#🌟│wooting80he
1 messages · Page 327 of 1
i have same
Does anyone have a bone80 case and if so would you say it is worth it?
You know, not everyone is being paid $3 per hour. Sometimes they're given a living wage in their area. In this case, Netherlands
anyone know what i’m doing wrong or how to fix this?
push harder on left and right sides of keycap? sometimes they do that for me bc theyre not fit right
Are the stabs screwed into the pcb
I disassebled this like a week ago and I've forgotten how this works, I may have lost the screws
Yes.
well that's not good
I vaguely remember holding it upside down and the screws falling out
were they any specific screws or are they ones I could go buy more of
Screws go in from below
yes but i don't think i have them anymore
Wristrest? Wristrest
Hey guys quick question did they change how you order the module because I’m unable to unadd a case, however when I bought my first module a few weeks ago I didn’t need to buy a case?
you can only remove the case in the cart
this is so most people wont be stranded with an unusable module as you strictly need a case as it contains the usb cable and daughterboard
hi all, having some issues with my 1 week old wooting80he, anyone had the same issue where the type C is "loose"? board will disconnect or start flicker just by moving the keyboard closer to me
check daughterboard cable
could have come loose in shipping
this still doesnt explain the high cost + considering theyre selling so mamy keyboards, they could have lowered their prices for sure
they're not aiming to compete on price and they've said that many times. They'd rather re-invest or provide other things than try compete with full chinese manus who can cut more corners than wooting wants to. If you're looking for min/max cost type deal then wooting isn't for you and that's okay
what the frick
i just realized
the usb port is on the left
and its tkl (kinda)
were they drunk designing this keyboard?
he's in full troll mode, moving on time
I prefer it over standard tkl, from somebody that owned 3 previous tkl board and 1 other HE tkl
isit normal that the port wiggles?
yeah there is some wiggle, but more important is that that port is connected well via the daugherboard
if daughterboard cable is loose then it can cause the issue you're talking about
aight will take it apart and give it a check
just dont reply to him, hes rage baiting
hello I have a question , the gateron jade pro from gateron are good on the 80he ? they have the same options etc or likker switches haves exclusives options ?
both my 60he and 80he usb ports wiggle up and down, it's probably normal
mine also wiggle a bit
might be qc issue
if you're going to give actual false help then that's a fast track way to a ban. Stop that nonsense
they're solid switches, although most would recommend the owlabs ti he over them these days
i ask this bc i saw that likker switches have exclusives options on wootility like analog movement but idk if it is ture
nah you can use tons of other switches too as long as it's compatible
ty very much
so with gateron jade pro , I could fix the travel time at 0.1mm ?
yeah
but again, for same price the owlabs ti he switches are what most here would say are just better versions of that jade pro switch
I have already ordered i didn't know 😦 , but ty very much
Don’t worry too much about it. Jade pro switch is still good so you’ll be good
Most likely won’t arrive by next week right? 🥲
I think my estimate was 21-2x of march and I got it on the 19th. of course it all depends on the courier but it can arrive sooner
is 8k polling rate on a keyboard the same hit to my cpu as my 8k mouse?
A zinc case 80HE and Raed HE switches makes for a quite nice combo as it turns out. 
Sound test!!
I was planning to do one once the YIKB stabs show up, but I can do one now now that I got the spacebar to shut up.
The mouse has to send a lot of information for movement.
The keyboard only needs to send the input you press.
If you could only move your mouse 1 pixel every .5ms the impact would be as low as the keyboard.
There we go. Put the phone on the wrist rest but this is generally a lot quieter in person.
Oh. Sorry, this recording will live in your left ear, lmao
I guess I'll have to rework the stabs. You'd think it'd be as mushy as the silent MX switches but that's not really the case. Soft bottom-out, sure, but not mushy. I like it.
Hi anyone can help with macro in game ? I record keys but when I Press button for start makro its not response
Does it work in Notepad?
Yes
Then the game's blocking software based macros.
I have razer keyboard and its work
Yes - And Razer uses hardware macros, saved onto the keyboard.
Today I pickup my he80 and its not :/
Correct. We do not provide extensive hardware macros. And clearly whatever game you're playing doesn't want you to use macros in the first place.
So you either don't use them, or use them and risk getting banned I suppose.
If I know it only before :/ I will try find solution becouse this game say there is no problem with that
That doesn't line up with them blocking macro software though?
What are you using to make the macro? Wootomation? Autohotkey? And what does the macro do exactly.
Hello All,
I wanted to give an update regarding this issue since we have been recently receiving inquiries about it.
Our CS team does not generally take disciplinary measures against players that use Keyboard and Mouse software to automate gameplay functions that can already be automated in-game. Instead, our team prioritizes taking action against use of automation of recorded mouse clicks and auto-clicking of game window confirmation screens that cannot be automated through regular gameplay. Players that use unauthorized, third-party software with NCSOFT games do so at their own risk.
We hope this helps clarify your concerns about using keyboard and mouse software.
i was actually fine, i had everything already, i was just a bit confused
got the keyboard rebuilt though
it sounds really good, i'm happy with it
They block the software through their anticheat, that's different from them banning you for using it.
What they mean is, we will not ban you for using this (if you manage to use it anyways)
Heyo guys I am looking for a profile to play league, mostly Riven. I am trying to figure out in what extend I can use either Rappy Snappy or Snappy Tappy (SOCD) for advanced combos like S cancel
Is someone aware of anything about it ?
who stole your WIN key 😂
also mental disorder and real keyboard are almost exactly the same
the real mental disorder is this
thats my estimated time to
Search in #🌈│wootabase_profiles
There is nothing
🤷
seems right
can I do the same thing to the ws?
you can, but you don't need to
ok I saved it. Am I hacking now?
nah
with how many other cheap HE board out there, you're at an equal ground
unless you play CSGO or OSU, just don't use that there
Have they released a switch yet that is specifically geared towards the Thocky side of things?
no
Is wooting 80HE white zinc alloy no longer available for purchase?
oh yikes, its raw aluminium?
raw zinc alloy
Our software only works with our keyboards
forgot it was zinc even though i asked for zinc alloy pics specifically
do you guys know if these are high quality?
ive only found like 2 sources for aftermarket cases that fit the 80he, this and some alieexpress ones for $160+
There are only two aftermarket cases atm. GT80 and the Bone80
anything you can tell me about the quality on both of those?
Nothing. I don't work for either company 
presented by, GT-80
Gt80 is very nice
why is the bone80 so much more
I have gt80 i can recommend it very much
🫡 mb wrong channel
I just got and unboxed the GT80
badged?
well it was my decision after all
just so happened that today my class ended early
wasnt on the list for some 4hr class :V
i wish my DROP cases fit the 80HE
btw if u remove the badge after buying the badge version there will be a hole
i wanted to get the e-coating white
Another opportunity to link my post
hole 🤤 😻 😵💫
If you scroll down a little you can see some better pictures that the ones i took to start the thread
why did my 80he flicker like it was like breathing off and on really fast idk
now it didnt type wth
can someone please help?
especially a USB port with a dedicated power rail, so it doesn't share power with another connected device
most USB 3.0 ports or higher have their own per port rail iirc
yo so i currently use red switches because of the soft actuation and how little i have to press, is the lekker 45 similar?
Anyone know the delivery time in the Netherlands?
L60
L45 is slightly softer.
gotcha i would probably go the softer route so l45
doesent make sence though you dont need to press the switch fully down and he switches allow you to set the acutation point as high as 0.1 mm
as example i hafe 70g springs and still can softly activate since i put them super sensitive
so even the strongest switch cann hafe a super fast actuation and doesent need to be pressed at all morre force gives you more controll though
is it normal that when wootility app is on my fans go brrr
no
lol whats happening with my wootility
Do you have any apps that control your fans?
gigabyte controll center
Do your fans go brr when it turns on, and then slow down in windows?
use fancontroll that software is anyway way better 😉 specialy for mixed temperature for cases etc
Hey guys, I recently ordered wooting 80he 4 days ago everyday the estimated delivery date keeps increasing.
I ordered them to usa apparently they will come from NL. My friend is supposed to get from USA to India and he will come on may first week as of now it shows it will deliver by 19th-25th april but it keeps increasing and it hasn’t even shipped yet so I really concerned.
Does anyone have any knowledge regarding this any good news, bad news?
https://hub.wooting.io/my/account
What is the status on the hub?
Access and edit your orders, connect your discord, and manage your Wooting account.
It is on ready to pack since a very long time
But the estimated delivery keeps getting shifted
It's Monday. If you ordered it four days ago, it has been waiting to be packed for... a day.
Please have a bit of patience. It should pack today or in the next couple of days. 🙂
Ok 🥹
hahahaha this is sooo typical the very long time turning out to be one day honestly i realy dont get why ppl not hafe a natural sence for normal delivery times..
if you need a efficent small software fancontroll realy does it VERY VERY WELL
Nah man its just coz i have kind of like a deadline plus i India we only have 1 off day which sundays. I forgot that Netherlands have normal working culture 😀
we should all live in island ^^they hafe 4 day weak ... same payment - i want that!
I just like the feel of soft switches I’m currently on a low profile keyboard
prefrences cant be argued with thats just simply how you like it^^
just modded to the gt80, sounds pretty good
first time using a metal case and it sounds better than plastic
I switched to geon raws
ill prob get dampening foam
one on the left is with ABS plastic with lekker v2 right is with GT-80 geon raws both with tape mod
Nobody wants to work on weekends but everyone expects their things to be handle/delivered on weekends...
Ive gone through both of those configs already myself 
but does polyfill or dampening foam sound better?
Im considering dampening foam to decrease the sound
Most enthusiasts will say poly fill
I mean tbh there‘s no pain in trying, poly fill is like 5 bucks for an amount that you will never run out of if all you use it for is keyboards
Did u also still use that one foam included in the 80he? dk what it exactly is
Nah
I can link you some sound tests i did (keep in mind that mic changes how stuff sounds, so only use it as a reference to how things relate to each other)
https://discord.com/channels/167181566978555904/1342211699234832485 some sound tests here and some older ones here: #🔧│keyboard_modding message
The one in keyboard modding is also replying to 2 more tests
eh idk if i wanna go with either
As i said, poly fill is cheap and easy mod that can help reduce resonance without adding the typical "foam" sound that many people dislike
And it‘s so cheap and easy i dont see a reason not to try it
so ill just get poly cotton
the stuff used for pillows
Ye
Polyester cotton/filling material
For pillows or plushies or whatever
Make sure its 100% poly
Keyboard needs very little
100? 200?
I‘d tell you how much i bought but i am on the train rn
I‘ll check when i get home
I dont think you‘ll even use 100g
I got a bag about the size of a pillow and for modding keyboards that's a lifetime supply. Cost <$10 with tax.
Yup
Hey, new HE80 owner here. Made a little fu when I ordered the magnetic wave key caps when I didn’t realize it’s for the HE60.
Anyone know of similar styled keycap sets or some good fillers for the F keys? Do the ducky white blanks match color wise for example?
I bought 50g and havent even gone through a noticeable part of it
Im gonna stick with the 60he+
u guys know what's the best stabilizer for 80 he?
SW knight v2/v3 are good
Doesnt matter if you get v2 or v3 they are basically equivalent
The ones already on the keyboard are also pretty okay no?
Yeah they‘re fine but if you want something better and easy to tune then getting after market stabs is something you can do
stock
but I check the price for SW knight
the shipping fee is just.... same as stabilizer it self
have u guys tried Gateron INK V2?
you can probably find sw knight closer to where you live
with cheaper shipping
https://www.alexotos.com/keyboard-vendor-list/ check this list for what vendors are in your region and check with those
i like it, its really cool
but question, is it supposed to be like glass shattering or a spider web?
Is it right to understand that if you play CS:GO, SOCD (counter strafing) and rappy snappy (whichever key is pressed down the furthest will register) are both banned? so the only benefit is rapid trigger.
It kicks you out. But rt is allow
yes
when are we getting 0.08mm rapid trigger
pease developers I am osu player me need to abuse keyboard harder
:]
yes correct
heard 0.0x mm is unstable or smth
on other manufacturer’s kbs
wooting is more accurate than other kbs
dev told me theyre accurate down to 0.08mm and it used to be accurate down to 0.15mm. the firmware updates make it better and more stable. heard they can get it to about 0.05mm accuracy
0.1mm is hella light already tho
why cant things get better? and have more customizability?
I always hear these mindsets. theyre so bad
Iirc, the dev aim for stability, which is what you need more in rhythm game than speed
from my experience on 0.1mm it already moves the instant i even touch it down slightly
im not gunna waste my breath
ok buddy
I knew that kinda reply was coming too. LOL
dude why are you so insistent on shit staying the same
when it can get better and they can just add a potential instability warning
people like you literally make no sense man
Im not saying wooting shldnt push further but as I’ve tried other keyboards with 0.01mm they were hella inconsistent
literal RNG sometimes good sometimes shit
yes, but the wooting is an exception, and im asking for a stable low rapid trigger, not a shit unstable one. just because you saw terrible shit in the past doesnt mean all of it is shit
I dont doubt that wooting can do a stable 1 but prob not rn
I asked for 0.08mm when the keyboard has 0.08mm stability. And that was like 3 months ago. I did not ask for 0.01mm when the keyboard has 0.1mm stability like these other keyboards
Im not a person to like small incremental increases from 0.1mm to 0.08mm
Its like upgrading from a 5700x to a 5800x, yes its faster but not that much at all
I dont mind gradual improvements but I prefer one big jump to unlock a new experience like to 0.05mm
its literally free and it would be stable
I dont know why youre being a contrarian at all
other than "I dont like small changes" like what kinda reply is that
Because ur the type pushing for the max possible, im the type aiming for noticeable increases.
and when im playing a rhythm game where keyboard matters more than like any other game, whos to say I wont notice
and feel a difference
im top 4k in that game. the chances of me noticing are low but not impossible man
and even if I dont really notice but it does make a positive gameplay impact then why are these negatives at all
i already said if you want 0.08 to push the current go ahead and express urself
youre just being a contrarian for funsies its literally illogical to be a contrarian to this lol
?????
I just have an issue with this. this is like a conservative mindset for a keyboard when things can get minorly better for free. and they could just add a warning if it has potential stability problems anyway
and you kept arguing for it for some reason which is just silly. I dont even really care about you saying it might be bad. I just think its stupid to be a contrarian to potential improvements to something especially when its free and a warning can be added if it really is an issue
Go ahead but I wanna know whats ur source for the 0.08mm being ready?
Me speaking to a dev in this server like 3 months ago. ill find it lol
ill be waiting
@buoyant solstice I think it was you where you said how accurate the lekker v2 switches were with the latest wooting 80he firmware. Can you confirm or deny, is it accurate down to 0.08mm? Is it actually even more accurate than that? Or is it less accurate?
hes offline so it might take 6 years for an answer but im like 80% sure im correct
can't you just screenshot the conversation or send the link to here?
^
With the Wooting Detachable Cable Set, it can support 100% brightness of Tachyon mode with the 60HE. Will wooting release an 80HE version of the cable or a future firmware update? Thanks in advance!
@quartz saddle i dont mean to contradict you but really I wont believe unless I see the exact conversation or some1 to back it up.
and, saying ur 80% sure doesnt change my mind of wanting to see it.
I couldnt find it
In my defense it was a while ago
Mansen was the one I discussed it with
ill be waiting for the proof
does anyone know if you can ask wooting to add the keycaps to the keyboard for you cause i ordered a uk keyboard layout and it comes seperately
Did u buy module and keycaps on the side?
If so I believe the keycaps come with the other layouts
If anyt just contact wooting support
if it isnt US layout it comes seperate
i dont wanna mess smthn up when i put the keycaps on cuz i always buy keyboards premade
Replacing keycaps are easy.
im js saying but am i able to ask them to set it up for me or nah
Nope, prebuilts are already well, built
does anyone know what time on the 15th the white zinc wooting is going on sale
Can someone from wooting support message me? I need help regarding shipping.
This is not the space email support/make a ticket
you can ask a general question, otherwise you need to send us a message through here https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
Already did 🙂 thanks for the guide though
No 
did they replace it ? it happened with my second case as well
yes, just fit it now, need to pack up the old case and send it back
Anyone tried the jade max switches on their w80he?
Jade maxes have friction issues, dont buy them
get owlab ti he instead
why does some keys sound a bit different than the others?
Because size or location
Any other options with slightly more rgb (not very keen but I do have decent keycaps)
UR studios' Ice Ultras:
https://a.aliexpress.com/_olxsrh9
can someone send me a link to lekker 45 and 60 switch comparison or smt?
they are same, just different spring weight
oh, i want my keyboard to sound more thock
Not really doable to have "thocky" HE keyboard, because most switches are clacky.
Poly fill, plastic case, heavy keycaps (pbt or cerakeys or something)
#🌟│wooting80he message check out the soundtests i put here to see how some mods can affect sound (namely, poly fill and tapemod)
is there a reasonable design philosophy to not put a knob on 75% keyboard?
melgeek made84 pro
chilkey slice75
sikakeyb hm80
wooting 80he
.....why no knob???
its not 75%☝️ 🤓
sure but I want to talk about why no knob
yet
👀 
Nyet
75% keyboard is like mental illness you dont want to have it
i love that emote
ISO and JIS prebuilts for white zinc are now available for purchase, as well as separate cases
ANSI-US prebuilts not yet
why are you a beetle
It's springtime 🙂
When is the white zinc v2 going on sale?
already has, except for ansi prebuilts
just ordered mine im so hyped
congrats man 
when would these go on sale
i swear in the youtube video they said the 15th as well
well considering that ansi prebuilts are getting sent out on the 22nd I would guess not until may at the very least
is this just the us or canada as well?
shouldve been here couple days ago when mark fucked up and released the prebuilts early lol
i tried ordering that day, but it kept canceling my order 😭
I do
mind sharing?
I do 😛
nah bro messed up bad 😭
A gentleman does not kiss and tell
guess
mansen can u reply to this
it's already 2
or anyone really lol
I mean I did many times before and it was a non issue?
I know he doesnt but it was a long convo lol
Xvx channels
thats cuz hes kind
yeah, and why is that a problem then
if he wanted youd be kicked after the second time
only you are making it out to be a problem seriously lmao
yes, anyone with power can spaz out and do whatever they want. but hes not like that
well if you do it then one other person does it, and then suddenly more and more people are doing it
its like a chain effect
most people would follow the rules and be scared to ping. I prefer being formal instead of practically begging people to look at it and trying again and again
literally wastes more time and eats more chatroom
bro pinging is literally begging

seems like the point is proven in both of our sides
it doesnt seem to be an issue because he is kind and also just likes discussing stuff
when you search it like that it shows even when his name is mentioned
¯_(ツ)_/¯
shhh I was meming
You have the wrong person. And please don't ping staff.
I remember semi extended conversations with you, I really wonder who it was then if it wasnt you
im emotionally dumb mb
I don't think Mansen would be able to specifically confirm or deny that, would be a question more for the firmware devs
doesnt matter bro, him helping doesnt mean anything
I genuinely just thought he was. That must have been the lekker v3 switch discussion then
Definitely wasn't me. I don't work on Wootility, and have zero idea about such precise values.
if your friend gives you a ride home you wont use him as a personal uber now will you
bro it doesnt matter who it was
just put a question out there and if someone answers good for you.
I can't buy the ANSI wooting 80he with white zinc alloy case. But I can buy ANSI PCBA and white zinc alloy case. why is that?
the module and case are a diff SKU
Because they are two different products. One is a prebuilt keyboard, the other is a case and a module PCB.
I genuinely have been trying to ignore it but just let the mods get angry/warn me/ban me if its an issue 😭 I got warned it is what it is man
ill stop cluttering this chat and screw off tho
But can't they be put together?
you dont have to screw off, just be respectful
Sure. If you want to.
well thats the whole point
They won't be preassembled for you though. It's a DIY project using our guides.
also lets keep in mind that modules are on back order + not everyone wants to build their keyboard.
putting 84 switches in the module incident
I know. I have already bought the wooting 80he and the Frost case once.
I just want to buy a new white zinc alloy case. Then gave mine to my brother.
🤣
I have a question. PCBA is out of stock now. But the white zinc alloy case is in stock.
If I buy now. Will it wait until all arrive at the warehouse before shipping?
yes you will have to wait till everything is at wootings warehouse
I wonder why wooting doesnt ship more modules if they sell out all the time
Probably because it is easier to produce the case.
In the future, could I possibly buy the wooting 80he with a white zinc alloy case? I want the white keycaps.
maybe true for the PCR ones but idk about zinc. Its still not an electronic device, but it's still a hassle to make one
😢
module is actually cheaper lol
but if you waited for the prebuilt it wouldve cost like 290
Demand for the module increased relative to prebuilts, whereas production plans are locked in 6-9 months ahead of time
isnt it better to make 20% more than you expect and just have it in the warehouse?
even if the demand was less months ago
Will the keycaps come prelubed if i order them separately?
why would you lube keycaps... If you're talking about the switches, yes they will come prelubed so will the stabs
Um yes so sorry i meant switches
thats 2 sets of keycps tho
wait I don't think they apply lube to switches
they do
im comparing the price rn, we dont know when the zinc v2 prebuilt is gonna go on sale again
And will the stabs come with the switches?
they come preinstalled in the module
You need to purchase the following.
Module
Case
Switches (90 pack is enough)
Keycaps
And bring your own PH1 screwdriver of course to put it all together.
Is there any expected timeline for the ANSI-US pre-builts or is it subject to the unfortunate political climate?
I have two options
-
I have already ordered a prebuilt all black zinc alloy wooting 80 he, stay with that order
-
Cancel my first order, go with the module and white zinc alloy.
Now leave my preference
Leave practicality
Someone just decide for me 🥹 which option should i go for 😀
Wallet :

Keep the order.
I want the white one because my mouse is white, we are not the same
Bruh my whole set up is so weird
I got a all white pc build
Black mouse
Black keyboard
Black mouse
I do wanna add more white i think i will just purchase white keycaps separately
cooked
The thing is i am just to concerned about how dirty white can get easily sometimes
I mean I hold my mouse all day long and its fine so IDT the keeb will get any worse for wear
unless you eat cheetos, then there is no saving you
True i will start buying more white stuff, i am thinking to buy a mouse and i am pretty sure i will go with white this time
its all in the coating. A V3P with the black coating doesn't feel that good in hand, the white one? Kinda based ngl
Oh yeah, my mousepad and my desk is also black
Thanks i got myself all lian li fans and vertical mount, excited for that
ordered white zinc 🥹

Dont mind the bg noise that is not the pc that was just a really noise fan beside me
peak
give me ansi white zinc and my life is yours
Will definitely try, thinking to get a viper v2 pro
Just get a module 1 it is literally cheaper than the prebuilt
with my failing vision, I don't trust myself with the assembly. But might be worth it if the prebuilts ain't gonna ship for a while
Actually, there are sooo many videos on how to do it, it is basically fail proof
that's a nice one, but I'd recc at that price point you deffo have a look at some Lamzus
You have me intrigued now. I haven't build a keeb before, I should look into it
I think when i get closure into my purchase decision i will compare lamzus i am fingertip grip guy. I am still exploring mouses
I meant there are so many exclusively for wooting 80 he so yeah, and it does look really easy
Its best to always try some
Ayo since when does Wooting support Jades? I thought Wootility came precalibrated for Lekker travel times
Is that the Zink one?
I just got mine today
No I don’t think so
Since always?
But Wootility still isn't geared to switches with shorter actuation, and it will jump from around 3.1? to 4.0 immediately.
are somne keys meant to be lower than others
Thanks!
Discord special discount: ||Discord0% for 0% discount for the first purchase. Also with a super nice bonus. Every next purchase is +1% to price ||
are these the keycaps that come on prebuilds?
I want a discount which is exactly 1 cent and a Statistik how many ppl using it. I and a slow shipping option for that extra torture to yourself
Yes.
ty
Well finally got everything together for my 80. Nothing fancy yet. Ghost case with Pulsar Acid Rewind keycaps. Will do some better switches and touch up the lube when my money gets straightened out in a few months. Overall loving the keyboard so far.
Honestly it looks dope, congrats
We have a discount code for 0% off and it has been used hundreds of times
Wish I had that 0% discount code when I ordered 
There's always next time.
DISCORD DISCOUNT

Stop giving discount codes and call Igor! We need his super powers to package all white zincs in NL!
Anyone know if they stated that they putting more prebuilt white zinc on the shop? Or should I should build it myself
Thanks, honestly wasn't sure how everything would look but so far so good. Reminds me of the old Gameboy day's when stuff just popped. Now everything is just plain black/white and "modern". Not sure if I'm just showing my age or I'm just tired of boring and bland?
nah I can see the modern look everywhere
its just standard now
Yeah, no originality anymore. Just cut and paste unfortunately.
just bought the 80he, need high elo val settings for it plz
im rad and play on 0.1 everything for actuation and rapid trigger
what ab this
.1 is crzy tho ngl
mm some people i know in high rad use like .3 @shadow patrol
mostly talking ab the continuous
and the seperate press/release
idk if those are worth messing w
continuous rapid trigger doesnt really work when you have low actuation (less than 0.5)
u use rapid trigger on shift/control?
not shift
rapid trigger for walking is crazy
then if u need stretch ur finger to reach another key u gg
hey quick question can i remove this information stuff on the pcb
it goes over some od the screw holes and i just wnana know if its safe for me to remove
its safe
you can reuse it later
do i even need it in the thing or nah
ohh
ok good i didnt wanna removd it and then find out that removing it will make my whole house explode
Why not trying it out yourself to find your pro elo settings. Doubt there is a universal pro league setting for everything
Hey, im thinking about buying either the jade, geon raw or lekker lin45 switches. Cant really decide. What would you guysreccomend?
jades are outdated. from those three id recommend getting geon raws. Or if you consider buying switches from other sites, get Owlab Ti He
whats so good about the owlab ti he ones?
sry, im pretty new to all of this 😄
Also im looking for a page to buy good quality DS keycaps, that are not too pricy, any suggestions? thaks
they are basically improved geon raws that wooting sells, less stem wobble, fully closed bottom, great sound
Would definitely get owlab switches over anything you listed above
is there anything wooting sells, that ive not listed but thats great? I feel like 70€ is just too expensive for me, i probably wont notice the difference?
owlab switches have same price as geon raws
But if you tell me the owlab ones are great im gonna take them
both cost ~55$ 90pc, no reason to get raws over them. Raws are still good tho
Not saying they are bad
those are the right ones, right? https://unikeyboards.com/en-de/products/owlab-ti-he-magnetic-switches
The Ti He Magnetic switch is OWlab's first HE switch release. Compatibility: HE Magnetic switches are only compatible with Hall Effect PCBs, including but not limited to Wooting HE+, KBDfans HE series, Geonworks HE PCBs, Rakka, Nuphy, Melgeek, Matrix Lab HE kit, and others. The Ti HE Magnetic switches are not compatibl
If you are EU, order from here. Shipping should be better
https://deltakeyco.com/collections/new-arrivals/products/owlab-ti-he-switches
thanks, i will check that out
Can you recommend a page to find keycaps?
thank you!
what is the mixing rgb effect supposed to do, i dont see it doing anything
Dumb question, I just ordered owlab ti switches , in unikeys page says 10 pieces , I just choose 9 quantity, is right? 90 is enough for the 80HE?
Push down your arrow keys
Yes
Thx!
nice to find out abt this after i bought geon raws breh
wen was that?
1 month ago
mmm, not too bad
i just got them ytd with my gt80
you can prop wait for 3-5 more months for a more improved switch
maybe by then we can get 'thock'
theyre good dw
Please make a thread in #1019755933959733258 and include screenshots of the entire interface as well.
anyone went from a Steelseries apex pro to wooting 80he? if so how was it?
Make a thread in #1019755933959733258 and explain more about how it's plugged in, what model it is etc..
The only thing I don’t like is ISO
ISO is the superior layout
I switched into ANSI , I don’t like specially small shift on left side
I respect the opinion but for me no
looks like they put up the white zinc prebuilt the day after i was asking bout it, just purchased :)
https://www.alexotos.com/keyboard-vendor-list/
Tons of options
thx
so i accidently changed to game pad output and went into a game, now i cant tab out, how can i switch it back so my keys work again?
Fn + Enter will switch to a different profile that probably doesn't have gamepad mappings
Or the mode button
thank you!
I got the white keycaps when i ordered my keyboard a little bit ago, and today some of my keycaps are turning pink..?
That is... curious. Maybe look at your fingers? 😄
My fingers are clean as can be, i wash them nonstop everyday lol
Do you use corrosive sanitizers or other intense chemicals while doing so?
Why is your spacebar flipped
flipped spacebar better 
No, just water, soap, dry hands
its specifically the right side of my keyboard too, the one place that should probably be the most pink is not at all
That is true...
yeah around so, but i type with my pinky lifted
i mean i could imagine a scenario where someone uses their pinky to wipe around their eyes or whatever and it takes some makeup with it but idk how reasonable of an idea that is, never wore makeup myself haha
@nova nexus it says the 80he ansi 80he zinc alloy is available for sale but whenever i order it, it just cancels it
oh sorry mansen
That is not related to it being a metal case specifically. But the email explains.
my gf and brother have the same issues ordering to their locations or to mine as well
Ah yes you did mention that previously. We can't really help you with this however as previously explained.
okie i'll figure it out ty
I canceled my order and reordered. How long do I need to wait? It said 90 minutes, but I've already waited two hours.
For?
holy when was the ansi prebuilt listed
today I was literally checking everyday for 5 days
glad I did lol
ye hopefully, but considering they just added it today and not with the rest, probably not
I think so too
guys
i have the 80he
and when i press W and then A and D i stop moving#
or stop moving forwards
im not sure what to do to stop it from happening help plz
Did you grab someone's profile by any chance?
no ive barely changed anythjing#
So you did make some changes.
Hi, I have a question. I'm planning on getting a Wooting because I've seen that the reviews are pretty good for it as a gaming keyboard, which is what I’m looking to upgrade to. I just wanted to know if I should go for the Wooting 60HE or the 80HE.
I feel like that’s more personal preference
do you prefer to eat a burger or a pizza?
Do you like yellow or blue?
Triangles or circles?
Dog or cat?
its a matter of preference. If you have to think about a 60% layout, you gonna find it annoying real quick
Ya'll Jade pro's should be on sale on ali express if ya'll wanna cop some
until april 21
8k was crazy then I realized it’s a whole different currency
anyone here have tried installing typeplus stabs on wooting 80he (with factory plate / pc plate)
I have the 60HE
It’s a great keyboard more space bro
how does 80he look like when it comes to cs2 socd is banned or detected in premier matches? and the same as the situation on faceit is it legal or is there any penalty for it?
are all keycaps compatible with 80he?
rapid trigger and adjustable actuation isnt banned, thats the main thing of the keyboard
pretty much
im trying very hard to setup my wooting to lightly pressing e, it spams it, and then holding it just holds it. As you see below this is where im at now, but i can only get it to press e twice, how do i get it to rapidly press e?
Not possible without macro software.
Woah
do you want 60% or 80% thats the real question
aesthetically 80he is nicer
60he is better for form factor
i went ahead and got the 80% i think that was my best choice
nice
looks beautiful
I'm having the Command key stop working randomly on OSX with my 80HE. Unplugging and replugging seems to fix it. Haven't had this issue with other keyboards.
80he for gaming + productivity
60he for if all u do is game
I’m also having the same thing happen, have you figured it out yet? :c
i had to have a family member order it :(
damn 😭 im so confused as to why too, i sent in a supp ticket so hopefully that works for me
yeah it's really wonky
Might be a dumb question but if i got Ceramic key caps for my 80HE from cerakey, there wouldn't be any issues right?
Might want to spring swap your larger keys, cause they're going to feel very soft from the added weight.
i would have the GEONWORKS RAW 50 gram for my keys
i heard 70gram is needed for the spacebar but all the other keys would be fine
Gt80 is goated on the wooting 80he
Hi guys, is there any way to get the wooting 80he role in discord when i bought my wooting 80he on my friends account together with his?
Only way to get that is to have been part of the original kickstarter for the 80HE.
The regular "I own a Wooting" keyboard is available to anyone who has a keyboard. Just gotta move your order over to your own account.
If you choose to sell or give away your Wooting keyboard, the new owner may wish to access the Wooting Hub for support and warranty assistance. Caution: Wooting
ahh it’s a must to send all orders to new email?
can’t only 1 order / 1 pcs from 2 pcs wooting that is ordered?
that’s kinda sad, but well what can i do
Thank you @buoyant solstice
If you have two keyboards in the same order, and want to split them up, that's unfortunately not possible.
It would have to be a separate order for each board.
yeah, i did that with couple of my friends…
we didn’t split the orders..
but it won’t matter much right?
Only matters for the purpose of a cosmetic role here on Discord. 🙂
about warranty and such?
Warranty remains the same. As long as you can provide the order details from whoever placed the order.
I took the time to lube my switches, the thock is so satisfying
It took such a long time tho, but now I need to find ways to make my space bar less noisey
Make a thread over in #1019755933959733258 and take a screenshot of your profile rebind tab?
How often do you lube your switches? Just to know
Foam, if your spacebar rattles, tune it (or get new stabs but probably not needed)
I’ve got my keyboard probably about 5 months now, this was the first time I lubed them since I got it. I bought a kit that came with the lube included worked out perfectly
It doesn’t rattle per say it’s just stock, all the keys have a nice thock but the moment you press that spacebar tho it’s eeeh
My stabs had some rattle after a while but your mileage may vary
Tho if you want to change spacebar sound, try spacebar foam maybe
Could you give me a link to some you’ve used ?
Where can I get the progress of EU-Steenbok-8?
Just the spacebar foam from kbdfans
I got it when i ordered some other stuff at the same time
Im in that too, its probably too recent to have any updates
Did you also buy the white zinc alloy case too?
Can someone explain to me what happened to the Wooting 80HE arrow keys?
Got the prebuilt for it
What am I missing?
In what context?
They were there last I checked (looks down at keyboard in front)
I got a mail from Calder.
Nice
Can you show email
Order is being prepared to ship, LETS GOOOOOOO
Wait a second... Mansen you have arrow keys? Mine are gone! Thief!
Same as me but that estimated date looking nice
Are there anymore sellers apart from this one @bright jewel
Likely. This is just a link a community member has provided based on their experiences.
Mines already getting ready to ship now
Haven't received any notification yet. Are you EU-Steenbok-8 too?
Yep, I checked the hub and the status changed for me
My HUB has not changed.
I purchased 1 x Wooting 80HE
US-ANSI - Linear60 v2 - ARM - Zinc Alloy White
just waiting for it.
reminder that easter holidays are happening so tomorrow there is less/no work I assume
until tuesday
You probs next
Oh ye that’s the same as me as well
You bought it prebuilt?
what do you need 2 80s and an extra zinc 2
Another friend was instigated by us.
youre paying for all the friends
What he originally wanted to buy was a China keyboard.
We are in Taiwan. Shipping is quite expensive. So I buy it for everyone. They will give me money later.
If one person buys it, he has to pay more than $30 for shipping.
I paid 10$ for shipping
But if we buy together, each person only pays $10.
do you see me complaining
where are you from?
czechia europe
distant place
like width of germany away from netherlands
lol
Do you know Taiwan? I guess you don't know that because our country is quite small
yo if i put in different switches do i have to change anything in the software
no (:
just very smart of you guys to just order together like that
hope everyone will be happy with their 80!

You may need to help us ship 80he as soon as possible. So we can use it happily as soon as possible. 🤣
Probs cuz you have more stuff or your location
Also my shipping was only $8 :) shipping to us
Because of duty issues. Hong Kong is only a 90-minute flight away from us.
But I can only choose European warehouses which are farther away from us.
I have no power to do that

you guys make semiconductor chips I know taiwan
Everyone knows Taiwan for this reason. But we still have a lot of great food, culture, music, and people.
Also I don't want to lose my social credits so I can't confirm or deny if taiwan is a country or a part of china
For example, ASUS, GIGABYTE, and MSI are all from Taiwan.
good to know
lol I think you really understand this meme
I love the night markets in Taiwan
This is about a war that happened a hundred years ago. It's like the brothers who once were separated. A hundred years later, their descendants said to each other: You should have obeyed me.
Last time I was there, I had this burrito with peanut shavings, ice cream, and cilantro - it was incredible
you had bing chilling?
In fact, it is due to the relationship between economy and force. Taiwan really has no way to confront China. So we really need help from other countries. But this is indeed difficult. There is nothing we can do.
That might be why the delay, for my shipment at least I know they’re rushing to take advantage of the $800 exemption thing
I can accept all of this. Just want to get the keyboard as soon as possible.
Ye that’s fair, I’m just happy I was able to purchase it
I should go to bed. It's already 3am here
What switches are recommended? I remember a while back it was Jade Pros but not sure if that's still the same.
Mind explaining the difference?
I'm currently using Gateron Creamy Yellows for instance.
Dang, I should had double checked this before I just placed my order.
I wasn't aware of these options on the website.
Placed about 5 minutes ago.
then you should be good to cancel
if you wanna ofc

to get the switches you want
I'm trying to find the video that I recently watched. It had quite a bit of thock to it.
So, I wouldn't mind having something lighter for gaming.
I still don’t understand switches
Nor do I.
r ntheyu shippping to america again?
They have been until may 1st or something
While stocks last.
I just picked up ti he
Should arrive in a few days
From what I've heard people prefer them over raws
Is the feeling better or sound?
I was recommended WD Dash but idk.
Don't buy these now
They are outdated, I currently use them
Switching to ti he, which from what I've been told is quite the upgrade for stability and sound
Sound and feeling
Ti he is more stable, sound is different i think they are a tiny bit quieter than raws
The one by owlab?
Do you mind sending me a link?
what region are you?
yeah. owlab ti he
lemme find link for us site
Hey guys. I noticed my wooting80he doesn't wake up when pc does. I have to unplug/plug back in. Any idea how to remedy? Also if i should ask this somewhere else im sorry!
idk a usa link but check what shipping is with this one
https://keybay.tech/products/owlab-ti-he-magnetic-switches?variant=50812668248339
this is the site i ordered from its canadian
also unlike raws these arent a pain in the ass to take out ig
These sound pretty thocky.
geon raws are the best thing i did for my wooting lol
gateron ink pro v2 with a pre-lube service i don't wanna admit what i paid but theyre dope haha
pre lube service 
So, should I go with the OWLAB Ti HE?
yeah im new to modding. I was nervous doing it myself lol
imo yeah
they are cheaper than raws while apparently being more stable than them, and quieter if thats what you want
i wasnt too nervous when i dove into my 60he (also first time) it all seemed pretty easy compared to building pcs
i feel like you could go either way. I enjoy the thockiness of my raws and dont find them wobbly at all. Much more stable than the lekkers that came on it.
i use mine for gaming primarily
more stable = technically better
but its not a noticeable thing
on paper TI HE would be better due to the extra stability but it really doesnt make a difference
I currently use a BitMap Alpine65 with Gateron Milky Yellow.
Geon Raw are treating me very well. Zero complaints and I love the way it sounds/feels.
muh 60he
I just ordered that mouse.
love beastx
oh thats so funny
gonna order a solid side beastx max soon
Well, I ordered the mini version.
I have 5 FinalMouse Smalls
😭
im also on team beast x
beastx supremacy
ive been using my beastx mini for almost a year iirc
like 8 or 9 months i think
i was looking into finalmouse and didnt wanna pay 350+ on stock X
i would never buy a finalmouse product
i was soooooo stoked to find wlmouse im gonna buy another one lol
im gonna keep my mini for ftip, and buy beastx max for claw
Old setup, lol
the lil sticky covers were worth putting on
i dont use the grips
fellow glasspad enjoyer 💪
older pic of my setup
i got a pad from WLMouse and have zero reference with good gaming pads to know if its good or not lmao
but optioned with glass skates
i wanna order another artisan, but im waiting for a canadian retailer so im not paying absurd prices
gonna get raiden mid eventually
So, do you guys sleep your pcs?
Geon RAW He Switchs are cheaper.
i just shut mine down
Than the Ti, lol
And if so, when it wakes up does your wooting wake up too?
opposite for me
I sleep my PC
raws are more expensive
I have to replug mine in it doesnt wake up with the pc
by like 15-25$ for me
yeah if i sleep mine it does
mine stays off :/
odd
both on my old pc, and this new one thats 3 days old now lol
buy whichever you want they are both good
raws are a pain in the ass to get back out ive been told
I mean which ever is better, lol.
raws are a louder clack while ti's are slightly quieter
ti he is technically better because its more stable
Okay, I'm listening to a comparison from Wasabi on youtube of the two.
Yeah, he suggests the Owlab's.
i think im going to order a set myself after seeing this video lmao
the geon raws are very nice but those owls sound super clean in the videos
Should I go with 40g?
I'm about to order them.
I also was wondering about the stabilizers and the kbd case.
i really like my stabies I got but theres so many good options
Should I go with the 40g?
on my geons i went with 50g
your wooting should have come with a couple extra switches i think one is 40-45?
See if you like it. I like 50 it feels just right to me
I think my current switches are 35g
I know that's why I'm trying to hurry, lol
correction - 1 set left 84 40g lmao
I have no idea what my current switches are.
50g feels goot to me but that was coming from the lekker v2s that came on it
Okay, so I have Durock Creamy Yellow.
I think 40g will feel better though. And i think that sentiment is shared because less 40g was left than 50
They're gone, lol
shit, did i snipe the last one???
oof my bad G
lol, all good. I got the last one. xD
OH hahaha
i felt genuinely bad for a sec I was about to cancel and tell u be ready lmao
lol, sorry.
Thanks, any thoughts on the KBD Fants GT-80?
I got the zinc case with mine so I rock that
BUT- while I was modding I did look at this gt-80 and also the drunk deer case
i think for the 80he thats the nicest one rn
batch pre-order they wont get sent out for a while I think
have you seen the keyboardman modkits?
I have not.
sec
The most powerful modding kit for Wooting 80 HE Exclusively designed for the Wooting. Now revamped for the 80% layout. Modding Kit only, Keyboard not included. Not compatible with other keyboards. Why mod your Wooting? Sound profile: fine tune your auditory experience; whether you like clacky, marbley, or thocky. Modif
regularly sold out but, when available I highly suggest getting a full kit
i went with the POM plate I messaged the guy and asked which one was the thockiest he suggested that one.
Foam + White POM Plate?
yup
oh snap he has cases available now to??? https://torontokeyboardman.ca/products/bone-80-aluminum-case?pr_prod_strat=pinned&pr_rec_id=1adee4730&pr_rec_pid=8125707288771&pr_ref_pid=8067588423875&pr_seq=uniform
Bone 80 Aluminum Case – Elevate Your Wooting 80 Upgrade your Wooting 80 with the Bone 80 , a premium chassis designed for both aesthetics and performance. Crafted from high-quality aluminum with exceptional finishes, it delivers a flawless finish in a wide range of stunning colors. The 19.9mm front height feels even lower thanks to a recessed ...
lmao
Why this over the other one though? I thought the other was very interesting because of the ball bearing design.
other could be better! I just am seeing these other cases for the first time
Now, I'm curious. lol
they also seem to be batch pre-order
https://torontokeyboardman.ca/products/titan-nation-kaiju-no-8-keycaps-set
I'm not gonna lie. These are pretty sick, lol.
Titan Nation Kaiju NO. 8 Nuclear Power Profile PBT Material Keycaps Unleash a monstrous level of style and sophistication with the Kaiju No.8 Keycap Set—a striking blend of sleek design and thoughtful functionality. This grey and white keycap set features stylish, transparent PC accents that seamlessly complement the d
Ohhh those are nice looking
I still rock the wooting stock black ones that came on it and also bought the white set additionally from wooting when i got the keyboard and swapped out all the middle keys
and then a couple accent keys for spacebar, wasd, esc
I think this case is not good to use. I bought it before. And I gave to my friend.🤣
😢





