#🌟│wooting80he
1 messages · Page 356 of 1
Just gotta wait for now.
How to get white ten keyless wrist rest?
keyless wrist rest??
https://wooting.io/product/wooting-wrist-rest-80he?Color=White
You add it to your cart. 🙂
What regions is it available? Im in wisconsin and it says it's not available.
Works fine here.

You're asking that in an 80HE channel?😂
Excuse me bro
I'm not familiar with 60HE keyboards. But they wouldn't be suitable for me anyway, as I frequently need the function keys and arrow keys.
Wooting 80he more like wooting awesome he
Was there a bug in the previous h80 beta where keys wouldnt work in tachyon? (new version seems to work, just updated, problem was in old version)
I believe so, yes. There was some reports of the W key in particular getting stuck I think?
can anyone help me with my keyboard
sorry but its taking way too long to get replied to
its just tweaking on its own
and i cant even save a profile#
unplug + replug and try again
done that a million times
i boot up pc and its in bios somehow cos inputs are being inputs
You already have a community support thread, please use that or wait for Wooting to get back to you 🙂
they adviced me to do some things, didnt work and its been over 24hrs since their last reply :(
They have a lot of tickets right now, please have some patience and wait for their reply.
on the way letssssssss gooooooo gwluuugwluuuu
I know where you live😈
OoOoOOh I am ze spirit of gambling . I exists within everyone gwluuugwluuuu
mine just touched down too 🙂
which keys are these, i have the same keycap set so i can be extra carefull with those keys
Gmk brg r2s, they were on lekker l45s but are now on tikkens
One stem snapped completely in half then snapped into a second fragment, managed to superglue it all be it now looks awful
i mean which specific keys
Arrow keys
At least you'll never see that side while it's in use
how long does it taken from order to ship out? Mine is still Ready to pack
That depends on where you live.
I live in Germany. It took 6 days from ordering to delivery. However, that was in October. It may take longer now during the Christmas season.
that vent thingy, did you do that yourself?
No it's an option on the GT80 case.
looks awesome
Hi everyone, so I ripped off the sticker backside with the instructions from the back of the pcb of the 80he, not knowing that it was to dampen the click sound. Is there any way to get a replacement sticker backside or is there a mod that is similar to the sticker backside? Thanks in advance
Tape mod
Thanks, so no way to get a replacement? As I just ordered some new stuff and if one could just throw that sticker backside in there that would be awesome but fine if thats not possible
No. It doesn't exist as a separate item.
Unfortunate
Just get a roll of masking tape. It won't be as pretty as the original one, but just as effective, and costs about $2 and 5m of time.
You never really see it anyway 🙂
Is anyone else having the problem that they can't update their Wooting80HE to the current version 2.12.1 because the browser displays a message saying that no compatible device was found?
Which browser are you using?
I tried with Brave, Chrome and Edge and downloaded the App from wooting.
Gotcha, none of those should be an issue. Not sure man, maybe open a #1019755933959733258 thread
done 🙂
I bought painters tape, is that the same thing?
Yes
That's what Wooting used on the v2
Why are there no sticky pads at the spacebar stabilizers?
They caused issues and didn't provide much benefit
Ok
Wooting support told me to reapply or put lube into the stabilizers to remove the keyboard rattle, but i dont have lube and theres barely any there in the stabilizers. What do i do?
Buy lube?
Ok
mine , it moved from germany today itself its coming fast gwluuuugwluu
about 2-3 days
can i use wootility with brave browser?
Yes and no.
Background service currently broken (fix in progress)
And you need to disable the Privacy shield option for the site.
so should i get another browser fot wootility?
Up to you. Or use the app.
can someone tell me if the GT80 coating is better, equal or worst compared to the zinc alloy case? I want to buy the zinc alloy but im scary of the durability of the zinc alloy even tho there is warranty and stuff. I just want a case that last long no headache
Probably faster to ask how many people have had issues with their GT80 over on the KBD discord.
It was never a widespread or huge issue with the 80HE Zinc cases to begin this - Just blown out of proportion from a single review from someone who doesn't care about the boards 😄
does anyone know why the 60he v2 is faster than the 80he? Chart from techless review
Less keys overall so faster to scan them all
But 0.8ms difference is basically nothing
could you theoretically disable the f keys and other 80% keys on the 80he via wootility and get the same result?
yeah I know its negligible but I'm a sucker for latency
the 80he could be on the older firmware
newest wootility beta + switch selector + same switch could give you the same ish performance.
though 60hev2 performance test across reviewer is kinda partly odd, one of the test shows 60hev2 being slower than 80he lmao.
lmao
60he v2 will be faster due to less keys as others mentioned. It also has a slightly faster mcu, but again, we are waaay beyond the point of latency of that stuff mattering
could you disable the f keys and 80% keys on the 80he via wootility on a tryhard gaming profile to get the same result though?
technically yeah, although the mcu in the 60he v2 will be a tad faster regardless, although both run at 8k
got it ty
although we don't have that option available and likely won't be putting that focus type setting on at any near future
you just disabling on your end isn't the same as the keyboard actually having those keys disabled, so just gaming profile alone wouldn't be it
unlucky, I'd love a setting like that though
honestly focus modes can be bit buggy and usually not worth the drawbacks of the weird bugs and other potential issues for like a 0.3ms increase on a few keys
we do suspect that techless video had something odd with the test too because the 80he shouldn't be that much slower than the 60he v2 in the test, which others pointed out too - there might be some bugs and inaccuracy in how a lot of these tests are being done
I just care about having the best latency, it's more of a obsession rather than utility
not gonna dish out another 230€ to get the v2 for the better mcu though haha
yeah that would be crazy just for an unnoticable mcu spec bump lol
the good news is the accuracy improvements are going out to 80he too with the 0.1 and switch selector things (with more switches coming soon)
so if latency is what you want the best improvement in then the accuracy improvements with a good stable switch will be more noticable
releasing the tikken switches was a better upgrade than any other improvements the v2 could bring vs the 80he imho. I love the tikkens
yep we were definitely due for much better stock switches
good work
there's a lot more things like that in the works too, just takes some time to get them from scratch to into a product since we do a lot of things custom
knob first
honestly v2 is still a tricky sell to average joes. I've had 2-3 friends buy wootings this holiday season and none went 60he v2 because normal gamers always go for f row keys
that's why we need a split 80he v2
one day the gods will bless us
There's many kinds of average
yesh, the average around me wont even consider wooting cause average wage here is $500 iirc
$500 per... year?
My wooting 80He i just got had only the spacebar and indicator bar RGB working what could be wrong?
month
That’s tough
Can you take out a keycap like g
And take a photo of whats under
Like g, or like a G?
Yes
Oh im stupid... I put all the switches upside down hahaha
that's why
Yea what abt enter?
Yes its lighting up 🙂
hey i have problems my wooting stopped get connection before 1 hour i could play now not anymore
whats with the random black keycaps ?
accidentally ordered ANSI keycaps instead of ISO nordic
Just switched from another keyboard until i get the correct ones
they are for the spacebar
it’s recommended to use at least 80g springs for the spacebar
is there an option to edit my review?
what switches are the default for wooting 80he ansi? i updated/installed new wootility app update + it did a firmware update and since then my keyboard doesnt fing work correct whatsoever because ive been using a config import from the site that happened to have been meant for a 60he and idk if it installed the wrong firmware and its all sorts of dogshit now because of that or if its because it has this submenu for "switches" and its set to whatever the 60he uses not the 80he, my buttons very often dont even work and cant tell if its because of this new weird switches functionality, i have been completely griefed and my keyboard is pretty much as good as bricked even though it "works" its completely unplayable trash infinitely worse than random cheap keyboard from like 2002 i cant even strafe anymore it doesnt press sometimes ffs
80HE comes with Lekker60 V2
My keyboard keeps disconnecting when I change actuation
This is the profile I'm setting up:
8b50deb0fcac343e7abae3232a7c5eac9776
Whenever I change a key like number 6 or W and stuff it just disconnects
My previous profile setup stopped working because it disconnects when I switch to it so I made another one and tried to do the same stuff but at some point as you can see in the code I sent it keeps disconnecting when I make changes. How can I fix this?
do you have the background service installed? if yes, try updating it. then, replug your keyboard and see if it lets you set actuation properly again
I have it like this, is this fine?
if you don't have it installed I don't know why you would be getting that issue :/
hi
the split spacebar on the 60hev2 gives you access to F row as easily as a normal keyboard if you use the middle spacebar as Fn1
average gamers still won't really consider it. It's a big jump for them as many haven't even really seen a 60% keyboard before so they just gravitate to 80he as their only option
it's mostly people within the space and some fps gamers that may be more familiar with 60%, but the 'normies' just think of a standard tkl as what they need
60% keyboards are used heavily outside of gaming for anyone that wants to reduce hand/finger travel. Programmers, Developers, Writers, Editors and on. Rapid trigger and low actuation are gaming centric features but 60% size is popular across a wide audience
Oh yeah I know, but it’s still very much specific niche communities who use it
On a whole a lot of just non techie average joes still will not even look towards a 60%
Away from regular Fn Layer use I'm loving the split spacebar on mine for such things as Grenade on G, Smoke on Fn1 (middle bar)+G. Two Functions one key is great with the middle spacebar being so easy to reach
hi guys, i just updated my wooting firmware and now it is not working, but leds working fine, how i can restore old firmware? full restore did not help
if i build the 80he by choosing the module version and going down the list of option (case, switches and keycaps), do i still get like the foam and all the other stuff mentioned on the website with it?
yes
You would have an identical board, just in pieces.
Hey guys, am I right that Tachyon mode is only availiable with 60h+?
Somehow after that message I got that setting in menu lol
Tachyon mode is available on all of our HE boards.
However how much it does depends on the model.
Can you describe it more?
It decreases the scanning latency, by disabling RGB animations (or rather using the bandwidth it would use)
I mean the deffirence between models on tachyon mode
Hello guys
Help me
does anyone know how to fix it
?
I unplug in the middle of an update
It flickers between whatever this is and my normal config anyone know what it is? My pin would be spammed with brackets and - + on startup otherwise past the startup screen after reconnecting the keyboard its fine
Looks like FN-1 layer, that should be fixed by just pressing Fn then
I just hope my keyboard isnt going out :c its never done this till the new update
is there a consideration of a split bar for 80he ? 😛
Hey does anyone know if the toggle key feature will be for the 80HE aswell or just the 60heV2?
The toggle key feature lets you turn any action into a “press once to hold” key. Instead of keeping a key pressed, you press once to activate, and press again to release. This puts less strain and more comfort as you crouch, sprint, aim or auto-walk without having to hold down anything. Racing gamers can use this for a steady throttle or braking, while MMO adventurers can stroll endlessly through their world.
That is a general feature in Wootility, independent of what keyboard afaik
https://forms.gle/MjZDg7y4tCYGExqP9
I voted for it in the form - you can too 
Hey all! On December 30th, we'll have our anual End of the Year livestream! Packed with fun activities and vibes~
Usually, we would have you all participate in a quiz but now it's time to put the Wooting employees to the test! How well do they (think they) know you?
If you could answer these 4 questions for us, that would help out a lot!
Your ...
quick question: i got an 80HE and would like to make left-alt-page-down to play and pause media, instead of using the dedicated fn-function key because I fand it easier when I'm mult-tasking and watching something in the background
Can someone point me to something that would show me how to or explain?
or point me to the channel where I should be asking this
You open Wootility, you go to the remap tab change around your keys to your liking.
Typing in this chat to see if my roles got auto confirmed or whatever. Super excited for my 80he! Been wanting a Wooting forever haha
I hope you have a great experience! I've been using the 60HE for about 2 years now. Decided to get myself the 80HE 2 days ago 🤞
Thankyou 🫶
Woohoo
I have a question, is the zinc alloy case supposed to look like that? On videos i didnt see those patches and im wondering if thats normal or not
Yes. Every case has slightly unique rolling marks from the machinining.
ah okay thank you i was a bit unsure, does the black and white zinc alloy case have the same thing or is it only for the raw cases
Just the raw case.
Yeah I was on the fence about the 80he or the 60heV2 but landed on the 80he due to liking arrow keys/f keys and the switches being specs wise the same besides wobbling I think ever so slightly? (keep in mind I am not an expert so please correct me if I’m wrong haha)
Seems a bit more functional too for outside of gaming. My old 60% keyboard broke but super nice for games but everything else it was a little troubling compared to my apex pro tkl
thanks man i appreciate the help :)
the 80he is just more functional, ive had the 60he for over a year now and its an amazing board but i just need those arrow keys and f keys
80HE is the Best (for me)
its raw
hello guys, i just installed brand new geon raw he switches on my 80he. is it normal that the led is south facing? is it okey if i install them they other way around?
Left is with geon logo correctly facing, right is with north led
why is the logo then upside down? i had previously gaterons, and to correctly install them, you had to properly read the logo if its correct
This is how left switch is installed
Because their switches are made for south.
But you need to use them north here.
I was worried I couldnt face them north
Every keyboard company places their led on their modules differently and like mansen said
Okey, thank you 🥲
usb c to a dongle arent sold seperatly right?
Mine broke idk if replacements get sent
Pick the category and issue you need help with, and we'll guide you through the process.
I'll fill out the form then
hello fellow 80he owners, those who have tried background service--anything I should know before getting it? performance impacts or anything of the sort
It's been very well behaved. Currently consuming 0% CPU and 6.1MB memory.
awesome 👌
if it ever eats up more than that please yell at me :D
just got my 80 he and first game on val went 16-2 on a swift
Better yet, hire me and let write rust for you 🙂
(open offer, but it seems like you've got things pretty well handled 🙂 )
there's an open call on our website :p
does anyone have the discord notifications set up with their light indicator
my mute is appearing but notifications don't seem to be
I had the exact same issue, but seemed to be the only one. Not sure if it's something on our settings side or what.
maybe has to do with some kind of discord privacy settings or something
it's probably working, it;s just that notifications suck
the api discord provides tells us when you get a notification, but not when you have unread things for example
so all you get is a flash on the lightbar. unfortunate :/
Just got my 80he a few days ago, this thing is awesome I love it 
Is there a hand rest that’s compatible with the 80he?
Hey all, I did a dumb and spilt liquid on the keyboard. I completely disconnected it, wiped it down and dried it as best I could while leaving it to rest outside for about a half hour. It came back pretty much perfect but my backspace key does feel a lot stickier and hard to press compared to last time.
Anyone got any ideas? I removed the switch to look it over, and it seems mostly okay.
I see people talking about stabaliser pads potentially becoming sticky. Do I have to go throug hthe full disassembly process due to this?
If you got your 80HE in the first or second batch last year, you'll need to remove the pads under the stabilizers. I'd also recommend relubing the stabilizers, especially since you spilled a drink on it, they're likely dry and without any lube now.
How to remove sticky stabilizer pads
How to properly lube and tune stabilizers
Yeah I got them quiiiiiiite sometime ago. So I'd say probably those batches.
Alright, well that sounds like a perfect project for the christmas break 
the daughterboard is included when buying the module w/ case right?
Daughterboard comes with the case, yes
Hi, most likely a stupid question but does layout matter when buying a new case? I have a ISO board in a ANSI world and want to swap case but paranoid about if its a difference or not x.x Didn't know where else to ask so apologies if its the wrong channel
Generally not unless the case has special plates required
If it’s just a tofu redux or an optimum case for example then it doesn’t matter
On the other hand - OW60 comes with a carbon switch plate, which only works with normal, not split. So in that scenario you'd have to forgo using that plate.
Anybody have geon raw he’s that they don’t use and wanna sell lol
$800 for 60 of them
So just as a few examples that i have been looking at;
KBDfans Holy80, KBDfans GT-80 or GameZone Bone80 would work just fine?
Yeah those just fit 80he like normal
Holy80 though you buy the plate don’t you
Iirc they offer you a plate option when you buy
Yeah
Because they changed the amount you need to make sure you buy plate from them that fits your layout
https://www.maxgaming.se/sv/cases/holy80-case-dark-gray
it says that a bottom plate is included so i assume thats what you are talking about?
"The Holy80 comes with various components, including a JST cable, an aluminum cover and base plate, rubber feet, screwdrivers with T8 and PH0 bits, and silicone dampers. The development of the Holy80 has focused on improving build quality and functionality for durable and efficient use."
It’s probably ansi plate if it’s pre included there but you should email and check
If you want iso it probably means buying from kdbfans directly which would get it by tariffs I assume
Yeah it will probably be ansi, sadly.. Might as well get it from kbdfans tbh
grr!!!! 6.6MB!!!!!
i just bought the wooting 80HE. was it a good timing or a new one is on the works?
generally for big brand new model releases like that there's some sort of lead time from announcement to release
so say we announced v2 80he tomorrow, it wouldn't be available for order+delivery for a bit anyway
even with the short time for 60he v2 order > delivery, the announcement was quite a bit earlier in the year
W
Thanks, just ordered one too and had wondered this exact question.
christmas came early bois
are ceramic keycaps fine for the 80he or are they too heavy?
you would need at least 80gram springs for the spacebar
alright, thank you!
Sup
Epic
Yeah they are. Normally cerakeys add one heavy switch that you can put into spacebar
Is there someone else that have "problems" with RGB? orange is not orange, and one part have different color even tho everything is the same color on Wootility? if you have different keycaps, can this be the reason why?
play a little with light level.
like, make the orange more towards white than pure saturated orange
irl it'll look slightly different
I mean u can clearly tell apart red and orange in my pic lol
@dusky tiger I did try it, it seems like the pile keys are correct and rest is waaay off, i show ya:
but red and blue for example works perfectly. but purple is problem again, pretty strange
I think is about the switches
it looks nice what switches are those?
default

yeah, damn you are right. i tryed to move the 4 default switches, since im 4 switches short for the one i ordered.... so i need to order more switches now. thanks
So, different switches make different colors, iguess it makes sense but spacebar dont have switches on the leds glowingup, so there will always be different from the rest of the keyboard RGB from some colors. Not so very visable, so its ok iguess.
depends on the color of the switch i have a cherry switch and when i want to use full white it shows me pink
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
this is what exactly my 80he doing sorry, this annoy me
my problem is my "w" is auto typing , i switch my switch but this still happen on my 80he ,i try reinstall the software but it didn't work,sometimes i re plug my cable and it fix but sometimes it didn't
wooting please make discord mute compatible with tachyon PLEAAAASEEE (80HE LED bar)
wat
i need help there are some buttons on my wooting 80HE not working
Fun little update, ordering the holy80 + a full set of switches from kbdfans website would be around $100 cheaper than to order from the "local" website so a blessing in disguise that they only had ansi plates 😅
Just be aware of any tariff charges that may not be added yet
No idea if they add it at start or not but it would suck if you get hit by a shafie style $300 bill
It did say something about taxes before i entered my address but doesn't only says the shipping price now, have not ordered it so will double check when i do though. Was just curious to see the price difference lol
does anyone have a keycap guide for the 80HE? including the row numbers
Hey how did you get that RGB effect?
I'd relaly like to know it looks super nice like a cotton candy effect
it was default from some other keyboard that I yoinked keycaps from xD
I just took photo and just.. put it in lol
98a07b645ba128202d06be45ee90f26b0482
No but arent you using the 80 HE PCB controlled through Wootility?
I have some gaming settings in
yes I am
I just eye balled it key by key took like 4 minutes
keycaps being translucent on bottom make the effect even prettier
mhm!
Well if you did that hand by hand then you did an amazing job and that was probably time consuming lol
But it looks very nice
im trying to make a dks on my 80he and after updating to the latest wootility v5.2.2 i cant do it
it just keeps disconnecting my keyboard
Do you use background service?
im not sure what you mean
can you some how send me this? 🙏
98a07b645ba128202d06be45ee90f26b0482
thak youuu
Pick the category and issue you need help with, and we'll guide you through the process.
ok, i thought this was only a problem with the white batch?
This isn't the white paint scraping concern.
This is just the anodization not sticking properly during manufacturing. Something we're also improving on.
ok, i will be waiting for my ticket reply, thanks! hope it will get resolved in a reasonable way!
Wooting support has been excellent in my experience, you're in good hands.
https://youtu.be/1o4Ni4CyW_g?si=GEFKUO9gMewsYoAz
I would not even imagine to do this without the 80HE, amazing product guys.
Why always the last wave...
Porque siempre el último wave...
When are we getting split spacebar for the 80?!
are the stock keycaps shine through?
Hi everyone, I am having trouble choosing a switch, I want something good for osu, something with shorter travel distance than 4mm, not heavy or too light, stable stem (no wobble basically), transparent housing for rgb. Any recs?
If transparency is not the highest priority, Raptor V2s. If it's not arguable, then MMD C1s, however some wobble tradeoff will be there, slightly worse than Raptor V2s.
#🪛│modding_faq message
What about TTC King Magnetic, are they any good?, they also launched a couple of new ones as well but not much info on them yet.
Flip KOMs are good, currently my 2nd pick behind DCF of the switches I've tried
Is this a recent launch switch?
Yes
I will check it out then, i don't know anything about it, definitely not enough to recommend him based on his needs.
What does the flipped magnet do for the switch?
changed designed makes it so the bottom of the stem is plastic instead of the magnet. changing the sound profile to be more thocky/muted than clacky
hows the pricing shadow?
TTC Flip King of Magnetic Switch Technical data: Initial force: 355gf Initial Magnetic Flux: 9010Gs(PCB 1.6mm) Final Magnetic Flux: 48030Gs(PCB 1.6mm) Pre Travel: Customized Total Travel: 3.50.2mm Lifetime: 100million Type: Linear Long Spring: 21mm Soft Elastic Design Dust Proof Stem RGB Effect Pla Ventilation Cooling
on par with DCF just very slightly more wobble
i see
Would you say they are better than the raptors?
havnt tried raptor
based on Sno's testing that couldn't be, since DCF is slightly worse on stability than raptor
These switches look promising, what’s the bottom out force?
good question probably around 45gf
Do you think it’s worth hand lubing them?
yeah, it will benefit from hand lubing. there is some scratchiness and uneven lube
Think I’ll be getting these then, thanks for all the info and replies.
Sick, we need more data anyways, but i don't feel like paying for a set of these, not impressive enough personally.
where do u buy switches?
Hi, I'm getting bored of my stock 80he, and I was wondering if the PBTfans Neon R2 glitter keycaps would go well with the Holy80 case (black) ? To recreated the look of the image (holy 60 + PBTfans Neon R2 glitter)
That is up to you, all personal preference
Hey i was wondering is there any info about like wooing80he v2? Cause i was planning to get 80he and was thinking maybe i should wait for like newer and better version of it, or it's almost the same good as 60he v2?
- No plans announced for an 80HEv2
- The 60HEv2 was made to match 80HE specs
Thanks for an answer 🙏
not sure if this is the best channel to ask but is there a way to customize the key lock function on the 80he? I want to be able to disable alt + f4 functionality in some games, but the default key lock/"gaming mode" only works to disable windows key which I actually want to keep on.
No. You cannot block specific key combinations - That's something the operating system handles.
I decided to just enable snappy tappy on both and gave absolute priority to f4
I use alt for free look on flight games so this works out for me
and just switch to a different profile when not on flight games
I Just got my baby😈🥰
quick question does anyone know how to turn this off
this happens when i press the Caps Lock key
You install whatever software you have that's from your manufacturer.
Laptops commonly have this, as do some motherboards if you install their entire suite.
thje keyboard is insaaaaaaaaaaaaaaaane fenku wooting for building somegfing so fiiirre
as a fellow 80he owner im happy for you but are you ok?
how can i get macros on my wooting 80he
AutoHotKey
what is a pcr???
Plastic.
ok
YESSS gwluuuugwluuuugwluuuuuu fenku
doesnt wooting have there own macro
No we do not provide hardware macros on our boards. We like to keep things fair.
who has a pro esport kb profile from knows players? for fortnite and valo
I bet the players do. Go ask them on stream.
Mansen are you doing alright?
does anyone know a good macro
🙊
happy christmasuu in advance fren
My 80he is on the way! My first keeb, hoping I don’t get overwhelmed by the software
I tried getting the Nuphy Field75 HE first but Amazon twice sent me an open boxed item so I returned both
you won't
you will enjoy it

I am looking to buy a 80he, what switches would be suggested?
Lekker tikkens or owlabs ti
Are the GEON Raw HE recommended?
is there a 60he v2 channel?
ty
Hi everyone, I have a question regarding stabilizers, I bought switches with 3.5mm travel for my 80he, what would be good stabilizers to pair it with, good quality/premium.
Stock
do all keycaps work with wooting 80he?
as long as they have the mx-style stem (+) yes
is there a guide for this keyboard on yt?
scan the qr code and you'll get to the quickstart guide
if you have the module we also have an assembly guide on our youtube yes, but if it's the prebuilt then there's a text quickstart guide
the keyboard is estimated to come this friday so i dont have any qr code yet.
yeah its the prebuilt
oh then the setup is much simpler, but yes we do have quickstart guides for it that run you through initial setup
oooo tyyy
looking through the guide, which one would your rec me using, web browser or download the application?
that's up to you. both work
some people like dedicated downloaded software. Some don't like downloading things
thats interesting because a bunch of other companies work only by having its app while wooting u can customize stuff on the web browser
I think most people might be okay with the app. They just don’t want Razer Synapse or whatever Steelseries or other big brands offer for bloated software
theres no difference though right besides ofc one you have to have space for the download?
Big difference between an app and always running bloated software
well that's not true either, you don't run the software all the time
even if you download it
no difference generally yes, just go with what you prefer using
okiee tyy
I’m sorry I wasn’t referring to Wootings app. I meant Razer or others that are bloated and running always unlike Wootings app
js tweaak ur pc
how are people’s experiences with cleaning this keyboard particularly people with pets and/or lots of hair
In what sense? It's the same approach. You pluck the keycaps, you blow out the gutter and use wet qtips to clean it. Then put them back.
Can somebody help me on this please
For help you don't generally ask in the channels, cause it'll get lost in the flow. Make a proper thread.
I have beta opt-in enabled and it reverted me to stable software and I cant use .1 RT anymore
like how annoying is it to get hairs out of all of the nooks and crannies
It... isn't?
You remove the keycaps, you blow them out, and then use qtips for any grime you dripped into it.
alright just have trauma from a corsair keyboard that hates being cleaned
and has been very annoying to clean lol
Download beta Wootility or use https://beta.wootility.io
i always remove all caps and use a wide paint brush thats unused to remove everything
and ur able to just brush it to the side without it getting stuck on the plate or do u normally remove the plate as well?
or is that only for deep cleans
why shoukd it get stuck on any plate
its not like i try to cram it into the keyboard. just light brushing
I have the slider enabled and I booted wootility and it reverted me to their stable software after I clicked the yellow update button
I am pretty certain its a bug
that's what would happen with my old (current keyboard) corsair strafe rgb
cant speak on lesser keyboards sorry
yea itsk
just know it has given me a hairy man much trauma that im hoping this keyboard can cure
,,,,,,,, there u go place them where u want
i have averted lots of hairy man much traumas
good
is there any solution to this or is it actually bugged
That isn't a bug. You're using stable Wootility version.
Download beta Wootility https://wooting.io/wootility/changelogs/5.3.0-beta.1
yea i guess the main thing is that i compared the 80he to two he and the two he seemed like it would be easier to blow hair out of the side
how do I tell you that that doesnt work and I already had that version
but either way disassembling it should make it ez to clean out
lol maybe a tiny bit. also needs keycaps removed
yea
I am opted into the beta and when I refresh or check for updates, it puts me onto the stable one
if you have issues find the thread for the version you have issues with in #📰│wootility_updates and post there
any electric air compressors u can recommend if u use one?
i only use a brush as the price is cheaper than any compressed air
tl;dr im pretty sure that its just getting anyone in beta to update to stable, because they released some beta features into the stable version, and they forgot to not have it override
i c
I am telling you now that I was already using that beta version and when I checked for updates, it "updated" me to the stable version they released on the 16th
Ill redownload the beta launcher but im pretty certain thats a bug
Already told you to redownload the beta software or use beta Wootility web
yes
You rolled back to previous version
yeah as an update. that never happened in the past
it always kept me in the beta versions even if they released a new stable version
do I make sense yet
I am still very certain it is unintentional
I am opted into the beta and I got overrided by a stable release that was adding features that were in the beta from a few months ago
that is not supposed to happen. it always keeps me in the beta when I am opted into the beta
do you see what I mean yet. im opted into the beta but its trying to revert me back to a stable version with lesser features and an older version. this never happened before unless there was no more betas and they decided to put the beta into the regular release(which means there was no beta at the time).
but there is a newer beta than that stable release which tells me that this is unintentional
So im nearly certain this is an accident and im not even supposed to be getting the "update available" tag
even this is telling me I have an update. im certain its by accident now
I am opted in
We got it mate, probably a bug. Feel free to report it in #1447945065010954253
yeah. sorry if I came off aggressive I was just very certain lmao
and wanted to show im not just a stereotypical user with classic error user, and that it is truely unintentional lol
Im a big fan of the 80he and the wootility gets 👍👍👍👍👍/👍👍👍👍👍 from me
hey everyone ^^ do you know some good profile for CS2 please ?
Hello is there a table with all the switches that summarize their difference please ?
Different sound and feel. It's all subjective.
ty dude
anyone know why my function key doesnt have its led on?
Aside from you accidentally locking to your 2nd layer? No.
i am simply dumb as hell, when i put new switches in i put them in the wrong way on that singular key...

thank god for hotswap
Does anyone know if the wooting 80HE module comes with foam or if I need to buy it for my GT80?
You'll want to buy the PCR case with your 80HE Module. To get the daughterboard and JST/USB cables.
Well there was no option to buy without the pcr case so that should not be a concern, does it come with foam or do I need to buy it.
There IS, but we obviously don't recommend it.
And yes - The case has foam for the PCR case.
No idea if it fits better than what KDBfans offers for their case.
Any other mod recommendations, besides switches and keycaps you would recommend?
Also there is no option for it, it doesn’t give you the option to deselect or choose not to have case.
There is. (unfortunately)
Link it
There actually isn't a "no case" option in the configurator. You have to manually remove the case from the cart after
Yes...
Thank you for sharing that with the class. I am DEFINITELY looking forward to another handful of support tickets asking why they didn't get a daughterboard with their module after the holidays 😛
Thank you for giving me the correct info.
hey can anyone give me a solid list of switchers that are compatible with the 80 he besides teh lekker switches? wanting to try somethign new.. i know gateron magnetic jades are compatible.. what about AKKO switches?
What does the full 4mm travel mean?
How much the switch moves.
Okay that was on me... I meant like since you can change the activation point on a wooting, how does that translate to what real usage you can have with those type of switch?
Most “normal” switches travel 4mm from top to bottom out when you press them, but many after market switches for HE boards went to 3.5mm
You can still configure the actuation point to whatever you want, but physically the switch travel is different
Ah see, this is the part I was missing
Thank you
why is my discord mute led setting not workling
Will the gateron jade pros be fully supported (with perfect accuracy) with the new switch selector feature?
If yes, will I have to get the switches form the gateron website or will the wooting store have special ones that suit the 80he better?
The switches on the store are not custom made for us.
They're Gaterons normal versions
what best key caps for the 80HE? my stock ones are becoming glossy and slippery now with the use loll
Best is subjective, but if you don't want shine something like PBTfans will be a good choice. Just make sure it is one of their double shot PBT sets
could you send me a link to then please
thank you for your recommendation
which ones though? mine are white at the moment
Whatever ones you like the look of more
so double shot correct?
PBT and double shot yes
If you want something basic there's always wob
Specs Simple Base = Alpha + Icon ModifiersBase = Alpha + Text Modifiers Material: PBT material Profile: Cherry profile Production Method: Doubleshot Manufacturer: PBTfans Packaging: ABS keycaps tray with designed tray cover Reminder: Only keycaps included, no keyboard Compatibility: Cherry MX switches and MX-style clon
this are nice wow https://kbdfans.com/collections/pbtfans-doubleshot-tripleshot/products/pbtfans-x-ray
X-ray Collection The X-Ray Collection is a set of minimal translucent tech peripherals for your desk setup. Scroll down to learn more, and find your local retailer to purchase from. X-ray Keycaps X-Ray is a keycap set that features a clear and white, low-contrast design, paying tribute to transparent tech peripherals
yeah you can probably find it in stock somewhere
is the light going trough the key cap?
you know what i mean
they look pretty cool with RGB I can't lie, Cam shows them off here #🔧│keyboard_modding message
holy wow that looks insane jsut like my case
wow....
are they sold out i didnt i check
canada
looks like your local vendors are out of stock - but if you're willing to pay extra shipping ilumkb, maxgaming and cafege have stock - I guess check how much shipping is for all of those
yeah i dont mind shipping overseas
which are my vendors
deskhero
thoughts on https://titannation.store/products/titan-nation-gundam-v2-keycaps-nuclear-side-transparent-pbt-1?variant=52384690340113 ?
Aifei caps are usually decent value

nuclear powered keycaps?
yeah I had no idea what that meant lol
the legends on the transparent keycaps might come off eventually
looks good tho, if u like it go for it
ah okay the style of caps with 3 clear sides is called 核动力 which directly translates to nuclear energy
wootility
Does anyone know what exactly this is? is this the same as an 80he module
Yea thats what i ordered, im wondering if "80he iso pcb" is the thing underneath or that entire module
the module
should probably just ask support to specify but takes a while to get an answer
they dont sell the bare pcb
A PCB is a printed circuit board. I doubt anybody is selling that by itself.
It's just the board w/ 0 components soldered in, no stabs, etc.
It's from wooting customer support replacement and i was wondering if theyre about to send me only the thing underneath but i guess its the entire module then
will still be the entire module
Anyone else on here use the AKKO Astrolonks on their 80HE? How do you like them?
Part of* the module.
The important part, the PCB. Minor disassembly and swapping required.
i stand corrected
Hello! i just received my Wooting 80He, ive been noticing on wootility that my actuation visual UI keep flashing as if a key is being depressed repeatedly..is this normal? Other than that it is not affecting my gameplay whatsoever at the moment.. TIA!
What mouse is that Myg? 🤔
wlmouse beastx
beast x pro :)
this shit genuinely sounds like heaven oh ma god
Gotcha 🙂
i'm about to remove the stabiliser pad my the spacebar bc of the sticking. what is the purpose of the pad and do i need to replace it?
It was put there to dampen noise a bit, but causes stuck stabilisers for some people. So we stopped installing them.
so mine doesnt have the pads but the spacebar is a bit sticky. is this bc i overlubed the stabs?
Likely
you know what woulda made more sense? swapping the windows key and the FN key
think about it, having the function key there allows you to actually use it while gaming or even just while just not having your right hand on the keyboard (i.e. using your mouse)
would be easier to do things like having a numpad on it
we can?
You can freely remap any key on the board as you want
You can also swap the keycaps over. 👍
should i get the 80he i have the 60HE
Entirely up to you - Do you miss having the keys?
kinda i am playing geometry dash and i was used to play with the arrows
so idk if i should change or not, if the performance and technology arent the same ?
So should i switch for a 80HE ?
you can make a seperate profile for gd and have arrows binded to something outside of the FN layer
thats what my friend did
i mean i do use N key as ''arrow'' on my 60HE but i wanted to know if upgraded to the 80HE seems fair or not, if the hardware is better / performance idk cuz on the 60HE there's no 8000hz (idk if it changes anything)
you wont notice a difference and anyone that tells you that they do is hallucinating
and do you know if changing the switches could change anything too? For geometry dash
i have the original switches on it
it can greaty effect how it feels but no performance differences
Hi, I'm going to buy an 80he with a plastic case (bc I'm broke lmao) and I'm thinking between the black version and the Ghost version and I want to know your opinion on which case looks better pls help me
Ghost is good for RGB if you care about that
Ghost is good for looks if you care about thaz
I prefer the frost
frost best case
what are some nice quality white keycaps
Ordered mine 2 days ago, but sadly xmas is in between, haha, Really curious!
merry xmasssuuuuu wootinguuu spirituuuuuuuuus
Anyone here that can recommend an thirdparty numpad for the wooting 80HE ?
i'm having a lot of trouble trying to remove the top 5 screws from the back of the pcr plastic case, ltt screwdriver bit for ph1 not long enough while gamersnexus too fat and my other ones all have the same issues. i do have a skinny ph0 that can get in there, would that strip the screw?
I just ordered the wooting 80he, yall think I will get better at gd with it? (Im playing ~top 600 demons mostly)
Have you tried excessive force?
is the wooting80he worth to buy?
ive heard smbd say its really good and others say its not
Its really worth
aight
if I order the 80he module, will the case come with all the same things as the full one, like the daughterboard and foam?
Is it just me or do the Tikken Switches sound higher than the V2 Its really weird because in every video I watched they sounded deeper
i have a different wooting (but the software is still the same ofc) and i can say it feels so much more consistent with rapid trigger
def helps gameplay feel more consistent and in your control
your pfp is fully in control
doogie is so tuff
While updating the firmware, the keyboard got disconnected, and now Wootility no longer detects the keyboard.
what did bro get?
Teamspeak
80he
no its black but with the white kjeycaps it ,looks so clean
am i stupid or how do i snap on the stands?
You push and massage them in.
how tho theres nothing to clip them into
There are holes in the case.
im so confused
Look at the feet. They have bits that protrude.
Those go into the holes in the case.
that doest add up istg
Photos, now.
Remove the preinstalled feet first
omg tysm

I DIDNT RELISE THEY WERE PRESINSTALLED ALRIM SOS DFUMB

thanks i think im just stupid asdf
aight
honestly not much of a difference from mouse or basic keyboards if youre at top 600 demons but its still good in the long run, also makes it easier overall so id say its a good investment
Ight man thanks, been playing on a 25$ keyboard the whole time
hey guys just ordered my wooting 80he with the double shot pbt keycap set and it says (preorder) in the description, this might be a dumb question but does that mean these have not released yet and will this extend the order time of my keyboard?
in this case the keycaps are on backorder so it's extending the delivery date
ohh okay thankyou, would you recommend cancelling and placing a new order with the other keycaps available or would you say its worth the wait if you know.
it's extra shipping costs but if you need it quick then canceling is better
okay thanks for the help!
Upgraded to the 80he
Do yall know how to make my spacebar sound better? It sounds so harsh, not sure why. Did tape-mod, inside zinc alloy case and tikken switches. Its the double shot wooting keycaps and there is foam inside the spacebar pre-installed. Do I need to re-lube the stabilizers perhaps? Or get different ones?
No we call backorders pre-orders cause the term "backorder" is for some reason not common in young folk's dictionary 
New keyboard for Christmas
Yes, they sound dry. Lube them
Other stabilizers also sound like they need some lube
get something under that keyboard 
an extra mousepad, towel or hecc even some paper towels
Damn alr I gotta get lube and stuff
You know any nice looking keyboard pad that is exactly in the size of the 80he?
sure, keebmat sells one specifically for the 80he
Ty
Oh okay that really clears things up, clearly a common example here
Treated myself to the 80HE for xmas. Wow so good. So impressed.
if it says back order you can get it quicker by cancelling and re ordering?
no, you cancel and order just the one in stock
that's why i mentioned "if he needs it quick"
ohhh alr
how would you go about cleaning the keyboard, my alt key started acting up (getting stuck)
looking for an easy fix, i got alcohol wipes / can of air if that helps
If a key is sticking, then you probably spilled something that the switch soaked up.
it could be, i do drink and snack around the pc 😉
Pick the keycap off and see if the switch goes up and down normally.
Compare to a key that feels normal.
can i do this with my fingers or should i use the tool
I mean.. you COULD probably lift the keycap without. But why?
aight ill keep u posted thanks
just use the switch/keycap puller that came in the box
also the packaging for this board is so epic
when does the wooting 80he v2 get shipped to denmark? i ordered mine today 💪
That is not a 80HE, but a 60HE v2. Otherwise there was an estimate at your checkout. Should be visible in your wooting hub aswell.
Yea I just Saw it
Thx
my keyboartd wont conect to the softwear even if i unpplug and replug it in
idk why
Can you type on it?
ya
App or browser?
uh i can type anywhere but its not connecting to the wooting software to change settings
Are you using... the Wootility as the APP - Or in a BROWSER (And in that case which?)

i downloaded the app and it wont let me connect
Very odd, if you can type on it normally.
Unplug the keyboard, relaunch Wootility and plug it into a different port. Does it show up in the connect popup now?
uh alr
i plugged it into 2 different ports and did allat and its not showing up so ill keep tryinhg
trying
Very odd indeed. I suggest making a thread in #1019755933959733258 then.
i just had to update it oops
Very odd that it worked, but wouldn't connect. Glad to hear it's working though 🙂
Anyone here that have a third-party numpad that they can recommend for the 80HE?
Panda20 is a nice solid aluminum numpad
hi again, so the followup on the sticky "alt" key, i have pulled it out, cleaned all around it, sprayed some canned air around the area
then i plug it back in, and i still have the issue
I appreciate the dedication. But you kind of failed the one thing I asked you to do.
Remove the keycap from it and a known good key.
Compare the switches. Do they feel the same or is alt still sticky? Swap it

remove that part? how its kinda stuck in there
the switches feel the same to me
i didnt spill anythign directly on the keyboard
it doesnt feel sticky, but in reality it does stick sometiems and i have to press it to "release" it
see i took alt + ctrl out to compare them
What happens if you swap the two keycaps?
Could be a tolerance issue on the ALT keycap.
the keycaps look completly new and firm on every angle, can you guide me how to replace the switch for one of the replacement switches i got here in the pack
im trying to pull it out but it doesnt move
cant find it on swedish amazon 😭
It's available on aliexpress
guys how do i pull out the switch it doesnt seem to want to move at all (i am trying with the puller that i got with the keyboard, i see there are 2 clips front and back and trying to press them in, it doesnt help
there's small ridges that grip under the white poly plate as well, so sometimes they can be bit stiff
there isn't super nice way to get them out with puller with those ones that are rather stiffly in there
other that just gently rocking up up and down without too hard movement and using bit force to pull. Though from experience this can result in bit of a breakage of those clips on the switch, but doesn't really prevent use of them. They are very stiffly in there still with everything.
That's my experience from changing switches few times on the whole keyboard
ty mate i did it with another tool the puller is crap
Some folks have easier time separating the plate and pushing the switches off from below, if you do the whole set, but removing couple it probably isn't very nice to go through all that :P. It is just because they are rather tight fit for the switches, which is nice but those small tolerances can live a bit with switches themselves and the plate so some are a bit more tight fit.
But once you get the feel for it, it's not too bad. You'll figure out how much force/movement you need to get the stiffer ones out
most of them come rather nicely
And yeah I actually have a metallic puller of my own
Forgot that most may use the plastic one, which may not be quite so good for having a solid hold and touch on it all
Got mine in May for my birthday but never posted it😭
idk if this correlates but i had the same issue when the carrier just dropped my package when he delivered it, afterwards i found out it was defect but idk if thats the same for you
How so? You mean the stabs are broken or smth?
yeah the stabs were pretty broken and sounded similar to how yours sound right now , but i dont know for sure if its the same issue i only recognised the sound
you can always try to take it apart and check the wire between the stabs, try to make sure it's as straight as possible (against table / something level but do not for the love of everything start bending it with fingers) and then lube them bit more with slightly more viscosity. Dialectic grease is what is often used with the wire / what not, but stabs in general just tend to be a bit rattling unless you try to do mods / have special stabs that limit movement and mute the sound without affecting the movement and making it feel sticky.
my 80he always trips out everytime i turn on my pc does anyone know a fix for that?
Ive just got the 80he and the razer deathadder v4 pro for xmas and when i try running cod im getting mega fps spikes to 0 has this happened to any1 else
Decrease your mouse polling rate
thats set to 1k standard im trying to find out of the change the keyboards could it be the rapid profile should i try play on the typing profile?
No, the keyboard shouldn't affect your FPS.
it also mentions polling rates i assumed it would be the same
Updated it in the wootility?
Also, it can affect fps if it's usb port that shares the pci-e lane with your graphic card.
That will depend on your motherboard
Some modern ones do with fast usb ports
msi x870e got it plugged into the usb c port
im trying difdferent ports now gunna reload the game
https://www.youtube.com/watch?v=KzifWQMSKyw&t=2s have fun checking, but I doubt that's the massive issue here anyway. But worth testing the ports, checking firmware/such is updated/drivers are up to date, etc.
Interactive Lane Maps: https://www.mobomaps.com/
Patreon: https://www.patreon.com/c/RoninWilde
Discord: https://discord.gg/VJrym8k2Pw
Chapters:
0:00 - Intro
0:07 - 1. MSI Godlike
1:19 - 2. MSI Carbon
2:17 - 3. MSI Edge TI
3:10 - 4. MSI Tomahawk
4:06 - 5. MSI Gaming Plus
4:52 - 6. MSI Pro Series P
5:40 - 7. ASUS ROG Crosshair Extreme
6:54 - 8. A...
i might need to the use the usb c to usb a adapter
mouses are far more cpu hungry though, in general anyway. Their constant movement is tracked and cpu usage can be seen to move massively if you do constant fast movements, but again, this should not really be an issue in general use as long as everything is up to date and functioning normally, and there isn't some strange setting active somewhere.
Most likely it's just something small and a coincidence
You got some of those background services in use or anything for the 80he? The usb drivers/motherboard drivers are up to date?
That kind stuff really sounds to me it's more serious conflict with drivers or something
plug and play equipment shouldn't really cause anything like that
got a ryzen 9 9900x3d and a 5070ti so i think its a software conflict ive always had razer synapse i might uninstall wootility
If you have the background utility for 80he in use, I would test removing that first. Otherwise, you can use wootility to update/check the keyboard on a edge/chrome browser and don't need the app.
Outside that background utility for the bar and other effects, it shouldn't have anything that otherwise does something you need to be worried about
even wootility app is just for when you have it active and are editing profile stuff, it's not like it's otherwise doing much
I restarted my pc after uninstalling wootility and its all good now not sure if the pc just needed a restart or it was the app but it works now thanks for trying to help
W wallhack pad i got the sp-005
what carbon desk is this?
I just got one of these what should I do with it ? Other than basic setup
It’s from Costco
just got mine (:
Maybe live in a place not controlled by a lunatic
Ik broooo
Yo can you tell me how good it is for gd
its perfect for everything, and yes its good for gd
Awesome
Bet man cant wait till mine gets it
Have you even looked at lighting setting on wootility
How to make a macro on a wooting 80he keyboard?
I just bought my wooting 80he im so excited I can’t wait till it arrives

its a christmas miracle
Guys I just bought the wooting 80 he I’m so excited
the rgb on this board is so fire 🤤
guess what I just did xd
Easier said than done 😭
Hi, i just ordered the 80he and on the website it said that they are in stock but when i ordered it now says in the order that its on back order is it supossed to be like that or?
Well did you order the zinc, black or smoke? The different styles may or may not be in stock. That was my experience anyways.
the black default one
I ordered a week ago and that was back ordered to January. The smoke was in stock though
you ordered the default one too?
No smoke. I liked the way the rgb comes through the top
It’s back ordered. See here circled in red
I think it’s only back ordered a couple weeks though
it did not say that before
it says it will come in february
yeah same bro we just gotta hold our heads down and wait lmao
fr bro i expected it to be delivered in a week or smth as it said in the estimated before and after i place the order this pops up
Estimated Delivery
11 - 23 February 2026
damn bro mines jan 25th-Feb 6th
rip
that is why im asking about it because if it would be like your it would not be move by a month
but only by a week so that is why im asking and stuff
cuz when i was ordering it did not say backorder
it still does not show it on my pc that its on backorder so it is weird
that is the thing
well my guess is since wooting delivers to warehouses in batches, it could have been just very terribely timed. Around a week ago for me it was a 2 day delivery which is crazy and the day after it went straight to a month or so
also everyone is buying keyboards for christmas yk
look it does not show that it is on backorder
intresting
then you could probably upgrade your like delivery speed if its already in the warehouse
theres an option to
I cant since im in NA but im sure you can
that is the problem it says that it is not and its now on backorder and they are waiting until it comes to the warehouse but on the odering tab and stuff it says it is in stock
ohhhh I see
yeah thats just bad timing nothing really else to it
it sucks but it is what it is
yea i guess i will have to wait 2 months for it
But they should probably update their status on the site
Cuz damn i would have only waited like 10 days not almost 2 months
yesterday
But it is now like 1 and a half month now like wtf
When is your delivery estimate
thank god bro😭
How did you order the stock one?
crazyyyy
I ordered everything stock
Us layout tho
But im in eu
why us layout
Cuz im used to it
fair
But do you think the layout matters on the delivery date
I wrote an email asking so we will see
iso nordic keys dont come pre installed on keeb idont think
Yea that is the thing you order technically a custom one and it arrives faster than a stock one
Wait are you in eu or not?
What's your order number?
EU391874H
Yeah... something's wrong for sure. It does indeed show as in stock during checkout, but then goes into backorder.
If I had to guess it's a glitch in our warehouse stocking system. It thinks we don't have any, but our actual shop system says we do. So two people arguing over which number is correct.
Likely outcome is that it'll fix itself on Monday, and is changed to being ready to pack.
💔
pack ts up😕✌️
Ok i hope so but thanks for the info i was like damn did i do smth wrong
do yall from wooting work tomorow ?
On a SATURDAY? Hah no 😄
So it should not be the 2 months right 😭
in my country some company works on saturday
Sad times in your country.
i accually have same issue as @oak hare but it will be fixed on monday as u said?
I hope* it's just a numbers glitch.
k i hope so to
i just order my first Wooten v2 and it says it will arive Mid March im looking forward
it also said in stock for both items but after ordering it said delivery in February, when i look it up in my order history, for the wrist rest it says ''pre order'' ''expected at warehouse 20 august 2025''
yea he said it should be fixed on monday
yea i think there are just bugs in theyr system as he said and all should be ready to deliver by monday
i was wondering since at the keyboard there is no '' pre order'' label if the same counts for the wrist rest
but it says preorder only for your wrist rest tho right?
cuz my keyboard went to backorder
yes so i am wondering if thats also bug
i guess it is and you will have to see on monday
i rather not wait 2 months just for a wrist rest
Hi can anyone tell me how to initiate a return process for a Wooting keyboard?
Iirc i saw the ability for that in the wooting hub, after you log in to your account and go to your exact order with the product, there should be proper options for it.
There should be an easy to follow system on the hub.
Just came in. Very pleased with it. I was initially concerned about key wobble but I barely even notice and will likely stick with stock switches.
do you know guys ? can i add a coiled cable to my order ? or do i have to order again and pay shiping again ?
If you can put it on hold and it hasnt shipped yet, you can ask support to do it.
yeah hasnt shipped yet 🙂 support on the website ?
Yeah through the hub or their email.
yeah i cant add anything maybe its because of this bug right now 🙁 i try to send them a E-mail ife there is a way to Add )
Contact them either way, they have to do it manually iirc.
damn now im realy considering that i have bought the wrong type of the case
damn the ghost looks so nice but i will still enjoy my black one when it comes
i having my second sleeples night beaucse of all this desicions xD
why tho
💀
If you are tired of decision making then just yolo 
gd is my life
what case did yall get? i got a ghost and it's so worth it
Ghost, but buying Frost in a few days 🙂↕️
the rgb in ghost is so tuff
got the frost, no ragrets
could you even say, no regerts
Tuff? What does it mean in this context?
Because yes, due to it being lighter, its better reflected.
yeah i did yolo now hahaha i have some problems to buy any new stuff i never do this xD
whats ur hardest
it’s leyak with 540 att but i haven’t felt like beating a new hardest
I ordered the stock board and it said it was in stock on the order page and in checkout it said it should arrive within 2 weeks but now in the hub it says it’s on back order and the estimated delivery is in 2 months 😢😢😢
was the pvb connection routing channel removed from the zinc alloy case?
On the assembly tutorial it is there but on my case it isnt
you eat fish while gaming ?
Yes, routing channel was removed. It caused some issues and they removed it.
should be fixed on monday
i have the same issue and i got told there is a bug in their system
so we should wait till monday and it should be ready to ship they said
Hopefully! Was looking forward to get it to my son for his bday/late xmas gift
i bought it as a gift for myself so same
he said the store system says it has stock but the one in the warehouse think they dont have any
so we will see
the neptune batch IS gonna be at warehouse by monday trustttt
Anyone else waiting to get their order shipped? Ordered on the 23 still waiting for it to be shipped... and seems like stock is scarce now yet I have an order date etc but its not collected yet? 🙁
These are the most busy days of the year for postal services
according to one of the wooting team members theres a glitch in there warehouse stocking system
Not generally. What about you? They were just on my desk as a gift for someone
no
was gonna ask how how the fish tasted
You do realize it’s Xmas right?
I do! Though when can we expect it to be shipped then?
you will find out on monday
Oh one is Nuri and the other is Porthos. Two of the best tasting sardines around, I think both from Portugal. Both about $5 or $6 each. I love em’