#🌟│wooting80he
1 messages · Page 305 of 1
lets go
is it worth tape modding the 80he with the alloy plate?
No one was complaining lol all I said was the fire wasn’t near the ports.
Also i can almost guarantee nobody living in Hollywood/Hills is working at the ports
hi i got a quick question idk if its the right chanel, i got my 80HE today and wanted to ask should i just install Wootility v4 or i saw there is a new v5 beta, idk how stable the beta is or just go for the v4
sounds like 5 is solid
okey i dont know anything of the software thats why i wanted to ask, bc on the v4 says stable and on v5 says recommended
you can just run it in browser tho
You need v5 for 80he, but also I'd recommend v5 over v4 anyway
you dont need to install ikt
I still prefer the app
has app more options ?
okey so i need v5 for my 80he
Yep
okey is v4 old?
Nah, I just prefer apps
Yeah they moved to v5 alongside the 80he launch
oh okey, i wonderd first bc when i see beta i always wait what people say
should i also go for the latest nov?
thers is beta 1 and 2
oh bad question i think lmao,
Web would ultimately be easier as to update it it's just a page refresh
But if you want the app I'd go with the latest
yeah i know, but i am more a fan of the app, but now i see beta 5 on january 14th, i should just go for beta 5 or?
I would yeah
Sure what's up
on my apex before i could set the rgb that it fall of, in the app its going to the side like a wave and i had also a wave but it goes from the top to the bottem, and when i click it makes more rgb can i turn it off for the clicks?
i am a bit lost rn
You might have an effect like aoe or ripple on
on effect i got wave
Can you explain what you mean by more rgb when you click?
when i click on the key i click its comes a yellow color
Rn Not yellow know Green but Like other colors, I know it but I don’t know how to turn it Off here
its under rgb settings
are youre german ?
ok just switrched it to english to explain
this is most likely in rgb settings
and its either the trail, rt or aoe
yes
rt makes the key shine short when you pressed the key io thing, trail does the sam,e but stays longer and aoe does the same but for all buttons arround that
im prinzip das was ich hier drüber geschrieben hab auf deutsch heisst es nur schweif 😛
du hast 2 effect layers trail die kannst du wegmachjen
dann sollte das auch weg sein
also bei effekt eben 2 raus
ah ja das war es danke, weißt du auch ob das bei wooting geht das die rgb von oben nach unten geht?
Allso bei den effect layers Effekten kann man bei einiges auswählen ob's von Li nach Re oder von oben nach unten geht
ah, ich geh die grad durch was die so machen
bei den base layers geht von oben nach unten nicht
bei dieser rt reaktion ist dann wieder der effekt wenn man tippt
musst dann mit ner base arbeiten und dann über effect layer scan ujnd anpassen der base brightness kannst du dir dann was basteln
jo hat ich ja eben schon gesagt bei aoe auch
guys, this is an english speaking server, go talk german in direct messages 🙂
sorry 😛
sorry😅
just pm me directly if you have any more questions but i allso just got my wooting today so there migrht be people here that have way more clue than me 😛 all i know is just from trying arround a bit earlier
okey i send you a request
Guys should I spray paint the bottom case white
theoretically never
😄
after you had to clean your first spill of soda
whats that
got it boys
im serious
the lube isn’t supposed to dry up or anything. the issue is that dirt and grime can get in and over time mess with how the switches move. but realistically you probably won’t have to worry about relubing the keyboard for at least 4 years.
wym the "bottom case"
also if you wanted to spray paint it white, why not just get the pre-painted white plastic case instead of ghost
So, how tough is the keyboard as a whole?
I saw a bug around my desk and kinda freaked. I don't think I hit a key too hard but I don't know how much punishment the switch/module can take?
If you wont stab pcb it should be fine
well its zinc but like i dont know how much pressure it can take if i end up doing something stupid during a bug attack
The case will not break first
I imagine you’d have to hit it pretty hard to do permanent damage
You have to literally stab pcb to break it
Oh. Huh.
Yeah with your paws maybe if you ball your fist and yell out to the god of thunder then slam it down on top
Otherwise you’re probably fine. Clean up the bug guts though 🤢
Glad it didn't crawl inside, I would have absolutely lost it.
i think im being dumb but idk, just got the keyboard today and plug the cables in but the keyboard is not turning on. am i doing it right ?
Preassembled? Module?
the 80he and yh
yeah to which one preassembled, or module?
preassembled sorry

NP 😄 but yes it should be plug and play
its not turning on sadly
i tried the cables with the wooting on another keyboard and its working
and use another usb c cable on the wooting but still not turning on
does it show up errored in device manager or anything
doesnt show anything
not lighting up
yeah i'd just email support
🤝
gl
would you guys recommend the plastic or zinc 80he?
depends on if you want a heavy keyboard or not
I will say, the zinc feels a little muted too? But preassembled.
any other differences than the weight?
ah i see
as its subjective if you like one or the other sound
wish i could try them side by side hahaha
Ah, there are two more things, really.
Buy both and you can hehe
I dont have lube yet but damn tape mod really did a lot for the sound for me
The plastic comes with a ITS A SANDER

The plastic one comes with a dust cover, Zinc doesn't but it comes with the travel case by default.
sander rn
space bar still sounds fucky thats the only thing I gotta fix
real business man yes
silly question, if i order something that needs pre-order in checkout will wooting send the rest of the batch 1st?
since youre in japan now and a real business man i expect you to sleep drunk in some alley like the other japanese person we have
That's my weekend tradition. So tonight it'll be like that 😛
and then we find you on some random guys stream
I don't know which switch to choose. I've never tried any of them before
Geon Raw HE 50g is a safe switch
so are Jade Pros
Japanese Wooting interview with drunk Sander trying to explain HE with broken Japanese
Have you seen calder speak chinnese
nope
should I use l60 v2's or buy some raws?
raws are the opposite of "thocc"
Keep them if you like them
would yall say the stock keys are good?
hooray no more hold
i ordered 80he but i cant fill customs id, how can i solve that?
i will lean in on Geon Raw HE since I have a lot of experience with them, and none with the Jade Pro, more so going off word of mouth here. No need to tune Raw HE or Jade Pros whatsoever!
No.
There isn’t one
Only frost ghost and black
I got the frost ver
And mainly the reason white zinc too expensive am poor 😭
there isnt a white 80he plastic?
Nope
tf
Check their website lmao
wait is that unlubed
Seeing all these estimates for late Jan. isn’t there an inventory happening in the warehouse in late jan and nothing will be moving? Sure I saw a post about it
Different products? Different warehouse?
Each product purchased is part of a specific batch, and orders don't ship till everything is there.
Makes sense, thanks
I confirmed my address last night… hopefully not long to go!
In the meantime, how long is the usb cable?
2m for the 80HE, 1.8m for the 60HE, 1.5m for the UwU
rlly
No probably not, batch update coming out later today

Roughly 1 week behind that estimate
Which cable is better/faster, the one delivered with the 80HE or the "Wooting Detachable USB-C Coiled/Straight Cable Set" from the store?
The same. 🙂
We offer the coiled, detachable cable as an option for those who like coiled cables, but don't want to deal with potentially "bad" third party cables.
All that extra length puts more strain on the wiring, so it has to be done to higher standards and tolerances to ensure it is problem free.
Neat, thank you!
When my wooting Keyboard comes back to you because a failed delivery adress How Long does it takes to get an email from you?
It should arrived that Morning
Hello, i have been using apex mini 9 and just switched to wooting 80 he and im having a hard time to get used to i feel really slow on it could somebody give me tips to get used to this keyboard?
why would people like coiled cables
for the aesthetic
Why would people like (insert anything here) ?
There are like 8b humans… people have different likes…
get im mods
ah yes the sten community
oh BTW has anyone seen an irl model of the bone 80 case
irl unit I should say
yea but its just a cable
Good news!!
A beautiful day has just begun 
I want my keyboard 😔😭
mine come in april hahah
I got in December and waiting until February
I ordered it like 24th of December
I live in the US
Ur in Europe ur time will be completely different I believe
I ordered in September and it arrives today hopefully!
if it gets delayed again 🥲
I mean it is in my city according to DHL. So if these guys do not get it to me today... It is 30 minutes past noon... I would be surprised...
I ordered dec 10th and it’s arriving in mid February
I will receive a second confirmation email with the delivery date?
I ordered on Monday, when am I supposed to be delivered?
just wait for it
usually any notification on your email or wooting’s web
best way to see the estimated delivery date is going to the hub https://hub.wooting.io/
Access and edit your orders, connect your discord, and manage your Wooting account.
skibidi wooting
Inside the 80he box there's supposed to be 4 more switches, are they 2 L45 and 2 L60 ?
3 L60 and 1 L45 is what i got
Yeah same thats pretty weird unless it's actually supposed to be that way
It is
It's also what I got
I believe the idea is for the L60’s to be spares and the L45 so you can see if you want to change to them in future
LETS GOOOOO
I ordered a week or two ago and mine’s arriving in 2ish weeks
GT 80 should release this month, no?
I just installed the keyboard but the height of the keys is different, is this normal?
I tried that
Pog
Worked
It was my first time building a keyboard like this so yepp newbie experience
All good. Same thing here
Received it today after 3 months waiting feels nice
100%
I got mine yesterday and it's 100x better than the razer huntsman mini I had
The razer sounds broken compared to this
just bought and 80he boys any problems with it?
Only problem is that you didn't buy two 
Yeah, can’t take it with you when dead
80he vs huntsman mini vs k552
yes
Hello everyone. I have had my 80He since today and am very happy with it so far. But I still have one or two configuration problems with the Wootility.
Except in the predefined “Typing Profile”, the Backspace, Enter or Shift keys do not work for me. Neither in the Rapid Trigger profile nor in the user-defined profiles.
Is this intentional or is there a “trick” that I am missing?
I would also like to deactivate the afterglow of the keys after pressing it in the “Typing Profile”. Unfortunately, I can't find the corresponding option for this either.
It would be nice if you could help me here.
To get rid of the "afterglow", click the X next to the effect layer, presumably Trail, seen here on the lower right
For your backspace not working, that seems strange. I'd check the key mapping on those profiles.
its not remap related but most likely a calibration issue with too low of a rapid trigger/actuation point
so the keys never read an actuation or deactuation
The Problem is on of my custom profiles have no Actuation set or RT and it has also the same problem as the rapid trigger profile with these settings. only typing profile works fine. is happening also after keyboard reset. newest firmware.
can you send a screen shot of remap?
Hey guys, finally got my wooting 80HE today ❤️
Im having a problem tho, macros dont work with my game, it only works outisde of it, does anyone else have the same issue?
ye
is there a workaround?
Yes - Stop cheating 😄
(Or buy a keyboard that doesn't care about fair play and lets you record macros in hardware I guess)
well, its an mmo that im playing
macros are ingame from the game itself
just not working right since game is kinda old
talking about Lineage 2 btw
You have been provided with the options 😄
well thx i guess
Does wooting make it easier for games to implement anti-macro? Like will wooting not run the macro if it detects the game disallow it? Or is the game just implementing something thats fully stopping the macro from working
Wootomation is only software based and calling windows apis, this can be "blocked" by games/anticheats. The keyboard itself does not have the common macro functionality found on other keyboards.
We're not trying to hide that they're macros. Fair play and all.
If I pre-ordered the PCR black plastic 80HE keyboard is there any way I’ll be and to change it to the ghost version?
After seeing some pictures and videos I think I would enjoy that one more with the LEDs
@lime aspen hi can i ask you a question again?
yeah you have to contact support
Okay just did thanks
Do you also happen to know if the lettering on the keycaps are transparent? Like will back leds shine through the lettering?
depending on how far out your pre order is you might want to put the order on hold to be sure that they get to your ticket before it gets fulfilled
yeah it does
Okay will do thanks
Oh nice okay I did not know that
Hi guys, i have a a question why is wootility Not sync With the Keyboard, yesterday I changed the Switches to 0.1mm and other things but but now I came from work turned my pc on it’s all reseted
go in rapid trigger/actuation tab, keys are not 0.1?
your w and e are 0.1, select keys and set them to 0.1
Damn i'm having this exact issue and this doesn't work. Did you ever experience it again?
ah i see but why does it not change all to 0,1
if you want whole keyboard with 0.1 you need to select all keys
if you want only wasd and some other keys, select them and set your actuation and rapid trigger
oh okey i thought its sets all to 0,1 than
can i ask you a few more questions? i am a bit lost rn first time wooting😅
does wootility have to start with the pc to sync the profils and stuff? and is there any way to change profils without open the software? bc it got no display to change profils
hello
no
just bought wooting 🎊
you can swap between profiles with mode key
The Keyboard itself can store up to 4 different profiles on its own memory. Those can be swapped to with the mode key or via fn key + mapped profile key.
There is no need to autostart the software.
Only thing you need to open the software for is doing settings obviously and when you want to swap a profile that you have on your pc with one thats on the keyboard.
okey good to know
and its normal that the rgb stops when taychon mode is on or? because its the rainbow preset but its not moving
Yeah, all RGB is static when tachyon mode is enabled.
No animations or effects
its normal okey
Yeah it's normal.
oh ok, thats fair. It would be cool to have hardware macros, but i get the fact that could be seen as cheating, and not really align with wooting's goals or wtv
okey i tryed profil switching also working when i got 5 profils i would have to open the software for the 5th profile right? bc only 4 can be changed without
Yes
but can i change the profils for example my 4th profile its not that important anymore but dont want to recreate it can i change it on the profile to only safe it in the software? because when i create a new i can set it to only software or keyboard
You can move that profile to your pc and move a new one on your keyboard. You find it under "My Profiles"
ah okey so if i dont need the 4th anymore i just drag it ino inactive, thats cool
Yes
okey thats cool, thank you
in september I received the 80he with wooting abs keycaps. I sent it back and now I have a new one with some pbt keycaps and the feeling is completely different
can keycaps change sound and feeling on keyboard?
Hey, just got the 80he yesterday, was ordered for my boyfriend as a bday present. I alredy love it! I didnt realize it was this quiet, I will be able to finally sleep while he is playing cs 🤣

LMAO
i reconized it only change the standard profile first and the last used, do i have to change something for the mode key?
or do i have to bind f1,2,3,5 under key assignment to A0,1,2,3
Under Remap: A0-A3 are profiles 1-4, Mode is last used and first while cycle is obviously cycle between them.
You can also remap them in a function layer.
Arrived before the keyboard itself.
so under remap i would have to set A0-3 to F1-4
Abs and pbt are different materials and absolutely make a difference in sound and feel. I always say go with pbt (preferably double-shot) keycaps over abs because it’s objectively a better material. Only real downside is pbt keycaps are harder to manufacture so defects are more likely (still uncommon)
they feel good ?
yes i also got them i like them a lot
Wife material, he’s a lucky man
oh ok. ABS felt a bit better to type on but especially sounded way thockier
To whatever you want. Any key or any key inside the FN layer.
thank you
Most people prefer the sound and feel of pbt but it is entirely up to preference
If you go abs you will definitely have a harder time finding custom keycap sets, most sellers do those exclusively with pbt, ceramic, metal, or resin
oh okey its not standard my bad lmao if i press fn and q nothing happening
oh wait
The others are not yellow because the key is not coloured...
oh yea my bad... 😅
Hi guys question do i need to assemble it when i receive my wooting 80he
did you order it as a prebuild
Just received my 80he today and it’s absolutely incredible!!
dont let the cat on the keyboard
You need to put the keycaps on, that's all 🙂
Cats and keyboards are a match made in heaven
Alr thx
Phaha just trying to do my uni work man 😭 she won’t leave me alone
Haha nice
its been since november... i cant believe im finally seeing it ship
Let her take a stab at it
Oh damn, somehow I got mine after only like two weeks. Well worth the wait though !!
can you post a picture of how they look on the keyboard please 😅
are the keychron cables safe to use with these? or anything else good out there cheaper than Drop?
😢 the delay increases every day..........
i postet mine on the wootstations
didnt tested yet. I`ll open only when my 80HE arrives
Cute cat. I love Black Cats
ahh yes now i see. they look clean
questions, for the stabilizers that come with the keyboard, I don't have to clip the stabilizers right? Saw a video where I may have to do this but they say it's for older stabilizers. Thanks
i might order black and white so i can make a little pattern lol
Yes
are u walvis 0?
Nicee😍
HEY i want to have a dot on one keys i dont find it in wootility
If one of the many reposts of this question made sense someone would probably help you.
I would like to configure a key to have a point but I can't find it in wootility
sorry im frensh i dont know how to make it more simple for you
I don't know what you mean by point, but you can remap keys in the Remap section.
dot
do you mean that it does something else if you hold it?
click all the way in*
when did u order?
oh
I think they mean that they want to be able to have a . on one of their keys that aren't .
or something???
Right, you can click and drag the . to any key to remap it
Try searching for "period"? It may be in a different section for your language.
14 november
i have double point xd
Maybe "dot"? That also brings up period for me 🤷
damn i’ll take the one i ordered in beginning of this month won’t come in for awhile
well that's just weird
yes definitely
@vernal quest it says french is only 70% complete so maybe change language to english type in period and then it'll appear??? idk
it appeared for me though
Wootility inherits your OS’s language for layout, youd have to check there
oh good see
i gonna try right now
if on the french layout you need to hold shift or something to type a period then you cant remap it. you can only remap the key you press after you hold shift.
3 reeds lane
Oh yeah, looks like . is Shift+; on French layout?
i have the ansi iso
but i am frensh
i use it in qwerty
that sentence didnt make sense. either its ansi or iso
do french keyboards not have . by default?
@vernal quest also can't you copy paste . from here
that should guarantee it pops up
they already checked and it comes back as :
oop
so idk what windows keyboard layout they have set but it seems to not have a period as a base layer key
Try putting ; on a key and pressing Shift + that key
oki
i mean the easiest answer is if theyd tell us what keyboard language they have set in windows
I assume french xD
which of the many
i love you man
damn there's 9 lol
exactly
its works but Wtf space engenring to find out
and normal french azerty has a .
are french keyboads azerty normally?
idk which french layout needs semicolon and shift
yes
the more you know
and I thought the nordic layout was cursed
ah they set it to french legacy
not french standard
https://kbdlayout.info/kbdfr Legacy
https://kbdlayout.info/kbdfrna standard
See scancodes, virtual keys, shift states and more for French (Legacy, AZERTY) as defined in KBDFR.DLL.
See scancodes, virtual keys, shift states and more for French (Standard, AZERTY) as defined in KBDFRNA.DLL.
I had no idea there were so many Fr layouts :TIL:
my man set your pc to united states english keyboard language
dont remap anything
and your legends will match
ok i gonna try this
check how many spanish there are 💀
make sure to undo whatever you did with the ; in wootility
i just question why people do this
idk why you cant get orange juice where you are rn but uh k
I can get orange juice but I can't get them squeezed out of machines fresh
ok sinasappelsap doesnt mean its freshly pressed
the one brand that actually sold them as if they'd been squished out a machine decided to remove the flesh from them and make them taste like all the other brands
it literally just means orange juice
is there like a specific name for the fresh sinasapplesap machines
all the jumbos I went to seemed to have one
i guess youd call them just citruspersen or sinaasappelpers
aka orange press
or citrus press (since they technically can squeeze other citrus fruits)
and yes supermarkets have those but sinaasappelsap is just the generic term for orange juice
fair enough xd
so youre buying verse sinaasappelsap aka fresh orange juice
still could be filtered but at least its freshly squeezed
filtered as in the flesh is filtered or what do you mean
yes
oh yeah I also really liked the prosciutto jumbo sandwiches
or whatever they had on it
bruh I was wondering why alt prt screen wasn't doing anything sometimes and I remapped it to do nothing when I full pressed it lmao
LETS GOOOO it works my bad do xd
just be aware you cant type french diacritics anymore (so some accented characters)
OHw ok i take note
idk how important those are really but its a good to know
is there a way to disable the windows key in a specific profile beyond unlinking the Remap?
there is a way to fix that with the united states layout BUT it messes with soem normal typing
of curse brada
you can use the key lock on an fn layer on the key that is winkey. then pressing fn+win key disables the key
otherwise you can only unmap it
(btw we map this by default so fn+winkey should disable it)
THANKS YOU EVERY ONE WHO HELPED ME HAVE A GREAT NITE !!!
how do you know it's disabled
well, i mean i guess i just tested it so there's that haha
oh you right, that makes sense and was just hard to see since i'm on a monochromatic led lighting and don't have shine-thru caps
all good
how long did it take you guys to get used to the actuation point? this is crazyyy fast 😂
One of the best Discord community i've seen !! thanks one more time !!! big up to : @winter nebula @lean pagoda and BigBrainAFK | Tony for your help !! i can tape now correctly after 1 year using ansi layout ! you cant realising how much is satisfing to use my keyboard for the first time XDDDD
There is no way to keep it persistent across restart i guess?
Anyone else have an issue with rapid trigger enabled? If I'm using my W or S key at the same time as using sideways inputs, sometimes the W or S key just cut out. If rapid trigger isn't enabled it doesn't do it
Think I figured it out ^ It was just the actuation point being too low and I don't think I was pressing the key far enough to trigger it
I just got my keyboard, my friend told me that the space bar sounds better than his? have they improved the space bar lately?
Factory lubing is not consistent on all keyboards
some may sound perfect out of the box and others need tweaking
so it is just lubing no redesign ?
he said that he heard something in youtube about that they wanted to improve the space bar
If thats the case they haven't done it yet
never heard of the current batches being any different then the first
Is there a way to make the space bar sound more creamy?
my 80he overall sounds perfect except the moment I press my space bar
It’s alright
the right part of my wooting just doesn’t work, everything from backspace down to the arrow keys, i’ve tried swapping the switches and no work
\\
ok i reset all settings and it works
lowkey shitmyself thought it was broken
When will the White 80HE Be on stock again?
I mean, when will it be delivered for people that ordered
last i heard is they approved a new method of painting, my guess is after they finish fulfilling it they will put it back in stock
When it is ready 🙂
Gosh, I think I broke 5 switch pullers already trying to pull out even 1 switch, about to give up on trying to mod it 😅. Anyone got tips on pulling the switches out? Seems unusually tight to get even one out.
Doing a little wiggle helps with pulling them out a bit, otherwise you can disassemble the board and pop them out from the bottom of the plate
Hey Mango! Thanks for the reply..a bit new to working on keyboards in general. Would I have to take off the little PET film, then unscrew and then push them out from the bottom with your fingers? Did try wiggling them...even to some extreme of trying to yank it out on one switch just to see how much it may take..to no avail..so maybe I'll try the bottom method
Its mainly just a lot of screws when it comes to the disassembly, you do have to remove the already applied tapemod on the bottom to get to the screws but just keep in mind the JST connector and not unscrewing the stabilizer screws which shouldn’t be too bad as the stab screws are a bit smaller than what holds everything else to the pcb, when you have access to the switch plate you pretty much just pop them out from the bottom with your fingers
I ACTUALLY figured it out this time, it was the polling rate being set to 8k in the settings, it was causing my keys to bug out a little bit, I set it to 1k and it's fine now
@scarlet valley forgot to reply, please read my above message. I would attach a detailed video showing that process but there’s not too many that go into enough detail imo, this is pretty much the closest one ive come across but it’s strictly only for the first few minutes in the video
https://youtu.be/9f7AqnHrhQA?si=odVCm3GWXGePC-po
How To Mod Your Wooting 80HE!
BUY PRODUCTS HERE:
Keycaps(Cheaper Alternative ): https://novelkeys.com/products/cherry-taro
Painters Tape(Tape Mod): https://amzn.to/3YUSs6e
Silis Sound Dampening(Bottom Case): https://amzn.to/3UBniOK
Krytox 205g0 Lube(Switch Lube): https://amzn.to/3Cmh3bh
Krytox 105 Spring Oil(Spring oil): https://amzn.to/40qpw...
is your firmware updated? that shouldnt happen when you use 8k
Yeah it is, would it work in any USB or would it need to be in a USB 3.0?
Any usb should work
usb2.0 is enough
can try other usb cable
How come you can have Tachyon enabled with 8k polling, even if the keyboard is set to 1k polling in the keyboard settings?
Ohh okay, my bad
I'm gonna reset the keyboard and try it just on the default settings
Thank you for your help
Thank you Mango! I will go ahead and try this out!
If you ever get stuck, theres lots of people in #🔧│keyboard_modding that would be able to help, i wish you luck 
Oh sorry one more thing @fallen epoch. When you say push from the bottom, do you mean push the two..I guess, prongs? from the bottom side like those two holes on the left and right?
Nah the switch plate is what really holds them in which is that white piece on top of the pcb, when you get the switch plate out youll push on the bottom of the actual switch to pop em out
From what i know at least when i opened it myself to do some changes
@scarlet valley Follow this VOD
Should be easy to understand what you have to do
Pulling lekkers/raws without disassembling is hard
Thank you shafie 
PS, Bless the Wooting community for helping so quick 
What do you mean
hello i have a question in wooting software cant you change tick rate
Tick rate of what
can you download more polling rate for the wooting 80he
yes
yes
I have 3 profiles on my 80HE how do I swap between the 3? the mode button only swaps between 2
80he's on-board profiles are switching randomly
is it a known issue?
but it doesn't happen that often
try fn + 1 , 2 , 3
Currently no
rebind the mode key to cycle
@regal raven nicknames that use invisible characters, use characters that break Discord formatting, or that make taking moderation action any amount more challenging, are not permitted in this server.


New keyboard day has arrived (Walvis 2 batch)
Wish i got the wrist rest. I already have one, however i forgot that it wouldn't fit with a smaller keyboard..
The paint peels on the black zinc :/
Hope not, that's what i got yesterday
already has started got it in november
That's a defect, not natural wear.
Please create a ticket on the website for assistance. 🙂
Good to know that's not natural
Yeah just searching for paint peel on here doesn't make it sound like its a normal thing.
What's your guys opinion on rappy snappy and snappy tappy? Do you think it's worth using or not?
Hi, by défault on the typing profile, when I press à key theres a yellow rgb effect which I like, but was not able to find where the setting for that is
If you can use SOCD (snappy tappy), then imo it’s more intuitive.
If you can’t use SOCD then you can’t use it.
I wanna do thé same for the rapid /gaming profile
Tbf I tried CS2 with snappy tappy and it worked fine, just not sure if it's really making much of a difference
it's called trail
is there a way to change the caps lock indicator color cus with white rgb i can't tell if its on or not
are you talking about on the switches RGB? that would be trail like Heidi said. if youre talking about the light bar that would be key depth indicator on the light indicator section
oh nevermind i found it
Yeh you either have to have the absolute sloppiest counter strafing technique or specifically train to exploit SOCD to really gain an advantage in tac shooters using it.
It probably has the biggest effect on Overwatch where the developers forgot to give characters momentum and called it a feature.
In pretty much every other game I just think SOCD behavior is more of an intuitive QOL feature than an advantage.
Tbh I enjoy SOCD the most in PVE and single player games.
#🕒│waiting_room ? 😄
give it like a week i would say
broo i didn't even know there was a room for this
i'm so excited that i can't wait anymore
@lime falcon @fallen epoch Thank you to both of you 🙏 got the switches out popping them underneath 
Nice
i was the same, the keyboard itself is 10/10 honestly, sound quality everything
(me personally i dont like the wrist rest bc its silicone/dust catcher but its whatever)
keyboard is great!
worth the 4 month waiting lmao

daamn 4 months ! mine around two months a half
yea it was crazy long but worth
ordered it early october
I’m happy just using it without any features enabled and just having the adjustable actuation point. Plus my old keyboard (Razer huntsman mini) felt and sounded horrible compared to the 80HE, I can’t even put into words how much better it feels and sounds
Still having an issue with the inputs if 8k polling is enabled though
I’m happy to just stick to 1k though, I feel like 8k is barely noticeable anyway
mine around early December can't wait for trying it
I was surprised when the wrist rest came and it was just full silicone, it made me laugh
you know my keyboard is with me since 2020 it's gonna be a huge upgrade for me
Hey is there any issue with the north facing leds and non shine through keycaps with the wooting
Aside from the obvious side effect of the LEDs not shining as bright? No
Are there any 3rd party USB cable makes that have been proven to work 100% with this keyboard?
If there is - and people have been sharing it, I'd imagine there's a list in #🪛│modding_faq
Hello everyone. Will orders from Hong Kong to Taiwan not be delivered this month?
I ordered since nov 2024, from EU walvis 3 batch, still stuck in fedex and keeps delaying for over 1 week now
Access and edit your orders, connect your discord, and manage your Wooting account.
Small image dump of my 80HE unboxing. I’ll do a post in #1070668460905988106 soon™️
It's slightly heavier than expected
yeah, the wrist rest could be nicer
but its still great, and as fancy as my previous razer wrist rest was after 2 years it started peeling
aint nothing gonna fuck up this wooting wrist rest
I like to use a mouse wrist rest from time-to-time and I've only got a Razer cloth one.
Would be nice to get a matching mouse wrist rest.
get a deltahub carpio
Is there any channel here that has a thread about profiles for games?
Delivery date is always delayed😞

Looks good, I'll bookmark and take a proper look later.
They're packing as fast as they can. 🙂
On the bright side, it can be used as a weapon
Ehh, idk, you wave that thing around and it wobbles like a grampa with ed
😂
It would cause some serious damage if you slap them right on their cheek with it though
I just seen the words “wrist rest” and thought I might as well get it because I need a new one, now I have a weapon
Nah, would hurt like hell but that's about it
soo clear
🥲🥲
Glad to see it delivered without issue
how long dose it take to deliver
It tells you during checkout before you purchase, and afterwards at
https://hub.wooting.io
Access and edit your orders, connect your discord, and manage your Wooting account.
alright so this thing sounds like 500x better than my razer blackwidow v3 huntsman mini
why were people complaining about the sound lol
I have weird question, I have socd on on my 'A' and 'D' keys. I play Valorant and I dont know how to use it properly with strafing and shooting. I suppose to strafe left right and stop for a moment for shoot and then strafe for example left again or should I strafe left,right and for my next 'A' press for left shoot at the time i press the 'A' button ? (Is SOCD on changing character move diredction have 100% accuracy in val or should I stop as well as it is turned off?)
cool, I get to isolate the 8k polling mouse and the 8k polling keyboard and they are both CPU direct connections
I felt the same way, it’s much better than anything else I’ve used
seeing that black wrist rest irl with the 80he looks great. I went with the white one myself to make a bit of contrast (and easter egg to zebra gang)
hi guys one question it looks like that my wooting always disconnecting, it still works when i hear the sound but i tested remove the headset and the mouse but when i removed the keyboard the sound dont came anymore does it need to be connected with usb c on the mainboard? its connected with usb on usb 3.2 rn
does anyone know? got the 80he and chatgpd said recommended is usb c on the 80he idk
The type of USB port does not matter.
What does matter is that the USB port gets enough power. Use the provided cable. Consider trying a different port, avoiding USB hubs, and if necessary reducing LED brightness to reduce power use
i use the wooting kable and its on a usb 3.2 gen 1 on my motherboard, yesterday there was nothing, now today rn playing games and always the sound comes
might just perma 0.1mm cause it's really not that bad or sensitive
even on the L45s
well I'm out of here, gonna go test in games
You need to check JST cable inside the keyboard
its probably loose, causing your keyboard to constantly reconnect
what is JST Cable? i using the cable which was with the keyboard
i am testing rn it could also be my headset or mouse but wdym with JST cable
he's talking about this:
he is saying it could be loose and that's the cause of your weird connections
@median beacon https://www.youtube.com/watch?v=LNa5wuqiFVY
This tutorial shows you how to assemble your Wooting 80HE module in one of our compatible cases.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our p...
but when i hear the sound keyboard working normaly
here is a video you can see a cable that is conencted to the pcb and the case try to reseat it
yea you need to check that cable
when it disconnect it also should not work for a few seconds
follow this video that GPster posted
i did not have this issue while i was using my 80he and i think i used my 80he for 2 months
Yea the reviews seem to be positive
oh dang, I will be on the lookout for this
some users had that issue with 8k polling, with previous firmware it was fixed for most
yup exactly like shafie says
only small % of users had this issue
but for me i never had the issue while using the 80he
same
even old firmware
never had issues with 8k before or after firmware
i tested remove headset and mouse its the keyboard i think, is my keyboard broken?
nope me neither i was statisfied the the 80he untill i stumbled a little bit deeper into this hobby and then i wanted to costumize more haha
you really have to check the cable
I told you already, you need to unscrew top case and check this cable inside the keyboard
make sure it sits properly in the connector
This one just seems like a one off thing
also @median beacon is it when u type on the keyboard on just randomly even whitout doing anything ?
he might have been unlucky
with every manufacturor there are gonna be some faulty products out of the hundreds of thousands they produce
yesterday i was just chilling watching youtube and stuff nothing rn my game is open in the background but i dont play rn and it comes like every 3-4-5 minutes
wootings failure rate is really low i dont know exactly how low tho
and i am scared to break something, i waited 5 months dont want to wait 5 months or more again
As for these I’ve seen a lot of reviews like this on multiple of their keyboards
you cant break anything
@austere finchbro why are u posting here that photos?
well i also was really scared to open up my wooting 80he when i got that but i wanted to change my switches but is actually really easy and straight forward
just follow that video by wooting
there is always a chance for a defected item or something... in any way they will resolve the problem if what
after i changed my switches i had so much fun i wanted to do even more and now i ended up with a fully costumized keyboard
not gonna lie that JST connector was tough to plug in, the wire felt like extra short on my module lol
and when i remove all keycaps and open it what if this cable is connected is my wooting broken than? i am feeling so bad rn i was so hyped for this
well u dont even have to remove the keycaps
and if that is the case u might wanna open a support ticket
Mine does something similar to this, it's fine with 8k disabled though
????
you need to hold pcb angled behind the case and then its easy to connect
@austere finch ??????
oh also u can try to use a different usb cable first
i dont?
i would start with tyring another usb cable and checking that jst connector and if that is all good then i would maybe try another pc if u have another at ur disposal
nope just a few screws in the back of ur keyboard open it up and u can already see the cable
even like that it was still super short
I think it’s broken I am crying rn
I watched the video
Cant type N I Write with my phone
do u have another pc or laptop ?
No only mine
ok then i still suggest opening the keyboard and checking the cable if it properly plugged in
it is only 7 screws and u have acces to the cable
now i can write the n again on the wooting its not working how it should
okey i am gonne open it rn if i dont have to remove keycaps like you said
are u on latest firmware ?
Yes Downloaded the latent v5 beta
so u downloaded the software but did u also update the keyboard itself ?
It does automaticly when I downloaded the Software
oh ok yeah open the keyboard and check the cable then
i wish u good luck it is not hard
Can I send a Photo here when it’s Open?
Bc I don’t really know anything on Keyboard with this
This tutorial shows you how to assemble your Wooting 80HE module in one of our compatible cases.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our p...
follow this video
yes this is the video i send earlier really helpfull
I removed screws but wait how can i hear the Sound if the Keyboard is unplugged
I got the Sound rn again the bluetooth disconnect Sound
wooting does not use bluetooth ?
It’s unplugged don’t got a wireless usb adapter like my Logitech g pro superlight
Just the cable
so it is unplugged and u had the sound while it was unplugged ?
But than it don’t Make Sense that it’s the Keyboard if it’s unplugged but before I wasnt Able to press n for a few seconds also weird
Yep
well then it is definitly not ur keyboard if u had the sound while the board was unplugged and for the n key was it after u just replugged ur keyboard ?
No the n key was so random idk why it was
@lime falcon do u maybe know why this might be, also the sound thing is not from the keyboard caust when the board was unplugged the necz still had the sound but the person also had the n key not woring and i am wondering what could cause it ?
i dont know exactly why the n key was not working but maybe shafie knows
i was thinking after replulling maybe it was callibrating but u did not unplug and replug while it happened so that could not be it
are u using the wooting right now ?
yeah cause the sound is deffinitly not from the wooting
but try to test all ur keys after replugging
I don’t have to press the screws do much in or because when I removed they were just a Little in not hard idk if I Worte it good in English
good enough for me to understand 😜 nah dont screw them in to tight
Okey I don’t screwed Them tight just a screwed a bit
ok good
now i plugged it in bc i was tabbed ingame switched to discord unplugged and plugged in again and n worked
idk what it was
well it might be fixed now
but now when i typing nothing dont work
Oh sry wrote wrong i mean I am typing and all work Nothing don’t work
oh so that is good
well if i was you i would just enjoy my keyboard for now and search what other things could make the bleutooth disconnect sound
did you connect this cable? @median beacon
the board was unplugged and he still had the sound so it was not the board
Realisticly it cant be the Keyboard when I unplugged it and removed the screws i heard the Sound again
what do you have connected to ur pc instead of keyboard mouse and headset ?
Yep These 3 things
I am gonna Check bluetooth Adapter Update bc my motherboard got Bluetooth and wifi
Hm Like always saying no update
Do you have anything connected with blietooth ?
No my Mouse is working Wireless with the Adapter who is Connected with the cable to the pc
@median beacon go in windows settings and search for devices
then monitor what is getting disconnected
You mean bluetooth and devices tab in Settings?
Yeah might be that
But if the Monitor disconnect it would get Black for a few seconds
no i dont mean that monitor is getting disconnected 😆
i mean look what is getting disconnected in devices
Ah I know I checked that the wirst time in System Control but there shows always this clock when the sound comes, maybe if it comes again I Show you but Nothing disapears
See but rn there is no Sound, I restarted pc but the Clock is there for a few secs only
I am Right back
I also think it have a few Problems but I also tested it I disconnected it and also the Adapter in the motherboard for Wireless and connected my Air Pods it still came it’s so weird
I am now Check if it’s Home again After pc restart Makes no Sense to me
how do I get the wooting 80HE role
is it the order linking thing
the discord integration
Through discord linking and the order needs to be one that was placed during the founders campaign
ShouldIBuyTheL45SwitchesWhenMyKeyboardArrivesInMidMarch(sorryMySpacebarIsBroken)
OrShouldIStayAtTheL60Switches
Either or is fine, just personal preference
RIP space bar
hi i will receive my wooting 80he and i don't know if someone can give me the best setting for that ?
Dont cross-post the same question. The best settings are ones you find either through #🌈│wootabase_profiles or whatever you make yourself and find good
okay thx
I'm on L45s and they don't feel light at all
well at least for regular typing
for gaming I might end up pressing my D key randomly when I don't mean to
IThinkImGoingToStayAtTheL60sForTheBeginnigAndThenSwitchOnTheL45s
80he
i love the 80he but these keycaps suck 😭
What’s better 60he or 80?
objectively the 80he
Ordered on 16th came today n ready to go
80he comes with the v2 lekkers and it has more polling rate
I ordered the 80he in uk how long do you think it will take
and it's their latest product so they learned a lot from 60he
Thanks a lot
no idea
Yo pls can you check dm
got it, my bad
took a month
but im na
Lekker or jade switches?
i got jade and its going pretty good at this moment
and it came pretty quick to
Hi guys is this real thar high pulling rate may cause fps drop ? I got 8k mouse and i’m getting wooting 80he beforemarch
mouse yes, keyboard not sure
mouse yes kb not rly
depends if ur cpu dogshit
got ryzen 7 5700X so idk
I ordered mine on Nov 26th and still haven't gotten mine yet
Damn. I just saw it stock. The prebuilt zinc. N it came so fast with free expedited shipping. If u looked in shipping faq. Spend certain amount it comes free if available
Which batch are you and where are you from? I ordered few days before u
I wonder when white 80 zinc V2 will be finished
Ordered mines September 10, it’s about to be 6 months. October 17 when we got reminded of the delay, it’s been 4 months since then.
Starting to get worried of the progression
The delay stated 2-3 months, so I’m not really sure what’s going on
Become PCR transparent enjoyer
Not now, it’s about to be half a year already😭
Also ordered mines around that time. Genuinely think we deserve an update monthly basis just because it is indeed pass the time they stated it will be ready. We will just have to play the waiting game, and hope it releases soon...
I agree with you with the monthly update bare minimum considering it passed the suggested time. Well let’s just hope the best I suppose.
Soon to be 6 months is quite absurd to even think about it however.
haha it really is!
Yeah 6 months a long time
I just like transparent plastic, my mouse has it, my monitor has it now my keyboard has it
Us V2 owners just been suffering the longest
I respect the wait for the white case build for whiteout builds. I just got my 80he first wooting ever. Got black zinc I have dark setup. It’s a different beast
Ohh congrats on your first! You’ve made the right company call!
why does my 80he shutsdown randomly
Using generic USB C cable or one that came with keyboard? Connected to unpowered usb hub or directly to computer?
direct and the one included
also sometimes it's detecting a slightly pressed key, like rn
im not even pressing anything wtf
it shutdown again bruh
I didn’t use the wire that came with the board. But I had similar wire from Corsair from k70 max box. I had one but it died 1 key light died went to Best Buy n got credit n got Astros
okay its triggering different keys now lmao
Hmm maybe the actuation is too low. I had a case on k70 max n k70 pro til they updated it to where it goes .1 I tried it very low it was lighting up the whole board in pressed keys. I figured out even wind or current hitting the board will set it off. That’s how sensitive HE keyboards are. Maybe are setting the keys getting pressed on higher actuation. Might have wind coming in or something on the board in certain way
There’s a rgb timer shutoff mode. Adventurer around woolity you’ll find it
If I cancel my wooting 80he order how long does it take for the refund
A few days to a couple of weeks. Depends on how fast banks are
60he or 80he ?
I received my wooting two days ago and it’s a beauty
Is it normal that I can jiggle the usb-c stock cable on the zinc case when it’s plugged in (not a really secure fit) ?
Has anyone else experienced the color on their zinc alloy fading or peeling off over time?
Did you bonk something with it?
nope
It looks like weird issue
First time i'am seeing
Do you have high air humidity and temp?
no
Looks like the ano process failed somehow. That's a warranty issue. 🙂
Pick the category and issue you need help with, and we'll guide you through the process.
damn that sucks
Man, may I ask what are those keycaps?
PBTfans Crosshair
Thanks bro
Iirc mark said they traced it back to a specific early batch that has had this happen due to a mistake in the anodizing, but yeah make a support ticket to get it replaced since it’s under warranty anyway
these mfs are hella cheap wth lol
NA Whale 2
hopefully it will arrive within a month at least lol
just go the wooting 80he and played my first game of league, I pressed some key combination that made all other keys stop working, and only the tab key was glowing, I checked wootility afterwards and it seemed like the default key layout were all of the functions key, how do I change it?
Not got mine yet but that certainly doesn’t sound right
go in remap and click default
then save
I did that afterwards, but trying to figure out how this happend, because it was during a game
Weird
could you show a full picture of ur wooting with the keycaps , i want to get them aswell im not sure tho
ty
yeah its normal for wooting. Usb's of all 80he's are like that
Not enjoying the feedback in terms of the quality of these keyboards, considering the price!
Mine is not like that
@low tokenhow is it possible? turn the ucb c cable to the keyboard and move it up and down..it dosnt move at all!?
It dosent
impossible
thats what i was trying to say
My 80he is pristine in every way
it's not just the rgb that shutsdown, it's the whole keyboard
Try a different USB port? Make sure your Windows isn't set to shut down USB devices if they are "standby" for too long?
check jst cable
tried every port
I ordered mine in June ;-;
I think my 80he is fucked, switched to 1k still seems it’s not getting enough power
Does anyone know how to confirm that wooting80he is authentic?
wootility
You mean if I can use wootility that means it is authentic?
thank you so much
you didnt buy from wooting or what?
I bought it from a private seller
Because I want to use the modified one directly
like keycap
If I buy the Plastic 80he can I buy the alloy case to replace it or is it not possible
you can buy zinc alloy separately and swap it yourself
I have already order the plastic 80he so if I buy alloy case can I swap it? For a zinc alloy?
Yes, you just disassemble your pcr 80he and move module in zinc
Okay thanks
wooting has video how to assemble it
Okay thx again
how long does it take usually to get out of the Order is being prepared to ship to you stage
it's been like this for 3 days now what are they preparing 😭
It's... it's a sunday.
Your order is in the queue to be packed - during regular business hours (alongside a bunch of other orders)
Is CS still facing the problem of a large number of emails? Because I responded to the support email and received no response for two days 
Imagine not working on Sundays. Couldn’t be me 😢
un unnn understandable
Hey, bit of a dumb question I know but I assume the 80HE comes prebuilt?
Unless you buy the module? Yes. Though for ISO/JIS the keycaps are self apply.
I think I figured out what the issue is with my keyboard, sometimes when I'm pressing the key past the actuation point, it stops registering the key, is there a setting that could cause this or is it just an issue with the keyboard itself?
It doesn't matter if rapid trigger is enabled/disabled, 8k polling is enabled/disabled and I've tried factory resetting it and just using the default profile too
day #62725 without white zinc drops, im starting to believe its just all in my head now. The crew cant go another week without even a sighting, i can sense the mutiny in their eyes... planning behind my back. Im forced to sleep with a wooting alternative under my pillow to ward them off if they dare come while im sleeping.
this is poetry at this point can i get a special role >.<
Im tryna put the 80he in the gt80 case is there a way I can buy it without a case?
don't think there is
Sure.
what does this mean lol
Yes
You'll want to get the 80he module then. You'll need to get compatible switches and a set of keycaps though if you go this route.
I already got gateron jade pros n I got sum keycaps
Then just need the module!
someone did a 3d case print for the 80he iirc
Not yet
oh thought someone did
My problem is I dont want the cheaper plastic cases and the zinc cases wouldnt look nice with my setup and keycaps
I got these keycaps
but im a lil impatient and dont want to wait till may for the gt80
I printed one out of carbon fiber nylon the other day. Sounds horrendous though so I’m keeping it in the zinc

Just used the 3d file from online
Get zinc alloy raw and paint it your self
im a fuck it up lmaooo
Let us hear it
Go to a gun shop that does cerekoting.
Might end up going with the 60he but I like the form factor of the 80he better
or maybe the tiger lite gaming
what do you guys think about that?
@sage cedar Go with what u like
No one can make up your mind.
what I like is a 75% build but I want jade pros and I dont want anything shit quality
As someone that bought 60% keyboards and regret it after missing the F keys and the arrow keys, it's just depends on what you prefer
If you want arrow keys and function keys, 80HE is the way to go
I dont really care about the f keys I just want the arrow keys
If you don't care then 60% would probably be what you are after
I love having the arrow keys back and not needing to press a function key just to use them
Yeah I would go with the 80he but I dont like the color options avalible to me
Do you swap the caps lock with Fn? Noticed that’s pretty popular with those running 60%
Nah, before this I was using the razer huntsman mini and the FN key is at the bottom right of the keyboard
I wish I thought of that though
Since I literally never use the caps lock key, switching it for FN would have been a lot better
Finally it is here!!! 🙂
Am I crazy or is it fair to compare the wooting to a topre silent switch? This 80HE really does feel pretty similar to my realforce topre
sort of a membrane keyboard feel?
yea lekkers kind of feel like that because of open bottom
no wonder I like it so much
3.5mm travel switches >>
it's crazy before I bought I was stuck on L45 vs L60, but L45 is legit perfect for typing, it's not like I am making a ton of issues and I can still type at 130+

