world isnt ready
Okay I just got my board yesterday, and I'm like a heavy research person but new to HE keyboards lol.
Take your time it’s a fun rabbit hole (esp keycaps)
I already ordered keycaps lol I have mechanical boards I've messed with in the past. But I have GMK cosmos caps coming in the mail lol.

maybe pick drx instead
sen shafie may not be the way right now
question is what is this special stream mark has teased tomorrow
don't worry drx will have a marvel rivals team too to make sure to fully wipe sen off the map
the korean overlord era has begun
marvel rivals pro matches going to be super boring to watch
they will 100% use 3 healer cancer comp
casting might be a bit scuffed for first tournament too
yeah
it clashed with valorant masters event so some of the casters they wanted may not be available
Is this the factory lube ?
yes
nvm xd
Well i like it stoch so i might get them and just not hand lube cause i dont want to sit hours at a table to lube everyone of those
Lubing makes them smoother
you do you
Well i can do the lubing in a couple off days and not aal at once i guess but i am afraid i will overlube or underlube switches and then they will sound and feel different no ?
geon raw or ttc kom for 80HE?
If you can spend 90$ on switches then ttc
I like POMs more, but if you’re on a budget RAWs are the pick
It’s pretty hard to overlube honestly if all you’re doing is brushing the stems
would love to have a more thockier sound, are both similar?
Nope
All clack
Just woke up from my nap, woot poms out yet?
Yessir
yes

If i just lube the stems of the poms should i be good to go then ?
That’s all you really need
That’s what I did
And super lubed springs in a bag
Noted.
im gonna do stems+springs
My hands were hella greasy
Always springs
I like being greasy
Ok ty very much i will get switch opener set from wooting then and the poms krytox 205g0 is good for the job right ?
Gabagool type shii
“reasonable”
Yes
That’s the price for god to find your soul for the rapture
either extortion or exorcism
Ok nice sorry last question do you know how many keys the venom 7u has cause then i know how many i will have to lube
I’m just glad I have no regrets about ordering from AE
Price the same and I get lighter spring
I know nothing about venom
depends on layout
using split backspace?
any other switches that are on the thocky side besides that? 😂
Tsangan
Yes
Based raed rejecter
No! No true thock other than Raeds!
Your soul was found worthy
Forget thock
become clack enjoyer
Just ordered the Wooting x TTC switches, tried the LekkersV2 for a long time but wanted something better
So you did not lube the housing or the spring right only stem ?
For POMs I applied a decent bit to stems and bag lubed springs with super lube
But are the spring necessary or nah ? Cause i will get the poms and switch opener
I’ve always done springs for all my switches
just watched the video
the rgb ones sound so similar to the pom ones, if not even better
No reason to not imo

Sorry aligner, it’s the hard pill nobody wants to swallow
Wait i have never seen that i will check in yt how to do it
Esp for team thocccxqqwqww
I feel sorry for everyone’s neighbors here
I hope you’re in a HOA and get kicked out
respectfully
On god I’d rather jump off a bridge and end it now than join a HOA
respectfully
They’re really not that loud unless you have the worlds most sensitive ears
it’s so funny honestly
we lost sander to the brainrot ai videos
Name a louder switch
poms sound cleaner to me
Original KOMs
POMs didn’t have that stock sharpness
they sound so similar it's barely noticeable
If you watch other comparisons you can hear the difference
Guys geon raws have hole on bottom housing?
Yes
are they on a wooting zinc case tho?
I thought they didnt have one
sharpness eh, in terms of db, POMs def louder
I mean there was a reason I hated TTC switch sound for months, those KOMs were absolutely atrocious sounding with ear splitting sharpness
the only switch louder are Jades with a click leaf
I think lube would help a lot with that tbh
I bought Poms expecting something similar and ended up just being a louder sounding RAW switch with no stem wobble
omg i wanna cry
right to left- regular, rgb, pom
For most tests it did a bit
Yo @sacred elm , do you think the factory lubing job is better on these?
I Lowkey might just get everything today
On the poms
I dont think so, Mark said they are identical so I doubt
Tiny one
It’s kinda like mouse skates, if you have a fast pad you pair it with slower skates, same with loud switches just get a softer plate 
Like the factory lubing not being great
POM + CF enjoyers 🧏♂️🧏♂️💀
If you dont want to hand lube, poms should be still good
The RGB was fucking mud with that combo
the regular magnetos sound the best out of those
I didn’t notice a big drop off going to FR4, but it’s been a better experience
Hmmm okey
I have no idea how to hand lube, that's why I'm asking
how is that even possible if they are the same length
Did you not see that long quest-journey he embarked on to bring us new switches?
I guess not 😅
@tropic urchin lol
first on the right?
After months of gathering... We finally have enough stock to last on our store.
Geon RAW HE https://wooting.io/product/geon-raw-he-switch
TTC x Wooting KOM RGB https://wooting.io/product/ttc-kom-rgb-switch
TTC x Wooting KOM POM https://wooting.io/product/ttc-kom-pom-switch
Wooting switch pack https://wooting.io/product/lekker-spring-packs
✨ Fo...
first on the left
those are poms
Man what am I gonna do with all these poms
TTC springs were the first long springs to feel similar to L45s in Jade pros /shrug
Maybe even faster with faster rebound
then why did op say Right to left = regular magneto > rgb magneto > pom
but if those are the poms i guess they sound better
typo
Default jade pro springs didn’t feel like that is all I’ll say before I get placebo cope Josh skibidi rizz Ohio ppl coming for me
Did you order wootpoms?
I respect the sander x movie recap intro
Yeah, going full pom on my 60 as well. Not sure which will get the heavier ones yet.
Did u bag lube ur springs for ttc if i may ask ?
i did
I had originally kept my 60 as my quieter board, but now that it's in Salv the poms aren't nearly as loud anyway (have them in WASD now)
Oh ok cause i dont have an oil based lube i only have the krytox 205g0 and the molykote one
spring lube is optional honestly, the stock springs aren't bad
Man, interested in getting some switches to replace my Lekkers, but don't happen to want anything that's louder. The RAWs still king, I guess?
Ok nice so i will just lube the stems do i do all 4 sides ? Sorry if its a stupid question but its first time i am gonna do this
i did all 4 sides yeah
RAWs will still be louder, but they’re still the king for low cost switches
just a light brush on each side is plenty
Ok nice ty
Huh, wonder why Sander said you can't spring swap Lekker springs into TTCs. I didn't actually take it for a plugged-in test run, but I did spring swap them for a minute to test them out and it seemed like they'd work fine.
probably didn't realize you could spring swap it I guess
He's literally talking about spring swapping at the timestamp in the link above, but says you can't do it for the TTCs 🤔
You seem too active... definetly you are new "important" employee definetly not customer service..
Ty very much i appreciate it cant wait to try out poms on fr4 in frog mini 🥳
theyre not king, but good option
My thoughts exactly. I assume that it’s because they do use a different spring diameter.
They work fine, but still.
hasn't ponz been around for ages lol
5.8 for the TTCs and 6.1 for the KS-20s
Exactly this
jakubix leak matrix may be broken, needs a reboot
Wait so jakubix’s title isn’t true then he doesn’t speak only truth 
Fraud, deceiver!
Unworthy
Were there any issues found from the testing you guys did? From my testing they seemed to work perfectly fine without any issues.
Price😵
Thats lies
Your church doors have been closed, deceiver
Extra wobble when putting an Lekkerv2 spring into a TTC RGB
I think it needs shutdown
see if jakubix can predict whatever the big stream spoiler is for tomorrow
mark said tomorrow was a special stream
Gotcha, thanks for the info 👍
I’ll wait for other stores to stock them so I can buy 10-20 pieces. 70 is way too many.
Hmm there is few topics
More loose probably? How would a spring affect actual wobble?
Hey guys switch tool set from wooting good for the job ?
Do you want me list them all?
it's fine, they're all fairly basic
no
bro gonna say raeds
I may have to do the TuringTest WobbleTest ™️ with a lekker spring swap when they come in.
you have to predict one thing, otherwise that's cheating
It is too soon
Though I will say this is my personal testing, not absolute science, results may vary 
wider diameter spring i assume introduces extra play
Ok ty
or it doesnt properly fit into the chamber
Definetly they will update on white zinc v2
Doubt it.
the jakubix matrix needs to predict the special part
then it doesnt play well with the chamber?
Special?
Where he said it is special
Also didn’t seem to be the case. The KS-20 spring was looser around the center pole thing in the bottom housing but not sure how that could have an effect.
then i wonder
If the spring is keeping the stem in place then something isn’t right already 😂
yeah it's basically very similar to aliexpress max coupon stack pricing, so it's a good price
Yeah was totally expecting it higher
He said it in keyboard modding. It would be propably update on owlab case or wooting 60he 2025. It would be one of these two

no
Ok i ordered the ttc poms and the switch opener set lets get it lets go
Because they have to wait two weeks to check cases
So definetly it is one of these two
venom frog pom fr4 gang
Welcome to the church
Luckily its foe my venom and not for wooting 80 he so i only picked the 70 pieces bag that saves me some money hehe
Ty
Yup yup haha
And it would be perfect because they can double dip to sell us upgraded 60he and owlab case
Finally you guys added geon raw hes, i had to order from Korea directly and paid 120 to get em to eu, love my country
You could also just not put your most expensive switches on the F-keys and nav cluster, stuff you don't hit that often
To stretch them further
But I have no shame 🤷
@glacial wind i have to open file on ponz
He knows stuff
After I learn his position in wooting i will know how much he knows
wait sander is using a6600 still? that's surprising
ttcs are not lubed right?
sander shouldve added wobble test too
not from factory no
so is geon raw the go to?
personal preference
i dont know what to choose
TTC POM superior switches just saying
i like raw sound but ttc are more stable
(never used them btw)
RGB is also nice as well if you're into that
Yes but I feel closer to god now because I ordered them

confused because of this
Kind of wish I didn't grab POM ahead of time tbh
Raeds are superior
Stop
Would have gotten the ones from Wooting instead
they are lubed but not well enough to count

well they have a little drop of lube at the bottom
just 3 dots in the bottom housing
lmao
not on rails or anything
ttc version of lube is 3 dots of lube in bottom housing and no stem lube
^
Eh you have the lower spring weight, and we all know lighter weight means better 4 gaming 😉
Its called doing the bare minimum to say “pre-lubed”
I actually like higher spring weight haha xD
so the wooting ttc pom dont come lubed?
not in any way that matters
and raws are lubed?
#🔧│keyboard_modding message see here
Raws are lubed
I think the dots do help/prevent spring ping
this is ttc lube in the photos
Quite well from what I heard
nothing on stem, and 3 dots if you zoom in on the 2nd photo
im so indecisive
Get the Poms in that case
I got rid of all my lubes except bdz and tenga 
coin flip 😃👍
Wise man 
Get both
pretty much - more than stable enough, sound good, feel good, and are VERY cheap vs whatever else they have

pick whatever you prefer. Raw he are prelubed, ttc pom/rgb are more stable on wobble but not prelubed and louder
no
You mean rattle sound?
yeah that's more on stab lubing
ttc pom will make your space bar move less, but it won't fix stabs that need a tuning
with raws it will be better, my spacebar was so wobbly with lekkers
its so anoyying
with poms it will be even better tho
Hey folks can I use the new switches on my (original run) wooting 2? ;)
Wooting two or twohe
Oh right gotta be HE 🙂
The original version without Hall effect
Then no.
You cant then
I’m more curious as to how much time sander spent finding the exact same ai voice as the movie recap channels
Spent $180 AUD for TTC pom switches just for quoting to release their collab for $140
(good news for everyone else, y'all enjoy the discount)
hi just got my wooting a week ago or so, never keyboard modded or anything before so I was just wondering if there are any mods you would reccomend doing (i.e. aluminum case, coil cable, switch plate, etc.)
i will say i feel like the stock switches are a little bit heavy imo
or if its even worth it
Coiled cable is just for visuals
The biggest change you can make to the feel/sound of your keyboard is changing the switches
Silent switches when
i saw they released a couple new ones
try geon raws, they added them in store today
is there any consesus on which one is the overall best? or is it just personal pref lol
If you scroll up just a bit they've been discussed all morning
the ones i get will probably stay on my keyboard for a while tho
And it's always personal preference, though the KoMs have the least stem wobble
hmmm
ffs, ordered 80he yesterday and then ordered more geon raw elsewhere… then I see this announcement lmao
should i also get their switch kit or just get off amazon or something
TTC switches have almost no wobble, they are loud and clacky but also very expensive
Raws are very good for the price (2x cheaper than ttc), have nice sound and good wobble, but worse than TTC switches
If you dont mind spending 90$ on switches, id say get ttc poms
what about in comparison to the stock switches
not everyone has to buy 90 switches
ah yea not 90$ for you
u think 65$ worth
TTC switches have heavier springs than raws btw, 40/55g and 20mm spring
Raws have 36/50 and 15mm spring, they will feel way lighter
i mean im not even super good at any games that i play but im just like if im gonna pay for something at least make it good lmao
u think ttc will be better for analog input because of the longer spring
or is that not how it works
$90 switches to offer as tribute to Gateron so they can make better Gaming type shii
type
If I was on a budget and it was between raws on everything or kom poms on alphanumeric/stabilized keys, I'd do the latter any day of the week.
Yo! I have the stock Lekker v2 60g in my wooting and I find them kinda tiring to use while gaming for a long while (esp holding down that W key!). Can anyone give me their opinion if I should go with the Geon Raw 40g or 50g?
One thing folks haven't brought up yet today is the build quality of the raws
oh are they not that great
They are not great
yeah i think longevity for now def takes priority
this.
at least until i get more money
If you like FPS 40g are nice (used 42.5g on Jade pros), if you just play single player 50g is fine
😭
Clips/legs break off pretty regularly if you're pulling them out much, and the light diffuser has a tendency to yeet itself away from you if you are disassembling the switches at all.
I only had to remove 1 geon raw with pliers wdym?
Thank you!
I HATE rgb diffuser
Anyways i folded under pressure and bought the poms instead of rgb ones
It's my personal preference, but if I had to choose between not-crazy-expensive switches, I'd go with Jade Pro over Geon Raws any day of the week.
Welcome to the church 🙏
Turing spitting facts
whats the rgb difference
i heard a lot about the jades
Its a small piece of glass at the top of the switch that lets the led shine through
In one of my geon raw switches it came lose and you couldnt pull out the switch
oh yikes
I assembled my ttc poms without diffusers after lubing
Any difference you could notice? I imagine it serves as a light guide, so maybe w/out it they're a bit dimmer?
The RGB on Wooting POMs should be decent, I have the OG POMs and RGB is fine with FR4 plate, so you should be in good hands
Just don’t get a dark plate and I think it should be within acceptable ranges
there is no rgb on venom, but my caps led is quite bright
alright ill probably go with the poms
while im at it what else should i get
bc i wanna only take this thing apart once lmao
The 80he has a pc plate so that shouldnt be an issue
Can you explain what the plate does for a novice please 🙏
Maybe lube kit?
Are you gonna lube them?
A case
yeah fs
i heard a lot ab the tofu
i just know that as a food
n idrk if there are any differences in keycaps but pbt should be fine no?
If you are willing to spend get a case too, if it’s over your budget get cheaper switches and a case
Lighter plates don’t darken RGB (used carbon fiber plate) with the OG POMs results in the muddiest and darkest RGB imaginable
I think that's all you need then, unless you want to pick up a metal switch puller for a couple bucks. Some folks can't even get through pulling all their lekkers once w/ the included puller 🙂
But plates influence the sound and feel (depending on your preferred softness or stiffness)
There’s also the holy 60 which can sound decent but most people buy it for the look
#🪛│modding_faq message good read if you wanna learn more
budget not rlly small rn lucked into getting a 5080 msrp
thank the lord
New MSRP or OG MSRP?
og
Gotcha. So PVC plates softest, carbon soft"er", and metal would be the clackiest
Overpriced anyways
🤗
yeah fr but its like slightly cheaper than what i got my current graphics card for
PP is softest, steel is hardest, but carbon fiber should be pretty close to steel for stiffness without being metal
Soft pp
someone ik won it in a coding comp lmao
so holy 60 or tofu
is the one they got on their site not great
There’s plenty of case options for the 60he
Don't discount the most fun choice of all: the RNG Salvation
It’s aight just pricy
Holy 60 has holes in it like all good things in life
bet ill prolly look through reddit or sum before buying
60 doesnt come w plate right
i think ive seen ppl put foam inside too
60he+ modulecomes with PC plate, prebuilt with steel
Why did wooting only offer Geon Raw 50g on site and not 40g?
No wonder Yaperon wants to go to court, they can only do recolors 
lol every time you mention them there is a new funny name
Gatekeeperon is still my fave
I came up with Yaperon but I do enjoy the many meme names
Gatekeeperon is my favorite
Prebuilt comes with steel plate
is there a difference?
why is pom more expensive than rgb
Oh shit you're right, my bad!
Steel is way stiffer and louder than PC
likely materials, but also full pom switch sounds like something many keeb enthusiasts will appreciate, so the price is higher
funny enough the og TTC POM and RGB price diff is way higher
btw im going to have to hijack the name pomegranate when I make the red ttc franken

I give you title permission
Out of the 3 what is the best new released switches by wooting?
You could do POMegranate hehe
are the ttc poms louder than lekker v2?
The church welcomes you
Thank you. I feel welcome
Yes
yes
damn
Most switches are louder than lekkers if we’re being honest
With notable exceptions
i like quiet switches but idk what would be some good ones
You could check out raeds, they are very quiet
You’re only supposed to say the thing when MJ is around
hi anyone know if those are the sticky rice v2?
https://a.aliexpress.com/_EQaaYpE
idk if there's a v1 or only the v2 version
he would say raw > any other switch
Dont buy sticky rice switches
Gotta ragebait the ragebaiter
Do you have a link? i cant find anythin
they are just worse than any other alternatives
He’s losing in life if he isn’t sponsored by Geon at this point
i heard some videos and they sound really good, what u think is better?
raws, jade pros, ttc poms
#🔧│keyboard_modding message If you wanna hear them
people put way too much stock into sound tests when so many of them are edited or just recorded on genuinely awful mics lol
sounds nice, how easy is it to lube switches cause i see they dont come lubed
meant as a general statement, not saying that about Cam’s test
They can be helpful as long as you are reasonable about what you can get out of them
nvm i see wooting has their own lubing in faq
lubing is not hard, just very time consuming and can be hard to stay consistent as you do it
do i lube the ttc kom pom when they come in? 
I have no personal experience w/ raeds. just passing along that Cam used them and seemed to like them well enough, and they definitely seem quiet.
im quite sure raeds are lubed
says unlubed on omnitype
we need roller ball switch to come to HE 
damn really?
Well they don't have springs that's true, they're rubber dome.
ah
are the pom switches like a lot louder than normal lekker cause they seem about the same in the video on the website
they're definitely louder
jade pros 😛
is there any good alternative that isnt too loud cause i messed up a couple switches or do i just buy lekker again?
raw he will be kind of in middle
so louder than lekker but not as loud as ttc
Unscientific but may give an idea
Get Jade pros
anyone have the clear 2048 keycaps?
ttc kom vs raw he?
i have the raw's already but what is the consensus around these ttc ones
KoMs are louder, have less wobble, and have better build quality.
^
and Raeds are slightly lubed.
Not sure why Omni states they aren’t.
Finally got a reason to use the 80he store credit
Whats the difference between them?
I believe the ttc would feel smoother and stable but have bad sound
Jade pro have the best sound but feel mushy at the bottom
Raw he sound fine and have the most mechanical switch bottom feeling
Sorry but I gotta disagree with almost all of the above
imo jade pro are the closest to mechanical, but still quite far
Jade pro doesn't feel mushy, it's got some stem wobble though. KoMs have the sharpest feel on bottom out. And sound is entirely subjective.
In my experience POMs have similar sound to RAWs but louder
Bro said “bad sound”
Both have the squeaky clean stable sound to them
That might be the goofiest gif I’ve seen in a minute LMAO love it
Jade pro feels little mushy when the stem hit the bottom like hitting some lube ig
Maybe some lube got onto the magnet causing that
Bro is full of hot takes
I’ve had that happen a few times if you hand lubed them
I left the factory lube as is and don't feel any mushiness 🤷
Perhaps only happen on specific batch, no idea
Oh least we know what tomorrows livestream is now
queue the when x wootility updates questions for tomorrow
Where is the knob and artisan keycaps
Don't hold back Bigsly!!
It’s stream with wooting devs
Is it related to your pfp shirt color 👀
Better be switch selector smh
You can ask them about it I’m sure
I am so ready to ask "when switch selector and 0.1rt"
I assume will be a qna session for more dev focused stuff
(my DMs aren't open)
im going to DM with same question rn
might be new artisan link
I have two boards w/ 0 artisans you better not
pspspspsps artisan can’t hurt you
Hey guys do you know where i get a metal sponge for my Alumaze 60 friction pad mod?
Pom goated material
jfc
?
i know i allready Dm u
Are you fucking w/ me right now

lol
Never seen Turing mad before 😳, new content just dropped
I'm not even mad, more baffled
i dont know how to find i bc i searched on amazon and ddnt find it
He linked it
DUDE TURING LITERALLY PINGED YOU WITH AN AMAZON LINK
Usually you are the more tempered person in this discord 
srry i ddnt saw it prob need some glasses
@half shale Make sure you test for continuity. I think we already talked about this, but you may need to scrape off some of the paint where you place the pad.
Wooting new v5 update worth it or nah?
Coming from which version?
I guess read the changelogs and see for yourself https://wooting.io/wootility/changelogs/5.0.0
Yes
Double click to select keys with same config
TIL, this is a handy trick
What’s new about it brotha ?
were you using v4 before?
V5 is new wootility and you are supossed to use it
Yes I think so?
Probably better stability than last version
New streamer setup
v5 looks better
also you can set separate rapid trigger on keys
Just use the second phone for chat rn lol
thank you shf
I'm curious about how the web wootility v5 detects memory usage
Afaik it requires a background process to achieve
which seems nearly impossible with a web application unless you keep the wootility open
so essentially around the same price as ali?
background service is going to be available in future
you wont need to run wootility
Yes, slightly cheaper
Which means a local service needs to be installed?
Im not sure, ask here https://discord.com/channels/167181566978555904/1342170938166218762
actually probably still slightly cheaper compare to ali because of tax and stuff
I assume doesn't work with geon pingless either
Wootility is only needed to change your configs. When the background process is released, that will need to run at all times to feed system data to the board (if you want to use it).
somebody from wooting team said that with other springs theres extra wobble
(I doubt thats the case)
should be fine with all springs
interesting, curious about the cause if that happens
do you have ttc switches ?
nah to me not a good deal, you are paying too much for less wobble and loud sound.
oh ok i was just wondering
I may have to do a lekker -> pom spring swap tonight and actually plug it in/do some testing
One switch only though 🙂
one thing that i am most interested to do at this point is to improve my raws with some geon pingless spring.
How is the rgb on both the new ttc x wooting?
jade pro and tofu 2.0 i honestly still want more out of it. my salv + raw combo is too powerful
i want both at the highest quality i can make them
Excellent on the KoM RGB, Fine on the KoM Pom
is the difference big? compared to lekkers, i mainly play fps games.
Thank you 🙏
RGB on both should also be better than the red purple OG colorways
^ agree
even then if you pair the OG with a light colored plate the RGB is doable
Just copped one :3
If both are fine enough for the rgb am happy
But ofc the rgb version is better due to the transparent housing
But I got the pom cause it looks nice to me imo
the white pom does look nice 
Not a good deal to me
make most of the switches white wooting pom, then get a heart shape with regular ttc pom like eric's recent build with the key caps.
you will know its there even if you dont see it
well since its your idea, I implore you to use that creativity and get your own 
waste of money to me
never know until you try type shii
I will try and eat them
Finally someone willing to do the real testing. Thank you.
ill have 6 extra poms to eat👅
bro trying to convert me

I dont know what you're talking about
welcome to the church of superior hall effect switches
Maybe mr Arc can gift you some of his RGB switches as tithe 
Dessert 
is nice to see the discord ablaze with questions about them
yea



