#🌟│wooting80he
1 messages · Page 52 of 1
oh it's big hah
Damn, looks like I can still get a new FC660C but price is now $500
recolored jades maybe
fake Jades?
thats what it claims to be, very well could be a scam though 🤣
genuine recolor or fake jades, id do some more searching before buying it
yeah
who would want a recolor anyway the jades look so... jade already
can u dm
Why do people prefer corded keyboards?
Because my keyboard is always stationary
Yea it's not as big of a deal as a mouse, but it's still one more thing to plugin every day when I get to work
and one more cable on my desk
Wireless will just add extra cost to me for no reason, add the hassle of charging and potential of battery failure. Just makes more sense to stick with wired for me. I also use a KVM so I need wired peripherals to use both of my PCs.
I have a KVM wireless dongle works just fine
My KVM is built into my monitor, wireless didn't work for me 😦
I have a wireless bt keyboard for my laptop because it sits a bit off to the side and also the internal kb is dead
rip
for my desktop tho, corded is just better
laptops and pints of beer don't mingle
I have 4 computers plugged into this monitor. Only has a 2 way KVM, so I'm better off with a sofware one. Except multiplicity won't work because I can't install it on my work computer, but I was able to scoop powertoys (which isn't as good but in combinationw ith monitor KVM I make due)
I don't see the appeal of wireless keyboards aside from like a media PC setup
Mine is too, it should work find with one of those wireless dongles
I'll have to give it another go and see what the issue was then
cordless anything is better (excpet maybe hardcore gaming). I have so many cables with these 4 computers on my desk
I def see the appeal for it, it's just not really appealing to me. tons of people have use cases where wireless is nice for them.
which monitor?
GB M27Q
I wire my internet still, but would love to ditch the cord on my keyboard
wouldn't want to switch back to wired mouse but for keys it don't matter to me
Maye plug it into the computer directly first to make sure it works. I'm using the dongle with the KVM on my Samsung G9 and it works fine though.
Yeah mouse makes sense you physically move the mouse and cord creates drag
Or if you have admin on your computers just get Multiplicity that software KVM is amazing.
plus you can share your clipboard, and speakers etc.
ooo ill have to give that a go for sure then
Or you can try MouseWithoutBoarders if your on windows only. It's part of powertoys.
Hello everyone, on wooting webpage it is written, that Wooting 80 is expected at warehouse at mid-july, I must get the keyboard before august, should I pre-order it?
powertoys is free, but it seems to disconnect which you get an admin prompt, or when my work computer would go to sleep; I could not wake it up with ctrl-alt-delete. Where as multiplicity worked fine.
If you "must" get it before august then get another keyboard.
estimated delivery for first batch is like July-August
These are nice https://www.store.level1techs.com/products/p/4-port-km-switch-with-usb-32-gen-1-mouse-roaming-function
BEFORE YOU BUY! If you intend to use mouse roam please use with only a single display (real or virtual) per input. Microsoft has disabled the ability to use more than one absolute co-ordinate pointing device in some windows updates. *** Do you need a KVM but without the V part? Maybe you can se
but I don't have admin on my work PC, so I use Powertoys anyways, I was able to scoop install it lol
Oke, thank u
In an ideal world, stock makes it to the warehouse mid-late july and it ships out in august.
U too
But delays could happen, thats why I wouldn't preorder if you need it before August.
Oh nice, this has the mouse roam, so I just mouse to the next screen and the keyboard and mouse auto transfer over?
i dont expect any delays but yea can happen
only use with single display is pretty limiting, but it would work for me
They are gonna be slammed with 20K keyboards to ship out, it's gonna take a while if you are on the bottom of the list.
Video explains it better than i can https://youtu.be/vieCb-qQPD4?si=ptEbbM7qXubjkSXc
Check us out online at the following places!
https://bio.link/level1techs
IMPORTANT Any email lacking “level1techs.com” should be ignored and immediately reported to Queries@level1techs.com.
Intro an...
I was looking for a hardware solution since my work PC is so locked down.
Yeah I've heard good things Wendels a bit a magician 🎩
yea this is what the multiplicity / powertoys allows me to do with sofware, only I can share sound and clippboard and even copy files too
I would only buy that if software wan't an option (sometimes it isn't)
Basically with multiplicity I can have sound coming from all the computers at once. However the sound thing can be a bit glitchy
Also some Dell monitors have the auto roam KVM built into them too, and if you chain them it works across multiple displays
at least I'm 90% certain I had that working at the office before the pandemic
Hello Im new here, I ordered my Wooting 80he yesterday and Im located in America, does anyone know around when my keyboard will be ready? Any help would be greatly appreciated
You can check here https://hub.wooting.io/my/orders 
Most likely late July/early August
Great, thank you!
Question i have wooting one tkl and the key press feels extremly rough how can i fix that ?
probably with lube
do you have 205g0?
Do you have spare switches, otherwise try swapping it with a key you don’t use much. Lubing also worth trying
Its worth at least opening the switches. See if theres dust. Clean and lube.
I ordered the white alloy case, but I think I'm going to want different keycaps., maybe gray or blue or something
lube it, i lubed my switches the other week and it made a very big difference
my one is a lot of fun to use again
Thank you
i used the lube and tool set from the wooting store but you can probably find similar elsewhere
I was sad as I ordered 80
i ordered 80he and still did this
makes it nicer for the next person that gets it (or me if i need a backup keyboard)
Question before you use the lube where the keys kind of hard to press in your opinion?
i just lubed every key
before, yes
my wasd and qwert were very scratchy
https://www.youtube.com/watch?v=WN_-GYLTfpY heres a video showing how to take apart the switches and lube stabs
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
https://www.youtube.com/watch?v=aXrQOLGuVgc here is to show how to lube the flaretech switches (the ones wooting one uses)
Learn the do's and don'ts of lubing a flaretech switch.
Lubricants:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
Tool kit:
https://region.wooting.store/products/blank-mechanical-switch-tool-kit
➤ Follow Wooting online: https://links.wooting.io/?id=VYzZf
➤ Twitter: htt...
you will need a bunch of stuff
to be honest i kind of think getting the kit from wooting is going to make your life a lot easier finding everything
but yeah it will make typing a joy again

just know that it will take you about 4 hours to do the entire process so make sure to plan ahead on a weekend
Do you have the link for the kit ?
make sure to select the lower option
that will also include brushes, a switch opener and everything else you will need
Ty

You prepping for your 80HE build?
can anyone cash app me 200 so i can get a wooting 60he
sure
actually
just submitted my pre-order 
aww man
I wish i could just speed up time and get it rn
same 
put my order in today also
what configurations did u order ? :0
also curious abt ur order too !
ouu both are good picks
part of the club now
one of us
wait i need to get that role now
rappy snappy sounds like hell in valorant but godly in overwatch
ayoo
boo
Dude im so confused at check it says its like 271 then as soon as i go to pay it changes to 323
It like applies a discount then removes it
Order done anyways
Will rappy snappy work for single key pressing only? To understand it right, it wont be so good for games like wow, where I e.g. press ctrl + 1. It would disable one of the buttons right? So in theory better for fps games right? 
Im not sure i understand it correctly
Im assuming youll be able to disable it in the software
Yea of course, hope so
But its just whatever key you press harder is priority just press them both real hard
So what happened to the supposed knob module?
Knob
Rappy Snappy only works on 2 keys that get paired, A and D is what they demonstrated.
So you don't have to worry about other key combinations, it's mostly just there for movement in FPS but am sure people will find other uses for it.
@umbral locust how long till the roles pop up since ordering?
a few hours, you just gotta refresh the hub
heard that, you play r6 at all?
When adding to cart, it shows discounted price sans shipping and taxes/duties.
At checkout it displays full value - discount + shipping + taxes/duties.
nah
I figured as much but i was already at checkout like i said it was literally as soon as i clicked pay that it changed, figured it was just a bug
Likely calculated shipping/duties when you clicked to pay. Ex filled everything out then left shipping details until the end?
No like everything was calculated then inpress pay and says proces have been updated so maybe, i dont mind though just thought was weird
As along as the invoice numbers add up = what counts 😊
the 80HE daughterboard, can it be seperated by hand from the 80HE Module Mainboard?
and if it gets damaged can we order daughterboards?
hands is probably the prefered implement
yes definitely
my k70 died because its usb port is now mangled
i dont want a dead daughterboard to leave me from using an 80HE
if i remember correctly daughter board comes with every case, i'd assume you'd be able to get them separately as well (spare parts and all)
i bought it as an AIO package in black zinc
but ye i wouldn't worry about it much, the fact that there's a separate board for usb port is good for repairability, worst case scenario you get a spare part and plug it in yourself
you could always resolder a new usb port onto the daughterboard 
or take it into a tech shop that does soldering to do it for you
No updates this week?
It's Thursday, so maybe today, maybe tomorrow 
I guess further development regarding on how cases look 
I'd say it's too early for knob, but if I'd say it, then there'd be definitely news about the knob 

By any chance, do you think it is still possible to add items in my order ? I only bought the 80HE Module and the case, but I want the switches aswell now...
You have to send an email social@wooting.io
Ok thanks !
im pretty sure it has warranty
those repair places would probably charge you like $50 to solder for you
a knob is confirmed? wouldnt that have to be an entirely new order
sounds cheaper than buying a new keeb
naww, if you plan on soldering more than once, it's way better to just buy your own soldering equipment and supplies
yeah but a lot of people don't share the same interest in doing so and that's fair
oof, imagine being rich
or maybe you know a guy who knows a guy
oof, imagine having friends
Nope, there wasn't
There’s a simple solution for not breaking the port - make it deeper, just like Angelbird https://youtu.be/ut2-74s5UyE?si=_LhPW5apx8JIcCNF
Check out my Freebies & Premium Products!
https://gumroad.com/boonelovesvideo
In this review I take a look at Angelbird's CFast 2.0 Card Reader. To learn more, go here-
Angelbird CFast 2.0 Card Reader -
https://bit.ly/2XGrDSr
The Han Solo Rig
https://youtu.be/iJV9CABY3Pc
*Affiliate Links Below
Angelbird Match Pack - Blackmagic Pocket Cinema ...
Video/Audio Professional gears often employ solutions to reduce failure points. The reason why PC industry doesn’t have these designs is that PC people don’t want to pay overprice for good design
Apple people on the other hand, over paying for their shitty laptop designs as Louis.R has pointed out for years 🤣.
or you know, offer reasonable replacement parts
like USB daughterboards (there legit are good open source ones)
is it possible to modify your order
do we have any pictures of the ghost keyboard with rgb on? would love to see how it looks!
yes by emailing us
Being able to buy spare parts is the reason I support this company. But the durability of a product is by design. Overengineering FTW 😉 .
Yes you can. through the customer support
I am wondering if the number 6 ( silicone gasket mount ) will become yellow over time in transparent cases?
Only one way to find out I suppose.
or there are used special materials to prevent this?
silicone yellows in absence of sunlight?
i mean, as i know silicone can become yellow bc of sunlight's UV
You're saying that keeping it in the dark causes it to go yellow. Not having it in sun.
presence* not absence
it was a copy past from google 🙂 thats why i have deleted it.. i think it becomes yellow bc of the sunlight
or am i wrong?
UV to be specific, it might, yeah
Well it's hidden away below the PC plate, switches AND keycaps. What sunlight would it receive?
You can't see it, sun can't see it.
Context always helps.
ye
I don't think it'll be a problem, unless you specifically leave your keyboard in direct sunlight
I don't have that answer for you, but I'll pass it along.
I‘m installing a uv light inside my 80he to see if it yellows
thanks 
Should be ok, my setup is still pristine
Banger setup, touching grass while at the computer 
All you need to touch grass
Would you look at that 

Work laptop 
does the pre order mean that i dont need to pay again for the keyboard if i want to buy it?Ik its a stupid question but its my first time doing these kinda things
💀
Yeah, you need only to pay once, during checkout 
Unless your country has separate import fees? Yes that is what it means.
Just making sure, I won't pay customs in France, I already paid taxes at checkout right?
i can imagine my mom asking me the same question when i wansted some shitty game i cant remember 15 years ago
Correct
tax is always included in the price/shipping
Please stop spreading incomplete/misinformation 😛
in eu for sure it is
That is ONLY the case within the EU, US and CA and UK.
@buoyant solstice @hoary quiver just making sure, cuz I once bought something and had to pay 50€ of customs and I had 2 items, so in total 100€ more
from where
you pretty much know where I think, it has been fixed now tho
I have literally no clue what you're talking about. But suffice to say if you import things from outside of the EU, you're going to be paying import duties.
Ohhh from where, the US, finalmouse
Well there you go.
Yeah ahah, I think that they now take in charge import fees now tho
im not sure if mine does ngl
for the uk do i need to pay import fees or?
Yes, it will show at checkout
even in eu it's not always the case, i've even been slapped with additional fees on top of the usual vat when packages arrived (not from wooting obviously, and it's rare in general)
so i basically already paid when i preordered?
Yeah
Yip
ok ty
Pinged me twice for a question I literally already answered a few posts up 😄
im sorry i didnt see it
You can mix somthing into the silicon to reduce the effect but why do you need to expose the keybord to UV light (Sun light) ? You know that LED lights don´t have UV in them.
bc my room is always sunny?
No room in this world is always sunny
do u understand everything literally ?
@dense ridge The problem of yellowing of silicon has a cure. As a sneaker head and fan of Jordan 11. You want that ice / transparant outsole https://www.youtube.com/watch?v=Uuo6VSDpaas
In this video I will be showing you guys the correct way on how to get your old yellowed soles back to factory fresh conditions using Fabes Sole Sauce!
Order Your Sole Sauce Here: https://fabessole.com/collections/frontpage/products/secret-sauce-4oz
Subscribe: https://www.youtube.com/channel/UCKAWqEIb3oa5m_rrN0rsVWQ?sub_confirmation=1
Follow ...
You´re presenting a problem that is unrealistic that´s all.
Ladies - To your corners please.
Here´s another one for plastic https://www.youtube.com/watch?v=SGDZ7sb2aQ4
Support Noel's Retro Lab on Patreon: https://www.patreon.com/NoelsRetroLab
Full restoration of a Commodore Amiga 500: Cleaning case and keys, retrobrighting with hydrogen peroxide, removing rust from RF shields and painting them with galvanizing zinc spray. The change is stunning.
Music by nene https://opengameart.org/content/theme-song-8-bit
...
or look at this.. i would really dont like to have a gasket mount silicone in my keyboard so yellowish
just buy black case if you are that scared of yellowing
thats why its important to know 🙂 to decide which case to buy.. ghost or solid black
maybe they have added some other materials to prevent this.. and in that case i would just get a ghost one
The case is $10 so take both and if you see your gasket mount turning yellow swap case
The only company that have a warranty against yellowing is dbrand and Rihnoshield https://www.youtube.com/watch?v=6fTabIRax_Q
Clear cases often turn yellow over a short period of time. Well, ours doesn't. Here's how we know:
After 168 hours of SGS’s anti-yellowing and aging experiments – which consists of intense and extensive exposure to high-temperature UV lights and extreme levels of humidity – Clear was still able to maintain a clean and spotless look as if it was...
it will be already too late bro
the gasket in the keyboard is not gonna be exposed to the same amount of uv as a phone case that goes outside in direct sun (it's also most likely a different material so we can't really compare em)
glass in your home blocks uv, even a translucent case will block some, smoky one more so than the "white" one
It doesn't block enough to be invalid however. Look at any old computer.
None of them have the same properties as the gasket used in this keybord. So unless you add some color it will yellow. Not even Nike can make it happen. I doubt Wooting will be able to.
I dont see it as a problem since there´s a cure to bring it back to cocaine white
or just buy a replacement part if it gets unbearable.
Pretty much all materials are affected by sunlight to some degree. It is a star with unimaginable power. What you're asking is if the change over time will be noticeable, which probably depends on your environment and perception. We're not reinventing plastics, do current products on your desk discolor abnormally quickly?
my white superlight is becoming yellowish in 1 year probably +-
depends on how old we talking about, if it's some REALLY old plastic it might even be the variety that yellows without any uv exposure whatsoever
but ye, safe to say everything yellows, the only question is whether it's quick enough for us to notice
My point stands - That plastic yellowed as a result of UV.
I mean depending of where you live . Heat, humidity cold will affect the material too. Can´t protect against everything.
My 2.5 year old gpx isn't yellowing
If that's a problem for you, perhaps go with zinc instead. The paint would be more resistant to change
as i said my room is very sunny
Hi. Three days have passed, but no one answered me about checking the card. How long should I really wait?
Or wash your hands after eating Cheetos 😄
As was mine for 2 years of that
none is arguing that, actually, none is arguing anything
just adding that it might even yellow without uv involvement
Expect at least a week I'd say, they have a lot of tickets rn
you can actually get a window tint film just like cars. There are special one made for residential applications
its bc of sun Mark, my all devices are super clean
after covid i am washing my hands like 10 times in a day if not more 🙂
My room was in direct sunline for like 10 hours a day + I live in the mountains so the UV exposure is even more
You're still missing my point.
The original argument was that windows blocked UV - That is not the case as I have counterargued twice now.
then i dont know what to say
Shit rng
even my apple earpods becoming yelloish in some parts
Bros got the cheese touch
If you live near the equator in a region with less moisture in the air it can be more intense
@dense ridge I use product from this company ( 3M has a company too that makes similar things https://llumar.com/na/en/architectural/residential-window-film/solar/
Solar control window film is an affordable way to upgrade any home’s windows. Discover all of LLumar’s solar control window film for homes.
we didnt have to know that one...
Lmao
if it was possible to get black silicone in black transparent case it would be nice.. but i guess that it will request a lot of work to separate two modules...
The sun has never been a problem. 🤣
Imagine gaming with your blinds open
my bad saying that it blocks uvs as in all uvs, 'partially blocks' would've been more appropriate
they are proposing a lot of choices already
i am speaking about the white rubber wire of the earpods
surely
Am I right @nova nexus? (I'm not managing tickets so you might be more qualified than me to answer this)
I don´t think he is looking for a solution 🤔
He is, he wants black silicone, but maybe he can paint it or do something by himself so it's black instead of the current white color
dude, its just a question about the durability of the silicone which is used in the keyboard to get an answer to from Calder or somone from Wooting team who knows from which materials the keyboard will be made
i think hes just being racist at this point
?
Like I said quite a while ago - We do not have a clear answer about this, but I have passed it onto the team.
Maybe if you're lucky enough a wild Calder will appear here sometime soon and you might be able to ask him, or worse case scenario you can make a ticket, which will take quite sometime to get answered
btw, if the gasket yellowing worries you, the keyboard comes with white pc plate which is more exposed than the gasket itself
I understand your question. But I also understand production, R&D. if there´s a solution to your problem. It would have been on the spec sheet up on quoting for a certain material. They would say somting along the line. if you want UV resistant = 5dollars more / litre
https://www.3m.com/3M/en_US/p/d/b40066965/
@dense ridge but in general if gaskets yellowing is important to you i'd just go with a black/opaque case and be done with it
@buoyant solstice is something unclear in my sentence?
Read the message immediately above yours.
Oh yeah, but if you passed it onto the team, maybe Calder has an answer or am I not understanding something properly?
I think this info is incorrect (it's always been $1000) for NZ
I don't recall mentioning New Zealand with a single word in the message you just quoted.

you said tax is included in all of those countries but i'd say NZ is also
unless you order something over $1000 which is unlikely
No. New Zealand just happens to have very high minimums on import duties.
4090
but i wasn't really pointing out that more so that the info wasn't correct on the page
Again you're mixing things up, Just because NZ has a very high minimum on import duties, doesn't mean you aren't on the hook if you go above.
Go ahead and place an order for an amount above that minimum limit, and tell me how you did not pay import duties, after you've been asked to pay them.
only a day until weekend, hang in there
Oh I'm already out of office. Easter tiem 
im confused it says $400 but it's actually $1000
can u link it
Then feel free to send us an email about that. None of that has -anything- to do with you quoting me and starting this entire conversation to begin with 😄
i wanna read it
alright mb i got kind of sidetracked when finding info and forgot i still was replying to your original message

Any knob news?
You’re in the wrong chat 💬
I dont think so
no he's in the right place
Not yet, apart from it quite possibly exists 
So there’s a knob on this keyboard?
its coming
Knob addon
what is the earliest batch delivery date for EU? is it mid august?
Late July/Early August or thereabouts
It’s not what I bought into 🤔
Or just not buy it 
Do I need to sacrifice a button?
Ok I see
If it even works like that and isnt just exterior, personally i hope for a 1 key sized knob
I like the clean design without a knob.
I'll be definitely sticking a knob on UwU 
I said it before, should have just made a modular port or something for people who want to add stuff like Framework
But it'd introduce more PCB complexity and make it incompatible with older keyboards
Hmm tho wooting he keebs are compatible with knobs?
Because I dont think so it is plug and play
Oh boy. If only I could spill the delicious beans on project Knob.
Soon though. Soon 
I am pro choice
sure is it when your device is full of sensors all over it 
Place knob on desk
do spill
Knob knob knob
knob soup
it do
Were
External knob maybe?

top row
the only question now is whether we're getting 1u knob (basically a screw with a magnet at the end of it) that we can put ANYWHERE or something like the pic 
yea that one
And I don't think they would release something that is not compatible with "older" keyboards
Mode button is needed
its not
Fn+Esc 
I don't use it even as a fn bind
do u spy what i spy
He won't be able to answer, the only think he knows/can say is "Soon™"
I just got all 4 profiles mapped out instead
Well I would buy tungsten knob
If you want leaks, you'll have to coax them out of Calder 😛
Being the CEO kind of bypasses NDAs
What is f13 even for?
It goes all the way to F24. No one uses those keys any more. But they do exist.
Oh good to know
I didnt know about f24
tho f13 could be used in arma3
He will for sure leak something in a coming livestream, if he doesn't then it's not the real Calder
No leak = ai calder
Might find some by just taking a few trains arround :p
any idea why the shipping price has gone up so high, it was 57.00NZD now its nearing $100
You ordered more, so the weight is increased? Resulting in a higher shipping price?
or maybe "screw" is a dumb guess, whatever it is it prolly needs to behave like a rotary encoder and not a min/max thing
unless of course 80he could be turned into audio mixer 
No its the same order but separate to my current one, do they stack shipping between orders?
Throw me some order numbers, and I can check real quick
EUxxxH
A 1u knob that fit on a switch so you can transform your kbd into KNOBS
EU6969H
april fools day is coming though 🤔
a knob could easily be integrated on one side of the keyboard (for example the left one, that was never pictured on mockups yet...)
it's okay I have an existing order with $57 I was just trying to amend my order to swap out a switch pack but with the current shipping with Feddex I won't bother cancelling and reordering. Happy to wait for assistance anyways, was just a little confused why it kept rising
example on another TKL (DesignedByGG's Berseker)
ugly
Add built in alexa and then tell her what to do
think smarter not harder 
You know thats scroll wheel
indeed, they integrated it rather roughly... no doubt Wooting could come with something more refined.
@lofty gazelle we already seen case design
how about training alexa to do multiple things then plant it into the keyboard and voila
Okay I figured out why the rate increased it was the addition of the Gateron jades surely that wouldn't have much of an impact as all it is swapping switches
The case design was always shown from the right side to my knowledge.
Knob reveal will be in 4 days
If you were just under the limit of one shipping price option, and the switches pushed you over that'd explain it. Feel free to email us about it for clarification
they surely have to have a 3d sketch of the keyboard before they made it
I have sent through an email a little while ago to amend it by swapping the Lekker 45g to the Gateron jades, i'm happy to wait as the shipping date is months away anyway
just hack into their pcs
I don't know if it's the case for the fully built keybaord but I know that the cases are rendered and not a photo
I mean its most likely
that they made a model for the fully built keeb
i'd be curious what the margin was for the rates to go up must be the smallest weight difference
@tight cypress knob reveal will be in 4 days sorry for leak
Couldn't tell you. It's on a per country and per courier basis. And that's Mark's territory
no worries, i'll just wait a few weeks for my query to be seen
itll fly
Yeah
That 75%
Through the window 
Bro, did you enable the watermark option just to flex your phone? That setting's disabled by default
It’s more like, Samsung forcing everyone to do marketing for them. 🤣
? I said it's disabled by default 🤔
If so why do you care at all bro chill he just loves his phone)
I don't. It's just funny
Depends on who helped out setting up the phone. I bet you if you buy it from brand store the seller will get a bonus for every phone they prepp with water mark. It can also be preset by some carriers.
The fact that the feature is the is kind of cheesy
its fire
Sorry with the phone watermark,my phone set by my friend previously
Ill disable it
Is it possible that we get plastic case vs zinc case sound test before founders campaign is over?
I kinda need it to decide what to buy
Before the founder's campaign? Can't promise that. But definitely within the window, where you'll be able to change your order around.
So you are saying i can just buy and i can change after sound test?
Yep. We'll be allowing everyone to switch their orders around for as long as we're able to.
❤️ Thanks for that, that is amazing
No need to be sorry, I feel sorry for you to have a friend who deliberately ruining your great pictures.
Will there be a video of the final version of raw zinc case before the founder's campaign is over? My purchasing decision is basically based on how it looks lol
Any video coming in this week?
After holidays
Hi, I just bought some Jade switches and swapped them on my 60He. But sometimes it will “double tap “ when I pressed keyboard only once, should I do something in wootility after swap switch or I just didn’t install them properly?
I updated the latest firmware
Already tried but nothing change
#1222567614815928390 message have you tried calibrating keyboard?
Could u tell me how can I do that bro
Unplug the keyboard.
Plug it back in.
Wait 3 seconds before pressing any key.
if that doesnt work
Unplug the keyboard.
Hold down the two keys for your model (Refer to the image).
Plug the keyboard back in.
Let go of the keys after 3-4 seconds.
Go to Wootility.
Settings.
Troubleshooting.
Select your Device.
Select your layout.
Restore.
Oh I see a new update 2.7.3beta 5 I will try that first
Thank you so much
pro choice
inb4 i cover the entite nav cluster with knobs
Oh
Correct
I see you’re a man of culture too 😉
can i get a time capsule from yall also
i can waaaiiitttt
how i do i get my role tho?
im so freaking excited
from wooting hub
just sign up with the mail you placed the order with
then you can claim the roles there
@old solstice what did you get
80he
just picked up some keycaps time to change my order
I think he meant which version
Which ones 
these
Ooh clean
with dualshot 2 accents
I just got my drop keycaps in the mail, gonna move em to the 80he when it gets here
Sick, i always love builds with those lol
yeah i was gonna get the dualshot 2 but international was unavailable everywhere
so i just went for this instead, ended up being cheaper anyway
The ones with the little notches for light to go through are my favorite
yeah ill put that on my caps lock
i think i'll also like the step, makes the caps lock stand out more so you dont press it by accident
Yeah those are underrated
now i cant wait
i was thinking about getting different accents but i think these are the ones to go with
other ones i was thinking of is these but i cant use that many of the keys so it seemed kind of sad
Yeah those ones would be very limited in use
if these had better iso support i would have bought them instantly
Yeah, the colors are quite nice
i also like the more abstract interesting icons
thats what i typed??? its in my name??? am i missing something?? hahahaa
im new here obs
I mean which color, keycaps all that stuff xD
case...
He means just black, ghost or one of the zinc ones
^
oohhhh!!! i got the ghost! with the standard linears bc i wanna try it stock 1st
i think ima pick up the gator jades
these remind me of grade school dont ask how old i am
😂😂😂
Oof
Friends, I would like to ask if I cancel my pre-order on hub. Generally, it can be processed in a few days, and the refund can be reached in my bank card in a few days.
Sure.
can I make purchase with raw zinc option and change it later to white if irl raw looks bad? no photos make me wonder...
Yep
haha I made preorder at first day with ghost pcr option, thought I should just go for heavier weapon
I pre-ordered two wooting80he before. Two days ago, I applied to cancel one of the pre-orders, but why haven't I processed my cancellation application yet?
You've waited for two days, normally it takes 3-5 days to process
Thank you, bro
Wooting itself is also swamped with a backlog of stuff to do. They said that payment related things are prioritized, but unless preorder cancelation is automated in their system you may have to wait an extended period as well.
OK, thank you for your answer.
I have a set of this I may be down to sell
I need better iso support on them :/
I have this and the base kit and I wont ever need ISO keys
Other than the enter key I always forget what's different about iso lol
smaller shift on one side?
In a nutshell
Damn JIS is a whole remix
Boys
Jis is funky, love that
I need the the bast option for fbs Game like overwatch and cod for the keyboard
just place an order for the 80he
super excited
kinda curious to see what the ghost shell will look like with black keys
are there any offerings for people whoy bought the h60 and wanna upgrade to the 80he?
Only if you happen to have been part of the 60HE founder campaign.

will there be more styles available later for keys :o?
is the preorder cheaper
No.
so the same price
Yep
damn
what does it mean i only got 77.5% rewards . -.?
Its a joke, cuz its not a true tkl
ahhhh lol
We gladly welcome you to the piss squad however 🤝

welcome in the waiting room 😄
im excited
oooh, what do they get?
Does this also mean that in the future, me preordering the 80he might give some benefits in future fund raisers?
A 20€ discount on the 80HE founder
not cheaper but you can save in order ways like, you'll get a free switch pack with the preassembled versions now, and zinc 80he gets a travel case, tho price will remain the same for the board i guess
uhh i ordered the 80he...did i somehow enroll in some newsletter? cuz got some mail for becoming part of the founders campaign
by ordering the 80he
Yea

Its on founder campaign for 80HE rn
We own your soul now. It's all part of the 87 page terms of service.

Jokes aside, you should have an unsubscribe link at the bottom of an actual newsletter email.
first preorder yes, but what about second preorder?
why not 3...
Then youll be moved to the second batch instead of stayin in the first.
Have they shipped any 80he's yet or is everybody waiting until July?
Still in production
I think we all will have to wait 😔
PRE-production.
Oh wait what
Meaning they have not started to produce them yet
Yea I know that but I swear we were at starting production stage
Had that been the case, we would be delivering earlier than currently estimated.
The website of names

Memory failing me I guess

What would be estimted production and delivery time for later batches 80he? Around 1month?
Yeah, should be behind by a month, like current 60he batches.
Also any thoughts of making a plastic alumaze? I'm trying to find a good plastic case that supports a gummy o-ring mounted 60HE but its basically only making my own or painting the default case
Hopefully the paint will make the default case a bit less thin sounding in the process
You do not like aluminium case?
Yea it doesn't really suit the HE switches too well imo
They're already on the higher end of the frequency spectrum so adding more feels iffy
EU-Kampioen is the first batch right?
You could foam but I'm not really a fan of the sound so I've basically settled on plastic or something similar
so no second batch for the 80he yet
That or NA-Champion
yea okay i mean for eu only
Wood works too but I'm going for a purple case so its a bit harder to do because of that
I also don't like the aluminum case
Default case ended up sounding the best for me funny enough
Its just on the thinner side so I'm trying to find ways to either make a thicker case myself or get the default case to not sound as thin without foaming it
@buoyant solstice
You can called it the PBTmaze 
you get in to second batch if you order more than 3
who would do that xD
what are we talking abt
i know this is an older message, but what really is the point of this (dont see this as me complaining please im just wondering). im not gonna say no to an extra set of switches, but since i already have a full set coming with the module what would i use those switches for other then just sell them? its cool for people with multiple boards but id guess most people dont get a use out of this.
Don't want em, don't get em.
They're our way to make sure you get to try out our switches 🙂
I mean free is free
oh, i totally brainfarted on the free oppertunity to try out both versions if you arent sure which one you prefer
Yeah only annoying thing is you can’t choose which switches come preinstalled, would be nice to see an option for that but I understand it could increase costs
Increase costs and reduce the amount of keyboards available, since we have to split them up even further into sub-products.
yea, it’s understandable
secretly its to get people into keyboard modding, since changing switches is the first step to that 
I would probably try out the l45s but I think you need to get some switch tools and I don’t have them
A combined keycap and switch puller will be included with the 80HE
🐐
hey Mansen I have a question about the 80HE's daughterboard
Too bad - I know shit all about it 😄
Do you happen to know the actuation and fully pressed force of the drunkdeer switches. I never actually researched since I just like them.
Jw for comparison to the l60s
I guess an second set of 60s as Spare part's could make sense...
Oh didn’t see this, thanks :D
oh ok, is there anyone who I can ask about it?
ask here
Calder on the next livestream I spose. Or shoot us an email.









All we can do now is wait until it comes in, still so excited
is the 80HE going to have hand detatchable daughterboards with replacements on the websites we can buy?
my K70 died because the USB port got mangled but otherwise its usable
Like you mentioned the daughterboard will be detachable. Futher in the founders campaign there will be more information about this. The good news is... no one is in need of a replacement at this moment in time. so im sure you can wait a little bit more for more information!
ok its just cause I dont want the USB port to determine whether my keyboard will be usable or not
thanks, im still kinda frustrated
What you gonna do without keyboard
Anyone know if we are able to modify our pre-order?
Yes - Email us at social@wooting.io and we'll be able to make most changes as needed. Thought if it is an 80HE order it might be a while.
Would i be able to change plastic black to zinc white?
We're pushing those off for a bit while dealing with more time sensitive tickets. And hopefully be able to add a bit of automation for the most common changes. Like a case change.
I’m a first time customer so I impulsively pre-ordered a pre-assembled board. Now I’m looking to change the switches to the gateron jades instead 😦
That way I could also try out the lekker switches
Can't change the switches that are preassembled - But I think we can change the order to a module instead, and then you can pay for the jade switches as needed.
i have my very old, laggy and scratchy G810 orion spark
G810 aha, that’s the board I had before 2he
Going from that thing to 2he and experiencing all the features man it was nice
All I miss is a knob of some sort but looks like wooting is working on that now so all good
G810 volume roller was cool until it stopped working or skipped a lot
oh yeah that was an oversight
The double typing got annoying too
on the G810?
Yes that’s the thing that pushed me to order the wooting
i cant really do anything too difficult
i can only play casual games for now with the G810
no hard geometry dash levels for me D:
maybe if the Q1 HE is good I will be able to use it before my 80HE
I guess the 80he upgrade for you will be even bigger then lol
Even in casual games tbh I really like some wooting features, like toggle key for peak laziness on the w, don’t have to hold it to walk 
80HE kinda just feels like an engineering masterpiece
Q1 HE, day 1 backer
also day 1 for 80HE
Nice
Why is the US late july and EU early august?
Shouldnt it take langer for the US to receive the keebs
I mean... geographically the US is closer to China than Western Europe.
But - But - BUT - The dates are all estimates for the time being. All of the keyboards should finish manufacturing at the same time, and it's a matter of shipping at that point.
Just ordered mine I’m sick of Asus
A 
100% that wizard
I like the look and feel of their products but their software is awful and the mouse I have also from Asus is only 4 months old and already has double click. Swapping that for a Superlight as we speak as well.
Take good care of your superlight
Keep in mind that dust accumulation and very forceful clicks can cause double clicks
So if you feel double clicks or loose mouse wheel on your suprelight
Open it up and clean the inside
Maintenance is good 
Scientists baffled why Logitech still doesn't use dust proof encoders
I recently replaced my encoder because of that issue with a TTC Gold dust proof
Definitely RMA it (and if they don't make you send it back time to replace/clean the switches on the old one...)
It's late july for me too. I'm in canada but the batch is the EU one.
ever since i preorded my wooting 80he tme has moved very slow lol
that's a life hack
I feel like time is moving way too fast maybe I should order another 80he
or another three if im being honest
True things do get out of hand, I have 2 60hes and plan on a third lmao
But why?
I like to expirement with stuff a lot
different cases, switches, keycaps etc
I feel like 2 is enough because i always have one ready to use and one being modified but always tempted to have one more lol
Fair enough
hey all, im thinking of ordering and was just wondering what the founder campaign free switches are for? are they better than the standard switches that come installed in the keyboard?
slightly confused haha
They're pretty much the same just have lighter springs inside so 45grams of actuation instead of 60
ah okay that makes sense. thank you for letting me know 😁
If ordering the jade switches for the 80he, are different stabs needed? Longer ones?
Think most people don't have issues with them stock
But if you do you can get TX long pole stabs for plate mount
ive gone ahead and ordered the 80he, i hope i didnt have to do anything to get the travel case except for choosing the zinc alloy chassis
Thats if you get 45s, you can just get more 60s.
stock keycaps? No. Other keycaps? Just depends.
just getting the zinc case is enough, youre all set
Think he referring to the prebuilt that one doesn't let you pick
oh really? I didn't know.
would you perhaps know how i get the discord role?
Yeah the prebuilt comes with 60s installed and gives you a free pack of 45s
Gotta link your discord to your wooting account
and then hit refresh rewards on your account page
I also recommend ticking batch updates
that way you get pinged in the discord when there is progress on it
yeah just gone ahead and done that, thanks for the tip mate
So we can get €20 discount if we already got our 80HE?
You only get the discount if you were a funder of the 60he.
I wasn't
Did you participate in another fundraiser?
Where u get this code?i dont get mine😔
No. I asked the wooting team for my cyan role and they gave it to me for free :D
Im curious on this too then
Yes,it my first time PO wooting keybs,i thought after i check out the product then i will get dicount code for next purchase
early august
I placed the order within 5 minutes of the pre order got a confirmation is the ship time the same for all orders
For now yeah if you’re not a bulk buyer/buying more than 2 boards
Once this batch runs out then people will end up ordering from next batch though
you cant share it?
the codes can't be shared. All the discount codes are the same, if they aren't unlocked in your account, then you can't apply them.
So what is your favourite mods on 60HE from all these experiments?
I've had custom keyboards for a long time. What should I expect once I switch to Wooting?
An exhilarating dance between man and machine, where every sense is heightened and every moment is alive with intensity. As you press down on the keys, the raw power surges through your veins, propelling you forward with a force that pins you to your gaming seat.
At first imo you will not be able to notice a difference, but after some time with it if you try to use normal mechanical keyboard you will feel it's less responsive and kinda slower than Wooting (and that's mostly thanks to rapid trigger)
At least that's my experience after using Wooting, DD and then trying to use my old mechanical board 😅
Prob a GMK set of some sort
if u get a 80HE u get a cable too?
Yes. A 2m straight cable with braiding
ok good
Just remembered that I ordered this keyboard and now I became happy
Now that’s a perfect description for this product. People these days doesn’t feel with their soul.
A Wooting keyboard isn’t just a keyboard
no announcement this week?
Because they do not work on holidays
@karmic canyon tho propably knob annoucement will be in 3 days
hi, i recently take the 60he instead the 80he but which is the best for latency ? is woth take away the 60he to take 80he?
doesnt really make a difference but technically 80he has less latency because of 8k polling
Do you need arrows and f row?
i use it for valorant so no
I guess no update this week as they said on the stream_
So no need tbh for now
If I switch from plastic to zink now, will the ordering time be extended?
It wont. But if founders are above 20k you would be put in later batch if you cancel. You can ask support if it is possible to change. Propably is but obviously with charge
So there may be extra charges for changing my order (from plastic to Zink)
Shouldn't be
Is it possible that the shipping date will be postponed?
Sure.
Thanks alot
Well only you would pay diffrence between zinc and plastic i guess
I only care about the delivery date
Thank you!
If you’re ordering within EU. You can add loads of stuff and still get the same low shipping cost. 😆
But I just want to get it sooner haha
Price is not the point
In fact, I bought 60he first and plan to use it until 80he comes.
Thanks!
IIRC it's 20k units - so presumably less than 20k founders
Rn it is nearly 17k
When you order, are you charged immediately? Or when shipped
Immediately
And sorry if dumb question, does the software work with jade switches the same as lekker? As in activation settings, etc would all be the same in wootility?
Yes and no.
The Jade switches are physically different, and only has ... is it 3½mm of travel distance. So if you set it to be too far in Wootility, you're just going to have unresponsive switches
Fair enough, thanks for the reply
Will there be a tutorial on how to assemble the Wooting 80HE Module? Because I want to put in the L45s, so why not assemble it with them rather that get an assembled one and take out the L60s.
Costly and complicated apparently
one day we get preinstalled l45
But putting together shouldn’t be hard just out it together like Lego and bam done
Yeah.
Also, what’s the difference between Lekker and Jade? Are Jade as good as Lekker for gaming? And what is the force to press the key?
I think jades sound nice
or something like that, prob little difference for gaming
Yes, but I want to know even that little difference for gaming.
30g-80g I think
So lighter or heavier that L45?
Wait nvm I don’t think that’s accurate I have no idea tbh
Ok.
yes tutorial coming
Is the frost plastic case for the module similar to acrylic? Or exactly the same lol
supposedly they’re similar to l45 tho i guess
Ok.
Because if all else is the same, the Jades have a shorter total travel.
So if they’re otherwise the same as L45 I probably would get the Jades.
It is simmiliar to ghost but little bit cloudy and white
Slightly heavier but tbh no diff jade is 50 L45 is 45
I would pick jade for the better sound
Lekkers don't sound too good
So not as foggy as acrylic would be? To something like this
Ok.
So wait, what is the start force and end force of the Jades? Because L45 is 30cN start and 45cN end.
30-50
I think 30cN and 50 cN but I would have to check
https://wooting.io/product/gateron-magnetic-jade-switches
If only there was something like a specification sheet on a ... product... page of sorts?
53 seconds · Clipped by JakubixIsHere · Original video "Wooting Live - Calder & Kevin" by Wooting
I would have loved to get an 80he but no modding capability
man I wish they had a tkl
It doesn’t say end force.
TKL isn't any more moddable.
There r a ton of parts 80% is so rare no parts
Thanks
is this for the new 80he?
80% is... tkl though
Correction: There are a bunch of different "standards" within TKL, where you may have 2-3 PCBs who happen to share some dimensions. That doesn't make it a standard.
Also what’s the difference between cN and gf?
No, this is the tofu redux. I just like the look and wanted to compare to the plastic frost case offered for the 80he. They look similar enough to me
different units expressing the same
oh ok
So they are the exact same?
no
Actually I think 75% is tkl but not sure
no
80% is TKL
75% is not a traditional TKL
What is the end force of the Jade?
Tbh tkl is perfect no one really uses numpad but I use func and arrow keys every day
1cN = 1.019716213 gf
50cN
Compact 75% = the dream
Where can I find that? I can’t find it anywhere?
I searched it when I was doing research for jades
So L45 is 30 45 and Jade is 30 50?
yes
95% sure
the difference is down to how newtons are defined as 1N is exactly 1kg accelerated at 1m/s² which converts to slightly less due to 1cN being 1/100th of a Newton while gram-force is calculated with our gravitational constant
🤯
for small numbers like mehcanical switch springs below 100gf this usually means at worst 1cN difference or so
1 kg or force to press a key lol
if you go above 100gf this just goes up and up though
That's like a baseball bat
So, at the end of the day, which is lighter, L45 or Jade?
L45 but it sounds pretty bad
So l45 is ever so slightly lighter but jade sounds much better
Man I want L45 but the Jade bottoms out faster.
Tbh it's not that big of a deal
So IDK.
Half a milimeter
4.0mm vs 3.5mm
I would fr sure get jade
How do the Jades even sound?
Also, why the Thocc??
But jades sound better have very low pressure and bottom out fairly fast
Thocc is life
Do you prefer like a higher pitch click
Then go l45 maybe
No difference.
Wdym?
Basically you don't care about sound you want performance
Yes, I mean I do care a little bit about sound, but it’s more about not sounding bad.
As long as it doesn’t sound bad.
Thats good then I could give you recommended mods to maximize performance and keep it sounding good
Mods?
Modifications
I know what mods are but why?
To maximize performance and maintain good acoustic
The mods you can do to the keyboard have no impact on performance
So anyways if you do get l45 prolly best for performance I would lube them with some krytox 205g0
I heard red paint makes keyboard faster. Needs further testing though
Actually they can reduce fatigue and latency
Different switches do not impact performance
No. Fatigue sure, but that is not performance. No mods have any impact on latency at all.
You can click faster so better latency
Again, no
So then L45 is best?
For fatigue yes
For me that’s better.
But jades are more sensitive since they bottom out fastest
WDYM sensitive?
Wooting is analog right
If you are concerned about latency, then use a low actuation, 0.1mm to 0.4. The switch used is irrelevant
Still reduced
I bottom out my switches so…
And since jades bottom out faster pressing one mm on jade will be more sensitive than 1 mm or lekker
That’s not how it works
Dan, I'm telling you, you're misguided
Again what do you mean by sensitive?
1mm is 1mm
Fr that's what a few keyboard yts said
Okay, but they're wrong
Rapid trigger and setting your actuation levels to those lower amounts means less travel doesn’t matter
Switches do not impact latency
is it better to buy stock 80he ? or separate?
For most people, preassembled is the best choice
R u gonna mod everything then get module if not get keyboard
It doesn’t matter for latency if you use 1mm or 4mm actuation. If the keyboard latency is 1ms switch distance isn’t gonna change that at all
Will there be a tutorial on how to assemble the Module?
Certainly
Building the keyboard is fun 🙂
i prob not going to mod as it takes time
IL just dm you the preferred mods in the esports scene and you can decide which ones to do
same i want to build one myself
Can I have those Mods though?
But most people don't buy a keyboard to have fun, that's a hobbiest thing. Most people want a keyboard that works out of the box 😛
Yes
The esports scene? They literally use mostly unmodded or just lighter springs for most of them
And also, I’m 14 and I don’t what to break my keyboard trying to Mod it.
Tenz is one of the few who bothered to do the other mods for fun
Everyone else mostly just uses unmodded wootings in the scene
how come the prebuilt options doesnt give u the options for other switches?
Every different preassembled configuration needs to be stocked individually, operationally challenging.
cause that exponentially increases the amount of different versions that need to be stocked
same reason why ISO layout doesnt come with keycaps assembled out of the box
There are currently 12 different preassmbled versions. If we offered them in L60 and L45 options, that'd be 24 different versions.
now add iso language options
nightmare
for zinc alloy why thats the only one with a travel case included
cause more expensive = bonus item
Because it's a more premium product, whereas the plastic versions are the best possible price
i'm kind of tempted to pick up an extra zinc alloy case incase i want to swap cases
but at the same time i dont think i will, i like transparent plastic electronics too much
in term of the keyboard is the only difference in prebuilt and individual is switches and key cap?
like if u wanted a better keybaord
"better" is not the right word
difference is that it lets you build it yourself if ur into that thing
and a few more options
If you want the frost pcr case for example you need to order the module
so for the switches like L45 and gateron jade switch that isnt in the prebuild. are those any better when it comes to gaming or typing but mostly gaming
you can easily swap those on preassembled as well
No difference in performance, speed, or latency.
They do feel different to press and they sound different
that is no reason to get one over the other
For l45 vs l60 it’s just preference, some people like lighter switches others like heavier switches
lighter = less fatigue
heavier = faster rebound quicker for spam
ahh okok make more sense
That’s why Apple iPhone makes so much more money than Android phones. Less options = more profit
kind of a vague statement
Any information on the weight difference between the plastic and zinc cases? Obviously the zinc will be heavier. Just wondering if any numbers were given.
It's right on the 80HE product page 
Through the magic of scrolling!
@buoyant solstice wow im blind.
scrollwheel not included on the new superlight mice
pretty big difference in weight
metal be heavy
#🐸│memes
yeah my 65% keyboard is almost 2kg
heavier better? 🌚
? Fr how do you use a mouse without a scroll wheel
Mice don't need to be that light
Heavier is not better, it's just heavier
Lighter is objectively better for aiming but weight is mostly preference
so it just for looks preferemce
yep
And feel



