#🌟│wooting80he
1 messages · Page 288 of 1
YEAH BOYYY
finally at warehouse
im pushing fairly hard to the point its almost forcing it in, it doesnt wanna go in
the puller works on the other keys just not ones near the cover
Maybe the paint on your case is a mm thicker? Not sure. Never had that issue with any keys. Pulled the entire keyboard clean of keycaps several times on my white zinc.
it dont
I appericate the help! I'll try to figure it out 😔
im sad
what batch ?
Nordic
How do I get the role "Walvis"? I connected the Discord in their Website but didn't got the role.
If you have an order with that batch there, it should apply if you refresh
Do you guys notice in games like valorant fn changes between 1000hz and 8000hz polling?
Is there a place w/ videos to put it toghether? I custom ordered
Wooting YT has videos to show the process
idk if i should buy 60HE+ or 80HE for games like valorant and fortnite cuz i dont even need more keys i mean F1-12 keys . I have now 60% keyboard
Buy both
no money lol
Tough to buy either then
If you have a 60% already and it isn't doing it for you, seems like an easy decision to get the 80
I mean 60% its very good for me but wooting has 8k pooling rate thats why im asking its worth to go for wooting 80he with more keys i dont need instead of 60he+
I'm afraid that 80he will be too big and I won't even use the F1-12 and arrow keys
I have 60% and it is enough for me
You don’t really need F keys for FPS games, mostly if you play a wide swath of games that could use it (MMOs for example)
yea i dont need them
mouse? yes, kb? no
arrow keys tho
so i should take 60+he instead of 80he
cuz i dont need more keys and i wont see changes between 1k-8k pooling
ill order today but my head is steaming
It’s a ‘nice to have’, but not worth getting just for that
As a TKL enjoyer, that’s my preferred size and 8k polling is a rather small candied cherry on top
Ok so i think ill order just 60he+ module and buy seperetly geon raw he switches and custom keycaps
Ty for help u really good buy @coarse crest

sob
You helped me a lot
I hope you enjoy your board 🙂
For 80HE i need to wait more r? than for 60he+
60HE+ will be a decently shorter wait time than 80
I’ve heard some ppl say it can take 1-3 weeks but it should be a much faster shipping experience
Well, what exactly is 80HE better than 60HE+ in games like fortnite csgo and valorant only 8k pooling and I think which is just a small advantage just want to ask ending question before decide to buy 60 instead of 80
Ok nice !
Literally layout preference
And functionality of F keys and arrows with different internal specs for sound etc
3 weeks of owning the 80he,
And all I can say is

Agreed
exactly plus wooting 60he+ has aluminum and 80he plastic (I wanted to buy plastic) so it's even better for me because for almost the same price I will have better material
How do I get I has wooting role?
The alumaze cases look nice, I originally wanted 80HE alumaze but the zinc won me over
You just became a founder, congrats! 🥳 But you might be left wondering how does one claim the actual Discord roles? Follow along
Join our Discord: https://wooting.io/discord
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social...
I wanted to fully deck out my 80he until I realized in total it would be like $250
So I just decided it’d be better to just change the keycap set and start saving for that aluminum case
It’s definitely worth to pimp it out to your liking
Good to see you Shiba, glad you’re enjoying it!
Very nice experience once you have it perfect 
For sure, its just a not now thing for me because im broke lmao
I feel, my IEMs broke so now I have to get new ones
Gt-80 case looks so good
You should have some time to save for it 🙂
Don’t forget to save for retirement as well
Also true
My ps5 headphones are in shambles, they arent bad at all sound wise the problem is that they used fucking glue
I didnt realize it until it was too late
(i used them to play a shit ton for beat saber)
$100 headphones btw 😭😭😭
The trick for headphones is to buy a set of Senn HD600 and keep them for 20 years. At least that’s worked well for me.
Yeah for headphones I’ve found you get what you pay for most times
minimun performance difference
Yeah it’s a tough cycle since buying cheap usually means having to replace them
u probably wouldnt even notice
I’d try giving IEMs a shot, there’s a lot of budget friendly options for gaming
IEM’s are in ear right?
Ty
In ear monitors, iem
For like $40 more I couldve gotten the headphones I wanted that actually wouldve lasted 😭😭
Philips X2HR
IEMs can be nice but they need detachable and standardized interface cables if you’re hoping to keep them long term
The cable will always, eventually, fail
are you with the default 80he stabilizers now jed?
Not big on in ear headphones, not that they’re bad at just for the fact my ears make a lot of earwax
Ive always preferred headphones with a detachable cable
No matter how good the headphones maybe if they’re not detachable I dont want them
dude putting this pcb cable on in terrible expierence
It isn’t great
Yeah, they’re basically just ‘fancy’ earbuds
Current headphones btw @winter nebula @coarse crest
Those poor things did their best, but their best wasn’t good enough
Only reason I still use them is because all the other heaphones I could find in my home aren’t as good
Im surprised my cures headphones are still standing
oof those pads are gone gone
Ngl to ya’ll tho I wasted my money on a keycap set and an xxl Artisan pad, didnt think this through 😭😭
If you like headphones more sennheisers wouldn’t be a bad call
Nah artisan pads goated
Im getting the hayate otsu v2 along with some “saphire”skates for my Lamzu Atlantis mini 4k
Im gonna be rocking the best comp setup and ever and still play like ass!! 🗣️🔥🔥🔥
Are the sapphire skates glass by chance?
100%
Those could ruin your pad so I’d advise for others
synthetic sapphires
For cloth usually you want other PTFE ones
Seriously?
The Hayate otsu is a nice control pad tho
Yeh what else would I mean lmao
I’d recommend either Jade skates for speed or obsidians if you want more control @worn compass
boardzy has a vid on real sapphire skates
Unless you’re talking about dot skates
Ive done my research they seem expensive
50 bucks for 4 dots
Nah I have a bunch of knight v2 stocked up from past sales so I use them for my boards
This is talking about the image you sent earlier right?
Oh nah
These sound perfect for me
I didnt even realize, I just got them for the durability
Ok, wtf is a diamond pad. Yk what I dont even wanna know. Ive gone far enough into this rabbit hole
how has this channel not been spammed with this https://www.youtube.com/watch?v=sq5Yr0LWW8s
It took a bit of time, but we finally managed to pull off something great!
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE https://w...
people are crashing out cause its friday
ah
makes sense
must be all the f5 pressing they do on the hub that made them tired

who knows maybe. not something we're working on atm
Was just wondering since gt-80 case has an option for it and assuming there might be a trend with other 3rd party 80he cases also including that option
Is it possible to bind a program to a key?
Can you link the case?
Thanks
im not actually sure if they can do 8 and 12
🤷♂️
Could be due to how copyright laws are in different countries
Tbh I was more or less thinking of getting a custom strap from ali express whenever I do buy the gt-80 case
The case looks pretty solid though, not really my cup if tea ngl
I really wanna turn my 80 into a sleeper build and was afraid that the led bar was gonna get in the way of it but the Gt-80 case makes it look so sleek
While still having its proper function visible
is there a list of current custom 80HE case options?
Tbh all Ik rn is the GT-80 and Bone80
And theres that too
or down the page here https://wooting.io/wooting-80he
I see zero custom cases there
Tbh all the metal cases we have rn are really similarly priced so I’d say it’s all up to preference
do you have a link for the bone80? I tried to google but was not successful heh
GT-80 Case It has been a year since the release of the Tofu60 Redux case, and we have received an abundance of positive feedback from our users. Following the launch of the Wooting 80HE by the Wooting team, an increasing number of users have inquired about a compatible case. In response to this demand, our team is exci
there are custom cases currently released by other sellers
they are not on the website obvs
Lemme get some screenshots
yea that's what I meant, not the stock ones
thank you! I have the GT-80 on preorder but would love to see what other options have released since then
sorry I didnt read the custom word
apologies
no worries
yeah we've seen this in the company too
the BONE80 cases
the pastel colours are pretty
I have a solution: 
I agree
awesome. that is pretty dang clean. not disappointed I went with the gt-80 though, it's also really good
thank you for the video that was nice
Did you get it with or without the badge? I initially really disliked the badge at first but it kinda grew on me so Im kinda stumped on that decision, dont plan on buying the gt-80 anytime soon but ik for a fact its the case I’ll be getting in the future
without! I was having problems deciding but I figured if there's dust in the badge hole it'll be annoying to get out
so I went for practical over looks, was 50/50 anyway
It was kinda the same with led bar, well I didnt despise it like I did the badge but it felt off, grew on me tho due to features and stuff
Omg I never thought of that
You’re so right
even worse if you eat a celebratory rank-up cookie and crumbs get in there
Yeah I can already see myself picking the gunk out with a tooth pick 😭
Im going without the badge
I pictured exactly that too
ok I must go, ty for the video again
No problem
They will ask tomorrow 
just ordered the bone 80 👍 , lets see how it is compared to zinc when it arrives
Same mine got delayed
Yeah
It finaly came
How is it so dirt cheap for you?
Can u share the link in private?
I wanted for Christmas tho
what lighting effect did you do for this?
Swirl
white v2 zinc case coming earlier than expected? that's exciting!
big w
btw if i buy a 80 he in iso de layout rn, when can i expect my delivery? is it basically the same as the batch arriving date (mid march) or way later?
The checkout will tell you.
I will tell you
What are all the coming case options?
so far gt80 and bone80
hold up, which are louder ttc magneto rgb, geon raw, or lekker v2
Send
So pretty! Keycaps? :3
glorious polychroma
polychroma are made of POM yeah?
PC i think
not sure
i have similar ones that are definitely PC
those keycaps + frost are great, i have the same on my 80HE as well as jade max for that transparency :D
no issues with sticky switches?
i have no idea what you mean so I guess not?
had this issue and switched to jade pro :c - loved the sound tho
my jade maxes are very sticky, tried lubing them with 205G0
what is sticky
yeah same loved the sound
like the switch kinda stepped when doing up and down sorta
pain in the ass to remove keycaps from the max stems though holy crap
they are still having that issue huh
oh yes 😄
to remove the keycaps i have to remove the whole switch and then pry it out
Mine weren’t super sticky (it was kinda there in the background), but they were not very smooth
that really hurt my fingers
How do you remove the switch w/out removing the cap though 😱
Definitely not close to pros tho which is unfortunate
you use a keycap puller and the switch comes attached
lawd
i couldnt care less about the typing if im totally honest lmao
i did it for the rgb
if it used the regular POM stem it woukd have probably been fine
For the fps
so real bro
I wish I went pros off rip tho would’ve saved me a lot of time 😭
hi mango, have you been eating pc parts again
Nooo, what makes you think that? 
nothing in particular just checking in 👀
Honestly eating switch stems is a great way to clean our your lower digestive tract
Subscribe for more health info
Glad I chose the Lekker. Will replace them with RAW as soon my case gets shipped from kbd fans
Not impossible, just a bit of a pain.
are maxes easy to remove? every switch except jade pros are pain in the ass
gateron cooked
too easy
yea same as pros then
Are geon raw easy or nah?
i almost gave up while removing geon raws, rgb windows were flying left and right
geon raw is the hardest to remove
Oh
Why?
I was considering getting them over jade pros because I think I prefer deeper sound like satisfying not clacks
i think theyre slightly bigger
Ahhh ok
yea raws are definitely more clacky
pros are cleaner and a bit deeper than raws
rgb is cooked tho
Wait what I thought raw is less clacky
What’s wrong with the rgb
it has green rgb window and it messes up rgb
makes some colors darker
blue and green are fine
green?
red purple pink are darker
it looks white in the pictures
nope its green
oh i thought you were taking about the geom
nah, raws are fine with rgb. i was talking about jade pros
I believe I’ll probs go with raws
How do they fit and they hard to install for a newbie (legit first time, have to take out lekkers asw)
What’s that
jade pro vs raw
yes
Ty
Which one is first
Raw HE switches are super nice :)
can i use cherry mx stem keycaps on the 80he ?
Yes.
yes
They’re both clacky switches, just with some pitch differences
I like the sound so idk why I thought I wanted non clacky
I’ll listen to the wooting comparison and see
Sometimes finding what you want takes some time and is hard to explain so I get it 🙏🏻
Thanks
which is louder jades or ttc magnetos
magneto
Magnetos by a mile
so jades are significantly quieter?
how abt geon raws, i saw u guys saying build quality is mid though
thoughts on magnetic foxes too?
i appreciate the recording, I just ordered jade pros for my january delivery 80he, sounds really good. was curious on the sound vs the regular jades I have in my 60he
Jade pros have some volume to them, magnetos are just that much louder and plasticky clack sounding stock
RAWs are good, similar to Jade pros with some differences. Haven’t heard the foxes.
Pros have a longer spring and tighter tolerances. Your jades in your 60HE will sound louder due to stock steel plate in your 60
I cannot find the bone8' does someone have pics
i linked it right under that bruh
Guys i mounted it like a few days ago
Can't say it is not the best keyboard on the planet, rtings.com just released the review and it's the actual fastest keyboard right now
💀
Does wooting have any competition? Just curious to see if theres any difference in build quality
Because i dont care about the tech stuff (8k HE etc) i just want a metal keyboard thats premium and high quality
oh yeh there's def competition at lower price points
Is there anything better in terms of this
took them long enough
like maybe that have 8k, he, rapid trigger and some form of snappy tappy
but there's always like some type of flaw
or rather compromise
No i mean
Is there a better keyboard in terms of quality and being made outta metal (ignoring things like 8k, HE and rapid trigger etc)
Just pure quality
what about wood
cause first thing that comes into mind is Keychron K2HE
trying to think of metal ones
Wood is not metal 😔
i was just thinking quality sorry
I want something heavy and premium feeling thats also high quality like the zinc alloy 80he
If it exists anyway
But dont care at all about the tech stuff
do you have plastic 80he?
No my zinc alloy 80he is still on the way
But i can cancel if theres better, since im not buying this wooting for the tech
Keychron Q1 HE only available with an aluminum case
Is it better than the zinc alloy 80he when it comes to quality?
if you ordered zinc 80he i dont see a reason to search something else
i think zinc alloy still tops it
So better ones dont exist
but aluminum is still really good
Ignoring tech like 8k HE and whatever
I only play story mode games
Its not better tho so no point in canceling my zinc one
thats the main thing of wooting lol, get some custom mx keyboard then
Cause you know how wooting is a mix between good tech and good quality, i was wondering if theres a pure quality metal keyboard out there
What main thing?
being hall effect and having insane performance, if you dont care about all that why dont you order non hall effect keyboard for less money
Thats what im asking right now?
Lol
But its either that nobody knows or it doesn’t exist
Im asking for a metal keyboard thats higher quality than the zinc alloy (ignoring tech stuff)
If it exists
there's a lot of custom keyboards that are high quality, most of them don't come pre-assembled though
Damn there arent any good pre assembled ones?
So the zinc alloy 80he is my best option for my criteria
Thats why i went with the 80he i couldnt find a single metal keyboard
Epomaker CIDOO C75 and MelGeek Made84 Pro are also good keyboards, but once again aluminum
consensus overall Zinc > Aluminum
so maybe you did make the best decision possible @static sky
Are they more reliable and higher quality
I guess so 
it's close but not going beyond zinc 80he
I guess theres no market for what im asking for, all people care about is performance
Rip
Does anybody know if there is any keypcaps that are translucent and MOA? i cant fine any:(
there's a market you just have to look in the right places
Well i thought asking here was the right place
Since people already know alot about keyboards while i dont know anything
I tried looking before buying the 80he and couldn’t find anything
Is this for me or the other person
theres also r/mechmarket if you cant find what you're looking for online, ppl got entire GMK catalogues and other caps there too
a lot of these websites linked have pre-assembled metal keyboards
Custom Keyboard Kits contain most of the components needed to build a full, mechanical keyboard excluding the switches and keycaps. Divinikey is proud to sell a large offering of quality custom keyboard kits and differing layouts. Layouts include 60%, 65%, 75%, TKL 80%, and many more. Mounting styles range drastically
But are any of them better than the zinc alloy 80he (in terms of build quality and reliability)
Not performance*^
well no they are a lot less volume products and aren't going to come with 4 year warranty
Well then theres no point lol
and support is probably pretty questionable for a lot of them
Why would I downgrade im trying to upgrade (in terms of quality only)
I guess it really doesnt exist
idk if any keyboard company other then wooting has a warranty that long to be fair
Well warranty ≠ quality
Im asking about reliability and build quality, not warranty or performance
yeh i genuinely cant find anything else (even with wooting bias set aside)
reliability and warranty go hand in hand
That’s company reliability, not product reliability
if you have faith you have a good product you offer a long warranty to back it up
Thanks for trying
mb g ;-; just wanted to see every option out there
but everything falls slightly short
like even zinc alloy options are out there, but non shine through key caps, 1 year warranty and you have to assemble it yourself? yeh not for you
True i dont want anything like that
i bought the prebuilt zinc alloy ansi myself so i understand where you're coming from
Nuphy field 75
Im not surprised tho cause people prioritize performance in the end so that’s what companies focus on
Im just a rare case
Yes that's what i said, faster than the fastest mouse clicks too ( op1 8k at 0.6 ms)
nah, afaik op1 8k is still faster with gx mode
0.6 is without it
Yeah im like that with everything, I prioritize build quality, reliability and the premium feel of products vs performance because i dont play competitive games
Thats why i love metal, even my pc fans are metal
Theyre heavy and nice
all good most of my friends are like that too. I think it's nice that it's there in case you want. You dont need to make a rapid trigger profile and can just keep it casual
and from what ive seen in chat if paint chips or peels off Mark said it's covered by warranty
so at least some stuff to go with the quality
Chips and peels are for the white one only i thought? Since black isnt painted
Am i wrong 
no ive seen rare cases of the black ansi
Damn ive been lied to
having it peeled off
Tested with it, it is 0.6(looks like)
granted very very very few cases of it
mark said only 5 units out of how much made
its without gx mode
So ill be good then
with gx mode op1 has 0.1ms click latency
yep! we both have the same thing so if anything happens ill put my thoughts here
Okay thank you for the help
yeh ofc!!!
I didn’t get it yet hopefully soon
ik i have the exact same one but that photo is sick
G Pro superlight clearly is the best mouse
superlight clears your mouse
can only imagine how good the v1 and v2 white zinc owners are feeling about how their keyboard looks
60g is very light
60g superlight gaming mouse
you're right it does clear the VV3
yes
Damn finalmouse really is garbage for the price huh
its out
My FM gets here on monday
im on a razer mouse but excluding superlight, are sora and fm mouses really that good?
no
Im going from a fantech aria xd7 to a fm ulx comp tho
So hopefully its a noticeable difference otherwise im returning
ooo gotcha
damn straight
based
raiden supremacy
was thinking about getting custom raiden keycaps down the road
idk about top 1%
G502 best mouse of all time no question(for me).
I love all the side buttons
but ik she can never leave my party for the last 3 years rofl
unless abyss stuff then no choice.....
my raiden obliterates everything, i have c3r1
it's crazy how even c2 is enough
you can even have "the catch" and you're pre much set
why does nobody mention wlmouse
that infinite scroll wheel though
their shit is so good
this is my first time hearing about it (im so sorry)
well just to get an idea, their smallest mouse is 34g magnesium
beastx is tempting
and while it is quite small its not like the z3k or whatever its called from that really long name company where its like half a mouse
im viper v3 enjoyer
its a normal mouse shape
HOLY FK those products look so nice
you missed out on the fabulous beasts collab version of beast x 8k, im so happy i got to get one
their designs are goated, even their he keyboard looks so nice
nah i blame myself for being so narrow minded i deserve to miss out on that
will they bring them back or its gone😭
YOOOOOOOO
i think its gone 😢
........
im even happier tho that im gon get my 80he fairly soon
def caught my eye
i like this but i guess its gone forever😭
FK
that was the one i was gonna get but i decided on the pink
yea idk if theyre bringing it back i think it was a one time thing
ye
beast x 8k for the fabulous beasts version
its 8k polling too forgot to mention that
the mini was what i was gonna get but boardzy said its like actually tiny
speaking of 80he, are there any good pudding keycaps that arent prismcaps or like the big brand ones
cuz i have prismcaps and theyre okay but i want something different for my 80he
Steelseries
prismcaps are the steelseries ones
I am dumb, let’s move on
i might just get a not pudding but really cool keycap set from kbdfans or something
omfg theres a metal 80he case that you can preorder
yea
i might have to cop that
its so cool
its expensive tho $120
how is yours so clean 😭 i gotta use the grip tape so i wont dirty the mouse, i hv the same mouse but the red version
i clean it every single time i use it just with my fingernails
that's commitment
dayum
are you using their ptfe skates?
yep
but ive considered switching to something else
its my prized possession i want it sparkling
but i was an idiot and bumped it into my keyboard so theres some super small scratches
theyre hard af to see but it still pisses me off
oh no
being as perfect as possible only for it to have a slight deviation that angers you
yeh im the same
i'm having issues with my shipping how can i get help please?
What issue
my carrier "UPS" have the keyboard in their facility around 3 hours drive from where I live, and it's been 3 days like this without any update. and now on the tracking link it says "Estimated delivery
Information not available.
We’re sorry for the inconvenience. If you are the sender, please check with the receiver to confirm delivery. Otherwise, you may start a claim to provide a resolution.
"
did you give ups a call?
yes they don't respond
would anyone have a recommendation on a all in one lube station?
and if i get gateron ks-20u thier factory lubed will that make my job way harder? hand lubing them i mean harder?
don't think anything is out yet for it, kbdfans gt-80 is out on preorder, and theres another called aim bone80 from aliexpress, but haven't seen anyone with it
Bone80?
Ok just read their segment on click latency
The Endgame Gear OP1 8k has exceptionally low and consistent click latency, providing an extremely responsive in-game experience for gaming in any genre.
The above measurements are on the latest stable firmware version as of the time of writing (v1.09). We also performed supplementary testing on the newest beta firmware (v1.15) publicly available on Endgame Gear's Discord server.
On beta firmware, we recorded identical average click latency results of 0.6 ms
We tested this mouse at its maximum polling rate of 8000Hz, with SPDT settings for the left-click button set to GX Speed Mode and the Slamclick Filter off.
Gx speed mode at the end
Instead of spreading misinformation
And using even techpowerup who claims that the mouse goes to negative values
I recommend sticking to actual facts
If you use the op1 8k you shoot before even seeing the enemy,it's called trigger bot
its an interesting take on it. i preordered the gt-80 as it centers the daughter board which i prefer.
Never heard about it
yea i don't know how new it is. must be super new tho.
i hate this mouse
It is 130usd on taobao
well lets hope someone takes a chance on them 😄
This is hard
96usd for the basic, 103usd for the premium
hey im able to eventually upgrade my 80he case if i wanted too right?
bought the 80he plastic one, but ill probably upgrade the case at some point but wanted to make sure
you can
thought so and didnt see why i wouldnt, just wanted to double check. thanks
yea hopefully with how popular wooting is, some other vendors will make their own variations.
Me too, i tried it . Looks good has better specs maybe but it feels ( subjectively) worse than my vv3 pro ( modded)
Id recommend watching this video and few others that show actual click latency https://youtu.be/6pEInoAdhPU?si=4OPjYEOcCXWd_HWo
In this video I am showing you the software for OP1/OP1 RGB and the software tool for OP1 8k, as well as the click latency of OP1 8k with XLAT and LDAT.
Thanks to @shrimpintheshell for the timestamps:
0:00 Intro
0:30 OP1 RGB Software
8:40 OP1 8k Software
14:20 Kailh GX switch
18:30 Pre-soldered switch packs
26:22 Hot swap switch pack
38:00 X...
You are the one whos spreading misinformation
when did wooting remove the key depth indicator from tachyon mode?
also can I downgrade my 80he firware ?
In the latest firmware update, it was messing with tachyon mode
They removed it because you were essentially making it non tachyon mode by using that
just turn off tachyon mode if you want to use it
Bruh, that’s a 1 hour video, ain’t no one got time for that
so the next question was can downgrade the firmware?
I’ve used the Logitech pro Superlight x 2 and made the switch to wired with endgame optic 8k and I can say for a fact it’s wayyy more consistent and clicking feels much smoother, compared to a wireless, it’s never misses an input compared to the wireless one I used.
Just from experience
I think you can reset flash it if you go under troubleshooting, but why are you trying to downgrade the firmware? Is there something bugging in your current?
You dont need to watch whole video :)
The light indicator with Tachyon mode is really killing the fun for me... not this keyboard is like anyother keyboard
then disable tachyon mode
?? Just turn off tachyon mode and you can use it again
one more question can I at least change the code of the RGB to a statick -blue- and not use the preset pofiles that they have with Tachyon mode on?
tachyon mode wasnt working at all with key depth indicator enabled before
@lime falcon I swear it was working for me
no it wasn’t
You just didn’t notice the polling difference
but it was essentially making your tachyon mode be non tachyon mode
Its so weird that we’ve had multiple people request they re-enable the fake tachyon mode with key press indicator
like why would you want a fake tachyon mode that functions as non tachyon mode
you wont to use those led bar effects? disable tachyon mode
Placebo me, keyboard daddy
placebo premium
So first off you start saying that there is no speed gx mode, now you go on youtube trying to find people bCking you up because i was right when i said :" according to rtings the latency is 0.6ms"
You:" no it's without gx speed mode
Also the video you brought up is from a guys using xlat whereas rtings used a game for real test scenario
yes
is there a way to make macros for this?
Example i wanna say /hideout for poe 2 but dont know how to make a macro
not in wootility, gotta use something like autohotkey
wootamation can handle it probably
i bought it and i noticed the listing i bought from is the only one that says 1 sold lol
tried asking if its a preorder
but just get an aichatbot
V5
is the wooting80he finally out?
its been delivering to customers for a few months
It’s been 3rd batch already
It was out for months
yes but i meant like fast delivery
like the 60he, if i order it now i get it in max one week
that's what i meant broski
who knows
its once when there is left over stock
so nah
if there isn't a bunch more orders its going to be a few weeks until its more available but anything could happen
btw
hilarious oversight, if you google "How many keys does the Wooting 80HE have?" the AI Overview shows first and states that it has 83 keys, when in reality it has 84.
technically 84, 85, or 88 depends which pcba you have
ahh the different layouts? yeah I should clarify its 84 for US ANSI
What if wooting
There is a current issue where the 80he switches profile on its on when you restart your pc
Has anyone else had that?
put the profile you want at first profile
it defaults to the first profile on power up
Ohh thanks!
this also happens on the 60HE+ and UwU keypads
btw i updated my 60HE+ and it still doesnt show the scan rate on the tachyon toggle, still in ms, is this normal
just a question how long did it take you to get used to the speeds of magnetic keyboard
since im still on normal technical so
a week or so of playing daily
depends on the game i'm sure though
for tact fps you have to adjust to new strafe timings
i heard from a friend there are things i need to adjust for example space bar reaction time
since the thumb is laying on it already it might activate on its own
maybe a biased question but coming from a mechanical is there much of a difference, like can you really feel it ?
besides its more sensitive ofc
i mean thats pretty much the main difference its just faster
Huge difference if you play the games that take advantage of it
To the point where if I play on non he I feel like my character is moving in mud
Im really curious about the feeling. Hopefully it will arrive next week.
Like I´m playing fps mainly, I really hope for that feeling of a jump from 60hz to 144+++ 😄
It’s similar if not more if you play strafe heavy fps games
yes, you will never touch mech keyboards after wooting if you play comp games
like my shot timings are literally incorrect now if I play on non he keyboards because it doesn’t stop the same and I end up shooting too early
That is mainly the reason I was going for the 80he. Always felt...something is off. Hopefully my wrist won´t get crazy since I´m coming from an lowprofile keyboard 😄
Same
i wish you luck sir!
how huge of a difference will I get if I switch from a corsair k55 to a 80he e.e?
a lot more mouse space for one lol and the keys will feel great. and beautiful ASMR even if it isn't the best, compared to a membrane...its a huge difference.
ahem, how do i remove a keycap ? trying to lift them up but don't wanna damage anything by force does the wooting 80he have a specific tool that i can use ?
Yeah it comes with a pulling tool with an end for keycaps and one for switches.
Oh that's so cool
tbh i like that they are hard to lift up by hand, really well made, my previous keyboard Logitech x pro it was too easy
Can you send a pic of your keyboard?
it looks cool
Oh wow that's a vibe
yeS
Guys like for pre order they said next 2 weeks we would get reallocated to those mini batches and we would be hearing about that but it’s been about 3 weeks now and I’ve not heared anything so uh how does that work like that’s normal as in do I needs take those date stuff with grain of salt?
I just ordered one and the order has been pushed back since they are receiving a shipment of switches, it says that they are being sent in the batch "eu-bruinvis" but I cant find it in the https://wooting.io/batch-updates, where can I find batch updates for that one?
https://wooting.io/product-status?app=batch-checker
they did allocate into mini batches already
Check your order status, or see the status of current and planned batches.
Na-Whale was split into NA-Whale-1-3
and im ngl ive got no idea where i can see it then
can someone explain how i must tune rapid Trigger? release and press settings
hey, I don't understand the delivery system, if I order an 80he ansi in France it is in the eu-Walvis batch, but the batch has the status in transit?
Who here has already built an 80he?
Because I am fairly sure I have a defective unit but just to make sure trying again to fix it
it's cause there's several sku of 80he ansi
and available means not sold out yet
Feel free to post what's going on here, I don't do DMs.
Defective how?
I cannot manage to get rid of this gap
I am trying again re mounting the top but still cannot make it work
Like I said. Might be a case of broken clip hooks.
What are those I’ll check
Or was that a different guy last night.
same
#🌟│wooting80he message
Yeah not sure what more you're looking for here
Chris (aka Mansen) already suggested you reach out to support. Not gonna be different a day later.
What’s the correct channel then
you need to email them social@wooting.io
Are you trying to contact Wooting's customer service? Please use the support wizard!
https://wooting.io/support
There is no channel that can help you, reach out to support.
Already done 10 days ago
then wait
My DM's are not open, Drago...
gotta reach into his heart first
Provided to YouTube by avex trax
RAININ' IN MY HEART · MELISSA WHITE & ACE
SUPER EUROBEAT VOL.142
℗ AVEX MUSIC CREATIVE INC.
Released on: 2003-10-16
Composer: S.CASTAGNA/E.SOMENZI
Lyricist: S.CASTAGNA/E.SOMENZI
Auto-generated by YouTube.
the fact mfg is using like 15 year old eurobeat is kinda crazy
Hey guys i have a question so
I wanted to buy a iso wooting 80 he however it ships in April. What do you think of the pulsar pcmk 2 he would it be a good alternative or not if no is there another keyboard i could look at. Im searching for iso de pls help ty :))
They asked on the Wooting Discord
Yes.. was thinking about if and how im gonna reply to this as im 100% pro wooting 
id recommend asking somewhere else
preferably a place who knows more about the pulsar
Yeah, ask on the Pulsar discord for an unbiased opinion.
||ngl they would say wooting||
Ig ima just buy the 60he+
you should.... probably not buy things on a whim 😭
why is the port there
As opposed to underneath?
It is not even in center
as opposed to a sane place
like on the left or the middle
Same place as a competitor? Why would they want or need to do that?
Oh I guess common cases
IDK is that non-standard for TKL?
there are common places that people use
this just feels random
What mousepads are you guys using?
saturn pro 
just a normal deskpad
The Black SP-004 (SkyPAD 004) Glass Mouse Pad provides an unparalleled glass surface designed for high accuracy tracking, combined with a 60A silicone base for a full footprint grip. The silicate glass is micro-etched for a unique surface experience and heat treated at 680° Celsius to achieve the same structure and durability of tempered auto gl...
Skypad 4.0
White or black
Black for better speed
A cheap razor fabric pad on my sofa arm
artisan0
bcs black obviously runs faster (joke)
Black because my 80he is black
... and my desk, monitor, speakers, headphone amp/dac, controller, phone, mouse, mic interface, watch, microphone, mic arm ...
Only the 60HE is allowed to have fun
artisan raiden xsoft
W raiden
it s sick
I have the XL Mid raiden with my Stormbreaker max on jade skates rn and its the most response out of a mouse + pad ive experienced 💀
Id recommend Xray jades if you want more speed or obsidians skates for more control
My obsidians arrive today so gonna try those out to see if they work better on raiden since mid raiden is crazy speeds
I might switch to glass in the future
Depending on how much maintenance glass requires I might try em out too
for a refund whats the average time for the money to come back to the card does anyone know?
Maintenance is one of the best parts of glass.
think i ll get superglides
Just wipe it w/ a cloth every once in a while
since i m on really low sens
tf will it do to it lmao
Does every cherry profile keycap work on the 80 he ?
dont use glass skates on cloth, eventually glass skates develop scratches which ruin the surface of your pad
get xraypad jades
dmn
whats ur edpi?
and super glides are significantly more expensive than jade/obsidian skates from xray
jeeeeeeeeeesus
.35 1600 dpi cs
thats considered high sens in valo i think
i run .19 1600dpi
it doesn t convert 1 to 1
i said valo cuz idk cs
ight ty for input
wtf icant go on wootility v5 i cant connect
If you provide no details, we can't help.
👍
u got a screenshot?
hello everyone. will these stabs work with 80HE? https://deltakeyco.com/products/typeplus-x-yikb-stabilizers?variant=49752122753365
The Typeplus x YiKB stabilizer features a patented structure that sets it apart from anything else available. It includes a secured wire mechanism that minimizes the risk of wire popping out, ensuring reliable performance. Crafted with precision tooling and premium POK material, it offers superb stability, low rattle,
yeah
the expected at warehouse date changed from 19th december to 27th december is that for another batch or is it getting delayed?
ty
When the 80HE was announced, many despised the layout. Has the sentiment changed over time? Are people warning up to it?
it got changed
i mean a few still prefer a full tkl for case swapping to be easier
hardcore folks still hate it
but a lot of those hardcore folks were never buying the 80he anyway and came from custom keyboard land
custom kbs are like aesthetic
stepping into HE is like u enter racing where you want to find the most optimal tuning setups
whats the best feeling he switch?
how long will it takes to be shipped to the warehouse not to mention the date above
a week
at most like 2
mine went straight from mass production to already being in the warehouse
Before new year maybe
Mine too
Even fulfilment and shipped off
will i be notified if All items in the order are at the warehouse or when i log into the website i'll know ?
an email and a ping in discord for when address confirmations open
thanks bro
how long does it usually take support to reply? i sent an email november 28 regarding an issue with my new 80he and havent gotten any answers yet
also who knows how much the taxes will be in Saudi Arabia ?
and how much did it cost to who ever buy from Saudi Arabia
is there a chance that i get my keyboard before i have to wait for keycaps?
Access and edit your orders, connect your discord, and manage your Wooting account.
Your order won't ship out till everything is there.
okay Thanks <3
If ya’ll didnt see https://youtu.be/yBl8cKUg7c4?si=vJhOqpCQvpjg2PPd
Check out the Carpio 2.0 from DeltaHub and use code 'BADSEEDTECH' to save some cash at checkout! - https://deltahub.io/en-eu/products/carpio-ergonomic-wrist-rest?ref=badseedtech
Didn't take long to get our first aftermarket case for the Wooting 80HE! The GT-80 from KBDfans is a big step forward for them and a great visual alternative, but depen...
maybe shafie played the long game
he missed out on batch 1 gt-80 to get in on batch 1 gt-80 premium edition
Imagine needing to offer a premium edition.
actually that might be the hidden project they told me abt
its just business
premium gt80 gang
actually no, im getting regular version lol
It's bad business - Because you're telling your potential customers upfront to wait for the "better" version to make a decision.
they will probably list their "premium" version for 300$
GT80 extra premium zinc case when
They should have announced both together.
What’s the difference between premium and normal
yes
yes
probably marketing and price
Any actual differences
we dont know
Like material
That's the entire point - We don't know yet. 😄
Theres gonna be a premium version in the case? Tf
Oh
thats actually weird
I should’ve watched the video
nah its just another case probably
Maybe to build up hype? Or they’ve literally never even started working on it
not marketed as a gt80+
there was only 1 batch and theyre making a new premium mega gaming edition
Sounds silly
Like I said - You're just hurting your own brand by not announcing them together. Now potential customers have to decide if they want to commit to an expensive case - or hold off blindly for a supposed "premium" option.
Yeah seems dumb
gt80 was already nice 🤷♂️
dont worry guys GT80++ is releasing Fall 2025
Has gt80 been shipped yet
It is
First batch will ship in January supposedly.
Not at all
Hopefully we’ll see this “premium” version theyve been yapping about
premium gt80 😭
The color is slightly different and is .1 pounds heavier!
i just want a mode 80he case. All i can do is remind them once in awhile in their discord that a wooting 80he case would be really cool and sell well
all for extra $$$ 😎
If I were to assume it’ll just be a slightly different design
Maybe like a design that supports with and without the badge in one case
nah its sounds big
the staff were quite hyped on this
its probably completely different case which will cost 300$ or something
yea
no thanks
No way they’ll sell it for that much
oh they will
Thats so absurd wtf
Only people who’ll buy it are custom keyboard addicts or people who dont know any better
better be fused with the bones of Jesus and Moses for $300 case
and blessed with holy water
The blood of jesus molded into keycaps
wait how much is premium?
we dont know
that would make a cool halloween transparent keycap set theme
yea, if gt80 costs 120$ their "premium" will cost over 200$
gotta wait til GTA 6 before getting the chance to pay $300 for aluminum case
man just get a wooting zinc 😭
just get gt80 buddy
Reason people bought the tofu 60 was because it was cheap
Gold case
Gt 80 is a bit more priced but it’s reasonable since its a custom layout
gold alloy would go hard
Only $10 more than the zinc and will be delivered around the same time
Fr
I really want the white and gold gt 80 it looks so good
based
I'd be a lot more interested in the GT80, if it came with adjustable height.
Just seems like a miss given the price and quality of work.
the sound aint for me
Such a missed opportunity
custom brands rarely do adjustable feet
it's almost always just 1 angle for even super premium brands
Just stack paper under your keyboard 
it's why i want mode to make a case because they're one of the few premium brands who do lower angle options
everyone else tends to do 7 degrees+
Hi guys this might be answered somewhere but I could not find it via search.
I have ordered the wooting 80HE and it says (on the management page) that the order is on hold because a cancellation was requested. I did not cancel it, at least not intentionally, but I also can not release it from hold so I was wondering if it is just displayed as "on hold" until it can be shipped from the warehouse.
Could any of you let me know how it is displayed for you?
this doesnt sound normal to me. Please go into the order in your hub and contact support via the "contact us" button directly in the order
there might be a problem with the payment or a typo in the address or something, they will let you know 🙂
used by the church to type out scripture 1 character/pray
I went to the wootility web page, it said there's an update I can download. I pressed download. On the bottom right of my screen a notification popped up saying "restore to update" and it had the "restore button, I pressed it. As I pressed it, I realised the update had already started downloading, the page restored and that was it, my keyboard doesn't work, the wootility page doesn't identify it, I cannot connect it and the button E and R are glowing red, I guess indicating an error. What do I do?
Right. So the board accidentally messed up the firmware, and now it's showing ER(ror)
Open up Wootility, click the help tab on the left and follow instructions.
I cannot initialize it. The PC does not detect it
Sadly my keyboard won't be here until like January
Does a lekker switch fit every cherry mx switches?
Sometimes even after following this guide Issue - Wootility doesn't detect the Wooting the Wootility still can not detect the keyboard, this can be because of d
But that's not that long
Unplugging it and holding the keys down while plugging it in doesn't help?
The thing that the help system specifgically asks you to.
yeah i put into restore mode, but to continue you have to do something in the Wootility app which I cannot acces because the device is not initialized
🤔
What are the best wootility settings in ur opinion for osu?
I'm sure they are super specific depending on the mode. Try asking in #🎶│osu
How can you not access the app?
Okay, I already did that and was still waiting for the response. Thank you for letting me know 🙂
ancyman try that guide from wooting
Does a lekker v2 switch fit every cherry mx switches?
sorry?
does a switch fit a switch?
Swiss witches all over again.
u mean cherry mx keycaps?
then ya
yeah, I'm doing it right now, thanks!
same here
im still eu-walvis and no mini batch yet
It is all preference
Thank you so much for the help, I restarted my PC a couple of times and I could finally initialise the device and restored it using the app!

when is the mini batch updatng?
i think only weekdays based on my experience (i could be wrong).
Yay I ordered and got role worth.
ooo ordered just now?
@umbral timber nah 3 days ago eu walvis
gotcha gotcha
But role came in just now wth
well welcome to the most painful part: waiting 😆
Well it says 2025-02-15 :((((
Yeh lonely road ahead 80he only main board switches and caps rest i designed on my own custom made
oh that's pre sick
i waited 2 months for kb so hang in there
Every day I check just to see same date xD it's hard at first when I ordered it said dec 25 but after confirmation it changed.
Oh Yeh chinese 1week or 2 ?
I also spam checking the order status lol. Mine is mid January though
Got lucky
@pearl hound ESTIMATED DELIVERY
02 - 15 January 2025 wait how is 02 month January????
The 2nd day of jan to the 15th of jan i think is what it's saying
Not 2nd month
@pearl hound ah ty so same as yours i guess
Yeah
Im waiting for it to finally get to the warehouse. 🙏
Im so impatient with it lol
did you guys fixxed the 8k polling rate issue?
Latest firmware helped a lot
I have been playing for the whole day on 8k Pollingrate and everything works fine
still deranked in val tho :c
they are still working on it, but 8k issue should be gone for most folks
I really appreciate the software being web based instead of a slow bloated application always running in the system tray
You can dowland app but you only need it use once
i got a question. so ive seen this ss that the 80he are in the walvis warehouse and are already shipping



ONE OF US