#🌟│wooting80he
1 messages · Page 333 of 1
Where can I buy these keycaps specifically for 80he?
Any set will work as long as it is mx compatible
Anyone has any recommendation of sets/websites? would appreciate it
Gmk mtnu is nice i hear, they have a bunch of different colorways

yes!

you can bind it in wootility
remap tab
then there is Home keycap in the box, if you want
thank you sir
Hey, is the Main differance between the 80he 60he and Two He just the size? (If we ignore the Customizability factor)
Size and mounting style
Gotcha
Also some performance differences but those are unlikely to be relevant
Hey all, just one quick (probably stupid) question, but can't hurt to make sure. When buying the 80HE module, but no case or anything like that, does it definitely come with that little cable that connects to the daughter board?
I did watch some unboxing videos but none of them really made this clear
It is definitely not
It seems like the 80he hasn't been tested by the dishwasher yet)
Daughterboard comes with the case, same with the cable. Not the module
That's all good, appreciate the quick response, I will plan ahead
Grabbing the PCR case for 10 bucks with the module is a GREAT deal. You get daughterboard, JST cable and a 2m high quality USB cable. And you have a spare case, if you ever need to send in a more expensive case for warranty.
Ahh damn that would've been good to know hahah, I probably should have asked these questions before I ordered
If you ordered recently, you can reach out to customer support, and we'll honour the price of the case, so you only pay a bit more shipping.
I will do this now, it's been less than 24 hours since I ordered
Might be close, I contacted and they told me to put it on hold just to be safe but it's in the Ready to Pack stage so I don't think I can?
What's the order number?
EU333276H
I've attempted to hold the order from shipping. With a bit of luck, they haven't sent it to packing yet, since it's the weekend. You'll receive further assistance via email 🙂
It does indeed say hold for me now, I appreciate it 
Could I have a link please
Almost no keycaps are. Typically only "gamer" brand, very regular and basic keycaps are.
Ohh I see 😿
Good morning!
i hope tomorrow i will get this keyboard
#🪛│modding_faq they have a website link with names of vendors
you decided to go for 8k pulling?

at the end i just prefer that layout, not for the 8k 
thats very sigma of you
xD
only if i buy the alloy case
oh yeah i forgooor
still a solid option

its very easy to change switches and case. They have videos on their youtube channel for modding
just need a screw driver
yup yup
W, getting another case dont worth 100 extra €
and extra, u will nptoce the difference between 1.6k and 8k
Will you add guys a spitting spacebar on 80he in the future ?
I mean like on V260he
It will be cool
wooting 80he, got 84 switch ?
84 ansi
85 iso
87 jis
okey tq
how do i set a toggle rgb
A what now
example caps locks toggle's its own rgb to indicate its on
i want to set a toggle for my mod tap key
You can't. That only exists for keys that the OS keeps track of for toggle. So... the lock keys.
damn
ah whale
ty mansen man
2 weeks with the wooting80 experience and i will say its amazing, almost life changing haha.
probably my favorite keyboard ever owned
waiting for my current board to sell to buy another 80HE xD painful waiting
Im about 5 months in after having a 20 dollar keyboard for 7 years
quite the upgrade
is there any way to get something like socd in gampad mode?
well i kinda need the opposite like i need 0 movent right before a switch
but even this mode ogff it still does not do it
has there been any mention of the split spacebar making it to the 80HE?
would have to be a new pcb
Is there supposed to be any grip with the ribbon to the back of the pcb? I'm pretty sure this is the daughterboard that came with the gt-80 and it's loose to the point it's difficult to set in the frame without it disconnecting or it'll disconnect occasionally during use
how accurate is this because i live in the same country as wooting
could it be possible that it arrives tommorow
Likely no, they need to dispatch it first and the courier needs to process and bla bla bla
80he > 60he
yep, by about 20
Yes the 80HE is indeed larger than the 60HE
its fact
Is there a known list for 3rd party cases for the 80He?
kbdfans gt80
kbdfans holy80
aim bone80
Thank you for the save again shf 🙏
Also the 80He module doesn’t come with a strap does it? 😔
None of the 80HE SKUs do
Rip😔
what switches do you guys recommend ? owlab ti he, geon raw or jade pro
Of those, Owlab Ti
do you have other recommendations that are better or is it just personal preference for what switches to choose
Owlab Tis are a great choice. I also enjoy KoM POM. Different, but both are great.
And it's definitely preference
Though of those three you mentioned, Owlab is a newer switch that has fixed some of the issues of Raws and Jade Pros. Can't really recommend those over Tis.
ok thank, if I go for owlabs ti he, should I lube the switches or do they come pre lubed?
They come well lubed, no real need.
yeah
nice! and do you have any experience with 3rd party case like GameZone Bone 80 or kbdfans gt80
I do not.
looking at getting the 80he what switches does everyone reccomend? 🙂
Look up about 5 messages
what are your favourite sounding ones
I don't have a favorite.
i’ve heard people say the PoM’s are for typers while the ti’s are for gaming? is it just to do with the actuation force
Gt80 is the goat of 80he cases atm
The gateron jade gaming switches are really good too, underrated
better than aim bone80 ?
sorry i should of Clarified the ones that are on the wooting website
raws are great
Any recommendations for a deep, poppy, creamy-sounding HE switch? I like the Jade Ruby sound but it feels a bit muted
Lekker Tikken's when they release in the next few months. Worth the wait.
Thanks
black or the raw zinc alloy case HMMM
gateron jade pro good ?
hi, is this a known issue with the black zinc 80he?
got this one back in march
does this even fall under warranty?
should've gotten the raw zinc version
this certainly warrants you to reach otu to our support
sure, will do that, thanks a lot!
(This is from the karmic debt you incurred by using pudding keycaps) 
I personally do not think so
that's fine, this stuff is pretty subjective
i often work and play in the dark, so custom sets with elaborate designs don't work for me due to no shinethrough
also they're expensive af and i can never find any that i actually like, might just be a me problem
ok, sorry, one more question - where can i find the serial # of the case?
By flipping it upside down.
Do keep in mind that the standalone cases have their own SN. So your PCBs SN will not match up.
You can always check the PCB's SN in Wootility.
i see i see, thanks a lot!
hi
I saw other people with this… according to other messages I have read, it’s probably due to a bad batch… so reach out to support for sure.
One question, Does the Wooting 80% PCR plastic box come with the cable to connect it to the PCB?
The case contains teh daughterboard, JST cable (that you're referring to) and a USB cable.
Ok ok perfect
is that in the photos on the website you can't see the cable.
What do i have to do now?
reply to it if you have questions and ask those questions
I have no more questions, is the order already confirmed?
this is giving i don’t read the pins kinda guy
thats sounds like a question you could have replied with
and support can easily check this for you
i’d reach out to be safe the 2nd paragraph states to reach out if you want them to proceed.
Ok, thanks😅
so 👍
when is it gonna get packed it has been saying this since friday
where are you from?
Today or tomorrow most likely. The warehouse doesn't work weekends.
does the wooting 80he module variant come with the foam and stuff too? Or is it only the board / case that I choose?
for the module variant it does too?
yeah It does
aight fire thanks
it should get expedited today
okay thanks man
dudeee
all white wooting looks nice
im getting my 80he for my birthday
my birthday is may 25th 👍
me may 26
awesome!
happy early birthday
i would get the all white 80he but it costs too much money
yes hahaha
whats funny is that i’ve probably spent more money on 2 keyboards and 3 sayo devices than how much a white wooting 80he would cost lmao
yes you right
i bought a k70, huntsman v2, and all colors of the sayo device
anyone know how long it would take for keyboard to come if I ordered today
need to know so I can order my other stuff
me 20 days
what country
malaysia
Hey I literraly just bought an 80he and was wondering where I go to see what batch mine is in
Access and edit your orders, connect your discord, and manage your Wooting account.
hey guys, dumb question, my 80he just arrived. Is there an on button somewhere?
What button?
to turn it on
no, you just plug it in and it works
dont have to install the software either?
ye downloading now from https://wooting.io/wootility
thought the keyboard would atleast work without it though, even if you didnt have all the fuctionality
Software is not needed for it to work
ok well ive fucked somthing then, or mines a dud
You just change settings and its saved
can you remember when you bult yours, its only one connection cable right?
yes, JST cable
rip, highly doubt i fucked that
put all the switchs in because i thought they might need to be in to create a circuit, still nothing
check jst cable
Plug it in and push it in the connector with your nail
works, thanks mate
Thanks lol
what are the quietest switches compatible with 80he? other than tape is there something that I can do?
Raeds or Matthews
Both will give you a significantly muted/quiter experience
Hello guys I ordered the 80he module without case and keycaps and I can't find a cable or dongle that comes with it. Am I blind or is it supposed to be like this?
cable comes with the case
have the same issue on my black zinc. open a ticket and you will get your money back
Sad, so a normal usb-c cable should work right?
Or usb-c a
as long as you have a daughterboard to connect it to
tho if you want to use rgb with tachyon mode you may need to get a high quality cable for it
If you removed the case from your checkout, you're not receiving the daughterboard, JST cable and USB cable.
So you'll have to get those from elsewhere - or hold your order and get in touch with support to re-add the case.
hi guys, do you need to clean off the factory lube before you start lubing the switch? For the new gateron 45 & 60 lekker switch
no
WAWW
gateron genty is more quiet on release
ouch
Gateron Genty is not a quiet switch at all
If any chance 60HEv2 better than 80HE?
It's smaller and lighter in some cases and newer switches. But it's less keys
Smaller and lighter is a downgrade
Different keyboard. But also true 8k polling now. Just depends which format you want.
Not better or worse
8khz is already smth people argue about if its better or not
yo guys how do yall like ur wooting 80he?
very nice door stop
Can't complain. Daily driver since before release.
Working good here and enjoying it and the format. Slowly testing different trigger points and seeing how it feels. Certainly nice to be able to use and adjust if you feel something is too easily triggered or want to really bottom out it.
My forever keyboard
hello how long does the step pick & pack usually take
i live in the same country as where wooting is based idk if that matters
doesnt matter. can take up to a few days, can be done today
Are there estimates how long the module deliveries take? Website said its in stock.
Checkout will tell you
Big, blue box
You can use the hub on the website to check on your order as well
yo guys does alluminium case comes with another dust cover? mine got devastaded ;/
The "dust cover" is there to protect switches and keycaps in shipping. A case has neither and does not include one.
well it did a good job protecting the keyboard from dust
hey mansen do you have dimensions of this dust cover so i can make one myself?
❤️
has anybody made a 3d model of the gt-80? wanted to print a cover that fits exactly lol
following up on this, i reached out to support and they offered me a full refund for the price of the case, which i really appreciate 
now i'm wondering what to do with the case itself
i might order the raw zinc version instead
i was also thinking about trying to diy remove the coating, since it's stripping anyways, and maybe try to figure it out from there, but i'm not really confident i can do that without making things worse
It‘s on wooting‘s github
You could see if you can get it cerakoted
Tho before that they might have to sand blast it or something to remove the black
its just the original case not of the gt-80
Oh oops i read 80he for some reason
My bad
You can probably find the dimensions for gt-80 on the store page or you could send kbdfans an email, maybe they can help you
looked into this and it seems complicated and dangerous, might wanna reconsider
I think one person here did it before
@exotic cove you did cerakote on your case right?
This was a black case previously
Some milling done but that is cuz im spaced out
The guy here charges roughly $179 converted to usd to cerakote
But he is a professional and does keyboards all the time
He showed me this matrix corsa he recently did
Damn that is pretty
Ah thanks, a bit confused because in my hub the date is set later then if i see the estimate if try to buy a new one. But at least i know when to expect it now
Yo Hello! Just wanted to confirm if the 80he has got that feature where when you are holding down a key and Press a Secondary key (whilst still holding the first one) it takes use of the secondary input negating the initial Press...
Yes, SOCD (Rappy Snappy)
Guys, need some help here. I’m lubing all my switches. Since everything is dissembled right now I thought I might as well do the tape mod. But do I have to insert the switch before the tape mod?
Shall I put the pcb back into the case then insert switch, dissemble again to do the tape mod?
Potato potato
But you know that 80HE already has inbuilt tape mod, right? With the sticker on back of PCB
That seems like a different thing, this doesnt Pickup the input based on which key is Pressed last, it Picks up the latest input which is more at depth. I dont want it care for the Depth only which is Pressed last...
I confused my terms SOCD (Snappy Tappy) is the one you're after
There is Snappy Tappy
What in the world are these Nicknames 😂
lmao aight Imma look into the software Setups and Come back here :) If theres a Preferred Guide do lmk!
This overview video covers all the core features of Wootility and shares some tips and tricks to help you get the most out of it.
🔍 For detailed tutorials on specific features, be sure to check out the playlist below:
https://www.youtube.com/playlist?list=PLUwyc5IrGTnx-hnPyJ-TOT6LRMw6XGcUr
📝 Patch notes https://wooting.io/wootility/chan...
A quick comparison between Snappy Tappy and Rappy Snappy!
#gaming #tenz #fps #fpsgames #fpsgaming #esports #overwatch2 #overwatchclips #fyp #foryou #valorant #csgo #razer #wooting #wooting60he #wooting60he #keyboards #gamingkeyboard #mechanicalkeyboard
This Video is a Great Demonstration! Aight Wooting it is :D
Thank you!
Ooo and One last thing, these Features arent limited to Models yea? Like 60he differes from the 80he and Tkl?
All wooting keyboards have those features.
Even their first optical keyboard afaik
Wooting One
Nice
I know about the PET film. But the effect to the sound is different and I prefer the tape mod instead
60he jade pro
80he lekker v2
THE KNOB
THE KNOB IS REALLLLLLLLL
THE PROFECIES HAVE LONG FORTOLD UPON THIS DAY
Your wish has been granted
time to wait until next year I guess
now i can grind out spin rhythm levels with 10x more fun :DDDD
Oh yeah, because gta 6 is coming and there's a chance death rate is coming down, the chance of a very bad thing going to happen is also very low.
So time until knob is safe, prop
just ordered mine 😎
What do you think the chances there will a a 80HE v2 with the big knob included?
Just buy the knob separately and install it onto your 80HE?
I have a 60he(idk where id put the small knob on it if I did that), I've been thinking about a 75% but if the 80HE were to have a knob I might look this direction.
If you can click + rotate a small knob, you can replace ESC key with it
I hadn't considered that, maybe making the click just just be esc and just turning the knob all the way down instead of having mute that would solve that. I'll have to move my favorite key cap elsewhere but that's no issue. Thanks
The knobs are hot swappable and backwards compatible so the idea is you buy the existing 80he with the knobs to go with. No need for new model
can i dm you or a mod about a wooting discord server issue?
Sure
thx
I can help facilitate
Love you guys for this 
#knoblife
I didnt cerakote it myself but there is a guy who does it professionally here
He outsourced the milling on my board but he my other quant
If you check his FB here lemme find it
The milling, engraving and cerakoting was found from @theimprovguy on FB
Only hassle is shipping at it will cost roughly 179$
I almost had my board done in the us but most of them are gun guys who do cerakoting
This guy has done countless boards of all types
Im not schilling this board at all, just a recent one he sent me as my buddy is interested to cerakote his tofu or his alumaze
The knob is real 

Im buying both
#knoblife
PEAK PEAK PEAK PEAK PEAK
Knobbers
hi
estimated price?
more than 2 probably
This is just me being impatient but anyone know how close to the warehouse the white zinc alloy prebuilt 80HE is? I'm wondering if I should expect it closer to May 23rd or closer to June 3rd
Last update was May 2nd 🙂 Was just wondering if anyone had any more recent updates
I'm very excited 😄 I ordered some white ceramic keycaps from Cerkey too can't wait to see it all together
heyo guys I my new wooting keyboard and I got a question about the RBG effects, is there a way to invert the Numpad key light effect?
When’s the knob coming ?
q1 2026
Jeez
SA
Is that for real 
Yes.
Yes. In Settings.
thanks! found it idk 5 min after posting that, didnt expect that to be in the "regular settings" and not somewhere in the keyboard setting
technically that page is named "Keyboard Settings"
technically its all keyboard settings 
How do u save ur settings on ur woothing or does it auto save I’m new
Top right, yellow button that says save to keyboard
Has to be on an active profile though
guys where do i leave a review? this keyboard has to be my best investment ever.
You'll receive an email with a link some time after receiving your products 🙂
where did you get this?
I'm interested in the 80HE, I currently have a 60HE and two HE. I'm curious if Wooting does a trade in program, or if we could sell off our old keyboard here? If this isn't allowed let me know.
You cant do this here
Acknowledged, thank you.
meow
Ship arrived in LA like 5 days ago
It left today so it’s prolly going through customs or in transit to warehouse
Hey does anyone with gt80 case for wooting80he have ping issues? If so, could you provide solutions to get rid of ping. Would like to still keep a aluminum keyboard sound, without packing so much foam.
anyone know how to disable caps lock indicator on/off from showing on the screen? I cant figure out how to disable it within wootility
Try poly fill
Could also be an issue with the cable, make sure it is in the cable channel and not on the edge at the top, that can cause issues
Thank you!
hi, can the lekker spring pack be used on the lekker v2 switches?
can it be used onto other switches too like Magnetic Jade linear that is available on wooting website?
cannot be used on TTC but others should be fine
what do you think
so all the switches here should be fine to swap the lekker spring am I right to say that?
can you see the word TTC anywhere here?
I can't. but I also don't have much knowledge in this field my sir
can't really differentiate what type is what type
you dont need knowledge to read what it says in the picture
2 of these are explicitly listed as from TTC in this screenshot
if you didn't say that I actually didn't even notice the grayed small text there, my bad
but yeah anyway, TTC uses different springs that have different length and diameter so those switches wont be able to be spring swapped
all the others should be ok
ok, do you happen to have the info of when the lekker tikken switch will be on sales?
wooting hasnt given any specifics, just around release date of 60he v2, maybe a little bit earlier if production goes super well
if you want the current "best" switch according to most people, take a look at owlabs ti he
it has an rgb diffuser included
but the switch color might mess with rgb color a little if you care about stuff like that
you mean the top housing isn't transparent and that might affect the rgb lighting?
no, more that it has a coffee colored top so the reflection of the rgb on it might take on a slightly different tint
yeah
with the lekker spring?
actually the lekker spring on wooting website, is it even a magnetic hall effect springs? or it doesn't matter actually?
it is he compatible
I just checked geon pingless spring also don't have spring that exceeds 60g?
I'm looking for springs above 60 'cause I'm using ceramic keycap and 60 lekker switch springs still feel a bit inadeqauate..
lekker spring go from 35g to 100g and they're non magnetic
but they're compatible to the lekker 45 v2 switches?
yes
which he switches make use of magnetic springs?
None I hope.
Would have received an email with some potential reasons as to why that happened
Please contact customer support for assistance with this: https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
Yes yes, expecto patronum to you too.
R u dutch?
No 
O
My order got cancelled i send an email to support yessterday whats happening
Support will help explain and assist with the issue. Please be patient.
r u mansensinatrya
Real?
I have no clue what you're talking about here...
Owlab Ti's
they are indeed 'still fast n shi'
Yes, very fast n shi
lol
They are better version of raws
no
Wait
I see u have a raiden, currently i have a zero
Should i get a raiden than? The zero is too rough and slow for me
If you want fast and smooth mousepad, yeah
40 might be too light, 50
it's very good for rhythm game, well, Osu!mania type of game at least
carbon fiber plate for the clack
Every time you ask, I will personally make sure it takes another day. (Kiddding of course... unless?)
It's been HOURS, friend. Have a modicum of patience please. We're talking a couple of business days typically. Just as the automated email you've received explains 🙂
Because you are 😄
Im just excited for my wooting
and so are many others that mighve sent us a message
take it easy dude, you did what you could for now. Now you just gotta wait
how long does support take???
yo
3-5 days or so business days they said recently
who knows the option to help me with straff I want when I press a key always the key pressed more which is priority*
for the people with the zinc alloy case and the same problem what did u do?
hit up support
Contact support
They reached out to support for warranty support and replacement?
What keycaps should i get with my ghost 80he?
whichever you like :)
in #1070668460905988106 you can see that everyone just uses whatever they like/fit their vibe :)
Does anyone know if a glorious wrist rest is the good size for 80he?
the 80he wrist rest we sell :)
delicate gamer wrists
open a ticket and you will get your money back. I have the same issue on my black zinc. looks like this is starting to be a common issue
kbdfans gt80, kbdfans holy80 and aim bone80
welcome to keyboard modding
Are the stock stabs decent or should i get others
Hi guys may I know what type of switches some of y'all use planning to mod my 80he😊
Raw he
Get Owlab Ti's, they are currently top recommendation
How's the gathreon jade ?
OO okok thank you
Outdated and very expensive
You need those Ti's 
Ooo Oki thank you
And what after that? Those are not sold here 😦
Where
Czechia, I see some shop in Sweden apparently sells them 🤔 Delta Key CO
yes, deltakey is legit
Yeah they give the money back for the Zinc case right? but iam thinking to ship the whole keyboard back actually do they accept it?
i have it for 4 weeks now
Ok I will order this, they are half the price than jade pro, just bought the wooting but without switches, thanks
yeah I got my money back for the zinc case, I didn't have to send it back
yeah but u have to coat ur zink case
because with time all will fell off
iam pretty sure
how long u have the keyboard now?
6 months
didn't you email them? They give you a few choices normally for what you want to do in the reply
normally one option is full replacement, another option is refund etc - just depends on your case and what you pick
i'm confused at why you'd want to be shipping whole keyboard back?
it'd just be the case they want shipped back normally
could buy the other one without the zinc case
why not just take the refund option and buy a new case then? Isn't that way easier
i could take 110 euro back and would pay for the normal case then again? makes no sense
so iam buying the normal one for + 300 euro? but if i would buy a new one it would cost me only 200+ something?
well no, if you wanted a new zinc case you'd just opt for replacement option (which btw your problem isn't widespread on every batch - it was specific batches that were impacted they said)
i meant you could buy a case from another vendor such as kdbfans if you were worried about wootings case
like a gt80
oh i see
yeah thats actually an great idea to take the 110 euro back and just put 10 euro on above and buy the kbdfans anodized pine green
yeah that's a simple way to fix the issue for you since you don't want another wooting case it seems
thanks for the help!
When it says that my keyboard is expected to arrive around mid-June, does "arrive" mean to my house or is that referring to when the nearest postal office/place receives the package and will deliver it?
Where are you looking?
The wooting hub thingy
To your address.
Thx
whatever you gave up as a delivery address I assume?
off-topic but how do you make your name colour wave? Is that discord nitro or some of those buyable skins?
its a role color
its a new feature that servers can enable with the boosts
Oh, that is nice, thanks!
i would want my wooting to talk back to me. PC gaming lonely 
all i hear is deep CLACK CLACK CLACK
Why would they make this
is it a good idea to always hand lube switches?
bought the wooting x ttc kom poms, recommended to lube them before hand or?
Depends on the Switch, some Switches are fine factory Lubed. Some People always just Hand Lube any Switch they get. But i heard that People with TTC Pom Switches always say they Hand Lubed them
I am kinda sad, that the white wirst rest does not match up 100% the color of the white zinc 
But as far as I have used it, I really like it. Idrk why people say, that it slips around. Can't agree at all! It doesn't even move a bit in any direction 😂
Yes lube them, they are dry
@sour saddle I think i like the color of the wrist rest overall alittle better, but i agree i love this thing
I wouldn't even notice it, if it wouldn't be so much brighter than the keyboard
Wrong channel for this
Is there a possibilty to buy white key caps in the website? I only see black? Need a full white one 80 series?µ
is that for the 80'?
oh damn no azerty? 😦
iso french is coming soon for pbt keycaps
Thanks then i probally wait it out
Would be the best idea
Thanks guys y'all the best
which part of the switch do i actually lube, just the rails of the bottom housing and the stem? only the contact points?
Just watch a tutorial on youtube
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
This is my ultimate guide on how I lube my switches effectively. I wanted to focus more on the dos and don'ts of lubing switches to avoid mistakes and give you all my opinion on some ways to avoid over lubed switches. This guide is meant for cherry MX style switches and focuses on linear variant. Again, the amount lube you use it totally up to y...
That one is also good
POMs? Lube bottom housing, stem walls and this cylinder around the magnet
Do not lube this spot.
Lube around it
Is it necessary/recommended to lube the switches?
Depends on switches, some of them are dry
It is recommended to lube TTC switches
Others have decent factory lube
And the "standard" Lekker switches? 😅
They are alright, I dont think you need to hand lube them
84 ANSI
85 ISO
87 JIS
thank you
anyone have the same problem that their order got cancelled
Contact support
for the ttc x wooting kom poms, is the see through plastic bit meant to be the bottom or top of the switch ?
top
thank you
Except for the ISO enter key, there it's rotatet
Like I think 90° to the left
It can go either way but if you love the RGB north is the suggestion
1 question guys🥰I just ordered 80HE without keycaps (don’t have that much money), and I was wondering if i can just put some of my old key caps in it? Or so i have to order new ones on the website. Thanks in advance❤️
Depends on whether it's the same exact layout.
Okay thanks
@buoyant solstice so if it’s not the exact same I need to buy new ones right?
Guys the elusive Hasn’t made it to the warehouse yet
no advantages facing the bottom?
Nope.
What’s the difference from the switches that come with the keyboard and the other ones that u can buy too?
When do you guys expect to have the white v2s in the warehouse
to take out these stabilisers do i need to unscrew the board?
feel and sound
Okay nice thanks. So it isn’t necessary. I guess I’ll buy it when I can
Thanks for all the help guys❤️nice community
The website will tell you if we know.
If I purchase only the Wooting 80HE module, it also has the 4 year warranty, right? Because the website says 4 years for any keyboard, I just want to confirm if the module alone also counts as a "keyboard".
Yes. But do include the case, or you'll have four years of warranty but no way to run your keyboard.
(It has the daughterboard)
Thanks for the clarification! I was planning to buy module + plastic case and then get the switches and keycaps somewhere else. So everything should be alright.
are people buying without case often enough that you have to run through this every time someone talks about buying the 80he module? it's very explicit and manual to remove the case
Hm
I can not even not select the case when buying the module 🤔
You remove case in the cart

I didn't even think about it lmao xD
Its a great deal, for like 10$ you get good usbc cable, daughterboard and a case
btw I ordered the switches in deltakey as you recommended and they created the label in like 5 minutes and shipped them an hour later lol, probably will get them tomorrow or friday.
the spacebar has a pretty hollow sound, is there a way to reduce that?
I like to put quake putty in mine if its sounding a bit hollow. Costs like $5 for enough to do 50 spacebars
is it a very noticeable difference?
and wont it weigh it down quite a bit too
Hard to say. It is to me
I just put a small amount on each side of the switch area. I dont load it up
ahh okay, thanks for the suggestion!
Is the wooting wrist rest worth it?
It’s been my favorite wrist wrest. Comfortable enough, doesn’t need to be cleaned often, easy to clean, and you’ll probably only need to replace it if you want a different color or size
Unless you want an artisan wrist wrest, which is an entirely different can of worms. I think the wooting wrist wrest is a strong contender for perfection IMO
Spacebar foam is a thing that exists. It’s like the foam they put inside keyboards (basic closed cell foam) with cutouts for the switches. Some will have adhesive and others are just held in with the fit.
Been years since I used it. But it worked well enough. Could probably do a similar thing with some foam tape or packing foam and an exacto knife
Tf
My order got cancelled
Without a reason
Guys pls help
How long do support take to answer on my email
fr that cable is so nice
esp the convertor
i would buy like a bulk pack of the convertor if wooting sold it
What convertor? You mean the USB-C to USB-A dongle?
Is there no way to buy a spare silicon pad? I asked support but they said they have limited, are there 3rd party ones?

26 weeks owning 80he
SAME BRO
What was your order?
Halp. I am expecting delivery of some owlab ti hes...I would only want to open the board once coz I is lazy... should I go for :
Knight Stabs V3 ( only regular pole is in stock)
or
TX AP rev 3 screw in (long pole)
or
Stock (just tune / lube)
now we wait 

Hey man, you want my order number or just my order stuff
I got an wooting 80 ghost with geon raw he and ofc the module
Ohhh okay. I was just wanting to see what you ordered cause I was scared if we ordered the same thing, maybe mine would get canceled too
Because you keep changing it back to those weird, italicized letters. Use regular letters and it'll be fine. 🙂
Nah i left once
Bc someone timed me out
3rd day, still no reaction on my support 💔 got refunded tho so W
Yo sexy guys
Lekker tikken or owlab ti
(Bro if your dutch and you read these switch names bro i swear 😂)
Well no wonder some people eat lekker switches
Because they are tasty


when you guys bought your 80he how long did it take to deliver
damn
I just got my 80 He and I feel kind of lost. IS there by any chance a couple of profiles one for typing and one for gaming. AS for the how long. Around a week
thanks
the first time was cancelled due to "fradulant activity" . I used another card and it went fine
You can set multiple profiles
Are there some custom profiles I can import by any chance?
You have to buy their keyboard on right time
Jammer
Till when will sale end
On the 80he
And how long does support take bc i have waited 3 days
Try to check it with VPN
not working as well
Guys😭 my keyboard is supposed to arrive at late June. I had to send my apex pro back to Amazon, because one led broke. I have to play on a old office keyboard for more than a month 😭😭
I'd like to get in touch with someone about the order I just put in for my first Wooting, anyone able to help?
edszp[
Do i look like wooting employee to you?
Change your location on the page to the US? Not sure why you want to know, if you're NOT from the US to begin with.
sorry man, i thought we were cool
I could tell you but i'am just lazy
i want to know how many $ the price was increased
Raised?
Are you EU or US ?
canada
alright I was just wondering if EU orders were getting sent out yet ty
price increased i meant to say
What increase?
nvm found it
$1.77 increase only
i was just bored
i have to logout my google account from the browser and use vpn afterwards
sorry
I still have no goddamned clue what price raise you're referring to, bud.
forget it
let's move on
life's too short to talk about our past, let's talk about the future of wooting new switches tikken
idk if we're talking about the same thing but in my country where we use CZK, the price of every item slightly changes every day. sometimes by 10czk (0.5€) or sometimes not at all.
That's because the prices are set in Euros, and the prices displayed are currency converted.
Currencies change values every day.
This isn't us, it's just... economy.
yeah I know, but Im just trying to explain as to what he maybe meant
Maybe let them explain it, if they feel the need to. 
I mean he lost it and said life is too short to explain 
Wooting 80HE arrived (and built) after some fighting with customs and my local delivery service (they wanted to charge me additional 60% of the amount I paid), but I think it was worth it, typing is awesome but gaming is crazy for this, here's how I built it 
so I don't think you're getting any answers from him
Never tried. Just kept repeating "price changes" 
maybe hes schizophrenic, you know it's not his fault
gotta love this wooting tag ❤️
Not very active on here, but my wooting 80he has been fantastic and I am incredibly glad I bought it. If anyone is on the edge of purchasing one they should. ❤️

Are there any other aftermarket cases for the wooting 80he then the gt-80?
Bone80 and then a couple of upcoming ones.
ok
any well built keycap recommendations? don't want it getting in the way of the rgb too much either
just looking for brands/sites ^
my 80he was great for the first 24 hours and now no longer functions at all, RIP T_T
Contact support
They'll sort it
<@&1098943457654997093> Can someone link this guy to the support for emails or whatever the correct route is
I have a ticket open, just waiting
Oh yeah just use them linsk from the community support post you typed in
Okay
Just venting lol
xD It'll get sorted, not the only one who has had issues but they all get resolved
Check JST cable inside the keyboard
It might be unplugged
Don't have a screwdriver that fits to open it up rn
Maybe they should include tiny screwdrivers in the accessories bag lol
I bought a keyboard cleaning kit a while back that had brushes, screw drivers ect with it
Very handy too have
Is wooting coming to Uruguay?
That is mainly dependent on two things.
-
Couriers offering sensible shipping options and pricing.
-
Local resellers making purchases to sell locally.
Just saw this on wootings yt page. Any info on when this might release?
https://wooting.io/knobs
Expected Q1 2026
will they come in white?
Just paint it white yourself 
damn. them being hot swappable & backwards compatible might've just sealed the deal on my buying the 80HE. because knob was the only thing missing being the optimal keyboard for me
I’m now part of the team 😁

Yes
I was thinking about asking the same but it seems normal 😛
Have you also got the ghost case?
i got the ghost case initially
I think it's more noticable on the ghost case because its reclecting the LED light, but I generally dont notice it any longer
yeah the flex isnt great but its not that bad really
i upgraded to a metal case eventually but i dont think that is needed
especially since the ghost case does look amazing
frost best
Do yourself a favor and buy something with faders or knobs if a knob on a keyboard is that big of a buying factor
At that point your yearning for a device and keep filling the void with multimedia controls on a keyboard
JST connector reseated, we're back in action 🤓
midi cc functionality for wooting knob pls
thats hot
3rd day - still no reaction on support 💔
il just want a smal knob on my 80
ion like that big one
Oh Nice ! When did you get yours ?
Last month
alright chat
I order an 80he
After it got cancelled once
Idk why but i send an support email and i have waited 3 days
A lot of people were busy at computex so replies mightve been a bit slower than usual. Also note that its weekend now so no replies until monday 
Maybe it was something more complex? I sent one this morning regarding my order and got a reply a couple of hours later.
but meh i ordered it again today
i just want to know the reason
does anyone have a siege profile for wooting 80he?
how much will a small knob cost ?
p
Hey there, got a question about usage on ps4/ps5, I saw that the wooting 80he is compatible with any console, but is that just menuing and stuff or also actual gaming
Any game that supports keyboards. Provided you have access to a PC to set up the keyboard to work on console. (or make any other changes to the board)
Hmm, so probably no fighting games, I unfortunately dont really have a way to test it
Is there perhaps a site or something similar where I could check for compatible games?
Shrug
Not a console gamer.
Yeahh same, it's just that the locals or tournaments are mostly run on consoles to make it easier, I personally just play it on my PC and don't have any console which means I dont have a way to test it
are fully minimalist setups considered generic nowadays
cause that would be my top pick for a style but i've seen it done kinda... everywhere
Awww yeaaahhhhh
I think so you cant but try putting rgb on that key to black
random question if i were to get my wooting keyboard signed on the back, what type of marker would I use for it
I have the plastic case btw
Uhh, permanent? Assuming you want it to stay on the board
when are the tikkens coming out again?
thinking if I should wait for them or just get the owlab ti hes
closer to 60he v2 launch they said, maybe a bit before that, but we don't know when that is
So like near the end of the year? hhhh yeah think I'll get the owlabs
they're fairly cheap anyway so not a huge deal to get tikkens later too
Hello everyone! Can anyone give me recommendation for backlit keycaps for the 80he
any1 has recommended stablizers for 80he?
I am on the same boat....same as you I'll be getting the owlabs and prolly the tikkens later..btw.. what stabilizers are you gonna use? 😄
stock ones are decent may need to be lubed - otherwise for the easiest experience I'd recommend Knight stabs either v2 or v3
can I run the stock / standard sized pole knight v3 on a switch like the owlabs?? assuming I have a decent keycap set(IE: JTKs)..
long poles, alternatively you could get something like Geon stem spacers and use the regular ones
Thanks man! Reason why I insist on running normal sized poles is so I could swap to the Tikkens later :3
well if you got the stem spacers that would make that pretty easy
Typeplus x YIKB screw-in stabilizer
Haven’t looked into stabilizers yet. I’ll probably just check if there’s any good ones I could order along with the switches from the same store and if not I’ll use stock ones for now and think about it later.
Are the owlab stabilizers decent?
Thanks guys! I am lazy so I wanna do it right and do everything when I open up the keyboard.
From what I read online yes. But preferably get tx ap / knight stabs
Ah, well I’ll look into it when I actually order
nice, mine is on the way!!
Knight v3 really good stabilizer
haven't heard good things about them from diamondlobby, please lemme know if you're able to take them out without damaging them!
Yeah, I was able to remove them without damaging them, but I wouldn't recommend them either. I got them for about $1 per switch from someone who was selling them because his keyboard had issues with the strong magnets Venom80HE. the only pros for me is sound, less wobble and feel when typing.
Does the white zinc alloy case still have problems with the paint?
nah new ones are improved version
They have quite some videos showing the improved durability
basically them smashing the case and the paint was holding on perfectly
what where, I gotta see that :D
Hello guys
I'm newbie in keyboard knwoledges
i want to buy the 80 HE in AZERTY, with PBT.
Wooting don't sell PBT for azerty right ?
And if i have to buy the KEYCAPS, have u an advice for me to choose the good ones ?
youtube?
It's coming later this year. ABS only for now.
Okay, have u a date ?
Talking about keycaps, Wooting does not have ABS Spanish layout on White right?
or maybe I checked and it was not in stock...
Nope.
Thank you, have u an advice for the keycaps ?
I can take all PBT keycaps, they works with the 80HE ?
Ans jade switch are the best for gaming right ?
are the jade switch lubed ?
yep, as long as they have an mx stem you should be good to go
pretty much all switches come pre-lubed, there's not much difference in terms of gaming performance of the switches they all perform around the same. Difference is in sound and feel of each switch
have sound tests up on YouTube if you want to see which one you prefer https://youtu.be/xk40zeBtDPw?t=301
After months of gathering... We finally have enough stock to last on our store.
Geon RAW HE https://wooting.io/product/geon-raw-he-switch
TTC x Wooting KOM RGB https://wooting.io/product/ttc-kom-rgb-switch
TTC x Wooting KOM POM https://wooting.io/product/ttc-kom-pom-switch
Wooting spring pack https://wooting.io/product/lekker-spring-packs
✨ ...
when i buy the 80 HE in module, i have the usb cable ?
i don't have to take the cable set ?
yup everything that comes with the pre-assembled 80HE comes with the module aside from keycaps and switches
its with the case, if u got the case ur good
What is upp chat
they do have a clear diffuser for RGB but personally my faves on the store are these and they are also cheaper 
out of those I'd pick the owlab but they aren't sold on the Wooting store - difference is minimal though
guys, i bought like 1 month ago my 80he, and now i see a knob is comming, will it work with my keyboard?
Yes
nice
Is it normal that the keyboard gets pretty warm? Especially the middle gets pretty warm :/
Yes, its from LEDs
Oh alright
My 80he just arrived baaaaaby
I wish here they delivered on Saturdays 😢
i had to go and pick it up myself because i forgot to put my apartment unit on the address 😭
Oh, here you never put the apartment unit, I don’t even know the number lmao. They usually ring by your name at the door.
Or just call you, that is actually more common.
I hope to get my wooting next week ✨
finally caved and ordered my second keyboard. Still new but I’m excited and learning 🙂↕️
That’s weird. LEDs traditionally are not supposed to give off heat. The power supply is in the middle of the keyboard though isn’t it? It’s likely that moreso than any lighting
any electronic that consumes electricity produces heat
wooting boards draw a lot of power for a keyboard
due to led brightness and HE sensor
What are you on about.
a external knob or on the board??
neither good or bad, just slight delay
Will these be 1 colour or will there be different versions?
guessing black and white
Im in the same situation
Is it possible for this to be earlier
Like that it can go to an earlier date
Bc i live in the netherlands and warehouse is in the netherlands ig
seems pretty quick ngl
Hello. I have the Wooting 80HE and have install Gateron Jade Pro. Problem is Despite a reset, the board still detects a 4.0mm trigger travel, even though the Jade Pro has a 3.5mm travel. Is there any other way to teach the 80 HE?
It works anyway
In future they are adding switch selector
is it better to just buy the 80he or buy its parts?
I bought a 80he Wooting keyboard with Zinc Alloy Case, and i found some paint from the case have fallen off, is it possible to get a replacement?
Yes, contact support
You mean buy module instead of prebuild?
yes
third party switches?
Yes
i dont really understand so i think ill just buy the prebuild
There are better third party switches with less stem wobble, cleaner sound
that would be nice.
L60 v2 are nice
Why do you need 3.5mm tho?
wooting 80he just arrived

nice setup
will there be any special keycaps coming for the 80HE, tired of the stock ones
does the wooting 80 he have wireless function?
No
yeah wooting
hey guys not sure if this is the right spot to ask but is there a way to delete inactive profiles?
Wootility > My Profiles
Maybe you can try clearing cache on your browser
everytime I open the browers driver thingy it recreates all my inactive profiles
Then copy your main profile and restore keyboard
it will be fastest way
just save these ones?
“Im not a techtokker bro”
Chat
Will rgb shine thru the geon raw
yes
Cam using the Geon Raw HEs in his 80HE #🔧│keyboard_modding message
u need to buy fbb ae86 keycaps
Oh tysm
I was worried
I still dont know what keycaps i want to get!
Im getting the purple coiled cable
Rn im just staying with some pudding keycaps
I have the ghost case, does anybody maybe have some good keycap recommendations with some purple accents
Stick with puddings if you go clear keycaps the rgb is super blinding ...
Fair point. That's on me. Haha
felt a bump when using the keyboard, went to clean it up and the paint flaked off...
(i already sent a warranty ticket)
Tuff
looks like you might have been among that early batch that had the coating issue
looking clean, is that the pulsar grip tape stuff?
ty
yes
how do you like it? my new mouse thats arriving tomorrow comes with it in the box
well, it add more grip, and i like it so
Just bought my 80he! can't wait to have it in hand, this is a huge improvement to my 5 year old masterkeys lite l
good that you sent one in
I hope mine will not suffer the same fate. I just bought it a month ago. How long is the warranty coverage for this kind of issue?
seems to be the standard 2 year warranty up to 4 years for some manufacter's warranty issues
which is lovely because legally they are only required to do 2
i mean we are more than confident in our products and the very few people having issues due to whatever reason we will gladly help withing their warranty time and try to hlep them as much as possible outside of it
also i saw some things about wooting knobs floating around?
yes we announced knobs and shown them at computex. backwards compatible with all arm devices we have and placeable freely on the board
obviously means you give up a key or 4 depending on the knob size
The knobs click though Tony
They're essentially special switches.
I was promised an all-knob build
Or am I wrong? Is it just the big boy that clicks?
yes but it wont be the same as a switch





