🔧│keyboard_modding

[prime orbit]

I won’t get scammed lol

[tawdry tree]

You can get that later as well, you get a black and yellow cable with the module

[prime orbit]

Hmm ok

[tawdry tree]

Those are correct

[prime orbit]

Bet

[tawdry tree]

Not sure if the tofu was cheaper from kbd directly tho

[prime orbit]

Not after shopping

Shipping

$30

[tawdry tree]

💯

[prime orbit]

Crazy

[tawdry tree]

lmao

that’s what you get when u ship heavy shit

😂😂

[prime orbit]

I could get it on divinikey tho

[tawdry tree]

you can check there

[prime orbit]

Actually might be cheaper

[tawdry tree]

cheaper?

yeah it is

[prime orbit]

Yeah by a little

Bet

[tawdry tree]

can you order before your phone dies tho?

😄

[prime orbit]

I have my charger next to me I’m just in the hospital rn and don’t feel like moving lol

[untold wigeon]

I have an XDA set. I like them. Looked really nice on my keeb.

[untold wigeon]

ducky one 3 case -> kbdfans 5 degree soon

mistakes were made..

[stuck plover]

LTC LavaCaps PBT Double Shot108 Keycaps Set, Cat's Claw Sublimation OEM Profile for ANSI US Layout 61/87 TKL/104/108 Keys Mechanical Keyboard

Hiya can someone tell me if above keycaps are compatability with wooting

[hard moon]

any keycap that follows Cherry MX stem standards is compatible

which is like 99% of the keycap market

[daring helm]

Would nicepbt keycaps have interference with the wooting 60he+

[stuck plover]

Oki doki thanks

[umbral spade]

has anyone tried a build with the keebox rt60 from aliexpress?

[honest spear]

Hey ! I'm planning to get the 60 HE+ with alumaze60 case. I've never built a custom keyboard ever so that's my first. I would like to make it the most silent and quiet as possible, so I'm wondering which switch to take (are the lekker vs2 coming in store any time soon?) and what can I do to make it silent ?

[daring helm]

has anyone tried a custom cut out pe foam for the wooting?

like it cuts the part where the hole is

[daring helm]

something like this

[limber niche]

any recommendation for stabs? Im going to install Jades switches and i know that maybe the stock stabs give me problems, so i want to buy some in case i get problems with the stock stabs

[daring helm]

you wont

just tune them

add krytox 205g0 on housing and dielectic grease/krytox xht bdz on the wire

[daring helm]

but if the stock stabs are that like no matter how you tune it, I recommend something like the TX AP stabs

[little glen]

that is not the issue with jades and stock stabs

[daring helm]

ohh yeah...

its long pole

but it wont really have problems

[little glen]

jades have less travel so the stabs have too much travel

so spacebar will be wobbly if you dont use other stabs

[daring helm]

I dont really have problems on long pole switches on normal stabs tho

is the wooting different?

[limber niche]

yeah thats what i read from some jades users

[daring helm]

(I never owned a wooting keyboard)

[limber niche]

do u have any recommendation?

[daring helm]

TX AP stabs

[little glen]

i do not know which stabs are best for this sorry

i just know there is some issues and you have to use other stabs

[daring helm]

if it's some users having that problem

it might be a keycap problem

[limber niche]

Im mean any stabs is "the best" it depends on the user but its okay i would try the TX AP Stabs

[glossy pagoda]

This is only the case for some specific keycap sets, tending towards lower quality sets with larger manufacturing tolerances. However, if you buy Jades from our storefront, 70 pack or 90 pack, we include a dozen or so stabilizer stems to ensure compatibility with all keycap sets

[daring helm]

i knew it

Im waiting on the 65he that will probably come in 5 years lmao

then i might consider buying a wooting for once

[little glen]

doubt it tbh

since 60he and 80he exist

[limber niche]

didnt know that, i was about to buy them on a spanish website so i get them sonner

[daring helm]

noooo

[little glen]

before they do a 65he i think they would rather to two he refresh and maybe a numpad or some other device before moving on to whatever comes after

[daring helm]

arrow keys is just a must

[glossy pagoda]

Skill issue

[daring helm]

but i dont like 80he layout

[little glen]

80he looks good

[glossy pagoda]

I've gotten so used to using the fn layer for arrow keys that I also do it on my 80HE...

[daring helm]

but i like it in the same time

its just better in every way

[sweet oak]

Your body has adapted, but at what cost?

[daring helm]

40% wooting when

40he

[little glen]

ortholinear layout when

[daring helm]

no numrow

[daring helm]

hmm but i think its possible

basically just and updated version of 60he+

with 8khz

and an actual

arrow keys

and gasket mount 😳

[little glen]

i think they would just make it a 60% not a 65

[daring helm]

at this point

why not do it like keychron

literally almost every possible layout

[little glen]

cost

[daring helm]

just let me hope at this point

I only got the 3he

[daring helm]

Anyone?

[daring helm]

I dont know if theres a silent hall effect switch, or even if its possible

[glossy pagoda]

We aim to make impactful products that drive the market forward

When one considers the amount of time it takes to design, develop, and commercialize new keyboard products, we have to be picky in what we work on

Shameless plug: We're hiring for tons of engineering, industrial design, design, and developer positions
https://wooting.io/careers

[daring helm]

But if quiet’s your thing, stuff that with all possible foams and get something like a keyboard deskmat, but if you already have a mousepad thats fine too

And lube the switches

Lubing makes it sound quieter

[honest spear]

So many people are looking for a properly silent and quiet keaybored

On the very few choices of HE switches, isn't there any of them more quiet then the others ?

[daring helm]

Probably, but I dont think it will make that much of a difference

I think Gateron Jades/WS Dash are on the clackier side, hence, louder

While the Black Knights are deeper which means its quieter

But you cannot get to the same level as normal silent switches

[daring helm]

Theres just no such thing as a silent he switch yet (correct me if im wrong)

Maybe keycaps can do the trick tho

Cherry profiles are quieter

[honest spear]

Thanks for the tips, I'll check these Black night switchs... !

[torn summit]

Yo i'm SOO late but I finally bought like half of the setup, bought the wooting recently and it arrived in under 3 days and yesterday my tofu 60 redux came and i set it all up, all I need now is the cherry taro keycaps

[untold wigeon]

Looks nice. Very clean

[torn summit]

first ever mechanical keyboard btw and i'm happy with it it feels SO nice to type with it

[torn summit]

thank you man ! Im also happy that it looks clean, cant imagine it with the keycaps

[untold wigeon]

It’s an endless cycle. You’ll never be satisfied lol. Happy spending!

[torn summit]

ahahah thank you for the warning, funny you said that cuz i'm also thinking of buying a coiled cable one day or another 😿

[regal adder]

Anybody got any cool futuristic keys that I could buy and are compatible with wooting

I am like completely new to this type of stuff

I have the full keyboard

With numpad

[untold wigeon]

Look on Drop. Always neat looking stuff on there. @regal adder

[void tundra]

So I'm new to modding and I was thinking of changing some things and I had a question, in particular with the switches. Is it worth to handlube the switches or just keep it factory lubed?

[harsh dove]

Photo Credit: Narisa

[harsh dove]

Hand Lubing is worth it 90% of the time, just need to set time aside to do it

[thorn zealot]

Like why

[median spade]

Have you tried not living in Europe

[wind karma]

just got new better quality caps and they sound worse to me actually lol

the old ones rattled more since the stem wasnt as tight but it sounded creamier and deeper... wtf

[daring helm]

It’s technically not mechanical

Technically and literally

[velvet cipher]

is foam mod good for wooting two he?

[daring helm]

Foam mod is always good

[median spade]

foam is good if you like foam

[harsh dove]

< Foam Hater

[daring helm]

Foam is good when the keyboard sucks without it

I only keep one foam board

How would a foamless wooting even sound like…

[thorn zealot]

Not yet

[velvet cipher]

doesnt it just make it more creamy?

[velvet cipher]

u dont like creamy sounds?

[thorn zealot]

No

[velvet cipher]

??

wat does it do

[thorn zealot]

Foam

[harsh dove]

#🔧│keyboard_modding message

Like this

aka way better

[daring helm]

Even wooting can do foamless ig

Is there other mods you did?

[harsh dove]

It's in a Salvation case w/ Gateron Jades, Carbon FIber Plate and GMK ABS Caps with Burger Mount

[daring helm]

Mannn

[cedar gate]

Makes it a bit thockier and quieter

[daring helm]

So you have to spend more

[harsh dove]

You can make it sound good without breaking the bank

[daring helm]

Most people who are new to keyboard would typically like a deep sound

[harsh dove]

Yessir

That is a common theme

[daring helm]

The common theme is the more you go deep down the rabbit hole

The more someone would like a clacky sound

[harsh dove]

Yeah that's exactly what happens tbh lol

Go from Thock to Clack

as you learn more

[daring helm]

But i honestly dont even mind thock or clack

[harsh dove]

Yeah I like em all respectively

[daring helm]

Why not buy two keyboards that do them both respectively

[harsh dove]

I just don't like super foamy sounding boards

[harsh dove]

I did lol

[harsh dove]

#🔧│keyboard_modding message

My tofu build

[daring helm]

Thats the wooting?

[harsh dove]

Yeah

[daring helm]

Whats the switches?

[harsh dove]

Still Jades iirc

Yeah theyre Jades

[daring helm]

I dont own a wooting keyboard yet because I cant spend that much money (yet) but I have two keyboards thats clacky and other is an HE keyboard that I could say is deep sounding

Both of them in total would cost around 170 dollars

I just need new keycaps tho

[harsh dove]

Sell both then buy a Wooting lol

So you just have an UWU?

[daring helm]

Yeah

[visual sonnet]

did i overlube my switch

[daring helm]

Nah

[calm pulsar]

just the right amount

[daring helm]

I think you lubed it with love

[visual sonnet]

yeah, i chose the cheap way out

[thorn zealot]

Looks a bit dry to me

[harsh dove]

https://tenor.com/view/thumbs-up-internet-computer-good-funny-gif-3551491

[daring helm]

Heres how both of them sound

[calm pulsar]

pro tip: fill the whole keyboard, including the whole case cavity, with lube
this way the lube will not break in and there will be no need to relube

[untold wigeon]

@calm pulsar @quiet bay here is my attempt a quieting down the Cerakey spacebar.

Before and after:

@fluid ravine @sharp vigil

[daring helm]

Would be around 225 if I bought them without discounts and didnt bought the keycaps second hand

[visual sonnet]

i wish my keyboard screamed instead of thocked

like a shriek

[hard moon]

that's actually possible, not sure if via supports Wooting keyboards tho

[visual sonnet]

how is that possible

that shouldn’t be

[daring helm]

Via doesnt even support hall effect anyways

[visual sonnet]

that’s physically not possible

[glossy pagoda]

When I press the middle button on my UwU it plays a sound clip of Calder saying UwU

[hard moon]

lol

[calm pulsar]

sounds quieter now for sure
are the rest of keycaps different on 2nd build?

[cedar gate]

The lower housing looks dry

[dapper kernel]

search duck keyboard

[polar girder]

What switches are those?

[cedar gate]

How much for your uwu?

[visual sonnet]

the one by hipyo

i know that

but i’m talking about switches

like when actually typing, the sound shouldn’t be a thock. I want it a scream

[dapper kernel]

u mean sound from impact?

[glossy pagoda]

$150,000 but then you'll also get me personally delivering it to you by hand, anywhere in the world where there are public roads

[untold wigeon]

Cerakeys B set in yellow.

[untold wigeon]

WS Dash

[cedar gate]

Can we get that down to 69 and I'll throw in an extra mark for free (he's locked in my basement)

[glossy pagoda]

I don't come at a discount

[daring helm]

What about just you…?

[untold wigeon]

@calm pulsar I was trying for a two tone look but it kinda missed. They didn’t look this hyper yellow online. lol.

[daring helm]

Without the UwU

[glossy pagoda]

I'd do that for a mere $146,500

[cedar gate]

Sure just usps it and put the original Calder in the box

[glossy pagoda]

gets lost in transit, company collapses

[cedar gate]

So he can spam uwu when I play osu

[cedar gate]

I'll play full price of Calder sings that violin song when I play osu!

[mellow leaf]

add more, that aint alot, until this amount

[quiet bay]

oh you got rid of the pinging sound

[hard moon]

@marsh juniper may i get some personal support? Because i don't get how that stupid ass MSKLC program determines Alt Gr. Mapped all the Umlaute and stuff the way i wanted, installed the msi package and now it refuses to work. Right Alt key still works as Alt only and not Alt Gr

and even when i hold Alt + Ctrl nothing happens

[marsh juniper]

Just to check, if you make any changes, do they take effect? For example, mapping [W] to [A].

[hard moon]

lemme build the dll quickly

nope

W and A still keep being W and A

so i guess it's Windows being a dick rn?

nvm, fixed

i had to go to preferred languages and remove everything that isn't the layout i want

[prime orbit]

First step done

[harsh dove]

999 More Steps to go

[prime orbit]

Yes 😭

But they gave me a good deal on the switches

Had to take it

Next will be the case and Brass bar

[polar girder]

Yo at these roller MX switches sweet?

[prime orbit]

Then the wooting stuff

And build

[polar girder]

What does it add?

[harsh dove]

The ones with the ball bearings?

[polar girder]

Yeah

Are they sweet

[harsh dove]

Didn't hear great things about them from people who tried em

[polar girder]

Gotcha

They’re curious but I haven’t checked them out

HE only noob gang

[prime orbit]

Next paycheck

😭

This one might be 2 paychecks 😭

[polar girder]

lol yeah it adds up

[prime orbit]

Sad times

[polar girder]

Don’t need the PC plate and the module unless you want the black over the white tho

[prime orbit]

It’s only $10 so I said why not

[polar girder]

$10 tho. Lucky

Yeah

[prime orbit]

And yeah I’m going all black

[polar girder]

Gang

[prime orbit]

Gonna get the black cable too

Eventually

Don’t need it rn

Also the included foam is fine right?

I don’t need any after market foam or something

[polar girder]

Yeah

You can play with diff case foam/materials if you want

[prime orbit]

Eh

[polar girder]

Like polyfill or kilmat or nothing

But plate is either the poron foam, silicone pad or nothing

Module comes with both

[prime orbit]

Which one is better

[polar girder]

Personal preference

[prime orbit]

Which one sounds more thock

[polar girder]

Would recommend to try all three honestly

[prime orbit]

Or gives better performance if that’s a think

Thing

[polar girder]

It’s not

Unless you friction mount

[prime orbit]

Just sounds?

[polar girder]

Then they can sort of affect fitment

Yeah

[prime orbit]

Then I guess more Thock

Which one should I do

[polar girder]

Idk I’m still TBD

And I’ve used all three: foam, silicone, nothing

[prime orbit]

Fair

I guess I’ll just have to wait

[polar girder]

Yeah it’s really just about experimenting and seeing what you like best

[prime orbit]

Bet

I’ll lyk in 5 months when it’s finished 😭

[polar girder]

Yo how long hypekeyboard plates usually take? @harsh dove @median spade

It wanted me to download Route to track but I can’t

[marsh saffron]

Cutting my silicone insert to work with friction mount was one of the best things I've done

[polar girder]

And idk if Shop is accurate

[marsh saffron]

It sounds so much better to me

[polar girder]

Nice. Yeah that seems solid

[thorn zealot]

i heard the poron foam plate pad is more thockier

[prime orbit]

Hmm ok

[thorn zealot]

im just gonna wait for the new silicone friction mount pad

are the 1st 4 just types of plastic plates

[polar girder]

Well there’s the fact that material absorbs certain sound waves

But then there’s other way it can change the sound too

So while foam might make it slightly lower pitched, you might not like how the foam sounds

Like nothing definitely sounds the cleanest IMO

But not the quietest or thockiest

[hard moon]

PETG definitely is plastic, just not sure about IMA, because Google gives me stupid, unnecessary shit

[thorn zealot]

alr

i mean i was gonna get one of the metal ones anyway

just curious

[hard moon]

i don't give a fucking damn about the IMA group... tell me what IMA as a material means... god damn it, Google

i fucking hate it for bullshit like this

[marsh saffron]

Could refer to this maybe?

So it's probably plastic?

[hard moon]

seen it too, after scrolling for like 10 minutes

and yeah, it's plastic. There's no metal that can be clear

[median spade]

My house is across the border relatively from him so would legit be a day on average

He ships outta Toronto with UPS Ground

[polar girder]

But like how long does it take for him to make it?

I’m also right across the border from him then

👁️👄👁️

[polar girder]

Yo if anyone gets stem swapped black knights LMK

with lekker stem

Or anything really

@stray tiger you have any intentions with these black knights?

[fluid ravine]

AFTERNOON MODDERS

[polar girder]

What’s up, big mod homie

[polar girder]

Stem swapped black knights? 🥹

[fluid ravine]

:0

Wait which one is black knights I forgot LMAO

[polar girder]

Gugu

Black nylon bottom, black transparent PC top

Box stem

https://kprepublic.com/a/amp/products/gugu-black-knight-magnetic-switch-linear-for-magnetic-mechanical-keyboard-pc-nylon-pom-55g-pre-lubed-for-wooting-nuphy-rakka

Wish it was nylon top tho NGL

give me opaque. It’s fine.

Not EVERYONE needs RGB gamer mode

https://tenor.com/view/sad-cat-sunakook-tired-exhausted-gif-24687868

[fluid ravine]

Bruh another PC top :/

Like it looks nice sure but why :///

[polar girder]

Ikr

[prime orbit]

What’s wrong with it?

Don’t make me regret my purchase plz

[polar girder]

lol nothing wrong with it

Don’t regret

[prime orbit]

Ok

Scared me

[polar girder]

I’m just looking for a very particular type of switch

[prime orbit]

Fair

[polar girder]

Black Knight is tempting tho

I like all black

[prime orbit]

I just want black everything

[polar girder]

Same.

I want this for HE bro

[brazen sparrow]

oil he

[fluid ravine]

Yeah there's nothing wrong with it at all, it's just that majority of the HE switches have PC top housing

[prime orbit]

Ah gotcha

[polar girder]

Yeah any others than Raptors with nylon tops?

[rich cape]

What would the prefered material be?

[prime orbit]

Just found this amazing item on AliExpress. Check it out! $15.90 | G-Square-Studio Black Warrior Magnetic Crystal Switch Trigger Adjustable Key Stroke Wooting Magnetic Axis Keyboard Switch
https://a.aliexpress.com/_mL68aVa

Uh does this not look like the black knights?

[fluid ravine]

Yeah that's black knights images

[harsh dove]

and they're charging way more for them

[prime orbit]

Lol gotta be careful on AE

[harsh dove]

Same thing happened with Black Jades

[prime orbit]

I’m just gonna ask yall before I buy anything

[harsh dove]

Could get em for $58 from BackSpace and then they were almost $90 on AE

[fluid ravine]

Honestly I prefer nylon or POM (although for thr HE market im not sure what thats like)

I don't mind going with PC at all, if you're more of a clack person I'd say, PC great, but I still think they need to fix smth with the tolerance shi between the stem and top housing cus i still hear slight chatter even in the jade line

[harsh dove]

That

[fluid ravine]

If they do have a final solution to the chatter then I'd be happy
but for now since most are PC i want smth diff

[fluid ravine]

Ink

[rich cape]

Hmm

[fluid ravine]

I mean aren't Gateron's line of switches made of PC top and Nylon bottom?

Common Gateron housing materials no?

[harsh dove]

Yeah

[thorn zealot]

if someone makes a custom hmx he switch here

im willing to pay 100

idc

[jade storm]

PLS PLS PLS

YOU'RE FUCKING AWESOME

I WON'T BUILD A WOOTING TILL AN ALL BLACK HE SWITCH SHOWS UP

[calm pulsar]

ah gotcha

[calm pulsar]

yeah full black switch would be hard af

[prime orbit]

I think we all waiting for that lol

[median spade]

👁️👄👁️

Uhhh he usually has a banner on website but my orders were 2-5 days usually

My last one was like next day really surprised me

[brazen sparrow]

Has anyone tested these yet?

https://geon.works/products/geon-raw-he-switch

Can’t find the pic of it with the semi closed bottom

[prime orbit]

It’s pre order

How would anyone test it

lol

[brazen sparrow]

I-

Omg you’re right

I’m actually a silly billy

It says buy it now on the site. I need to read titles…… 😭

[prime orbit]

😭😭

[tawdry tree]

@wary pollen has, not sure if VOD is up yet though.

[hard moon]

WANT!

[harsh dove]

50% off rn lol

[polar girder]

Yo don’t one of you guys have an aluminum frog mini plate?

[harsh dove]

Yes

[polar girder]

Is it raw alu?

[harsh dove]

Yes

[polar girder]

Nice

Yeah doesn’t look like he’s doing that rn. Lucky

[hard moon]

is it more caps lock size or shift key?

or enter?!?

[harsh dove]

Enter

[hard moon]

perfect!

[harsh dove]

lol yeah

There’s also esc keys but I didn’t really care for em

Some metal pyramids

So you can stab yourself

[hard moon]

i wanna be able to hit esc with confidence and not with the fear of losing blood by hitting it

sometimes these fancy artisan keycaps just go too far

[hard moon]

i wonder if anyone really uses that thing...

[polar girder]

Link?

In black might look cool

[brazen sparrow]

“I just want to feel something…” while continuing to press down pointy keycap

[harsh dove]

dbrand

[wary pollen]

https://www.twitch.tv/videos/2185178613

[tawdry tree]

@brazen sparrow @prime orbit there you go. 😉

[untold wigeon]

any good sites to get keycaps from?

[tiny summit]

Does anyone know if a all metal wooting keyboard with the zinc alloy + awekeys metal keycaps would sound extra deep/thocky? 🤔

[prime orbit]

I bought the black knights today so I don’t need this anymore (don’t change my mind)

[tawdry tree]

All good, but there’s the sound test if you wish to check them out as well. 😉

[prime orbit]

Tyty

[brazen sparrow]

Oh sweet he tests it with a wooting board right?

[thorn zealot]

since when did dbrand start making keycaps

thought they were case only

[harsh dove]

They released these awhile back kinda and they sold out and now they releasing them again

But this time they’re 50% off

[old swallow]

oh, imma grab some of those haha

[cedar gate]

Watching the SEN v. KRÜ match rn

Incredible ace by tenz

[hard moon]

#🎮│game

[cedar gate]

Mb

[untold wigeon]

It would make more sense as delete

[hard moon]

it makes sense as an enter key, if you have to send a customer support reply to a Karen ticket

[regal swift]

Have any of you guys swapped out the case for the Wooting 2 HE?

[wary pollen]

yup, only way I can test HE switches currently lol

[polar girder]

With what

[fluid ravine]

Unfortunately there aren't any 3rd party 2HE cases

You would have to make a custom one which would be pretty expensive

[paper bloom]

Unless u got ur own 3d printer

[polar girder]

Yo

3d printed keyboard cases

https://tenor.com/view/mind-blown-mind-explosion-explode-gif-4740219

[fluid ravine]

Hipyo Tech 3d Keyboard Flashback

[loud zephyr]

this dude was working on a 2HE case, not sure where it's at though: #🔧│keyboard_modding message

[polar girder]

My table really sucks. So that low resonating sound you sound between strokes is the table lol

mic is mounted to the table too

x.x

[sleek hinge]

what switches and caps are these please

[polar girder]

Stem swapped raptors and some double shot side legend PBT

L45 spring

Pc plate and module stabs. Hand lubed.

But about to swap bunch of stuff around

Oh and stock 60HE plastic case

A module in a stock plastic case

Love to see it

[fluid ravine]

FROG BUILD WHEN

[polar girder]

Need plate

Then I switch to tx ap plate mount stabs

I’m excited for that

[uneven cradle]

Soon

[polar girder]

I’m also waiting on PP plate

[fluid ravine]

Waiting on 2 future frog builders

am excited

[calm pulsar]

fellow viper v2 pro user

[polar girder]

lol it’s my backup but it’s sturdy

Trusty companion

[loud zephyr]

one of them said you could have their Frog build once it's complete

[polar girder]

Fresh skates were a nice upgrade for it

[fluid ravine]

attempting to crank flashbacks

[loud zephyr]

[polar girder]

oh and I have that weird nuphy spacebar thing lol

[fluid ravine]

unsuccessful

[polar girder]

Ghost Bar i think they call it

lolz

bro i just got my frog mini

[loud zephyr]

[polar girder]

you already trying to take it from me?

[fluid ravine]

LMAO

[polar girder]

yo it came with a case actually

i'm pretty hype on that

and the 80a tadpoles

[fluid ravine]

you know what to do, pass it over ;D

[polar girder]

I don't think I have the right screwdriver to open the frog mini

[fluid ravine]

I need it to work out yknow

[polar girder]

guess i have to give it away

[fluid ravine]

[loud zephyr]

screenshot that

[fluid ravine]

shot in 1080p

[loud zephyr]

Early christmas present coming your way

[fluid ravine]

Bday*

[loud zephyr]

[fluid ravine]

Bday gifts being my early christmas presents LMAO

[loud zephyr]

I just want an old school wagon for christmas... but

https://tenor.com/view/dh9511dh-empty-wallet-hurt-look-away-gif-13355852

[calm pulsar]

yall really making me cop the silver frog😤

[uneven cradle]

fomo hitting hard had to cop

[calm pulsar]

yhh geon said no more will me made

[harsh dove]

You don’t have any Hex Bits?

[thorn zealot]

Are there any other cases that allow gasket mount or whatever for wooting

[harsh dove]

Rose60

Poron gaskets

[thorn zealot]

Let me guess

Crazy expensive

[calm pulsar]

there's also this
https://kprepublic.com/en-gb/products/poseidon-psd60-gasket-case-anodized-aluminium-case-for-mechanical-keyboard-black-silver-grey-white-for-xd60-xd64-gh60-60-bm60

[harsh dove]

Nah

Kinda hard to find tho

[harsh dove]

Need special plate for that

[calm pulsar]

it's also kinda ugly imo

[harsh dove]

Yeah I don’t care for it

[thorn zealot]

Been looking through many alexotos vids

I wish one of those cases work with wooting

[calm pulsar]

he did a holy60 build recently, but I wish he used jades

[thorn zealot]

Fuck that case

[calm pulsar]

yeah xd

[thorn zealot]

Hopefully ppl start making some nice cases

And actual new switches

[harsh dove]

Yeah I'm pretty much chillin for now in terms of 60HE cases and Switches until something interesting comes out

Waiting on the 461E

and Optimum Case

[calm pulsar]

maybe once 80he is out ppl will be inspired to make gasket mounted cases fo 60HE too

[harsh dove]

It's just kinda hard because more often than not you need a special plate made for Gasket

for it to work with 60HE

[calm pulsar]

I think kbdfans can afford to make a frog mini kind of case and produce plates themselves, but not sure there's a lot of demand for it since every other 60he build is already using their tofu redux

[thorn zealot]

I saw that the 461e is both tray and some sort of gasket?

[harsh dove]

Yeah

The gasket is also two piece silicone pad

so you can remove the center for the alphas

and have nothing or replace with poron

[calm pulsar]

would it work with HE switches? I thought they are not really fixed without a plate

[harsh dove]

You still have a plate

That's the silicone pad

[calm pulsar]

ohh

gotcha

[thorn zealot]

Wonder how this compares to frog

Not like I can nor will get the frog anyway

[harsh dove]

Yeah I'm not sure, I'm hoping it sounds nice. I have a feeling it will

[paper bloom]

It shld with the way its been built

[harsh dove]

I've finally managed to get my Frog sounding nice imo

[paper bloom]

But there isnt any brass weight

[harsh dove]

Yes there is

there's 3

[paper bloom]

O there is ? Nice

[paper bloom]

Mb mistaken it for the redux PSD60

[harsh dove]

Ah yeah

[paper bloom]

Ik the 461E has it

[calm pulsar]

you mean recently? or are there any newer sound tests uploaded

[harsh dove]

Like today recently lol and Nah I haven't made a sound test with it yet

#🔧│keyboard_modding message

My most recent one

[calm pulsar]

yeah I remember this one
always looking forward to new tests

[thorn zealot]

Unless somethin else comes out I might get this case

Just wish there were diff colors

I mean a color to match my keycaps

[harsh dove]

Yeah only thing I've done since that sound test is add Polyfill and swapped to PBT caps

[paper bloom]

@harsh dove u know any good 5 degree cases besides the alumaze and the 461E ?

[calm pulsar]

kbdfans usually have a good selection, are the ones for 461e not fitting?

[thorn zealot]

I wish there was a mocha one like the redux

[paper bloom]

Im rn using the default case from the stock

From the tofu redux to the stock prebuild LOL

[daring helm]

why

[harsh dove]

https://www.prokeys.store/products/5-degree-case

[calm pulsar]

yeah Ig pbt caps can reduce some of high end noises
where is that alu plate from?

[sharp vigil]

wow

5 degree case

Typing angle: 5 degrees
checks out ✅

[harsh dove]

[calm pulsar]

freebird60 is 5 degree too btw

[harsh dove]

Yeah

Similar to Tofu

but better imo

only slightly

[harsh dove]

Plate is from HypeKeyboards

Based in Canada

aka Tom

I've also gotten plates from SMKeyboards

[calm pulsar]

hmm I wasnt able to find aluminum there

[jade storm]

Klippe T, Freebird60, or Tofu V1/Redux? No budget.

[harsh dove]

Don't think he has any rn

Will probs get a shipment soon

if its not already on the way

[calm pulsar]

sadge (not that I have a frog mini currently lol)

[harsh dove]

Lol

[calm pulsar]

do you remember if he had diff color options for alu?

[harsh dove]

Not that I recall, I got this plate from Tenturo but he got it from Tom (HypeKeyboards)

[uneven cradle]

have you tried the PP plate with the frog mini?

I'll have to do a sound test once I get mine built

[harsh dove]

Nah I just have POM plate and Alu

[knotty iron]

Never ordering from KPrepublic again

How do you contact these delivery guys and get your package after delivery was attempted

[prime orbit]

What happened?

[knotty iron]

They attempted to deliver my package, no one was home

[prime orbit]

That’s not KP fault lol

[knotty iron]

how do I contact them

[prime orbit]

Uh contact the delivery people

[uneven cradle]

Should probably contact the courier not kprepublic

[prime orbit]

Yeah

[knotty iron]

is it through text or what how do I do that

[uneven cradle]

Probably through a website or phone number

[prime orbit]

Usually a contact number in an email

Tracking number

[knotty iron]

there was a number that texted me about my shipment

[prime orbit]

Something

[knotty iron]

nothing in email

[uneven cradle]

Go on website of courier put in tracking number usually there's some kind of support option

Can either try for redelivery or pick it up from w/e depot they have

[knotty iron]

This one is 4PX

i tried emailing the track 4PX email but it didnt recognize the email

[cold bloom]

What's the mounting style on the 461e? @harsh dove

it's hard to tell from the kbdfans site

[knotty iron]

sorry for troubling you guys

[harsh dove]

Gives the option to either do tray mount or gasket mount

[cold bloom]

damn I might need to snag one then

[polar girder]

“Gasket”

[cold bloom]

I'll wait and see how you like it

Did you add poly fil to the salvation or something else btw?

I decided to try a sort of burger mount on my 2 screws, put orings under the pcb and screwed until I just barely felt resistance and I think it sounds great now

[paper bloom]

Ty

[harsh dove]

Nah I just have silicone pad and burger mount for my salvation

no tape mod or case dampening

[cold bloom]

yeah that's what I have rn

I really like it

[harsh dove]

Very nice, what switches?

[cold bloom]

I'll probably try the poly fil when I have time to go to Micheal's lots of golf this weekend

jades rn

with l60 springs

[harsh dove]

Ah okay nice

Keycaps?

ABS or PBT

[cold bloom]

been switching a lot but either pbt fans vior or deep sea predator

the mods for both of those are pbt

but the alphas im using rn are abs

[harsh dove]

I wish I grabbed that Vior set

Ah okay nice

Yeah I use ABS on mine too

[cold bloom]

or wait vior might be abs for mods too

[harsh dove]

I think it is

[cold bloom]

yeah it is

I have the deep sea predator mods rn they're pbt

[harsh dove]

Ah okay

[cold bloom]

then blue hangul I think for alphas

[harsh dove]

Yeah I haven't tried Polyfil in the Salvation, you'll have to share your results

[cold bloom]

Will do

Hopefully will grab some tomorrow evening

you have the symbiote set btw right?

I wanna grab it off a site in canada before it's gone lol

[median spade]

no do not buy this lol

worst case to ever exist or one of them not even kidding

ping master 5000 even with foam and such

[harsh dove]

Lmao I'm not , he just asked for 5 degree

didn't ask about quality lol

[median spade]

such an awful case

I have one rotting in my closet so can confirm

[harsh dove]

Haha fair enough, I believe it just based on looks

[sleek hinge]

Hi everyone, im looking at buying keycaps for my wooting 80HE i would love some recommendations for brands please. this one linked is something i am thinking i would like, definitely PBT https://www.amazon.com.au/Drop-Skylight-Keycap-Set-Shine-Through/dp/B08FM9KRSZ/ref=sr_1_54?dib=eyJ2IjoiMSJ9.AeZbsxcujJV4-usNg93pCqHKSXWk6eWOV-Cgxlbf9q07OSRhg8HLiGbQzxZXnOQodBz3s9j2BoWo76HLgsV-qgBhdpd9DJ7TI8aLKcZPmof94yZLJ40PYzQahJPgvZg63-LhEO62ikac9N_46TrR6M7PrrK9UUWvK7OseB1KVKSFQdQeGoD88pNQHDb6ygoswTJK7YYV-QFWY311N3z_HYKIZ27lbcu-_7uZLDPLAqB9Fb1-qpQe3YXdkk8kDFfhaxp3PZN9U07-IxC8GStIOTtg2hym0y2W0UOVt_bnGZk.KaggJLBrO7LCkZJvYtr4tGdQnIB11FHsweaJp_aHI7c&dib_tag=se&keywords=pbt%2Bkeycaps&qid=1719725789&sr=8-54&th=1

[cold bloom]

where did you find it in stock btw?

[polar girder]

I didn't

bought used

[cold bloom]

ah fair

I might do that on reddit when i get paid if the one Im looking at is still there

[uneven cradle]

Cafege has in stock shipping might be rough though depending on where you live

[cyan zodiac]

🫡

[untold wigeon]

i was just about to buy one off mechmarket what 😭😭😭

am i really just better off getting a freebird60?

[cyan zodiac]

trade it for a korn

[untold wigeon]

id be willing to buy it off him to try 🫣

[narrow aurora]

Anyone know of some good starwars caps that arent $250

[loud zephyr]

try Novelkeys

[narrow aurora]

Theyre the ones that are $250 mate

[loud zephyr]

what's wrong with the cheaper R2-D2?

[torn summit]

Yo anyone got some nice light purple keycaps that ships to france, rn im interested in cherry taro since it'll fit my tofu60 redux case but imma still look around to see if i can find something i prefer

[velvet egret]

Ayooo what's good everyone!!! Anything new in the past 6 weeks?

[sturdy pumice]

Hello there, got myself an awesome Two HE, any advice how to mod it? I do want to make it more quiet, less rattly (space bar feels wobbly). Tried to find something on YouTube, but alas, 99% videos are for another versions of keyboards

[austere creek]

the same works for the 2he just need to also apply it to the rest of the PCB

[main panther]

Is it possible to mod the wooting 60he so it sound clicky

[austere creek]

you can get the click leaf from some other gateron switch and put it into lekker switches. then they click. idk which specific gateron switch has compatible click leafes

here. the leaf spring is magnetic so a bit of a pain to assemble the switch

[coarse rivet]

How i can reduce the typing sound?

can i add foam to reduce it?

thanks !!!!

[calm pulsar]

https://tenor.com/view/evil-laugh-gif-22378372

[median spade]

Imagine

[velvet egret]

Any new switches that got released in the last 6 weeks? any worth upgrading from jades? @harsh dove

[median spade]

Neo lavenders but they’re more of a side grade so not really

[velvet egret]

These? https://swagkeys.com/products/neo-lavender-he

[harsh dove]

Just Neo Lavenders and Black Jades, nothing super interesting , Lavenders have a nylon top housing instead of PC, so they have a slightly different sound. Black Jades sound pretty much identical to regular Jades but the Black Jades have a dual stage spring, which helps with multiple things really but mainly they have a faster return after release.

Theres also Geon Raw HE

[velvet egret]

What kind of sound do they make/sound test (Lavenders).

[harsh dove]

Just slightly poppier than jades

[rich cape]

There's a video of the sound in the description

[calm pulsar]

upper housings look very tight on these

[harsh dove]

Yeah, Nix said they felt like they had better tolerances, I'll end up getting them, just don't feel like paying $58 in shipping rn

[polar girder]

Nice

[prime orbit]

And black knights are new

Honestly the best switch

im not biased

[calm pulsar]

nice, its noticeably deeper with pbts

[harsh dove]

Yeah I thought so too

[lilac island]

how do you guys set up counter strafing for cs2 with dks what actualtion do you set on the release

[polar girder]

I couldn’t get it to work

I played around with it for a bit but went back to stock reg counterstrafing

[lilac island]

Yeah I've set it to release 0.7mm i.e press A release and press D at 0.7mm but it doesn't seem to be doing anything at least it doesn't feel like it is

[calm pulsar]

got a cable from kbdfans, it's packaged better than some keyboards lol

[untold wigeon]

For me in Pennsylvania the Raw switches are less expensive than shipping. lol

[shut plume]

anyone tried the full size keyboard modding?

[untold wigeon]

I haven’t seen this here. But watch @2:00 they seem to wobble just as much as the WS Dash. And they seem loud to me. Plus I don’t know what the guy was thinking testing it in a Holy60 case lol.

https://youtu.be/79RcRFiSKm0?si=8mdQ-mx70ramc0zC

[floral jacinth]

Where can I find mods made by other people? I especially want to see key sound mods. Maybe I can find one that suits me

[harsh dove]

#🪛│modding_faq

[calm pulsar]

standard jade on the left
jade bottom w/ gugu top and stem

[thorn zealot]

Idk I like the one on the right more

[calm pulsar]

ig switch tester is too tight or this frankenstein switch wouldnt work when installed

[untold wigeon]

Time to get the file out.

https://tenor.com/view/cat-nail-file-filing-nails-idc-salem-gif-15655154

[calm pulsar]

with gugus top and stem it sounds lower pitched and I think less rattle on rebound

[polar girder]

Cool testing

I still want black nylon top

[untold wigeon]

This is why you need those 100g springs

[uneven cradle]

Not sure how accurate those early tests are to what the final product will actually be

[untold wigeon]

Nice

[calm pulsar]

"jade knights" can be installed into the kbdfans cf plate, so I think it works

now I need those black bottom housings from black jades and heavier springs

[polar girder]

I have raptor black bottom

[untold wigeon]

They looked like they were hanging up. Can you clearance them at all?

[polar girder]

Need l35 springs here

[calm pulsar]

you mean when they were in the switch tester?

[untold wigeon]

No when you had them in your fingers. When you released them they looked like they were hanging up/ sticking

[calm pulsar]

sorry not entirely sure what you mean here, maybe my english skills are failing me here, since its not my native 😄

well they both had a gmk keycap fully installed and the travel was complete and uninterrupted in both cases. for each switch I also did a slow press/fast release kind of test on both of them in order to listen to rebound sound specifically

[untold wigeon]

No I’m sure it’s fine. Probably just the way it looks on video

[fluid ravine]

SILENT HE?

DOPEEE

[calm pulsar]

yeah mechanically its all good, and almost sounds better, but I will test it in a full build later

also I noticed that boxed stem has more wobble, but that could be due to higher angle at which you are able to move the keycap around

[calm pulsar]

lol, one of a kind, one-time press switch
press it once and never have to hear it again

[fluid ravine]

yurrrrrr 🔥

[polar girder]

WHAT

[fluid ravine]

TAKE NOTES PEEPS

[calm pulsar]

you vs the guy she told you not to worry about

[fluid ravine]

LOL

[fluid ravine]

that kinda looks nice ngl

[untold wigeon]

What plate is that @calm pulsar

[calm pulsar]

kbdfans carbon fiber plate

[untold wigeon]

Ty

[calm pulsar]

if you get it, make sure to get a countersink screw kit from them also, it is required in order to attach the plate to pcb

[untold wigeon]

Gotcha. I don’t know what layout I need though

[calm pulsar]

kbdfans have plates specifically for wooting 60he

[calm pulsar]

https://kbdfans.com/collections/plate/products/compatible-accessories-for-wooting-60he

here, or look fopr official kbsfans store on aliexpress, the shipping will probably be cheaper

[untold wigeon]

I saw but there were 2 layouts

[calm pulsar]

if you're talking about these 2, these are two different materials

[untold wigeon]

Where is says accessories

Oh ok.

[calm pulsar]

and this is the standoff kit
https://kbdfans.com/products/kbdfans-m2-3-countersunk-flat-head-screw-kit

it basically replaces the standoffs that are attached to original wooting plates

[untold wigeon]

Ok I think I understand.

[final widget]

i have questions about the 60he & 80he- never owned it, but is there going to be a substantial difference between them in terms of performance? and if i purchase the Module version will I be gettting everything needed to build it or do i need to purchase anything else on the side? OR can i upgrade something else instead to make it better? somehow can there be a way to get the module but they build it for me as im looking to get the jades etc, never built one on my own

[polar girder]

80HE get 8k polling. 60HE gets 1k. But the real world difference is TBD.

Module purchase would also need a case, switches, keycaps to finish build.

Which could be purchased on website. But not pre assembled

Could buy a 60HE then jades and swap yourself

Prob closest

[remote cairn]

You cannot order a keyboard without a case (on the wooting website, even the module)

(Just adding some precisions)

[final widget]

anything can be added like maybe a better pcb or something to make it better?

[polar girder]

That’s not accurate. I’ve done it.

[polar girder]

Wooting 60HE PCB is the best. What you mean?

[remote cairn]

Did you ask them to remove it?

[polar girder]

No

[uneven cradle]

You can order a 60he with no case but not a 80he

[polar girder]

I just bought it regular on website

Yeah there is no 80HE module tho

[polar girder]

Just click No Case

[remote cairn]

I meant for the 80HE

[uneven cradle]

[polar girder]

There is no 80HE module

[hard moon]

there is

[uneven cradle]

If there isn't what did I buy 👀

[sweet oak]

A duck

[polar girder]

lol why would it let you buy module if there’s no third party cases tho

Yeah whatever mb. I don’t pay good attention to 80HE. MB

[hard moon]

a lie you told yourself, a lie with false hopes and prays

[final widget]

would it even be possible to get another case for 80he since of its custom led and all or may come in the future

[remote cairn]

There is no custom case aside from the wooting ones, custom case will surely come later

[daring helm]

3d print your own case

[polar girder]

lol yeah that’s why I don’t get module. Unless you just wanted to buy the Wooting case later or something idk

[final widget]

are zinc alloy cases far better than the plastic ones ?

[hard moon]

that's... that's rather wrong. Depending on the way the 80HE PCB is built there can be either a ton of custom cases or nearly none

[hard moon]

the reason why the module can be purchased seperately is more to encourage the community to come up with custom cases themself

[final widget]

also could someone tell me what the jade switches would sound like in terms of mx ? and im right to assume they dont have any tactile bump like browns right?

[prime orbit]

@harsh dove have a vid on how to build the custom wooting with a module? I don’t want to ruin anything

[remote cairn]

What I mean is that rn there is no custom cases aside from the wootings, but for example Tofu will surely make custom cases for the 80HE, they just don't exist yet

[hard moon]

And this is...?

As said, depending on the way the 80HE PCB is built we may have millions of mods and cases or only a handful

[remote cairn]

It's not for the 80HE

[hard moon]

it can be compatible if the F row is a daughter board of itself.

[remote cairn]

You would need to cut the PCB for it to fit

[fluid ravine]

me preparing myself to embrace the GMK shine

[weary tree]

i tought the daughter board came with the case?

[jade storm]

Good news brother, got the account back

[final widget]

are zinc alloy cases far better than the plastic ones ?

[uneven cradle]

https://tenor.com/view/mando-way-mandalorian-star-wars-this-is-the-way-gif-18467372

[cedar gate]

Do you guys love or hate katakana

Everyone I know either loves it or hates it

I think it's awesome

[uneven cradle]

Not a fan myself, I just associate with being a weeb

[torn summit]

Hey imma ask this question does anyone know a keycap site that ships to france ? Im trying to find a good light purple keycap set, rn im decided on pbt cherry taro but im still gonna look around until i buy it

[hard moon]

idc tbh, i think it's fine for me, but i'm a rare case with a part of my family being japanese

[hard moon]

https://www.alexotos.com/keyboard-vendor-list/

[final widget]

would it be possible to somehow customise the case coming with HE to add my name or something to it? if so, please share further details so i can look into it

[hard moon]

it's not possible, because Wooting doesn't offer that kind of service

however, usually any decent metal work shop should be able to do so

[untold wigeon]

I went to a local laser engraving shop.

[polar girder]

Yay my black pp frog mini 60HE plate shipped

Joy

[jade storm]

guy loves his beans lol

[fluid ravine]

[polar girder]

Pumped

[fluid ravine]

oh shi i should lowkey ask my dad to have mine graved as well

[polar girder]

Throw in the tx ap all black plate mount stabs

Then get some new keycaps

[fluid ravine]

ima lowkey need that black plate

[fluid ravine]

whatchu got

[polar girder]

And wait for endgame HE all black switches

Yo fax

I can send you

Nothing yet

[fluid ravine]

blanks?

[polar girder]

Eyeing up these GMK cosmos or the new Black on Black PBS

no prob not

[fluid ravine]

o

this?

I see where you're going with this heh

[polar girder]

Yeah

lol

Or this

ABS not that appealing tho NGL

[polar girder]

This goes hard AF tho

[fluid ravine]

Wait what sound acoustic you going for tho

[polar girder]

I know

[fluid ravine]

Frrr

[polar girder]

Shallow keycaps = not it for me

I like the uniform profile tho

But yeah

XDA would be better

[fluid ravine]

(▀̿Ĺ̯▀̿ ̿)ᴵ ˢᵉᵉ

[polar girder]

Need that deep quiet

Oh that KAM hella deep

[prime orbit]

Deeper is better?

[untold wigeon]

I have a set of xda I really like them

[polar girder]

Better is subjective lol

But different material and shape changes the way it sounds and feels

[prime orbit]

Ah gotcha

[harsh dove]

you broke it

[harsh dove]

I do not but what do you need help with?

[harsh dove]

Make keyboard look too busy sometimes with sublegends, if it's only Katakana then that's fine

[prime orbit]

Just wondering if there was a vid or sum so I don’t ruin it. But I guess I can just ask when I get everything

[weary tree]

https://youtu.be/-0i0XVWM0ig?si=6Dr7_iSFYvLYyyg3

[harsh dove]

Yeah was gonna send that

[weary tree]

like this?

[prime orbit]

Ah ok ty

I just don’t want to ruin my parts by not knowing what I’m doing 😭

[marsh saffron]

It's really easy

I went in blind without watching anything and figured it out in as much time as it took to unscrew the thing

Wooting did a good job making it simple asf

[split fractal]

Anyone know some good places in the UK to buy keycaps from?

[prime orbit]

Makes me feel better

[marsh saffron]

If you are any bit handy the 60he will feel like child's play to put together/take apart

I've had Lego sets that are 50x harder to build

[prime orbit]

OK I’ll be good then

[torpid crow]

what's everyone's fav lube for magnetic jades

im using mine stock rn but was thinking about lubing them, i just used 205g0 for the lekkers

[tawdry tree]

I’d def use them with the Jade’s stem as that’ll be just like stem swapped raptors. Black Knight’s stem in Jades’ bottom results in more wobble than you’d have in stock Black Knights 😉 Now I think about it, the Black Jade bottom + Pink or WS Dash stem would be a sick colorway 😂😂

[tawdry tree]

205g0 yes, they come prelubed with that so no need to clean them (which you’d have to do with most other lubes).

[prime orbit]

You can mix switches together?

[tawdry tree]

Woot’s YT has everything you’d need really.

[tawdry tree]

Some

[prime orbit]

Ye they showed me 👌👌

[prime orbit]

Would it be worth it to do with the black knights

Or just keep em stock for now

[tawdry tree]

Depends, it’s not really worth.

[harsh dove]

I'll make the ultimate Jades when my GUGU come in on Monday

[prime orbit]

Since I don’t know what I’m talking about 💀😭

[prime orbit]

What you gonna do

[tawdry tree]

It’s just the same as a stem swapped Raptor but with a Gateron bottom.

[harsh dove]

Idk yet I have a lot of switches to possibly franken swap them with

[prime orbit]

OK but this is project ultimate black switch

[harsh dove]

I can make all black dual stage spring box stem Jade

[tawdry tree]

Gateron has no BLACK* stem sadly.

[prime orbit]

This doesn’t even look like English to me lolol

[prime orbit]

Rippp

Waiting for the ultimate black he switch

It’ll be made eventually

What would be the ultimate black switch?

[tawdry tree]

They do have White, orange, pink, purple and dark green

[harsh dove]

Black Jade Bottom, Dual Stage Spring, Black Knight Top and Stem

[prime orbit]

You could technically make that rn no?

[harsh dove]

Yes

[tawdry tree]

This is only good visually

[harsh dove]

when they come in on monday

[prime orbit]

Sheeshhh

If it works out lemme know

Maybe I’ll do it too

If it’s worth it

[harsh dove]

Yeah you guys have been saying the box stem isn't that nice?

[tawdry tree]

If you care that much about aesthetics, yes. Haha

[prime orbit]

I mean

[harsh dove]

or the stem wobble isn't good

[prime orbit]

I’m just trying to make the ultimate black keyboard 😭

[tawdry tree]

It’s not that but that combination doesn’t really do much and is just for the black color

[harsh dove]

Ah okay

[tawdry tree]

If it’s the black top housing with a gateron stem you at least achieve a stem swapped raptor feel

[harsh dove]

I never liked those to begin with

Was always too tight

[tawdry tree]

with gateron bottom, black king top and stem it’s worse wobble than with just the black knights alone (which also have a black bottom).

[tawdry tree]

Give it time 😉

[harsh dove]

I still don't like them cause they're open bottom lol

[tawdry tree]

Mine are still tight but not as much as when I first used them

[harsh dove]

I wonder if any frankenswaps can be done with the Raw HE

All black with milky top maybe

like a nixie almost

[tawdry tree]

Gateron’s stem doesn’t fit through Raw HE’s top

[harsh dove]

Didn't think so

[tawdry tree]

Could still be interesting to try with a Raptor stem

[harsh dove]

yeah

[tawdry tree]

like Black Knights or something

[harsh dove]

Stem wobble might be bad tho

[tawdry tree]

Raw HE’s top is tighter than all Raptors variants

[harsh dove]

Yeah

[tawdry tree]

Could be the perfect switch

perfect fit*

[harsh dove]

but if using a diff stem then it won't be as good likely

So maybe black jade bottom with raw he top

[tawdry tree]

We shall see soonTM

[harsh dove]

Yeah lol

[polar girder]

But Raw is PC top

Meh

[harsh dove]

Milky Top tho

[untold wigeon]

What country are you in?

[tawdry tree]

Wooting country 😂🇳🇱

[untold wigeon]

lol. Too bad, if you were closer I’d mail you a dash switch. I’d like to see that combo

“Now I think about it, the Black Jade bottom + Pink or WS Dash stem would be a sick colorway”😂😂

[harsh dove]

Yeah that's the only Jade variant I don't own

Mainly cause there's nothing different about it besides color so I never bought it

[old swallow]

wootland 🇳🇱

[tawdry tree]

Haha, all good. I’ll get them eventually 👍

[untold wigeon]

are there any updated lists of cases for the 60, or is the list the only ones?

cant find any low profile cases 😦