#🌟│wooting80he
1 messages · Page 321 of 1
Lucky you, I'm still waiting for mine and it looks like it'll be 9 months wait in total
Is there a way to measure the polling rate of the Wooting keyboard? Something like a polling rate checker for mouses?
An example
so i bought a keyboard, and im wondering if there's any way i can get a native japanese layout on it
i know there are keycaps for it 100%
but taking the keycaps off and being met with stabalizers... where would the keycaps even go?
is there some way to do this under $200?
like even just $80 is fine
or am i gonna have to buy 2 wootings
you can get the board in JIS layout if you want, but in general what the key does when pressed is determined by your OS
so I'd have to purchase a new board separately?
no
so no new PCB required, great
just configure your windows or whatever to use japanese keyboard layout
i thought the japanese layout physically had more keys
i mean a JIS layout may be best for a native japanese speaker because they may already be used to it
maybe im just wrong?
it does but doesnt really matter if you can work around it
okay
i wouldnt buy a second board if you are just learning anyway
i think this is just transitioning into I need to go to a linux server
because this question stems from me not wanting to reinforce romaji usage on my 15 year old laptop
and then getting bored and asking unrelated questions
but the thing i found online doesn't let me type the he character
so im kinda fucked.
as i said, keyboard language and all are on OS level, so you can configure it in OS however you want and if you are missing anything you can probably just throw it in a fn layer using wootility
you give me ideas, i like where this is going
as for keycaps, you can swap em out for ones that have combined legends if you want
has anyone had any problems with the keyboard randomly holding down windows key, happens with 8k and 1.6k pulling
dealing with stabilisers isnt that bad, you just gotta pull out the keycap and put new one on its pretty simple really
Japan has more than one native layout.
JIS is one. ANSI is another.
how long does it take for the wooting to arrive because DHL has been saying the same thing for 3 days
Mine was arrived to me like in 4 days
mhm okkay
Did they remove the functionality from wootility where if u hold 2 keys at the same time it alternates between the two? I just upgraded and cannot find the saetting anymore.
socd
idk
that setting never existed
no maple story cheating keyboard sorry
if i want to switch stabilizer do i need 60 or 104 set??
https://kbdfans.com/products/typeplus-x-yikb-screw-in-stabilizer?variant=42919037141131
Intro The Typeplus x YiKB stabilizer features a patented structure that sets it apart from anything else available. It includes a secured wire mechanism that minimizes the risk of wire popping out, ensuring reliable performance. Crafted with precision tooling and premium POK material, it offers superb stability, low ra
I dont understand anything lol !
post in their discord, they will help you read those graphs
is this screenshot from boardzy accurate?
I thought there was a way to use the keys with different levels of activation like there is on a controller. For example if i were playing a racing game and only wanted to steer slightly to the right i could press the key a small amount but i cant seem to figure out how to activate this feature if it does exist.
Hey guys, when I'm returning a wooting 80he, is it ok if it arrives later than 30 days after delivery
I already have the label
80he was tested with alpha firmware here
is there a new list?
Nah it was there for sure lol
Please show me then
Surely someone posted about it or something if such a thing existed
no, maybe he will retest it later
do you mean snap tap?
time to use my warranty claim
if i buy the wooting 80he rebuild i will got the l40 or l60 pls
Dym prebuild?
yea
Prebuilt came only with l60
ty
Better get module
and u uthink what is better l60 or l40
i cant afford 😂
For me l45 is better
for what ?
≈ same price as prebuild
10 dollars is 10 dollar 🤣
I prefer more lighter switches
ty for help
have you updated the firmware
this happened to me also when i hadnt downloaded anything
It’s up to date
Imma use my warranty claim on this
got a link for those caps?
is your keyboard connected directly in to the pc
I have a laptop so yes
set 1000 polling rate in keyboard settings
hey, did anyone else’s raw zinc alloy case come scratched?
What's the talk about wooting's case v2? I saw it being mentioned on the subreddit while looking for the gt-80 case
I never set it to 8k polling
funny bar showing profile mode
Funny that. Almost like it's programmed as the default behaviour 😄
I did it the hard way
Is it really worth the extra money for zinc alloy? I never had a plastic keyboard besides membrane ones
Like in terms of durability over time. Idk i might overthink this but i dont want my keyboard to break out of nowhere xd
The pcr version won’t just randomly break but if you’re worried about longetivity and you got the budget then the zinc alloy might be worth. i’ve had my 60HE for a while in the same stock plastic case and there’s not a single bit of damage to it so i wouldn’t worry about the plastic version breaking tbh
能给点80he的代码吗
Hi guys, you probably know best, how can i set my Windows on English, but my Wooting lenguage on Spanish?
What'd you order?
Bro what
I'm one of the ones who opted for the Zinc White v2 pre-builds
Are you not in US?
Australia :)
how to choose dvorak keycap
Not sure if this is the right channel. Looking into upgrading from the 60HE+ to the 80HE. On the website it lists the Zinc Alloy - White as an option but it isn't showing as an option to actually order it. Not sure if they just haven't added it to fulfill pre-orders first
There were production issues with the White Zinc in particular, and so they've halted the ability to order them and gave the customers who did put their initial orders through the choice of keeping the "v1", or waiting for a refreshed "v2" with modified changes to solve the issues.
As a result of this, I would imagine they'd need to get through the initial backlog of these White Zinc orders before allowing more people to place orders through, but I could be wrong
How Long does IT Take that the wooting arrives to Germany ?
Yeah, I watched their YT video on it from a few weeks ago. Figured it was just because they wanted to fulfill those others first, but I figured there would of been a Pre-Order option too for afterwards
Got a question : im looking to buy the gt 80 and theres a choice to buy a daughterboard or not or can i just use the daughterboard from the ghost pcr case from the wooting 80he i already have
Yeah you can reuse the daughterboard from the ghost case
That option is just for people that did not get a case with their module
it's the same daughter board
Correct. 🙂
Well no. It's one they make specifically, not us. Should have identical functionality though.
as in set the language keyboard to spanish or the application/website language to spanish ?
Thanks to you & @polar mulch for helping me decide which switches to take for my 80HE!
I got it last week and been testing it out as much as I can in my free time and the L45 V2 feel amazing in the metal case.
Gone are the days of needing a lot of force (for a keyboard) to press the keys and here are the days of lightning fast key activation with no force needed whatsoever to activate the keys and the feeling to have zero latency delays.
To give a little spoiler about how I am feeling with the 80HE:
- The 8000Hz with the 0.1mm key activation on the Wooting is just out of this f'ing world* vs the 8000Hz & 1.6mm key activation on the Corsair.
- The Wooting feels instant while the Corsair now feels... laggy. LOL.
Thanks for this amazing product Wooting-Team!
I hope more people will catch onto this and think about buying one of your products. I will do my part by recommending them.
Well deserved!

Is there no wooting 60 HE community here?
A channel? No. We only have a specific channel for our newest products, since there tends to be a LOT of questions. You can use #💬│general or #🔧│keyboard_modding for other boards. 🙂
I don't understand
I'm not buying. I've already bought Wooting 60 HE. What I want to ask is whether there is an AC channel of wooting 60 HE.
@buoyant solstice
AC channel?
yes
I have absolutely no idea what that is 😄
Now this channel is the same.
?
Discussion community
if ur using google to translate id recommend deepl
Like I explained already there is not a 60HE channel like we have #🌟│wooting80he
Use General or Modding channel as needed.
You just became a founder, congrats! 🥳 But you might be left wondering how does one claim the actual Discord roles? Follow along
Join our Discord: https://wooting.io/discord
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social...
Joo
Does Wooting have online customer service?
I ordered my wooting with ISO Spanish keycaps layout buy i had a bit of trouble setting it only the keyboard on Spanish, but leaving Windows and every application on English, might sounds kinda odd but i got used to it haha
https://wooting.io/support
We're an online only company. 🙂
Pick the category and issue you need help with, and we'll guide you through the process.
Has anyone ordered the NCASE KB - W80HE? I can’t find any videos about it.
I wonder why...
Oh I see. Thought it was out longer
It doesn't exist yet. Or ever depending on how much interest there is.
It looks amazing but I hope they add feet to if for different angles
Good afternoon, is there any estimate of when the white v2 zinc alloy case will be available to order? I keep checking everyday but no luck.
My 80HE Module + parts were listed for end of april / early may, this afternoon I suddenly got an email that I need to confirm my information and my order is listed for fulfillment after doing so. Did I just get really lucky or?
Means they got stock of your missing part early or released some reserve stock - but either way that’s a good thing for you
Whoa that's super nice then. It's gonna be my first custom, really excited.
The modules was originally planned to go via sea freight but we did air freight instead
what’s coming first? frost case or raw zinc?
Avocado case
peak has came
Hey, how do you get the keys to act like a trigger or a stick on a controller? Like when playing a racing game or something. i thought this keyboard had functions like that
It does.
Some of my wooting 80he keys wobble more than others, is it normal? The wobble really annoys me
I tried changing the switch with the spare one included but it didn't work
stock switches are wobbly
Isn't lekker v2 less wobbly tho
less wobbly than v1
Also its only some of the keys
but wobbly
So, no need to worry?
no, if it really annoys you, consider getting other switches
Also it affects actuation by 0.02mm when i wiggle the keys to front and back while being pressed
4.00mm to 3.98mm
thats fine
Oh okay thanks then
What switches should i change to if i want to fix the wobbles? Also is mixing different switches possible?
Yes, its possible to use different switches at the same time
TTC POM switches have least amount of wobble, wooting sells them
but they need to be hand lubed, because theyre completely dry
Geon Raws are another option, they have better wobble than lekkers but worse than ttc poms
good factory lube tho
Is gateron jade okay?
Raws better
Its the only switches thats available in my country
jades are outdated and probably have same wobble as lekker v2
Jade gaming, jade pro, jade max?
Jade Pro is good, jade maxes have friction issues, jade gaming is most stable out of those three but the sound is not for everyone
Thanks
how do i activate it?
You can use the add new profile and it has pre created profile there, or you could add it manually in gamepad options
Also how do i get ihaswooting roles?
You just became a founder, congrats! 🥳 But you might be left wondering how does one claim the actual Discord roles? Follow along
Join our Discord: https://wooting.io/discord
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social...
I bought the keyboards from third party seller, can i still claim it?
Did seller transfer ownership to you?
No
Then no
Can i ask the seller to transfer ownership?
If you choose to sell or give away your Wooting keyboard, the new owner may wish to access the Wooting Hub for support and warranty assistance. Caution: Wooting
Thanks
just ordered an 80HE. as I have seen, there are some profiles for different games in the software page. where can I find some and where I can download the software? thanks
I got TTC POMS on my 80HE thats coming soon, what should i expect
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: https://www.wooting.io/support
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE https://wooting.io/wooting-80he
60HE https://wooting.io/wooting-60he
Two...
In terms of feel, how are they compared to wooting 60he the one from 2022
ah, idk this sorry, im new in wooting community and products tho xD tried to help
Nono its appreciated Bro
is it really a big difference between plastic pcr and zinc alloy? i have seen an youtube video and i can't hear the difference
almost no stem wobble
anyway what is a ghost case everyone is talking about?
https://wooting.io/product/wooting-80he-pcr-abs-case?Color=Ghost
If only we had a website or something 😄
didn't know, sorry
I've recently changed Jades to those and I can confirm that 
yooo zeebars went from late april to 10th of march
Guys will the ansi modules last til next week or do they sellout super quick?
Only time will tell.
oh damn do we know how long the last batch lasted?
I wonder how fast will the white zinc sell out
just half will be gone with the pre orders lol
my raw zinc alloy case came scratched, does anyone have experience with that?
Scratched?
Any Pics?
looks like this
have you tried turning it off and on again
yeah i even replaced the blinker fluid
I keep hitting my enter key too hard and popping the keycap off
How is this a consistent issue for me lol
how...
I would love to know, but I've done this 3 times since I got my keyboard a couple weeks back
Each time I've had to unplug my keyboard to re-initialise it, otherwise it registers the enter key as pressed down
ansi or iso?
that is... strange
ISO, UK
do you perhaps hit the right side and the left side lifts up?
not sure, I think I hit it pretty central, but could be wrong
okay but which side lifts up, or the whole keycap goes flying?
whole keycap
yes i also had multiple scratches like that on mine contacted customer service about a weak ago still waiting for an answer tho
the 80he module "expected at warehouse" date changed from early april to march 9th on the website. does this mean shorter wait times if i purchase it now?
Hey
one of my keys is permanently pressed down about .2 mm or so, is there a way to see which one it is? this is a brand new wooting 80he ive only used for like 2 days
found out its my prnt scr key, is there a way to fix this
Is it the switch or sensor? You can try to unplug and plug you keyboard again to recalibrate the position.
just got the 80he myself, comes with a keycap+switch puller and some spare switches
comes with a bomb
didn't need my legs tbh
but definitely worth pulling out the switch and popping it back in
Yea, I asked the same earlier today. #🌟│wooting80he message This was the answer
oh wow thats awesome! did you get any news after confirming your order?
I don't know if it's required for Wooting boards, as mine has yet to arrive. But you might try to recalibrate the board as Hall Effect boards can get wonky with magnetism depending on environment your board is in
If calibration is a thing in Wootility
Definitely! I confirmed the info they asked for and it jumped from late april - early may to within 1 week lol. Order status also got updated twice.
lolol sounds good!! in that case i'll place my order asap :) thanks!!
is there anyone in the eu with a spare black 80he case by any chance lol
dawg im hyperfixating on the fact that i got pcr ghost instead of black so bad rn
any aftermarket aluminum cases out yet?
theres 2, 1 from kbdfans
The other i forgot
ah the classic unplug and plug back in worked great haha
failed step 1 of troubleshooting thank you
ITS FINALLY HERE
SAMEEEEEEEEEEEEEEEEEEEEEE
only problem is i forgot to get a keycap remover
ohhhhhh
didn’t even notice tbh
and btw the software should recognize the layout of the wooting and from what i saw it didnt
where do i download the wooting software
go to them website
or just go to the https://wootility.io/
~instead of installing
sweet appreciate it
is the downloaded software better than the website version?
anyone have any experience using switch pads on the pcb
have my gt-80 coming friday and just built a yunzii al68 with silent switches. I like the effect, however i wonder if it will mess with the hall effect switches
Me still waiting 
after finally using my fingers to remove the keycaps i looked into the travel case to find a fricking keycap puller
Yes. FR4 Plate and GMK keycaps 
Idk what any of these is
i just got an email from UPS saying "Your delivery is arriving tomorrow" which would be wednesday, then i check the email and it says scheduled delivery thursday, wtf is true now lol
I think the tracking link is the most up to date, but it might be different for UPS, no clue tbh 
Yo, guys how can i use 8k polling rate ?
Its enabled by default
if you got an 80he
You can make sure that its enabled in wootility > keyboard settings
For 8k scanning, you enable Tachyon mode - but lose RGB animations.
Is this because of the board getting too hot if it still hold RGB animations and 100% bightness?
Good afternoon, is there any update on the white zinc alloy v2 case on when it is available to purchase?
No. It needs all bandwidth available to push the latency down to a minimum.
Righty
That poor gigadevice mcu lmao.
Sometimes I wonder how other manufacturers can push higher bandwidths, like 32k scanning
My guess is just a more powerful mcu like an STM32F723 that has much more I/O and clock speeds.
H series is nore powerful.
But F series no doubt has more than enough performance
Although an F723 is probably way overpowered for this application lmao.
H series is crazy
Those can power and control entire systems like industrial machines
Yup. If you DMA everything with error handling you might be able to run everything on one single board.
Yup
The power draw definitely massive.
I wonder if people have issues with wooting 80 he keyboard sucking too much power
Oh for sure, that M7 core needs lots of power to keep up its 550MHz clock speed.
It's already pushing it with the bright RGB and the fact that you need constant power running through each Hall sensor.
True. I cannot imagine the routing for each RGB alongside the hall sensor for each switch
I bet all the motherboard USB issues stem from Wooting's keyboard eating all the 5V power
Then other devices drop out
And complex routing to avoid emf, but compensatable with auto calibration
I mean 850mA of current should be doable for most motherboards. Although I could be wrong.
Oh true lmao
Those emf simulations must be crazy helpful tho.
Some manufacturers may be sharing USB ports with single power rail.
Yeah that makes sense, more compact and saves costs
The 24pin may not sport a lot of 5V rails also. So actually wooting should provide separate power source.
Like provide additional USB to connect to power adaptors
If that were the case, we'd see this problem -everywhere-
Our keyboards are by no means the only high powered device out there. Plenty of those around, and plenty of folks absolutely stacking their USB ports full of power hungry devices 😄
Well I for one definitely maxed out my USB port for my previous motherboard.
Sometimes the USB for my DAC drop out, sometimes my wireless mouse disconnect.
Solution is to spread the load.
Yes.
But one can never have enough USB ports.
Unless they buy premium motherboard
I wonder if one fine day I can see each of the USB port being PD and DP port together
Oh yeah since you are here, I cannot find information regarding the contents for 80he module with the case.
Do they contain all the foam like the full version?
Yes. Gods almighty, yes. I genuinly don't understand why people ask this every day, or why they think it wouldn't be the case 😄
I suggest adding package content section for the modules also.
Kept me wondering if I should source my own foam or gaskets.
It's shown in the exploded view, it's mentioned in every video.
Sometimes my wooting 80he randomly disconnects then reconnects and after that i cant type anything and for example when i press w or something else it does a random action instead of typing the letter, someone pls help
its like my alt or something else becomes toggled and i dont know which one it is or how to turn it back off
Which cable do you use? From the box?
yes
Seems like a power/voltage issue tbh.
Try to connect keyboard to other ports, or check USB settings in BIOS
ok i will try that ty
I'll add, I once had almost exact same problem (random disconnects and reconnects) with a mouse from glorious, as it turned out they supplied mice with a weak cable, so this problem was solved by replacing the cable itself.
But in general, yes, it sounds like the keyboard lacks power. You can dig around on the Internet and find similar problems. And could be power settings in Windows also.
i will be getting a new pc in about 3-4 days so i dont think ill have any more problems with the power, it might just be my current pc being 6yrs old and something not working right. If the problem persists i might just buy a new cable
If the problem continues, it will cross a lot of problems off the list. Hope it will work fine with your new pc!
hope so too my man
If you have usb hub with additional power, can test it
unfortunatly i dont
but the problem still persists, its mainly when i press tab, caps lock or alt
how many days does it take to deliver to germany at max if any1 knows?
Access and edit your orders, connect your discord, and manage your Wooting account.
Still got Zinc Alloy White V2 on my mind… pls.. I need it…
do we know when the alloy white v2 will be up for sale?
i know they said this week but do we have a day or anything, thank you
think Mark will share some more news on that soonTM
can anyone tell me how to fix this error message?
Uninstall SignalRGB
Try another usb port

Thanks it worked!
bruh
can the coilde cabel be use in the 80 he????
Of course
Does anyone know if there is a way to configure the KB to activate the profile based on the PC it is connected to?
You can save up to 4 profiles on your kb
No.
And 2?(idk) save in wootility and they will also work but only when you are running wootility in the background
guys plz help, I put the batteries in my wooting but I think they deactivated, the fish wont go back into his bowl after I took him for a walk
what do I do
So sure? I also didn't find a way though.. I'll see if I can find a place to propose a feature
You're looking for #1141096226884956181
i was about to create a ticket on gh, will see if feedback will do
On... on github?
Doubt our dev team looks there of all places. Wootility isn't there to begin with 😄
Same as gd 2.2 release
After gta 6
Oh we waiting already
I just got my wooting and plugged it in, how to fix nothing typing?
contacted them two days ago, guess it's a waiting game now
just wanted to give a bit feedback about the replacement.
i had issues with my stabs of the spacebar wooting reacted fast sendet a new one --> Works
thats the good part -BAD PART the stab was unlubed and i only happen to hafe some lube by accident . and putting the stab in is for some ppl surely not easy so i would say thats a big no go-
if you deliver a faulty stab ADD LUBE
the great part.. new stab holds the spacebar and i hafe 0 issues now
old stab was somehow to small and literly slidet out of the keycaps
we need to pin this
I had a problem with a single LED, sent out a mail to the support last week on Monday and I just received a response today and a Replacement is already on its way to me. Super good support. I know the wait time to get an initial response might be long but once you receive it the support is very quick, helpful and super friendly
men what keycaps? <3
holaa, alguien que sea de mexico que me pueda recomendar donde comprar keycaps? jsjs
I swapped my switches not too long ago and now my pause switch rapidly activates simply from the weight of the keycap but even without the keycap it still activates
replug
the keyboard?
Something something biblioteca.
Yes, replug the keyboard
and let it calibrate for like 3 seconds
Make a new profile then
Hi everyone - I'm looking at a Wooting 80HE and new to the keyboard scene. I've tried to do some digging on the website, and also take a look at the web software demo but figured I'd just ask here.
So the Wooting 80HE is my preferred layout but has one problem- I'd prefer HOME and END keys instead of Pg Up and Pg Down.
Is it possible to remap these keys - and can I actually remap keys to what I want in the software?
Would it also make sense for me to build the keyboard instead of the prebuilt version if this is something I would do?
Hope this makes sense - thanks all for any input and feedback 🙂
Reason being is I need to use both keys for work, and I would prefer to have direct keys instead of having to remember the Fn key hotkey equivalent 🙂
You can remap any key to any key you want :)
For my 60% I have the r shift key, right win, right alt, etc set to my arrow keys for example
Is that done in the Wooting software, and does that save to the keyboard itself (ie: will it persist through formats, other devices, etc?)
ALSO-
Does an 80HE include the remaining key caps for a full sized keyboard map, i.e.: home, etc?
Trying to figure out if that would make sense for me to "build" instead of buy the prebuilt if it doesnt come with what i need and id have to buy that anyways - open to feedback there
Yes Yes
Okay! awesome, glad to hear it - I was trying to find a good unboxing video and setup to see someone showcase what all came with it but couldn't find anything in my simple searches - didnt dig too hard though!
Has anyone found decent gray keycaps that are shine through?
guys, is the software better to download it or use it on website?
I just use the website
super excited my GT-80 just shipped!!!
does the wooting80he come with any included USB cable?
It does
couldn't find it anywhere, except that you can choose to add a coiled cable (bloody expensive btw) during checkout 🙂
Unless you buy the module and remove the case? Yes. 
This is all information that is provided on the 80HE product page, exactly where one would expect to find it. 
Personal preference.
im so happy that wooting shipped the package to my courier and now i am waiting the package 😄
yes
almos 2 months with 80he and its gorgeous
I had gone to the FAQ. Didn't expect a small FAQ on the bottom of the product page 😄
anyway, ordered! A friend is already a very happy PUBG player using the wooting80, so he got me convinced (and excited) to buy one too. Not that it'll improve my gaming stats though :p

A bad player with a good keyboard still results in a bad player.
Oops I said I was gonna fix this like 2 weeks ago and then went on vacation

i just got my keyboard whjat do i want the sens at
is there a way to set a custom polling rate between the 1600 and 8000
i think there might be in the software but will it be added to the web software
There is not.
1600?
Only options are 1000 and 8000
80HE polls at 1600 normally.
oh!
As displayed in the main Wootility page.
thats the scan rate
is it hard to implement custom polling will it ever be added
but anyway that's also not a thing in the desktop ver 🤔
Polling, Scanrate, potato tomato 
I don't believe so.
resisting the urge to be a reddit andy and ask "what is your use case"
Wouldn't that be a Reddit Randy?
i think it would be cool if it was added
As far as I recall it would still pull the full bandwidth of 8k if set to 2 or 4k, so it wouldn't positively affect games that have issues with 8k
ahok
the polling rate switch is mainly there to switch between usb full-speed and usb hi-speed since some machines have trouble with the hi-speed that 8k uses rather than the fact that it's polling 8k
Maybe we could make that more explicit in Wootility?
Scanning:
USB Full-Speed (1k polling)
USB Hi-Speed (8k polling)
Then the user would be better informed on what the difference is and why they would choose one or the other. Bonus being to imply directly that there's no reason to have a middle option because "USB Fuller-speed" isn't a thing
Time to ask the USB consortium about this very niche use case
the naming itself is already confusing (full speed is slower than hi-speed??) let alone explaining this to clueless users
the current description of "change this if you experience stability issues" suffices imo
People know 1k, 2k, 4k, 8k because that's the kind of terminology other brands use (however accurate or not 😄 )
The USB consortium is a mess with naming
Nothing makes sense with them
usb consortium try to give things good names challenge impossible
it is accurate just that 2 and 4k make no sense on keyboards when 8k is available
I was mostly throwing shade at companies claiming 16 or 32k with no further details and limitations 😄
or 128k
360k keyboard with predictive typing, it types before you actually do it! AI based for gaming!
Imagine frame generation but for keyboard input!!
Please don’t.
32k polling is a ton of data, because it's 32k times however many keys of data.
Wouldn't be surprised if it's 32k for only one grouping of keys near the wasd area and the rest is like 1k.
i think they only claim the absurd numbers for scan rate
Scan rate is quite low level yeah, so you can dial up the data rate a bit, but how often you can send that to the computer is limited by your usb controller.
keyboards over here trying to be the first ones to break the laws of physics apparently
Luckily that hasn't happened yet...
Ngl, most usb controllers built into ARM MCUs are, kinda ass lmao.
would suck if my keyboard magically turns into a black hole
yo i have a question would the pcb itself be the issue if a specific key keeps stuffing up even if you swap out the switch
because my up arrow keeps double clicking and letting go of the input too early and it doesnt happen with any other key
Ready to Pack, be fast pls
Technically they are not ours to command. Our fulfilment partners are all their own companies. 🙂

thanks i love them too 🙂 https://oblotzky.industries/products/gmk-cyl-oblivion-v3-1?variant=40150087106728
Also it's a keyboard, not life saving medicine. Taking a little longer than Amazon to get an order fulfilled to ensure warehouse employees are treated respectfully is perfectly acceptable
its a "toy" for "kids" (even if grownup kids) so you will hafe ppl who behave like spoiled brats 😛
every time i see someone here crying i think the same ...
I was just making fun
chill out everyone.
oh damn you guys make zinc raw too but not available, would have fit better with my magnesium mouse.
Hmm? Raw Zinc is available. Might not be in STOCK however.
haven’t been here in a while but have the issues with 8k polling been fixed or is it still kinda iffy ?
i mostly use it in 1600k polling thats more than good enugh for me and all functions are still running
Anyone know of a handy at-home trick to remove the hollowness of the spacebar press? I tape modded (3x layer) the board, but that spacebar sound is still rough...
got the perfect solution for you
Is there going to be a plastic white version of the 80he or only the zinc?
2 sided tabe does let light true and makes the spacebar sound awsome
it needs to be rubbery else it does not swallow sound
No plans 🙂
adhesiv acrylic gel - dampens realy realy good
Sweet I'll be to sure to check it out! I am absolutely in love with the 80HE w/ GEON Raw switches, and the 3x tape mod adds a nice touch. I just couldn't get over that hollow spacebar x.x
sound goes even deeper if you use pbt instead of abs but im just inlove with that abs keycapset so there need to be compromises :^^
I got these poron pads that are pre cut
im a little bit annoyed with the deforming wristrest ; the gap in the middle of the keyboard. any way to make it "flush" again like heat or so?
Aha understandable, I've just got the white double shot Wooting set for now. But I'm keeping my eyes open for future keycaps, when I feel like spending money on a keyboard again,
That looks pretty neat, how is the effect on the sound?
basically does the same thing reaper's soln does
Oh cool, then I'll just check what is easier to get my hands on
although consider shinetrue it looks stupid if you use 100% RGB and all ekys shine a bit but the spacebar is "blind"
i mean even solid keycaps shine a bit depending at color and co even the 1.7mm thickness ones
Yea I was debating if maybe layering some more painters tape to the inside of the spacebar could also do the trick, even if that would dampen it a little less.
Since it worked so well for the bottom of the pcb
It's like typing on a cloud.
Those Raws are so sweet to type with, can confirm as of today
After years if office boards and then Logitech / Razer, I thought "just how much difference can it make" well...
are there any discounts I can use?
Now I just need to take some time at some point to properly set everything up in Wootility for gaming, normal use etc
DISCORD DISCOUNT for 0% off your order
that's mad
Wooting doesn't really do discount codes as far as I'm aware. They do give occasional discounts on products on their site though. And if you become a customer I believe they can get your personalised deals
ok thanks guys 
I got discount on my order, but that was just site-wide iirc
We do "discounts" when certain products are bundled together, and occasionally we offer discounts on accessories for return customers
My case was cheaper and the keycap set too etc, but maybe that just because of my order being non-prebuilt
any Edging today? 
Correct, a chunk of the margin normally associated to the keycaps, case, or switches, gets wrapped into the module product instead
Competitors can beat our accessory pricing without breaking a sweat, but they can't match our secret sauce: keyboard hardware (and firmware)
Frog edging

and even with that they can't compare
Yea, that's why I also chose the 80HE in the end. It seems most reviewers and influencers when they review boards all "forget" or leave out the fact that you don't just pay for hardware, also the software
Ater years of Synapse and all those, seeing something like Wootility is just chef's kiss
i hated synapse it was so obnoxious to use
i genuinely thought that there was never gonna be a good software for peripherals
Got used to it as I've used it since I was 14/15, but as I got older and became a bigger enthusiast for PC and PC-related stuff the annoyance for stuff like Synapse just grew more and more
$220+ for a Huntsman Elite, or a few bucks more and you get not just a better keyboard overall, but also access to Wootility. I mean come on
honestly the recent nuphy are pretty close its for me like going the the OG
+50% for this kind of question
That would be DISCORD INCREASE (if it was real)
(please shopify, let it be real)
Is you guy's keyboards also wobbly and not balanced? I can't see a difference between the rubber stands
You can see the differance in the image
Contact support for warranty based assistance
https://support.wooting.io
Pick the category and issue you need help with, and we'll guide you through the process.
My Wooting 80HE arriving tomorrow! Hell yeah 
Hi guys, received my wooting 80he and assembled it. My keys seem to be kind of uneven and if I try to even them out, switches nearby may jump out. Is that normal?
I'm new to modding
sounds and works perfectly though
so maybe best to post an image
Not sure if that can be seen on an image but one second
i imagine its visible if you say uneven
my keys are white so it's hard to see. Maybe I didn't apply ehough force?
I sticked the switches until the click like in a video on the channel.
It's very slightly uneven on some keys
didn't push hard because I'm afraid to damage the built-in tape mod
you cant really damage the tape mod by pushing keycaps on or switches in
Did you use only 1 type of switch?
yeah l60
ok after I asked I had an idea and now I know
It's the keycap lol
keycap is a bit lower in height. Sorry for dumb question
you can contact our support about it https://support.wooting.io
Pick the category and issue you need help with, and we'll guide you through the process.
Aight
it's one set but the semicolon keycap is somewhy lower than all other ones
maybe manufacturing defect, all others are fine
I can live with that, I bought it a while ago, so no return
check semicolon and the keycap next to it. take them off and look at the bottom
theres a row height embossed into each keycap
with enxt to it i mean left/right
no, it is very sick. you must seek medical attention asap
@lament saffron, MTNU Darling came in and it's very nice on the raw case. The nice bento deskmat pairing was a fun surprise too.
That mat looks familiar 😄 , that combo looks great!
bit of a late reply by me - but I appreciate it! I'm pretty settled into getting an 80HE at this point now in the near future - thanks so much for the quick confirmations!
Bro i wanted to change something in the order and its ready to pack
i hope the support i contacted can make it in time 
crap

link to where you got em
Too late.
If you can't hold an order, neither can we.
The hub states as much, as does the automated response you get when reaching out to us 🙂
Not sure if they'll have more extras after the initial pre-order fulfills, but I got them from Novelkeys.
https://novelkeys.com/products/gmk-mtnu-darling-keycaps
Oblotzky has them in stock for EU folks:
https://oblotzky.industries/products/gmk-mtnu-darling
And his page also has links for other proxies as needed.
I don't know if any vendors on Ali have tried making MTNU. I assume since it's a fairly new profile, it'll be harder to come by outside of GMK's vendors for a good while.
ah i thought its some designer of some v2 or such
Sorta. This round also included an r2 of the original CYL profile caps too. Same vendors.
I am new to modding, is like every keycaps compatible or do you guys have some special pages to mod he80?
"MX" or "MX-mount" keycaps should work. They'll have stems on the bottom that look like this:
im guessing ill have to go to the support website but on my he the left shift randomly started sticking had to remove the switch anytime i put a new switch in just keeps sticking
man i am so interested in the mntu profile and all that but i just cant stand the damn legends they went with 😭
maybe i'll have to get blanks or something
how do they feel tho, does the profile feel good?
Personally, I'm a fan of the legends, but I'm also one of the psychos who like SA so 
Profile feels so good. It's my favorite by a good margin. Still prefer GMK CYL or DCS for sound, but MTNU is very close there.
Them thangs are hideous
anyone off the top of their head remeber the code for white rgb on wootiliy
Have you checked that you fully pressed down the keycap into both the switch and the stabilisers? Be sure to press down with decent force in the middle and both edges of the keycap. With the wider keys that use stabilisers, it can get stuck/feel muddy to push if it isn't properly seated
i had to fully reset the keyboard it fixed it
Must have been some bug then or maybe the Hall Effect got a bit lost in the sauce
RGB or Hex code?
either one works
255/255/255 for RGB or #FFFFFF for Hex
Forced dark theme?
@delicate relic

wait, that is the software.
i don't know what am i saying then.
wait
Opinions on these keycaps on the gt-80 in pine green?
https://www.overclockers.co.uk/tai-hao-backlit-cubic-abs-avatar-2-green-149-keycap-set-uk-us-layout-kb-037-ta.html
Gmk british racing green
My 80he arrived
Dank
Very cool
Ok all of my other options are now out the window 
It looks so good 😭
Unfortunately it doesnt have international kit so kinda sucks for me if i want german layout
Ironic that gmk is german
Aston Martin looking ahh board
Mate of mine has a brg mx5, i should definately ask him to let me put the keyboard on the bonnet
Yup but its not them who design the kits
Alrighty where should i purchace them from as im getting alot of listings show up from alibaba
Depends where you are located
Uk, seems they are sold out most places
One of these should have em close to you (idk if in stock)
I‘m not sure if they have shipped yet but if they havent you can see and hope if any are sold as in stock
hey how do i change the rgb effect to show for example my profile keys when i press FN (turn 1,2,3,4 white when pressing fn)
These seem like theyd work nicely
https://prototypist.net/products/in-stock-ws-camping-pbt-keycaps
IN STOCK - Ships within 3 working days, all sales final Introducing WS Camping Designed by Kingnestea, WS Camping applies all-sided dye-sub method. It's a new technique that changes the old dye-sub heating process and solves problems commonly seen from traditional dye-sub PBT keycaps. Consistent Colours No more colour
Jae (Prototypist) is good people. Can't go wrong ordering from them.
Result! Ozo have the brgs' in stock
Why does Tachyon Mode activated cause the A key to be spammed? Was causing issues with Marvel Rivals/Valorant. The actuation point for it is at 0.2 as well. I can increase to test but this an annoying issue. This is a new 80he I got last week
Cleeeeaan
maybe u got continuous rapid trigger on
Yeee
I'll take a better photo at work tomorrow
Which cable?
Apperently support was able to hold the ready to ship package 
Now let's hope they can switch the layout to the US one cause i cannot play with small left shift.
Hopefully the keyboard won't arrive in shambles with a death threat.
this is sick, where did you get this from
https://keygeak.com/products/comic-line-cherry-profile-keycaps-set tock me one google search
Specs Profile: Cherry profile 136 Keys/ Spilt Spacebar version 141 keys Material: PBT material Production Method: Dye-sublimated Friendly Reminds: Only keycaps included, no keyboard Compatible with Cherry MX switches and MX-style clones Layout&Profile Instruction The Comic Line Cherry Profile Keycaps Set is crafted
but carefull consider it stuff like that looks less good in videos or real than on pictures
Hehe. Just arrived

yo does anyone know im kinda desperate rn
If changing the switch and doing a factory reset does not fix the issue, you'll have to reach out to support for warranty assistance.
Pick the category and issue you need help with, and we'll guide you through the process.
thank you so much!!!
Hello guys, any tip how to remove ESC keycap? 
You grab it and pull up. Or use a keycap puller.
Harder than others, but got it 

How often should I be cleaning my 80he?
More often than you want. Want being defined by your personal tolerance for gunk
For example, I want to never clean my keyboard. I should probably do it occasionally.
If you want to frequently clean your keyboard, then you should probably do it religiously.
I see, it's a little dirty I guess, had it since Christmas and not cleaned once, don't want it to end up like the rest of my keyboards considering this cost so much
Is there any specific way about cleaning it?
Time to get that mechanical keyboard cleaned up! In this tutorial, Sander explains all the steps and the best thing of it all is… only household items are required!
Keyboard used in video (Wooting Two HE): https://next.wooting.io/wooting-two-he
➤ Follow Wooting online: https://links.wooting.io/?id=VYzZf
➤ Wooting Socials
Twitter: https://twi...
Sweet, thank you
just use high airpressure and never look under it
I turned that off now, will test and see thanks
same cable from the box
Finally home
My new Zinc Alloy 80HE with Geon Raw switches and GMK Awaken keycaps 
Just don't use the canned air for other purposes lmao
Having to show my ID in the store to prove 18+ a few years ago was a weird experience. Wasn't aware of the other "uses" of those air cans lol
You can also use those small blowers that are everywhere on AliExpress. Back in the day, I used to clean membrane keyboards with a vacuum cleaner.
My Wooting won't turn on. I think I did everything right. I plugged them into my PC and it won't turn on. Does anyone know why or if there's anything I need to do?
Geon Raw HE Peak
during the construction of the wooting 80 H E. Should I do something because my wing does not light up even though it was built and connected in flight
@ember sky
Alright. You really need to take a breather. You're posting in multiple channels, tagging staff left and right (Specifically mentioned in the rules as a no no)
If your keyboard isn't working, you're more than welcome to make a thread over in #1019755933959733258 for help from your fellow wooting discord members. However if they can't help, you'll have to use our website to get customer support from Wooting. 🙂
sorry he wrote that it takes 2 weeks to reply
Yes - And in the meantime you can try your luck in #1019755933959733258 as mentioned. 🙂
Im writing from my new 80he, today arrived and im in love with the construction quality ❤️
How long it take to ship
7 days to greece with ups
solid
4 days, dhl to polandia
Sheeeesh!
Hope mine comes quick then, thats baller

Just because I ordered mine оn Thursday. If it had arrived just a day earlier, I would have saved a little, and it would have arrived on Friday.
I mean, if I had ordered it a day earlier.
expedited was additional for you?
I like your name btw, POM best
Pom pom
Nope, the thing is, on Wednesday, the price was around 980 PLN including shipping, but when I added money to my card on Thursday, it ended up costing me over 1000(around $250 USD)
Including absolutely everything I bought for the Wooting, the price increase was specifically on the module.
Currency markets have been extremely volatile over the last two/three weeks
Our stores are denominated in either USD or EUR. With these two currencies being the source of the seismic shift in the markets, other local currencies are all over the place
No big deal, I would have sold my soul too.
If I haven’t already…
good looking out wooting man, we just discussing though, we wooting lovers tho dw
Wish the white zinc was available when I bought
but doesnt even seem to be listed, other than if you get the uhhhhh module
Update on white zinc availability coming tomorrow
why cant i set the trigger to 0.01 mm?
Because it's .1 not .01?
what are the best switchs for wooting 80he for fps games?
mate, I just ordered it in black

Buy a second one
Any. Switches don't have performance difference.
It's all down to feel and sound. Aka. personal preference.
I guess you could make use of the 30 day return policy then
Though be aware it'll be about that long (layout dependent) until white zinc orders ship
baaaah
I'm okay, thanks for the information though
also returns suck, so I wouldnt do that anyways
That is kind and enlightened of you
Lekker switch L45 v2 or L60 v2
oh you're wooting man, hey wooting man, could I stick any 80% pcb in the 80HE?
or is it only wooting pcb
Keychron is a very uh, not nice company for replacements, so I was just curious if I'd have issues 4 years down the line
There isn't a single standard for 75/77.5/80/TKL so no, unfortunately not
You get a 4 year warranty with the 80HE (excluding LEDs) so we will support it at the bare minimum that long
...
can I leave wooting all my assets upon my passing?
4-year warranty is a godsend
Industry leading 
That's a very true statement, I was genuinely surprised seeing the specs for the 80HE
and the options for the build-your-own was pretty impressive as well
We also have a tried and true history of supporting all of our products long past the product lifecycle; the first Wooting One from 2017 still gets major software updates and we attempt to provide replacement parts when they are physically available
I'm in love 
Get Poms or 🐧
You think stock 80HE will stop having the population of the room staring at me while I type?
perhaps eliminate the "Wow, you're like smashing your keyboard" comments 
My Wooting with L45 switches is very quiet when I type.
It's not especially quiet, but steps can be taken to make it more quiet
It does matter what the reference point is
Hand lubing and tape mode
smh
stock sounded good in the audio clip on website
if I have to spend 7 hrs hand-lubing
I may just cry
Fr
I've lubed precisely one switch in my life and that was enough
Judged in French, double whammy
bookmarking this page, appreciate chu
nvm, it's everything I already know q-q
ooo I get the carrying case, I forgor
comes with spares and switch/keycap puller!?
god, I keep falling more in love with wooting
2 days from the warehouse to spain
SHEEESH
Same lol
Tbh people bitch but when you factor in a lot of stuff they give you it's really no different than a custom. Even if I made an 80% keyboard once I get an aluminum case, carrying case it's within range of a wooting plus I don't have to be the one to build and lube switches and that's enough right there
customs round to around $300 if you go all-in on them.Wooting = $300ish for zinc. even the plastic/"ghost" option I mean, it's extremely impressive
not to mention the layers
most people would never bother to do it, but it makes a huuuge difference
Oh my sweet summer child, $300 hardly covers the keycaps in the custom keyboard world...
"proper" customs are easily 700eur and more
Truly. I got my 80he yesterday and didn't even bother with the stock keys I switched out for my MV Terminal
my bad, let me rephrase. "smart" buyers can make their customs around $300, by not splurging on "custom keycaps" that use up their entire budget

that looks sweet
No matter what anyone says it makes me laugh when people say "we got 30 dollar hall effects" I mean yeah ok, with the worse bodies and performance imaginable. There's not a single "red dragon" like keyboard to challenge wooting and even then I'd congratulate them, wooting has everyone playing catch up I've been here since 2022. I gifted my custom 60he to my friend/co worker today and he was literally "I can't take this" MF YOU WILL TAKE IT AND ENJOY IT
Rather pay extra for wooting than any copy
I'd say anyone who "cares" about getting a decent keyboard wouldn't look at anything under like $60 - $75 USD
There's a few that stand out at their low price-points, but theyre not something I'd go around showing off, honestly
I'm likely going to give my modded k6 to my friend though, she said she can't find anything like it anywhere
and I was like "uhhh... ok"
I mean you can def make a cheap custom around that price, but there's a lot of work involved that I'm just honestly not going to do anymore. I had my fun with those but I'm good lol
I mean, sure. I can't really argue that
Terminal is one of the realy nice minimalistic gmk sets^^ but why not the Styled ESC key that one from terminal realy rocks hard!!
Cause I'm not spending that amount of cash for an esc key lol
well if you spend that 140€ for keycaps just go full in that artisian one is realy good 😛
Looked up some of the caps mentioned there, I'm sorry but 50+ bucks for a single damn keycap? I don't mind spending some money on my setup, but I've gotta be completely out of other stuff to upgrade/change if I spent all that on a single cap lol
But, to be fair, some of them do really look amazing. Especially the resin stuff
I paid 65 USD lol
I waited till they went on clearance and bought
Question, has anyone with the GT-80 case experiened any static shock from it? Wonder if Wooting's pcb has built in protection
Is it very instant or continous?
If instant is static buildup from dry/cold environment.
If continuous check if there are exposed areas of pcb and electronics touching it. It could be earth leakage.
Hi guys! I had a little heartattack xd because i saw a bug in the 80e keyboard, the esc key with the Signal RGB software is not working
If i close it and unplug and re-plug
when it gets to the default leds works again
It happened a lot on my old keyboard that was aluminum so that's why im worried. but the GT-80 has rubber stops between to pieces of the case so it might be fine
Could be from your PC/motherboard/usb port.
But question is, is it continuous shock or momentary shock?
it was just a quick shock. i have a whole new pc now since then
could be a software bug?
You are building up static.
What you wear also may incur static charges by material rubbing on skin.
And if you environment is very dry, static will build up
I have this when my office use temps of < 25 degrees.
yeah. I do have carpet in my room and have a chair mat
Your carpet is the culprit.
If you can't remove it can try esd straps
I have never used that even building both of my PCs lol. Poeple say they dont help much
You shouldn't touch any pin/exposed electronic if possible to avoid ESD damage
It is restricting.
The other alternative is to walk out to humid or open areas to discharge from time to time
Would putting something in the keyboard help? Like foam?
Hmm nope, there is metallic contact outside the case.
But esd on the case is ok
Since it protects your component by shorting to ground
Humidifier also could help
Or maybe a firmware issue idk, i have the ISO version of the keyboard
signalrgb fks with wootility
u can try entirely closing signalrgb then replugging ur kb
if that doesnt work jst delete it entirely and replug lol
so I've had sticky L-Shift since the beginning and thought it should be an easy fix (apparently it's a common issue!)
what is the actual fix? disassemble, clean, re-lube and that's it? or do I need new springs
Most likely cause are some dampening pads below the stabilizer. To remove those you gotta screw the PCBA apart, unscrew the stab to lift it and peel it off.
thanks for the insight 😄 this is the definitive answer? I don't know if wooting took a look at this issue internally
and what happens if I take the pads off? won't it affect the sound and feel 
Definitive answer? No it's a very likely theory. Suffice to say we're no longer putting these pads below the stabs, because there's been a few too many issues with them.
It will affect the sound a bit, cause that's what they're there to do in the first place.
hey quick question, those keys that have no text on them don't work, is there some optioin that i turned on or do i have to do something more complex ?
i went to teh options and went for restoring keyboard to the fabriuc settings
You imported a 60HE profile to the 80HE. Those are just blank keys. Time to fill them out with the missing keys.
oh okay but why did it happen by itself_? like when im creating a new profile now in the software it creates a 60he prfoile i guess
It shouldn't. 🤔
it was also creating new profiles without those keys but I checked in inactive profiles for profiles with those keys and now it creates profiles with them lol
I don't have a 60he
also I haven't uploaded any profiles from sites or anything like that
If you could screen record a video of making a new profile and it doing this again, I can pass it on to the dev team for investigation.
o
okay If it happens again i'll let you guys know and record it
try it rn if u got time
after I moved the inactive profile with those keys to the active profile it started creating profiles with those keys so i think it's fixed for now
I created 2 new profiles now and they have those keys
@sacred crypt What Wootility version are you on?
You get the bad profile just from creating a new one?
Now it's fixed but when that happened I was watching twitch and randomly my backspace stopped working I thought it was some windows problem so I restarted my PC and it still wasnt working, I went to wootility and thought it was some kind of bug so I restarted to the fabric settings and it was working for like 10 minutes but it happened again, it looked like all the active profiles had no text on those keys but there was one inactive profile with all the keys listed so I made it active and after that every new profile had those keys
Hmmm, most of the time your profiles will just use the remap keys from your first onboard profile, i.e. "linked". So then it was your first onboard profile that was messed up for whatever reason and the rest followed
oh okay, but if it happens again i'll let you know and record everything
Please do 🙏 Would be very helpful for figuring out where issues are
is it possible to get a remap key that just opens up wootility. ik i can literally just hit windows and type it up but id prefer being able to bind it to the function layer
AFAIK there's no way for a keyboard to tell your computer to open an arbitrary app
So a feature like that would rely on software running on your computer already to open it
if im reading this right that means its possible when we get the background service?
is there any way to replace this rubber under the stabilizers? If it wears out
Rubber? You mean the little pads?
yep
We don't provide replacements - Because we're no longer using them.
They've caused some issues with keycaps getting stuck on a small number of 80HEs.
Hey guys, did u have a problem with the shipping with the wooting 80HE ? i live in France and the order number is not working
Yeah, to track it on the DPD site
So you have tracking, but it doesn't work yet. That's pretty normal for the first couple of days.
I ordered it last week, thursday
Okok, and you have an estimated Time ? To know when the link Will work
Depends on how quickly the courier works. Typically tracking codes work within 72 hours or so from you receiving it.
My order was returned for no reason 💀
Because its my first Time , I ordered it with the wooting wrest rest and ABS KEYCAP
Because yeah, it’s + 72 jours and it’s still not working
Yooo wtf , a 80HE?
Pick the category and issue you need help with, and we'll guide you through the process.
Yh
It didn’t even leave the country to mine so I guess I’m cooked
Yup i sent a mail tuesday
Good luck buddy
cooked fr
But where do you live?
Uk
Oh okok, but where are the wooting from?
Netherlands I believe
Okokay
yo
Oi
My 80he finally came yay
Congrats! I'm hoping mine ships out today
i can tell you its worth the wait im loving it already
I'm so jelly. What specs you get with yours?
i got the zinc in black and just got the lekkers 60 v2 to try out
and i really like them even stock lubed
love mine so far!! best keyboard I have ever owned
Bla bla something
That's ... not how those codes work.
You only have access to them, if you have previous purchases provide them. And in that case they would automatically fill in anyway.

Oh my bad youre right I forgot that you had to type in your adress for the shipping to count
or use Discord Discount
Guys if you enter promo code Gullible, you get 100% off
Okay I deleted the message so I don’t spread misinfo
That's wild, something written on my ceiling happens to be a discount code 😲
Exclusively for you mark
I need to look at your ceiling
thats a weird looking code
Sir there's a hole in the walls
Yea tell me about it, fucking lazy builders

There's 3 of them
And does the promocode DateWithCalder give you 100% off + a date, or is that one exclusive too?
One day, Dali will attempt to jump up there and either succeed (problem) or fail and fall down to the kitchen (problem)
Mmmm..... left at the front door, luckily someone was in
After how many days?
I ordered in february, shipping took 3 days
Okok, where do u live? Like Wich country
Ordered the module, and other bits and bobs on the 8th and its just arived today, uk based
where are U from ? In my country its not possible to leave package like that - deliver to recipient hands and gather reception confirmation is a must....
?
he said uk 💀
Dpd?
welcome to international shipping and every country and courier in said country working different
Yes
Uk
Ok I ordered it let’s see when it arrives
The other option was ups, they do the same
lets gooo just confirmed my address im so hyped to get my board :3
me too :D whicht country will they be shipping it to you? lets see who gets it first
the US 😼
ok germany for me lets see :D
Hey guys, so i need some help. I've installed firmware update some minutes ago and generally, i try to save a new profile on my wooting, but i am not able to do. At least i dont have a save to wooting button, or something else. Drag and drop does not work. I figured out, that it seems like my wooting is not connected:
HOWEVER:
if i connect a new device
however, if i press connec,t nothing happens
this didnt happen in the past, reboot didnt work. I think its not after the update like that
App? Browser?
browser
Which browser?
Remove the 80HE you have showing as disconnected, and try to pair it again.
ok, do i loose everything then?
i have profiles already customized, but they are on my keyboard, you are right
Are you able to export them then re import afterwards?
i will
i am bit afk, and will try out. Thank you so far.
turns out @buoyant solstice being afk for like 10minutes solves the problem, its connceted now
Check DMs
if i change my mind on wanting the keycaps and switches along with my 80HE, is it easier if i make a ticket or just return them seperately. My order is in preproduction it says it'll arrive in late april (rather it not get delayed due to a ticket to change my order)
Up to you. Returning means you'd be paying the return shipping.
switzerland
Thanks a lot brotha
Thanks btw, maybe if I dont get it in next week i’ll worry
Last thing, it was already ready? It was preset ?
i bought it preassambled but without keycaps since i had keycaps already
Okay
@gritty ravine I feel like youre stressing a bit too much out here. Shipping, delivery time etc. is all different based on what you ordered and where it needs to go. Just keep an eye on your hub with the latest info. Once your order is ready you will get a shipping link and then you can track your order 
You are the best, Thanks
Yeah Because I have the shipping link but its not working when I use it to track my shipping order on Dpd’s site
But I bought the wrest rest thing + preset keyboard 80 HE and I live in France so maybe they don’t have my order yet so I Will wait, but thanks for the info y’all
wdym its not working?
what does it say when you click on the link

note that it can take up to 72h for the the tracking to show
On the site it says : We don’t find your order
has it been over 72h?
Yup
Shipped from the 6th march
The 72 hours is not a guarantee, only an expected average. You're more than welcome to reach out to our support via the website. 🙂
And fit the link the 6th too






