#🌟│wooting80he
1 messages · Page 202 of 1
there's only a very small amount of prebuilts that will have 10/10 stab lube in every case and most of those are basically hand assembled
if u are particular about sound, can always pay someone to mod it for u 
even his magger 68 pro or whatever, i guarantee you there's plenty of people who got one with less than perfect stabs too
Has anyone had a "thoccy" experience with the 80HE?
it's just name of the game for prebuilts that some come with a stab that needs a bit of work
my 80he sounds amazing but i swapped out and hand lubed my stabs and switches 
you should never ever expect perfect stabs from any prebuilt keyboard. If you do get perfect stabs it's a bonus usually
most usually need the old syringe trick
bro it's like 5 seconds and you just take the space bar off
Like i said, i can do it. Most consumers don't have grease on hand or the requisite knowledge. I just look at them as is out of box. The modding part will be separate. That way it's just fair
yeah that's fine, but like I said it's a really minor thing
i don't think i'd ever downgrade any keyboard because they came with a slightly underlubed stab lol
like even if you were going to say the magger 68 wasn't great because it had an underlubed stab i'd say the same thing - it's such a weird bar to have to grade any keyboard
I mean to be fair, this spacebar is worse than any of my kbs including razer 🤷♂️
Yah not hard to fix but still oob
yeah but saying things like 'build quality is way below' over a stab is kind of what the kids call 'delulu'
like I wouldn't even downgrade a razer over an underlubed stab even when every one of their keys is awful sounding when lubed
I didn't say that. He specifically asked about typing exp
my left stab on the spacebaar is although underloubed imho wooting should provice some lube in such cases
the bad build quality is chipping paint lol
yeah things like paint chip etc are real issues
underlubed stabs is something i'd not even mention in most reviews
i could care less about the sound, quieter the better.
i cream everytime i hit my spacebar
it's basically a non factor since every prebuilt will have bunch of units with non perfect stabs because that's how it goes for all of them
Wait, the paint is chipping?
i think you forgett the 300€ pricerange your moving in
glad i got RAW dog flavor.
if u hit the 1% jackpot of the deliveryman running over ur kb
what's your point?
in such a pricerange you can have some expactancies whichh are higher
for sure, but I put those expectations on the software, pcb etc - not on the lubing of a stab lol
my moonlander also cost 300 usd. it has way worse stabs than my 80he
you literally can't have perfect stabs in a prebuilt unless you hand assemble and lube every stab, which no mass produced board does, at least none that do it in large quantities
asus proviced lube with their keyboards around that pricerange kudos to that;)
even the asus doesn't have perfect stabs in every unit
that's the thing i don't think you're getting
Thats pretty much my approach as well.
It's why i also asked others here if theres was like mine
To see if its unit specific
if you have a way where every single unit will have perfect stab lube application then please share because i'm sure wooting would love the feedback
they're 100% open to improving the methodology for sure
i sayed you can expect to hafe some lube in that pricerange 😉 not to be perfect
the problem is how to do it at their scale
that's already how it is
when i buy a 9000€ leather couch i get a free takeing care set
they are already prelubed
my stone kitchen came with stone ttaking care set
expecting more from a product that costs 200+ usd should not be discouraged
this is how crappy overpriced products become normalized
i 100% agree, but it's also about being realistic
how do you get 100% non rattly stabs mass applied to keyboards
if you know a way then share it
you provide a "taking care set" ;:P
sure that's not a bad idea for aftercare, but that's still not having it work without any afterwork
since you can't that what premium means imho
and that what you can expect from that pricrrange even asus did 😛
asus provides lube?
yes
yeah their azoth boards come with lube, brushes, mini lube station
even the cheaper azoth which is about on par with the zinc 80he in price
no first azoth with lube was around 300€

okay yeah so we're talking $300 mark then
yeah i think that's fair, throw in a syringe of stab lube for $300
it's not a bad idea actually for wooting to do that in future
that's exactly my point or at least do to ppl who complain butconsidering delivery its cheaper to throw iot in for all
same i agree
i don't think the rest is necessary, but many a tiny squeezy syringe of stab lube in the box is not a bad idea
Exactly this
then just have photo like this for people who get a stab that wasn't perfectly done in the factory
now you get my point^^
That's for mass production engineers to figure out
yeah no. Reaper actually offered a realistic solution
Including grease + instruction vid/pic would be great as a 5 yr old could even do it
But this isn't the case here
yeah so it's a good idea for the future
i hafe my lube but only crytox 205 wich is not ideal for stabs but will still work
i wouldn't know, but i'm not in the business of providing those non rattly stabs to people
one can imagine if there was enough of a push for it the manufacturers would be encouraged to do more rnd in that regard (Norbauer had a sick presentation about but the cost is unrealistic) and find the solution
although i can see how it's probably a very low prio issue and the easiest solution is to just toss in a 1-2 dollar worth of lube along with the keeb + instruction on how to use it
It’s expensive to buy into a brand 🤣
Seems like that's what snojed used
honestly i don't think people realize how crazy it is that it's a realistic thing that we can literally suggest to the ceo of wooting to include a mini syringe of stab lube in future keyboard boxes
they can actually do that
Well that's definitely a positive that he's here and listens (hopefully)
i think you don't get the point the crazy part is that a small group of ppl delivered a product like this where the big ones failed
when people ask why pay $200 for a wooting, it's something they kind of forget about. This sort of access, insanely fast software updates, properly paid staff and devs, actual rnd into new features and add ons
that calder listns is just the sideprocut oif beeing a small company
Finalboy is also in finalmouse discord but pretty much makes empty promises
nah you don't realize how rare all of these things are even in a small company
i dont think many ppl will use the lube and it will just go to waste
most ppl buying wooting just want it oob to use and not work on it even if its simple
They can work the extra few $ into the price
i think that's the exact reason why people support wooting in the first place
like i'm willing to pay extra for wooting specifically because i know they'll do me right and i want to see more of it
that's fine, it's very low cost for wooting to do this
even if 9/10 people never use the stab lube, it's an insanely cheap thing they can add in
or for ppl who wants a perfect stab to just buy the kit and be prepared tbh
im willing to pay for wooting because mostly they deliver and don't hafe garbadge software
many will use it, spacebar sounds like ass? boom fixed in 5 seconds
the non realwhite LEDS are a bit dissapointing specialy with the alpha of wootility
many ppl are used to shit spacebar they wont know 
Well the kit is a lot of lube. In the box they can just include a few cc
but i understand why.. so theres that
a tiny little syringe with small amount of stab lube that's mass produced and thrown into a wooting box is a very tiny +$ to the actual price of a keyboard. It's honestly a great idea to include
it wouldn't cost them all that much to add in at all
yeah even if its cheap just sounds like a waste. but its a good way to start i guess
disagree. it's about a premium experience since it's wooting
also when we talk about syringes it ought to be like the ones you get with your cpu cooler, like 2g of it
considering that we got a free ls45 pack... yeah; by the way im using them to add my 70g springs into them
true i bought switches just for it to be wasted too 
mine went into the 60he instead of v1 lekkers btw, big upgrade lol
oh one tpositive thing THEY N AILED factory lubing
I find even the 60 heavy and bro is going for 70 🫡
lekker v2 are no need of lube at all
was considering 80 but i kjnow it will be too much over time i just hope 70 stop me more from botteming out
most switches that are factory lubed are great now, only the spring might ping a little
What games do you play?
All^^ but only the good ones im 40+ü and hafe a 2year old so no time for mediocere
Right there with you. Lately i mainly play Warzone and the finals
I just joined the discord - is there more white zinc order problem info somewhere? Other than what was emailed last week
started elden ring DLC great fun finished now im waiting for monsterhunter and want to play warhammer with a friend only the storey though
I'll probably pick up space marine 2 soon. I've been playing wukong on my controller but that game is so frustrating
looked to mainstream for me i don't like games whichh are too easy more souls
that's by the way the azoth kid^^
yeah i had the azoth some time ago, it was a really nice unboxing experience, typing on it was also great
board itself was great but i couldn't deal with the software haha
that's always crazy but honestly so faar wooting delivered a bit functionality lacking but great in what it does
for me missing are
- Ability to adjust brightness for individual switches separately or to create a second layer with independent brightness settings.
-Custom keystroke assignment options, such as assigning strg+c or Windows Tab, beyond just assigning an email program. assigning other programms of your choosing
-Macro support is likely available in a different software package, but so faar its m issing since "alpha"
Wootomation for macros
you can have individual brightness by going up and down there
closer to black = less bright
Thanks, there's a lot to navigate in this discord. I sent an email with questions, but it seems like response times are long. Perhaps you can help: If i wait, am i guaranteed a "v2" white case? Can i be sure that i get a white case by then or is there a risk you'll just offer a black one? (the email was vague). Also, if i accept the current version and I'm unhappy with it, and you make a fixed version.. then what? And can the store credit just be refunded? I ordered literally everything i wanted and the store credit is worth €0 to me.
haha im stupid ;:) so its jmust a gui thingy thx
and the software is like that
nah i have the same issue too, bad ux for the most part
i'd prefer it to be be better btw as it doesn't feel too intuitive, not sure how exactly, but it is what it is for now
yes but we hafe a saying in german "hat's like trying to scratch a donkey's ear through its asshole."
vercomplicated for sending STRG+C or wiondows+tabi sn't it? and nasty at berst..
DISCORD DISCOUNT
via ahotkey option`?
December so far away
with dks i need to set when at what deepnes my key is pressed that's overcomplicating a hotkey
its useful and great but doesent really substitute 1:1
ni sayed its like trying to scratch a donkey's ear through its asshole.
and that's it its overcomplicated and nasty
Will I have to click some buttons to confirm my delivery or the 80he will simply arrive at my doorstep one day?(Ive already ordered a while back)
Check your hub
I did, which is why im asking
in this menu are already somedumbed down things
its just missing there dude.. don't be over protective
If it gives you estimate then just wait you dont need to do anything
u will get a email to confirm ur address for it to be sent to fulfilment once ur kb reached the warehouse whenever that is
LOL?
Thanks
💀
I got 6-19th nov
viper v3 pro white or black cuz i heard theres a diffrence
white
thats really unlucky
white is just 1g heavier but has a better grip coating
but i use black with grip tape 
which would you recommend for say, valorant?
oh man I mean I will hold on to that horder and not cancel it, but when I bought it, it said "in stock" and now it says I need to wait until late november. Kinda sad honestly, was so happy to get a great keyboard in like 2 weeks but now its in 2 months x)
for dkjs you need to teach ppl and explain how it works while a dumbed down shortcut helper would solve that for most but yeahh,,., it spossible with dks and takes 10 times longer
bro there is literally a gram difference, just get white
thats on u if u have slippery hand, 1g isnt that big of a difference. or maybe which colour u like
ill get white ig
also ive never tried a razer mouse are they more calitative than the logitechs?
ive only tried razer headsets which have always disappointed me but their durability was good
Hello everyone! I'd like to order a White zinc cased white keycapped 80HE to Hungary, EU. Is it possible? I cannot find the white zinced case.
both logitech and razer build quality isnt known to be good but razer mouse specs are the best out there
viper v3 has better coating, better scroll wheel, better clicks, better sensor, much stable polling rate
not rn
mice ar ehighly individual some prever super lightweited some prever a lot of keys as example i sold my ligitech g604 for over 200€ just because there is currently no real replacement wich does it all
white zynk has paused sales for now
for my taste i love the roccat xp cone air
superlight already had pretty inconsistent 4k polling and they added 8k
i mean it better be good cuz its going to leave a hole in my wallet
💀
Already? :/ Do you know when they will sell it again?
razer latest releases are pretty decent quality wise, at least my experience with deathadder v3 hyperspeed and viper v3 pro
not soon soon
a few months?
wdym my logitech gpro has 1k polling and no dongle available
i didnt have issue with mine but its razer and the build quality can varies a lot
i mean superlight 2
not og
superlight 2 is such a scam man
yeah i have like 3 superlight, i bought one from japan and it's called logicool instead of logitech over there 
when you get it update firmware dont forget @verbal solar
Any way I can get updated when white zinc gets available again?
Thanks for helping btw.
the viper v3 pro?
yes
Old firmwares had sensor issues, new firmware fixed it
oooh okay
they updated it like 3-4 times since release to fixed known issue like lift off issues
and between the deathadder v3 hyperspeed and the viper v3 pro what would you recommend
one is ergo second is ambi
i need something a little bigger than the logitech g pro og and a little bit lighter with a good sensor and polling rate
if u like g pro shape, viper v3 pro is similar but the hump is higher
i like the g pro but the bump is WAY too small and ive always hated it i needed a bigger one for my grip
I am waiting for over 60days so i wouldn't expect ur order to get filled before my one
jeeez
ye, getting good qc with razer is easy though as you can just buy it in any local store and return for whatever reason (talking as someone from eu)
qc?
do u like ergo or ambi mouse better? deadadder is ergo and viper is ambi
what does ergo and ambi mean 😭
deathadder v3 hyperspeed is somewhat small, it's a smaller version of deathadder
viper v3 pro definitely bigger
yeah razer doesnt even want their mouse back and just sends a new one for my country
quality control
oh
infinite money glitch??????
just sell them and tell them its normal if the issue is not very noticeable
To the buyer
google it, its down to preference of how u hold ur mouse.
ye pretty much, in my case i can just drive 10 min back to store and exchange it on the spot
but if you're getting something like vaxee or pulsar, lamzu, whatever online it can be a bit iffy
did that to a lot of companys when i was 19 and didn't had much money .. now im older and yeah... you just be fair
ambi as in ambidextrous is like superlight, symmetrical shape, ergo is like deathadder that tries to be ergonomic so the shape is not symmetrical
how do you think igot the money to buy a wooting
superlight is symmetrical
oh yeah i just say the deathadder shape that is horrifying hell naw
guys where would I start if I wanted to get rid of the rattly part of my spacebar on the 80HE?
well ye, but it's kinda synonymous nowadays, no? barely anyone does actual ambi mouse with buttons on both sides
quite a few do
easiest would be to syringe lube into the stab
tape and foam under the spacebar
ambi definition has kind of changed usually just a shape thing now with "true ambi" being side buttons on both sides
make it less hollow
Does anyone know what this means?
more than 24hrs?
don't think its that since only half of the spacebar is rattling
yea im getting a viper v3 pro white
rattling just means ur wire isnt well lubed nth to do with foam or tape
oh than relube it and balance da wire
unless u meean tape mod in the stab
how do i know if the cq was bad and if the mouse had something fucked up when it was built?
Maybe, I don't know when it started like this.
wait a day then
where to buy, and what exact type
contact support
K sir
use it, if its bad there will be issues like bad tracking or whatever it may be
i know pulsar has one, and g pro, who else though?
alright alright, and if that happens i just return it and get a new one from the same site, and they SHOULD send me another one thats built right IF that happens
stuf like corsair and so on
also viper v3 pro white vs op1 8k? keep in mind i think the gpro og is a very tiny bit small for my hands
google i guess, i dont actually have a list
try viper, op1 small
ask them
i read the product name like 5 times
razer viper v3 pro or am i tweaking?
is it the mouse yall have been talking about?
its just on sale, they are same
bot many popl want white it duiortys fast and looks only cool on a fulölö white desk tsetujp
those pages are resellers they adjust price on request and offer prinziple
what
still not many, like steelseries had some, but even that is gone now
ooh
let me translate
so they make sale for the stuff they hafe more stock in this case white sells less good
"not many people want white because it gets dirty fast and only looks cool on a full white desk setup"
but white is better tho 😭
do you hafe white wooting 80?
its otw
white has better coating
i dont have white wooting 80
why are you asking about wooting
i bought black zinc alloy 80he
i dont care about the looks of the setup
well he says its better;) just hoped he gets why its sop hard having white all the way:P white always causes trouble
see wooting g and it doesent even sell as good as black
i have white viper for like 5 months
had 0 issues
what troubles are you talking about
try to get the hole desk setup white.. than you know
monitor arm stand mat all should fitt and look good hard with white easy with black
we are talking about mouse
Anyone else experiencing coil whine on their 80HE? Sounds like its coming from the middle of the PCB

coil whine is normal in electronics. can get rid of it by lowering brightness
Yes. Newest model
Looks like about 70% is where it starts becoming quite audible - Will sit at that for now and see how it holds up
yeah i hear it as well around 70
Validation 

Does this situation need to be resolved or should I just wait for them?
It - should- self resolve, but can't hurt to reach out to use via the hub for support just in case.
The fulfilment center has to pass the correct paperwork on to FedEx, and that's digital (Not sure why they don't include it with the physical box)
so what can I do now? wait?
it stuck here alrd 5 days
wait
understand
They include a physical copy with every parcel PLUS send it digitally
So they're just incompetent. Well I guess that's par for the course 😄
Every parcel carrier ever 🤷

Not yet 
how do i control light settings in v5 i want the keyboard to be on for longer
oh i found it nvm
ah damn so light settings are global now not per kb?
or maybe it always was lol\
I eant to get a pegboard and hang my 60HE UP
4.4k oof. rip US fulfillment center
Which light settings
By light I'm guessing he means RBG
Thank you captain obvious. I was asking what specific setting they are having issues with.
Alright imma just shut
no way
Stop digging my grave plz
any lube/syringe in particular I should buy for my stabs to stop it rattling?
He wants rgbdeez
Thanks for the early AM laugh
What a mess - I wonder how much this will end up costing them and what liability the logistics center has
tbh i was thinking the same thing , i was like " fuck bro thats gotta be one expensive fuck up"
There is probably an epic corporate battle occurring blaming each other for the fuck up
I want my 60He to be on longer than my 80he. Just gonna use the 60he to be a nice display kb
True but replacing a couple thousand switch packs can’t be cheap either
On longer? You mean the dimming setting?
Yes
Dimming/sleep
I thought i could set them differently or at least i remembwr my uwu and 60he being seperate dimming settings but i probably misremembered
Hmm... not sure if we can detatch that from a global setting. But it would be nice.
If you ask in #1141096226884956181 the team might be able to make it specific to each device.
Thanks
someone told me that this here dims the rgb individually
closer to black = lower brightness
Lol
they can maybe sue for damages?
Thanks but i meant i want my 60HE to go to sleep later than my 80HE.
in the settings there is an option
settings>keyboard settings>rgb sleep mode
had a trip and fucking raw shipping still not started
I have spent two days now with the 80HE and it feels so premium and looks/sounds amazing. My biggest issue is trying to figure out the right actuation points for my superglides on Apex lol. My 60HE settings don't feel the same, and I'm not hitting them consistently.
I'll take that as my only "issue" so far 🙂
oct 8th lmao
That's global. I was asking about per kb. I submitted a suggestion even though my use may be somewhat unique. I could probably find some cheap pc or pi and hook the 60HE up to that
Wouldnt mind hanging up my old SS apex pro up either
isnt that per kb? did u choose the kb u want to change or maybe try disconnect one and setting each board by itself since its saved to the kb itself.
pretty sure its different because 60he doesnt have 8k/1k polling rate setting in that tab
👍 nice
hey a bit of a dumb question but is there a way to press Scroll Lock in the wooting 80he
Sure. Bind it somewhere.
Can’t update anymore 🥲 nitro limit
Not really relevant either way - We need to reach out via the hub for support.
True
At least it was a fun game to pass the time for a bit. Like a Where’s Waldo?
oh alright thanks a lot 
Fr lol
Calder got to see them so maybe it turned out helpful lol
I've been passing on photos aplenty. 🙂
Would there be a way to fully lock Windows key (4mm not being enough)?
there's key lock feature somewhere
Good idea, that's what I'll do on my game profile
you can put it in the fn layer and it disables the key on main layer
so has anyone in america received their wooting 80he yet?? this is crazy how long this is taking...
Yes?
How!? I was the first 2 minute pre order 7 months ago! Why hasnt mine arrived?
What does your order status say on the hub?
literally the most basic order available, should of been first batch shipped
Going to bet it's the switches that's holding it back.
those were literally default, i didnt get anything special.
It's a separate item. Feel free to reach out to us via the hub for clarification.
this is actually crazy others already got theirs in america and im stil waiting with no addons, all basic, first 5 minute pre order
Yes. Got it yesterday. 1 week after confirming address.
hope you love it, honestly lost so much hype in this launch because it took so long
dang lol
i also received my wooting 80he black zinc yesterday
paired it with the GEONS!
Yeah it’s great. When did you confirm your address?
my favorite moment was when we got announcements that we are ahead of schedule, most troll thing ever for early supporters
Given the issues with NA warehouse shipping isn't it kind of a blessing that yours is sending 1 week late
Ready for my he switch confetti bomb haha
and just to confirm, you did confirm your address right?
🤷🏻♂️ shit happens. I received mine on the correct estimated date Wooting gave.
(fuck UPS*)
because the status in that hub doesn't look like an order that's confirmed address
That’s what I was wondering. If he didn’t confirm address it would delay it.
it should say something else there like queue'd for fullfillment if he confirmed
it sounds to me like he didn't confirm his address, so his order has been left waiting until the auto confirmation would happen on monday
Yup.
given the sudden silence i assume we've hit the realization part of the segment and now he feels a bit bad flaming wooting
Yup. 😁
the funny thing his mistake was good because his order wasn't sent out with the initial mistake batch that didn't have boxes, so now when he confirms he'll get a box
True he probably won’t have switch confetti
go in remap and click right mouse button on win key
if you want to disable it completely
Fn+win
just rebind win to something useful
Mine is being shipped around December so I guess that's a plus side of me waiting
USPS taunting me passing my switches over to every major fulfilment center/warehouse in my state bruh 😭 💀
Will we get any updates on the next batch?
Sure - When there's news.
wdym the new batches are in a box, i wanted switch confetti :(
Did you wrong them in some way?
Confess!
Someone should check on him
thank god usps was doing my delivery
Access and edit your orders, connect your discord, and manage your Wooting account.
You'll have to reach out to our support via the website. Discord does not have support.
okay thanks for your help
Batch 3 will come in box instead of plastic bag?
The remainder of* Batch 1 will.
And so on
Oh sorry, i think I'm mixing batch and group. I just want to know if raw zinc module for being in the last group will get in box xd
If you haven't already got tracking information, your order is not part of the 4000 something that were sent in poly bags.
So you'll get it in a box.
Who ping 
everyone dont get upset with the confetti switch bomb, Think of it has halo skull grunt birthday party.
Whilst working on a project I needed the sound effect of the GBP Skull in action and I couldn't find a good one so I ended up capturing it myself. So if you need it as well. Here's the one I was happy with.
The children cheering sound is from a sound effect library created in the 1970s. Which is why you can hear versions of the GBP skull across...
Guys did you hand lubed the Geon Raw He switches ?
do i need to replace the stabs with the one provided in the gateron jades?
I'm going to
i got mine in a box btw
Only if you use some third party keycaps where the keys fly off if pushed on the ends.
i am using wooting keycaps, so not required i suppose? is there any benefit in replacing the stabs on wooting keycaps?
Not required
thank you
Man. Mine comes today. Said UPS entire time and now they transferred it to USPS??? Expecting even worse treatment of bag now
how we feeling about the 80HE?
Welcome to the US. Where couriers love to abuse the fact that USPS -has- to deliver everywhere, and they can pass on any package they don't want to bother with.
hello everyone
im happy with mine. i use it daily 
I kind of disappeared from here after I got my keyboard and I haven't been able to share my excitement but this keyboard is so chef kiss
I'm glad I waited from March. It was worth it all the way
I swapped the switches to jades yesterday and I love them.
Does 80he zinc comes with instaled keys cus in my order says no keycaps🥲
yeah I love mine, I swapped the keycaps, but this zinc alloy black is so nice and quiet compared to stock 60he lmao
why dont we change this to ' fuck u raw' for raw zinc users
Depends.
Did you buy a preassembled ANSI? Then yes.
I am now unsure if that came the way it did or it was my own doings cause I didn't check before
instead of adding 1 day everyday
I'm sad it has a slight scratch on it though 😔
So like 2 people out of batch 1 will get it in a box?
is there anyone that would know how to cover it up the best?

I'll look into both ty
This is what it says
Unless you specifically added keycaps (and they show as a separate item below), then you're not getting any keycaps.
No.
It says you’re getting a wooting keyboard
With no key caps
It says you’re getting a wooting keyboard with key caps
It comes with keycaps but you need to install them yourself
Well there you have it. Like I explained keycaps are separate. So you gotta install them yourself.
so he could just order a set of keycaps and ask support to merge it?
Oh well good luck to me hopefully i dont fuck up smth
the keycaps come in a seperate box, need to be put on the keyboard
Why not just buy an assembled keyboard? It literally comes out to be cheaper lol
They DID.
pain
impossible to fuck up
I see his order
This is my order, it’s already assembled and comes with additional keycaps + wrist rest
First time doing it, this is the first keyboard i ever bought for myself, rest was from offices like 30yo hahah
His is different
oh damn nice you got both colors
do u like black on black or white on black more
the quickstart guide has reference pictures of different layouts you can use when putting on keycaps. its very easy
Thank you sir, the white keycaps with the black case is going to slap
Since Y'all keep insisting on backseat working for Wooting...
ANSI is the only configuration where keycaps are preinstalled ever. You -cannot- purchase ISO or JIS preinstalled with keycaps.
Ohhh
Anders will have no hair by the end of today
So i disnt fuck up and order extra set of keys
no
Correct. Your order is perfectly normal and "correct" for ISO.
You just have to put those key caps yourself

🥲🥲🥲🥲🥲🥲🥲
Can ducks have beer?

Anyone
The 10-20 day shipping option is looking hella realistic 🥲
i think mansen prefers pepsi as per this emote: 
Pepsi gud
keycaps will take u like 2-5 min 😄
Worst part is they’re all 45 mins away from me and they legit refuse to put it out for delivery
Man this keyboratd plus deathadder v3 pro should feel amazing
it was super easy I just struggled a bit with pulling out the switches since it was my first time
I can see myself climbing ranks in cs
I was nervous to break them
Hope for the best that i do t fuck uo anything haha first time doing it
I mean, house = warehouse
It's like lego 😄
I wouldn’t over think it. If your skill isn’t already good… you’ll still suck bro
Truth hurts 🥲
I climbed out of gold on sht laptop that was goving 50fps
it will help you but you wont magically get good
if you like your equipment, you will enjoy game, enjoy game means moar skill gained
So i have some hopes❤️
@buoyant solstice how long do we have to decide on the white zinc wait/send question? And how long are the support request response times approximately?
Thing is my equipment is shit
its arrived!!
Tbh the thing is equipment will help you when you’re at the top 1%
what are you using currently?
The thing that makes you actually improve is game knowledge and thinking as you play
I’m also pretty medium in my games ranking between gold-diamond
My mother gave me a keyboard from work that they replaced so its around 15 years old and not even branded 😅
@buoyant solstice so did an email go out to NA purchasers that hit the poly bag shipment. I thought I saw Calder say they would let people know. Very curious to see if I get ploy bag or box today.
But that’s because I acknowledge I’m not properly analysing my gameplay as I do stuff
I’m just playing zombie mode
uhhh, yeah, gonna help you somewhat with speed I guess
Goat
Yes I believe so.
Brainless gameplay 
125-500hz to 8k hz gonna be huge
Is my way to play
We shall see hope for the best ❤️
The funny thing is your brain also adapts to the latency, now that things are bit quicker your brain will need to get used to those reaction times as well
And mouse im using is also around 10years old
anders is the production of white zinc cases in badge 2 still paused?
Only thing i know its like 200 grams in weight and verly low dpi
Not my area. If there's news to be shared, it's in #📦│batch_updates
Thing is het frustrated about is my mouse jumping over pixels
I'd say you straight up need a new mouse 10 year old mice has seen enough

A lot of accounting😅
I belive i goggle it and it has around 80 dpi
@buoyant solstice did anyone ask you how you doing hows your day today?
ideal for cs
Okay thanks. So if I didn’t get an email it may come in a box. I’ll let everyone know
I'm excited for this ;=;
Keep being excited cause your order won’t arrive till next year if this is how the US is being treated
Can you please poke the responsible people for some better information about the white case options please? Like a detailed description about what happens if you choose to wait, decisions on a v2 white zinc, options about exchanging to a possible v2 case if the current white one is not acceptable and all that kind of stuff.
Those people got an email already
With a video at that.
tbf. theres a bunch of questions left open, even after the mail and video
Then I encourage you to reply to the email.
I think it’s like, you keep quiet and accept a 40 dollar ransom. Keep quiet and get a v2 white case when it comes out, or get a black case on batch 2
@daring crown
why are you people being like that
you get offered a fucking 40 dollar discount and call it ransom
make everyone else who asks question look like a fucking idiot as well
That was in purpose
I'm one of those people and the options are "get it now and maybe its fine" or "wait and maybe you get what you ordered, maybe we offer you a black one". My choice is the best quality i can get, but that might turn into a black one, which i don't care for.
Prob cause that question gets asked daily, but I understand where you’re coming from
Anders has 10 hairs left after today
all of them white
I did, but you write on your site that you are at 1-2 month response times.
Why not make it 1-2 years, if you're adding hyperbole?

Imagine having 50k emails with 6 people looking at them
I do agree that the options in all honesty sucks major balls. In my opinion 40 dollar gift card is peanuts for a case that costs 200 alone. The option to wait another 5-6 months is also not acceptable
But that’s just my 2 cents
would you rather they give you nothing
if it gets delayed you'll still have to wait longer regardless
😍😍😍😍😍😍😍😍😍 I’m in love y’all! I can’t wait for yall to get yours!

The reasonable solution is a refund of the product and get another case in the meantime. Once v2 option comes out offer it at a major discount to those that returned their case
That’s how you truly make it right as a company, but wooting might be too small to take that much of a loss
I'm getting mine Monday and don't even have a PC yet. 🙏 265k
On their zinc cases
For now i'd really just like some clear communication about what the resolution will be
yeah there's likely limits to how much they can compensate
So any switch experts out there? What better Jade, Jade Max or Geon Raw. And why?
and people are quick to take this stuff personally like the products are delayed out of spite, this shit sucks as much for wooting as it does for the end customer, and they're main prio is delivering the best product possible
from what i have read on here, raw he switches offer a similar sound to jade switches, with a tighter housing which means less wobble, also generally cheaper than gateron switches
Imagine waiting a year and a half to build a PC. Adult ingredient sucks
She has arrived! Safe and sound!
Jealous -.
You'll get it soon man! it'll be worth the wait, tbh i dont really trust anything Hippyo said, he was dead wrong lmao
Facts. Probably the downfall of being so open and transparent on this stuff. Manufacturing and designing takes time
And we as costumers we sincerely could care less about it and all we care about is “I WANT MY KEYBOARD NOW”
yeah I mean with any other manufacturer you see a product announced, go on with your life and then one day the product is on store shelves, you're not getting the backstory of how it got there and all the hurdles and headaches that came with it
Right, they keep us blind on the 1-2 years of development hell, and production
They just tell us “hey gamer, get our new product next month!”
No one's being kept in the dark. Dear lord.
i wont call it a fking downfall 
I’m talking about other companies that produce product, not wooting

I also thought I messed up by not going with the zinc because i like heavier keyboards but the ghost has a lot of weight to it for a plastic case.
Board is full of conspiracy theorists. 🙀
In 80he founders list page. Is this sorted in order of purchase?
Random.
^
oh shit, thats true
you can hit ctrl + f
to search for your name if you want
Then explain why Anonymous is the 1st one on that list if it’s truly random
Checkmate
Hit F5

If I refresh 23355 times, my name may appear in the first
I received an email requesting cancellation regarding Wooting.
I want to fulfill the order without canceling it, but should I not reply?
You should reply that you want to keep the order.
Okay thank you
maen
One day they will give us an update for batch 2
😔

Asking again :), any new regarding the RAW cases?
Hopefully in the coming weeks. My guess would be that production will be finished in about 3 weeks, then shipped to the warehouses to arrive on October 31st (at least in NE). This is just speculation however
You're in the same situation as me. Pending.
yup
I hope the delivery schedule is not further delayed due to the hold. 😫
most prolly wont
Is champion before bridge?
Was confused By naming because of first letters being B and C (unless that’s by accident)
bought it knowing i'll have to wait a month or 2 so no rush
That's good 
im super impressed with how great this feels compared to my 60he out of the box... this is just... mmmmwaaa chefs kiss!
Yes.
Just the right amount of cyberpunk.
this factory lube feels just right too... diddy approved id assume!
They've already communicated quite a lot regarding this imo.
The main upgrade will be to make it MORE DIFFICULT to scratch the case if possible. However, it is still paint as white cannot be anodised so it will remain a possibility.
It's not going to have upgraded internals or a refreshed design, they will probably discuss with the manufacturer different paint options considering this issue has arisen.
Basically, no matter what v2 - v100. if it is paint and you are dead set on scratching it, it will scratch.
it's just physics
This was the case with mine... but i just shoved all the switches back into the jar it was meant to come in
should I be concerned? granted i havent tested them or anything
visually the appear ok
wait, this is not regarding the v2 lekkers lol
it's regarding the v2 white zinc case
ok i just realised my copy pasta didnt carry over.. .this was regarding the additional switches
i'm hoping my module 80he kit came in a box and not in the bag.
heya, what about black zink? all good or also easily scratchable?
i'll find out monday
yeah mine came in a bag, and had the switch explode jar thing going on... but it doesnt seem like a massive issue, although i havent tested any to really know
I'm not expecting physics breaking products, i just want better information about my options. If a better version is made that deals with the issue in a better way, then that's what i want. The current information is vague and I'm asked to make a decision.
i got mine yesterday packaging was in that god awful bag but nothing was broken
fingers crossed my jades aren't exploded and smashed
I didn’t notice any issues, although I’m not taking something and purposely scratching it either.
The current information is as clear as it gets.
They will try to make a v2 that is more scratch resistant but will still scratch ultimately. What more is there to say?
Are you expecting a mohs hardness scale test or something xD ?
This is coming from someone who ordered the white v1 btw and had to deal with the v2 scenario as well, so I'm not just chiming in for no reason just so you know
yes, this is only for the white 80he
idk about the black zinc, but if it is anodized then in all likelihood scratching it will be much tougher
the keeb has a small black dot on 3 led blocks. While installing the module, i did not find any dirt on the leds, the diffuser, and the rubber block.
yeah i'm not real worried about scratching on it it's just gonna sit on the desk not like imma take a dremmel to it
white zinc owners, if you want to be safer just don't use a wire puller, get one of the plastic ones
The problem is that there is no information about what happens if choose to wait. The current communication is that maybe a v2 is made, maybe im offered a black one instead. I don't want a black one, but if i wait, i guess my initial option of accepting the current one is gone? Maybe? It's not communicated.
In the option to choose to wait, it informs you that it is a final choice if you choose to wait, though those specifics are best dealt with support.
Also, what they've communicated so far is that they're set on making a v2, it's not up in the air. I'd imagine based on Wooting's track record that if they run into problems with a v2, they will simply give you the option of reordering a v1 knowing the potential "downsides" of scratchability of white paint.
But from what they've communicated so far is
a) they're aware of the problem
b) they're actively working on a v2, so if you wait, you will get a v2
if v2 runs into a snag, guaranteed they will communicate that and further options
I'm not out here trying to glaze a company lol
but we have to give credit where it's due, they've been pretty diligent with their communications to us
or maybe I'm too used to valve abusing me while I wait for dota 2 communications
they def react pretty fast to things when they come up and do thier best to make it right
The way wooting does things is why i threw more money at them. I'm just left with a lack of information in this case. If there is a definitive decision that a v2 will be made, my choice is easy.. But what i can find is that they are looking into possible options for a possible v2. Please link me stuff if there was something made public
I chose v1 and hope to get some discount when I buy v2
This is in the batch_updates channel

cant wait for the batch 2 update this month
Is it possible to set a specific color for the led lightbar?
Sure
Volume knob when? Hehe
I want to change this to green if possible
Just wait for 3rd party cases, Im sure some will have a volume knob
https://www.youtube.com/watch?v=kx6vTEtwZ50
PERFECT 80HE VIDEO SO FAR
안녕! It's Mikey Here! Today I finally got the Wooting 80HE video completed. I apologize the video is incredibly long, but I promise it will be worth the watch with modding and all the popular switches tested in the new board! This video will include mods + sound tests with the popular switches and the newest Gateron Jade Max
Sound Test done with...
click effect studio, chenge the effect to solid, pick green
thanks, been struggling with this for a while 😓
Gotta change the colour of the profile.
Because you're using profile indicator as an effect
how do assign a profile to an FN key bind? I can have 4 onboard profiles. but when pressing the FN key, i can only choose 1 and 2. how do i assign to 3 and 4?
right now the only way i can swap to 3 and 4 is by using the wootility app.
Binding keys
Ill pray the courier doesnt explode your switch box 
KB will be fine tho right ?
In most cases id say it should be
If something does happen however, make sure to take pictures and send a report to support 
thanks

every picture i see of the box
it’s almost destroyed
💀
lmao yea they packed it in a bag instead of a box
my lekker switches box is squished a bit as well.. hopefully none of the switches are broken 😅
same thing for my friend
hopefully the keyboard is fine. mine was at least 🤷♂️
Yeah, US warehouse screwed up big time unfortunately by packaging them the way they did
Hurts to see 
R u in Vegas
yes
Are you zinc raw module?
Got my 80HE today. Polybag. Lots of holes and tears in the bag. L45 switch tube and box blown up. Lid of tube broken. I received all 90 switches but three of them had broken plastic pins. 80HE box okay. Not as bad as some but dented in on corners etc.
Yikes
The keyboard looks good. Travel case good and did its job.
has a list come out for all possible cases that could work for the 80HE ?
Sure.
US shipping companies playing WWE with their packages ig
Daiyummmm
UPS get package when zinc raw cases come in on Oct 10?
They already have it.
Just haven't scanned it in yet
wtf what was that note in batch updates then?
Dunno. You don't have a tracking code till an order is packed and out the door.
Ok cool thank you
same ):
yeah mine was pretty beat up lmfaoo
Anyone else have to replug everytime you startup pc?
No? Mine works fine. Did you update?
anyone had this going on???...I have this feeling that surly not good... It was saying before that it should've been delivered Thursday, October 3rd.
My question is: if the package deemed lost... will a new package will be shipped, or I have to wait for the next patch (which sucks if that is the case) . bc I do not wanna get a refund.
There are 3 dark spots in 3 of the led blocks. It is difficult to take a good picture of it. Easy to see in person
running v2.10.0 firmware
Better pic
Is it worth getting the zinc alloy keyboard or just stick with the plastic? What’s the difference?
metal is sturdier and heavier.
quality
The PCR has a deeper/more muted sound than the Zinc, I think the zinc sounds alot better but I am a metal supremacist so take that as you will
Weight, material, and a carrying case. But tbh the plastic is on par weight wise with other aluminum tkl boards. It feels the same as my Steel series
@topaz flare
check this out: @4:35
https://youtu.be/s6mXayOwi6w?t=275
maybe this is the issue
Finally taking a look at the new Wooting 80HE. This finally gives us a form factor closer to what people have been asking for along with some other improvements that result in less customization than we've see on the 60HE. But do you NEED to mod this board? And is it still best-in-class now that so many other hall effect boards are out there?
✅...
Theres also a couple different sound tests comparing PCR/Zinc so that should give you a decent idea (although wont be a perfect 1:1)
Same thing happened to me before with USPS. I doubt it’s lost just give it time. It says running late so most likely they’re overwhelmed with packages. Probably because of all the people panic ordering when the dock workers went on strike. My keyboard being delivered with ups is also delayed. It actually came here and then went all the way back to California. It’s currently on its way back here but also running late.
Alright thanks. so basically the material only changes how it sounds and not the performance of it right?
Performance should be the same
No performance change.
correct. Sound and build qaulity
Alright thanks everybody
https://www.youtube.com/watch?v=wYACSlhQg9E&t heres one of the videos in case you're curious 🙂
Time for custom switches! I tested the Geon RAW HE, Gateron Jade, GUGU Black Knight, and our very own Lekker V2 to compare their sound profiles. All of these switches are compatible with both the 60HE and 80HE.
Lekker V2 L45 https://wooting.io/product/lekker-switch-l45-v2?Size=70+pack
Lekker V2 L60 https://wooting.io/product/lekker-switch-l60-v...
i'm just watching my keyboard get closer to me and UPS adding more time for the delivery date..
atleast i get time to keep designing what i'll engrave into my zinc black case.
thank you
how so?
to the point where it bluescreened my pc 💀
either that or my usb ports are all messed up
It feels like such a kick in the balls getting batches switched and order delayed for a whole month because of a free thing you got from a preorder. Should've been mid November. Have a friend who ordered after the preorder, he's not getting the lekkers and his is ariving a month earlier
save up money for zinc
you should contact wooting
already did
my question is that is it worth getting it over the plastic
it depends
quality wise i think its better
but its up to you
the plastic will be lighter for transporting. so if thats a factor..
hey i just updated keyboard
now some keys are not working
typing this on my 2nd pc ....
I have enough for the zinc but i couldn’t justify myself spending 100 dollars more for better sound
theres also other factors like. if you end up seeing a 3rd party case that you'll end up liking.
overall it feels more premium but if you cant justify then go with pcr
anyone else having issues not able to type ?
wdym
like the keyboard freezing up?
back space not working and enter does not work either
i see the light bar that the key is beeing pushed but nothing happens on screen
try #1019755933959733258 someone can help you out
open wootility
people are quick to reply in there
hmmm ok it works again so it happend cause i removed the typing profile and made my own profile i just didnt payed attention to what the keys were xd
not sure why my own profile suddenly is missing keys ....
ive been using that profile since i got the keyboard 😄
latest update messed with fn row and right side
😦
Was there another update for it today? I updated last night but didn’t have any issues.
what firmware are you on right now
gotta love scalpers on ebay already for the 80he, same tool who has been trying to sell a basic 60he tofu for over 400
raw for ppl wanna ultra smooth switches
this is sad man
Not home to check. I can in a few hours
everyone getting zinc ? am i the only one ordered plastic?
PCR ABS is by far the most popular choice - cause cost.
guys is it hard to pull the switches out?
Both have a pretty sizable fanbase imo
prob dust from the factory, RIP
Haven’t even taken it out of the case yet and threw on these gmk amethyst

Now sell it to me
Got my module last night and finally got done lubing all the switches! Now to stare at it for a few hours before actually using it hahaha. Coming from a wooting 2HE, the typing feel and sound is a huge upgrade for me and the rgb is stunning!
My packaging wasnt that bad luckily. All switches in the cylinder
the switches came already lubed or i gotta lube the shit outta it
man this keyboard feels so good. This is the first keyboard ive bought for myself. Previous one was razer blackwidow chroma from like 2016
man i cant decide if i go for the pcr plastic or the zinc alloy version
ive built a keychron last year its heavy weight i like that, but its so ass in terms of gaming 
let a coin decide :)
If budget isnt a problem, I'd go zinc
im touching the black zinc rn and i like it a lot
that sounds a bit weird but i understand
Dude u got a problem
touching the black zinc and my new wooting keyboard 😼

are there some graphs here on the discord, comparison between the lekker switches and the jade switches?
#🪛│modding_faq has the list of specs, searching sound tests is pretty simple to do also if you search in #🔧│keyboard_modding
ty!
Is there a beta version of the configurator that works with the 80HE?
ordered it
hope it somehow arrives faster than december 
my shit been sitting at a ups store since 3am about 40 min away from me. guarantee it doesn’t come today so lame.
Look on wooting channel
Okey!
Have you all turned on the Tachyon Mode?
Yeah but I prefer DN mode
without Tachyon the keyboard latency will increase up to 30ms
buying keyboard while we can't use it feature kinda sad
But how can I solve the problem of my A key auto-typing?
I guess the software or the firmware causing the problem
so wooting need to fix that
30ms?
yeah
its like 1.6 without
A little bit of a gap is fine right?
0.5 with
false
Before screwing in
It does not fit flush
I also replaced the other switches. its still auto-typing
Haha… yes… a little bit of a gap is fine…haha…
go on?
told yeah firmware causing the problem
apex pro is faster when you turn off the Tachyon
? I don't know if you're being sarcastic or not and it's not really helpful
If I turn off Tachyon Mode, A key no auto-typing
told yo it's firmware issue
you have to flush it in sir

this apex pro?
No amount of wiggle gets it flushed
not real stats
show me real stats than
how tf you get 30ms
you know how much that is?
thats 33 hz
coz without Tachyon the keyboard will become like regular chinese board
I assume because the pad underneath isn't flush because it sits on ridges immediately below it
ill ping u when optimum drops a vid
Just got my 80HE it's so nice
someday you will believe in me
are you angling it towards you when putting the top frame on
someday ill ping you
there are some locks that hold it in place before you screw it together
and ill be rude
that's okay we all wooting fanbois
What is meant by the background service
we all dont fking pull numbers out of our ass tho
it needs to communicate with ur computah
in the works
not yet
the program runs in the background lol
with the wooting application
yeah
I hope they add macros
we need those their macro software is lame
What does it mean when the order status says "pending"? Like, is it normal?
no
ohhhh
coz a few ppl like your status
not all of them
you need to contact their support about it
I just screwed it in anyway and it's fine 
Does Wooting 80 have plans to launch aluminum alloy, titanium, carbon fiber, or even gold cases?
yeah give it like 3-2 years
Okay thanks 😢
u r welcome
2kg gold case for <999$, I will buy
more likely to find them via 3rd party once it gets released. There is an aluminum 3rd party case thats being developed currently, but dont have alot of info on it
wooting would lose at least a hundred thousand per gold case
Not much loss 
It finally came 😄
unfortunately shipping decided to play soccer with it. The box looks like it has seen some things. Luckily, the carrying case looks sturdy.
that box has definitely seen better days 😅
This must be UPS's doing.
W carrying case tho keeping the prize secure
How did you know
is UPS not the default shipper?
NA Shipping is the horrific screech heard around the world
or courier
Only UPS can do. 🙏
Goodbye K3, you’ve had a good run of 3 years. 🫡
they weren't supposed to be in poly bags rather boxes
and ups didnt package them in the boxes

did UPS pack and ship them or did Ship Hero do that
This is not the job of the courier company, this is the job of the packer
warehouse packs em and then shipping handles the rest I beleive
yeah ship hero logistics is the packing company i believe and UPS is just the courier
Real quick, would lubing help with any rattling? Seems just the spacebar is rattling when pressed from the corners( is it supposed to be like that?) Never had a keyboard this type.
Heyyooo. Any of yall know if these caps are doubleshot too? Thanks!
😭
what are your favorite cables to use for the 80he? I'm looking at the coiled/straight cable set on the wooting site but I was wondering if anyone has like their own favs.
how far does it need to go\
I think anything around 5 feet or more is fine.
How long is 5 feet?
ah well im no good to ask i have a short 1ft cable plugged into the monitor
like 2.5 m??
1.5
yeah, 1.5 meters
my goal is to combat my 2 year old son from breaking my stuff lol
I was looking at the osume cable, I think they're really nice. I was thinking about using these since I already have matching keycaps from this set: https://osume.com/products/winterglow-eve-cable
the cable doesn't exactly need to be matching but I wanted to possibly look at other options as well.
It says “Dye-sub”
Says it’s sold out
ill reccomend wiredin's custom cables
you can customise every part of it
lots of colours too
Tape mod mandatory with wooting? Or just that stock tape name thingy?
Haven't seen videos on zinc sound test much
I will not


the guy yapping about the apex pro being faster made my day
Is it even hall effect?
ye
yes
anyone know if 80he is water resistant
but for some dumb reason they don't do analog
Bro probably isn't even good enough in gaming to notice latency for keyboard


