#đâwooting80he
1 messages ¡ Page 273 of 1
like when you type hello but like you also press on p or i or l ?
lol
when i type a word for example Banana and after i pressed the letter a of it and keep going with the rest it keeps typing a as if i still would hold it
ooh
well it happends
i have that aswell
but its soooo much better then steelseries
what do you do then? i disconnect the keyboard and plug it in again but it sucks so hard
wait i have video of it
do you mean this
this was on my steelseries apex pro tkl 2019
when i was typing invoerrechten
Move the profile to the first slot.
is anyone else having an issue that thair Esc key is not lighting up?
i cant find the poling thing in the settings, it is possible without the application?
it's under the other settings area not the keyboard actuation stuff
oh i found the full image for the chinese one @lime falcon
so you can see there was some improvement from lekker to lekker v2, just the problem is vs. everything else it's still way below
what do the numbers mean
they're basically testing magnetic flux change at the bottom out
basically how much can you get the switch to change it's flux and thereby trigger a change in what the keyboard is reading as it's position
yeah ttc magneto rgb and ttc magneto
those are expensive af though
yeah honestly the 'value' box stem that's similar in performance to them is gateron jade gaming and ttc uranus esports
i wouldn't buy ttc magneto rgb unless you REALLY wanted the rgb see through housing
Hey, Iâm having an issue with my 80HE where a few random keys just arenât working and some are sending the wrong inputs. I turned the polling rate down to 1000hz and it still didnât fix
tried different usb port/cable?
damn
Is it normal that the 80he case gets really hot
havent noticed on mine
I can like feel my deskmat is slightly damp right under the keyboard
i've never felt my keyboard getting hot ever
but then again i never touch anything but the keys
I remember my 60he was slightly warm, but 80he is fine
also I dont use rgb so maybe thats why
I have the rgb on 70% brightness all the time
if its not hot, its fine. dont worry
I found the rgb turning off every 30 seconds very annoying so I turned it to always stay on
This is what I use
I turned them both on 30 min
how hot are we talking
like lukewarm or uncomfortable
its like touching my forehead
because if you mean just around room temp yeah my 80HE is like that
thats abnormally warm
my 80he has not been hot at all
around*
so no tachyon right
i leave it off
also for some reason my 80HE LEDs seem to be more dim than my 60HE+ LEDs both at 70% same RGB settings and same stock 60HE+ cable
70% i mean
Damn my shits been ready to pack for a week +
Im cursed when it comes to ordering from wooting lol
was prob set to "ready to pack" status too early
more of where this came from: https://www.kdocs.cn/l/cm7TXhkobT9o
has anyone else had a key be registered as a press immediately when they inserted a new switch? in wootility it shows 0.7mm already when i lay the switch on top of the board. after insertion it shows 1.6mm.
same here. my estimated delivery went from 20-24th of november to now 28-2nd of december
black zinc case ansi?
yes
and the board goes crazy after insertion in general
that's normal. You're supposed to replug the keyboard when changing switches so it recalibrates
Iâm going to commit genocide
oh i see, thx
i assume your order will be shipped next week
damn I only placed mine last month. Its felt like buying a new toy that you cant play with till Christmas xD
Mines 30 Nov - 09 Dec
Yeah itâs the first thing I ordered for my ânew setupâ
Currently the last thing left
i have same, and when I did see they mix now shipments with ppl who did order white and chnaged to black after news that white have problems.... its mega cringe....
Very
Yea kinda the same for me, my keyboard is the oldest thing I have rn other than my side monitor
I picked black day one
same.
I hope the zinc is worth it
the guy that asked franceska albanese about "how do you know that they commit a genocide, did they have an official document about that" would be proud
everyone elses 80he keys sound way louder then when it was new
Hey donât say the potato didnât warn
im on the fence of just straight up returning this keyboard, the keys all sound very different after some use, all of them in general sound very different, the stabilizer on my spacebar is chalked, qc isnt really there at all, the led bar is full of black specs aswell, i was expecting something different for 230 euro
I heard people removing the pads under the stabilizers helped
Donât have a kb to confirm tho
Just sucks. This keyboard was gonna be a potential birthday gift for my closest friend and I had hopes to receive it before I drive down to the states on the 26th for USA Thanksgiving. Plus $500 cad now for a gift that will be arrive way too late???? Sad how this is how I start my Wooting journey
yeah im not really in the mood of modifying a prebuilt keyboard for 230 euro for it to sound decent
i also dont know what it is but for some keys like the A and D key that i use alot in gaming the sound changed drastically like the lube just kinda dissapeared or something
Is it rng for it to sound good out of box then?
Yeah again not sure if what I said is gonna help anyway I just saw some ppl talking about it here a couple days ago
thats crazy đŽ
yes and the QC for what i have seen on the spacebar is very bad. legit alot of reviewers spacebar is bad on one side, mine is aswell.
is that the wire being bad then or
its exremely rattly and just lubing it doesnt fix it because the wire itself from the spacebar isnt even
and some even more concering stuff is that some people legit get BENT keyboards
i have HE60 module + Optimum set and sound is SICK good I hope HE80 will have at least good sound comparing it.
I sure hope mine doesnât suck after all this wait 
yea same
my 80he stopped working a day after i got it 3: bad luck
+1
I dont often read those kind of impressions but if it does happen to you that really sucks
Ill be going back to razer if this is how it plays out
i waited since april and so far im not really seeing the benefit to this over something that is way cheaper
support said that they would straight up replace the keyboard which is nice. im gonna see how the new one turns out
how long did it take support to help you? just wondering
Thats good atleast yeah
i put my ticket in last night so iâm praying abt a week
yeah in 6 months đ
Took like 8 days for them to respond
okay tysm
It always took 2 weeks to get started here, and then the follow up replies take like 3-5 days
if my replacement keyboard doesnt have any of the issues that i have rn, i will be happy and tell you guys. if it happens to have some qc issue i might just return it.
Can you make vid of the spacebar, kind of curious
I look forward to seeing how it goes
yes
Appreciate it
I just hope mine turns out fine đ
Ouch
I did get AKKO year of Dragon to my GF as gift its nice TKL too when you like how it look
Does anyone that lives in Canada know what company they used for shipping?
Canada Post is on strike so im worried about that
ups
ok great
interesting that wooting consistently places decently low on the charts, and the melgeek made68 is high up usually
Only charts that are not fake are from eyejoker
And wtf is that sussy link
who is eyejoker
douyin?
Ye
chinese tiktok
theres a ton of content in china about magnetic keyboards
im chinese (not from china, america)
I cant even enter that
eyejoker also has lekkers placed very low though
am I wrong in maybe saying that wooting should allow the user to have custom deadzones? it's really not that snappy, my 60HE+ genuinely feels faster (no tachyon) than my 80HE... with or without tachyon
whether it's by mm or gauss readings lekkers don't place very well
the only reason I use the 80HE is because it is more usable for me
honestly i never felt much difference between 60he+ and 80he, you might just not like bounce
i prefer the way it physically feels it makes gaming easier on my hands
there's a slight stiffness difference is all. The very tiny deadzone difference between the 2 shouldn't have an impact on snappier feel
Remember lower number = better for these people
i see tyvm
Its just you, never noticed a difference between 60he and 80he, infact 80he felt snappier
Well it is more consistient
you will never notice that "consistency"
must be my unit honestly, I really dont like how sluggish and inconsistent it feels. again has nothing to do with the hardware, this is purely a firmware/software thing, maybe my unit is a dud idk
if anything what he's noticing is probably the small give of the gasket if he's hyper sensitive to that. The deadzone difference between 60he+ and 80he is so small that it shouldn't be noticable
so stiffness is affecting how it feels to you
What's wrong with your keyboard?
i am mostly using the bottom right the up arrow
read above
TLDR?
so the stiffest part of the board
QC is bad
it shouldnt be an issue
how long did you have it for
the gasket in wooting moves as one
2 days so far
how are the stabilizers for you?
Beautiful
do all of your switches sound the same?
My switches were well lubricated and it sounds very clean
has anyone else had this issue? my optimum series keycaps or a Fn key short?
No, some of them have a different pitch than others but they mostly all sound the same
Space bar sounds pretty muted
was the same for me in the beginning, a week in some of them sound way more pingy
Which is good
especially WASD etc
well i like a muted sound of a keeb
Fair
that looks like a mistake, best would be to email support and get the keycap sent over as soon as possible
Hall Effect keyboards aren't very good at that no?
and the whole entire sound profile kinda just changed, plus the wire on my spacebar is very bad
Was it that bad the entire time?
not really, but the sound profile of the 80he sounds exactly what i want
Fair
yeah the spacebar was chalked since the beginning
im gonna figure out a replacement with support and see if its better
I try to be gentle with it
luckily i was using dual shot 2 keycaps and the grey matches well for now but would like them completely blank haha. iâll contact support.
mine has dirty specs on the inside of the LED bar aswell
and the ABS case was scratched at one side
I mean i have one tiny black spec on the inside of my LED bar
my luck i guess, i always have to go through like 2 units of a product until its actually not broken
Nothing to fuss about though
wouldnt really care about it that much but this thing is like 230 euro
I love their wrist rest too
230 euro on plastic is kinda youch aswell
I wasn't expecting it to be silicon
I like it more than my razer foam/cloth one
Makes typing and playing games for a long period of time easier
Couldn't you lube your space bar
That didn't make it any better?
nope
and i mean dont get me wrong i know about the modding scene of keyboards and see what products are available there
for 230 euro man you can get some good stuf´f
Yeah but i think that the 80he is the best on the market
Latency wise
I've never used a keyboard that's felt so responsive
i mean, not really anymore
Regardless i'm very happy with my product and couldn't see myself using another keyboard
in the beginning beside the spacebar i was very happy with it aswelll
im just gonna wait for the replacement and see how thatll be
i wish I could say the same for my 80HE (even with tachyon on with time to fully calibrate)
i can always just return it so it isnt really that big of a deal, just waited so long lmao
That's fair. At least you have a great keyboard you an use in the meantime
What's wrong with your 80he?
i mean ill probably have to return it for them to send a replacement no? Xd
Depends if they're asking for it back
or does wooting ship out a new one while u send the old one back?
i doubt theyll just let me keep one lol
No clue how their returns and replacements work
they are very nice ive heard but i dont think that they are THAT nice lol
with wooting they tend to ship you new one then get the broken one sent back after. At least that's how it's been for me with my ticketed stuff in the past
thats nice atleast
im REALLY liking the keycaps of the 80HE though
the texture is unlike any other keeb ive tried and they are NICE af
đ¨đłđđ¤¨
if nothing else im most likely keeping the keycaps lol
To be honest I don't really care about the feel of keycaps
As long as they're not like REALLY bad quality
I'd rather have aesthetic keycaps
sussy is when chinese
There is only one china
- My 80HE unit with tachyon on and time to calibrate is more inconsistent (most times) than MY 60HE+ unit without tachyon, both blue spectrum, 70% RGB, RAW HE 50g. Same stock 60HE+ cable. The thing that annoys me is when it works well, it is way faster than the 60HE+ and I can genuinely feel it, but most times it's slower! And I can't control this!
- My PC plate is defective, on the bottom left of my Left ALT key is stuck pointed away from me and I can't press it in towards me (unfixable issue for me as a consumer)
- The Black Zinc top plate is not properly aligning with the keys on the PC plate. I tried pressing the plate as top left as I could but it was still off center, hard to explain. for example, the 60% alphanumeric portion, is centered, but the nav and arrow cluster are shifted too far to the top right of their cutouts. This is also unfixable as a consumer.
- Bottom of the case there is a blemish I haven't noticed at all until I started modding my kb (45~ days after ownership, I have owned it for just over 2 months)
Still tryna build my case but so far my unit is just not good.
I will be taking photos and videos of these issues
Statements like this can be very politically charged and lead to very opinionated conflicts of belief, which can very easily spiral out of control. Best to not make them [in a keyboard discord] in the first place.
Anyone having an issue where with an 80he, pressing down hard or spamming a key with 8khz + rt is disconnecting their keyboard?
Okay okay sorry mark
set 1000 polling
8khz matters for a game i play i wanna keep lol
which game?
Man i'm sorry you're experiencing those issues
its very inconsistent so IDK
no it doesnt
thanks 
i have to do 60fps frame perfects commonly
gd lol
I'll build my case and I trust Wooting will be able to resolve it
DUDE SAME
i thought ur name was kinda familiar
Yes, and difference between 8k and 1k is not even 1ms
there is a mod that also ties inputs to polling rate directly
(i dont use it but it still matters because at the standard 240tps u can still feel the difference)
when my 80HE works the way it should it works amazingly but my unit is not reliable in terms of its performance too. I usually play at 720FPS/TPS Physics bypass with CBF to get the rawest inputs possible
maybe the only game in the world where 8k vs 1k makes a difference
720 physics bypass is full cheating ngl LOL
only if the 8k is actually done properly
thats fine, i quit comp gd back in 2017
why dont you return it then, i feel like youre mentioning these issues for like a month
I probably should, I was just wondering if anyone else was
performance wise mine feels fine its just that it fully disconnects when this happens and its inconsistent
im spamming a RT button now on 8khz and its fine
consider lowering your brightness and try other usb port
i also have gateron jades so maybe the travel distance matters?
ive had this issue on 2 different PCS but ill try the brightness
but also the reason I use physics bypass is because without it the game looks like ass on 360Hz and I cannot go down to 240Hz because I wont be able to use ULMB 2 at all
also its happened on non RT keys as well
it's more of a clarity issue
it happens because of 8k
oh thats like confirmed?
power related issue, so just lower your brightness or just disable it
or just use 1k
i swear the game i play 8k actually makes a difference lol
I also tried completely dimming my board and enabling tachyon, and giving it time to fully calibrate, when it works it works really well but otherwise most times it still feels kinda slow (multiple times)
i gotta be honest I think the things you're noticing are not things other people are able to notice or scutinize that much (outside of the blemish thing). If it really bothers you then you should talk to wooting about a fix or return
Gonna try again..
Why after making my choice, this keeps coming back?
Only issue I noticed with Tachyon mode is it makes me drop frames lol
If you choose to wait, you can later decide that you don't want to wait and make another choice
So this part is only applicable to the first 2 options right?
what is even the advantage to using 720fps physics bypass AND cbf? what HZ is ur monitor? if ur talking about this in the scope of gd then yeah no one else will probably feel this because of how precise you need to be to notice it
yeah my case is definitely more niche but yeah I will open a ticket with wooting, will wait patiently!
meet me in #đâtech
Definitely applicable to "ship it now" and is applicable to "swap to black" once that gets executed on in the back end
Alright thanks for the clarification!
Hope good news for white zinc V2 soon!
I still donât notice that much of a difference honestly I think rapid trigger and magnetic switches are way more important than 8k
rapid trigger makes so much of a difference i cant use it because of how much better it is. 8k helps purely for input delay and timings tho
Do you have the wooting 80he
Whatâs going on with your rapid trigger
My 80he finally came in after 3 months !!!!
it just makes ship so heavy i cant use it my muscle memory is messed up lol its way too accurate
No case
How you do that
That looks so sick :)
hi guys i have my 80he is this normal sometime he freeze like he don't respond and i have to re connect it
pinned in #1019755933959733258
e
I canât believe itâs here
looks like a zinc case tbyh
Yeah
I donât know if I makes it heavy but it take a tad bit to adjust to
took me 5 months for mine to come đ
ordered it back in july
Is there a specific technique to remove v2 switches, Iâve attempted to pull one a few times now and the resistance Iâm getting seems like Iâm going to break the switch
Mine is going on 9 months now and all now i can get mine this is BS
wiggle it and then pull out
damn
I kinda just forgot about it until I checked it a week or so ago and then I saw it was about to be shipped
its easier to pull out with metal switch puller
anyone got a picture of their 80he with yellow/ gold back lights?
wanna check smth rq
what's the deal with these nonexistent keys next to the spacebar
those are leds not keys
yes
how do I make mine compatible with 8000
uhh like this
waiting for wooting to figure out the exact fix lol
that's all you can really do for now
bit more yellow pls :V
Like R255 G245?
also how do I select more keys efficiently rather than just dragging over all of them 1 by 1
250 200
the light doesn't bleed as much IRL if that matters
think that's more my 8 year old phone camera
oh okay
Mmmm, does your function row have a different colour?
Mine have when I set the exact same colour as the rest of the keyboard
Like if I put that yellow, the funcion row looks totally orange
It does kinda look a bit different I think?
check pins in #âŹârappy_and_snappy
ok not that big of a difference
Well irl it is
can it produce blue, red and green fine?
camera doesn't capture it as it really is
on my old keyboard the blue diodes ended up dying
nono I meant that my keyboard doesn't have that big of a difference
I see on your screenshot it's very noticeable xD
perfect
those are two completely different colours
Yes and I have set up the exact same in the entire keyboard
that's odd
That's why I'm wondering
what happens if you have pure blue, pure red and pure green?
Works fine
then I'd assume it's a software thing?
since it can produce all the colours
or rather all the diodes work
not a hardware guy though
Maybe it is because of the side legends in the function rows don't capture all the light I don't know
It's pretty strange only with the yellow colour
It produces a orange one
I don't have your issue, in my case I wasn't sure whether the colour was slightly weaker but it didn't look like an entirely different colour
If you mess around with only the function row and use different colours can you make it into that yellow?
Going to try pure yellow
almost 8 months of waiting and my 80he is still not here đ đ
send ss of your wootility page?
like this
urine
thats pretty wierd acc
The thing is, in this case what I see is the function row is displaying the colour properly, a real yellow. But the rest of the keyboard is greenish
Heya! I still have to wait another month for my 80HE. I saw a shocking video by boardzy (228K subscribers) on YouTube, that was released 4 hours ago.
Here are the main points he was talking about:
He was discussing his new Silkakeyb HM80 and comparing it to the Wooting 80HE.
I will use Gemini to quickly sum this video up.
According to him:
âThe HM80 is a better keyboard than the Wooting 80HE.
The HM80 has a lower actuation point and a faster trigger speed.
The HM80 is also cheaper than the Wooting 80HE.
The Wooting 80HE has a better software and a longer warranty.
The HM80 is a better choice for gamers who want the best performance.
The Wooting 80HE is a better choice for gamers who want a more premium experience.â
Thanks Google AI 
With all that said, is it even viable for a keyboard to have these kinds of low actuation points? He referenced a screenshot of the software showing âFluctuations of 0.003 mmâ and a âReal Time Valueâ of a keypress in the software. I will attach it to this post.
I felt quite shocked after watching this video. I questioned myself if I purchased the right thing. And I obviously cannot compare all these keyboards like this guy seems to do constantly. Does anyone here know if this is a legitimate competitor now or just a cheap Chinese knock-off?
What keycaps are those, brother? Looks clean
rn the whole lowest actuation race doesnt make much sense
Does anyone know if the Wooting 80 HE Zinc White will be available before Christmas, so it can be under the tree on Christmas Day? (Germany, Berlin)
I think I found the issue, let me try
I have not seen the video, but my first reaction is the marketing claims on this keyboard reference the measurement fidelity within the range of a key press, as opposed to the end or start of the key press.
Our keyboards measures in increments far smaller than 0.1mm but this is generally irrelevant - what matters is the behaviour at the start and end of press
tl;dr - he's talking about a few different topics and the ai thing you did isn't all that accurate
what about the software, did he compare the software
Yep, I did @lean pagoda @worldly pebble. It is the blue colour of the keycap itself that is making the colour to look different. This is a set that have a gradient from white to blue downwards and the function rows are the one whites are displaying the colour properly
the main things boardzy is bringing up is whether wooting should allow lower actuation/rt and just give a warning that it may not be that stable to those who want to use it + also the topic that wootings switches suck as stock (in particular if they are part of the reason why wooting doesn't allow lower actuation/rt currently)
yk i kinda had a feeling X)
but i didnt wanna sound like a dumbass either XD
Does anyone know? It would be really important.
outside of that boardzy doesn't really know the technicalities of most of the stuff, he just prefers hyper sensitive settings and that's what he's campaigning for wooting allowing in their software
I wish he did! He didn't really show much of it in the video. He was ranting a lot. Personally, I wouldn't think that the software on the Silkakeyb would be anywhere near as good as Wootility. But he seemed very upset and not like someone who doesn't know what he is talking about.
no it wont
i literally went p sure ive had a physics class about stuff like this... oh well i never did pay much attention in class
i like boardzy but he doesn't know much about technical stuff, he just talks about what he thinks. I don't totally disagree with him on some points though, even if he doesn't quite get the full topic
Okey ):
he's not saying it's as good. He's saying they allow sub 1mm actuation and rt and he wants wooting to allow that specific setting (and deadzone adjustments)
he also mentions it sounds thocky but he hasmt even tried putting in jade pros in the 80he. and he talks about all switches having stem wobble. but doesnt seem to have tried geons
I guess maybe I need to get a better set that doesn't alter the colours that much
and down to the keycap rabbithole he goes

Clean af. I love it!
lol
stay frosty
i ordered in October 15 can i expect it to be delivered before Christmas?
What does the hub say?
Day 3 of owning an 80he, I still find it so hard to believe I actually own a wooting keyboard
literally almost compares to when I got my first pc build kind of feeling
m
i ordered in early nov, was able to jump to an earlier batch, and am supposed to receive it late nov or early dec
still gotta wait till december :(
Bruh why does backspace key look different from wtf?
Why does my and his 80 key format look different ?
Nordic spec
ISO layout vs ANSI layout
ISO has the big upside down enter
@red heart oh so basically personal preference
Kinda yeah
Or "whatever your country uses" preference.
Well, some countries use iso some use ansi
Yeah makes sense you havent seen ISO standard yet
Do they even have iso in the us store?
The US Wooting store does not stock anything but ANSI.
weird then i didnt even knew this
sane people should avoid boardzy videos. his entire purpose is to make you doubt yourself and change your mind every 3 days hoping you'd buy 53 different gaming mice and 12 keyboards
I had no clue that's pretty cool! Nevertheless i think it would be neat to have some experimental features that users can try that you guys know are safe to use like adjustable deadzones maybe and if you have say a Raw HE switch you can change the reading from 4.0mm to 3.4mm? just some food for thought :)
I think they will do that thing with the diferent switch ranges depending on the switch you have (as far as I remember a purple said it was planned)
The adjustable deadzone is a thing that would be nice tho, mainly to make people stop with the "the other keyboard has a smaller deadzone" comments
why in the profile it says my actuatuion point starts at .64 not 0
Is 0.1mm really not enough? lol
Surprisingly some schools would use it back in the day for some reason
no like it says im pressing it .64 when im not pressing it
Did you touch your keyboard while you started it?
it worked thxx
Shocking videos again from boardzy
are there any advantages in getting the gateron?
Jade Pro and youâre the winner imo unless you like the sound of the Geon Raw HE
Does anyone know how to get rid of the delay in [Mod Tap] mode?
Spacebar + Fn1 for example.
Real
I'm loving my wooting so far
Subjective. I mean if you like the sound maybe but does it justify $80..?
I love the sound of the L60's (they're very muted and soft)
yeah I've seen some reviews I kinda not like the sound if I remember it correctly
I'm level 270 rn
I'm just wondering if having that magnet thing in switches really helps
They sound much better irl
Im like lvl 90 lmao
are they clicky like the gaming keyboard e.g razer?
no
No they're much softer and quieter
Kinda like browns..?
I don't really know how to compare the sound to a switch you might know
But they're very satisfying to type on
I personally love the keyboard and think HipyoTech was overcritical of it
it was jarring how soft the 80he was
Then again he publicly critiques Effect keyboards
I'm getting more used to it tho
Same
How do you like the wrist rest?
I'm loving it so far. Extremely comfortable.
I complained about it not being magnetic before but honestly it's so firmly mounted into place it doesn't need to be
I didnt buy the wrist rest lol
Aww unfortunate
Homemade wrist rest
If it works it works
Is the 80He worth it over the 60 for gaming?
the 80he sounds a lot better than i thought it would
definitely sounds worse when i record it with my phone lol
ikr
waow, 1 more day for me
He rarely misses but he missed hard on the 80HE video
Then again, doing a video where you hate on something as popular as a Wooting keyboard is bound to get you views
using rapid trigger for normal typing feels pretty nice too
Hipyo thinks otherwise which is weird
sometimes i spam backspace a lot and it is nice having all of that register without having to lift my finger much
i havent had any issues so i dont see why he would not like it
He thinks itâs too chattery and that itâs too expensive
yeah it probably is too expensive, being $200 and not metal case, but i like it so far
But heâs legit looking for a keyboard thatâs just nice to type on and sounds good, which is like 30% of a reason of why a gamer would get a Wooting
im not that big into keyboards so idk what chatter really means
Everyone knows itâs for the polling rate and rapid trigger
Rattle and loud frequency noises
He likes deep thocc
also the fact that you can just buy, plug, customize, and use without having to install anything at all
yeah i definitely appreciate the web setup
Keyboard nerds have terminology for Keyboard part sounds or entire keyboard sound
He just wanted views
yeah so far i wouldnt really have any criticisms about this keyboard except for the price
ehh, it's alright. Mans gotta eat.
Hey, is it okay if my JST cable is bent like that?
Umm
For long term it might break
I have a question, do you guys know if you can temporarily disable advanced keys without deleting them in wootility? I want to have rappy snappy and snappy tappy and be able to switch between them without deleting each time
You cant have both on same key
Even if Iâm not moving it?
Because I did try to fit it in a way that it wouldnât bend but it just keeps going back that way
I suggest a different profile.
Or use Fn lock to stay on a different fn layer
You know there is pass trough channel.
It is going through the pass through channel
Sus
damn theres no way to actually disable it?
Mate
@winged island
If there is a way I do not know it.
i know i was just hoping that you could switch between them and disable one
You can see it here
When I noticed it, I took apart my keyboard again to try and place it the correct way but the cable said no, and Iâm trying not to take it appart too often because Iâm having trouble opening the case because of the bottom hooks
jesus
did i confirm shipping address
Ironic since he has a 500$ keyboard on his top 5
I think Hipyo is a shill imo
Even if his thoughts are his own if someone gave you 1000$ and asked you to rate their outfit 1/10 you'd rate them highly
could be, his opinions are very inconsistent imo
Agreed
Raw is elegant and the typing feels incredible compared to the gats on the lekker
Love it.
just got my 80 he and sometimes when im trying to change the rgb colors it disconnects then tries to reconnect. then it wont let me save any changes. anyone else have this issue or have an idea on how to fix it?
Does anyone know why my P, O, and J keys might have failed? I unplugged and replugged it back in and it worked fine afterwards but I wanted to check if anyone knew what happened wto it so that I can avoid it failing again
probably just a calibration issue. try not to touch any keys for a few seconds after plugging in the keyboard.
Ah alright, thank you!
Look at the letters left from the enter, I've got ü ä and Ü because I'm Swedish xd
It's the Nordic layout
How do you game with that small shift đđ
Where can I buy the white aluminum 80HE case?
Bruh i got Ä ÄĹşźÄĹĂłÄ
Can I not yet?
Not yet..
Ok
I got the ghost case, but I want the white aluminum because it would look really clean
i wanna get the ttc rgb ones befcause rgb
They are making v2 due to issue
Oh ok
Just got my first Wooting and chose the 80HE. I want to order some custom key caps but donât know the size or where(website) I should get them from. Can someone help me out?
Iâm looking for the same thing
a huge list of keyboard vendors, pretty much all of them sell keycaps https://www.alexotos.com/keyboard-vendor-list/
I just want clean white keycaps, but all I see is just weird patterns
wooting sells white keycaps
Yeah, but are there any good?
what is your standard of "good"
can someone send me a wooting keybind profile for black ops 6 / new warzone
I just thought people said they were a little on the cheap side
idk I've never had a problem with it, from my perspective your enter looks weird xD
what do u bind rappy snappy too, etc
tbh iso is prob better for typing but for gaming and looks its not even it close, ANSI ftw
atp its just preference for keycap quality
there arent THAT many places that sell plain white keycaps
The ultimate white keycaps
what about shine through
idk I prefer ISO for both since I've spent my entire life on them. I get one extra key for keybinds on the left which is pretty nice
I mean yeah that's what it boils down to xd
ANSI looks weird to me because we don't use it here
I guess some laptops do
idk
Slamming my finger down on the enter key for iso does go hard though
you know
I lowkey want a keyboard that has a smaller spacebar and just more keys around it
i'm satisfied with the 80he so far, idk how to test it extensively but i've been playing a few FPS games and i noticed the difference
kinda huge compared to my old keyboard with was a Linear Switches Logitech G915
that does not sound bad tbh
I was on the steelseries apex pro and I noticed the 0.1mm actuation on this feeling more like 0.1mm than on the apex pro xD
other than that it obviously just feels completely different to use
I thought I'd be horrible typing with it for a long time since I could barely type on my friends keychron but I can still hit like the 115-135 range semi consistently
This is the Anodized Gray option i'm guessing?
are there any after market springs that are long
The ones in the Jade Pro 
btw do I have to be careful about what USB C cables I plug into the wooting 80he? I was curious if I could just connect the wooting to my ipad with the usb c charging cable that comes with the ipad
not biying jade pros just for their springs
i wish i was baller like that
i quite like the ttc magneto switches
22mm long
i have a small switch tester and the only thing i hate about it is how loud it acn be
the ttc
do you guys think the GT-80 case will work with the wooting 80HE?
it has been specifically designed only for the 80he
would be a pretty shitty product if it didnt work with the thing it was designed for
which is actually a pretty funny thought tbh
i'm new to keyboard modifying so was just wondering cause i've ordered my wooting 80he so i'm just looking around for things i could buy in the future
Personally Iâd get it; gorgeous looking case
Yeah big preference thing; personally I find all the stock cases ugly. The GT was the thing that convinced me to get the 80HE
gt...
i kinda like the anodized pine green
it doesnt its not like a mouse as you aren't saturating the polls of a keyboard (u aren't doing 8k key presses a second) like u are with a mouse sensor
ah ok thank you
yeah just was asking cause 8k polling mouse causes terrible stutters for me and didnt want that to happen to me again
think its silver
Ghost goes so well with every semi gamey keycap
Still strong while waiting for my white zinc alloy. It surely will come before Christmas 
another day checking if na batch 2 white zinc v1 is out early 
How do you guys have it on the website it says expected for December
different batch
What does batch mean ?
It's a bunch of orders
Kk thanks
Another day of telling you to keep an eye on #đŚâbatch_updates 
Buy and wait
3rd batch is coming in Jan 
Comes in batches until there's enough so it can be kept in stock at all times
Then batches come to resupply stock 
I've had a MacroPad for a while and its nice and all but I was thinking of getting the 80he so i can reprogram the extra side buttons + arrow keys for what i need
if im buying anything from wooting again im never using fedex again 
monday it is i guess 
The fulfilment centers might be working overtime shifts, if they are busy - It is the Christmas season after all, and we're not their only customers.
Black zinc
why are the artisan mouepads considered the best
the ones from this website https://www.artisan-jp.com/
ĺŽăŻćľˇĺ¤ăăă使ăŁăŚăćĽćŹčŁ˝ă˛ăźăăłă°ăăŚăšăăăăĺŁăłăă ăă§72ăśĺ˝äťĽä¸ăŽĺ˝ă§ä˝żç¨ăăăŚăăäşĺŽăä¸çĺŻä¸ăŽăăŤă祏庌ă¨6税éĄăŽćťčľ°é˘ăŞăŠă§ćľˇĺ¤ăĄăźăŤăźăă¤ăłăšăă¤ă˘ăćĽçăŽĺ¸¸čăéŠć°ăăćĽćŹăŽă˛ăźăăłă°ăăŚăšăăăăčśăăăšăăźăăăăă
their material are just better thats it 
Japan doesn't understand website design. They are genuinely stuck in a 90s time bubble.
well thank god they dont embed intrusive ads onto em 
This is what Yahoo looks like today. They really stick with that classic newspaper look as hard as they can.
they dont sell any 90 x 40 cm mouespads
đ
as expected, same day
dang it 
busy myself with Dynasty Warrior Origin demo, gameplay legit good
personally i just bought a good enough mousepad and use better skates and thats good enough for me since i dont play osu
my issue with the shipping aint even with wooting
my keyboard is passing through san francisco so now i have to pray to god that it even makes it here with the strike going on
almost all packages that pass through SF is basically gambling
my last package ( a literal lotion ) took 3 months
im just worried my 3rd party vendor holding my package for a long time
im not a pro player anyways.. im not sure why i would need that fr.
yea tbh mousepad are almost the same ngl unless u use glass
obv material quality may differ and bla bla bla
what are some good stores that sell nice keycap sets
higround is always out of sale...
is there an estimated date on kbdfans for the gt 80 to be shipped out if you preorder it? iâm looking to buy it but i canât find anything regarding it on their website
Nice looking or nice quality?
either or
Wouldn't expect April at the very earliest given what we know so far. But KBDfans hasn't given a date iirc?
Theyâll announce the shipping date on November 30
It says at the bottom if Iâm not wrong

So because of those mini-batches its possible to get your keyboard earlier/later depending on the model you've ordered right?
Yes, more specific details will be made available over the next week or two
okay thanks 
When is the estimate for fulfillment of eu walvis
oh it does iâm blind thatâs on me LMAO
Thanks
thank you though i appreciate it
yeee hopefully itâll be good news on the 30th
Guys some people had their delivery dates changed for eu walvis why did mine not change
Did you... read the batch updates I just pointed you to?
Yes but i didnât understand if u can just explain that point to me
Read it again? But dont skim over it
So the reallocation started and i have to wait through two weeks
Thanks
Does ur local mall have a hobbyist shop for those ? Usually i just search local
yo guys i need some opinions
pudding or these non shine through sublimation keycaps
( i know it looks a bit bad with a few missing keys xD)
Anyone here who has both the metal and PCR case? I ordered mine with PCR as I am a big polycarbonate fan but the 80he PCR case feels incredibly low quality. Does the zinc case show a decent amount of the RGB (considering I went with PCR frost the entire keyboard gets lit up) and was it worth the extra money?
Exactly the same amount of RGB.
would rather recommend this https://kbdfans.com/collections/gt-80
looks way higher quality
wait there's already third party cases being made? đ
its preorder
is there a reason why the next batch (4) will only be available in march?
like brass trough weight, cnc alu and ballcatch system
chinese new year
oh right
i ordered the black one without the front badge
I guess it would be cope to wait on a proper PC case... Like PC can be premium feeling as hell its just the 80HE
PCR that is low quality :/
yup i agree that case is trash quality
most cheap feeling case on any keyboard i had in a long while. might be cause im usually into customs
yeah same, I knew that it wouldnt be similar to my mode envoy or my two norbauer PC cases... I expected more though
even my bauer lite feels way more premium
and its injection molded PC
exactly that's the point and the bauer lite is low cost injection mold
still my fav board out of the ones i own
like what wooting does great is software the hardware is a bit less impressive
I was pleasantly surprised by the default stabs though, but yeah I bought for software as well
nothing that u can't fix with new switches and caps + case
uhm yeah my stabs where horrible
changed them for staebies
guess u where lucky
oh, hmm interesting. Yeah mine are decent, feels decent and doesn't really rattle. I've got a set of TX AP stabs here though. Just need to bandaid mod them first đŹ
?
bandaid mod tx stabs? i really hope for my sanities sake that u don't mean hollee mod
why would you not mod the tx stabs?
cause tx just needs lube?
u don't even need to balance the wire and holee mod is the worst that u can do to ur stabs it just make a mushy mess.
especially on TX Stabs
the tolerances are so tight that u don't need to do anything other then lube. Oh and only use 205g0 dielectric grease makes them tick
hmm, I don't know. I feel like holee mod may just be preference I have two sets though so I could always mod one and leave the other stock to test.
only hopefully 4 more days until shipment starts
PCR as I am a big polycarbonate fan
The PC in PCR does not stand for polycarbonate. Post Consumer Recycled.
I discovered that it stands for Pretty Crappy, Right?
I'm huffing copium already trying to find actual decent PC case preorder 
The only 3rd party case for the 80HE that I'm aware of that's even been announced is aluminium.
Yeah it may be too early. PC isn't he most popular choice for sure
ah nice cnc PC case really would be nice
would probably go quicker if they finally released the design files 
i thought wooting was doing that
yes, but it is taking them quite a while đ
probably low priority, which is reasonable
my lekker switches on my 80he doesent wanna come off when i use the switch puller
if i use too much force will it then break?
thats cause they use way more plastic hooks then normal mx switches. i also had issue getting them out
just wiggle and be carefull
and i would highly recommend that u use the included puller
did you unscrew the pcb
no just puller
when i replaced my switches on the 80he i took everything apart including taking the pcb off since wooting recommend it, and it was super easy
Wondering how to swap your Lekker switches inside your Wooting keyboard? Follow along with this tutorial and find out!
Tool kit https://wooting.io/product/blank-switch-toolkit
L45 Lekker Switches https://wooting.io/product/lekker-switch-linear45
L60 Lekker Switches https://wooting.io/product/lekker-switch-linear60
⤠Follow our socials!
đ§âđ¤âđ§ ...
you need to wiggle the switch and pull it out
make sure youâve depressed the clasp on both sides then wiggle back and forth whilst pulling up
Any other Third Party Cases? This looks sweet so far
not yet
this is the only one ik off
but i bet there are gonna be a bunch soonish
I plan to get white version
including ballcatch system and a brass through weight
i orderered the black one. its gonna be paired with gmk 80082 and geon raws HE
woke up this morning and my rpgs set for my profile just stopped working
I dislike the Lines tho, and the LED Bar to the edge 'cuz it cuts off
But overall looks nice still
black is so nice too, with golden strap buckle
did you order with or without metal badge
without
looks very tacky to me
i dont even want the light bar
or any rgb for that matter
lightbar will look nice on white case
what keycaps are u planning for urs?
Ill just get wooting white keycaps
Guys is there anything important that isnt talked abt much on the wooting80he just ordered it
No, its a great keyboard youll enjoy it
I haven't heard anybody talking about it smelling like Hot Cocoa on a cold winter's day
yeah, the software is way better than expected
Hello everyone... i need valorant settings for 80he. dont know how to configure
it's more durable than a non hall effect kb because the switches have no contacts that wear out
idk i dont see enough ppl bringing up basic non gaming related benefits of contactless switches
any news on when the white zinc case is available?
Nothing beyond the recent post in #đŚâbatch_updates
should I wait for it or just go ahead to receive my black one?
How could anyone possibly know what you want?
I think people just want to be told what to do.
You should wait for it.
hey
Literally time flies! can't wait for it to arrive đ
Literally figuratively. Nice!
Maybe this week they will get shipped out 
hopefully bro!
me neither
my switches, stabs, keycaps have all been sitting here for like 2 months now, white zinc is worth the wait tho surely
howwww?
1 of my 80he profiles keeps glitching out after like 10 mins of using it, it just randomly starts moving in one direction and then the rest of the keys just don't work anymore. Any ways to fix this?
Is Wooting sitting o0n a ton of white zinc v1 cases right now?
wym how
Just enough for those who ordered and some replacements if anything were to happen I bet
They said that the amount of money they will give away if people chose to keep the V1 was on the 6 figures
so yeah...
Yessir!
Still hoping for a before Xmas release date đ
All preference really
I have a feeling itâll be Dec 7-10 for our magical day
Just in time for POE 2 early access 
anyone passing their 80he white? :((
Yes.
How much money do you have
What kind of question is that xD
Is SOCD/Rappy snappy a real must in valorant ?
Nothing is a must
Not a must but itâs a nice freebie for cleaning up your input a little
i see
Itâs not a major difference in valorant as much as CS, but itâs still a small improvement
I got $10 on my desk right now. Feeling flush.
rapid trigger you instantly notice, if you've got good mechanics idk about SOCD, it just kinda makes it moreflawless (impression after 1-2 days of using it)
thx i'll test that in the game
I think the update vid on white v2 would drop in the following upcoming week then, as it didnt happen last one
Just Bought my first wooting (80he Raw Zinc) the other day. It's my first try at building a keyboard and am looking to get Geon Raw HE switches - does anyone know where I can get them without the crazy shipping fee? Geons website is $30 buit KBDFans has some for Black friday and shipping is only $20 for U.S so may just go with that? Also any additional modding tips and tricks would be amazing!
#đ§âkeyboard_modding and #đŞâmodding_faq to the rescue
divinekey
Bro I really hope so!
Thank you very much!
Iâm sorry but what is that abbreviated for?
Nope, sticking with V2 white zinc
There's profiles you can find inside of the #đâwootabase_profiles
They have optimized settings for various games (including valorant) :)
Path of Exile 2
Ohh looks like a diablo look alike

btw did the white zinc units land in the US fulfillment center?
Last update said it was estimated for the 23rd
thats what the diablo 4 game director said on twitter when he saw how good the reveal was and was salty that other companies do it better than them
Blizzard went down the drain a decade ago
"However, I expect this date to slip into the following week - we're deep into peak season and Black Friday is right around the corner: every step of the logistics process is at or above capacity. "
from the last batch update
Path of Exile 2 - ARPG game
I preordered a Pwnage Stormbreaker Max carbon fiber and it's been delayed several times too
Which one did you get
the Whzy version
I got the nacho purple one so weâre prob gonna be waiting til 12/5 đĽ˛
yeah I just saw the update from Lemonade
oh well, that's just how things always are
The Nacho one looks pretty nice too
D4 is so cooked
It matches my purple cable now 
I wish they had a pure white one but it's probably hard to deal with the matte coating
Twilight purple is đĽ
it's gonna turn yellow like FM
Closest is the frost fire
Yep and they cancelled/delayed that colorway

Hoping white zinc enjoyers can be happy before xmas break
what a glorious day
Hopefully the carbon fiber feels similar/better than the Viper V3
I don't know man, the white zinc enjoyers are gonna get it and then after 1 day
they'll be like "huh... al this wait for this nice"
ordered in july đ
that's how I feel with my keyboard. It's awesome but it's like.... it's a keyboard
I love it tho and how good it sounds
Ordered in mayđ
Started, but I don't live in Europe so it takes a good month for shipping
Especially economy shipping
ya im australia hoping it's not too long
seems to have a good reception from the people who got the black ones this past week
What even is ur batch
idk eu brug
That's far as hell
lol maybe. I've just been waiting forever to try an HE board, I've only done custom mech in the past
i think these zinc alloy cases are the last to be shipped
Me too bro
Like mines 12 of december
r u in aus too
Nah
i see
ya i dont have official date on my tracking yet
needs another day to get the estimate i guess
i have no idea what that audio is
i have the same on my old keyboad xd
movie
love the lotus design, but the font looks a little hard to read
I have the tracker but it gives me no estimate, I checked the global parcel thing and it said 12 of december, mine actually got shipped to me on the 13 of november
I'm gonna try out the stock white key caps for a few weeks but I'm probably gonna reuse my MT3 caps in the long term
keyboard came defective 
damn thats wild
Unlucky
I have a theory, batch 2 is secretly batch 847282
forgive me asking whats probs a repeat question, but do the other colour options be restocked with the new batches? Noticed only black and grey PCR available for preorder now, not kept track to see if its just per batch
white zinc had issues with its coating so a fixed second batch is on its way
Frost only comes with the module version
At least you got a tracking number, where is my tracking number? lol
hence why itâs missing from the ordering menu
raw and frost are only available with the module
where is the option for on key press effect? iowant the wafe rgb base but when i click a key io want a certain color
Ig, but it is what it is
trail
got to say, the folks at wooting thought of everything. I am using this for both gaming and regular keyboard. I transitioned from apple's magic kb and love how out of the box it maps function keys to common controls such as volume down (fn + prt sc) and up (fn + pause). I thought I was going to need secondary utility or additional config, but discovered in wootility app that its already mapped đ
kind of want to get custom key caps that provide the visual mapping tho
I'm always impressed when Apple users finally try something outside of Apple products and discover how customizable things are. Glad you're trying different things
What's wrong with it
after a few hours, it suddenly shut off and i could not figure out how to fix it. I changed wires and used different PCs but it wont turn on
Oh wow, damn make sure you contact support about it, unlucky.
I emailed them 4 days ago. looks like theyre busy right now
open it up and replug the jst cable
ill need to buy a screwdriver that fits, but ill try it when i can
yooo these are fire
some ones i ordered nice :V
lemme get a video with that blue inverted ripple?
U
another day, still ready to pack đ
Just received my Tracking and Shipping info for a EU/Brug Black Zinc Ansi
it is currently 8PM sunday where they are but it looks like labels and footings are getting packed ready for monday courier
Guys any news about compatible cases for 80he?
None aside from the KBDfans one.
https://kbdfans.com/products/gt-80-case
I'll do you one better.
GT-80 Case It has been a year since the release of the Tofu60 Redux case, and we have received an abundance of positive feedback from our users. Following the launch of the Wooting 80HE by the Wooting team, an increasing number of users have inquired about a compatible case. In response to this demand, our team is exci
Thanks a lot!! Was waiting for this for a while
is that hard to change of cases ? I really want to but i'm scare to broke my keyboard
thx i'll see
tbf this case wont be out for a while ithink
it's okay i'm using a 60he i wanna take the same case with samen color but for 60HE
talk about this one
Sounds promising at last
yeah looks like they are preparing a bunch for monday morning shipping.
oh i see thx for information
there is a date for the white zinc v2 for the 80he or still unknown?
Where abouts you located?
some ppl here have already tested the mad68 keyboard ? the keyboard who is suppose to be better than the wooting for 30$
Sunny and clear



