#🌟│wooting80he
1 messages · Page 184 of 1
It's not even released I think
correct
Background service is not ready yet
I thought that may have been the case, makes sense.
You may hate what I suggest here but maybe paint or colour over it? Depending on the chip situation?

Dont ask just to ask, just ask 🙂
Is this edited? the rgb looks crazy good
I sent in a ticket earlier about my white zinc 80HE chipping from a dessert spoon, I'm not asking you to process it right now, I'd just like to know if it's under warranty, and if I'd need to do a full RMA or you could just send me a case
Nah just took a pic, but those arrows are colored and I've matched red cap with red led color, etc
i literally cannot take a picture because my camera sucks
too bad those spots look a bit wonky with leds on
Oof, the keycaps?
@kindred coral
pbtfans neon r2
is it safe to order a 80he right now i seen lot of qc issues
the x-ray caps also has random markings underneath the transparent shell
do not get white.
if you're clumsy, dont get the white one
i wanted white so... im not clumsy 😂
Dang the quality is so bad I can't even sharpen the image
not even clumsy, you need to baby the actual hell out of it
well, if you gonna be really careful, go ahead
But yeah thats certainly a hole
i did tell you that my camera sucks.
good to know
idk, didnt have much issues tbf, I did chip mine but thats because I banged it with a glass bottle lol
nvm
You can get a white 80he but just don't be clumsy
imma go safe and get black
i flipped a spoon from my bowl onto it and it chipped instantly.
rip son
i think it's something to do with the manufacturing process
IF i remember correctly matthew encina had a video about designing x ray keycaps and there was a bit about this particular issue popping up and being fixed by basically painting those spots manually
i didnt even like
smack it, or drop it from up high
it was a 3 inch fall at MOST
😭
My mouse weighs 68g and if I drop it 3 inches up it makes a pretty loud sound
100g metal spoon will do some damage
it's probably less than that i dont have a scale
oyakodon
It will need a few layers to fill up the chip.
valid
Give this a shot. Ive used them before https://www.amazon.com/White-Paint-marking-Permanent-Markers/dp/B0C58J4QND/ref=sr_1_5
Join the cult of the Raw 80he 
If I had a raw case and it got chipped I think that would just add to it
It's quite easy to make if you have the ingredients
damn even though the 80he were pushed back twice so many people are having issues with them
Seems like just the white paint
Not seen any complaints from people who have anything but the white zinc case
You want the traditional way or the easy way?
overheating issues too
What
look at community support
how can a keyboard overheat
about that.
bruddah
link the post
that looks unacceptable to me
Have seen one guy who said it got warm, no reported board has overheated
what keyboard?
You get 1 guess
Apex Pro Mini
one needs dashi. and takes more time, the other is throw stuff into a pan.
LOL
I mean that really sucks too like 200 USD down the drain
btw theres more than one person claiming this issue
Not really
is this the 3rd version with omnipoint v3?
What
what is that did you mention the wrong person
i like your username
https://wooting.io/product/detachable-cable?Color=Stealth
Will the Cable Support the 8KHz Polling rate on my 80HE?
Granulated dashi though
If you put it in straight mode then yes
wdym?
ignore
no i mean which version of the apex was it? was it the Apex Pro Gen 3 that overheated?
grab chicken thigh and cut it into your desire sized pieces, cut up as much onion as you want.
brown the chicken in a pan, take it out
cook onions until they're almost as done as you like them
mix soy and mirin in a bowl
Add chicken back in, add your sauce
throw eggs on top
cover with a lid and steam
cook it till you think it's done
a lot of this comes down to personal preference.
i use about a table spoon of soy and mirin for 5oz of chicken, half a onion, and 2 eggs
that's how they all are, it's on specific keys in all of those translucent sets
pbtfans emma and x-ray are like that too
no idea why they made it this way, the adjacent keys don't it and molded in a different way yet a few keys are molded to look this way?
we unironically dont have that here
but doesnt everyone expect to get theeir sets without those holes?

less a recipe and more a general guide. you could use chicken drumstick meat, or chicken breast, but most people use thigh.
As you make it more often you'll figure out how you like to prepare it best
so it supports the 8KHz Pollind rate without any problem at all?
this is cool
also thanks for letting me know about the x-rays i know not to get them (it will mess with my OCD so bad)
I'm lazy so i dont even brown the chicken at the start i just throw it in near the end, saves on dishes.
what do you mean ignore
dry joke
ye, to be honest i didn't even know about it until i saw it on my own set and then remembered x-ray video about it and realized they're produced by the same company
let me find a video about it with x-rays
thanks man
https://youtu.be/Z2z8Bpz_5sE?t=124
timestamped
Learn the process of how I created The X-Ray Collection a set of minimal translucent tech peripherals for your desk setup. https://www.modmusings.com/x-ray-collection
🛍️ Thanks to @shopify sponsoring this video: https://www.shopify.com/matthewencina/
▬▬▬▬ Video Overview ▬▬▬▬
In this video, I share the year-long journey of designing my X-Ray col...
That's unfortunate
he mentions that it's a part of the manufacturing process yet it doesn't affect all the keys? eh
Oyakodon = A man of culture
Self-promos are not allowed 🙂
okay i think i get it now
those things are on every key that has an enclosed symbol like O D R A, etc
the letters are injection molded and not printed or anything so it's probably the only way to get them to inject properly
@valid comet
These might be silly questions but when will Wootity V5 be available as an application?
Also, do I have to have Wootility open on my browser for my settings to stay the same while I play on my 80HE?
when its done, no time limit
and you can just download it into ur wooting
We do not have an estimated date when wootility v5 will have an application version.
You can save your settings to the keyboards memory, just make sure its in the onboard slots under the My Profiles section
Ahh okay thanks a lot to both! 😄
Imagine if I can go back to my watch store and replace the bracelet after I scratch it on a dessert spoon 🥄 . What a wonderful world it would be 😅
also, you can shortcut a browser
i have my v5 as a shortcut rn in my taskbar
no need to use a browser
not that kind.
the difference is you wouldnt scratched your watch bracelet on a dessert spoon unless you did it REALLY hard
a better analogy would be one of the clock hands snapping in half if you bumped into the doorframe.
I get micro scratches from my backpack 🤣
ok thats a worse analogy ngl
Even my grade 5 titanium scratches
Are you using some kind of leather strap or smth or is it just really soft metal
i dont mind scratches i mind the fact there is a damn hole in the case.
and the fact that this literally only happens to the white case because its painted not anodized
white paint cannot
e-white alu* waiting room
ur nail isnt metal
i never said it was
what did cal lie about?
What size/weight hammer was he referring to?
it cant be lighter than the spoon i tapped against my case dude 😭
i didnt drop a water bottle or my microphone or anything on it
the white zinc paint aint so fragile
my copy begs to differ
you win.
also if you guys r referring to hipyo tech vid remember the "scratches" heleft were literally metal dust from the keycap puller u can remove with spit and ur thumb
no i dropped a spoon on my keyboard and it chipped.
Dropping a metal object on the keyboard, especially something with a potential edge/angle and a little bit of weight, is prone to chip on anything.
From my experience, the only scratch resistance material is Ceramic. All painted surface is delicate. Steel is soft and you can polish out the scratches, weld on new materials if dented
okay but this easily?
like seriously?
well u cant stop paint from chipping but i mean like rubbing ur fingernail or mouse on it isnt gonna damage it
It’s reality
obviously hitting it with something sharp or pointy is gonna pickaxe away the paint thats how paint works
Its not a matter of easy, its a matter of bad luck. Some people can drop their phone 100 times and be fine or drop it once and screen crack. Depends on the angle that it lands or the terrain it lands on. A spoon, even though just a spoon, could have hit on the edge and chipped the paint. Should be an easy fix though!
which is the impression some ppl haveof the white zinc due to some reviews
im positive there is a coating they couldve put ontop of the paint to not make it literally explode on contact
it's paint
worst comes to worst im just gonna get a refund 
it would fracture under any coating too
Probably true, but at what cost and would people pay it?
That’s why you should always buy metal.. it can be repaired, repainted
That’s why people wrap shit up in paint protection film
And that aint cheap!
To protect the paint 🙃
yes, just put it as an additional option?
If you play ball, you better be a baller
i mean chances are youll find chipped paint all over your room walls and door if you look close enough
You couldn't reasonably foresee the paint chipping this easily dude
of course! that's natural wear and tear
i wouldnt knock my keyboard with anything metal ever; metal or plastic case
yeah and things called "accidents" happen. everyone thinks it wont happen to them until it does
You don’t need a university degree to know how paint works thought.
well yeah
Its unfortunate and should be fairly easy to touch up. Is it too fragile though? Guess we need to wait for the team to finish their investigation.
the wear and tear on peoples walls where the doorknob hits into it when they open door violently is caused by them too
ppf is always cheaper than a respray
Ofc, that’s why my car is wrapped in ppf 🤣
my knobs are pristine
i dont expect my wall to have a giant hole in it by tapping it with my doorknob.
Obviously over time if you repeatedly hit your wall with it, there is gonna be a problem
Can you lube the Spacebar without taking out the stabs?
ur hole isnt giant
i dont expect my wall to have a hole in it PERIOD
im not saying ur right or wrong about your case, but ur arguements are gettings really bad
Imagine if I can go back to my dealership and complain about a stone chip on my paint. Saying the paint is too fragile 🤣
No, 'tis not so deep as a well nor so wide as a church-door, but 'tis enough, 'twill serve. Ask for me tomorrow, and you shall find me a grave man.
Will the raw cases also chip?
a hard object hitting a sharp corner, no matter how light is kinda probable to cause a hard coating like paint to chip
No
i mean typically paint is kinda random sometimes it does no damage other times it chips a ton
the raw case with no coating to chip?
It’s raw. It may put a dent on it
it doesnt have paint
this is the answer
I'll find a way to chip it when it comes in 😎
Would be great YouTube content
yeah but its youtube, 80% is shitpost
Anyways it’s an east repair
At least people are not smashing their phones left and right at the release date
meanwhile JRE:
He is a strong guy 😆
fr
its not possible to download wootility v5 standalone as of now, is it? cause currently im using chrome basically just for that 🤷
It's not, yet.
you can do this
just press that monitor icon thingy
true, can install as a browser app thingy
ok that's probably gonna be the same thing under the hood anyways. perfect, thanks 🙃
good shout on the marker, worked wonders
many thanks
hi! I just got my wooting80he in yesterday, and I've noticed a relatively high pitched pinging noise with primarily my right shift, a bit on my enter key, and sometimes on my space bar
it definitely gets louder the more aggressively i hit the key, but i was wondering if it's something to do with my stabs, and if there's anything i should do to fix it efficiently
How fast has the previous batches been? Just missed out on the october batch and now its december, it says early decembee but what can i expect?
ornot..
sounds good. i DID swap out the switches.. but the problem stayed, so maybe it's the keycap weight + the spring? i'll take a look at it soon then.
I was really impressed by my 80he; I might have found my forever keeb
Two more months
gotcha

🤣 i accidentally dropped a steel pestle on my phone from a height of 2 feet and it didnt even crack
Why has my order been in the pick & pack status for 7 days?
the metal one
does anyone else have a few keys on their 80he that have a more pronounced "ping" sound?
right shift and enter for me
interesting
haha crazy that you just talked about it above
for me it's the J mainly
It might be a mild inconvenience, but this is a great opportunity to learn about come keyboard modding! I can't tell you exactly what will fix the issue, but I have some ideas as to where I would start.
I'd relube the switches, and the stabilizers. I might bandaid mod the stabilizers, too. I'd also add more insulation to the case (e.g. tape mod).
You can look up guides to all of those things. Great youtube tutorials on it.
do you have the lekkers?
It did not like me updating to the latest firmware
Lovely
Guess I'm restoring this once I get home
for my part i don't like the profile indicator as long as i can make multiple solid colors as indicators i don't see the use... as example light blue light green etc pp so the solid color is my indicator^^
okay, sounds good
yes lekker60
Batch 2 is 2x the size of batch 1, if you ordered late July-August you got the mid November ETA. I’d assume early to mid December unless it updates with something different
someone wants that refrag code i recived?
hey, sorry, i like your name 😮
Hey quick question, mostly troubleshooting. So, I've added 4 profiles to the onboard profiles slots on my 80he, however when I try to cycle or press any other profile selector with the function keys, it cycles between the two same profiles every time.
good thing to have but no one play cs2 it's classic game no one take this game seriously
Do you have it on cycle, or the swap keybind?
Both
are all proviles ACTIVE? if not drag and drop to active
I only play hardcore games like dark and darker
When I try any of the cycle, swap or use any of the dedicated keys I set it only swaps with the two sames profiles or doesn't even swap at all.
Yes they are
Can you screenshot your wootility?
With your profile dropdown and keybinds shown pref
based
it only swaps between 1 and 2
Just the way I like it
The name?

Name it better
same thing on ever keybind
You might have cycle on one profile, and mode on another etc
I want to fix this issue first
same one for every profile
Fn keys don't work for me either
same fn layout
Weird
Can you try bind cycle to a button without an fn layer swap
Just on the default layer and see if it works?
anyone got any news on EU-Walvis?
Same thing
It only swaps with the two same profiles
Hm
And forgets the 3rd one
Last ditch effort, but its prob not the case
Can you click the ellipsis on the right and see whats there
If it says move to inactive on all 3, post your problem in #1019755933959733258
Alright I'll post it
Shows the same thing, just not on my default profile which is the rapid trigger
Sorry friend, not sure why its not working
A0-5 etc dont work either?
mine decided to commit seppuku this morning when I remoted in to my home pc lmao
Yeah its very nice
You got plastic or zinc
plastic
Igor is being really careful with your box
When you make your community support post please provide a video if you can along with your wootility. Also feel free to ping me once you make it, ill see what i can do 
if they started by cutting down trees to make the boxes, they should have been done by now I think
yeah, go ahead and give it away to someone
I just realized that Keychron's wood palm rest for the Q7(340 mm x 15 mm) is actually quite close to the keyboard dimensions (346 x 142 mm). I think I’ll give it a shot!
Vegas bros our time is coming! Hodl!!!!
do we have any other nebraska folks in here
i may not be a genius but isn’t 340mm x 15mm drastically different from 346mm x 142mm??
or am i just not cultured in this department of accessories
6mm left right will n ot really be noticeable since its only 3 left right and 80he has round corners
OH
0,8mm hight can easy be adjusted with removing rubbewr feet
Is the 142mm and 15mm depth then
yeah i’m an idiot and thought you were comparing two different wrist rests and not the wrist rest and the keyboard lol
I was like damn that seems like a huge difference to me between the two lol
i actually like the silicon so faar but its very deep wich takes a lot of space and looks a bit akward for me maybe i just need to get used to but ordering and if i don't like ssending back is fine amazon is really good in that 👌
Typing test with audio: 80HE Zinc Alloy + Lekker L45 V2 + EPOMAKER PBT keycaps
bro I swear optimum has like 10 videos lined up
super satisfying sound
Man, I just found the exact combination I want for my future Wooting, especially once an aftermarket case comes out.
But boy, does it add up...
waiting for the wooting
Is the 80 open source like 60, i want a alu case so bad
still no 3rd party cases
it will be soon
Design files will be released eventually
they are releasing design files soon
give it like 3 years you will find alot of cases
Less than two months to go 
yeah cause the layout not that popular
they won't make cases only coz of wooting boards
49 days
True but ima do a woodting one in the mean time
There's a reason there aren't many they don't sound that great
Im from viet so labor is very cheap just buy wood they will follow the design
Depend on kind of wood u use
And how much u gonna mod it
Also wood warps over time
There is oil for that
Which would need reapplying
For something as thin as a keyboard case it's a lot shorter
Yeah you could do it but it's expensive to get right
https://youtu.be/WmcRHwzrLmA
Alexotos explains it better in this video
✅ BUILD SPECS:
Keyboard: Gwŷdd65 — https://www.hexology.design/pages/gwydd-65
Plate Material: Varies
Switches: Go Polar Yangs Switches — https://divinikey.com/products/gopolar-yin-yang-switches?ref=oScu8BXzF73dpE
Stabilizers — Cherry clip-ins
Keycaps — GMK Cubed Keycaps
Disclaimer: This unit was sent to me to review. They ended up letting m...
May I ask when you received the goods and purchased them
Why can't my order be lifted from the hold now
I been asking about this for weeks lol
Anyone have the issue of disconnecting and reconnecting only inside the wootility webapp but not the windows (no disconnect se of windows)
halo may I ask that did gateron jade pro working on 80HE and where can I buy it any official website?
안녕 It's Mikey here! With the Wooting 80HE starting shipping and orders arriving lets finish up the Wooting 60 Switch Upgrades with the new Jade Pro and Black Knight and of course the Max once it arrives. My Wooting 80HE is coming in tomorrow and I will definitely be doing many videos on that! Let's do today's comparison with the Dash, Geonworks...
try lowering rgb or use original cable direct to back of pc or laptop
I will have a try thanks
Type Gateron Jade pro in google and you should find it
Won’t find it on main website for some reason
they weren't showing for me over the weekend
Geon 🙏
jade maxes coming soon to my home :)
Nice gz
bro NA got fucked 😭
someone needs to do a proper sound test of these, the ones gateron uploaded were not the best
NA is cooked
Now I can cook 
I got my two HE today and I realized that when holding down a key such as backspace, the key repeating isn't as fast to start and isn't as fast while holding it, can I speed it up some how?
Also wootility always spawns on my second monitor
Where is the "¥"?
Also, even if I set a backslash, I can't enter it.
@burnt bane i heard connecting to a different USB port on motherboard helps...
ok i will give it a try thanks
Ouch…
when did you order
Half an hour ago
lek v2 on top, good to know im getting a really nice stock pre built
#1289036527640379442 message Does this apply to you?
USA, prebuilt plastic black no accessory
2nd batch is running out. Some folks are 3rd batch now
Thats what i ordered
Check your hub, it tells you what your orders latest arriving item is
Its the module
Yeah then you’re batch 3 I guess
Looks like it will be a Christmas gift 
how the typing feel ?
any update on the white cases my good sir?
I will wait for custom cases, until then i will use the frost
My plan as well :)
in terms of qc and shipping*
yeah then that sounds right tbh
i got black zinc too :)
Thats another story but a good question, i hope its scratch proof 😄
idm scratches i just want my kb 😭
Bro im not sure did u saw but you can write your graffiti with your nail on the case with no problem
i'll sign it and make it unique to myself
def a problem but ive been waiting since march haha, i'll take anything at this point
https://youtu.be/s1LAGIwWDnQ?si=mqHUYh4h-D3GA2JN from 9:09 check it 👍 but its %100 just a prototype qc issue imo, its 95% fixed if you ask me
Is the Wooting 80HE The Best Gaming Keyboard?
Sponsored by Shopify - Try building a store for free! https://shopify.com/hipyotech
This video is NOT sponsored by Wooting but they did send me the keyboard early.
✔️Buy Hipyo Tech keycaps, deskmats and more!! https://hipyo.co/ ✔️
⬇️Affiliate links to help out the channel ⬇️
Get a wooting 80HE: http...
ah yes i did see this
hopefully it is fixed
there'll be an announcement at some point, hopefully end of this week sometime
not much we know beyond that
thanking you 😁
White zinc released from hold
Should continue shipping out now
anyone else having issues with ghost typing?
I wish 80he also had a strap, also wish it was just a tkl layout 
Not sure how a strap is useful for a keyboard. It's not a Wii remote 
Fixed the delay before key repeat in my system settings, no idea about why wootility spawns on my second monitor though
Anyone else keeps checking their order progress hoping it magically changes?
I was for my two HE XD
Who says its useful
, its just giving it more personality
maybe you can get a third party case with a strap in the future
Thats why it’s removable
Takes up too much space on a larger keyboard
same
From what i see from the reviews its not that thick, compared to my monsgeek m1 at least
did they announce something? I didn't notice anything from any of the staff yet
Yep, i just compared 5cm difference
It's sooo nice
Didn't expect the weight
So sturdy
My white zinc got shipped yesterday, means they are back on track now
interesting
Makes my 60he and ss apex pro feel cheap
This is MID
ikr this is easily the best kb i have ever owned
We will see it 
im honestly thinking about purchasing the module and building one up with the frosted plastic shell too
some have frost and black keycaps and ghost black keycaps

I expect some news about the raw case today
would anyone mind letting me know their idle actuation point for their 80he? mine keeps fluctuating around 0.25mm when im not even touching it, its causing ghost typing
mark already came through and said roughly october 3rd shipping for raw cases
Where?
In the pins #🌟│wooting80he message
Fuck me that's late, raw buyers will be the absolute last founders to get their keeb apparently
Leaving the best for last
na will be last
they haven't even started shipping group 1 for them yet
Fair enough, I just want my keyboard and don't really care about scratches on raw metal tbh
My white zinc have no news yet so u wont be last
NA is suffering
political
any updates for white zinc alloy case??
Copium
Released from hold, should on track now
Just wait, at least they didn’t on hold now
Got bored of Val and cs before we getting 80he 😂
you just need to buy more skins clearly
don't worry there's a new ghost skin today
Marvel Rivals gonna be my main
I am ashamed after seeing $400 spent on my riot acc
could be $420 with the new ghost skin though
😭
KDA gragas
riot overpricing skins and underpaying for tournaments
my riot account is definitely higher since I bought both the limited yone skins for league and tft lol
I’ve seen people with $3k plus spent
but outside of those 2 skins the rest don't add up to much
At least you didn't buy the faker ahri skin
yeah i have a friend with every skin in the game
his family owns some export companies in korea though so he be balling
How much was that like 200?
good joke. The low level one was $200
the good one was like $400 or so
ah…….
Lol
robbery/glazing by riot and faker
Just picked up my keyboard all I have to do now is build it
Mine went from ready to pack back to queue so i dont know about that
Just took it from the post office an hour ago.
Wow! One of the best typing experiences I had so far. It went beyond my expectations. So, thanks, Wooting team! And hello from rainy Pattaya to everyone.
you could have the most viral wooting video if you unboxed the keyboard and accidentally dropped it off the balcony taking that shot
Imagine someone on the sidewalk there
They'd have no idea what hit them 
Typing experience so good it almost makes you want to clean up wires around your desk 🎉
Where's this?
It looks awfully familiar
I will not drop such precious tool from a balcony. With this weight of zinc alloy I can easily stop an alien invasion.
Jomtien, Second road, La Santir
Hmm, thought it's souther than that, looks soo similar to my state. Almost uncanny
I just realized that my magnetic desk has been causing my ghost typing issue
May I ask when you made the purchase
May I ask when you made the purchase
May I ask when you made the purchase
April 3
May I ask you to stop pinging random people? 
You can get an ETA on the wooting hub
may I ask you to carry on being awesome 😎
Mine shipped yesterday, should not be on hold now I guess
has anyone burger mounted their 80he? thought it would be pointless but seen some ppl say might be a good mod for it. what do you guys think
Don’t think u can
And why even when its already gasket
80he stock is good enough for me
yeah literally can't
why did you cancel it? now you'll never get it!
i contacted postNL because there was no update for awhile, and they told me was it was delayed and i should inform the sender to start an investigation with them 😦
I didn't cancel it
If it's been on hold since you first made the order then there's an issue with the payment
@unkempt linden but the image shows you cancel it
we can't help you on discord though so go contact wooting
Thanks for giving us a training subscription and a price competition which I would participate in with my new 80HE but unfortunately the event ends a whole month before I get my 80HE which I pre-ordered in April
Im fine with getting it late but this makes me mad now xD
just go do the challenge with your current keeb
Ye will do
Its just a little tasty salt on my 80HE
My fine gourmet dish comes end of december
Wow… that a big move
they will fix it for you I don't believe they will let you wait all this time
Sorry for the late reply I think I preordered about late mid way through
Is the white rgb supposed to look slightly pinkish?
yeah thats pretty normal with RGB
It's because rbg, so you've gotta tweak numbers around and set red to 210 and it should look cleaner
Meanwhile.. my order is moving right along… today’s update = 5/10. From the first estimate delivery of 23/9.
I guess I am not the only one having time optimism issue 😆
also I suggegst dimming the RGB a bit because all 3 R G and B diodes will be active and and may discolor, i have had bad experiences with leaving RGB on white for too long, maybe wooting LEDs are more efficient?
Has anyone tried Cerakeys for their wooting 80he? or are cerakeys a scam lmao.
It depends on what you consider a scam..
I heard allot of mixed reviews for cerakeys, im fine with bombing the cash for them but I wanted to know if itll fit the 80he layout.
The mixed reviews just like wooting 80HE?

Sorry, back on to the topic. What are you looking for in the Ceramic keys?
I have already paid the money, it will be paid on May 8th
Mainly if itll fit the 80he layout. In terms of the mixed reviews I mentioned it was mainly about the keyslide and quality control issues of the keystems for their V2 variant.
It will fit because its Cherry Mx. The quality is an another issue. You might get lucky.
genshin player?
it'll fit fine, you need heavier springs for space bar though
hello :D
If I got the lekker 60 would you still reccomend a swap for a more heavier spring?
Who isn’t 🤔
you too?
yeah i'd still swap. L60 should be able to handle it but the return isn't going to be great
ideally you'd want to step up a notch there for spring weight
Since day 1. But now I just pull for waifu..
November 19 2020 i think? Tartaglia was first pull ever (that was all my luck ever)
Im wondering how are they gonna fit my module, keycaps, case into one parcel, lol
Ah that makes sense. Im pretty novice in terms of replacing a spring on a switch. Do you have any reccomendations? And I assume your primarily talking about just the spacebar due to weight difference between ceramic and abs?
Yeah something like that. Too much of a grind
I think you miss understood my question. Are you buying the cerakeys for the sound? The look? The weight? Or the material itself?
Ah I see, yeah I was purchasing primarily for the weight and material
yeah the weight is a bit heavy for space bar. Wooting themselves sell a switch pack or you can buy springs on aliexpress as well
Anyone already changed their stabilisers on their 80he or plan to? If so what ones you looking at getting 🙂
knight v2s for me, mostly just because I like them and use them for all my boards
When will eu brug arrive
check your hub, it tells you
tree fiddy
I didnt order yet but people saying they get a later batch and site dont renew the information on order tab
keeping mine stock
doesn't really make a difference so no
the people who got later batch ordered items that put them into the later batch or they were old orders that accidentally got bumped due to a bug
I think stock ones are decent, if needed you can lube them but you can stay with the stock ones for sure
I see, Asus just announced the same material for their Laptop “Alumina Ceramics” seems to be the new “black” . My personal opinion is that the current implementation feels cheap… almost like porslin look and no where near the quality and durability of true “ceramic” . Look up any ceramic watch case and you will understand.
I just lubed them better and there's nothing wrong with em
that said the longer you delay the more likely you will be among the batch 3 people because batch 2 is already running lower
stock, spacebar rattled like mad
some modules and such are already batch 3
So if i order i will be in eu brug or other one
you must be very picky to swap stabs
it tells you on the page
all the iso orders for module are batch 3 right now for example
Site is not up to date it says wooting 60he stock arrives 19 September
Let alone 80he
60he is not 80he.
So both not updated
80he is up to date, the 60he bug is a totally different thing
either way if you're ordering ISO you're batch 3 almost definitely
all the iso configs seem to be sold out in batch 2 already
I see, I do not know if Cerakeys provide a true ceramic keycap or if its modified in some way. I only know of the company due to hearsay and the mixed reviews I mentioned earlier. I probably will put a order in anyway, but yeah I was mainly looking at the product for their Weight and Material.
ANSI still has stock of batch 2 though
Is that the one arriving 31 october
yeah
Eu brug
Okay thanks
seems batch 2 really is close to selling out fully
Just have the right expectations. Good luck with your purchase. 😉
looking at the EU site it's just some ansi module/prebuilt and only jis prebuilt for batch 2 left
lekker v2 spring compatible with geon raw?
yeah works fine
why is white and frost wooting so GOOD while black look so cheap 
Im wondering how are they gonna fit my module, keycaps, case into one parcel, lol
great, forgot to buy a 60g for the spacebar, now i just need to swap the spring
by having a big enough box 
Yeah was planning on staying stock. But seen a few people having issues with the stock space bar ones
it just rattles, I didn't have any other issues -- moar lube and it was sorted
Finalized the build, how do you like it?
looks like it was a minor assembly mishap in that case
neither of those seem to be particular stab issues that would be fixed with another stab
those just seem to be they got dislodged or something happened in shipping and they had to reinsert them
or they need more lube/better spread of the lube
which again isn't something solved by a different stab
Hmm, 7.5/10, pure black case/rgb might look better.
link keycaps?
stattrak factory new
hate the keycaps honestly, too graphic/busy for me
fonts inconsistent
fair enough lol
i think theres merit to it
i like the colors being different middle way through the top
honestly i'm 100% convinced that if the 80he came with perfectly tuned cherry clip in stabs with perfect lube, balancing and no rattle that some people would still replace them with other stabs just because they read about other stabs somewhere
for sure
no it's just because there is no discernible difference
the impact is so small there might as well not be any
The keyboard makes no difference to PC performance, unlike a mouse
Like 8k mouse start moving it around rapidly probably uses 10%+ CPU usage, the keyboard does nothing
Also depends on how fast you're moving the mouse, it's not reporting packets with 8kHz all the time
if i move my mouse with 6400 dpi while having 8khz, cpu goes crazy
well it is just that usually the packets contain no data as mice send relative updates on movement
My point is that computer ignores empty packets, so they don't impact performance, but yeah
oh yes
Yeah
We should find someone who can type at 1000wpm to see if they can increase the CPU usage
8k polling with 6400dpi
it wouldnt alan
fair enough 😂
KeyPress, KeyRelease 
Still waiting
Same
October is just a couple days away
Its november
They do, But i ordered last month and i cant wait, this needs a wooting
my azoth increase CPU usage while typing too fast even it's just 1000hz
probable AC problem
This looks AI generated
haha it is
Its not
You camera applies some filters or something, but it feels smoothed out and looks AI generated, maybe it's me
Guts 
hes build diff
I do use this

is WL better than your finalmouse?
Still like the finalmouse ulx more now
they're gonna release a competition version I think. Do you like ur stream deck or not that useful?
I know, i dont realy use the stream deck at all
I wanted to get this one but I guess not a bit too expensive but the knobs and screen look nice
Bro they're like apple, they reach the end game every time
let's goooooo
How are you extending USB, DP, and HDMI to the PC?
I use a powered usb hub
And a long dp cable
My mourning routine these last days:
- Wake up from a dream of having the 80he
- Check discord on Mobile phone to see RAW cases updates
- Get out of bed
- Check discord on PC to see any RAW cases updates
- Go to toilet
- Check discord on Mobile phone to see Raw cases updates
- Wash hands (really important and sometimes underrated)
- Prepare some coffee
- While waiting for coffee, check mobile phone on... you know. RCU (Raw cases updates)
- Drink coffee.... while looking at discord
- Go to toilet (coffee driven).... same as before
- Open tablet on discord
- Place the tablet on top of the toiled while taking a shower.... so I can check for RCU
- Put some clothes on
- Now on the computer checking for updates and writing my routine.

thats me, except its for the zinc case, and its been hardstuck on germany since the last week, not getting out of the export center
HAANSSS, what are they ZINCing at the export center? 😉
idk, i even have a feeling that they stole my package and ran away with it, cuz theres no way its hardstuck for a whole week right?
Well, are you based in Germany? Is the export center a place you can go for checking if there is a problem? Here in Portugal you can go to customs to check if there is something blocking (they even notify you). What is exactly the export center? Is it the carrier or customs?
its the DHL export center i think. its been like this for a week now, and i havent received anything except a few scam phone calls that got blocked automatically
If the tracking fails to update for 14 days (for DHL shipping to continental Spain) then the shipment can be considered lost and a replacement sent
nice setup! I tried doing something similar with the mic arm but could never get it comfortable. always hit it with the mouse while playing FPS games 😦 one way to solve the wire (if you want to) is flipping the mic upside down 😉 i've resorted to putting my mic arm on the left side so it goes over my keyboard instead of mouse
Hype!
If you live on a Spanish island please reach out via the support system directly https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
thats good to know, do i have to contact it via wooting hub if theres no updates in 2 weeks?
Yes please
F*ck...Wooting has to start an investigation
welcome to the club. waiting for support for 3 days now
years after years no problem...new keyboard where you are waiting like ages for...DHL has problems....arghs
feel you 100%
the workers were busy playing soccer with the parcel and accidentally kicked it onto a heavily trafficked road
now they gotta come up with an excuse what happened
at least that's the impression I get half the time when my boxes arrive all dented up
Its football not soccer stop
gotta write so the cheeseburgarians understand you know
That's doublecheeseburgarians to you
that's true my bad
Quarterpoundarians 
what does pick and pack mean
like it says, they're picking stuff and packing it
recieved my 80he, put it together using video from wooting youtube. It's the black zinc with wooting l45s. I'm beyond happy with it after using it to test. It's so buttery. 🎉
The question arise when you’re moving from pick and pack, back to fulfilment 🤔
So the fulfilment steps can move both ways, not a linear one way street 😆
are those the l45 v2's or v1?
on the box u can see a feint 2
Now I could be wrong of course, but I do believe the big 2 on the switch boxes means they're V2 😉
^
Oh thanks i have bad vision 

That's new, PostNL told me to wait even longer since it'd take anywhere between the intended 4-8 and 28 days to ship even though my status has been stuck on "Shipment is ready for transport to the country of destination" since the 18th
my caps needs to be pressed down for something like 200-300ms to actally activate on the 80HE, is that macOS or Wooting "feature"?
where is it being sent to? and im in a similar situation. only contacted them today.
Singapore
ah same. my worry is that the ticket i sent is classified as a low priority ticket and im not going to get a response for 1-2 weeks. and if thats the case and the package is truly stuck for some reason then its gonna be delayed forever
pain
hopefully some staff sees this. i dont wanna ping
my black zinc case is also warped. no issues with the Ghost case sitting in the same place
Waited 6 months just to wait even longer, what else is new
I have been waiting 2 years for the Finalmouse keyboard
another bent zinc
send us an email if you havent already :)
Thanks. Do I send to social@wooting.io?
yes


Another one
SMH
new zinc case accessory 
Wooting will have a lot of shipping costs replacing the warped cases
Temporary fix - take one of the feet off, it slides a bit as there's less friction but it's better than a wobbly case
How fast has the delivery been for people? Next batch is in december when can i expect it?
It tells u at checkout
Ik it does but is that accurate or has people experienced delays
Mine came on the earliest day in their range
it's accurate unless there's a delay
Delay for sure if you use PostNL
Depends on your local post office
If its gonna be delivered end december prob some delay due to many pckets
I just missed the october batch im so sad 😭
Where do u live
Norway
How doni see that
just got my wooting 80he, whats a good height of a wrist restr
Probably eu im not sure cant see it
assuming it isnt actually stuck somewhere, i expect itll arrive in SG on wednesday afternoon and 1-2 extra after for customs and delivery
I can't be arsed at this point lol
I received my frost module. It's a nice step up from the 60he
nice hd800
mine has come 
ah a based white wrist rest enjoyer
looks discolored already lol
an insane person 
pretty sure that's just shadows from the light
I don't like that he still has 2 icons on his screen
at that stage just go 0 icons
its a trashcan and a random file too
we demand justice for the 0 icon movement
Looks clean
i respect that he color coordinated his keyboard, mouse, mic and mic arm though
I need the 80he lmao
I should have waited 5 more months wooting have so many defect
? do you actually have problems with yours
When did u get yours
rate my sanity
4day ago
How do u have defective problems already
and what's wrong with it so far?
What's wrong?
Like the other better
Haha it's the light but yeah I don't have my hopes too high
just don't use any strong cleaning solution, it should stay white if you clean it often
Aaaaah yeah all right. Mind you I just recently switched from taskbar to the left to taskbar to the bottom so I am still getting used to it
20 years with taskbar to the left left me some habits
Yo I'm like your evil twin
wobbly and loosened switches/board, bend case/leg, blackcaseturn gray wootility have alot of bugs, keycaps is weak still trying to find more defect
Goku vs Goku black
im the unlucky one
bent case? or the printed legs?
the default
i'm extremely skeptical you have all of these things at once
nah he does i think
what does he mean by the first one also
what is wobbly and loosened switches/board?
the case and wootility part at least
yeah that's what I mean, he probably has one or two of those, but I highly doubt he has all of those things at once
how is black case turning grey?
im not an expert but thats what i found
and what is keycaps is weak even mean
i think he's just over analysing some normal stuff at this point
he's right with I do think they wish they hadn't rushed wootility 5 and the few bent cases thing isn't ideal, but the rest I think he's way over analysing them as issues
Idk if it is over analysing. The keyboard was expensive as shit. These problems really shouldn't exist
yes which is why I'm asking what he means by them
because half of them sound like normal things in every keyboard
RMA+Refund
wooting support is very good
if he truly has all of those things happening he can refund it as a lemon
but a lot of it sounds like some real issues mixed with some things that aren't actual things
I should get mine in like two weeks. Hopefully mine isn't warped. It doesn't seem super common.
problems exist, we're living in reality
good news is wooting will provide solutions (probably)
like what is loosened switches/board, black case turning gray, keycaps is weak even mean - he still hasn't explained what that means
sucks you're going through it @lethal moss ! good luck bud, definitely do complain & ask for replacement/refund
i'm sure wooting would love to know if those things are happening so they can see what's up and if it's something for them to fix
oh shit mbappe is playing in playins soon
when i press i think the stabilazer is bend my enter keys and shift turn sideway when i press it
what? Your stabilizer is broken?
take a video and post it here please
not sure is broken
if that's a real thing they need to know
just be installing it wrong or either keycaps
you can buy a product for millions and still end up with one that has defects, price point doesn't really matter, nothing is always perfect
but like i said im not an expert i have to live with it
no you don't, stop complaining here, contact support
what matters is how the manufacturer adresses the issues
post a video please
of the shift and enter key issue, because it's the first we've heard of this and if it's real then it's good to document
ill contact support later and ask them but im not going to keep this topic here 
how are the 800s? worth?
Yeah have them for more than 7 years now. They are perfect for me but they lack some bass for some. They are also very very open so the sound leak a lot. You have to tweak your mic not to pick sound from it (and obviously you won't be able to use them in a room with someone else sleeping). Appart from that they are a banger
the odder the symbls get the more you can detect their mental state
Outlook
Not good 
i use hd600 from time to time but my ears get sooo fatigued from them. really good exp from time to time tho 😉 thought about getting the 820 because they're closed back, maybe this xmas 😄
Am i the only person with snipping tool and task manager on their taskbar
ShareX >
snipping tool yes, manager no
Nope I use them all the time for work
Not loading more bloat onto my pc than what windows puts on its own >
why would u need the task manager on the taskbar
why have it there when you can just shift+win+s
same for task manager just ctrl+shift+esc or right click empty spot on the taskbar and click open taskmanager
I used to be in a situation where force closing certain windows processes was needed to get my pc to a state where i could play games without giant second long stutters
Shift+Win+S for the win dude. No need to have that in taskbar
(I was too lazy to reinstall windows)
I use the shortcut every day more times than I can remember but sometimes I have my hands full
Is this a feature? Or....
might be a little bit of debris or cutout in that hole that got stuck in there in building
should be able to open it up and check there - there was 1-2 other people who had something similar
same, some games go blackscreen and stop responding, and u cant even open the task manager with hotkeys
if it is then you can just remove the debris and you're good
you ordered two separate orders?
jealous. I have a similar order but all in 1, so have to wait till next week for my order
gotchu, will open
America?
nah EU order, but raw zinc is delayed until 3rd october-ish so order with it aren't going out until then
sharex does a lot more
- windows already comes with a sucessor to snipping tool

I just hated it when they suddenly put the snipping tool on print screen (I changed it but... whyy)
any recomendations on how to remove a stuck switch?
the puller doesent seem to do the trick
cause people did not get how the old screenshot tools worked
yes nice features like this if any info is sensitive
42.1MB Memory usage, 0.0x% CPU usage, it's prob more lightweight than windows tools
How is that different than snipping tool?
you get blur features, and features to mark stuff
Thanks for the fast reply. Removed the styrofoam stuck
nice
Enjoy your keyboard!
same here brother. Ordered black plastic prebuilt first, then saw the factory video with the white zinc case and had to order one to swap in a separate order
Ah yes
Screenshot program having a... DNS changer 
it does more than screenshots
also screenrecording as gif or mp4
OCR
and some other smaller things
Stuck with win snip tool as the work laptop is locked down tight
oh? not even sharex portable?
Finally got mine
I’ll check but It rejects almost all USB devices unless approved through IT
i mean can you download stuff
Nope it’s really restricted
A competitor got hit with ransomware and our IT went lvl 9000 with restrictions
I take my small revenge by reporting all company email as phishing
They send out fake phishing emails like once a week and if you click on the link it assigns you mandatory cybersecurity education
damn not supported on macos
The support is probably busy, I just receive my 80he and it not work, no light, no detection on wootilily, any advices ?
You tried another cable/usb port?
also using wootility v5 i hope
And it doesn’t power on at all with no keys detected?
yes nothing, i tried with USB C directly and with the adaptator
Sounds like time to open a ticket. Might have been unlucky to get a dead board
Wooting can diagnose and send you a new one at least if that’s the issue
I just passed 6h to lub my keycaps 😢
Why would you lube your keycaps? I hope you mean switches
yes sry x_x
Hi @ Wooting
I received my 80HE and was just assembling the keys
Reduces friction leading to higher WPM
Got to the Enter key (ISO UK) and it's very wobbly
realised none of the stabs added
Looked in box and I have some screws, but no stabs
😢 ok
you sure the small cable is properly seated at the back of the board?
Hopefully you can see the screws and key-puller bag
i'll check again to be sure
nothing else in box except the keys themselves, a cable, and l45 switches
Yeah. I mean worth a check just in case.
well that's one wobbly as hell enter key then

check the stems on the keycap if they are cracked
Any white zinc updates today?
looks fine but they are tight arse fits. But even once fully pressed in v wobbly compare to my fullsize HE
ahb - hang on
wasn't fully rammed home at bottom
Was just going to say if it's pbt keys
That pfp is gonna give me nightmares lmao
thx it was that X_x I was so scary
oh nice
Well happy days. Worth a check always.
yes
thanks and sorry for any alarm (on my side)
thx all !
Can't wait to try it out 😊
NA warehouse be slacking 
Not a keyboard guy but first impression is amazing switches feel nice 🥰
Thx again 🙂
Impressions so far?
full lub, the sound is incredible, have to try it in game.
Writing with is amazing actually
Vegas bros where we at
Can‘t wait to get rid off my current xtrfy keyboard
3 weeks!
Batch updates are usually early AM
They already got their keyboard
Not everyone

i do need my raw zinc 80he before shafie, otherwise i'll get downgraded to tier 7 80he citizen

And I need mine before @glacial wedge so I can laugh back at him

Imagine waiting over 5+ months
Meanwhile giga chad 2nd wave will only wait 3 months
WHAT
Well, we got founders perks!



