#🌟│wooting80he
1 messages · Page 348 of 1
than dont buy hexagon hole mouse 😉 or at least cover them "nice"
sacrifices have to be made to get a 31 gram mouse
alternativly dont touch the hex 😛
did you weigh it ? its not 31
You bought a mouse because it was very light, and then proceeded to add weight to it to make it comfortable? 
that would be for you
dont trust OWN and know...
bought a 20 gram mouse yesterday, waiting for it to arrive
all im seeing is a covered mouse with something looking like duct tape wich is horrid in itself and preperials worth 500€ on a desk not worth 100€ Prioritys 😛 get me right i dont say anything bad about the choice i made similar but i keep the rest matching^^
and seeing that poor mouse taken hostage hurts
i moved into college accomodation and the desk is small here
old desk
also my mic alone is €500
like i sayed wrong prioritys 😛
What are your favourite switches for the 80he?
raw switches for me
Ii might be to old for this stuff - but why do ppl put pcs on small desks?
i have a 2.2x1m desk and still keep it down becouse i want free space
they sound really good paired with zinc case
I kind of like the raw l50 switches
lekker with 70g springs are fine enugh for me ^^ but im curious about the new ones
I want the Ncase case for the 80he, it looks so clean
Split Wooting when? 😉
moonlander X Wooting PLS
That would be awesome
Is that still coming out 
Idk
any recommendations for keycaps for the wooting 80-HE ghost?
Just got my wooting 80he and aseembled it lfg
ngl pugging in the board was stressful yall gotta make a note of which way the cable should be facing lmao
anyone have a good cs2 profile they recommend? tired of my trial and error
wdym?
feedback time:
-it's not actually 80%, i have to make an END mod top key just to account for that
-there's a lot of wasted space here. between the arrow keys and the PG UP PG down area is a lot of empty space. this could have been filled with...an end key...
-if it was actually an 80%, that emtpy space could have been filled with just 3 more media keys or something that could THEN be turned in a symetrical mod top Numpad
-no volume knob. sure i could re-assign some keys but i think you could have made a tiny one fit somewhere (like in all that empty space between the arrow keys and page row) (or a tiny one at the top bevel area above the pause key)
-space bar is louder than the rest of the caps and for $300 that bothers me.
-honestly i wish i didn't have to buy metal to get a matching white for my caps. it's heavy
#1141096226884956181 would be where to post this
Knob is planned as an additional accessory in the future https://wooting.io/knobs
Picture of what knob would look like on 80HE
ya and they have a single key one coming out as well, but i feel like they removed one colum too many just to save a tiny amount of space with a lot of tradeoff
people already have smaller options from this brand if they want that
Well I think the initial plan was to launch knob with the 80HE but it wasn't ready in time for launch
Hence the 2x2 design which perfectly fits the 2x2 knob inside it
You can see my second post in the photo sharing area, which is the second one I made
and my first one https://discord.com/channels/167181566978555904/1422157006835417148

is that oled or ips?
https://milktooth.com/products/ws-flux Is this currently the most expensive and high quality HE switch out there or is there something even more premium?
If you want flux, I’d buy off aliexpress if not in US
They’re way cheaper there and you can get deep clacky version for a less sharp pitch
oled
how is it going so far?
like is it good or are there any noticeable problems? as i am looking to buy one
ye from eu and what do you mean by deep clacky version, is there different versions of that switch?
Yep. Deep clacky version is a tad less sharp and high pitched
you mean sharp like the sound that it sounds sharp?
#🔧│keyboard_modding message here’s a comparison
Left most pink one is deep clacky
Right most is regular flux
Middle is tikken
And aliexpress price is also like 40% of official pricing
So instead of like 20 bucks for 10 its like what 8?
$70-85ish for a set of 90 vs $200 lol
damn thats really a cut in price
Where can I buy nice key caps that fit the wooting 80he
Like these caps kinda
Thanks
What’s a good switch to buy for the keyboard? Don’t really like the too high pitch ones
If you don't like high pitch sound, then probably wait for the new Lekker Tikken switches
When are they coming out?
Newsletter just went out so we’re allowed to say this month sometime
Since that cats out of the bag
Will they be on the wooting website?
Got the keyboard today and I am very happy! Thank you for your work!!
First thoughts? I just ordered mine hopefully i get it asap
Quality.
I'm excited for you to get yours! It's such an experience!
I just got the "basic" kit so no fancy mods yet but I am excited to have started this hobby.
Zinc Alloy (Black)
Bought a dust cover from these guys in the UK. Sharing the link as it might benefit people like myself.
Made in the UK and designed for serious gamers, the Decksaver GE cover for the Wooting 80HE delivers elite protection for one of the most responsive keyboards in the game. With its cutting-edge analogue input, rapid actuation, and custom mod potential, the 80HE is a competitive beast—but that power deserves real-world protection. That’s wher...
My only fear was ppl saying it feel cheap but i got plastic version and planning to upgrade in the future
I been a using the blackwidow keyboards for too long and i feel like this would be a very nice change
No, you're fine! I came from a backlog of broken SteelSeries, Razer, CORSAIR keyboards. This truly is a league on their own but this is my first "high-end" keyboard. My previous keyboard was the GEN 3 Apex Pro TKL 2025 ver., but even that feels a lesser quality than the one I received today from Wooting!
Yeah i feel like this is gonna be a major step up
It won't be too hard to upgrade in the future!
Plus they have got plenty of tutorials, beginner friendly videos, etc.
The huge plus is obviously the community, whom have all been welcoming and helpful both publicly and in DMs!
My thinking was , if something breaks , just change that single piece
Yes and it's not so easy to do that on other keyboards, right? I had the same thought!
Which cannot be done with alot of big names
100% agree!
If it breaks time to buy a new one
Exactly my thoughts too!
Did you JUST buy it? We have a 30 day return if you're more into the 80.
Yea I just got it Last thursday
I threw away the box and everything else with it yesterday
ok mr macos 8 looking table man
had to do a double take of the image cause i only know it in the orange/yellow and black version
It's the email friendly version. The dark mode one looks kind of jarring, when you need to use it in a support ticket 😄
see at first i thought its some windows 95 looking programs requirements or smth
the color just looks spot on
Cals made it, so I'll defer to their thoughts on why those colours 😄
Cals, a well known light-mode user....
ok then its prob cause gimp also still looks like its from 1995
what stabilizers should I get for gateron jade pro switches? I don’t know much about what stabilizers are good rn, but I heard they should be long pole for the 3.5mm travel distance
mine are oblivion v3 but thats high end ABS Keycaps im not sure if someone who doesnt nknow where to buy them want to spend that kind of money on them - you can buy almost any keycap set with TKL minimum since the wooting has a great layout for that
my suggestion are KBD Fan Keycaps since they are high quality for a fair price
https://keygem.com/products/pbtfans™-retro-dark-lights?variant=44256150192396 are great start or
https://keygem.com/products/pbtfans-iron-dolch-pre-order?variant=54434886910220 is although great
*
but if you realy want the upper class GMK it is and stays..
https://oblotzky.industries/products/gmk-cyl-oblivion-v3-1
for my setup you need Regular base + Hagoromo NORDE (for german nordic layouts) or ANSI for ansi layouts
Bring the aesthetic of the Mac OS Dark mode to your setup with PBTfans` Retro Dark Lights keycap set. Crafted with durable PBT material this double-shot keycap set ensures style and comfort with each keystroke.
PBTfans Iron Dolch To create their unique visual expression and metallic-like luster, we have infused the raw plastic material with a special metal powder.However, due to the properties of this material and the injection molding process, certain characteristics may be present. These are not quality issues. Please read
How do I remove the really pingy/hollow sound of the 80HE spacebar? I added foam and tape inside the keycap and it helps a little
I also bought a nuphy ghost bar, I hope that helps
I just recently recieved my wooting 80he zinc alloy all black and recently heard about the 60hev2 is it worth returning I prefer the tkl just wondering if the diffrence is that big
If you prefer the size of the 80HE, then no, don't return it. 60HE v2 will have same performance.
it arrived 
It just arrived and you already stripping it booty naked
nah it's ISO so it arrives naked lol
hello guys any one know where i can order key caps to wooting 80he?
#🪛│modding_faq there are links etc. to find here (: (check the pins)
thank you
bought my wooting80he but im only getting it on late october... dont know if i can wait that much LOL
im planning on making an unboxing+review vid since theres almost no portuguese/brazilian portuguese vids
how is the pcr plastic 80he straight out the box no modding?
Whats the outstanding original role?
keycap name?
glorious rgb v2
what is that under g502plus
I know nothing about keyboards but I really want a different color keycap then just plain black. Is it not just putting it on top of the switch that easy? Someone help please
Also is the from geon raw he switch Linear A good switch if I don’t want the sound to be too highpitch?
It is pretty much that easy, the Geon raw HEs are quite loud and high pitched so I'm not sure buying them will achieve the sound you're wanting
The Lekker Tikkens might be more your style they are a deeper sounding switch that's coming out from Wooting shortly
guys my V and T buttons suddenly decided they want to be pressed 0,4mm and 1,3mm respectively at all times? Swapping the switches to new ones seems to do nothing. Is there anything I can do about this?
Try replugging or different usb port
https://cdn.discordapp.com/attachments/970244246869254174/1423385469156200570/rn_image_picker_lib_temp_be51fecc-0685-4ef6-9dea-29077af1856c.jpg?ex=68e01e85&is=68decd05&hm=749cf84fbac63c0c16fbd4e5fa1f8b32ba0887b006124527f54ec4cd0f705f4f& sorr for the phone Screenshot but anyone have anything similiar happen to them? I've tried updating the firmware wich ended up failing and now the troubleshooter fails aswell
Try different port and cable. Avoid using a USB hub or KVM switch.
If this won't help, restore on another computer.
Switching ports doesn't work and it's also directly plugged into the motherboard on All attempts.
"Just use another computer to restore" isn't really an option
80% better
Can you try restoring with another USB cable, if available?
perfectly? it's massive. i dind't buy the 80HE over the 60 to get rid of some of the keys.
Can't please everyone.
Please make a support thread in #1019755933959733258
ok thanks
hey i have these retro dark lights, they kinda suck!
alot of them have holes them from their moulding that shines light through really ugly, and they go smooth incredibly quick
you can see under the D and O they have little black squares, those are holes the light shines through and its really ugly...
Im building my 80he and im assuming the piece of foam in the case is supposed to stay there? Sorry first time building a keyboard and idrk what im doing
Optional, but there is a video guide if you're not already following it https://youtu.be/LNa5wuqiFVY
This tutorial shows you how to assemble your Wooting 80HE module in one of our compatible cases.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out...
Yeah I’m following that one, it doesn’t mention that at all. So it’s like a personal preference choice?
Will dampen sound and get rid of some the higher pitched noises
thats moldinjection problems they all hafe that you either know that and dont buy or ignore i think they look pretty cool but ofc not qulity like noprmal pbt fan pbt keycaps or gmk abs..
I mean it's advertised with them, it's not really a design flaw - the renders do look different though but that's pretty common
What do we think, just got mine :)
Do you guys prefer zinc alloy or gt-80? I wanna hear your thoughts on them
Very borderlands of you
Where did u get the keycaps
Zinc, but is also because I type a lot and the gt 80 has a very steep angle so it’s quite uncomfortable for me.
Is it worth investing the extra 100 Euro for the zinc alloy over the pcr plastic?
i don't really game that much anymore atm but when im playing i play all kind of games like fn, league, hades, tft but i do use my keyboard allot by just browsing the internet, chatting on discord and reading manga, is it still worth investing the extra 100 euro? (i don't plan on modding anything and just using it out the box stock)
do u want the case to be metal?
thats all it matters, just a luxury
it feels and looks very nice imo
doesnt matter if you game or not
but in the end its up to you to decide if its worth it
or a coin could too :)
Idk how solid the pcr plastic is, if thats solid enough i doubt id spend the extra
both are good
Fair
I can get the pcr plastic and just swap cases in the future if i feel its lacking
indeed 
does anyone have a suggestion against the keyboard sliding too much on the desk?
deskmat
blue tack
I saw a video about someone showing his setup he had a extra mat just for the keyboard in its perfect size, couldnt find anything about it.
Keebmat
that sounds like a super niche thing
yup exactly
They have 80HE edition too 
yeah, i see thank you!!
the weight is worth it for me no sliding on the desk whatsoever without intent
Fair, also do u have the wrist rest? And would u recommend it
I currently have the lekker v2 60 in my 80he but i want something a little lighter and great for gaming. I play fps games like cs2 a lot. Would the Jade Pro or Lekker 45 v2 the better pick for gaming? Or do you recommend something else?
never said it was a flaw, its caused by the injection. because the transparent tops / backlight the holes look really ugly
Check out this site: https://link.wooting.io/soundtests
yes i hafe the wristres but i think a wodden one wich fits is better the silicon got spotting where i sweat wich is not rinseable and it got a bend in the middle of the keyboard wich annoys the hell out of me eventhough its small
on the other ahnd it feels good and fits well except the mentioned problem its a bit long for my personal taste a bit shorter would hafe been better
here you see all 3 issues i hafe
I see, thanks for the info, i think i will spend the extra 100 for the alloy since this will be my keyboard for the next idk how many years, for 26 € i will try out the wrist rest and if i dont enjoy it or it starts to wear out i will buy another
as long as you not into 2nd cases you can buy the plastic and spend 120€ for the alloy
that way you get both 😉 and if you dont like plastic sell it
Hmm im pretty clunky and def will break SOMETHING if i tear it apart 😟
Ill think about it some more and do some research
It’s just one cable, which is a bit sensitive. That’s all. Since it’s only one cable, ask somebody to do it for you after opening it.
I received my 80HE somewhat a year ago. I now want to clean my caps. Is there a good video-guide you guys can recommend?
dishwasher
Fuck no.
You pull them off using a puller, soak them in LUKEwarm water with a bit of soap, scrub any that have grime with a toothbrush and leave them to dry on a towel.
Can a dishwasher clean your entire mechanical keyboard? Some of you might of asked themselves this. Well, so did I. So I tested it out! But don't do this yourself, as cleaning your keyboard in the dishwasher VOIDS the WARRANTY and could easily break your keyboard.
⌨️ Wooting Two HE https://wooting.io/wooting-two-he
✨ Follow our socials! ...
😉
But don't do this yourself, as cleaning your keyboard in the dishwasher VOIDS the WARRANTY and could easily break your keyboard.
hoinestly as long as you use the low temperature mode and no dishwasher detergent but some milder version your very very save in the cuttlerydepartment
i mean look how clean they come out in thwe wooting video 😛
This seems to be a good advise. i guess, i will find a guide on youtube from you guys on how to do that 🙂 thank you!
True - Though I'd still recommend a good soak with a bit of soap. Water alone won't necessarily cleanse the keycaps in a washer.
3 steps and its all good
1, choos a programm wich doesent DRY (bvending warping ) and is low temperature
2. choos a pulver detergent without tohose aggresiv 3 in 1 solutions and specialy no bleach
3. use the cutlery basket and keep space and long keys for handwash (bending risk is higher)
the risk lies not in the usage but in human error
specialy pbt like wooting are fine abs can hafe more problems
Can any1 recommend good quality transculent keycaps for the wooting 80HE? Im looking for some Inspiration i actually using the ghost case if Maybe some1 even got one matching the ghost case color
Here's my ghost and frost builds, if you want nice RGB frost is a lot nicer imo
The X-Ray Collection is a set of minimal translucent tech peripherals for your desk setup 👉🏽 https://www.modmusings.com/x-ray-collection
🛍️ Thanks to @shopify sponsoring this video: https://www.shopify.com/matthewencina/
▬▬▬▬ Video Overview ▬▬▬▬
In this video, I share the year-long journey of designing my X-Ray collec...
pbtfans xray is pretty cool
xray are recommended a lot as well yeah
Wow they lookin insane
the frost there is at like 30% brightness
Where did you get that case from on the frost
you can but it on our website if you get a module
The keycaps too?
the keycaps are these https://en.akkogear.com/product/asa-clear-translucent-keycap-set/
but you can find similar ones if you search for PC (polycarbonate) translucent keycaps
the dark ones on the ghost are ABS
Thanks alot I gonna Order them as i can see them on yours they looking super clean
rip they all out of Stock, and the only Store on XRAYs listed for germany doesnt sell the XRAY Collection smhw
hi
#🌈│wootabase_profiles and check pins
would u recommend getting a big mousepad that sites under the keyboard like urs or just a norma one is fine
strange question OFC i would recomend what i like ^^ but honest answer here are the advantages and disadvantages
Advantages
- sound more Dampend of the keyboard i prever it like that in fact i hafe 2 mousepads on top of each other
- you can press the mpouse inside the material for stopping power mostly you do this intuitiv with a lightweighted mouse
- i prever having my arms touching cloth and not wearing sleves
Disadvantages
- it gets more dirty more cloth to clean
- not as mobile
i think it looks cleaner givs a better pace and you hafe way more arrea to move the mouse thats why i go for it and specaly the XXXL variants are great
the disadvantages don't really concern me, i clean my desk/room every week and i don't need to take it anywhere
https://shop.x-raypad.com/shop/x-raypad-aqua-control-ii-gaming-mouse-pads/ my favorit deskmate cheap and super big - 3XL Extended / 47.24" x 21.6"
here you can see how it looks on a 2,2m x 1m table
alright, thanks
can someone give me keycaps ideas
is that a desk with a chassis or just a solid table with table legs?
a stand-alone height-adjustable frame
i have a pretty bad desk rn, its kind of an l shape and the main part is only 70cm in depth
looking for a decent 160x80 desk but for some reason its impossible to find a solid top with frame
any theme or colour?
anyone use cerakeys keycaps on the 80he im thinking of getting a set cause they look great but am unsure if they will be a viable option for the keyboard
for gaming? never! for typing? yeah not without at least minimum 80gsprings or better 100g
alright good knowledge to have ill sit on it atleast and see how badly I want them lmfao
but than again why buy wooting for nongaming?
^^^^^^
Any games block or ban HE?
Software features, hardware warranty, insanely long product support, comfort in typing
I just wanted to make a point: you should not ruin the gaming side of a keyboard with decorative keycaps.
Honestly, I mainly use my Wooting 70% for non-gaming tasks, but I’m a bit obsessive — I run it with 0.3 mm actuation distance and 70 g springs.
The result? I no longer miss letters like I used to before switching to the Wooting.
Of course, most Hall Effect (HE) keyboards could achieve similar performance, but since I also game, I appreciate Wooting’s software and overall build quality.
uh i just downloaded the new software of wooting on my 80HE, and keyboard worked fine. i then decided to download windows update and my keyboard is like spamming the 'q' button, and when i type numbers, different numbers come up, when i type the letter 'J' a 'J' appears, but also comes with spaced letters, some letters dont even work. im now typing on a ducky mini with the wooting cable attached to it, so its definetly the keyboard not the cable
any help?
oh yeah, i deleted last windows update, restarted etc etc and still same issue
any1 with a fix?
Please make a post in #1019755933959733258
any tbh
honestly just pick a website in ur region and find one u like lol
misc :D

someone has this thing? i realy like the idea Binepad KnobX1 -- https://mechanicalkeyboards.com/products/binepad-knobx1-rotary-encoder-knob
i saw that the other day and htought its kinda cool
goddamn
especially for the pricethose binepad knobs
that is a very old pic of alex
there ones with buttons too
yeah, we're selling them for a while now lol
introducing BNK16. BNK16 is a powerful, customizable macropad with dual knobs,haptic feedback, and wireless control, built to handle demandingworkflows for creators and professionals. switch layers with a turn. In BNK16, the knob cycles through 4 distinct layers with tactilestops. Each layer is indicated by a unique LE
if they replace the shitty dsa caps with proper low profile ones, this would look fire
cool but too big 😉 i like the simplicity of a knob with 4 layers
specialy for video forward backward play or sound lout silent mute
https://binepad.com/products/kn01 what about this one?
International Vendors: US: Mechanical Keyboards Europe: Candykeys Japan: Fumo-shop KN01 is an industrial design knob for daily usage. It is made out of 6061 aluminium which is CNC turned and milled from a solid rod. You might have used other knobs but they are not as stable as this one, because this one uses a bearing
but is it fluent or is it stepped?
idkn just found that thing^^
Rotary Encoders: Detent and clickable button
L'indispensable de tout ingénieurs audio. le Binepad KnobX1 est la solution pour un ressentit proche du hardware des potentiomètres de compresseurs, égaliseurs, etc... et tout ça facilement!
Today we've got MORE cool tech gadgets under $50 in an episode packed with some fire. Download WhatNot & win a free Switch 2 during my stream! 👀 https://whatnot.com/invite/randomfrankp
🔥 Midnight Camo Bundle: https://us.x-raypad.com/randomfrankp-x-x-raypad-ace-control/
🔥 Wireless Phone Monitoring Screen: https://amzn.to/40qgoim
🔥 Nan...
hmm
Following the development of Wooting's knobs has been a wild ride of discovering how many different kinds of knobs there are
yeah, i usually hate the stepped potties with like a limited amount of steps
and a lot of the knobs use those
I agree with that sentiment, but that is a very divisive subject haha
hah yeah most likely
it says wobble free and you see it wave when he turns it lol
actually no this one doesnt say wobble free
looks like theres not a single review of the KN01 knob lol
well i just ordert that Binepad knobX1 lets see if it comes in use or goes back ^^
that one is although cool https://drop.com/buy/megalodon-dual-layer-knob-macro-pad?defaultSelectionIds=992938
Hey all. Im having an issue with my 80he keycap. I use the wooting for geometry dash so im pressing the w key very hard. I think it's starting to wear as recently the keycap will just sometimes pop off when I press it down hard, nothing seems off when looking at the bottom of the keycap but im not an expert so idk. Anything I can do to fix or do I need a new set?
Could be a cracked stem on the keycap. Look for signs of a hairline fracture vertically along the inside of the stem.
Can swap the switch to a new one, to rule that out.
If your keycap broke, hit up support
https://support.wooting.io
Pick the category and issue you need help with, and we'll guide you through the process.
Im sorry im a total noob with this 😭 is the stem on the keycap or the switch?
hes talking about the keycap
I thought so. But then why would I need a new switch?
to confirm its the keycap's fault
Oh lol I see now
Im not sure what i should be looking for haha. I think this looks normal but the key does kinda move if you press down and wiggle it. Ill see if it happens if I switch the w and e keycaps or something
This picture is of the bottom side view of the keycap stem. You'll want to inspect the side of the keycap stem to try and find the cause
I see. Sorry I've never done anything with keyboards besides dropping in the switches + keycaps lol
No worries, every day is a great day to learn new things 
Place a small piece of plastic wrap on a switch stem, then put a keycap on it
yeah but pretty unnessary you will know in 2 steps whats the cause
step 1 change the Lekker Switch with a other one'
step 2 change W and Z keycap and see if it happens again
happens step1=switch Step2 Keycap Step3 (not at all) fixed or combination of both)
I have jade pro switches but I think it's the same?
same rutine
would frost case with black key look good?
Yeah the stem was cracked. Ill reach out to support. Thank you!
Gateron Jade Gaming, Pro & Max
which the best?
for wooting 80 HE
does anyone here have issues with their 80he disconnecting and reconnecting constantly
its been happening over the past year and slowly getting more frequent
no but sometimes i need to pull a cable and replug it wto make it work i highly asumed the cable is loose but im to lazy to check behind the pc..
my 60he has never had this issue, but it could be anything
but yeah i know what u mean
Could be a slightly loose JST cable inside. Could be a bad USB cable. Could be a lot of things really.
Support can help you go through possible causes, and help resolve them as needed.
quick question? does 8000hz polling rate work on mac?
Im about to purchase a wooting keyboard after doing a lot of research - When customizing the board in the picture it shows that it has no keys on it, if i were to order it would it come with keys or just be the board as shown below:`
You can Chose between 2 types of Keycaps and no keycaps
At the moment, what i can see on your Screenshot is, that you chose no Keycaps.
So the board by default comes without key caps?
As in you need to pay to have keycaps
Yes, you can order the ISO variants without keycaps, because that's how they're stored to allow easier mixing with different language keycaps
Gotcha thanks
Yes but the price is lower to account for that
One message removed from a suspended account.
#🌈│wootabase_profiles and check pins
Even better.
One message removed from a suspended account.
My current 80HE is working flawlessly but I want to buy another keyboard anyways. Is that weird?
I have an 80he, wooting one and a venom 60he and i will buy the 60he v2
And thinking about buying some other boards
Completely normal if you are in the hobby
Yes
Not by much, its like having another set of clothes to me
yes, but some people here have pictures with two of them, so imo if you can just do, why the eff not? 
not at all
welcome to the hobby
is it just me or does the wootility color dropper thing just not work at all
Just you, probably.
idk why it makes you download it but essentially it doesn’t show the color you’re actually pointing at and even if you click it doesn’t actually do anything
you can pick the color of another key by right clicking it
the dropper thing is for you to pick colors from your wallpaper or something like that
your video is super strange though
I'll see if i can get that to happen for me
i cant get the cursor to leave the app tho
and if i click outside regardless it will fk up the cursor in the app

wtf the cursor disappears completely that's super odd
yea it does
this is probably because we're using super old electron
(for win7 compatibility. will be removed soon, we're updating it in v5.2)
hopefully that helps, as the dropper is not something we can control, it's just a standard browser api
we dev on the web platform mostly, so electron bugs can sometimes be found a bit late 😅
wooting 80he with a split spacebar is all i want👀
yeah this is app
ill just do it on the web version ig
Just ordered my first Wooting 80he, ghost case and Geon Raw switches. Yet to be received.
Now i found this 1 yr old secondhand 80he, zinc raw, travel case with both L45s and L60 v2’s for $300, which is around the same price i paid - slightly cheaper. What’s your thoughts on second hand? Does the zinc weigh up? Im considering the used one but would love some advice.
Ths used one look pretty clean.
Sorry if this is the wrong thread.
Can they provide you with a copy of the receipt from us? Cause you'll want the warranty.
Yep, they can.
Not sure why this is attractive if you already have the keyboard? And roughly the same price.
Gets them a zinc case for the price of a plastic
Exactly! Haha, same!
do the 80he ship with foam in the spacebar now
damn i didnt know u could get the frosted case only if u got the module 😭 bought it alrdy gg
some of the models yeah. It's been rolled out to all lines, but whether every lines stock has caught up isn't a sure thing
@midnight iron would it be possible to swap everything?
you'd have to go to wooting hub and put a hold on the order you did so it doesn't ship, then cancel and re-order most likely is quickest way - but i'm not in support so i'm just giving a rough guess of how it works
ah i read somewhere that cancelling makes wooting have to pay like some fees also ty ill put it on hold i forgot to
Only if you keep giving us work to do.
Looking at buying 80he... If I buy the module as a package and build it myself - Does it come with everything when ordering? As in pad etc? cheers
Yes.
Cheers
module needs case, keycaps, switches and daughterboard (comes with case)
it already includes stabs, plate, silicone gasket pad
change the file type to mp4
What’s a really good linear switch for my wooting 80?
The soundtest database needs more soundtests
Thanks
It's a pretty new database will definitely be added onto to include more switches in the future
More sound tests will be added later this week

Sno will update it later probably
never trust a list when its made with non exisiting switches or from the producer of the switches OR BOTH
how can the lekker tikken be rated ?
I mean, if that's really the case he'll put lekker v2 in the quiet list and geon raw in all rounder with lekker ttc as best for stability.
thats a list with a switch wich is not yet in generall production
Because Sno got them ahead to review for the recommended list
He puts every switch thru the same test and gives them a grade for stability and everything else
and since when is getting something "preproduction equalk to the finished product?
never trust a list like that simpel
Nobody is forcing anybody to trust the wooting list, that‘s just an easy way for people that keep asking in here
Having a switch on a COMING SOON bit at the end does not invalidate the list as a whole. And as always keep in mind these switch differences are entirely subjective in the first place.
Question, what were y'alls delivery time for the wooting 80he? Waiting for mine and im afraid itll take too long since my current one is no longer functional
The guy who makes the list is a wooting team member who tested all these switches
a very trustful and reliable person
anyway to sign up to be notified when the tikken releases?
Nope.
is there any way to add a delayto one of the keys in dks like say i want to bottom out, wait 200ms then have it do whatever i set it to?
or is there a way in mod key to activate the tap key every time you click no matter if you hold or not?
essentially im tryna find a way to have it so if i hold/fully depress (either works) the grenade key it switches to the grenade and throws it but if i tap/dont fully depress it just swaps to the grenade and doesnt throw, but it has some time to pull out so i cant have it swap then throw instantly or else it wont work
There's no way to do this with DKS you'll need a macro program
The best you can do for this is adjust the separate actuations and controlling how fast/slow you release the key
yeah i tried that, it does work somewhat but its kinda jank and isnt really better than just switching and spamming click
We’ll have more details later this week regarding tikken launch, I even made a fancy banner/infographic
The tikkens I received are the finished product fyi. If you have suggestions for what should replace tikkens in the overall recommendations I’m all ears
Tikkens are there because there’s very few to no clean sounding 4mm closed bottom switches with a deeper/muted sound note
i dont think there are any
so wooting may be the first!
Are gmk keycaps decent?
I’m on the official website shouldn’t be a problem
what official website
ok that is the real one
there is one very prolific fake website
that has a misleading url that a lot of people fall for
I see thanks for the heads up
also, depending on your region, it may make sense to buy from a regional vendor for you
Do you know a trust worthy website? I’m from us so shippings gonna kill me
novelkeys, omnitype are both US based
Ok thank you
for a more complete overview
Any keycaps that are better than gmk? Want to compare
depends what you want but gmk are the gold standard for keycaps
keykobo and pbtfans are other popular options
I saw keykobo too ok thank you for your help
theres also osume if you like that look
Is daily clack a valid website? Saw a color set I like
Keeps popping up in the sponser section
would u recommend buying the l45 v2 for the 80he
is that it? or is there like a performance boost in either one
youre not gonna rank up 5 divisions based on your switches. We have a general recommendation sheet, but in the end its up to you which one you prefer
ok thanks
yes but they are from australia i think
I changed key caps and immediately went from Faceit 3 to 10 /s

According to tracking, my Wooting 80he and Wooting 60he+ for my girlfriend are scheduled to arrive tomorrow.
I'm already very excited and looking forward to it.
An order must be placed by the end of the month.
My girlfriend would like the aluminum case in pink.
She will receive the modified Wooting 60he+ for Christmas.
Huh
pink 60he is really cute yes
Thank you 🙂
Just need pink keycaps in iso german Layout 🙂
But i cant find some 🙁
Yeah language specific keycaps are always harder to find
Yes thats true
How do the Tikkens compare to the current Lekker V2s? Like in touch force? More like the 45s or 60s or not comparable? Apologies if this already answered.
They asked in a channel that doesn't get Tikken switches 
You'll have to wait for specifics for release, though we may have talked about some aspects on livestreams before.
You could ask in #🔧│keyboard_modding
actual bargain icl
My wooting 80he got shipped!! Anxiously waiting for it
I don’t like reviews or tests of products that aren’t actually available — especially because mass-production quality often differs from the first batch or pre-production units.
I also don’t trust manufacturer-supplied lists or early “preview” tests.
That being said, I really hope they sound great; and even though they don’t use a cboxed design for less wobble, they’re certainly interesting.
Still — in principle, any list including unavailable products should at least mark them as “estimated” or "if theye finished prodduct is like the onec recived" etc
Finally part of the crew ✨ 💪
awesome
I only list finished products basically. There are pre production versions of the tikkens but they were not tested by me nor used for the tests/recordings.
the version tested is literally the same release tikkens that were received by me in the full boxed packs with final materials.
Yo the white zinc case is 50% off on the refurbished store!?
What should I upgrade first the case or the keycaps? Or are they all preference
Monkies random question
Can I turn off all rgb in my pc without downloading any softwares?
Like my ram specifically
Is gmkkeycaps.com a valid website to buy gmk?
No
Do the official website ever restock doled out products or they just make new designs?
Was looking by at the gmk cyl abyssal
You need software I’m pretty sure
No.
You'll typically need to download software for each kind of component to control (or disable) RGB.
the web wootility ig
no they have gmk.net and vendors
its usually in group buys
so once its gone it will not restock unless the artist who commissioned gmk to make it, does another run
if you define PC as "the box where my cpu is in you mostly can
Step1 (simply remove all ARGB Headeers from the Mainboard
Step2 Enter bios and disable the RGB of the mainboard most can do
Step3 --> Grafikcard has RGB? ~~Manson ~~Mansen is right you need software or same graphics as mainboard and hope its available in the bios settings too
if you define PC as the hole shebang..yeah Mansen is right
It's an E...
manson pls
Marilyn Mansen?
Possible to have the "Mode"-key to rotate between 3 profiles? or any other function that does this? (not Fn+1,2,3)
Bind Cycle instead of Mode in Wootility > Remap
Perfect, thanks!
There it is 🙂
I was see the same thing. I was wondering if it's a V1 or V2
It's v1
looking good!
Thanks
But its stock xD
Just looking for some nice Keycaps xD
I'm gonna be keeping stock, I'm not much of customizing ngl..
Just looking for some Side Printed Shine Through keycaps for me
And Pink Shine Through Keycaps for my Girlfriend
Hope that works out great for you!
Thanks 🙂
She will get a 60HE+ for Christmas
In a Pink Aluminium Case with a Pink Wrist Rest and Pink Shine Through Keycaps
Is there a set date of the week or month that new gmk keycaps are release? Or is it just random?
They're run on group buys so when enough people sign up to buy and they hit the minimum order quantity the set is run, usually a 3-6 month pre order. Some stores will buy extra stock but it usually comes at a price premium
I see thank y ou
are there any discount codes out there for novelkeys?
whats the difference between v1 and 2? are they both compatible with current 80he?
Yes.
I see
Difference is in coating used. v1 has a softer coating that can be more easily scratched by metal objects
*easier. I have a V1 I no scratches 
Same here. I haven't been able to accidentally scuff my white yet - except for on the back in the USB hole. Classic "blindly poking till it goes in" consequence 😄
My 14 year old brain is amused by that sentence
kind of sucks that the refurbished shop came out right after I bought my 80he
shipping is almost as much as the case
Unfortunate timing
truely 
hi im new and I have some questions with the refurbished shop
what do the layouts mean and why does the price change
Older = cheaper
ANSI is American layout as shown in the picture. ISO has the L shaped enter key.
ANSI comes with the keycaps. ISO does not because it's shared by many languages.
No keycaps, cheaper.
Btw mansen why no 60he avr or twohe avr?
Because we...have none in stock?
I thought there would be few atleast
60 AVR was only the very first batch. And 2HE changed to ARM after a year or so iirc.
Might be some that haven't been refurbished yet. Would make sense that we do newest to oldest I guess.
Yep
Another forced change so to speak. The supply of AVR component ran dry overnight so we had to move fast.
But from current view. Moving to arm was good choice
Definetly
We had always planned to swap to ARM, but it was an "in two years" plan until it was forced to be a "do it now or you make no keyboards" plan
Flaretech all over again, heh
buying an avr board today would be a bad idea when it comes to software features as it's unlikely to get any of the new stuff
Gunna disagree with the phrase "bad idea" provided that the cost of the item is appropriately reduced with the expectation that future updates will be hamstrung
Anyone have experience with rappy snappy etc in csgo and got banned or kicked?
Any form of SOCD will get you kicked
rappy snappy not, snappy tappy (socd) will get you kicked from lobbies
Ah ok. Thank you 🙂
Isint both variations of socd
Pretty sure that Rappy Snappy got bundled into the same detection mechanism and also gets a user kicked, even if there's a solid argument to be made that this still skill based and should be permissable
And where to use SOCD if it gives a small advantage in other games
man I swapped the cable to other one (both ones are original wooting) I have and my leds are still blinking.. idk if it'll disconnect like with other cable (it dc'd like twice randomly)
But besides of all of it, I still love it. Maining it for month
It will do more harm than good espeically in cs
I reconnected the connector thingie I think it's fine now, I think it was loose
tho I have to say this is the hardest part changing cases
wich literly states that its super easy;)
Took me like 10 minutes 😭
Gid Good - joke aside always be carefull opening make pictures and watch a video there are like a lot of wooting videos about exactly this 😉
I'm just too physically weak
ew
How can i change the color when i press a button? Its always Yellow 😄
\
why is it showing .5 when im not pressing anything?
i tried setting the actuation point to lower than .5 and nothing happens so i think the app might be bugged
Replug the keyboard
worked, thanks
Is there a good 3ft usb c cable i can use with the 80he?
do I need to relube after spilling water on it? I took off keycaps and switches and part of the frame, but after I let it dry am I ok to keep using it?
Only if water got into switch
Used my Fn key and felt a weird... crunch? It was a really weird sound and feel. Afterwards, pressing the top of the Fn suddenly feels and sounds like there's foam? I removed the cap and nothing there while I expected a bug corpse. Any ideas? Lekker V2 L60 if that matters.
most likely because I saw water on the pcb, what lube do I get?
Hey monkeys
What RGB software you guys use
I recently formatted my computer cause I just kinda had a lot of dogshit stuff on it like armory crate so im wondering what’s a good rgb software that isn’t all like bloated
OpenRGB, Artemis? Kind of depends on your hardware and what is supported - and how much time you want to invest.
They aren't exactly drag and drop.
I use signal rgb, so I can control all the rgb in my competitors in one software
i use free signal rgb becouse i just want my fractal north orange golden puklsating and it does that without much invested time
Hey everyone, i've had a 60he for a long time now and was looking to upgrade. Does anyone have any opinions on whether or not I should just wait to get a 60he v2 or build my own 80 he?
If you're okay with the current keyboard when it comes to the layout, feel free to upgrade to 60hev2. If you want something bigger, go for 80he
ok dope, as long as it was pretty much left up to form and not missing out on any major features im all for the 80
just ordered the keyboard can’t wait
Iirc, both 60hev2 and 80he differences is only layout, not performance.
Yeah, 60HE v2 and 80HE will have the same performance and features. 60HE v2 comes with improved Lekker switches, but you can also get those switches with the 80HE module starting October 16th.
Tikken* switches.
Lekker Tikken yes 
Tekken!
Tekken Likker 
Thats a classic i'M personally familiar with, had T3 on my PS1, played it way too much.

Yoshimitsu green form 
titon realest when?
anyone know why i cant rebind the arrows to the letters on the keyboard and have the same function...
i am playing geometry dash.
you can
thats weird
bc my old razer keyboard would work with this but its not working with the wooting
if you bind arrow keys somewhere they work as arrowkeys
well guess its just a problem with the game and keyboard not working together some how bc i did it exactly right and im getting no movement
screenshot of the entire wootility window with the config showing
win shift s
what on the left side yeah that is working still
wait so undo that
and maybe it works or
there is like no save button stg
we have a lot of inactive profile preview functions but remapping is not previewed for inactive profiles
mb how do i make inactive and active profiles
i see a bunch of options to choose from but i dont see how to guarentee an active profile
from what i thought tho it looked like i could only have 4
ok then im just slow sorry
we are working on a way to have game detection so it can autoswitch the active profile to inactive ones as well
best keyboard ever really enjoy the custom activation points and rapid trigger
Does anyone know if this can be done and how to do it? So not really sure how to set this up. I want to make it do that I press the W key say .5mm and it will be W+Ctrl then from .5mm to .5mm from the bottom it would be just W and then the last .5mm L shift+W. Can this be done?
Dynamic Keystroke is a powerful feature where you can assign 4 different actions to a single key. So based on how far you press it down, it will register different actions and combinations.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
TikTo...
holy 8 minutes?
^ try this
I tried that and it doesnt to the creep = L-Ctrl+W part
it does it at 0.5
i dont think u can do it 0 to 0.5
I didnt think so, Thanks
Can the wooting 80he connect to a ps5
Is your Wooting keyboard not responding on Playstation, Xbox or in your Bios? Disableing NRKO will resolve this issue.
➤ Follow Wooting online: https://links.wooting.io/?id=VYzZf
➤ Twitter: https://twitter.com/wootingkb
➤ Instagram: https://instagram.com/wootingkb
➤ Discord: https://wooting.io/disco...
has there been any new cases? i remember the gt80 was the only decent option when i last checked here
also is raw he still considered the best switches?
gt80 probably still the best option unless you like the looks of holy80
as for switch recommendations, take a look at this
how up to date is that switch sheet
kinda dont wanna believe raws got irrelevant in a year
like by 2 days ago
owlab ti he replaces raw when it comes to sound and feel
imagine the Tikkens were $25 for 90 switches that would be insane value
Oh, that's interesting. Would you say it's a significant enough difference to upgrade from raws?
whenever i type an @ symbol my keyboard just automatically like hits a random button also?
see like that it just decided to hit tap (sorry for the ghost ping btw)
nah, raw is still nice as it is
ok. thats nice to hear. i was overseas for like 5 months and have the module, gt80 and raws waiting for me to finally build the keyboard
was just curious if theres already better stuff out there
There isn’t a big difference between Raw and Owlab Ti, but there’s a significant difference in stability between Raw and Wuque Flux.
ill look into them, but i cant imagine how they justify their price
Official pricing is absurd. If you decide to get them, buy from AliExpress.
RAWs were replaced as top stability switch back in February of this year when TTC POM launched. Now there’s been so many switches that released that there’s infinite possibilities.
The switches that would give you the most improved feel over RAWs would be probably TTC POM/Deep Clack Flux (same price as POM on Aliexpress) or the raptor V2s (can develop spring crunch YMMV) @night jewel
Yeah, but TTC POM sacrifices sound and feel for stability, whereas the Flux remains very smooth and clean sounding with minimal stem wobble.
also prelubed
Hello guys, I got my 80HE with lekker l60 switches one week ago, and, since I play only game where I use arrows, R+L, I noticed the change in sound.. It's not so smooth anymore, I don't like it tbh.. So I wanted to swith to L45 to see the difference, but I only got 1 switch hahah, I read it's normal, but it's really unlogical to me ffs, they could give at least two to try.. but anyways, does someone recomend some "smoother" switches to buy ?
Also I saw you guys are ordering on AliExpress, is that really a good quality?
Hope Varedis is here x)
The only difference between L60 and L45 is the spring weight, otherwise they're the same.
Thanks
I just found this on AliExpress:
HRK276.35 | Unionwell Polar Pro+ Magnetic Linear Switches - 35g Pre-Lubed RGB Gaming Keyboards, Free Travel Adjustable for Magnetic Keyboard
https://a.aliexpress.com/_Eurq8Yc
Are these for example original Polar Pro +? I don't know where is the best to order hah
Yeah, seems legit but they don't sound clean at all, because of the split stem design and they are very expensive. Check Wuque Flux "Deep Clacky" on AliExpress instead.
hm, i think the sound profile of raw/owl suits my taste better - whats a realistic price i could get them for on ali?
the wuque
if you know the price on top of your head, if not ill look it up later
maybe if the price is ok ill order them and feel/listen to them in person - if theyre like the most sensibel upgrade for raws
they're like $0.75/pcs
well thats way more reasonable than 180
Hahaha those two literally sound the same to me... But thanks, I'll order these wuque flex then hehe:D
In person they sound very different. This is how chattery Polar Pro sounds (J key is Polar Pro) #🔧│keyboard_modding message

Ye a big difference, and the others on video are wuque flex?
$1 per switch, might be able to get it for cheaper depending on your region
Nah, it's some other switch, not sure.
Wait no, this is not deep clacky 
There it is
First half of the sound test is deep clacky flux
I’m biased but Deep clack flux is my favorite switch hands down out of all I’ve tried (Jade pros, Raws, POM, raptors, owlabs etc)
Doesn’t move, imo it’s the best $1 per switch on the market for stability to sound combo
Sounds great
Nice, I'm ordering it then:D
Curious to see how your board shapes up 🥶
What do you mean hahah
As in overall build/theme of your board
theyre 200€ for 90
lol
i only have two options in germany
Ah Germany...
the links dont ship to germany
Tuff
Oh, I'll use them for arrows only🙈
those switches had better make me food and read me a bedtime story 
yeah i mean at this point ill keep the raws
but ill check the keyboard sites in germany
maybe someone got them stocked
or europe in general
Tough to get them in Germany for a decent price. Just keep using Raws, nothing wrong with them, they’re still solid. Grab DC Fluxes if Wuque drops the official price.
i guess, yeah. im not gonna pay over 100€ for 90 switches, thats just mental. id test out the fluxes, since y'all say theyre worth it but welp - cant have it all i guess. ill assemble the keyboard and tune it with raws for now, it prolly will prolly feel perfectly fine and im just fomoing. while browsing through the eu shops i saw the sw knight stabs got a v4 already....would you know by chance if i should spend time looking up if theres a big difference betweens v2 and v4?
sorry for the last sentence, its kinda messed up - late over here
Not a big difference as far as I know between v2 and v4, both are good.
aight, thanks for the quick inputs, really appreciate it 🙂
See if raptor V2s are back in stock, they’re decently cheap and worth trying to see if you like how they feel
i have been using the raws since i switched from the Lekker L60 v2s
looking fw to tikkens 
yo quick question does it matter if switches are way too easy to pull out on specific keys compared to other keys
cuz ive noticed that taking switches out from my up arrow key are a lot easier compared to every other key
and it feels like the switches start to wobble a lot more
ill look into them for sure 
Anyone know how to get analog keys setup for Battlefield 6?
I have WASD set for Gamepad, and in the Wooting app I can see it correctly functioning with % as I depress the key further and further
In-game, lightly pressing the W key makes me walk at full speed for some reason
Did you disable keyboard keys for those keys? (There's a toggle in Wootility)
Or unbind wasd in-game from movement?
This may be a silly question, sorry if it is, Razer has this cool feature with the RGB where it reacts to the game, is this something we can do too with the keyboard?
Currently the keyboard has no way of talking to the PC to make this happen as everything happens on the firmware stored on the keyboard, however a background service is being worked on which could make something like that possible
You may be able to set it up with some third party apps now though
That behaviour also relies entirely on a game adding support for it
And most games that do are specific to one brand, so you need third party apps anyway, and you can already make the Wooting keyboard do that via those.
Ah okay, thank you both for your responses! @jade widget @buoyant solstice
Can somebody check if this wooting profile fts fighting games?
Code: 43d4056bb133410d84a65f9d25d15d981143
Is there a way to remove the yellowing from the white wrist rest? (Other than washing it.)
wootility desktop lets you enable chroma connect, which can let wooting devices get the colors from this razer chroma integration. It's pretty limited by razer though, so you don't get the full integration sadly
there are community apps that will let you get the full integration if you know where to look.
But yeah, most games do it for one brand only, which kind of sucks
I need help I have Wooting 80 he switches gateron gade pro I want to do what would feel like gx blue who knows how to do it?
I'd ask over in #🔧│keyboard_modding
Replug the keyboard
I'll see if I can unbind WASD in-game
Can't really disable keyboard keys because then I can't type
Time to use voice chat? 😛
I think unbinding WASD kinda worked. Some really weird behavior when lightly pressing the keys...character moves for a couple frames, stops, and then starts moving again.
I made a custom curve that seems to make it much better. Adjusted the 2nd point until it improved
I dont think so battlefield allows double inputs
Seems to work now (somewhat)
I acquired a batch of Wooting 60HE+ keyboards from an internet café. When I took them apart, I noticed their PCBs came from several different batches, including 2024.04, 2025.02, and 2025.04, with the 2025.04 batch being the most numerous. The Hall Effect sensors on the 2025.04 batch are marked 'LQ404,' while the older models have marks like 'LP403' and 'LP405.' I would like to know if there is any performance difference, as they were all bought back at the same price.
No performance difference
this discord desperatly m isses a Wooting_Generall talk...^^
So... #💬│general 😄
yeah that jpke evaded you with 100% precision 😛
aside from that i think it originates in that its "keyboard talk" and not "just chatting" 😉 so ppl expect it there
Oh I got that just fine. I'm just being a boring person who points out that thing DOES exist, and people should use it 😄
"I closed the window during a firmware update for my Wooting 80HE via the web, and now the ER key on the keyboard is showing a red light, essentially bricking the keyboard. Wootility does not recognize the keyboard, so I don’t know how to fix it. What should I do?"
i love yoou
Guys, is it better for you to wait for the Wooting 60he V2 or get the Wooting 80he?
Depends which size you enjoy
60HE v2 is an upgrade to the 60HE+ to go into the same level as the 80HE performance wise
So the 60he v2 & 80he are similar in performance, just different form factors
But I heard about a feature of the space bar on the 60HE V2, which would be to add two more keys. In addition to the jump key in gaming, you can add crouch and lie down keys to the space bar. Will this feature only be available on the Wooting 60HE V2 or also on the Wooting 80HE?
Currently only on 60HE v2. Wooting hasn't announced any plans to release split spacebar 80HE.
Price is TBD, will be announced shortly before the Founders' campaign.
can I preoder then or is it exclusive to some people?
Not right now. Pre-orders start November 6th
okay
Ok ty, will it be launched with the aluminum base first, followed by the zinc alloy version? I will also need to consider the price
No Zinc Alloy option. Only plastic and aluminum.
Ah, I understood that they were launching the basic aluminum version
I think it will sell out the moment its on pre order
so I wanted to know the more details
so I can just do it fast
It won't be a small batch, you'll have enough time to pre-order it
Batches are limited but there are an unlimited number of batches
setup has seen better days
Sell the investments and get that setup looking good😭
Bros got gloves worth a used/new car and had his mic stood up in a mug
But is the space bar a hardware or software feature?
im in uni accomodation so my desk is small
other than than what could i buy
Does your mic arm just not support the weight?
Why is it in a cup lol
i have an elgato mic arm from my old setup but doesnt fit on this desk
Dorm setup moment
yep lol
Please speed i neeed thiiiss
Doesn't work
Stills enablerd, maybe it's because its not detecting my device is connected?
Yeah, maybe. Check the top left in “My Devices” Is there a green dot next to your keyboard?
Which browser are you using?
brave*
Try different browser or a Wootility app
kk app worked thank you!
Odd that Brave shows it as disconnected. Try removing your keyboard in Wootility > My Devices and then connect it again.
Now it detected it, idk why but works 😄
Ah, good 👍
Brave's privacy shields can block WebHID
I'm also using Brave and it has never blocked WebHID
Depends on how the privacy shield is configured. Or if it's on at all for the Wootility website.
@lime falcon can you answer this for me?
It's a hardware feature
Requires a PCB designed with the split spacebar in mind for the physical extra switch and room for stabilizers
Oh ok ty
what games allow SOCD?
Pretty much every game that isn't cs2 or Osu
I just bought my first 80he
i like the implication that you will buy more
One year ago I swapped the LS45 springs for 70 g—best decision I’ve made. After a year I bottom out far less, and the keys aren’t tiring; if anything, the opposite. I use the full travel better, and the board feels lighter. That’s why I’m now considering 80 g. With HE switches, stepping up in spring weight feels like the logical move.
I like your dust cover
i like your dust
just pm me your home adress i will collect it and send it after 10 years no problem at that
dust_02 mentioned
Short question
I saw on the wooting Website at the Review section for the Gateron Jade Switches, that someone put ls70 springs in them.
Does that mean, the springs you can buy at wooting are fitting?
Sry if its the Wrong channel 🙁
Thanks
I misread that as springless springs. Very confused

springless pings
i would not be so sure the stems from the lekker are a bit bigger fact is he needs non magnetic springs thats for sure 😉
just saying its not a given that the lekker springs fit just becouse both are he switches better not asume anything ^^
OG lekkers are made by gateron and so are jade switches
the springs are specced to be compatible with any lekker or lekker derivative switch
if your so certain why answering with should fit without explaning more 😉 that sounded like a "wild guess"
you keep moving the goalposts
Don’t use ‘should fit’ if you’re certain. State the spec. Clear statements stop needless ‘but what about…’ follow-ups.
Honestly modding questions such as these tend to get more precise answers in the aptly named #🔧│keyboard_modding
I know our springs fit the Tikken switches (but vary slightly in dimensions iirc?) and they were made by Gateron, so should fit their less recent switches at least like the Jade Pro we sell.
tikken springs are longer than the ones from the spring packs
Once I get a pack of Tikken, I'll try swapping the spring and see if it feels right. Not sure if anyone but.. @midnight iron have any they could compare with rn
its just a few days and we will all be able to try
i would actualy be relay intrested why no boxed design switch did wooting activly decided they dont like it ? i dont see a downside at all but it reduces stemwobble increases stability sound is more crisp...
sound and feel is often negatively impacted by box/walled switches, so it's not always a gain
mhm i think that will happen when production is not in a perfect state and tolerances can cause it so yea but than again gateron usaly knows boxed switches pretty well Gateron Box Ink V2 as example are pretty decent ; so when its done good its realy nice
Hey guys is there like a good quality keycap set for the 80he with a harry potter theme?
What do you guys think about this cover? 36 pounds with shipping, are there some cheaper deck savers ? I can't find anything on Amazon.de
- https://www.aliexpress.com/item/1005008797655449.html
- https://www.aliexpress.com/item/1005006916601563.html (Full envelope, dimensions 375x175x48)
Might be cheaper
Ye it is, I can order some lingerie for gf too with extra money left🤣🤣 thanks!
😳
Ugh can’t wait for it to arrive
just bought the 80he 🤩
You will be happy trust its such a good keyboard
Hope u like it
Anybody know what type of foam it comes with? I want to dampen the sound as much as possible with Owlab HE
EPDM foam
I'm thinking of swapping it to Poron foam, is that a good way to absorb high frequency clack sound?
that moment when you think about upgrading your pc equipment and you hafe allready EVERYTHING in almost the best variant and the literly only upgrade you can think of is a 'DMN CUPHOLDER on your desk AARRGGG
My testies itch. Help
Don't be weird.
? I am asking for help


Hi raquel
hola
where tikkens
tomorrow
With the frost plastic case is it weaker then the normal plastic I saw a video on it and they said it cracked when assembling and that wooting made a video only how to assemble the frost case
There is no difference between the frost case and the other plastic cases, as it relates to durability and quality.
We made a specific video for it because that particular case is only available separately and not preassembled
In my mouth (i eated them)
Alr thanks man
noooo give em back
man got HE-1s already, goddamn
ayy
Anyone got a frost case build they can show me I'm trying to decide between white and frost
GGs guys!
I posted a rlly simple one, I got my first 80he yday
There are plenty in #1070668460905988106
those are some interesting keycaps
Fire where did u get the keycaps from or should I stick with white do u think
Aliexpress for like £10-15 I forgot the exact price but it was really cheap. White is also a solid option too. Before I purchased my 80he last week, I saw a frost case build with glorious polychromas keycaps and they looked really good
ty bro
Honestly though you should check around. They might be even cheaper on other websites like temu etc, I just don’t use them. If you do want the link though I’ll hop on my pc soon and send you it
i would get the 60he v2 prob but 2 reasons my birthday is one day after the pre order so i want a wooting keyboard before my brithday and the 80he has all the same features as the 60he v2 besides swiches nd im changing them anyways
just ordered the 80he am really hyped for it
Fair enough bro glgl
They charge all the taxes and stuff in checkout
Not at point of delivery, so you don’t have to worry about any hidden charges and yes i do
If you want lekker tikkens they will be sold starting tomorrow
i realy wonder if the upgrade is worth a shot^^ although why the springs are not lubed.. and last but not least do the lekker springreplacements fit
Lekker springs fit, they have same diameter
Length isn't the same though but that's fine.
Ye ik I'm prob gon get geon raw I want great sound and performance as they are basically the same performance wise
not for me than i want the same bouncyness wich is great
wooting needs to give us matching springs no way around that 😛
this isn't normal right
taking apart my 80he to swap out the switches and noticed this
man i was being so careful too

all the other clips are fine tho
so it should be alright?
I finally got my 80he
How many days did it take
Give me a minute let mecheck
12 days aproximately
damn
Got my 80HE and really pleased with it. Added some custom designed caps with it.
noice
has anyone tried different stabilizers on thier 80he and noticed a large difference?
looking at these just cause thier on sale on drop
sorry im not super familiar with modding stuff the most ive done is hand lubed my switches.
What's wrong with your stock stabilizers? Also those are plate-mount stabs, not screw-in.
Stock stabilizers are good, if you lube and tune them they'll sound as good as aftermarket stabilizers. https://youtu.be/vxHb6CJc9V8
Here is how I mod my stabilizers. I get asked this a lot of my streams and honestly, I figured why not just record this so I can link this video instead of having to re-explain it every time. I hope you enjoy it. Please remember this video is only covering lubing and installing, some stabs like cherry clip-ins, you'll need to clip the bottom leg...
thank you ill try this :)
nothing wrong with them though just curious, this is by far the best keyboard ive ever had lol
although before this i had a glorious keyboard and man, no bueno
Yeah, lubed/tuned stock stabs are good, but if you still want some aftermarket stab recommendations, take a look at Swagkeys Knight V4 and Typeplus x YIKB screw-in stabilizers.
i also did not realize about the screw in part aswell haha
but yeah ill take the time and make sure these are lubed well and see if i notice a difference
anyone know how to break in the switches fast
Anyone else's wrist rest have a mind of its own when gaming
I am using Typeplus stabs since they are my go to in almost every board.
Can't wait for the Tikken switches to be in my 80HE
Hello, do I need 70 or 90 pack for tikken with my 80he ?
90
thanks!
Yours looks like mine lol
does anyone have good recommendations for a replacement case for the 80he to buy in Europe? I dont really like the bottom lip of the 80he, i like to rest my thumb against the lower bottom and the two "overhangs" dont feel good
What do the new Lekker Tikken Medium keyboards have over the Wooting 80HE?
the 80he ships with lekker v2, tikkens are a completely different switch
see here: #🪛│modding_faq message
Where is Lekker V2?
what do you mean by where?
The tikken is a switch, so is the lekker v2, if you mean entire keyboard then that's a different thing to what is launching today
today is solely the tikken switch only launch
Yes, I wanted to know what features the Wooting 80HE switches have compared to the new Lekker Tikken Medium switches
the differences are in that photo
basically the reverse of that photo
the only similar part is that the lekker v2 are well lubed and 4mm, but the rest is new




