🔧│keyboard_modding

[random loom]

Imagine

[calm pulsar]

aint compatible 😄

yeah but maybe geon's plate is a bit different
I have an alu too, tbh it doesn't even feel that loud

but might also depend on how you record it

[fluid ravine]

honestly it's not bad but i would let the lube break in and send another sound test another time

[safe stag]

I can send one in a week or two to see the difference

[fluid ravine]

6 hour session of monkeytype

[safe stag]

lol I'm too bad at typing

[fluid ravine]

i was typing all my thoughts out last night when i got home from my volleyball game

[fluid ravine]

i mean ay you take that chacne to practice so why not

yknow :)

[tropic urchin]

@calm pulsar when do your maxes come in, I'm interested to see how you feel about the stock lube

[calm pulsar]

yeah I will try them stock initially, might just lube the springs
I remember geon saying it's even too much lube lol

[tropic urchin]

Bet

I really liked the stock sound so far so hoping I wont have to lube them

What do you usually use to open the switch

I might end up doing the springs since they should arrive alot sooner than the 80

[calm pulsar]

a switch opener

[tropic urchin]

just any random one off amazon?

[calm pulsar]

just a random one from aliexpress or amazon will do

[stray tiger]

I can try the aluminum tomorrow. Here is the POM plate with Jades vs FR4 plate with RAW's

[calm pulsar]

but I will be ordering the geon's one

[tropic urchin]

word

Geon switch opener looks hella good

holy

[calm pulsar]

awesome, thanks for the comparison!
yeah me being a fan of clack I like the fr4 more here

[calm pulsar]

yeah super nice

[tropic urchin]

Yeah Im getting that one

looks super simple

[stray tiger]

That POM plate does a number on muting the sound

[polar girder]

Oh fk

I should’ve got POM!

[tropic urchin]

green geon switch opener being sold out hurts my soul

[stone flax]

@polar girder put a blanket over ur keyboard

[calm pulsar]

lol I mean all the softer ones are probably very similar

[stone flax]

if u truly just dont like hearing it

[safe stag]

xD rgb on jades is equivalent to the jades max with tachyon on

just use a switch puller

or unscrew you plate and push them from under

[random loom]

Guys question which one is better for stabs GPL 105 or EM-50

[safe stag]

is you switch puller hydraulic pliers

the middle of the switch (on the hole for the magnet if it's lekker switches) and it shouldn't be hard

between the two legs

👍

no, just do it above a table

I've people smashing their keyboards and the keyboards were still ok

[exotic herald]

just got a 60he and i need fire new keycaps any suggestions?

[safe stag]

When you smash on your keyboard you smash on the switches

are you trolling or not

because it looks like trolling

for real

[stone flax]

they just fall out

[stone flax]

https://www.alexotos.com/keyboard-vendor-list/

[lapis elm]

Anyone getting the jade maxes?

[robust siren]

Pierre is currently lubing(?) them

and assembling the keyboard

[lapis elm]

I saw his video, but his sound quality is really bad haha

[robust siren]

😅 well no sound test videos are ever true to what they sound like irl

[lapis elm]

Yeah, they sound widely different depending on the videos

im just kind of wondering if I should go with the Jades or the V2, I think I prefer the sound of the jades

[robust siren]

GEON Raws are always the answer

https://tenor.com/view/ascending-heaven-keanu-reeves-constantine-ascending-to-heaven-gif-11437079898090715826

[safe stag]

-> jades pro

[safe stag]

Did you saw the second one ?

#🔧│keyboard_modding message

[random loom]

Agreed

[uneven cradle]

https://tenor.com/view/monday-night-raw-wwe-raw-wrestling-2020-gif-19125491

[lapis elm]

merci! they sound pretty good no?

[safe stag]

Yes, thockier than normal jades

[lapis elm]

You prefer the pros?

[somber roost]

just curious, sound wise would you say they’re higher pitched than v2s? if that makes sense

[safe stag]

But you have to handlube them to get this sound

[uneven cradle]

Yeah they are

[lapis elm]

ah ok

[somber roost]

ah thanks

[safe stag]

The max yes, the pro are basically normal with dual rail. I really like normal too soo

I slightly prefer the max over the normal/pro sound, still the normal sound is great imo

With the max you lose this majhong sound

for a thockier sound, waayyy better rgb than every other switch

[lapis elm]

The sound of the Geon Raws HE is interesting

To me it looks like the Jade Maxes could be tighter than the Raws

[uneven cradle]

Don't really see how being tighter then raw he would provide any benefit they are already at no rattle

[lapis elm]

that's good to know

[uneven cradle]

Upgrades at this point would be different material/design for better sound profiles that more match mx switches

I'm sure as HE switches mature they will figure out ways to make different sounds

[idle flint]

Hey guys I just got the Geon Raw HE switches but no matter what I do it doesn’t seem to fit into my pcb. Does anyone know what Im doing wrong?

[uneven cradle]

How are you trying to put them in

And what are you putting them into

[lapis elm]

@safe stag What about the typing feeling? How do they feel?

[idle flint]

Into the 60HE and just one by one without removing the pcb from the case

[idle flint]

These have 2 extra bronze prongs at the bottom as opposed to the lekker switches that just have the 2 plastic stems so I dont how to make that fit

[uneven cradle]

Did you get geon raw hes? Or geon raws?

Sounds like you got the mx switches instead of the HE switches

[idle flint]

Omg I did

Damn it

[lapis elm]

dang

[idle flint]

Welp there goes 60 bucks

[flat cobalt]

@polar girder bro did you see the Salvun Cosmos!!!

[random loom]

Just refund

[stray tiger]

Im not a fan of it myself

[flat cobalt]

I love that finish so much ;3;

This one goes hard too

[stray tiger]

I do like that one!

[sweet oak]

Space chicken?

[random loom]

Ok whoa

[random loom]

That looks good

[polar girder]

What

[flat cobalt]

They brought back the rough and fabulous

[polar girder]

Oh snap

Nice

[mellow rock]

chat i just opened my keyboard box and how come mine sounds so creamy and thocky stock compared to others i’ve heard

it sounds modded unless im just so used to my shitty ducky keyboard

[sweet oak]

Because sound tests will never be truly accurate to your environment

[mellow rock]

it sounds beautiful. i can only imagine how it sounds modded

the key presses are so smooth 😫

[sweet oak]

Hope ya have fun!

[mellow rock]

what’s the stock spring rate for these switches? i’m gonna get either jade pros or raw he but i think i might go a little lighter

[stone flax]

bro

those are not raw he

those are mx

😭

[robust siren]

stock is 60 grams, jades are a little less then that and raw have 40/50/60 grams

[random loom]

What keyboard

[idle flint]

I know 😭😭😭 Ive never bought switches so thought there is only 1 version of Raw and its Hall effect

I emailed them to see if they’ll let me swap it

[stone flax]

ummmm

theres more than 2 versions

but there is only ONE GEON RAW HE

[tidal frigate]

There is a lot

They differ by spring

[robust siren]

theres only 3 even if they differ from spring

[mellow rock]

60he

[finite carbon]

what would be the best screw in stabs for the 60he+ ?

[robust siren]

right now its sw knights

[finite carbon]

ive read that tx and stabies do not fit

[finite carbon]

do they sell on aliexpress?

[robust siren]

i dont think so

or at least i couldnt find it

[finite carbon]

i'll have a look on google, do you think it will make a significant difference from stocks?

[robust siren]

i heard they are easier to tune

and get it sounding good

[finite carbon]

cool, long pole or normal?

[robust siren]

are you us by chance?

[finite carbon]

EU

[robust siren]

oh

[robust siren]

uhh you dont need long pole

[finite carbon]

alrighty thanks, now i need to decide if i need the 70 v2 leekers xD

[robust siren]

hold on

i just had this discussion yesterday let me find it

[robust siren]

if youre sticking with lekkers you dont need long pole

[finite carbon]

understood, i will stick with leekers for sure, i really like them

forund the sw knights in eu

30 euro w shipping

[robust siren]

thats quite a bit haha

i paid 26 usd for mine with shipping

[finite carbon]

well is about the same as the tx on ali

so for sure the sw knights 2 fully fit on the 60he+ right?

[robust siren]

just remeber that the space bar is the 6.25U wire (shorter one)

[finite carbon]

yeah, i think the pack includes both

[robust siren]

it does

[finite carbon]

was also checking the wooting coiled cable, it is amusing to me that it costs as much as a uWu keeb xD

[wise sand]

anyone know if using switch pads will screw with the sensors?

nvm i think it does

[quiet bay]

they look like the same ones I use

they don't rlly do much to the sensor as long as it's thin enough

[fluid ravine]

Well uh

That's not good

fixed it 👍

had to readjust the screw

screwed it too tight

[mellow rock]

anyone got a good white color? i feel like the main white code is a little blue

[static tendon]

I was recently watching a video on a 80HE and it looks like you can customize each key individually with Rapid Trigger. From my understanding the 60HE module doesn't have this option, you can either disable it for certain keys or enable it for all keys selected but can't customize each individual key for separate custom Rapid Trigger settings

For example, I want to have my "F" key to 0.15 Rapid Trigger while all the other keys I want to be at "0.30" Rapid Trigger. Anyone know if I'm correct or does the module also have this setting?

[uneven cradle]

There's no difference between the module and the prebuilt one just doesn't come with keycaps and switches

[static tendon]

These settings look different from each other - Module/80HE. Mine do not look this way but it's maybe because it's some beta version

[static tendon]

^

[uneven cradle]

https://v5.wootility.io/

[static tendon]

This is the one I was using, is it some old version? https://wootility.io/

The one you linked shows "v5" I thought since it's browser based, it would always update to the latest version automatically

[uneven cradle]

V5 is the version used for the 80he and the one that is in the quickstart guide

[static tendon]

It's possible i'm doing something incorrect but my module doesn't pair to this version of Wootility

Seems it has a seperate software from the module

[flat cobalt]

I’m gonna get rid of my 2 Tofu60s when I get that Salvation in the mail

[static tendon]

What color case did you end up getting?

[uneven cradle]

What happens if you click the button to take you to v5

[flat cobalt]

For the Salvation I got the Rough and Fabulous

[static tendon]

Didn't see that color here https://novelkeys.com/products/salvation-keyboard?variant=39566383055015

What site did you order off of?

[static tendon]

It asks me to pair, I select my device but nothing happens. It's like it's only for the 80HE

I'd assume there's some differences like the 8k polling rate along with the custom rapid trigger per key setting that the module currently doesn't seem to have

[uneven cradle]

Are you talking about the 60he module or the 80he module

[static tendon]

Seperate software, module is now outdated 🥹

[static tendon]

60HE module

[flat cobalt]

Let me get you the link

Since it’s a collab

https://salvun.com/products/salvation-x-cosmos

[uneven cradle]

Well both should work with the new wootility v5

[flat cobalt]

It is a rough finish btw so just a heads up

[uneven cradle]

Anyway you don't need the new wootility to do what you're trying to do just select the key and change the actuation point

[static tendon]

It must've been bugging out on me but I refreshed a couple times and it still didn't work. Tried again about 5 minutes later and it seems to have detected the device

So what's the difference between these 2 links?
https://wootility.io/
https://v5.wootility.io/ - Is this the beta?

[uneven cradle]

Yes v5 is an in development build

[static tendon]

Is this the version with the banned SOCD option?

[uneven cradle]

It has it but so does the beta on v4

[static tendon]

Would people want to run the older version for stability purposes? I can't see a reason to go back to that version anymore

[uneven cradle]

Your mileage may vary on that one it's been stable for me

[stark osprey]

Were you looking specifically for the Cosmos edition Salvation case? If not, they're selling them cheap here:

https://www.ashkeebs.com/product/salvation-keyboard/

[static tendon]

Not exactly but assuming there's one special edition version, there may be some other special edition variants as well 🤔

But I apprecaite the link, this is far cheaper than I've seen before. 114 USD in B stock

I got my original salvation for 200$ with the original non-Wooting PCB and case brand new off Mechmarket but this was a while back before I started seeing more deals pop up. I got another one for a friend months later for 140$ but this ashkeebs site is selling for 114$ which is a steal

[stark osprey]

Yeah I was tempted to get a silver myself, but figured wait awhile and save up for messing around with 80HE lol

[static tendon]

I'm probably gonna pick up a black version but I don't think I want a B-Stock, I might wait for Novelkeys to bring down prices again

[static tendon]

But I also never saw that cosmos edition salvation. That's new to me

[stark osprey]

I saw the "Cosmos" edition before, but I dont think Wilbakeys used to call it that. I'm wondering if it's the same exact board and just renamed. Looks cool, but personally not into Cosmos

[static tendon]

I am Kosmos 🤯

My current salvation build 🥶

[stark osprey]

Haha I mean of course GMK Cosmos

[static tendon]

Has anyone here actually gotten a B-Stock Salvation case from ashkeebs? https://www.ashkeebs.com/product/salvation-keyboard/ . I was curious to see more photos of someone who may have received their case. I'd prefer a better condition one but for 114$, I am considering this as an option

[tropic urchin]

Big fan of the purple

[flat cobalt]

Yeah it was called Rough and Fabulous

They forced my hand to buy the key caps now at least

[stark osprey]

Yes there we go! They are the same exact ones as the "Cosmos" edition right, just renamed then?

[flat cobalt]

I don’t know if the original one has “cosmic cherry logo laser engraved”

But besides that it should all be the same

[stark osprey]

Oh gotcha, thanks for that!

[static tendon]

Yeah mine doesn't have that logo

[cold bloom]

bruh I want it so bad

but I just bought another keeb and keycaps and switches etc

I really don't wanna buy another pcb for it either

[flat cobalt]

I woke up and for some reason I decided to check the cosmos discord and the second I saw it instabought it lol

I’m still made I missed out on these

[idle flint]

Any Canadians know where I can get the Raw HE switches without having to pay egregious shipping and import fees? Its 3x the price with all those fees added

[cold bloom]

the timing for me is just kinda unfortunate but I also don't wanna pay for the full kit currently, maybe if it's still up next month

[buoyant remnant]

^ ditto for Australia

[cold bloom]

I was looking but I don't think so yet

[flat cobalt]

Fingers crossed

[cold bloom]

maybe Deskhero will get them eventually

[cold bloom]

hopefully since it's a pre-order it'll be up, I'll have to check

[flat cobalt]

Yeah I was gonna preorder the collectors for the new sonic game, but decided on the keyboard instead

[uneven cradle]

Cafege will have them eventually

[idle flint]

Hopefully. I already bought them on their official site but accidentally ordered the MX ones instead of the HE ones so now Im in for buying it again 😭

[buoyant remnant]

thanks

[flat cobalt]

Did you see this one

[cold bloom]

LOL no that's dope

[cold bloom]

W

[cold bloom]

https://www.etsy.com/ca/listing/1309392760/lugia-artisan-keycap-keycap-resin-keycap? ERM

I think I'm gonna get this

[uneven cradle]

This was a month ago so 1-2 months they should have them

[cold bloom]

bruh Geon's C stock is most people's A stock

it's wild

[flat cobalt]

That’s cute

[cold bloom]

I got it

the sale was too tempting

[flat cobalt]

Hell yeah send a pic once you get it

[rich phoenix]

Geons D or F stock is probs KBFans A stock

[cold bloom]

Will do, I saw a streamer with one once and needed it lol

[cold bloom]

real

[flat cobalt]

Did you get the cosmos keycap set or nah?

[polar girder]

it will be until oct 15th i think

yeah $170 is a hard pill to swallow lol

[stray tiger]

Are those the ones Alexotos got?

[cold bloom]

not yet but I am going to shortly

I just bought keykobo retro mixed lights r2

and I kinda want the dark alphas if I can find them

[flat cobalt]

Yeah I need to preorder them soon

[cold bloom]

I think so!

[cold bloom]

that's good to know!

I wish it was fkn 170$

CAD sucks

[stray tiger]

Ok so I have a dilemma. I can convert one of my 60% boards with daughter board USB into an HE board. I need to figure out which one.

[flat cobalt]

I want the Base and the Extension for sure

[cold bloom]

If I snag it I wanna get the base and the extras with the caps with a light port etc

[flat cobalt]

Yeah I wasn’t a big fan of the artist Salvun keycap they made with the little satellite

[cold bloom]

I'm not usually a huge artisan fan in general, I just have a HUGE soft sport for Lugia

it took me so fkn long to catch that pokemon it'll always be my fave lol

[jade storm]

Darkrai better

[cold bloom]

there's def some cooler/cooler looking pokemon but I love Lugia so much

Ho-oh is another fave of mine

[midnight relic]

Maybe it’s because I’m on mobile but the keycaps are color speckled slightly?

[cold bloom]

if you mean in the salvation photos I think they're just renders

the real keycaps are almost the same colour

gmk cosmos

[flat cobalt]

My favorite modern legendary

[flat cobalt]

I hate how the only artisans I wanted were like only up for 24 hours or 48

[stray tiger]

The nature of raffles

[flat cobalt]

[deft turtle]

Anyone here use spacebar foam

Kinda wanna buy some

[young lantern]

frog mini restock?

[glacial wind]

In all my foamy builds yeah

Makes the spacebar much closer to other keys in sound

[fluid ravine]

@stray tiger How's the frog build?

[flat cobalt]

Bro no way they just tagged teamed me with the Salvation case and the Tamagotchi keycaps @left depot

https://cannonkeys.com/cdn/shop/files/DSC08564_1.jpg?v=1726778220&width=5000

[deft turtle]

What’s the space bar size for wooting again

[stray tiger]

It's done for today. Just wanted to get a quick build up. I'll try and rebuild later but I'm seriously considering getting a new plate from Hype for one of the other cases I have with center mount USB and breaking the daughter board out of the PCB

[stray tiger]

6.25u

[deft turtle]

Thanks

[deft turtle]

What thickness do you use?

Think I’ll just end up buying the ones from kbd fans

[stray tiger]

Which color salvation you getting?

[glacial wind]

Mine only came in one thickness since it’s just from swagkeys locally here lol

[flat cobalt]

I did get the cosmos collab

[stray tiger]

Wait, you talking Salvation case or just the cap?

[deft turtle]

A thicker foam in spacebar would mean like a deeper sound right?

[flat cobalt]

The salvation but with the Rough and Fabulous finish

[stray tiger]

Oh nice that's 🔥 I didnt see that

[flat cobalt]

But they’re calling it the cosmos collab

[deft turtle]

Link to the salvation thing?

[flat cobalt]

https://salvun.com/products/salvation-x-cosmos

[deft turtle]

Thx bby

That’s a pretty case

[stray tiger]

I think I'm going to sell my Salvation actually, I never use it. Bit too purple for me

[flat cobalt]

Do the springs feel nice?

[flat cobalt]

Super pretty

[deft turtle]

Oh it’s a blank key cap set…..

I’m proficient with typing without looking

[flat cobalt]

Yeah the cosmos are black on black

[deft turtle]

But idk how people use that

[flat cobalt]

The salvation doesn’t come with the keycaps btw just the case

[deft turtle]

Ohhh it’s so faint

[stray tiger]

Like I said, I never use it. Doesn't match well color wise with my desk

[deft turtle]

Yeah I know I’m more interested in the key caps that were mentioned

[flat cobalt]

Ahhhh that’s fair, I have 2 tofu60s right now the meteorite gray and the acrylic.

[flat cobalt]

Ohhhhh

[deft turtle]

Goddam the artisan is 80 sgd

[flat cobalt]

They have a lot of collabs going, sadly a lot of them. Are raffles too :c

[stray tiger]

It's almost lilac instead of purple.

[flat cobalt]

Ohhhh that’s a pretty finish

[stray tiger]

Yeah my daughter loves it but I won't let her have it. She has an 80HE now

[deft turtle]

Damn we got children into keyboard now

🥺

That’s so sweet

[flat cobalt]

Awww and I’m sure you’d be able to sell it off pretty fast

[cold bloom]

I love that colour

I feel like I'd use that over the darker colour personally but it's so cool the colours the salvation comes/came in

I really like the avalanche and copper slag too

[molten prairie]

Finished up the base of my build, now time to move on to mods xP

Heres a lil sound test, comparing stock 60he+ to my version. At the end I also try out some spacebar foam, not really a fan of it atm.. I feel it makes it a bit too stiff, tried my best to show that off in the vid. If anyone has any tips or recommendations for mods lmk! (also ik im a super slow typer, im getting back into practicing T.T)

[fluid ravine]

pochi and me over here be like

[deft turtle]

I’ll buy it from you for 3 dolar

[chilly mural]

mmm, dream keycaps

[robust siren]

4 dola

[supple zenith]

hello im looking to change the case on my 60he (white and keeps the loop for the "take control") need recommendations

[flat cobalt]

I don’t think there’s a case that lets you keep the loop besides the alumaze I could be wrong though

https://wooting.io/product/alumaze60?Color=Just+Black

[supple zenith]

ah thanks

[flat cobalt]

The alumaze looks awesome in white btw super classy

[marble island]

If u lookin for an cheaper/more minimalistic option you can use the tofu 60 redux from Kbd fans

[flat cobalt]

They want the ability to keep the loop though

[marble island]

Oh hehe mb

[supple zenith]

tofu 60 redux was my other option

now im just stuck on keycaps

no idea where to look for those

[tropic urchin]

https://www.alexotos.com/keyboard-vendor-list/

[deft turtle]

@supple zenith yeah lots of people use that as a reference

Sorts stuff by region

[supple zenith]

ohhh ok thanks

[quartz spire]

Are the geon raw 60 same as the lekker 60

[inland saddle]

If you are in the US you have a lot of options EU is more limited

[supple zenith]

im in US looking for some white keycaps

[inland saddle]

What type and do you care about rgb also budget is a factor

[supple zenith]

prefered the keycaps that glow through ~50 usd my budget can move

[inland saddle]

Abs or pbt?

Also I would recommend pbt for white sets personally

[safe stag]

tighter and heavier than jades

[supple zenith]

no idea about the difference

ill go with your recommendation tho

[inland saddle]

Well ads tends to shine which shows more on white sets and it also might yellow over time that’s the main reason also if you like quality abs you would most likely go for the most common option of gmk which start at around 120$ usually

[supple zenith]

im not too picky with it

[supple zenith]

tho im not looking to pay too much for keycaps

[calm pulsar]

if you need shinethrough keycaps might get wooting ones

[inland saddle]

Well my pick would be Wuque Studio BoW or Cafe sets but for more budget you can go with Honey XDA I heard good things but haven’t tried it personally

[supple zenith]

thank man

[low flame]

imma get jades with a redux case with pompom keycaps with a tape mod

[left depot]

I keep looking for an EU store that has pre-orders for this too but i cant find it D;

[hardy night]

Has anybody used the l45v2 switches to update a stock 60he. I have a box from wooting and want to know if it’s a worthwhile first dip into modding my 60he?

Whilst I have it in pieces what else should I do?

[flat cobalt]

;3; idk if it’s only for America

Or if it’s because it’s Cannonkeys

It goes live on the 27th btw so maybe they’re still sorting stuff out

[left depot]

https://tenor.com/view/raiden-shogun-ei-genshin-impact-genshin-kawaii-anime-girl-gif-23576097

[random loom]

Someone gimme motivation for my assessment

Help

[random loom]

Is that raiden

[left depot]

i think so

i dont play

[vague stag]

lubers, is it really necessary to dissemble the whole keyboard to lube the switches? Have watched wootings own YT-video on lubing where it was recommended to do that in order to minimize anything damaging - but I guess what can be damaged is the switches itself, not the PCB. How do you do it?

When I lubed my L v1, i dissasembled the whole thing to be sure that the switches did not get damaged - but now I will switch to Geon Raws

[quartz spire]

Which geon raw switch should I get if I want it to be similar to the lekker 60

Anyone know?

[vague stag]

60g

[glacial wind]

geon raw he 60g

[quartz spire]

Okay thank u guys

[celest parrot]

Folks who got their 80Hes, how's the stabs performance. Do they need changing or they are good?

I already got my geon raws he and some space bar foam and bought some keycaps

[dull sequoia]

I did mod my Wooting Lekker Edition some months ago and wanted to give some feedback. And I totally forgot to do so.
I made some (crappy) recordings back then, which I put together in a video now. I think it still shows, that some minor work on a Wooting2HE (or Lekker) can have some drastic effects. Especially greasing stabs.
Not sure if anyone is interested, but anyways:
https://youtu.be/nBWWRZcZidc?si=Kr7SKitgbD0nrrhB

By the way, I also tried putting some foam between the case and the PCB but that didnt really change the sound at all.

[loud gull]

From what I've seen mostly with reviews and such. Stabilizers are good. But the spacebar could use a bit more lube.

[glacial wind]

they're just gateron stabs iirc, which are fine, just might need a better lube job

[celest parrot]

I'm totally new to keebs so lubing ain't my my cup of tea

But I'll give it a shot

[glacial wind]

there's some really good videos on basic stab lubing you can follow. Like the alexotos video gives you a solid run down

[celest parrot]

Yeah the one with the syringe

Good thing I work in a hospital

Will take some

[glacial wind]

best advice i can give is get the stabs tuned before you do everything else

if you put on all the switches, keycaps etc then find out your stabs need work it will suck to take it all apart again

[vague stag]

any advice?

[calm pulsar]

another order from geon🙏

[celest parrot]

Will take your advice to my heart tysm

[glacial wind]

i mean, I don't, but your milage may vary depending on how tight your switches fit

[celest parrot]

What kind of lube should I use

For the stabs

[dull sequoia]

Grease the stabs and lube the housing.

[glacial wind]

personal preference. Most use thicker greases that you'll find in the alexotos video for example, some prefer even thicker xht-bdz which is super thick, and some more modern stabs don't even use either (but this doesn't apply to your gateron stock ones anyway)

[celest parrot]

Will watch that video again then

[calm pulsar]

I had good results with krytox on the housings and either grease or bdz on wires

[keen geyser]

Damn...I ordered GEON Raws HE and today taxed came on top...I am paying more taxes+shipping than the actual switches now 😄

[dull sequoia]

I used Wootings package of lube&grease and got very good results. Grease the wire and lube the parts of the housing that cause friction

[calm pulsar]

yup that's the way to do it

[dull sequoia]

Results for the space bar of my Lekker edition were extreme tbh... But the Lekker had some really rattling stabs 😉

[wise sand]

actually good the wires are also somewhat balanced and tuned already

i still changed to knight stabs v2 tho because this is now my baby

[celest parrot]

why the knight v2?

[dull sequoia]

No idea where to get knight v2s in Europe :/

[glacial wind]

delta keys. But they sell out quick whenever they get new batch

[wise sand]

my stabs were rattling out of the box

[dire delta]

Candykeys, Deltakey

[celest parrot]

No I meant is it the best?

[wise sand]

knight v2 slight tuning doesnt have to be perfect then byebye ticking

[celest parrot]

I wannt take care of my baby too

[wise sand]

the best is tx ap clip ins i believe

but also the most expensive

[celest parrot]

Where to get those

Also are they compatible with the raw he

[glacial wind]

there isn't really a 'best' for stabs

[wise sand]

https://deltakeyco.com/en-au/products/tx-ap-stabilizers-rev-4

[glacial wind]

it's just that some stabs are easier to get working rattle free vs others, but almost all stabs can be tuned to be good

[celest parrot]

Like what is the best performance stabs

[glacial wind]

and in most cases just a proper good lube job fixes rattle for any stab

[glacial wind]

that isn't a thing

[celest parrot]

Ahh I see

[glacial wind]

it's like asking what is the best performance spoon

they're all spoons that work unless you buy a really weird shaped spoon

[celest parrot]

So what's the easiest stabs to tune

[wise sand]

my spoon is pretty fast

[dull sequoia]

Why clip in

[glacial wind]

knight v2. But it will cost you more time and effort to buy separate stabs vs just tuning your current stabs

[dire delta]

I had the best experience with stabies + geon wires

But they don't fit the wooting PCB

[glacial wind]

most of us swapping stabs just do it because we like a particular stab and can do it - not because it's better vs. just tuning the stock stabs with more lube

[wise sand]

easier for me

[celest parrot]

I get it tysm

[dire delta]

I do swap stabs because tuning bad stabs is a pain in the A***

[celest parrot]

I checked their website is on kit of knights v2 enough?

[dire delta]

Yep

[celest parrot]

I wanna try and If i fail I fail

[dire delta]

4x 2U and 1x 6.25U

[glacial wind]

i don't know why i ever bother telling anyone they don't need new stabs

everyone just buys new stabs anyway because they feel pressured by everyone saying they use x stab

[celest parrot]

It's just fomo

Hahaha pretty bad I admit it

[dull sequoia]

If you have grease+lube, try that first. Eliminated any rattle on my Lekker edition and my 60he

[celest parrot]

I'm still in the buying phase

[glacial wind]

yeah legit even just buying a syringe with lube in it like a ton of keyboard stores sell is more than enough to fix 9/10 stabs

[celest parrot]

Got some gmk keycaps and geon raws and space bar foam

[glacial wind]

you shove the end in, push a little lube in, give it a wiggle wiggle and that normally fixes most rattly stabs

[celest parrot]

Didn't buy the lube and grease yet

[dire delta]

Why do so many people buy spacebar foam?

[celest parrot]

Fomo

[dull sequoia]

Because they have no tape;)

[glacial wind]

because space bar sounds very different to other keys in a foamy build and people don't like it as much

[dull sequoia]

Oh one reason to get different stabs might be if you need long pole ones for ~3.5mm switches. However I didnt need that for my Lekker/60he. Some claim they need it

[tranquil lake]

i did tape mod 5 mins ago, everything is perfect, instead of "clacky" spacebar

[celest parrot]

Is the knight v2 lone pole?

[glacial wind]

knight come in both long pole and non long pole

[celest parrot]

Nice

[glacial wind]

you have to pick the right option, although if you buy long pole you can't install normal length switches so that's something to keep in mind for future

[celest parrot]

I have geon raws on the way

[dull sequoia]

Raw are 3.4 right?

[glacial wind]

yeah

[dull sequoia]

Well. As I said, I didnt have any issue with Jades (shorter as well) and my stock Lekker/60he stabs. However that also seems to depend on how stable the keycaps are

[glacial wind]

i've actually never seen that issue happen before either and almost all my switches are long pole

[dull sequoia]

At first my spacebar could tilt to the left&right but once I really pressed down the keycap with force, it was fastened enough and now it does not tilt anymore

I have seen some videos where the spacebar was problematic but no idea what keycaps they used

[dire delta]

I do use tweezers do push the stab stem into the spacebar on both sides

They won't bottom out on long pole switches

[dull sequoia]

Works as well I guess

[vague stag]

I've seen a video on that method, but cannot find it now. I persume I will need to do something similar with the G Raw (given the 3.4 travel distance).

Do you just force the stab stem onto the keycap with the tweezer?

[dire delta]

I just block the stab with tweezers and push down the keycap until it’s fully seated on the stabilizer

[vague stag]

guess u are doing that before you mount the pcb to the case?

[reef quiver]

I'm currently struggling to find keycaps that I like that are available in Europe :/

all the nice stuff that I want are only available in the US

it's so annoying

[stone flax]

https://www.alexotos.com/keyboard-vendor-list/

[tawdry tree]

You can do it fully assembled as well.

[rocky folio]

Hey someone got 15 o rings they would sell me on vinted ?

[crimson sky]

[flat cobalt]

Just buy them on AliExpress or something

[stone flax]

[rocky folio]

But what size and dimentions are recommended for the wooting ?

[tawdry tree]

It would be more expensive than getting them new.

[tawdry tree]

For what purpose exactly?

[flat cobalt]

Is it for the screws?

[tawdry tree]

Burger, keycap or friction.

[flat cobalt]

I use these for burger idk if they’re correct but they fit

[vague stag]

anyone with G raws experiencing issues with the wooting stock stabs, i.e. they are not properly seated or the key cap keeps popping out?=

[rocky folio]

Yeah, burger mount

[stone flax]

reduced travel

[rocky folio]

No

[stone flax]

get stem spacers or long pole stab or better keycaps

[rocky folio]

I have em and there is NO fucking issue

[stone flax]

👎

[stone flax]

You dont, people do

[rocky folio]

I do

[stone flax]

???

[stone flax]

@vague stag

[flat cobalt]

I use the ones I posted a pic of idk what other people use

[rocky folio]

Whatever

[rocky folio]

Thx

[flat cobalt]

[vague stag]

im going to try, if it does not work or gives me issue I might keep the L v1 for the stabs

[tawdry tree]

Those are a bit on the fat side, you use longer screws I presume?

[flat cobalt]

Wait yeah!

[flat cobalt]

Wait

[stone flax]

orrrrrr

[rocky folio]

Can you send me the link?

[stone flax]

@vague stag

Either works

But lekker v1 for stabs?

[tawdry tree]

Good to mention as well. I’d recommend longer screws for any O-Ring size above 1mm in thickness but still.

[tawdry tree]

Amazon probably has M2 x6mm screws as well.

[rocky folio]

On their yt, wooting are using stock screws

[tawdry tree]

With these O-Rings, you won’t be able to get away with using just stock screws.

[flat cobalt]

It should be these and these

[rocky folio]

Dude stop screenshotting

[flat cobalt]

Why lol

[rocky folio]

Can u just send the link xd ?

[flat cobalt]

Oh I’m dumb

[rocky folio]

No its fine

[flat cobalt]

https://a.co/d/h4R6wM6

https://a.co/d/7KqoZqf

[rocky folio]

Why 2 ?

[flat cobalt]

The first are for the burger and the 2nd ones are just for the back

[rocky folio]

The back ?

I changed the case

[flat cobalt]

Yeah

[rocky folio]

What is the back ?

[vague stag]

what is considered long in this case? 😄

[flat cobalt]

The back of the pcb

Or front I don’t even remember anymore just get the first ones

[tawdry tree]

You use different screws?

[rocky folio]

Wym do i not neee only like 5 screws ?

[flat cobalt]

Yeh!

[tawdry tree]

WHY?! 😅

[rocky folio]

Can i get the link for the i rings as well ?

[flat cobalt]

https://a.co/d/7LYSFKa

[flat cobalt]

Just a different quality

[rocky folio]

Thx but where do i put the other screws ? I dont get it

[flat cobalt]

I changed the ones on the back

[rocky folio]

5 holes in the pcb

Oh but why changing them

[tawdry tree]

You don’t need different screws for the front/back.

[rocky folio]

Did you also put o rings in there ?

There is already silicon

[flat cobalt]

Just get the first screws forget the 2nd ones

[rocky folio]

Thx

[flat cobalt]

It’s something I did that’s extra

Like not needed at all

[rocky folio]

Thx

Perfect

[flat cobalt]

Wait

[rocky folio]

Hm ?

[flat cobalt]

Listen to what @tawdry tree recommends too though

[rocky folio]

Yeah yeah

[stone flax]

they will specify

id say long poles stabs become optional below 3.7 and suggestible around 3.4/3.5

[tawdry tree]

If those screws aren’t available in your region, get these: https://www.amazon.com/dp/B07YCCXVDF/

[vague stag]

thanks!

[rocky folio]

Thx a lot

[tawdry tree]

👍

[vague stag]

https://www.maxgaming.se/sv/stabilizers/ap-tx-stabilizer-12mm-long-pole-svart ?

[stone flax]

1.2mm

do these come with stab shims?

i dont think so

[tawdry tree]

You need 1.6.

[stone flax]

look for one with 1.6

[vague stag]

thanks!

[robust siren]

be mindful that there are issues and some tx ap stabs might not fit

#🪛│modding_faq message

[vague stag]

oooh, thank you!

[tawdry tree]

With the release of the 80HE, the warning in #🪛│modding_faq needs to specify the 60HE+ as the issue was resolved in the 80HE.

[vague stag]

ordered yesterday, and confirmed shipping today - can it really be true that it takes a MONTH to deliver when ordering from ALI to Sweden?

[calm pulsar]

the estimated date is usually the worst case, so likely it will be faster

[untold wigeon]

Go me!

[calm pulsar]

wow is that some sort reward or medal?

[untold wigeon]

4 years sobriety today.

[candid wolf]

Hello can you confirm me that it is right for h60

Long pole?!

[calm pulsar]

awesome, go you!

[glacial wind]

yeah that's fine if you're using raw he switches, but not if you're using lekker v2

[untold wigeon]

Thanks buddy!

[candid wolf]

where can i find in europe? Raw he ?

Thx

[glacial wind]

delta key when they restock or have to order from aliexpress (but you might get hit by taxes on the way in if your country charges taxes)

https://www.aliexpress.com/item/1005007782574456.html
https://deltakeyco.com/products/geon-raw-he-switch

[dire delta]

https://www.aliexpress.com/item/1005007782574456.html

[stray tiger]

I don't think I've been unable to tune my stabs well enough that I needed new ones in a few years now

[candid wolf]

Love

X you is best 40 or 50? Big hands

Now I have Leakers 45 v1

[tawdry tree]

The Leakers!!

[tawdry tree]

I’d go for the 50g

[candid wolf]

Thx 😂

[stone flax]

dkc

[midnight relic]

congrats!

[tropic urchin]

@calm pulsar mechmarket delivered the Lazzies🔥

[calm pulsar]

whats that?

[tropic urchin]

Lazurites arrived

[calm pulsar]

ahh nice

[tropic urchin]

mechmarket pulled thru fr

[tough wave]

I am now a geon raw believer. Ordered the 50g 😎

Also, for the switches being compatible, this also means that it's accuracy to the 0.1mm would be correct using wootility?

And would the wootility still show 4.0mm for a switch that travels only 3.6mm?

[marsh saffron]

It still shows 4.0

It works off a percentage rather than physical actuation

4.0 would basically = switch fully depressed

[untold wigeon]

Thank you!

[tough wave]

Hmm okay. So setting it to 0.5mm actuation would be more like .. 0.45mm?

[calm pulsar]

why is it depressed, send it to therapy

[marsh saffron]

Yeah more like this

Idk how the actuations actually line up

After getting my dashes though I ended up raising my actuation point to 0.3 over 0.1

Because 0.1 was incredibly low

[tough wave]

Gotcha. Is the switch pre-calibration for the next version of wootility still in the works? Like it wasn't an abandoned idea or anything

[robust siren]

welcome to the community! our lord geon will be pleased by your desision and may he bless you for years to come!

[tough wave]

I'm reading it from the modding faq

[marsh saffron]

Yes, but it's just not available in the v5 alpha yet

Probably comes out during beta or full release

[tough wave]

Gotcha. Sounds look a cool idea. But otherwise yeah, once I get the switches I'll see how they run with the actuation points 🙏🏻 so excited to replace my Lekker v1s on my 60he, and then eventually on my 80he

[robust siren]

also the raw he are only 3.4mm travel so it might be a little off from what you want

[marsh saffron]

You may just need to adjust rt values and actuation points to account for this

[tough wave]

👍

[robust siren]

its confirmed that they will add an option in wootility in the future to select what switches you have for proper mm display on those sliders

[marsh saffron]

Did that for my dashes and it was fine

[marsh saffron]

Soon™

[robust siren]

soon...

[tough wave]

Thanks for the info! 🙏🏻Lol it's hard to search for these answers because the search function isn't super dynamic

But I definitely didn't have to look far to get recc'd some geons lol

Insane for the price too compared to jades

[robust siren]

Bless Geon all that that the touches!

sno is the lead advocate for Geon

he will also be pleased by your wise desision

[calm pulsar]

made another order from geon's local korean store today

[tough wave]

Oh also, do I need to do anything to my stabilizers for the geons? Or is it just easy switch n play?

Was reading about the long pole stabilizer issue. Dunno if that applies

[robust siren]

as long as your keycaps are good quality you dont need stab replacements

[tawdry tree]

Total travel distance (3.5mm) divided by 40 steps = 0.0875mm per mm shown in Wootility. So 0.5mm in Wootility would be 0.44mm in reality. 👍

[marsh saffron]

If you have keycaps with bad tolerances you may need to swap to long pole stabs

[robust siren]

thats specific to only the 60HE with TX AP Stabilizers

it was fixed with the 80he

[random loom]

Hello chat

[tough wave]

Gotcha

[blissful lintel]

Shoudl I film lekkers or no

[calm pulsar]

v1.5s and v2s no

[tough wave]

If I do run into that issue, would these spacers help? Or do they serve a different function?

[tawdry tree]

The potential long pole issue isn’t fixed in the 80HE, just stabilizer hole size so stabilizers like TX APs and Staebies will fit through the 80HE’s plate perfectly but not through the 60HE’s plate.

[blissful lintel]

Thank you fren

[calm pulsar]

np np👍
films are helpful on switches that have bad tolerances (like lekker v1s), but if you have a good switch then films won't really help or even mess with your switch

[random loom]

What even are those

[calm pulsar]

yeah these are designed for the purpose of making your stabs act like they're long pole

[tawdry tree]

Yup, you put them over your stab stems, then put the keycap on top.

[tough wave]

Oh sweet. Lol I threw them into my cart Incase because it looked like i might need them.

[glacial wind]

another loyal geon follower to the flock

[blissful lintel]

Haven’t built a Hall effect keeb yet and was rummaging around in my drawer and found a whole bunch of deskkeys films

[calm pulsar]

glory to Geon and all that he touches

[random loom]

Agreed

I don’t even have a Hall effect keyboard yet but I love it

The switches itself are enough

[ionic breach]

[calm pulsar]

well you can just see if the switch housings move around if you try to move them, if yes then you can try the films, other than that I'd say it's not worth the hassle

[winged turtle]

What kind of spacebar foam do you guys reccomend?

[ionic breach]

ngl shorter travel is nicer than i thought

[ionic breach]

anything you have

[tough wave]

I love how often this is thrown around. If someone peered into a window and saw this, they might actually think we are cultists

[random loom]

I just got some at Ali express

[eager idol]

Finally math is going to be useful for me

[robust siren]

cut up the one that comes in the stock wooting 60he and shove that shi all in the spacebar 💯

[eager idol]

I meant this one

[robust siren]

(its what i did)

[blissful lintel]

Is venom pcb out to international yet o no

[tawdry tree]

Haha, well, the difference is very little so it shouldn’t matter. 😅😂

[calm pulsar]

only the TKL one currently

[robust siren]

@winged turtle

[calm pulsar]

this reminds me I had some kbdfans spacebar foam, might try it rn

[winged turtle]

https://tenor.com/view/dwayne-the-rock-johnson-dwayne-johnson-dwayne-yes-yes-yes-yes-gif-23180639

[robust siren]

its a bonus too, theres a sticky side on the foams

[eager idol]

Saldy I can't but a Wooting because it's expensive asf

[robust siren]

dont need to worry about it falling out

[eager idol]

But I do want to work on Wooting one day in the customer service

[tawdry tree]

Could get one second hand perhaps? Prices are quite a bit lower and still come with the warranty.

[eager idol]

I already buyed another one cheaper but when the new Wooting comes out and if the reviews are good then I will buy one

And mod it

Because I always wanted to mod a 80HE

[random loom]

Wdym new wooting

[eager idol]

The one after the 80HE

[serene agate]

Guys, any blank keycap (without legend) with transparent bottom? Like this

[random loom]

Hm

[stray tiger]

@calm pulsar check dm

[random loom]

Guys any predictions

[eager idol]

It won't be out for at least 2 years, which will be a lot of time to gather money

[calm pulsar]

lol nvm this foam doesnt fit into gmk spacebars and probably doesnt help much anyways

[fluid ravine]

Brung my board to school

[wise sand]

If you can fill those trenches with foam you will get a fuller sound

[robust siren]

i find it to help a bunch when i shoved foam in my spacebar

[wise sand]

although you will block the rgb

[fluid ravine]

Peeps using it rn lol

[robust siren]

the rgb looks fine

[wise sand]

these trenches, this and the plate being pushed down by the top case altered the spacebar sound imo, if you take the top case off youll hear what the spacebar should sound like

[robust siren]

i find that those leds arent as bright/more showing because there isnt a switch diffuser on them

[calm pulsar]

hmm that's interesting to try

[random hull]

oh, so when i do buy the geons, i need spacers for the same amount of switches that i am to use? i didnt know about that

[calm pulsar]

all good, I don't really use it

only on caps lock

[random hull]

alright thanks

[robust siren]

god i dont think i can ever get used to the weight of the tofu60+brass weight

its so heavy

i love it

[calm pulsar]

found it, sent you a dm 😄

[random loom]

guys is it just me or modding a th80 for someone is like life and death situation

[flat cobalt]

I want my salvation case already

@cold bloom this Whale artisan is looking really cool right now

[midnight relic]

melena

[flat cobalt]

Whaa

[midnight relic]

first thing that came to mind when I saw the keycap

[flat cobalt]

Ohhhhhhh lol

[stray tiger]

My friend who makes the tree artisans I collect is doing a cosmos collab too and he is using bits of real opal in his for the stars

Here is what the unfinished/unpolished caps might look like

[flat cobalt]

Wowowow I might wait for this one instead

[flat cobalt]

Are you gonna pick one up ?

[tropic urchin]

If they have a white variant I’d buy that so fast

Real opal is crazy

Very cool cap

[stray tiger]

I'll entere the raffle. Im not guaranteed anything just because he is a friend lol

[stray tiger]

DO NOT CLICK THIS LINK - https://keycapquarry.com/

The owner is another local friend of mine. His cosmos collab sold out in in a very short time

[flat cobalt]

Ohhhh!

[chilly mural]

Damn

[tropic urchin]

Im smooth brained, I can’t read 💀

#clicking

[chilly mural]

Some of them are actually reasonably priced, thought it'll be almost all $150+

[stray tiger]

https://www.instagram.com/p/DAMKYmpvScI/?img_index=1

https://www.instagram.com/p/C_5_q2uPMD1/

[tropic urchin]

Okay those caps are fire

[elfin garnet]

Spending money on yourself, loved ones and keyboards are much better. Happy for you and congrats!

[tropic urchin]

I’ve always wanted more gemstone artisans and it looks like he’s the guy

[flat cobalt]

Congrats!

[untold wigeon]

Haha! Indeed! Thanks buddy

[untold wigeon]

Thank you so much!

[tropic urchin]

@stray tiger can we talk about this tho, this is incredible

Oh he has a lazurite cap this is so joever

[polar girder]

lol I already bought two artisans for cosmos. I think I’m done.

Won my first and only artisan raffle.

[chilly mural]

I want my first artisan to be blessed with holy water

[tropic urchin]

As a space enjoyer I need some of these caps

I’m gonna wait a couple months and forget about my other purchases in the mean time

[polar girder]

I’m still trying to see if I can get lucky and buy PBS BoB and Cosmos at same time from Cannonkeys

Haven’t even bought Cosmos yet

[next thunder]

Anyone know the size of lekker springs in diameter?

[unique jetty]

Any and all recommendations for sets that look good with PCR ghost?

[tropic urchin]

I’d try looking for transparent caps, there was one that the thockfather shared that looks incredible

[tropic urchin]

#🔧│keyboard_modding message

[vague stag]

Is this really necessary for all switches or just spacebar?

[flat cobalt]

Which ones did you get

[polar girder]

Those

[tawdry tree]

Both are sick asf but the last one especially

[polar girder]

I’m pretty pumped

And the malice one the chain is legit

And moveable

Pretty crazy

[tawdry tree]

Yeah

[ionic breach]

its a clean ass chain too

[tawdry tree]

a cool concept

haven’t seen anything like it before

[ionic breach]

wait i just realised you need to hurt urself

the thorn is straight up

[tawdry tree]

bloody fingers but who cares when it looks like that

[marsh saffron]

Is this the white one?

If so pbtfans x-ray 🔥

[lean condor]

hello, any suggestions on good doubleshot pbt keycaps ? price ain't bothering me but waiting is and every set i looked either baited me into thinking it was PBT hmm hmm looking at you PBTfans coolest keycaps or ain't in stock

[candid wolf]

Hi sir why I can’t use lekers? And can use only geon?

[ionic breach]

because you chosen the long pole version

which is for switches for a shorter travel like the geon raws at 3.4mm

if you want to use lekkers (4.0mm) , get the normal knight

[candid wolf]

thx sir

[analog mulch]

guys is there any cool arm rest that matches with 60he?

[stray tiger]

Tons of good PBT keycaps out there. If you dont see a PBTFans setr in-stock you like, try major sites like NovelKeys, CannonKeys, Omnitype, etc (if youre in the US)

[ionic breach]

ah i think he means pbtfans are usually abs

and he is baited into thinking they are pbt

[stray tiger]

Also, Omnitype is running their last happy hour of the year (or ever) sale. Just started 28min ago - https://omnitype.com/collections/happy-hour

[stray tiger]

Typically just the transparent ones, at least with the older sets

[lean condor]

yeessss i mean not every set is ABS but cmonnnnn their coolest set is not PBT

[ionic breach]

👀 which one is that?

[analog mulch]

pbt is quieter?

[stray tiger]

Thicker PBT is usually more muted

[ionic breach]

a lot of the new pbtfans seem to be abs tho

[stray tiger]

Do they have transparent keycaps in those sets?

[lean condor]

i found a guy that had brand new Ryokan and i love the look but they are ABS

[ionic breach]

the one that i got is count dracula

[flat cobalt]

Hell yeah I love that flail mace one

[ionic breach]

which is abs without transparent

[lean condor]

these one too they look good

[ionic breach]

untamed doesnt have transparent either i think

[flat cobalt]

Tuzi my weakness nooooooo

[stray tiger]

Yeah looks good!

[ionic breach]

its only for the colour heavy ones it seems like

[stray tiger]

If youre in the US thats a great price!

[flat cobalt]

The tamagotchi keycaps come out tomorrow though :c

[ionic breach]

as in vibrant colours

[fluid ravine]

So like
Gave my teacher my keeb to try
Yknow what she said
"It sounds creamy omg 😱! "

[ionic breach]

[flat cobalt]

https://cannonkeys.com/products/tamagotchi

[stray tiger]

Not dreamy? boo

[fluid ravine]

LMAO

[random loom]

Dreamy > every sound profile

[fluid ravine]

The sound profile we dream of that we can never achieve

[untold wigeon]

50 points to anyone who can guess what I was going for here.

[unique jetty]

No it’s the black frosted one

[stone elbow]

Is that one of those flying ships the enemies use in super mario?

[untold wigeon]

No

[stone elbow]

Looks close lol

[untold wigeon]

lol kinda

[polar girder]

Joker

I think you misspelled 50 bucks

[fluid ravine]

[untold wigeon]

https://tenor.com/view/liar-liar-jim-carrey-fletcher-reed-liar-liar-ding-ding-ding-ding-gif-16511216

[random loom]

Nah 1 switch can achieve that

[random hull]

Hmm, my friend told me that requiring the geon spacer stems would be keycap specific (?) so if I were to be using a set of cherry profile caps, would anyone know if the set of spacers is essential purchase once I get an order in for the geon raws.

[sleek wagon]

WHY IS MY WHITE RGB BLUE

[tropic urchin]

what switch are you using

[uneven cradle]

Not needed for HE switches

[sleek wagon]

Jade pro

[tropic urchin]

the housing is why

since its like a blueish green color it'll show up in your RGB

[random hull]

appreciate the reply thanks

[sleek wagon]

Raw he here I come

[barren wasp]

How are they

[barren wasp]

How are the jade pros I’m wondering

[sleek wagon]

lol they sound good, but the white rgb being blue is enough to make me buy the raw he's

Typing feels great and they really improved the stem wobble

[barren wasp]

I see thanks I’ll also probably get jades pro

[tropic urchin]

They're an improvement over the OG Jades, if you like how those sound you should like those switches as well since they're the same price

[barren wasp]

Don’t use white often

[tropic urchin]

since it has a colored housing it'll dilute your RGB a little bit and give you more green/blue

[sleek wagon]

White is the only option I use, hate the gamer red and rainbow leds everyone uses lol

[tropic urchin]

RAW isn't exactly transparent either, but they should be more neutral

[sleek wagon]

Not a colored housing, will be an improvement

[tropic urchin]

true

[random loom]

Where u buying it

[tropic urchin]

looks like divinikey since they use 18 sets

[sleek wagon]

Divinikey

[barren wasp]

@sleek wagon can you send a sound test for jade pros

[tropic urchin]

https://www.youtube.com/watch?v=Ju4kxa8C0_c&t

[sleek wagon]

I'm at work rn I'll try to remember for when I get off

[analog mulch]

will wootin sell jade pro?

[tropic urchin]

They're working on getting the RAWs on the store front. They're the same price so just order it off gateron if you're interested in them

Not sure on their timeline

[analog mulch]

i was waiting for the end of thee month to get the geon raw he but since you're saying ill probably wait a bit more

[tropic urchin]

If you're set on the RAWs id just get them now

[uneven cradle]

Yeah timeline for them being on the store could be a while

[analog mulch]

ah ok, thank you, ill get them then

[tropic urchin]

No guarantees for any timelines since the pros are relatively new

[random hull]

Jade Max/Pro probably wont be found on a EU seller anytime soon right

[robust siren]

check amazon

it might not be in stock tho

[stone flax]

geon raws he

[robust siren]

also this is the answer

[random hull]

true..

[uneven rapids]

still no geon raw he sound test on the 80he other than the wooting vid?

[random loom]

dont think so

I tried asking for people who have sound tests for it

[uneven cradle]

There are sound tests in here you just have to look for em #🔧│keyboard_modding message

[stray tiger]

Ive got geon raws on my 80he and Ive posted a few videos

Here are 2 stock RAW's on 80HE

[random loom]

AM IN HEAVEN

[uneven cradle]

Here's my sound test 👀

[analog mulch]

that space bar... chefs kiss

[stone flax]

i want the whole triangle

how do i make my keyboard sound triangly

[midnight relic]

use blackberry as input device

[calm pulsar]

creamy thocky marbly is crazy

[chilly mural]

Im on the clack side, maybe a bit creamy

[marsh saffron]

Idk what mine is

[polar girder]

Where’s dreamy!!??

[stray tiger]

@stone flax just the guy I need to talk to

[stray tiger]

Thats the whole triangle

[polar girder]

Faxxxxx

[tawdry tree]

thocky poppy marbly clacky and creamy, omg

[stone flax]

wdym

?

[tawdry tree]

Ain’t it supposed to follow the arrow? Starting with 10 on the right and ending with 100 on the left. 🥴

pop = 100% clack confirmed

[stray tiger]

I've got 3 60% boards that I can mount the venom PCB in, but have to chose one since a plate has to be made. Choices are:

1. Budget - Midway60
2. Mid - Iron160
3. Top - Derivative

What are your thoughts?

Im leaning towards the Midway60 since its just collecting dust but can support a proper o-ring mount

[stone flax]

oh waitt

U got all 3

[stray tiger]

Yes

[stone flax]

I thought u were thinking of getting one

Well then

Midway or derivative

[stray tiger]

Derivative would be interesting just because of the multiple mounting options to test out, but the midway is budget enough that I wouldnt care if it didnt turn out great.

[stone flax]

same thought, derivative could be peak tho

[silk hound]

do derivative

[stone flax]

hii bro

[tropic urchin]

Heavenly marble

[stray tiger]

Honestly, probably would be. I'll probably do the Midway just for proof of concept and then order a second PCB if it turns out great

[silk hound]

hi broskiii

[stone flax]

oh a second pcb makes that the play

[silk hound]

hi tirade

[stray tiger]

[stone flax]

is it wrong call him thockfather

[stray tiger]

Only if youre younger than me

[stone flax]

riv

I heard u got a sho

is that true???

[stray tiger]

https://tenor.com/view/last-dragon-gif-22691234

[sleek wagon]

Should I go silicone or foam pad

[silk hound]

yeah it's coming to me in a week

[stone flax]

fuck man

[stray tiger]

https://tenor.com/view/preference-glarses-mx-brown-cherry-mx-brown-keyboard-gif-21044520

[stone flax]

what was the listing and what did u cop it for?

@silk hound

[sleek wagon]

Im a sheep. Now silicone or foam pad

[stray tiger]

Neither

[sleek wagon]

Clarify

[silk hound]

$315 shipped

[stray tiger]

You dont have to use any dampening material

[stone flax]

im reporting you

for stealing

[sleek wagon]

Between the plate and pcb?

[silk hound]

https://tenor.com/view/you-right-gif-26385638

[stray tiger]

[sleek wagon]

How's that affect the sound?

Deadass I didn't know you could just not use anything lmao

[stone flax]

thats the thing.. it doesnt

[silk hound]

real he gave me a deal - comes with 2014 pro 2

[stone flax]

using dampening materials is literally what affects and adulterates the sound

[stone flax]

wtf

did they steal it?

[stone flax]

Less dampening is literally the rawer the sound gets

[silk hound]

no sir - I just know how to negotiate - og listing was $400

[stone flax]

me tooo hehe

Got the frog down from 315 to 265

😭

im not as good as you

[tropic urchin]

@stray tiger unrelated, if I bought one of those gemstone artisan caps would I need to use a heavier spring (100g)

[silk hound]

mate that is pretty good to me! Full built with 60he too

[stray tiger]

Would depend on the weight of the cap. You can ask the maker, he is super responsive.

[tropic urchin]

I might see if he can do a lazurite custom, that would go hard

Since the RAMA artisan is chalked

[pulsar patio]

Durock v3 pcs mount VS Designer Studio pcb mount v2? What should i get? Cant get knight v2's in my country

With wooting pc plate

[tawdry tree]

Designer Studio’s, Durock V3s are wider and don’t fit well.

[stone flax]

tell me im goat

istg i put on the designer studio train

[tawdry tree]

ur 🐐

[stone flax]

[sleek wagon]

So no pad is the move

[tawdry tree]

u did. I didn’t know about em before u said it

didn’t even know Durock straight up CPed designer’s design.

🫤

[stone flax]

happens a lot tho

throwback…..

[tawdry tree]

😂😂

[vague stag]

Does a simple o-ring work as a stem spacer?