#🌟│wooting80he
1 messages · Page 228 of 1
Similarly, keycaps and switches can melt or deform at temperatures beyond warm
cuz i wanna put my wooting onto my laptop keyboard
its the most comfortable but idk if it destroys the keyboard of the heat
How to repair during warranty period
Should be fine, but if your laptop gets painfully hot to the touch, consider putting a piece of cardboard between the keyboard and the laptop
it would not burn right? the cardboard?
If your switches or keycaps deform due to extreme heat this cannot be repaired and is not covered by warranty
Optimum is a long advert not a review channel anymore ( at least that's how I see him now )
Paper doesn't combust until 451 degrees F, which is far far above the temperature where your laptop would thermal throtle
What is covered under warranty?
https://wooting.io/policies/warranty-return-policy
Defects in workmanship and materials during normal use.
An overview of our policy for the Warranty/Return/Cancellation Policy
and at what degree will the wooting start to take damage
Thank you
ABS plastics melt at 105 C, and would weaken or deform about 15% less than that; 85 C or so
yo i just ordered the 60 he is it pre order or is it in stock?
but the electronics inside wont be the plastic right
https://hub.wooting.io gives you a delivery estimate
Access and edit your orders, connect your discord, and manage your Wooting account.
The electronics will be fine
from geonworks
How crazy would it be if Wooting started selling Geon switches 👀
That would be crazy 
451.. F..? Fahrenheit 451..?
Yeah I know I was just seeing if you knew the reference xd
😛

I am a cultured Mon Calamari
could you convince Akko to make HE Rosewood switches?
The full extent of the communication I have with Akko is walking by their booth at a trade show
So no
damn not even a look?
At Computex I stopped by and had some good chats
oh i'm glad there isn't some sort of crazy beef that i'm not aware of
Hey Mark, I have a question regarding the second email that was sent to white 80 he users. I’m unable to select an option, I’m not sure what was that for?
You should have the option to either release your order back into regular queue, leave as is, or elect to swap to black
when is the white zinc comming back?
Just selected an option now, but it’s still letting me select an option again once I refreshed the page? Did my option went through?
You're able to select a new option up through the point where the selection choice is executed on (in bulk) by our team
Lmao i'm soon in batch 2 with this DPD shipping
Ohh alright, in other words my option still remains the same despite page keeps reverting back to selection option page?
RIP
A week has gone tomorrow 👏 😆
just DPD things
Wasn't home and they didn't call so the package should've went to a pick-up point but instead it went back to the original shipping center to be sent to a pick-up point
Will most probably not choose DPD next time, really disappointed but it is what it is
DHL has been a nightmare for us too recently but it's still far from the hell that is DPD
I see
Particularly if you choose the option to wait for v2, then you will continue to be provided the option to change
Sorry to read this 😦
Ohh thanks for clarifying that Mark, yep I did choose to wait for V2. Is 2-3 months a guarantee time it will finish? Or it could be more than 2-3 months worst case scenario?
I think that DPD was more expensive than GLS also lol
If this is the case, white V2s would start being shipped out around January- February?
The ''Business days'' are staying true though lol
dpd ... it can be 3 or it can be 12 ... 😄
can't understand why i would pay more for any of the other delivery companies if i have no clear idea ... and why is GLS cheaper than PostNL ? 😄
BTMC is unboxing the 80he https://www.twitch.tv/btmc , can somebody from Wooting team help him out because he is a bit Pepega 
one of those things that we will never know
i choose GLS ... well my wife is working there, that's a first ... but either way ... the cheaper one gives better delivery times ...
but mine is only coming in january so ... i won't think about that right now 😄
All the other orders i've bought was GLS and thought i'd try DPD feels like PostNL would've been faster lmao
Yeah also i could go pick it up myself but i'm not allowed now that a pick-up point is chosen but it would be quicker for me to do it lol
i thought he didnt like HE
He had a goal to set 1k pp without a rapid trigger, he did recently
Now he bought 480hz OLED monitor, got 80he and some expensive ass tablet
lol
watching rn
yeah i saw that video
"how are these screws biodegradable" 😂
lmao
oh really?
yes
wait that is kinda odd
Like if he wants to use lighter switch for osu, he cant really do that
Wooting sent him
ah
chat is creaming over the 80he sound
Ye 3 l60, 1 l45. 3 l60 for broken ones and then the single l45 more as a test to see if you like it.
oh i see
80he bricks on stream
Attenention need help. Im switching my switches on my 80he do I only need to take off the top case? I should I remove it from the plate as well
no but it would be easier
so same concept in this vid? https://www.youtube.com/watch?v=WN_-GYLTfpY&t=5s min 2-4
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
yeah
Copy ty first time lol, adding my ggateron switches with new keycaps
https://www.techpowerup.com/review/wooting-80he-hall-effect-analog-gaming-keyboard/
Just dumping it here, seems VSG on techpowerup as written a review
Do it please so I don't need to pay 50$ shipping for raws
@lime falcon "theres just no pipe, where is the pipe" - BTMC
Raws? 
50$ shipping???
Yep
Can you give me a link
Everytime I try to look it up it's just random crap not even related to keyboards
🔥🔥🔥🔥
very exciting!
EU-Brug address confirmations and shipments should be starting within next 9 days..
Waiting..
damn so long? D:
Longer for NA
NA gets address confirmations by Nov 11th apparently
No clue why it’s so delayed
Might be sooner if customs go by quick
Any estimation when zinc v2 white will get release?
never
lol
hopefully i am getting the keyboard before the 15th but idk
i am just coping
Hi guys is there a problem with zinc alloy cases?? I have the plastic one on order and want a zinc case instead... so just wondering
after seeing some messages...
only on white zinc
only some people and only w the white
ah i see i want the black one anyway thanks
black is better
do you know how much more id have to play to change
and if you want to change case, it will take 3 weeks+ to get response and get it changed
support will send you the invoice
to change ur order? the difference was like 90 euros
or 100
ye 90
ive messaged them so just waiting now...
bro idk i cancelled the white zinc then i added keycaps then i removed the jades switches and then i re added black zinc and removed the keycaps
i am the problem
lmfao i know how u feel u want it perfect
it is perfect now
there is only module and case lmao
i could buy new stabs but my daddy @wanton frost doesn't want me to
yes you can buy them
but then i need to buy them myself
and if you do
you have spent almost 600 on your keyboard 💀
if you do the stabs + lube + shipping cost you are closer to 600
one of my friends sunk like 1k on his keyboard
damn
yh but @dim quartz is spending close to 600 for a keyboard that is not even going to sound that good
like you can buy a kb for 100 and it sound better
idc
you do it alr when you stfu
i like how when i watch a sound test video and all the switches sound nearly identical to me and the comments are always split between them
like tf are you testing
😎
Consider yourself blessed. You just saved yourself a lots of hassle and money
sounds like me 
But that’s just the entry level
I didn’t realize how it was possible for customs to be so expensive and then you realize GMKs are like 1/4th of that 💀
yes
Solid gold case when???
case and keycaps are like almost 1/2
And then you have artisan caps too
no special keycaps for me 
You’re right there’s not enough room on the 60HE /s
i was willing to spend a chunk on the wooting but not willing enough to spend 10+ on a single keycap
every second video i see of the 80he has spacebar pinging on one side of the spacebar
i hope this is fixed in batch 2
No need to go exotic materials. Check out Norbauer designs. You can see $1000+ for just the case 🤣
As many different Hall Effect switches we have, we’re sadly still at that point where Hall Effect switches aren’t diverse enough to satisfy people’s specific wants and needs for what is considered a good keyboard switch for them
But I like my exotic materials 😢
Is it really true though? No one has done a true A-B blind test
He can make it happen 😉
I am not joking 🙃
Brb just need to work for the federal reserve to print the money needed
Dude I convinced my boyfriend to switch from custom to a 60he and out of all the Hall Effect switches I showed him he doesn’t like any of them
So he’s not a HE guy
I like the Jade/RAW sound, but there’s also a few that if I had to choose them I prob wouldn’t go HE
Unless you’re purely working or doing other non gamer things, the sound wars between MX vs HE is overblown imo
Ik he switches can sound as good as mechanical we’re just not at that point yet :(
ii wiish peopple join vc
Not really sure if you can make a linear switch sound and feels like a normal switch though.
kkkk theen im leaving vc :: (((
It’s like trying to adding engine , rev sound on a EV
Thats the thing, before he switched to HE he was using linear switches
insert hyundai
And he prefers linear switches
Wait im so dumb why didnt I ask for help in modding channel
Maybe they might find the right switches
Do an A-B blind test
First with just the feel
Then with sound from the switches
I feel the casing will have a bigger impact then the switches themselves
Does anyone know when will TTC magneto full POM switch get released?
Lowkey i don't know why gamers complain about the sound of switches knowing damn well they'll have headphones on when playing
we also enjoy typing to ppl like you without any headphones.
And you’re assuming all gamers play games with headphones 😅
If you’re spending 200$ on a keyboard with 8k polling and HE I’d assume more often than not you’re competitive
That’s fair but I wouldn’t trade off a competitive advantage for sound
Just like how people buying dive watches with 200m water resistance. Only to flex in office?
There’re different types of competition in E sports. Not everyone plays at the top level.
That’s true
So people who care about sound more = sound guys 🤣
Fair, I’m not one of them
I get how something can sound nicer but I’d just rather have an edge in performance

It’s a big world out there and there’s always a product for you special needs
I rank keyboards sound and feels just like HiFi.
Many people gets lost in the chase…
Did the expected at warehouse for the Wooting 80HE change from 31st of October to Mid December?
They only pay that much when they want their keyboards to be chunks of metal
No reason for any board to cost that much
Idk if I’ll wait until late December to get my wooting for like 340$
Nah the window to get em in November was like 3 weeks ago
Me to bro. I was like aww now it’s too late to order. Then next day it changes to late December 😭
I’m good
Luckily i ordered Oct12th and I have an ET of 17-1st
2 days later people who were ordering were looking at December
I wish they at least said something before to warn people
Wait, how comes i ordered on the 10th and mine is 5-21, maybe you mean 17th november - 1st december?
Yes, 17th-1st
It's october 22nd therefore say 17th as an estimate wouldn't make much sense
Also you're EU im NA
well, yeah it makes sense xd
Imagine if you’ve ordered in March 😅
finally set up my 80HE. Was grinding D4 s6, didn't have time. Have to get back to it also, but I wanted to know. Is there a way to turn off RGB while keeping the lightbar on? There should be an option for RGB off without having to set brightness to 0.
Bro I ordered it on the 8th and I got an eta of January
Which batch?
Whale
and also which case
Raw zinc case
Idk about NA, sorry bro, but the other guy ordered it after and got an earlier date?
That’s what I’m sayin
If you’re the whale batch then you’re prob get Jan of next year
Yeah I am getting whale of next year
I just ordered mine and it says estimated delivery on January💀
The whales are ordering now lol
Looking to purchase the 80he, before I do is there anything I should get before hand? The keycaps section I have no clue what the difference is and not sure if I should get anything beforehand. Thanks
omg yesss .1mm actuation is actually .1mm. The Standard HE had a deeper actuation even tho it listed .1mm
?
the sensitivies are different. Same switches used.
we fixed that in firmware ages ago
testing it with my finger depressing the keys.
for all our he boards
yeah, but i never felt the changes on it. I think it was a PCB thing.
feels diff on the 80HE
i mean the sensors didnt change so
i'm still waiting for someone to do a sound test for the 80he w cerakey 😭😭😭
like a decent one
nah i'm good
my set should arrive either tomorrow
or in 2 days
what are u selling?
what's benefit of a cerakey? Just sound?
i mean they are ceramic
they feel good they sound good
ok cool, lol.
might try it.
Anyone know how to turn off RGB on keys while keeping lightbar on? I tried selecting all keys but then lightbar still goes off.
it's good that ur also paying for the material and not some overpriced design
no idea
and i still need to wait for the actual keyboard
Just buy the keyboard with the case material of your liking with the the PBT keycaps and you got yourself a good start
Sweet, thanks for the reply. Is it perfect stock? Or once I got it what would you recommend me look at getting after? If needed
black
the light color of chocie to be off
clever
cerakeys v2 green with white legends
i basically have no use for em
why?
No, I got most of the options and I am satisfied with it
oh lmaao
This is my pack
for how much are u selling them
what are the two cases?
flat
Perfect thank you. And last question now sure if you can answer or if someone else can but if I order today do you think it’ll arrive before Christmas?
ye i know
Frost and ghost
oh yeah i was gonna mention. Damn this zinc alloy case is heavy, lol. Heaviest thing ever. Sound typing and feel when bottoming out feels better than the HE though.
and the zincs?
i mean i don't think many people are interested in the green ones
RAW and white
i can try and look for a buyer if u want
na all good
worst case i bin them
NAAAAH
You will see an estimated delivery date before your check out on the website
use them 🙄
make it giga heavy
Sweet, appreciate the help brother. First time hearing about wooting and wanted to get this so thanks for answering my questions will order one tonight :D
unless the cerakeys magically become a fullsize iso compatible set i have 0 use for them. and given i checked shipping and import fees to the EU im selling at almost half the price
if no one wants em for that they can go straight in the trash
full set
?
cuz i got my A+B for 115
yeye i get it 🙄 u hate them
u guys are stalking it
i hate the fact that there is no way to get the 3 different caps to make it iso compatible
cerakeys look like they'd feel more like plastic than actual plastic keys, lol.
they look cool.
I think I know what they'd feel like.
No problem, you’re coming in to a big family of entusiast. There’re a lot of knowledgeable people in different channels. Before throwing more money in this. You need to get yourself a baseline. Otherwise you’ll just end up with a never ending chase for the next best thing.
id love to buy multiple cerakey sets and mix/match colors for cool stuff
but its literally useless to me cause it doesnt fit
I don't get that
Speaking like a true artist
like it would be so convenient for them
the lekker edition caps are godly. I wanted to bring them over to the 80he but I wanted to go yellow keycaps, so I bought that instead.
Yeah true, I was looking at the order and as I went through I didn’t know which keycaps to get as there was 2 options, just came here to get a few answers before hand. Can’t wait to get it
gonna miss those ones though. Best keycaps i've ever had.
exactly especially since its all normal caps sizes except the odd iso enter shape
so tony
you gonna be in lax making sure my keyboard isn't in a grocery bag 😔
I want a box
like they sell the 7u spacebar but not the iso enter key💀💀
i think way less people care or need the 7u spacebar
Better start touching grass (wood) then 😅
theyd need to sell an iso kit due to the print of the 2 new keys and the shorter left shift
but id happily buy it as an extra set
it just doesnt exist
they could easily make it a different set like they do with everything else
that's the story of so many keycaps sets I've seen the last few weeks 😄
but yeah i just think its bs and garbage that they call it a fullset but miss out on a simple compatibility thing. not hating on them for being ceramic caps or such
i placed 2 orders past 3 days on 2 80 HE everytime it gets canceled for fraud but not the card company no its wooting
the background service for RAM usage for the lightbar, where do I get that? Inject me some Wooting into my dna.
not released yet
youre not getting rejected for fraud but being flagged for potential fraudulent activities
placing more and more orders will just make the underlying system flag you more and more
read through the email as we suggest some points that are often the case for why these flags appear
if you tried everything in there youll prob have to reach out to us so we can maybe check on a deeper level whats up
😮 so close
So much easier getting the usb-c in and out of the 80HE vs the Lekker Edition HE lol
How do you find out what boat you're in?
Batch update #📦│batch_updates message
If you're part of this batch, then it's on CMA CGM OHIO
Ahhh me being big dumb dumb
My keyboard be flying first class not boating like a chump
Lmao
I couldn't stop watching today
If it goes in that little opening then we can see it go through
https://www.earthcam.com/usa/california/losangeles/port/?cam=portofla
EarthCam and the Port of Los Angeles have partnered to bring you live views of what’s happening in Los Angeles Harbor. Camera 1 streams from the center of the Port of Los Angeles Main Channel in San Pedro, featuring views of historic battleship USS Iowa, Wilmington Clock Tower, Everport Container Terminal, Terminal Island, and San Pedro Promenad...
the cam is at the red circle
hope it does
yall think they'll give me my keyboard if i pull up to the ship
You’d probably getting arrested for trespassing lol
i'll just ask nicely they'll understand
Plus you’d need to look through a lot of the cargo containers to even find the keebs
XRay 🧠
How good is the Ghost case for 80he? Trying to decide between Black or Ghost. I like the look of Ghost more but how good does it look with rgb?
Its good
when wil the store credit for the white zinc wooting be coming in...
Does the ghost have a delay compared to black or will they both be manufactured the same time? Ik the Zinc Alloy has delays
that review is so mid
I wonder which feature is not easy to use
no specific item has delays otherwise stated
Dks?
so rn for batch 2 only the white zinc is delayed i think
30 days after arrival
Or maybe fn layer
to prevent fraud
eh not sure
the last one was also email
I have idea
Lets ask website guy about it

They propably know if there is button to claim store credit
Does someone have a really clean picture of their 80HE that would make a good youtube thumbnail I may use? I will link ya 🙂
I don't wanna yoink that is why I am asking here.
If you have a nice clean one DM it to me 🙂
@distant parrot hey you propably know. Is zinc alloy white store credit automaticly added in checkout or i have to send email about it?
I waited from march and gone trough 2 delays
You can wait 1 montn
Yeah Yeah been through the same exact delays big whoop
back in my day
Can't believe the ship is almost close to the ports
Is the 80he supposed to be this hard to take apart I feel like I’m gonna break it
feels like breaking it = stop 🗣️
Make sure to follow the guide on how to take it apart https://youtu.be/LNa5wuqiFVY
This tutorial shows you how to assemble your Wooting 80HE module in one of our compatible cases.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our p...
Especially for the plastic case the clips can be a little tricky to unclip the first time
they should increase the on-board memory to 1 tb
for all the profiles
and games
It's been stuck there for a while..
Now it’s saying it’s at the Long Beach port?
hey i got question can someone help me?
Which keyboards are suitable for magnetic switches? I don't know which one fits because I want to buy my own magnetic switches
Tomorrow is HK batch address conformation
Not all keyboards are compatible with all he switches
how i know
I think it was a very fair review and well written.
I still regret not buying it in HK
You're fine ~
Wheres the ship!!!
If we're lucky, they might just open it on Friday. But that's borderline coping
It’s at anchor right now
Alright heading over
You’re going to swim over there? 
Mine hasn’t shipped yet it’s so joever
I wonder how long is the ship going to stall 🙃
tbh plastic sounds better then zinc
Yessirrrr
Pray to the geon gods
Imagine they open it today.
any jade max users?
@coarse crest used to liked maxes
Sanders also started using it recently
he committed a cardinal sin /s
:)
im using jade pros and they feel better than regular jades but they almost feel overlubed
he did?
i also got some which dont work properly with the 80he
yeah
Yep
He doesn't seems to like it tho
theres also this #🔧│keyboard_modding message
seems like the general consensus
Heheh
whats wrong with jade max it looks nice with my ghost case 😛
can someone recommend me cherry profile clear keycaps
the few batches that were sent out are hit or miss
They have a new purpose
a lot of people have said theyre sticky
I wanted to create a frankenswitch at some point using random jade bottoms, max housing, max spring and raw stem if it allows
and create the Gateron Raw
thats a lot of switches to buy
Thats why it wont be for now
RAWs with spring lube are the most marbly which I like a bit, the jade project will just be on the back burner when im bored at a future date
im too lazy to open the switches (i dont wanna buy a switch opener)
Might buy a switch opener
i quite like the stock raws anyways, havent had any issues
Sunk to deep
none of my switches have spring ping, i won the lottery
interesting. cant relate
I didnt notice a difference if you go full lube, but spring lubed adds a little difference to it
just going based off what others have said ¯_(ツ)_/¯
Be a bad ass and use a screwdriver
what switches u using
raws, im not buying switches at $1 per
fair
True based kb lovers spend $100 on switches
oops
bought too many keyboards but wooting 80 is my endgame

No peripheral is ever end game
bro let me enjoy my moment 😭
💀
aight time to buy another wooting 80
oh yes
When bridge zinc ship? 
If I dont create the Gateron Raw, worst case I just get a cheap HE and use the Maxes in a different keyboard for work so its w/e, but I do regret not getting the Pros a little more
Its with Atlantis now brother
It is if you end the game
Is it waiting in line or something lmao
probably
Really happy knowing its on time :D
live footage of the ship rn (real)
same, hopefully customs is quick
One of you needs to invent Star Trek transporter tech
Then you'd get your wooting direct from the factory to your living room
There goes my keyboard
Who knows lmao
Haha
I got charged for trespassing guys
Put white zinc v1 on there right? 
wait u lowkey cooking
ima pu to cali tomorrow
can someone send me the link where you check for your order
In the waiting hub you can connect to your discord account
looks like it

Is my 80he here yet
no
Goodmorning
Its right here bro
why do you have so many mice?
fetish
whaatt
why not
I'm the same, I have like 30 mice even after getting rid of some and the Stormbreaker Max CF whzy edition coming end of the month 
why would you buy 30 mice if your only gonna use 1?
if your average mice cost 50 dollars x 30 thats 1500 dollars
was always on the hunt for that perfect mouse tbh. Stormbreaker is it for me, the Max CF is just what I wanted in improvements. Been mainly using the OG since I got it when it first launched. Have been giving away/selling my other mice. I also mod them as a hobby so some of them are custom shells and paint jobs etc
most of my mice are also well over $50
don't remind me about that 
bro do i really got to wait till january to get, surely theres a way to get it sooner?
The only other way would be to search eBay or some similar site for someone who sells their 80HE, but it will cost you more
Or buy JIS layout, it is still available for batch 2 lol
now this part is cool about cerakeys. Think I might buy the yellow set, lol. Gonna read more reviews.
I bought a plastic nice PBS yellow set already for the 80HE, but willing to spend again.
sound seems loud tho lol
heavy keycaps I guess does that.
Seems like finalmouse superlights razers lamzus wlmouse more like 150 avarage per mouse
We all have fetishes
yea 50 is not average price lol
is this normal? i think it should be at 0 not 0.50 and im not touching anything
and it fluctuating from 0.49 to 0.52
The second one rn
Yeah i maybe buy new keycaps idk it's kinda boring after over a year
Yee kinda dislike rgb a lot but pudding keycaps look so soothing

Question regarding keydown input. I haven't messed with any sliders yet, just enabled Rapid Trigger and Tachyon mode for one profile.
I find it quite difficult to input only a single frame of keydown. Heck, the laptop's built-in keyboard seems to have an easier time performing 1 frame keydowns - though the feel and input rapidity is of course no match.
Are there settings I can tweak to make it easier to consistenty perform 1 frame keydown inputs?
What are you settings? lower your actuation point and rapid trigger
Yea thats pretty low, but I dont understand what do you mean exactly
can you explain in fortnite terms
I can't, I'm not a tiny babby anymore 😔
How about Smash Bros. terms? Not literally playing Smash Bros., but basically, I'm trying to do the shortest shorthop possible with my jump key.
So to do the shortest shorthop, I have to have the shortest keydown input.
for exact frames shitty keyboards are way easier
That reminds me, I actually have an ancient used Logitech keyboard that unfortunately got water damage, and the fact that its inputs were so scrambled is the only reason I discovered that shorthops can get so incredibly short
I bought these during kickstarter and they're fine but imo not worth it
is it worth it to switch from mechanical to he keyboard? i saw people say that they sound and feel ass
buy good switches and it fixes a lot of the sound/feel issues. it won't match a top tier custom mechanical keyboard switch but it'll be good enough, particularly if you play a lot of games that take advantage of rapid trigger
should i buy 80he barebone and buy other switches than lekkers?
A lot of HE keyboards aren't good stock. The 80HE is actually really good as stock, and I imagine it'll be even better with geon raws 
if your top concern is sound and feel then skip the lekkers and buy something like geon raw he for the switches
sound is preference tho
So is feel
no my concern is perfomance since i play games on high level lol
I'd say watch a few comparisons first
performance is good on both
Some people like tactile switches
switches has no performance difference
anyone that has a zinc alloy raw case?
yeah, what you need to know?
just preference in weight, sound, wobble all that
did you spray paint it?

thank you
nah. I might cerakote it down the line but not yet
how much is that anyways
too much. Like $200
whats cerakote?
but it's cheaper in countries that have too many guns lol
it's just a spray coating process
do he have tactile feel?
i have a holiday in singapore mid next year, I might drop by my case for a cerakote while i'm there if they can do it within the week that i'm there
Do you know if i can spray paint my raw case?
ya ofc
sure. It won't be as good as cerakote but you can
ah i dont really care than i can get used to the feel in a week or so
there's guides on youtube for how to spray paint
i dont need to sand it?
you would sand it if you want to spray paint
and then primer
sandpaper + primer
isnt sandpaper gonna mess up the whole keyboard?
no, why would it? it's just the case
you take the pcb and everything out of course lol
it does void warranty but just on the case
well i pre-ordered the plastic one and i'm just gonna upgrade it
first with the switches keycaps and then case
i think i'm going to do tungsten when i do cerakote it
oh ya a new 60he case is coming internationally
not soon
how many months?
no eta
that's interesting. Not my style but not bad
too industrial for me too
i want my raw zinc colored this
wow its peaceful today
i need a theme for my keyboard but idk what
a certain inflammatory guy may have been timed out for a week lol
How could they do that to mansen
I muted him after last week
what happened?
I forgot raw is basically just a canvas
this one
Mmm, maybe I can buy 2 of it and have somebody else paint it for me
nah raw is fine itself
Cant sleep
Wait i didnt even realise mansen is not on the server anymore i was just saying a random team member 
What kind of themes are their?
he isnt?
I just installed vencord for complete blocking
should go back lmao
he's on vacation for a week iirc
I know, but me want special color
it's fine lmao
it's been a rough couple months on the cs teams
mansen especially so
Why does aliexpress send me an email for every tiny shipping update 😭
and set this world on fire
If you say his name three times he appears and starts saying shit
mansen has been dealing with a lot of cs for months now
all the drama in discord too
counter strike

tbf he made himself main actor in dramas
he can be a bit sassy sometimes of cos
i wasn't even talking about mansen lol, wizard was just memeing
but he does a fk ton cs unwarranted
A break is nice

I know who is the actual person being talked about
the nicetohair guy was the one that got timed out for a week
I dont want to say the name cause as i said
i want this fully built aimed at my head
If you say the name three times…
pretty sure he has alts
he does
people just be too impatient, can't be patient and normal
volume knob key when
people who make discord alts just to spam same thing are such weirdos
fr just make a bot
Found damage on my 80he zinc case :(
owl labs 80he case 🙏
The numpad suggestion thread has been dormant since some guy got really really mad at me for offering one more use case that could make it more interesting to develop for wooting
i just want a alu 80 he
lol that account is quite sus. Appeared and created within 24 hours after he started getting timed out
< this is his alt
im actually the alt account
same thought 😔
What are cool looking color themes on a keyboard?
i mean, sky is the limit
i want to make a white case + tut manga keycap theme board but i don't have an excuse to make one right now
what color is sky is the limit?
black
i've never modded a keyboard before
so i have no idea what you are talking about
sky is the limit is an expression
oh
just means you can make a theme for basically anything
there are keycaps and colors out there to match anything you want
that limits it to only 1927820293839032 combinations
i can type blind and blank keycaps are alot cleaner
blank blue keycap is going to be a pain to find outside of niche places
there'll be aliexpress listings for it but who knows about the quality of those
you might be out of luck then because the only other blank blue i know of is cerakeys and that's heavy and expensive
i found some on amazon
Given what i have read above with support delays, there is a possibility i will get sent the switches i asked to take of my order with wooting
30 dollars
How do they normally handle returns?
those will be same ones as the aliexpress ones, so quality will be a question mark but if you don't mind testing them then that's fine
Can't you like take off the caps and repaint it?
just reach out before 30days
how long ago did you ask
idk they look kinda ugly
it's going to be questionable quality
2 days ago, my batch is EU-BRUG
2 options
that's cutting it close
then ill just take letters
either put it on hold or make a return (u pay delivery back if not in netherlands)
what are good blue quality keycaps that arent too expensive
define blue and define expensive
blue as in all blue? some blue? blue mixed with other colors but blue themed?
Ah, just checked that is an option and it will remain in warehouse and won't get shipped out until i say so.
expensive like 90 bucks
yup
blue mixed with dark blue
so like under $100 then?
only blue and dark blue? or are other colors okay?
Thanks, ill keep checking daily on the website and if EU-BRUG has arrived at warehouse ill click the hold button.
other colors are fine
because keycaps exist for a billion combinations lol
you could also not confirm ur address
that would delay it a week
Is the eu-brug already on the plane or it’s still in china??
Shipment to our warehouse
Your product is on its way to our warehouse
sno have you made a review on 80he?
there's like wuque studio mizu https://cannonkeys.com/products/ws-mizu
Designed by Rensuya, produced by Wuque Studio. The Mizu colorway is back, this time in WS doubleshot PBT! Coming soon to CannonKeys from July 18th to August 13th! The all in one Base Kit is extremely robust, offering split spacebars, ISO support, and 3-key 40s, and novelties! Also available during this group buy are koi deskmats in three differe...
It's either waiting for a plane, on a plane, or arrived at NL
nah i don't review peripherals
okay thank you
Can't really confirm but based on previous stream, should be aroind that.
sure. That's just one of the sites that sell it. You can look around and find places that sell that keycap set
if you google ws mizu you can find it on lots of different reputable sites
its a pre-order?
for some sites yeah
honestly there's so many options for blue sets
like if you want a softer look blue there's osume sets too: https://osume.com/products/winterglow-eve-keycaps
please note that due to packaging tolerances differentiating from batch to batch, we've determined that this packaging will have tighter tolerances and may be slightly difficult to open. we recommend our customers to exercise caution when unsleeving the base kits. winterglow eve inspired keycap set as twilight emerge
their are so many
yall can stop looking my mom doesn't let me upgrade my keyboard
Well they started the shipment process but it doesn’t mean it’s already on the ✈️😭😭
gmk prussian blue is 90 dollars I think
my mom doesn't let me upgrade my keyboard
Inspiration GMK CYL Prussian Blue is a custom keycap set to be manufactured in the Cherry profile by GMK Electronic Design GmbH. These MX-compatible keycaps will be made from ABS plastic and doubleshot legends (with UV front-print where needed). GMK Prussian Blue uses a simple color scheme with a GMK stock white (CP) f
I like it, it gives the keyboard "character"
Blue is a fairly common colour
Sky is blue, sea is blue, space can be drawn as blue
:(. I hope they respond in time to save me with any delays. I got Jade greens but ordered jade max's now from amazon US.
you can send us an email about this if you like
thanks, will do
Thank yall for helping! but i wasted your time and i'm sorry.
It's fine, im in discord all the time anyway
how tf this happen
maybe the guy at the factory was making sure it wasn't a chocolate replica
When ordering the keyboard do I need to purchase any of the items it takes me to after? Like the lube and the detachable wire
a cable is included
thats some shit, I wonder what actually happened to it
Okay good wasn’t sure, thanks
ngl i think the lube and toolset is a great purchase but even that is optional
like, I get chipping paint and all that, but chipping the zinc itself
Probably won’t change anything tbh just keep it stock
do the lekker v2 come prelubed?
This is all that’s needed right? I’m not missing anything
you are gonna get the keyboard in late december you know that right?
Yeah
Found a chip in an even weirder place
Getting it for Christmas anyway
oh oki
someone been going to town on it
That’s all that’s needed tho right?
Everything comes with that purchase
wonder what zinc alloy it is cuz isnt zinc brittle x.x
Edit: (a mixture of zinc, aluminum, magnesium and iron)
why wooting cant be like razer takes forever to get your keyboard🙏
mainly id say cause we dont have a warehouse full of the just announced keyboards
razer takes forever to come out with new products lol, they only announce them when they have warehouses stocked
Raised ticket on wooting hub. Keeb still works so its not super urgent to get a new case, but now that I've seen the damage... I cannot unsee it
should still fall under warranty, no worries! thanks for sending the email
They do
👍 Happens, sharp edges break so easily, and when evenly lit the damage isn't that visible, so I dont blame QC, they're probably under quite a lot of pressure to get keebs out
I guess I'll have a spare case I can do a funky mod with?
silver linings
Hmm... I could file down the corner to a chamfer (hide the damage) and then maybe get it media blasted
and then satin clear coat
when I banged up my case with a bottle, I just used a white oil paint marker and covered the scuff
it isnt visible unless you know where to look lol
Did the boat batch 2 na bridge arrive yet to la???
according to tracking link, its almost thjere
I hope the plane to the Netherlands is "almost there" too 👀
As long as there are no delays and I can confirm my adress on the 31st of October i am happy
even if it already is there it's still going to take time for their shipment to arrive at the warehouse
Packing boxes also takes time
But that's after it arrived in the warehouse
Wait for news next week
I don't think I'll need to check my mailbox this week. There's no news. I'll wait until next week.
1 week left before oct 31!!!
@thin glacier look what arrived
the photo doesn't show their true beauty
they are so blue
hefty bois
😋😋😋
thinking out loud but, is there the possibility for Wooting to release future new cases, both PCR (or similar) and zinc alloy(or similar) ?
ya ofc
ye
100% they said it
probably be collabrations/their own
i'm missing a great "plastic" or acrylic case. I know they will release the design files to third parties somewhere at the end of the year iirc ...
Isn’t Wooting doing a collaboration with Optimum 
yep - it's coming out 'soon'
60he 
80he collabs might take a bit longer though
but Wooting themselves could create some high quality in the future.
I really wanted to try out something good other than alum 😄 i actually like the pcr sound signature but its super flimsy ... 😄
perfect perfect would be acrylic 😄
-150$
how long does it take for lube sound to settle?
the sound profile changed drastically over the past 3 days
Would be cool if they made a 80HE case out of carbon or wood
this is the picture they have on there website. not sure how the brightness settings was but it reallyt doesnt look that much brighter
what is that website with the better shipment details? can someone help out a brotha?
When do you update the status of the 80he for the Eu-brug?
Are those the ceras or something else
#📦│batch_updates message this is the latest update
i put another win key bruh i didn't know what to put there
exactly them
wtf is going on the picture sent 3 times for me
really sends this picture
nope
Cerakeys?

maybe... maybe it sent thrice for you but at a cost
two unlucky people will not see the image
I only see it once
Ok so what’s next ? You said :
« Later this week, more information will be shared about the status of these orders. »
i am getting trolled
for zinc white?
for what color of base ?
if u have picture result i take it !!
absolutely
lol
indigo
zoom in
have you found a fix?
What do you think of Jade Maxes on He80. Are they a good choice?
this? #📦│batch_updates message
i dunno what to tell you when the channel got a message last week + a video
my phone can't handle it
how is it with rgb
like this maybe
we see more the blue on this one yes
i think i have rgb off on my keyboard usually lmao
do u have link on where did u buy it ?
on their website
u don't need full set
buy A set plus B set and ur good
for thee 80he i mean
oof i didn't know keycaps was at this price
Up until you get hit by the cerakeys QC
nah idc
they fixed most of their issues
and if u somehow get a shitty set u can just get it changed
there is still tho
my set is completely fine 🐱🐱
luckily
This is about the zinc case ? Not for the plastic one …..
the switches of this kb can't handle the spacebar tho
Im now confused on what you would like an update for
About the stage of my order ?
Sorry for my english
your hub gives you the best info or the batch channel according to watch batch youre part of
Maybe a silly question but if I upgrade my key caps, is it gonna change what batch I’m in?
Got the cheaper ones for now cause I was thinking about getting customs, but decided against it
Ok so we did’t get news since 14oct ! Ty
What's on Wootings shipping label? only the address to the person or?
little question, if I take this, do I will have everything to build my keyboard alone or I have to buy somthing else ?
you would need switches
and a ph1 screwdriver
oh yes i forgot to choice them, what is better l60 or l45?
entirely preference





