#🔧│keyboard_modding
1 messages · Page 280 of 1
Something like Thock>Semi thock>Semi Clack<Clack
most mods are sound/looks
Weird question, but do we know what size screw driver I need to remove the PCB from the stock wooting case? I do not have one so I’ll have to order lol.
Types of plates have different resonance frequencies so it will reflect on its sound
BUT you guys would recommend one
yeah what material should I use?
for thock
or whatever
like
metal
etc
Anything with a low resonance like PC or POM plate
The first basic plate swap in the wooting community would be the PC plate
from their website
If you bought the prebuilt 60HE that has the steel plate, then you would need to buy another PC plate kit
If you bought the module however, you dont need to as it comes with it
I havent bought the keyboard yet (60he) I was thinking of buying the MODULE and then building arount it
so I should buy the module yaaay
im just tryna make it sound as good as possible
If you want to buy the module and buy the other parts, I would def recommend that
ALSO BIG QUESTION: DOES ANY MODDING AFFECT THE PERFORMANCE?
You're going to save some money
yeye exactly what I was thinking
Depending on what mods it is. Mods that will affect that distance between the switch and pcb.
hmmmmmmmmmmmmmmmmmmmmmmmm
ok pcb is what
printed circuit board
Yeah frog mini and Pom plate
okok googling this
the bit that goes bee boop beep scanning and shit
if you buy module you dont have to buy pc plate cause it's included with the module 👍
Like lets say plate swap for example, if you buy something too thin or too thick then the switches won't accurately actuate since it's not in its required distance and position
and the pc plate it comes with is good?
Another example of a mod that will affect its performance is switch swapping into the wrong switches that have compensation issue with the analog.
yeah
ok scary
how do I know if its perfectly shaped? and not too thin or thick
It's fine though, if you want to buy like aftermarket plates from other brands like KBDfans you can always ask if its compatible here to get reassurance
yo i have a stock wooting case with pc plate lubed lekkers and abs keycaps from wooting so would i buy thge jades or the lekker 45s or what would you do in my situation
👍
the jades
- Identify the layout
- Check if its compatible
- The plate thickness wooting needs is a 1.5mm thickness
- Ask here :)
i mean I dont mind the plates if it sounds good
very nice
ok thank you but where can i find a good soundtest my friend and would they be more smooth and more quiet
I ordered a PC one hope it sounds as good or I am ordering another one lol
youtube
your board sounds fantastic
yeye I thnk ill keep the PC plate that comes with the 60he MODULE
sounds good apparently
what tadpoles are you running?
I THINK?
It can only sound good if you make the board sound good, the board's sound profile doesnt consist on one thing, it consists of multiple things/factors
but telling ya raws are better but you cant get them 😔
true
60a (answering for him, I dont got it lol)
ty thockson
yup
Much love 🫶 
Oh yeh? Shi i didnt knoww congrats!
What plate you think of running
yo i dont want to be wierd but they sound clicky in my opinion like i like the deeper sound
just gotta wait for module since Id ont have aw ooting atm 😦
or are you trying to copy cam over here hehe
I got a pc plate otw for it as well
oh W
ok then get them
wich?
thoughts on my idea:
- Buy 60HE+ Module
- Buy Tofu Redux
- Buy L45 (pre lubed)
^ this is my list so FAR and im just trying to learn what else to add to make it sound better. is this good so far?
the ones you like
get raws then
were so back
i alriedy have lekker but i hate the stem wobble
september cant come fast enough man I need module to ship LOL
v1?
wait for the v2s then
ok nvm i read that wrong but er...
I never liked jades either so 😭
i should be getting my case and a switches this week were getting close
Personally, I would get a different set of switches, something with the same neutral and lower pitched but something that would sound cleaner
now i need the keyboard for the module and then the keycaps🦧🦧
https://www.youtube.com/watch?v=ScmXK-EVHgQ maybe this is a better sound test
Check out my website for cool stuff like breakdowns of my Wooting 60HE, PC, Gaming Setup and More: https://owenminercs.com/
Subscribe if you enjoy CS2 and PC Content :)
Microphone: HyperX Duocast
Mod List -
Case: GH60 Aluminum Case
Gummy O-Ring Mount
Keycaps: PBTFans Crosshair Alpha
Sound Dampening: Custom Silicone Mold
Tape Mod (3 Layers)
S...
WHAT NOW 😭

what is the cleanest switch in ya opinion?
and wdym by neutral?
i still haven’t pulled the trigger on caps, and i didn’t get pc plate so that’s like kinda annoying me with how much it is to ship and how long it takes
Something that isn't to loud but isn't to deep
Ngl I'm on the stock plate rn
You can achieve good creaminess
ok yeye
Raw He
what now?
huh I was replying to fren
do they all feel the same (the switches)
Like, Lekker v2 (l60/l45 v2), GUGU (sry Aligner) Black Knights, KS20U
Something for thock pochi
with the right config it can thock 😤
you hit your own brick wall bro
oh yeayh mb mb
Yea
Tape Mod
what do u use?
lul
lmao
im stranded with these lekkers bro
ALSO i heard of tape modding looks weird ASF is it worth doing it?
just buy the raws
I dont use any of them, its just my personal recommendation for thock.
I'm using the RAW HE as of right now, going for a clack build
I CANT
looks?
like how
#1261492527433781320 message @languid forge
It's an easy and cheap mod that i can recommend for beginners to try, its undoable so if you dont like it then you can always take it out
I mean you just slap some masking/painters tape on the back of the PCB, put the board back together, and see if you like the sound or not
Sickkkk
hmm
What color
i just bit the bullet man, then once everything gets in il
Figure it out
ahhh man
this keyboard stuff is crazy
so many things
so many options
so many sounds
i just have a feeling the wootings gonna take tthe longest to get to me
green
but fun
you like buy then
Yup preference is a very big thing in this hobby
tempted to cancel module and buy wooting 60he+ and then swap to screw in stabs
or pretty much everything
yeah but i cant with my parents
i think im looking for thocky sound ill double check
kk
sound tests on yt real quick
what is it their money
👍
lol why
I wanted purple but hard to find
Truu
because module oos 😦
Wait Lizard, i dont wanna like expose you or anything but can i ask how old you are (you dont have to, can always say no, just wondering)

16 why

yeah cheaper to wait lol
Ah damn, yeah i feel you
Oh shit
thackson
Sup sup

so what now
so like you stop saying so what now
yeah for sure that will help
yeah it will
ok ima ask it that way what is the difference between the jades and lekkers
Well sry man but I only think they do paypal
wait can i private dm?
- presses pay by card on the paypall pop up
lol
Sure
press pay with paypal than pay by card through paypal rather than being an actual paypal member
Well tell em that not me 
Already got mine lol

waiting on mine 
i cant dm u man
Guys if i tape mod my keyboard i obviously have to cut some holes for screws, right ?
Yes. Or do tap mod after screws on and take it on and off every time
Oh
Duct tape horrible
havent evennheard of em
GEON RAW HE Linear Switch 2pins Switch Type – Linear, LubedInitial Force – 27.0g / 36.0g / 45.0gBottom-out Force – 40.0g / 50.0g / 60.0gSpring Length - 15.0mmSpring Type - Single-stagePre Travel - 0.1 ~ 3.3mm (Analog)Full Travel - 3.4mmTop Housing Material - PCBottom Housing Material - NYLONStem Material - POMMounting
Heres my sound test
#🔧│keyboard_modding message here's CAM
Took forever for this to come in but I got it
Link?
Thank you and 60a tadpoles
Poschizo, listen
cheaper on aliexp
you can get it around 175 easily
and ships w/ jades stock
and you can case swap into a tofu etc
since its gh60 as well
this is the plan, reduce it to the bare module and install it in my build. preferably with a black plate.
if I liked split right shift I would cop but I hate the layout
Yeah should be similar with PC, Pom and pc are some of the best plates for frog
with the rest of the stuff, just build my girlfriend a keyboard lol
I'm hype, hope it all arrives soon
unrealistic
0.01mm 💀
Not bad, tax kills
Trash don’t buy
Also I would need to know where to find a black plate for it
Why do I like it or why do I like the layout? I like it because it comes with Jades, comes with a layout I like, comes faster than Wooting, comes cheaper all things considered, and is easily transplanted into my current build
I’m offended
which part? haha
All of it lol
Lol, it's not for everyone I get it
Nah I’m jus talkin smack
Honestly, let's see. It's in the back of my mind
with coins Ive seen it around 165 but sketchier sellers
but yeah its a good value prop - 8khz and socd and all that
just don't like the arrow key layout becuase I use right shift 😦
not bad still
I just don’t like it cause of the specs they portray and it’s Chinese OEM board basically
hemu is considered pretty top tier by a lot of the chinese/japanese markets
they used to sell pcb only for a while and drops would sell out in literal seconds
Yeah looks like no web based software and machine translated English, also sounds about as pingy as you can get and can imagine you get 0 customer support after purchase 😉
It’s also not Wooting so IDGAF
lol right
It’s a really good board. Features are different though, it has many features Woot doesn’t have and Woot has features it doesn’t have. It has had Rappy Snappy, SOCD and auto counter strafing for a long time though. You can see most of the features here: #1196356399437983794 message
Yeah. Obsolete
Yessss. Dude just messaged me about black ano aluminum plate for frog mini
Had to do it
Hey Guys,
I have an intresting problem. I use a Modded ROG Azoth with Drop Holy Panda X Switches as my current main keyboard. I now just bought a Wooting 60 module with alumaze and gateron jades. My question now is: Is it possible to give the wooting a tactile feel or make it feel more like my Holy pandas. I would love to fully switch to the Wooting but I think I will miss my Holy Pandas. My initial Idea was to switch the springs of the jades to something like 70gf springs, but I am not sure if this will make it better of even change the sound profile. Thanks for everybody that has an Idea.
Unfortunately HE switches aren't going to feel like MX switches no matter what you do
70g is on the higher side but if you want your fingers to be ripped it’s the way to do it. 😉 There are no (good) tactile magnetic switches yet sadly but maybe soon.
This is an excellent write-up.
Thank you for the read.
Am I crazy for wanting a UwU just to use as a play/pause, track select, and mute button?
Kind of haha
You’re welcome! If you have any questions lmk.
Okay, thank you. I was thinking of 70g because the holy pandas have 67g springs if I remember correctly . I guess I will just switch my keyboards, depending on what I am doing.
That’s what it’s for! What the fuck is OSU??? 🗣️🗣️🗣️
I wasted more money on dumber shit plenty of times
I've got a few incoming. Have you had a Wooting before? What exactly are the features that each other lack? What do you think both could do better?
Fuck that, don't do it. Invest into Intel when it drops
Oh I see, I didn’t know. I’d try it out honestly, most of it is trial and error anyway until you found what you’re looking for. 🙂
It’s only $60
that's 2 shares> of Intel
I couldn’t get an intel exec to spit on me for $60
Do you know what's going on?
What the mobo power limit thing?
@tawdry tree Still there?
I’ve used and tested quite a few boards. I mained the 60HE, then the 60HE+ for a couple years and recently switched to the Hm Xu. The Hm doesn’t have DKS, Gamepad mapping and Mod Tap but it has many other features. It’s easier to see in the screenshots than explaining. Hm’s software works but looks kinda outdated tbh. I also would like if it supported more switches, including reversed polarity ones and more depth based features like Woot has. For Woot, calibration and switch support too (despite supporting a lot already) and utilizing time based features like Hm does.
Doesn't have DKS, alright. Is that Dynamic Key Stroke? I forgot what that does. The HM66 doesn't happen to have Tachyon mode, right? Or is that not important because of the polling?
Yeah, Dynamic Key Stroke where you can bind up to four different keys to one basically (it’s a niche but can be useful). Yes exactly, the Hm doesn’t have tachyon mode because it doesn’t need it, similar to the 80HE. It scored a bit better on the latency tests so that can be an improvement point for Woot too.
Excellent, thank you for all the words. If I were to buy it, I'd love to help them out with some translation
80he has tachyon though right
Translation is actually almost finished in the latest versions. 😊
Hm, I’m quite sure I remember it being talked about during stream that tachyon wouldn’t do anything on a polling and scanning rate that high.
but I could be mistaken.
Nah that’s chill. Just don’t go Full uWu

Unless it matches your setup lol. Jk
Is this fixed?
Think you're right I thought I heard something about it but can't find anything
Nah, cancle is a classic, that’s never getting removed 😂😂
I think it was said in a stream. I vaguely remember it being talked about.
Hello does anyone have sticky rice switches or WS Dash switches? if so are they compatible with wooting ive heard they are
and whats ur opinions
WS Dashes are just a Jade recolor, so yes, they’re fully compatible. Sticky Rice (gen1/the 4.0mm travel ones) are not yet optimally compatible. There have been issues with those so I wouldn’t recommend them.
extremely helpful TY!
WS Dashes sound really good
ill go with those
are they actually just a recolour
nothing different?
For sure, if you like the colorway get them. If you don’t mind the color, Jades are often cheaper.
Yup, just a different colored stem.
Yeah
😂😂 Alright!
100%
YES! WS Dashes have a purple stem and Jades have a white stem.
That’s the difference.
why would someone make that change?
does it do anything?
im pretty new to modding
😂😂 To sell them for more.
lmao
It doesn’t, it’s just a different color.
jades are cheaper?
Many switches have recolors so it’s not that odd to see.
ahh okay
Very often, yes. They’re on sale on AE almost all the time.
AliExpress*
Yeah, depends where you’re from and if you don’t mind waiting a week or so.
On shipping.
yeah thats fine
They’re often around $35-45 for 70.
how many switches on a wooting 60E?
61, but you will find most being sold in packs of 35 or 70.
also do you have a link to the jades on aliexpress?
These are from KPrepublic https://a.aliexpress.com/_EQUTa4L
Yw!
Also when I buy the Jade switches
are they prelubed?
and if they are prelubed do I have to lube them again or nah?
I need to know what this new nozzle the Raw HE's are using for factory lube lol
it's so consistent
They’re all hand lubed by Geon himself. 😂
LOL we went over this already
😂😂
I mean at least he just a good spot to lube
Stem rails
Only spot he chose to lube i think
maybe housing railings?
i mean like shit, thats all he needs its smooth af and sounds good
yeah exactly
Can someone break SOCD down for an absolute dummy
I am restarted
No matter what I watch or read I do not understand
Pls
you press A - A turns on
you press D - D turns on and A turns off even tho you're still holding A
so no overlap in inputs
yes
but SOCD means you can just tap D and it turns off A for you
so makes it easy
so SOCD is Simultaneous Opposing Cardinal Directions, it's a way that games can determine how opposing directional inputs pressed at the same time work. The most popular that we've seen lately in games like val and most controller games has been neutral, so if you press 2 keys at once, you don't move anywhere. Then there's last input priority, which snap tap popularized, and has been a way that fighting games have handled SOCD previously, where no matter how long you hold 2 keys at the same time, whichever was activated last takes priority.
There's also absolute priority, where whenever SOCD is active, it'll default to a certain direction, like some fighting games default to UP.
Now I'm lost again
Fair enough, read your post

it's a way that games can handle A and D or opposing directional inputs like left/right on a D pad in games
sometimes if you hold both, you go nowhere, neutral. sometimes if you press one, A, then the other, D, you'll go right, last input priority.
Some of them when you press any combo of A and D, or W and S, up/down, left/right, you'll go up.
Snap tap uses last input priority, and that is the most popular SOCD for the wooting settings for games like cs2, val, ow2, etc
you'll notice in games when you active last input priority SOCD, and do NOT have the alternative behaviour switch at the bottom toggled, that if you hold one direction, and tap the other at a corner, you'll jiggle peak it super fast cause every tap will make you walk the opposite direction instead of just come to a stop, then walk the opposite direction
it's a lot more responsive, and you NEVER get overlapping inputs that result in a neutral movement input
is this a reliable jade switch aliexpress link?
just double checking these are the correct jades
that are compatible
Make sure to use the web based wootility for the beta, and make sure you’re on the latest one 2.9.1
Yeah I am using web based
And on : v2.9.1-beta.0
I saw the setting earlier
Now I just cant see it again for some reason
ur def not on the right site
it's this one
@paper crag ^
Yeah I just opened that and it work
But WTF was I on before?
Lol
the normal web wootility!!
so basically beta.wootility.io without the beta
Sound good?
kprepublic is legit yes
Anyone tried the Gateron Jade's? If so, how do they sound?
look some sound tests up tons of people here including myself have tried
they are quite well liked
but geon Raw HE is another good option
Sounds pretty darn good yeah I would say so, cable is okay, the pins ended up a very slightly bent but I straightened them out
@paper crag you should go here and read the pins #⏬│rappy_and_snappy
Nah I used it in an actual match
So I figured it out
In valorant it's pretty useless for counter strafing cause of the fact the game doesn't need that
However for jiggle peeking
It's crazy
hello, can anyone that has ordered the raw he's answer this question for me?
I live in the US. what would be the time estimate from placing the order of switches to having it on my front door?
Ik someone who ordered it from the US and I believe he received it in like 2 days
but idk if it's just a coincidence that he got it fast 🤷♂️
Could be abt 2 days
Nah not a coincidence
hehehe...I need november to come quicker
I need mah raws
But i dont wanna go to skool >:(
that's right too 😔
but atleast raw he will make me hapi

thank you, I will check them out
Cam you reckon the Durock V2 screw ins will fix my stabiliser issue with the space bar?
I receive raws, i happi, i receive AP CS summer assignments, i breakdown
hah, I got easy mathematics!
(that's not a good thing my life is just easier)
I wish life was easy 
Even tho it shouldnt
buy lekker since, the jades are made for a higher mahjong sounding clacky experience so its high pitched, look for guides that help you make your KB "thockier" as that is a deeper sound profile, lube your switches and springs, lube stabs w thicker grease, do holee mod, tape mod, lots of foam or other ways to fill in the case, use abs case, use deskmat to dampen further, the desk you type on will also affect the sound
I love thocky sounding so when I hear a very light keyboard it just doesn’t sound like it’s worth the money lol
But preference obviously
@fluid ravine btw do you feel any performance diff from switching from lekkers to raws?
What are you getting from the collection? I'm thinking keycaps, artisan, cable and of course international kit
how are these switches guys https://keygem.com/products/black-knight-magnetic-switch-10pcs
Enhance your typing experience with the innovative Black Knight Magnetic Switches. Featuring magnets that replace traditional springs which allows smoother and more durable typing. Made with high-quality polycarbonate and nylon materials, this Linear Hall Effect Switch is a innovation every keyboard lover has to try.
yeah they work
worse or better then jades in terms of stem wobble and stuff
I wouldn't know, I haven't heard read many things about it
I think I heard a sound test once I believe they are a lil on the deeper side of sound
yeah but im thinking wich i should get bc i like deepers sounds but also the jade sounds
wich would be a safer choise
@polar girder can you send a sound test of your black knight switches on the wooting?
thx man
time to find it 😂
thanks 👍
how was the prelube on them?
Jades have better tolerance imo
Factory lube is good on Black Knights
OK THANKS
They oil
I didn’t lube them
Just bag oiled the hell out of the springs
But also swapped springs
Yeah I don’t have jades idk
oh ok so you also think the jades wil be a safer option
I didn’t say that
I have no interest in jades
I would say go Raw for closed bottom or black knight for open bottom
And if you don’t know then just get Raw lol
ok
Not sure yet, if I can get it in Canada I'll likely try to get the cable too, but I doubt deskhero will have the cable too so might just grab the keycaps for now
He do
yes they do
Bro sells everything
Ty lads!
Reasonable price to. Sweet
ya maybe i wont buy this shit on amazon anymore
i bought a two in one switch opener for like 13 bucks
i have the case and switches coming in tmr but now i just need the 60he and the keycaps
hey question in regards to the Sticky Rice. In the FAQ, it says they overload the sensor, overloading the sensor means what? Could it it damage the board?
no damge but they just dont work well
they basically oversaturate the sensor so you dont get good accuracy
ie the magnet strength gets too strong too fast so you cant tell that you're not at bottom
ahhhhhh, ok that makes sense, thank you for the explaination!
yeah so sensor will read at max too early
thats about it
they kinda suck - I have some
I would avoid
and they have huge variances from one switch to another
thank you. I literally got the Sticky Rice and Geon Raw today and i liked the way the sticky sounded but damn, these Raws are just 🤌🏽
the raws seem really good I just ordered some
sticky rice I was a bit dissapointed in personally
I had to swap a bunch in and out to get them all working ok-ish
i even have their closed bottoms and same problem
there's a closed bottom?! Did you lube them?
probably not worth it if it gives you issues anyway, you'll be happy with the raws. I have the holy 60 coming in on thursday, so i cant wait!
they are hard to get though I ordered via factory rep
oh wowwww
sick
iirc these are called glutinous rice if you translate
open is sticky rice
just ordered a wooting 2 he, does anyone have tips on what to look for in keycaps? only thing i have in mind is something pretty probably a gradient
at least thats hoiw su68 firmware says it
ty, im curious now lol
Anyone with a pc plate able to tell me how the foam replacement (I think it's rubber)
Makes a sound diff?
thanks!
Makes it more muted I find
Lowers the overall tone of the keyboard
I prefer it
Fantastic I gotta tap in
You got any foam in there?
Was thinking to go stock foam with that plate
Maybe burger mount but idk
Tofu case foam
That thin layer?
My 60he is friction mounted with silicone pcb sandwich and tofu case foam
The one that fits super snug over all the screw mounts?
Yep, and I also used some medical tape to further dampen any contact the case has
Like putting it over all the posts and the tabs around the edge for the foam
Ye I was thinking that too
I might even get some foam in my space bar
If I'm being honest
Also did this, makes a fairly noticeable difference
Might go back and do a better job on that
A dab of hot glue
no plate foam, fr4 plate, Raw HE switches stock, tofu with case foam, oring friction mounted
That thing is LOUD
yessir, not quite as loud as the salvation behind it but without the plate foam I get a lot more bounce and sound from it
My build with dashes is fairly muted
I want raws 😔
yeah with the poron plate foam mine was pretty muted too I found
I have a blue yeti so I can't really record a good sound test

it doesn't sound too loud irl
the blue yeti should be decent
better than a phone anyway
Nah mine is old and abused
lmao
It sounds so shit
tbh I dont think it sounds that loud
People who switched from Jade to Raw HE is it worth the change ?
It's way louder than my build for sure
Video could be boosting it ig
yeah it doesn't sound too loud on my end
not sure tho
irl it's def not loud loud
I can hear it but it's kinda muted
On my phone it sounds very loud, probably just the vid
I get mine in three days🙏🙏🙏
I need a sound test when u get them!!!
i cant provide that yet cause i have no case nor a module😭😭
dang 😂
what is this app ?
Shop
Looks like Shop
Shop
I used to use the shop app, but the way they send me a text code everytime I open a checkout page online or on mobile drove me nuts so I removed my number and deleted it lmao
I have almost every tracking app anyway but those texts drove me wild
see i have it so i dont have to put my card details in so i never have to look at the price im about to spend for more than 5 seconds
lmao I use google pay for that but I feel you
makes me more irresponsible
what does the app do ? does it just centralise your paiment and Delivery status ?
It's almost time for X-ray

ya pretty much
7pm?
oh ok sounds kind of useful
I'm waiting to see when/how deskhero gets it, omnitype shipping isn't the best for me
Shop is helpful but it’s VERY invasive
ah okok
It hilarious cause Deskhero is actually faster than Omnitype for me, and Im in CA (California, not Canada) 
those are pretty nice ngl
I'm in Texas v.v so I don't know which is faster for me
im in canada so im suprised things coming from china and korea are this fast rn
well tbh
No taxes either
its just across the north pacific ocean
so i can see why the shipping is fast
im just worried abt the import fees
hopefully i dont get any🙏🙏
ah ty !
deskhero is Canadian so def omnitype haha
I just want to avoid paying extra shipping and duties
I wish Divinikey would stock the Raw he
I'm surprised they haven't popped up elsewhere yet
I see them on one random japanese site
nowhere else besides geon yet
i guess for popularity maybe🤷♂️
This should line up pretty well with my official list - https://note.com/fafa_imoshi/n/n797ff0386731?sub_rt=share_h
はじめに みなさんはじめまして。ふぁいもしと申します。 記事をご覧いただきありがとうごさいます。 まとめ記事を作るのは今回始めての試みになりますので、ご意見やご質問ありましたら遠慮なくご連絡ください。 まとめ記事を名乗っていますが、かなりの量の内容になってしまいました。 すみません…。 互換ごとに使えるキーボードの種類が存在しますが、例えばGATERON KS-20互換であっても、PCB(プリント基板)の作りによっては使用できないキースイッチがあります。ご注意ください。 wooting 60HE、HM66はKS-20互換です。精度や安定性を除けば、1,GATERON KS-2
or for like exposure to the geon site
Noob question, how do I know what key caps fit well with my 60he, as in properly onto the switches
MX stem keycaps
Make sure it covers 60% layout
Less is MoreDIY Magnetic Switch Keyboard MelGeek has always aimed to express a multitude of concepts through its designs. After several series of product development, we decided to create a classic and minimalist product. Embracing the "Less is more" design philosophy and considering the ambiance of the desktop, the MA
I wanna try these but I can’t find them for sale on their own yet
is this just like another competitor pretty much
based
But then you have a $70 paperweight
Opaque housing is atypical
ima wait for made68 pro and pull the TTC switches out of it
I’m curious
just buy some new switches and slap them in there
Thanks mate
I've been looking for sound tests of the TTC's but no luck yet. If you have some please lmk
Got a few paperweights hanging around now
well im guessing youll only find them on that site maybe
I’ve only seen someone using them in a tester in a loud environment 😦
I gotta get a pcb for my poor tofu60
But I know some folks have ordered from taobao so hopefully soon
Same
is divinkey have better shipping for you? they have x ray line release same time as kbdfanbs website.
deskhero was listed as a retailer for Canada, they just don't seem to have a page up yet. I'll double check that and omnitype if it doesn't show up tho
These should fit the 60HE since they're 1.6mm pcb compatible right?
some people have had issues with them fitting the wooting pc plate, ymmv
Ahhhh
tyty
rest in peace my wallet im getting import fees for my switches and case


60 dollars like that
if my GMKs get hit with import fees now thats really gonna hurt
I saw they dont have listed up yet at deskhero. diveinkey is in cali not sure if they be cheaper or not
If it’s by Kailh it probs don’t work tbh but we’ll see
i know
Highly doubt it would work
look at the magento you can replace whe magnet housing with like 8 different types of materials to change the sound
Interesting concept for sure
its crazy its a 2 piece stem
My thoughts exactly
It has a protruding stem on the bottom
Same reason KS37 switches don’t work basically
Wonder what the chances of avoiding import tax is for the Jane 
You think customs is clued up on custom keyboards
Probs
Yeah they opened and checked my frog mini
Yeah I feel like they be opening up my switches sometimes
Just praying they don't drill a hole in my keyboard like that one guy
thats just wrong
Speed holes. It’s all good. lol
@harsh dove did you go with the Jane or Kohaku for your Rubrehose pick?
I ain’t even get an email
It opened yesterday. I'd check your spam
I never got an email
But you can fill out the form here https://forms.gle/baF4ArVm1U9PhBDB6
Access Google Forms with a personal Google account or Google Workspace account (for business use).
what is this abt :0
Expensive group buy 💸
o
the xray keycaps on divinikey when converted to CAD are 145$, from 85$ USD?
85$ USD is 118$ CAD lmao wtf
I hope to god deskhero drops them tonight
good luck on those rubrehose
dam thats crazy
I love being Canadian 
Oh wow lol
How do I select what key caps I want when buying the keyboard?
what keyboard r u buying
60HE+
did you make an account using the same email during purchase?
So what'd ya pick
- Keyboard of the month - 2024 July
- Project Rubrehose
- Project Status
- Matching Keyboard Timeline
- TGR Jane v3 Rubrehose Edition & Rubrehaku review
- Horangi 60 GB Extended
- TGR Lena Wrist Rest Update
They had a livestream showing both prototypes
Yes
it's not in your orders?? 
No
Oh it just popped up
ah ok nice
Give it like an hour
Fair I'm picking the Jane for the same reasons 
Nice, then we can trade with each other
lol
I've been putting off buying stuff for the last month or two just to save up enough 
I wanna get whatever the stinga60 is prefer 60% over 65%
But umbra and f2-60 also coming out soonish
Umbra seems nice
Artisan pads can take 6weeks. Ugh.
Yeah their popularity has spiked recently
He partially used your list so yeah 😅
I’d think this is accidental. Why the waiting list if it’s just on sale on AE 🧐
Oh well that makes sense lol
You’re open to a few corrections or not really? 😉
Always up for corrections! Accurate verified data is the goal
Just start a group chat with me and Cam as he also has edit access
Hmm, you’re in a gc already or a new one?
Apparently there is now a us retailer.
I'll see if I can add. Driving give me a sec
is it this?
Yes
oh that's nice
Very. Quick shipping to. Reasonable prices too. Not like Amazon
What artisan pad u getting
if I did get one probably the hayate otsu?
That one ☝️
I think ima get a hien one day
I don’t mind rough texture
I can also use that deal artisan has
tbh im not that much of a competitive gamer so I dont think I'll be getting an artisan anytime soon
I want like 4 different things but I can’t afford them all. Decisions decisions…
what's the full llist? 
I got an op18k from @polar girder
I like textured pads cuz the real smooth ones feel like they get muddy to me
oh nice hows it feel?
Even tho I don’t sweat
I really like it. Fits me well.
nicee, I want it since I claw grip
hmm
I think you can narrow down raw switches for now
I palm and it works for me
maybe wait until it has a US retailer
Isn’t the uwu on sale rn
Yes until the 4th
I wanna use it for Muse Dash
even if you didn't ask me
Volume, play/pause, track forward/back, mute microphone.
lol.
what is the best switches to switch to
ahh so as a macropad
I think I heard of that game from my friend
Yes pretty much
aight so we're down to mousepad, uwu, and a case 
The kbd case doesn’t even ship until August so I might just wait
Hopefully I won’t miss the preorder
UwU might be the deal but I think you can get a macropad for cheaper with more keys
but UwU is pretty cool..
I want to stay in the ecosystem
then might just go with the UwU since it's on a sale rn
That’s the plan
Are your springs still on time? @quiet bay
yeah it says they're going to be arriving on time
Sweet
Can't wait for my stabilizers to bounce back up so quickly 🤣
I wanna see how heavy they really are 
It’s nice
Pretty damn heavy. It’ll surprise you
You know the other springs will show up right after that. lol.
Nah..no way
I bet they do
im happy I won the UwU
although I didnt rlly expect it
but I got another member to the family right beside my 60he
That’s sweet how’d you win it?
wooting did a giveaway a little while ago iirc
#📣│announcements message i think it was this one
I want this one.
I’m not a fan of the white one
UwU
I wish it wasn't a cream color tbh
I occassionally play Osu with it...
but im ass 
I started playing Osu because I got the UwU 😭
I just want it as a macro pad. My Dac/Amp is far away and the Wooting has no controls. Plus I can’t be bothered with layers. UwU solves all of that
dont you get free key caps as well?
ye
okay but i lowkey wanna buy it now for macros
instead of always tabbing in and out of spotify
like its actually so cute bro what😭😭
X-ray Collection The X-Ray Collection is a set of minimal translucent tech peripherals for your desk setup. Scroll down to learn more, and find your local retailer to purchase from. X-ray Keycaps X-Ray is a keycap set that features a clear and white, low-contrast design, paying tribute to transparent tech peripherals
You know we gotta get the micky backpiece
The artisan sold out 
Ohhhhhh ok 
I don't know why I'm even complaining lol the artisan is almost as much as the base
guys correct me if im wrong
but the wootility still reads the jade's full press as 4mm right?
just change it to be 3.5 or higher
but just with a 12.5% error
You can order from Omnitype and the Artisan is in stock
Yeah just seen that lol
I got cheaper shipping on Divinikey
as in issit that the whole 0.5mm is not there?
You getting the Artisan?
or is it just a 12.5% error thoroughout
Ohhhh
The X-Ray cable is an original design with a unique soft-touch translucent silicone cabling with white shielding and conductors on display. The USB shells are made of a custom-designed die-cast copper alloy housing, which are bead blasted and finished in matte silver PVD. The connectors feature a knurled grip and its s
The cable looks cool
oh its a whole set?
yuh
“The design for X-Ray keycaps comes from a combination of three things: the nostalgia (and resurgence) of the transparent tech trend from my childhood, my current obsession with translucent polycarbonate keyboards, and my appreciation for minimal design aesthetics.” - Matthew EncinaFounder & Creative Director at Mo
looks sexy
damn that looks nice
figured out my screw thing
sucks tho, divin/omni want to charge me minimum fir anything 60$ AUD express aha
the top 5 in my board r P-00??

id rather get the more expensive products, with the cheaper shipping in country
That's fair
yeah this shipping kinda sucks
for just 1 set of keycaps
I think I might wait and see if deskhero does drop them
there's a sale on dualshot here too I could get them for the same price once I factor in duties and shipping lol
?
Did you end up finding keycaps you like?
is this is true, isnt it just a 12.5% error throughout?
for the wootility
Yes
Wootings actuation isn't based on the distance
I can set my dashes to 4mm and it actuates right when I bottom it out
ok thanks
i really tried to convinve someone this
but they just didnt believe me
I saw
even when i showed them the talks with the wooting team
Although I cant regurgitate the info clearly, I was told by multiple staff members about this
The actuation points are basically a % thing
Fuckkkkk
they said 1 month delay on discord for deskhero
Fuckkkkkkkkkk
I guess I'll wait tho lmao
I don't need them rn and just got 2 new sets recently
lmao
RIP
kinda works better for my funds anyway tho
as long as I know they're getting them eventually
Need some pics of x-ray on a white tofu
Depending on how they look I might take them over pbtfans BoW
not sure if theres any
So September?
Hopefully someone with a white tofu picks them up and posts them here
yeah likely
cosmos said they're looking at Sept/Oct
so likely Oct
but I'd just rather get them locally, they said they might do a pre-order before then as well
ahh I'm so tempted to order them tho lmao
Ikr
Cafege is stocking xray, should be up on their site later today
I just know at some point there’s a chance I might regret it. And I just can’t let that happen lol
my only thing is atleast I know they're coming to a site here
just debating how bad I want them earlier lmao
Prob limited like other pbtfans sets
We might see r2 in the future tho
With its popularity
Dave you're the one with the PMM mouse right?
no sir
does anyone have a geon raw he vs gateron jade soundtest
what case and foams and shi?
the raw sounds a little lower pitched to me than jades i like that
Yeah, they are
this was my tofu with plate foam and case foam
this is no plate foam in the tofu
abs keycaps
I honestly thought the RAWs would be louder cause of the bottom being semi-open but I was wrong
agreed
I think because the sound is more refined and cleaner than the Jades, that it doesn't sound as loud?
ooh i like
good to hear that's the main thing i was worried about
maybe there's something to HE switches not having that center hole in the PCB
so they never really get like hmx loud?
not sure
the loudness they can often have just comes from spring noise on top of other sounds I find for other HE switches
what's the difference in feeling between the two?
the Raw He feel a lot better personally, I can feel the better tolerances when typing/gaming etc
W
awesome
Yeah but you can remove it if you like as well to see how it sounds
can always remove them too if i don't like
yea
perfect
the HE boards are generally easier to remove that stuff too
like I'm sure you can just open the case, and separate the pcb/plate easier cause it doesn't secure into the pcb like mx hotswap
so you don't have to remove each switch each time you change/remove/add foam
prob just have to unscrew the standoffs assuming the 80HE also uses those between the pcb and plate
yup that's solid lol
fuckin love ios notes dude
that's the one part i own already lmao
hahaha figured
i like it.
the ultralight weight is a real nice experience
but the m3k/dathper frame i have now is unreal
boosted my performance lolz
Do you play shooters with it, I'm kinda interested in getting one

for me
