🔧│keyboard_modding

[calm pulsar]

true
someone has to attempt soldering a daughterboard to wooting pcb

[cyan zodiac]

layout won't work anyways

[uneven cradle]

yeah I still want one though

[calm pulsar]

no WK?

[cyan zodiac]

you know who to come to

[cyan zodiac]

7u sb

[stark osprey]

According to the Geon page they will have WK, but yeah daughterboard... Not a stranger to soldering, but havent done it for that.

[cyan zodiac]

but isn't f2 60 tsangan?

[stark osprey]

Good question trying to find out

[cyan zodiac]

pretty sure it is

i mean ig if they offer wk then it fine

[calm pulsar]

might need a custom plate even if you can solder the daughterboard

[tawdry tree]

Woot has merch? 😮

[left depot]

[fast jay]

are they compatible with the wooting 60he?

[uneven cradle]

Yep

[fast jay]

good

[fast jay]

are they better than the l45/l60?

[uneven cradle]

They have tighter tolerances then the lekker v1s. I have not tried the updated lekkers, but the Raw HE are more clacky sounding for sure lots of people in this channel seem to enjoy them a lot

[solar tundra]

Should i Bag Lube the Springs or hand?

[uneven cradle]

Bag lubing is faster, although pulling the springs apart again can be a bit of a mission

[calm pulsar]

I wonder if oil leaking through open bottoms is a myth or not

[solar tundra]

What you recomend?

Do i Hand Lube them with 205g0?

[uneven cradle]

Be fine either way the lube is non-conductive

[uneven cradle]

That's what I did

[sweet oak]

Oh hey, welcome to the orange crew hopper

[uneven cradle]

Oh hey pal

Gratz to you too

[sweet oak]

[solar tundra]

Handlube the whole Spring or only the edges?

[uneven cradle]

Just the ends of the spring

[solar tundra]

I might gonna do this too

Like if i Lube the Springs i lube them with love

[uneven cradle]

Recommend playing around with different amounts of lube and trying them out before lubing all of them

[languid forge]

YO

does anyone know how a brass weight would affect the sound of my keyboard?

more thocky, more clacky, creamier?

[old swallow]

@harsh dove i know you probably dont have anything to do with it. But if you dont rig the giveaway so i get the buckethat or slides. Then were throwing hands 👊👊.

Jk jk, unless?

[sweet oak]

Cal obviously gets the bucket hat

[copper glade]

yes but i finally got them sounding good, so imma just leave them lol

[untold wigeon]

@uneven cradle congratulations on your new role!

[summer patrol]

Hi guys, finally got my 60he and its a breeze, i'm looking into buying a keycap set with a color scheme like this one : https://candykeys.com/product/pbtfans-bank-account/base40s-bundle, does anyone have a similar set (orange/green/white) to link ? Also, i have an azerty (baguette) layout, i'm guessing that its not a problem with full kits as long as the bundled keys size fit

[cedar gate]

Most people usually do bag lube

If you have 105g0 then fr sure bag lube

If you don't want to buy it then hand lube is OK to

[dawn stag]

do raw hes come prelubed

[magic forge]

hey guys i just got alumaze 60 and also changed the switches to gateron jades, anyone else done the same?

the sound doesnt sound more "jade" like... I've been using the same switches on a different board and the thoc is way heavier
anyone else here using alumaze 60 + jades?

[untold wigeon]

Yes

[stray tiger]

Which board did you also use the Gateron Jades in?

[calm pulsar]

finished lubing my jade knights, time to do stabs😭

[languid forge]

arcsyko

I literally just watched ur video

on yt

2 seconds ago

wtf

ANYWAYS

[calm pulsar]

lul

old one

[fluid ravine]

Morning modders!

[languid forge]

Does anyone know what this keycap set is

[fluid ravine]

Yipeee a party role!

[calm pulsar]

you're blue!

[languid forge]

Gm

[fluid ravine]

Am bluuu!!!!

[calm pulsar]

bro became gmk striker

[fluid ravine]

[left depot]

party guests

[cedar gate]

Most switches come prelubed whether or not it's enough is the question I think raw lube is good

[stray tiger]

https://tenor.com/view/drunk-dancing-drunk-dancing-gif-14722533

[fluid ravine]

Goated giveaway lowkey

I want the merch!

[cedar gate]

How?!

[languid forge]

maybe someones a really good finder

[fluid ravine]

Hai Raquel!

[languid forge]

idek

google images didnt help

[left depot]

[fluid ravine]

Dude I'd be the most happy if I can get that bucket hat

Id be screaming

[stray tiger]

Don't think for a second Im not also trying to win that swag haha.

[fluid ravine]

[cedar gate]

What bucket hat?

[fluid ravine]

I WANT THAT DRIPPPPP

Frik the keyboredsss
I WANT TAT

[left depot]

[cedar gate]

Lmao what

Wooting dropped take control merch

[fluid ravine]

Maaan this better

It got slippers

[quiet bay]

Finally got a colored role huh

[fluid ravine]

LOL AM BLUUU

[quiet bay]

FITS U NGL

[fluid ravine]

[quiet bay]

just like how mine fits my pochita

[fluid ravine]

this kinda sus

[fluid ravine]

[quiet bay]

nothings wrong with it

[fluid ravine]

Mbmb

Alr brb chaaaaat

[quiet bay]

if i cant use the smol emoji then I will use big emoji

[fluid ravine]

[cedar gate]

Do they have rapid trigger?🤣

[fluid ravine]

What do you want from the giveaway @quiet bay

[quiet bay]

the 80he, 60he, or 200 dollar credit

200 dollar credit is basically the same as a normal 80he fr

[fluid ravine]

[quiet bay]

maybe the drip too lel

[broken cape]

will the drip be available in the shop too at some point?

[fluid ravine]

Hmmm ima need a updates PCB lowkey

I'd happy with the 60HE+ as well

So I could sell mine

[quiet bay]

i dont mind having another UwU to play 4k lel

[fluid ravine]

My dad just slammed a heavy ass generator box on my finger

[broken cape]

:D

[fluid ravine]

Taping finga

[fluid ravine]

Lul

[left depot]

[untold wigeon]

https://tenor.com/view/blue-fire-elmo-anarchy-blues-gif-25903479

@fluid ravine u team blue. lol.

Morning @left depot

[fluid ravine]

@left depot is the x4 meaning 1 per person (even though it logically makes sense)

[quiet bay]

1 per person

[left depot]

no 4x 50

[neon tiger]

Hi guys, is it very good to hand lube your switches ? Thank you

[flat cobalt]

[left depot]

https://tenor.com/view/hinata-shouyou-saying-japan-gif-25791145

[velvet junco]

Tofu60 red case comes in a few days. That’ll be enough modding till I’m ready for the jades

[fluid ravine]

The two weirdo quick attacks!

[left depot]

[cyan zodiac]

[elfin garnet]

[cedar gate]

Rapid trigger slippers

[trail coral]

what is the least wobble hall effect switch on the market now

[elfin garnet]

Raw HE

[solar tundra]

I got WS Dash and they dont wobble for me tho

[harsh dove]

I’d say RAW HE have considerably less wobble than Jades/WS Dashes imo but wobble doesn’t necessarily bother everyone the same way

[trail coral]

id like to hvae an endgame keyboard that doesnt wobble so I am researching about it haha

[exotic inlet]

How are they sound wise?

[cold bloom]

@uneven cradle f2-60 stream last night

[harsh dove]

I feel like the Jades are slightly louder/clackier and the RAW HE is like a deeper clack

[fluid ravine]

thack :D

[harsh dove]

And raw he have a cleaner sound imo because they have less chatter due to the reduced wobble/tighter tolerances

[fluid ravine]

cuh rack

[fleet summit]

Anyone tried Geon Raws yet?

[exotic inlet]

Nice to know, thanks!

[fluid ravine]

Like a handful of us have

[fleet summit]

How is it compared to jades and raptors

[fluid ravine]

The pitch is similar to jades but the top out of the RAW's are cleaner due to the tighter stem wobble like CAM said. Raptor's a whole different story, RAW's have a semi closed bottom out housing with a travel distance of 3.4mm as raptors have a full 4mm. The magnets on the raptors are much stronger than the requirement so you may need to adjust. Sound wise RAW's have a completely different sound but the raptors are similar to the lekkers.

[fleet summit]

Thank you

[fluid ravine]

Np

[flat cobalt]

The big brain

[fluid ravine]

You should see me in my yt comments

i wrote a stupid amount of shit for like one or two replies

[flat cobalt]

is your channel the same username as here?

[fluid ravine]

yeeee

[flat cobalt]

[exotic inlet]

Are those raw he?

[devout torrent]

8008 so good

soudns great too

[fluid ravine]

yessir

[fluid ravine]

zanks

I need to record another sound test of my board, the one i sent is with silicone pad which i dont mainly use

[fluid ravine]

BooBs

[exotic inlet]

Do it for science!

[cold bloom]

[fluid ravine]

#1261492527433781320 message

Already done

i've done the PE foam mod on it as well

Loved the spacebar

Sounded like a squeaky clown mallet

[exotic inlet]

Thanks, sounds like quieter

[tropic urchin]

If I wanted to try and create a franken build for my 80HE (Jade housing + Raw stem) is that feasible or am I better off just using stock Jades and not overcomplicating it

[untold wigeon]

I own both. This is the correct answer

[fluid ravine]

I own one, This is the correct answer

[harsh dove]

You’re not going to get less wobble with Jade housing and raw he stem

[tawdry tree]

bucket hat and flip flops go hard as fuck holyyyyy

[fluid ravine]

Fr, i prob want that the most over the boards

I'd be down for the credits as well but damn

Merch>>>

[tawdry tree]

can’t buy merch with credits 😉

[fluid ravine]

[untold wigeon]

They don’t fit together. I tried. At least the dash’s

[fluid ravine]

Kinda funny how I can tell based on sound

[harsh dove]

Fair enough, even if they did, it wouldn’t be less wobble

Better off using stock

[untold wigeon]

Indeed

[tawdry tree]

Raw HE stem works fine with KS-20 housing but it’s just counterproductive

an increase in wobble because the stem is smaller

raw HE’s

[untold wigeon]

I couldn’t get the raw stem into the dash housing and vice versa.

[dim lava]

Trying to decide between the RAWs and the Raptors now, so RAWs have less travel and Raptors have red tint and stronger magnet. Do they both need to be hand-lubed or can you get away without it? Is the shorter travel a problem with the stock module stabs?

[harsh dove]

This is what I thought

I thought they did fit but would be increased wobble as the raw he stem is smaller

[tropic urchin]

Appreciate the replies, I was more after creating a different sound/feel than to reduce wobble specifically, but all good to note. I wanted to try and create a franken build without using Lekker stems which seems most use for theirs. I might be better off just hand lubing a little without going too crazy waiting for shipping 🥲

[tawdry tree]

I think you mean Dashes stem in Raw HE housing, that indeed doesn’t work but vise versa does.

[tawdry tree]

Yeah.

[fluid ravine]

I would elabtorate. But simple answer: Get RAW HE>>

[harsh dove]

Both are fine factory lubed, but hand lubing makes quite the difference, shorter travel will not affect your stabs necessarily unless you have loose fitting keycaps

[untold wigeon]

I couldn’t get them in the bottom housing. Maybe I was doing something wrong

[untold wigeon]

https://tenor.com/view/mando-way-mandalorian-star-wars-this-is-the-way-gif-18467372

[tawdry tree]

Raw HE’s stem in Dashes’ housing. Raw HE’s stem doesn’t have those protrusions either so both ways work.

[untold wigeon]

I’m not saying I don’t believe you. Just that I did it wrong

[tawdry tree]

Yeah I know, I’m just checking myself again if I remembered correctly.

Lavenders with Dashes’ stem, color scheme fits great lol

[untold wigeon]

Now this I like. That would fit my purple aesthetic perfectly

[fluid ravine]

oooo

[tawdry tree]

Not great, there seems to be more friction than with any other variant. Kinda interesting.

[untold wigeon]

Still looks great

[tawdry tree]

Yeah the lila is nice

From a couple days ago. Raw HE top, Light Wind (Black Knight) stem and Lavender bottom. To achieve the low wobble of a Raw HE top and Black Knight stem but with a closed bottom instead.

[untold wigeon]

I’ve never been crazy about the box stems

[tawdry tree]

Can help a lot with bottom out wobble. I like em. 😄

[elfin garnet]

https://oblotzky.industries/

Oblotzky is having a summer sale for any EU people that wants to pick up a GMK set

[tawdry tree]

What the fuck

Oblo? Sale? ???

First time doing a sale?

[elfin garnet]

Yup. Went live today and lasts until 19th of august

[wind turtle]

Hey. I just bought the PC plate for my 60he. Is burger mount still necessary with it?

[untold wigeon]

I should clarify appearance not function. lol

https://tenor.com/view/no-nooo-nope-eat-fingerwag-gif-13236867

lol. 😂

[tawdry tree]

LOL

box stems are ugly

[broken cape]

jesus i just had a look onto their page, this is definitely one of the more expensive things i've seen

[left knot]

Whoever recommended the Dashes is a legend 🙂‍↕️

[harsh dove]

Is the light wind a closed bottom? I can’t recall

[uneven cradle]

yeah i saw sounds very nice

[tawdry tree]

Open, a recolored Black Knight.

[harsh dove]

Ah yeah that’s right hence the parentheses

[tawdry tree]

There are boxed stem version of Hejin Yellow and Teals as well apparently.

[harsh dove]

I’d imagine it doesn’t work optimally then with a closed bottom just like the BK stem

[harsh dove]

Interesting

[tawdry tree]

Yeah, not great with Woot.

[harsh dove]

Yeah

[tawdry tree]

I checked a few videos about magnetic switches on Bilibili and saw switches I didn’t even know existed man

😂😂

[harsh dove]

Bro

It’s crazy when you get on those sites

[untold wigeon]

Isn’t Bilibili like an Asian YouTube?

[tawdry tree]

There’s a lot on Taobao but it’s a pain to browse.

[tawdry tree]

Yes!

I think it’s chinese only but not sure.

[untold wigeon]

I thought so. I saw it on a show I watched. Because YouTube is banned in some Asian countries?

[tawdry tree]

Probably

Eh maybe not, I’m subscribed to a few people that live in china so I don’t think it’s banned entirely

maybe bilibili is preferred or something?

[sour flower]

well i acquired springs

left is stock

[untold wigeon]

Is far right a 5,000g spring? lol.

[cedar gate]

5kg spring lol

[marsh saffron]

Building a keyboard for shaq

[untold wigeon]

Nickname it the 11 pounder lol

[elfin garnet]

Definitely not cheap. I can agree with that

[sour flower]

i cannot compress the far right one

the smaller one fits in the spring, but does nto stay closed

[marsh saffron]

Like it pushes the switch apart or wdym?

[sour flower]

the plastic latches? i dunno what to call them, dont stay latched

[marsh saffron]

LOL

[sour flower]

i can't actually close the switch but the small one was at least 3.2kg

the big one at like 1/4 compression is in excess of 4kg

i have made a mistake i will purchase more springs

(also they are extremely magnetic so i was lied to about the material)

is it public knowledge what material lekker springs are made of?

or jade switches for that matter

[marsh saffron]

Not sure

I know you can buy non magnetic springs on wooting/AliExpress

[cold bloom]

agreed

[harsh dove]

Pretty sure they’re aluminum but I could be wrong

[harsh dove]

Just by looking at those I could’ve told you they weren’t going to work lol

[sour flower]

the 0.9mm one almost worked

im ngl

like its close

[harsh dove]

But it’s not non magnetic

[sour flower]

do u know who can confirm that by any chance?

[harsh dove]

So would’ve had issues when typing

[sour flower]

oh that ya sure

[harsh dove]

I can go ask

[sour flower]

if they have a vendor i can go to even better :^)

[harsh dove]

There’s an AliExpress listing that people here have used that sells non magnetic springs

There’s also the new wooting spring packs

[cold bloom]

https://www.aliexpress.com/item/1005006335105764.html?

[uneven cradle]

also geon releasing some soon

[jade storm]

Brothers.

[polar girder]

Springs for HE?

[cold bloom]

yeah

[polar girder]

Neat

[sour flower]

ya but its only 120g

(also my friend did the math that large spring is 37 foot pound)

woopsie

[untold wigeon]

Too bad the mechbox gigachad spring is MX only.

1200g bottom out.

[sour flower]

i have a 1500g one in a kailh speed navy

i need some 300g/500g springs for HE

[cold bloom]

Anyone wanna a set of unused black jades

[untold wigeon]

lol. Good edit. 3,300lb keyboard spring.

[untold wigeon]

https://tenor.com/view/friends-ross-geller-david-schwimmer-tv-series-american-sitcom-gif-10468074290607788394

Oh never mind. I thought it said black knights. Already have the Dashs

[cold bloom]

lol no worries

[harsh dove]

They have other options on the listing, 120g is not the only one.

[sour flower]

is there heavier than 120g?

[untold wigeon]

120 was the biggest non magnetic one I’ve seen

[harsh dove]

Oh wait you want higher?

My bad

[sour flower]

yea

[harsh dove]

Can I ask why

[sour flower]

this :)

[harsh dove]

But why

[sour flower]

i like heavy for typing

[harsh dove]

Oh okay

[sour flower]

my main keyboard i have 370g clickies

[cold bloom]

holy

[sour flower]

i dunno if u saw my demo video of it #🌟│wooting80he message

[untold wigeon]

Here I thought my 100g Raws were thick bois. Lol

[cold bloom]

your lumbricals must be jacked

[sour flower]

dunno what a lumbrical is

but prolly

[cold bloom]

hand muscles

between your fingers haha

[sour flower]

ah, prolly, i dunno tbh i just like the feeling of never hitting a wrong key

[harsh dove]

Yeah I’m afraid you are probably one of a kind and will not see springs that heavy for HE unless you get them custom made or something

[sour flower]

thats what i had to do for the clickbars too sadly

look at that beefy clickbar tho

[untold wigeon]

I like this guy.

[harsh dove]

What’s your typing speed with keys that heavy

[sour flower]

~120-130wpm

[polar girder]

4

[harsh dove]

Wow nice

[jade storm]

what's up

[sour flower]

a minute is probably the longest i can go tho without slowing down

[untold wigeon]

1 wpm with 3 broken fingers. Lmfao

[harsh dove]

Yeah

[sour flower]

wanna hear the foamed clickbar modified 370g clickie? (yes i foamed the switch)

[stark osprey]

https://tenor.com/view/dont-worry-tina-tinakitten-100thieves-cross-my-fingers-gif-24645017

The guy your girl told you not to worry about.

[cold bloom]

lol if you want em they're yours

[jade storm]

DMs?

[untold wigeon]

https://tenor.com/view/laughing-laugh-funny-hilarious-drunk-gif-13758353

[spiral anvil]

Raw HE comes Wednesday

[stray tiger]

For those of you in the EU (or the US maybe) Oblotzky is having a nice sale on GMK sets https://oblotzky.industries/

[prime orbit]

is the redux the cheapest option

for cases?

[uneven cradle]

not the cheapest but one of the best "cheap" options

just that shipping fee that gets most places

[mighty walrus]

Anyone know of a replacement switch that has all the same specs of the stock wooting one but has zero stem wobble?

I don't care about sound. I just want to game without my keys wiggling under my fingers.

[uneven cradle]

the upcoming lekker v2s

[mighty walrus]

Oh really? Any info on them?

[uneven cradle]

there's a little section on the 80he page

https://wooting.io/wooting-80he

[mighty walrus]

Thanks for sharing.

[prime orbit]

I’m finally joining the homies

[prime orbit]

Yeah it’s like $110 total so I’m wondering if a cheaper option exists lol

[mighty walrus]

So the lekker v2 doesn't have a box stem? I thought that's what gives a switch less wobble?

[steep cape]

Doesn’t the module already come with a PC plate?

[uneven cradle]

nope just improved tolerances

will make a big difference though

[prime orbit]

Yes however I want black

[tawdry tree]

Box stems only help with wobble at bottom out in some cases (only if the tightness is because of the top housing, then box stems can help greatly). Lekker V2 aren’t box stems though.

[prime orbit]

Plus 50% off so why not

[mighty walrus]

Interesting. Thanks for sharing that info. I'll have to try them out when they start shipping I guess. Hopefulling wooting sells them soon.

[tawdry tree]

Should be next month, hopefully.

[mighty walrus]

Word.

[dim lava]

Sounds good, so it’s not worth adding any lekker or jade switches in with the module order for frankenswitching? Sounds like a waste of $20 for lekkers as I could just use RAW HE as is (maybe hand lubed)

[prime orbit]

Brass bar needed for the redux?

[mighty walrus]

Are the Gareon jade switches like the v2 lekkers?

[marsh saffron]

I recommend it

[prime orbit]

kk

[prime orbit]

is there a cheaper alt to the redux?

[harsh dove]

Should be sooner than that

Little birdie told me

[marsh saffron]

Not that I'm aware of

[harsh dove]

Gh60

@prime orbit

[prime orbit]

what company

[untold wigeon]

Look them up on Amazon. There are a few.

[prime orbit]

yeah i see

[untold wigeon]

Look up gh60 case.

[prime orbit]

comes pretty late tho

sep 3rd

[untold wigeon]

From China. Unavoidable

[prime orbit]

rip

Do I trust? Lmao

[fluid ravine]

plastic low profile?

[prime orbit]

not sure just says gh60

but for hella cheap lmao

[fluid ravine]

it prob is

send link

the GH60 i got is like $70

from Tirade

[prime orbit]

Just found this amazing item on AliExpress. Check it out! $9.40 | GH60 Compact Keyboard Base Seat 60％ Keyboard Poker2 Plastic Frame Case 95AD
https://a.aliexpress.com/_mtuUCio

[stray tiger]

Don't assume just because a switch has a box stem that it will have less stem wobble or be a superior switch (if that was the case why not only make box stems?). Even box stem switches can sound and feel bad.

[modest token]

Bought this shit hasn’t come yet should be very good for it’s price

https://www.amazon.com.au/dp/B07TSPGTXQ?ref=ppx_yo2ov_dt_b_product_details&th=1

[marsh saffron]

It's plastic so that's probably why

[fluid ravine]

[prime orbit]

plastic bad?

lmao

[marsh saffron]

Just explains the price

Although I always would prefer metal

[prime orbit]

but still fine to buy?

[cedar gate]

No that's shaqs keyboard 🤣

[stone elbow]

will there be any differences between the first batch and batch 1.5 for the x-rays?

[stray tiger]

Yes. Different delivery dates

[cedar gate]

Worlds biggest keeb and its only a 60% 🤣

[stone elbow]

lmao, found that there' still stock for the initial batch, was just wondering if i should just cancel my pre-order and get the initial batch instead

[stray tiger]

If you want them sooner then yes.

[prime orbit]

hmmm

$30 cheaper

w

[short birch]

for future reference, if getting both the 60he+ module and alumaze which case foam should I use or are they both the same?

[stone elbow]

i used the case's foam, i figured since it came with the alumaze, it was probably made for it

they might be the same? i didn't take a closer look at both

[short birch]

ohhhh ty

[prime orbit]

Anyone know the diff between freebird and tofu

[cedar gate]

I think freebird has a lower angle

And less weight I think too

[prime orbit]

redux worth the $30?

[cedar gate]

I prefer tofu but thats just me

[cedar gate]

If you can get redux for 30$ I envy you

[prime orbit]

$30 more LMAO

110 for me

[cedar gate]

Oh yeah for sure

More weight and better sound

[prime orbit]

kk

[cedar gate]

At least imo

I payed like 115 fr sure worth it

[cedar gate]

And make sure you get the weight helps with sound and feel

[prime orbit]

cheapest place is kbdfans unf

[cedar gate]

Yeah btw when you get it your case comes with these little foam pads that go on the semi circle parts of the case make sure you use those

And the space bar screw needs a stand off

[prime orbit]

i heard not to use the stand off screws

$105 in aliexpress

nice

[urban rock]

what stabilizers do you guys suggest is best for my build. I preordered the 60he+ module, i bought the tofu redux and gateron jades. i plan to tape mode it, maybe burger mount it.

i read up on some tx and staebies but i got mixed reviews on it

also should i do any other mods to make it sound better that wont mess with what keeps the board competitive

[mighty harness]

I don’t see wooting Rappy Snappy and SOCD in the wootility web anymore

Is it just me?

[glossy steeple]

Hey y'all, geon raw HEs or Gateron Jades?

[mighty harness]

gateron jades just buy lighter springs

[stone elbow]

aren't the gateron jades already so light?

i can still see rappy and socd on beta wootility

[uneven cradle]

it's currently only on beta.wootility.io

[mighty harness]

its 50gs

id buy it with the 35g from wooting

[mighty harness]

i forogt about the beta part thank you

[stone elbow]

everywhere i go it says 30g

[uneven cradle]

the bottom out force of the Jades is 50 #🪛│modding_faq message

[cedar gate]

No you need the included brass standoffs

[cedar gate]

Tx ap 1.6mm long pole

[stone elbow]

ah i see

[cedar gate]

Raw he for sure it's literally a more stable jade

[mighty harness]

thats still heavy imo but thats my preference

[cedar gate]

Also spring weight is 100% preference I think 35g is way too light most people like 63.5g and I like 45g

[glossy steeple]

Thank you, have you tried the Geons as well?

[harsh dove]

Raw he

[mighty harness]

not yet imma buy it when the 80

ships

[harsh dove]

Raw HE has better tolerances and a cleaner sound than the jades

[mighty harness]

its tedious but im prob gonna toss this in the jades

im currently rocking raptors with lekker stems and 45 springs

[glossy steeple]

You a fan of the raptors?

[mighty harness]

https://www.youtube.com/watch?v=SKcGBGzSQmg&t=219s

[urban rock]

are the geon raw HEs the best switch to get for wooting? or is there a better one

i might just refund the jades then

[mighty harness]

https://www.youtube.com/watch?v=TdnA6VT6C00

the jades has deeper tones

[harsh dove]

Best is subjective but they do they the tightest tolerances currently

[harsh dove]

Take sound test with a grain of salt

[mighty harness]

true

[harsh dove]

In person Jades are louder/clackier than Raw HE

[mighty harness]

the raptors are cool

[harsh dove]

Raw he is cheaper than jades if that helps convince you

[mighty harness]

^ def a plus

the jades are like $73 US in wooting site

[urban rock]

i did amazon so they were like 54

im still deciding since personally the jades sound better

should i get the tx ap long pole stabs either way?

or are stock fine

[mighty harness]

my next move for my 80HE order is gateron jades with L35 springs

[harsh dove]

That’s the difference with ordering jades from wooting, the wooting ones comes with long pole stems for your stabilizers in the case that you may need them

Stock stabs are fine , you can run into issues with keycap tolerances which can be alleviated with small silicone o rings or long pole stabilizers

[glossy steeple]

Thank you all for info

Any Canadian retailers for the Geon HEs?

[untold wigeon]

Dash vid #1

Raw HE vid #2

[urban rock]

i dont mind price too much since im already buying like a 200 dollar keyboard anyway

i might as well go all out

i just want a nice sound

[mighty harness]

very similar to my lubed l45 v1

[spiral anvil]

Trying to find good Artisans that don't look jank on KAT profile is

[sleek wagon]

Anybody have recs for an all black usb c cable compatible with wooting, my cable mod one already shit itself

[harsh dove]

https://wooting.io/product/detachable-cable?Color=Stealth

[fluid ravine]

Remade my sound test

lul

got a proper one now

[urban rock]

if i get the geon raw HEs, should i still get tx ap long pole stabs?

[fluid ravine]

No need, if you do have issues then sure

[urban rock]

convinced me with the sound test tbh

[fluid ravine]

But it's not a guaranteed problem

And plus it's more of a keycap fault rather than the switch and stabilizer

I have TX AP plate mounts, no issue at all

even people with stock stab dont have a problem

#🪛│modding_faq theres a update on the jades being included with a long pole stem

[fluid ravine]

[untold wigeon]

When did your Raws come in?

[fluid ravine]

fkk uhhh

gimme a sec

This is with a silicone pad

Jun 19 2024 @untold wigeon

[untold wigeon]

I’m dying to hear the silicone pad.

[fluid ravine]

almost 4 weeks already

[untold wigeon]

Oh nice. Sounds really good

[fluid ravine]

Thanks

The silicone pad sounds a bit more muted but the higher tones are really there

the mids just dipped

[untold wigeon]

Definitely. I like the board flex at the end to.

[fluid ravine]

hehe love board flex

like em bouncy

[mighty harness]

RAW HE?

[untold wigeon]

https://tenor.com/view/cat-bounce-roomba-gif-25566340

[fluid ravine]

Yessir

[urban rock]

damn, the shipping for the raw HEs makes it like 58$

[fluid ravine]

oh damn you got unlucky

Where are you at?

NA?

[mighty harness]

lubed?

[urban rock]

25 for shipping😭

im in mass

NA yea

[fluid ravine]

Yessir, stem (spreading the prelube), bag lube springs, and thin coat on top housing

[fluid ravine]

oh wait nvm

I read that wrong

how many switches you getting

120?

im guessing

[fluid ravine]

I mean aint too bad

[harsh dove]

insert random RAW HE sound test here
#🔧│keyboard_modding message

[fluid ravine]

NUH UH

lul

[urban rock]

70...

[harsh dove]

Lowkey just realized how deep mine kinda sounds

[fluid ravine]

Xray keycaps?

[harsh dove]

Yeah

[fluid ravine]

ye ye

They're PBT no?

[harsh dove]

ABS

[fluid ravine]

$58 for 70????

that dont sound right

it should be abt 40

no

33.6

tf

[urban rock]

its like 38 but 25 for shipping

[fluid ravine]

how u getting 58

ohhh you meant in total with the shipping?

[urban rock]

yea

[fluid ravine]

mbmb

hmmmm

[urban rock]

its the same anyway since i paid the same for the jades

[fluid ravine]

should go for 65 @urban rock

[urban rock]

i just care about sound rn

[fluid ravine]

if you're buying for a 60he

buy 65

[exotic inlet]

Ye, shipping is crazy in there I tried before and said better not to

[fluid ravine]

it will be abt 31 bucks

[urban rock]

im just scared breaking one by accident

[fluid ravine]

DHL express is goated with how fast they get their package here

hate the price

but the service lowkey pretty gud

[fluid ravine]

then you got 4 extra

and by chance you will get +1

so 66 switches actually

I got a 65 set and they added +1

for free

so did CAM

[urban rock]

fk it, ill do 65 yea

[fluid ravine]

save yourself 2 bucks

lol

[polar girder]

Oh we’re team DHL now?

Damn Cam is weeping rn

[harsh dove]

Lol I mean DHL always been fast they just always charge me extra $35

[polar girder]

#NeverForget

[harsh dove]

[polar girder]

lol

[fluid ravine]

exactly

i'd diss them

but they get the job done

[glossy steeple]

Another question, Dash HE or Geons?

[urban rock]

i heard dash is just jade recolored

[fluid ravine]

it indeed is

[fluid ravine]

Well at this point it depends on what you like more

if you ask me personally, i'd go with RAW HE any day

Then I'd put Jades/Dashes as my second

[glossy steeple]

Thank you, I only ask again cuz the Dashes are cheaper to get to me in Canada

[fluid ravine]

Yeah i would into like preference first then go over price and see where you go from there

[spice plover]

I get my raw HE switches on the 14th

[fluid ravine]

yoooo W

[spice plover]

I modded everything though can’t wait to get it set up hopefully everything goes easily xD

At worst I’ll go into the discord and livestream while crying for help we will see

[fluid ravine]

lol

ill be there trust

(I don't wanna school)

[signal ridge]

how much better is raw he

[fluid ravine]

Comparing to...

[signal ridge]

l60

[fluid ravine]

major

[cedar gate]

Oh i remember the feeling of dread right before summer ends 🤣

[fluid ravine]

To be real, i only had a one week break this whole summer

[cedar gate]

Working a summer job?

[fluid ravine]

which was last week

[fluid ravine]

nah, i was doing summer work to obtain a credit

took geometry during the summer, so im talking algebruh 2 this year

[cedar gate]

I usually picked something I knew I would like for a summer job

[fluid ravine]

i can't drive yet xd

[cedar gate]

If your smart enough try doing those APs good colleges get a hard on for those 🤣

If you don't want to put in all the work for an ap dual credit is good too

[fluid ravine]

taking AP CS

this year

Dunno how to feel abt that :D

[cedar gate]

It's hard but hang in there it's worth it

[quiet bay]

o lawd good luck

how were vb tryouts today btw

[fluid ravine]

was fun, it was a bit out of my zone cus of the temps of the gym, i'd usually be playing in a super fking humid place for practice

can't serve for shit cus of how smool the gym was

but i played well as a outside hitter

[quiet bay]

dang I dream of an air conditioned gym

[fluid ravine]

shit was COLD

[quiet bay]

my gym had just big fans on the walls..

[quiet bay]

i lov cold

better than being super super sweaty ig 😭

[fluid ravine]

well cold kinda bad imo

chilly is fine but not like cold

Nevver gonna be playing setter, i SUCK at setting

[quiet bay]

i haven't played volleyball in so long 😦

[fluid ravine]

dem arms finna snap off

[quiet bay]

it was mad fun but the boys kept using the damn volleyball as a basketball 😭

SHHH

[fluid ravine]

LOL

[fluid ravine]

RIp

[quiet bay]

they deadass played basketball with it

[fluid ravine]

at my school the boys would kick it

[quiet bay]

cause our gym serves as both basketball court

and volleyball court

so there's a basketball net

[fluid ravine]

nah bruh i rather have boys playing basketball with the volleyballs than boys kicking it to narnia

our balls are beat up due to the kicking and we would have to buy new ones

[quiet bay]

wth

why they kicking that shi

[fluid ravine]

Despite our school not being rich, hell it might be the reason why we dont got hard balls like mikasa

[quiet bay]

the only time I kick the volleyball is if it's already to my feet

[fluid ravine]

yeah same

or recieving it 😂

[quiet bay]

dw we got those 20 dollar volleyballs

at my middle school

[fluid ravine]

same

got a $20-30 vb

it's a Tachikara ball

i own one

[quiet bay]

if it works it works ig 😢

[quiet bay]

dang I got a busted up ball from five below

it served good purpose tho atleast

[fluid ravine]

I would prefer the Molten L2

composite leather vb, its like the mikasa balls

[quiet bay]

oo fancy

maybe one day I will get to touch a real volleyball

a real professional volleyball atleast

[worthy epoch]

give me the link pls

[fluid ravine]

https://geon.works/products/geon-raw-he-switch?variant=44485658280099

[worthy epoch]

ty

[quiet bay]

btw

if ur NA

u should go to divinikeys

since it'll have cheaper shipping

[worthy epoch]

yup i am

[worthy epoch]

link pls?

[quiet bay]

https://divinikey.com/products/geon-raw-he-linear-switches?_pos=1&_psq=raw+he&_ss=e&_v=1.0

[worthy epoch]

thanks

[quiet bay]

if u have 60he you only need 4

👍

[worthy epoch]

one more question tho

any gmk set fits wooting?

with raw switches

[quiet bay]

well all of them should

[worthy epoch]

aaand last one))

those are pbtfans x ray?

[quiet bay]

i cant rlly see clearly but they just look like blanks from that distance

[untold wigeon]

Mine with GMK Devoted.

[worthy epoch]

thanks yall

[quiet bay]

👍

[thorny jetty]

huge advice, thanks !

[rough berry]

can anyone recommend better or close to alternatives of the tx ap stabilizers cause the shipping time is gonna take forever for the tx ap

[untold wigeon]

I think they are. X-ray. You can’t really see the legends on them. White on white.

I have a set like that and swapped it out because it was impossible to read.

[quiet bay]

im saying blanks cuz xray kinda has this transparent layer around them that you can kinda see

also ngl depends on what time that photo was taken from

since xrays were only just recently on sale

[untold wigeon]

True

[steep cape]

Does the stability over the jades make much of an impact? I’ve only really used fairly wobbly switches before

[quiet bay]

if anything I think the raws might be tighter than jades lol

[fluid ravine]

@untold wigeon For no particular reason, i took a super thin linear case foam sheet from my GMMK compact, and for some reason it works 😂

no hollowness

pretty wild

it's like paper thin

[quiet bay]

ye the wobble in switches does contribute to sound ngl

ex. V1 Lekkers 💀

[untold wigeon]

I have one on my board. Came with the kbdfans plate

[sweet oak]

It’s just funny just how much quieter my UwU is compared to my two he

[worthy epoch]

broski, what's the difference between idk 60$ alum case like tofu redux and idk 120$ alum case like holy60 and another like 300$ alum case?

[untold wigeon]

Brand, quality, accessories, modability, price.

And preference. Buy what you like

[fluid ravine]

"$60-$100 and other alu cases from $100-$500 do have a major difference in terms of quality which reflect to sound. Usually the general rule in science with sound and density is that the more dense the material is, the less it resonates and ping. So if you compare a $60-$100 case like the Tofu Redux to a $250 Fjell, the Fjell will automatically win in terms of quality, sound, and feel. (Looks are subjective) But now why is that? Good keyboards would usually not need foams or anything that need to reduce or modify the sound. Case foam is a type of factor that would help a keyboard sound better (usually when there is hollowness or just bad ping in a cheaper aluminum keyboard case). If the quality and material of the aluminum is really high, heavy, and dense, then the board will provide you much lesser ping than a $60-$100 aluminum case, which also means that you would not need any case foam or sound acoustic modifier. But it is best to not kill your wallet just for the sake of a keyboard case so you can always go with something cheaper like a Tofu Redux, Posidien, or like a GH60 Case like I have. "

I wrote this for a comment on yt 😂

[worthy epoch]

ohh mannn hello ahahha. I remeber that, i just thought someone could add something to this

[fluid ravine]

oh shit its you!

LMAOOOOOOOOO

Wsg

[untold wigeon]

https://tenor.com/view/lazy-bum-dog-doggo-dogs-gif-4887156

[fluid ravine]

cmon man 😭

i worked hard on these replies

[worthy epoch]

im just deciding which one tp buy

holy60 or tofu redux

[fluid ravine]

to be honest

[worthy epoch]

nah man hes the goat. he helped me A LOT

[fluid ravine]

Holy60 may look cool to sum but it's a hard case to work with in terms of sound

[untold wigeon]

I know I’m teasing

[quiet bay]

honestly just go for a clacky pop build with the holy60

[untold wigeon]

Agreed. If sound is a priority then the Holy60 should be avoided

[steep cape]

I was thinking overall feel while typing/gaming more than the effects on sound

[fluid ravine]

look how thin this shit is

like it works

[worthy epoch]

then like tofu redux is the safest option?

[fluid ravine]

kinda

nvm

i take it all back

[untold wigeon]

Oh nvm. Mine goes between the plate and pcb

[fluid ravine]

i take it back it doesnt work

The cut out didnt fit, which made the sheet like warp so it wasn't directly on the case

so it did work

but when i made some cutouts for it to fit

[untold wigeon]

lol. That was quick

[fluid ravine]

it sounds hollow

stupid frigin ugh

[untold wigeon]

Is the polyfill in it?

[fluid ravine]

nah just that liner

just wanted to see what it's like for no reason

im bored

[worthy epoch]

Is there any site i can buy all of these together?

[untold wigeon]

Boredom is the devil’s playground. lol

[worthy epoch]

NA

[fluid ravine]

hate to say but you gotta buy all them seperately for these products
Geon
KBDfans/Aliexpress
Swagkeys

[worthy epoch]

(

[untold wigeon]

@fluid ravine fill the bottom with foam sand. No more echo. lol

[fluid ravine]

palced the polyfill in, made no difference xd

[fluid ravine]

Kinetic san

heheheheh

[untold wigeon]

Yes!!!!

[fluid ravine]

no fk that i aint trying to murder a wooting

unless i win a module...

[untold wigeon]

Really??? Didn’t clean up the hollowness at all?

[fluid ravine]

oh wait mb

i had a brain fart typing thjat

There wasn't a difference like with and without the liner when using the polyfill

i noticed a slight pcb raise though

[untold wigeon]

That makes more sense

[untold wigeon]

@quiet bay is the queen of board height. Stay in your lane.

[fluid ravine]

not even close

[fluid ravine]

NOPE I TAKE IT BACK AGAIN

It's a bit more poppy with it

I can't notice it much but i hear it in the bottom out

[untold wigeon]

I hope you’re recording all these changes on video. It’s the only way to know where you’ve been.

[fluid ravine]

https://www.youtube.com/watch?v=_N8k0u75eLQ

took inspo

i saw a foam sheet and i thought abt it

[fluid ravine]

ermmm

fine

will in a bit

need to shower before i eat dinner first

[untold wigeon]

Not for me, for you and your sanity

[fluid ravine]

NO

what sanity

[untold wigeon]

https://tenor.com/view/crazy-omg-shocked-what-the-gif-16789848374806317711

[polar girder]

I tried kilmat, lots of polyfill and little polyfill. Kilmat was the move for sure

Finally full committed and attached it to the case lolz

Tempted by this nylon plate but I think I’m tired of fucking around

Even tho I have an alu plate coming at some point

Pumped for the new cable sometime in the next month tho

[worthy epoch]

@fluid ravine check pms please

[quiet bay]

actually they can all be bought on divinikeys

[fluid ravine]

oh ait fr?

oh mb

i didnt know

wait WHEN TF DID DIVINIKEYS SELL TOFU REDUX

[quiet bay]

idk but they have it xd

they gotta restock tho

they also do have the swagkey stabs

[fluid ravine]

[quiet bay]

BUT THEY ALL OUT OF STOCK SMH

technically could be bought al lon divinikeys if...in stock

reasons why I luv divinikeys tho c:

[urban rock]

is swagkey better than tx?

im still trying to find the best stabs i can find

[fluid ravine]

If you're looking for screw ins then yes

Based from CAM's review

[urban rock]

i dont really wanna relube if i can help it

ik its hard to do gummyring mod without the tx clip on stabs

is the gummyring worth doing

[urban rock]

is there a video i can check for this?

[urban rock]

nvm i just sent it and bought the knight stabalizers

[polar girder]

Yessssss

[calm pulsar]

W

[polar girder]

This thing is gonna be so sick

I’m pumped

[quiet bay]

oo going fancy I see

[harsh dove]

https://tenor.com/view/my-man-my-man-denzel-my-man-hd-my-man4k-gif-23532550

[sage widget]

Is it normal i’m having trouvle screwing in the screw for the spacebar on my tofu60 redux

Like the original screw doesnt reach it seems im not sure

[harsh dove]

Do you have the brass standoff installed?

[sage widget]

I put a foam thing instead cuz i didnt get one

So i do have something filling that up

Every other screw went in np

[harsh dove]

Yeah the wooting comes with 2 brass standoffs

[sage widget]

Wait mb i misunderrtood ur question

[harsh dove]

You have to screw one of them into the case underneath the spacebar

[sage widget]

OHH i see

Just that one?

[deft turtle]

Anyone who has the tofu60 redux how does the brass weight affect the sound?

If at all

[fluid ravine]

If the weight in the case increases, then density will as well, and as the density increase the less ping

[harsh dove]

Yes

[cold bloom]

bruh came with receipts

[cold bloom]

also what case is that?

[fluid ravine]

GH60 case from aliexpress

It's like a tofu v1 clone

gifted from tirade

[cold bloom]

bruh I gotta send you my tofu

one of these days

[fluid ravine]

LOL

Paint got scuffed lul

[cold bloom]

I noticed that before

[fluid ravine]

Pochizo and I are thinking about vinyl wrapping it

[cold bloom]

unfort

[fluid ravine]

LOL

[cold bloom]

ouu

[fluid ravine]

yea...

[cold bloom]

what about a cera coat

or like an ano of some sort

[fluid ravine]

Dunno

Dunno how

never painted or all that

[cold bloom]

wouldn't be that hard just need the space and tools

that's the hard part

[fluid ravine]

oof

i got a heat gun and everything already

[cold bloom]

https://www.wikihow.com/Anodize-Aluminum

I mean

do not try this at home

but it's possible

[cold bloom]

do NOT

[fluid ravine]

[sage widget]

DONE

Lubed , tofu60, tape mod

[fluid ravine]

gyatt

never saying that again

[cold bloom]

never done

never finished

[fluid ravine]

That video process is the definition of never finished

[fluid ravine]

Alr u growned up now go into the big world and do crazy shit

(congrats on finish lubing)

[sage widget]

🙏🙏

[quiet bay]

oh lawd

Vinyl wrapping is the budget option here

[cold bloom]

LOL I was just trolling

[fluid ravine]

Chat first day of school tmr

Am i cooked!?!

[quiet bay]

o dayum wth

[quiet bay]

yeah I'd definitely burn myself with the acid LOL

[quiet bay]

u start school early ngl

[fluid ravine]

yeah

[quiet bay]

unless you ended school early i dunno

[fluid ravine]

well i get break before you

[quiet bay]

i start mine on the 26th 😂

[quiet bay]

truu

[fluid ravine]

fk man

well time to SLEEP

cry myself to sleep

Gn modders, see yall in the afterlife

[languid forge]

i bought it after hearing it can give a thockier sound

but some people said its worth it some people said you dont need to have it

up2u

[quiet bay]

less hollow sound 👍

[languid forge]

👍

[sage widget]

This might be a braindead question but is every keyboard hand assembled?

& hand lubed

[languid forge]

yes

[languid forge]

im guessing but I wouldnt be suprised if a machine did it

wooting makes yt videos on the assembly line

you can probably find a clip of the lube being added

[polar girder]

https://www.youtube.com/watch?v=f97IO2OcqaY

this makes me want to get a nylon plate lol

can't wait for hypekeyboards restock

then finally compare nylon, pp, aluminum

[sage widget]

Thats so crazy

I just spent 2 meticulous hours just dismantling lubing and putting back together

Hella respect to whoever builds these

[languid forge]

lol

[polar girder]

nylon restock next week on hypekeyboards

hype

[languid forge]

https://www.youtube.com/watch?v=WdLBEoLaUKg&pp=ygUVd29vdGluZyBhc3NlbWJseSBsaW5l

[calm pulsar]

@deft turtle #🔧│keyboard_modding message

[devout torrent]

What’s that material called?

[calm pulsar]

you mean in the gray case? its car noise insulation, I think its called sandwich type of material

[devout torrent]

Kilmat?

[quiet bay]

doesnt look like kilmat

[jade storm]

It's definitely kilmat, i wouldn't recommend it

[calm pulsar]

its some locally produced stuff, im from Russia, but I think the equivalent is kilmat

yeah its sticky and an ass to remove later so I'd avoid it 😄

its not bad for plastic cases, but for metals I think its fine if you just put foam

[polar girder]

i like it

lolz

[calm pulsar]

the thing is, on the left I also have the weight installed, so it probably provides more dampening than the sticky material

but it kinda adds some weight to the case, esp if you have a thinner case like my freebird60

[light agate]

does anyone have the kbdfans wooting plates? im thinking of switching mine but i can't decide between the carbon fiber plate or the fr4 plate... or if it just isn't worth it at all

mainly when i'm looking for is a change in feel

[magic forge]

used in melgeek's cyber01 - the jades sound amazing

[flat cobalt]

There's aluminum and polycarbonate as well

I like the FR4

[light agate]

are you able to describe the typing feel? i currently just have the stock pc plate that came with the module

[flat cobalt]

I wouldn't know how to describe the feeling @fluid ravine is pretty goated at all this info

[light agate]

hopefully i will get a response soon from them then 🙏🙏

[calm pulsar]

@untold wigeon has some sound tests of the CF plate
I have a full black FR4 plate, will be rebuilding my wooting today with it

also kbdfans released a PC and an aluminum plate not long ago @light agate

[light agate]

ooh okok! lmk how your fr4 plate feels, im thinking of replacing my pc plate with fr4

[calm pulsar]

okay I will do a sound test if I manage to finish building today

I have it installed right now, but im kind of ashamed to record a sound test now cause my jades have dried out on lube a bit 😄

[light agate]

its okay, i got jades too and i think some of them could be relubed lol

[calm pulsar]

looking at the module pcb before building and noticed that there’s something written in russian lol

[calm pulsar]

@tawdry tree these typeplus stab housings seem to fit into wooting PC plate and kbdfans CF plate
guess I got lucky? cause I think you measured these and they were supposed to not fit

though they are a bit tough to insert in some spots, mainly spacebar, it is possible

you can almost use the plate without any standoffs this way lmao

[calm pulsar]

@polar girder installing black stabs too

[crimson sky]

you are assembling them wrong

you need to get the stems in first

[calm pulsar]

I know, I want to test if my fr4 fits these

before fully installing them

[crimson sky]

ah

[calm pulsar]

cause these are TX AP long poles in the last pic

likely wont fit but ill try

[tawdry tree]

Yeah, I measured them at a width of 6.78-6.80 iirc. So too wide for Cherry spec which woot and kbd use. They’re on the looser side though so you might be fine.

It’s not really the fitment that’s the issue, it’s the functionality under the pressure of the plate (if it’s Cherry spec) that can cause stabs to not function properly/smoothly.

[calm pulsar]

oh that is a considerable point, I’ll be sure to test them properly

Im just trying these TX AP clipins first cause I want to do friction mount and screw-ins don’t work with gummy orings, I think

[tawdry tree]

Yeah clip ins work well, even with stiffer O-Rings. Screw ins, not so much.

[solar tundra]

Hey Guys im about to lube my ws dash switches, should i do only thin layers?

Is there any comparison how much lube got used and how its sounds

[untold wigeon]

https://www.caseking.de/en/ducky-keycap-set-pbt-iso-de-white-blue/GAKC-511.html

hi 🙂 Why is the price so low?

[calm pulsar]

they are lubed from the factory I think? make sure not to add excessive lube on already lubed spots

I guess springs will be the priority

other than that it should be a thin coat

[solar tundra]

They are prelubed but i think when i handlube them carefully it shouldnt be s problem

[calm pulsar]

yeah you can just check if there are parts that are not lubed

my factory lubed jades (which are pretty much the same switch as dashes) only had a bit of lube at the sides of the stem

[solar tundra]

So u lubed them a bit more?

You got any recommended Video where i got a good explanation for what to lube and what not

[calm pulsar]

no, I rolled with them until now
springs became noticeable after some time so I’d lube them

right now im using frankenswitches I built, and I lubed them fully

[calm pulsar]

my fav ones are guides from TaehaTypes and alexotos, they are on YT

[solar tundra]

Lube MX Style Switches Video b taeha?

[calm pulsar]

yeah, its not about HE switches specifically, but you can apply the same logic when lubing dashes

Taeha gives great explanation imo

[solar tundra]

Thank you

Prob also look his Stabilizer Video right?