#tech-support
1 messages · Page 188 of 1
Will work don worry
or you can go onto github and just activate it for free
Like the smart people do
microsoft is aware and doesn't have an issue with it
nah I'll give them 20€ and good is
it's just a key
no ?

lmao
ima run that
ok
Good luck
glgl
Hi! I made a reed rye plot and watered it and stuff two days ago and it’s said 11 hours.
After 11 hours I log back in but it says 7 hours until it’s done (that was last night for me). Now it’s morning and the seven hours should have past but now it says five hours left.
Is this a bug?
please report #contact-us then
alright now driver stuff
should've been resolved
you can report that in #1481345124939075756, @candid trout
that because 596 is NOT WHQL
Coz 596 is a beta driver, it's not gonna be available in the Nvidia app
ye
Up to you
depends on you
596.02
aight ddu time then
it fixes a few issues in the previous drivers
you can go back to 566.36 if you want.... before all the bs
make sure to read https://discord.com/channels/950244160684834837/1481346248840581210 as well @candid trout
before all the bs with the least bs*
i am on 581 atm lol
windows 10?
nah it's for Adrenalin
just stay for now
it's totally confirmed to be buggy rn huh
i haven't encountered any issues with 26.3.1 but others have issues
I see
also it a new month... most likely we gonna get 26.4.1
then we see how broken it is
you're on windows 11?
I bet it's gonna be 26.3.2
but hopefully this time it won't be broken
LTSC
ye i need yalls reminders again, how do i boot into safe mode, through bios right?
search msconfig in your start menu or hold shift while restarting the computer 👍
26 is the year, 3 is the month, 2 is the version on April.... hmm, guess so
oh is that how they number their versions? I didn't know mb lmao
Um it gave me an pop up saying "install additional drivers?"
And i am in recovery mode rn
I don’t have the id and information about the device that’s very detailed 
uh there should be some numbers you can press
Uh there i had option to restart
yes.... i thought you say it as an april fools /j
@short ridge it should show something like this when you select Troubleshoot and go to Advanced Options
safe mode is fine
just go safe mode
i'd recommend installing 596.02 if you DDU
Well i got both right here
I am just choosing whether to clean and restart or clean and not restart
Lol
aight
clear shader cachce
clean and don't restart
install 596.02
make sure you're disconnected from the wifi
Doesnt even have a wi fi option here
it's on safe mode without networking
ofc it won't have it
Ye ik
Wym
See I'm a gullible person
and sometimes I can't properly sense if someone is kidding around or not

Istg if this thing crashes mid install again
Ssd got replaced, windows was reinstalled clean
I hope not
Should i choose express installation or custom
custom and clean install
Up to you but I recommend custom so you know if you want to install some things you need or don't need
make sure to do a factory reset if there's an option there as well like in AMD
Clean install does that, restores the dafault settings and shit
if it srsly crashed again... might as well delete System32
Yea i couldnt install the 594 version before, it was crashing mid install
But my windows was cursed that time
replaced system32 with system33 on my computer and it runs games like a beast
I assume renaming the system32 also breaks the whole pc right
Out of the office 
yeah just boot back to regular Windows
Max is FREE... FREEDOM
@proven sundial someone is calling for Freedom
Recovered a bunch of old drives out of a failing server 
noice
so wait...you restructured the file system?
Shoved them into an old Synology we now use as an off-site backup target for extremely critical shit 
oh it's a NAS
Nah that shit's gone
Managed to pull the data off the server before it fully died
So that's fine
ah
that's good news
backed up before it failed
HPE Gen6 
Drives have a manufacturing date of 03-2013
i don't like hearing that name

wow, as old as my CPU
oh lemme see what brand ssd they replaced mine with

Lexar
Good shit
so it's a Crucial SSD?
good shit
if that is so
ya might wanna check using CrystalDiskInfo to be sure
but if it's a Micron chip then that's good
is it that bad?
nah just i have trauma from my previous job
oh it's not Crucial, just micron itself huh okay
Hey it survived for 13+ years
as long as it serves that is all we need
Shit's pre-x86_64v3
it's alright honestly
yup it's still good
1200 power on hours huh
That specific SSD is about €90 at my local retailer
it's that cheap?
... And it's a refurbished/repurposed drive
and it's already at 95%
how can you see that from that window
hey at least they still did replace it properly
Lmfao it already has almost 14x write counts
well it already has usage so most likely it's a secondhand part
The power on hours and power on count?
First things that stand out
Besides the 95% status
that tells me its a second hand ssd but repurposed drive?
It has about 2 months of constant use and was pretty hammered with writes/reads
Repurposed as they probably pulled it out of some other defective unit
ah
Instead of throwing the whole thing out
repair shops do that all the time I guess
I mean especially with current prices
well as long as it works without defects ion mind that much
fair point
Take what you can get
true that
But the 69k power-on hours on this drive 
You can rename it whatever you want
you can rename it
... You did not know you can rename partitions?
i call my C: drive "Losedow"
I call mine useless sata drive

Then my hdd are wdb 1ext
Wdb 2ext
And the 20 tb nvme is BFGS 1
No

If you want to suffer, Yes, else No
But hey 25h2 finally adds in clicking on the clock on non-main monitors to see the calendar and notifications
nothing much if you want to use it as it is... only thing you want to do is to debloat it & disable telemetry
Time for O and O shutup
if you doing that 0w0 shutup
guide me through it unc
i have never done that
There we go just go for recommended
Just use the recommended settings
this right
Mhm
and now restart
Yup easy
Yes
now time to install endfield and see if it still crashes
it normal... will compress down to about 48GB
Why is this happening
ye ye but it was like 50 gigs needed before
now 85
lol
looks like network issue, try changing dns
Also reboot your phone first
Done no change
It's like this since yesterday
you not from Philippines right?

That a loud Silence if you not replying.... i assume you are
@blazing umbra you still there?
Only for decompression
Game sits at about 47 post-install
ookla speed test says i have 450mbps internet speed why is this thing downloading at 30MB/s
shouldnt it be over 50
Yes
Nope from India
Wifi or Data?
Wifi
Tried vpn other than dns ?
if that the case, it a first

Idk this prob was happening with wuwa a few days before and this time with enfield
Yeah most likely imposing restrictions
wanna bet if this thing works first try
i had to manually extract files before
I'm sure it will work now if they tested thoroughly
Normally repair centers furmark the shit out of laptops and pcs
it started veryfing instantly
goodnite & take care Xomori 
pray you dont wake up feeling like you just bathed in sweat
Thank you i need to restore humanity
you mean freedom to humanity right?
okay now this time, stop messing with your system
Where do i report for bugs?

time to still test if it freezes on vulkan still
Alright thanks
Quick question, what type of bugs are these?
if it hinders you from controlling the game it's a game breaking bug
but if you can still control your character and you can correct it, I 'd say it's a visual glitch in general
I cant play the mini event, since it only uses like 1/4 of my screen
Cant see anything
ah then it's a game breaking bug
gotta report that
first time I've seen that bug here
though ask the others if it's reoccurring with the others
Alright thanks
Shaders are being compiled
This process is as laggy as usual

welp i am ingame
lets seee
please dont freeze
time to test this things full capabilities
@proven sundial @golden zenith I can enter the game after I use vpn to load and then turn it off and the enter the world it works but I am not sure why this happens
@rancid loom man
this thing still freezes on vulkan
like come on
ig directx11 it is
why are you turning on Vsync?
Oh i didnt notice that
but anyway
i dont think thats whats causing the issue i am dealing with
noice
has anyone seen my son
yall got any fix for wuling city crashed my game other map work fine excluded for wuling city it used to be work fine b4 1.1 update
how is device load even calculated
tried repairing game data?
any setting i change except very low or low it goes to orange/red instantly
i get 100fps when its fully red
alr did but still crashing
forced to login on my phone to hop off wuling city
nah istg
it freezes on vulkan
crashes on dx11
what the fuck
the game jus targets my specific hardware and just crashes
just great
linux time? 
is 596 the next driver update that will no longer necessitate reverting to old drivers?
it depends
god my i key was disabled for some reason
great news
if you encounter other issues aside from Endfield then we recommend going back to at least 591.xx
since the 595 drivers are shite
i got a new gpu recently and yeah the stuttering ingame is atrocious
test it out and verify
but just download the 596.02
@sterile basin
wrong ping sorry
Beef gang
sorry mb

stuttering is all gone on my end
in this update , i tried every setting , from highest performace to DLSS quality, rtx5070ti, but my fps aint stable, keep bouncing around 70avg, gameplay isnt smooth, is this a update thing or what, i updated nvidia drivers, on previous drivers and current drivers , same result
596.02 from nvidia announcement (gotta be manually installed, won't show up in nvidia app)
scroll up a bit
ty , gotta try
i was just browsing steam
and saw it hahahah
i blinked not once not twice but three whole times

hey be happy it doesn't hit your ass
Bruh
I'm happy that my PC is completely unplugged
One ceiling fan and light got burned
so some lights and an appliance went boom inside when lightning hit?
btw thunder is technically the sound you hear after the flash

the one that struck the transformer was lightning
but yeah I know that doesn't help the situation
just saying
i feel like im making a new cpu architecture
i thought we were glassing earth like the convenant my bad
Bro I could see the fire and smoke
make sure to unplug the other stuff that doesn't have any surge protector
Intel and amd wants to know your location
or better, just unplug all appliances
Nah no more problem
Cuz no power
Running router with backup ips

i read seed picking unit as seed fucking unit 
And a fuse went down so gotta replace it in morning
I know but just in case power comes back up, it's a good practice to unplug appliances that hog your electricity
well technically you could interpret it that way...coz it produces seeds

Bro the transformer is dead ain't getting replaced till morning

okay but just saying
then replace those fuses ASAP
I know
Rest are durable ones like industrial ones
still replace them.. fuses are cheap anyways
I bought 6 of them and 2 were used on village house
So replaced the 4 ones on the apartment am renting

and how about the others
Total 5 fuses bro
u said some appliances had their fuses blown

Fan coil died I smelled it
so motor blown
Light went boom
yikes
guess you need to replace those first before the fuses then
there's nothing lasting a lightning strike
Gonna do it later
not even an industrial grade circuit breaker
Nah only if hit directly
If not industrial grade one works fine
yeah but the transformer deliverin the voltage onto your house got struck
Also how tf people fall for these
thereby sending unwanted amounts of voltage directly to your breakers

might wanna check those as well honestly
true
Didn't smell them tho
but a quick inspection of it won't hurt
Am lazy rn 
I'll just replace them since I have spare breakers
I see
welp just check those things to make sure before you turn on your electricity once the transformer has been repaired
I already feeling tired of the work I have to do in morning
better safe than having another power surge
ips or you mean ups?
Ips for home
ah
so there's power in your home still
do you have a generator at home by any chance?
No
better than nothing
Ye it's older then a lot of people
17 years old

Welp I go sleep
@proven sundial currently praying that only endfield is cursed and other stuff will work
i am still getting the same screen freezes
Let's see i suppose
my game doesn't open notices or events that uses external windows, anybody know why?
let us know if your performance issues have been resolved 👍
what was your previous GPU?
disable it in-game
enable it driver level
me who never understood what vsync is
must be the webview
repair the game first
in-game vsync will destroy your FPS by limiting it to fractions of your monitors refresh rate, external vsync is generally dynamic and will limit your FPS or refresh rate slightly depending on the circumstances
switch your DNS if you're still encountering this issue
it's a massive difference
I checked file integrity, is repair ingame?
i mean, if it runs it on a fraction of the fps when on high end and a low end device cant reach it anyway? is what i never understood
in-game vsync is less performant and most implementations function this way
what it means is
file integrity does the same thing
yeah nothing changed
if you have a 60hz monitor and vsync is enabled in-game
it would be interesting to trying switching to dx11 and then back to vulkan
but i suppose that will not help
if you drop to 59 FPS for a short moment, in-game vsync will lock your FPS to 30
since it is webview
and if you drop below that it gets locked to 20
for a short moment right?
for a little bit, yeah
when is it good on then
nope didn't help
if you have a 120hz monitor and your FPS drops to 119 for a short moment, vsync will lock your FPS to 60
☝️
just enable it driver level
either in your monitor OSD or in whatever graphics driver program you're using
though i have seen this bar below before
so small stutters turn into moderate ones at the very least
where it does not connect to certain things
i thought vsync was meant to synchronize the vertical plane refresh with horizontal plane refresh with a little overhead
it has never had those problems for me
have you tried changing your dns?
in fact for me, on a 120hz monitor, vsync helps
it doesn't connect to notices and events that use webview, it tries to load but it stucks at loading then closes the webview attempt
dont question, just test it out yourself if you're curious
I didn't touch my dns I changed game's location from hdd to ssd recently but I can try to flush dns if that'll work, if not I can change completely
the most simple explanation is that it's just meant to synchronize the FPS with your monitors refresh rate
so you don't get this
ah
reinstall the entire game if it still isn't working after verifying 10 times
screen tiles thingy
yes, im aware it fixes that aswell
i see
different implementations function slightly differently, but the primary goal is just to eliminate this
but i thought the implenentation was to make the vertical plane refresh at the same rate as the horizontal plane, thus eliminating those issues
nope
and sync it to your monitor fps aswell
curious how it works then
ill have to do research
ohh i see, so it forces the gpu to wait for the frame
has nothing to do with screen planes, huh
Nah, its still the same, stuttering, i updated to the new driver u guys recommended, its a game issue i think, just like the ram issue last time, gonna take more updates to fix these things
switch to dx11 and back to vulkan
it isn't a game issue
his gpu is at 85 degrees celsius, is it thermal throttling?
yes it is lol
if its an older gpu i would imagine
was gonna search up how to enable sync on my laptop
what GPU are you using?
rtx5070ti
really bad thermals
wtf? and its at 85c?
I have contacted isp let's wait for now
someone either screwed up your thermal paste job at the factory or its dried out somehow
thanks for the explanation may your pulls be blessed and losses be missed
I tried to flush and change but no help
its environmental issue, i live in a hot place
your living room cant be close to 85c though
or wherever you game
why is it that my game starts lagging after like 5 minutes? the fps drop is reallly noticeable. i feel like a s8 gen3 chip is good enough for arknights, and i cant even reach 45 fps consistently
sure the heat can have an impact
Vertical Synchronization is a general method and term that's used to eliminate screen tearing that occurs when your computer sends a new frame to the monitor before it's finished drawing the next frame, which results in a split image of the next and previous frame at the same time. This is achieved by locking the FPS to the monitors refresh rate and forcing the computer to wait until the monitor has finished drawing the last frame.
Unfortunately this increases latency, and standard VSync implementations will lock your FPS to fractions of your monitors refresh rate to keep everything synchronized if you drop below a certain threshold, which often causes perceived stuttering.
but that much?
had to dig this up
mobile heating issues maybe
bro, its a laptop, g16 strix , got 3 fans, but still, it is what it is
im using a tablet
wuwa, zzz, genshin all works fine 🤔
ohhhh its a laptop
that makes alot more sense 😅
you'll want to look into power limiting and laptop cooling pads
oh dear lol
also wuwa heats more then ef yet its better ✌️ am i doomed
your stuttering issues are because the GPU is practically sitting inside an oven
most gpus have thermal throttling oob
which basically slows the clock speeds and power intake to prevent damage
but this lowers fps
if you can find a good baseline undervolt for a steady fps, you should be good
ROG did some shit to their laptops, ie locking their power/wattage/and frequency , i tried everything but nothing was effective, even CPU was running at 5.2GHz when its not being used that much and at a temp of 95+C, so i finally got it to disable power performance and now its much better
genshin and wuwa runs much better and use less GPU too
yea
for me thats true too
it's most likely bypassable anyways to change the power limits or apply a slight undervolt
you can also configure windows settings
endfield has insane graphics tho, even for low
like water physics on clothes? wowee
gotta use a lot of gpu regardless of optimization lol
personally i wish they went lighter on graphics
developers used a lot of tricks to optimize the game and have certain visuals look nice
Asus bypass windows settings, putting their version on top of windows, its some deep BIOS related stuff so i didnt touch it, better be safe then mess it up
yeah, they did a lot of optimizations
wuwa's dev team tried to optimize a heavily unused game engine
risky biz
"oh it'll run like unity surely"
lol u say that with a.. you know.. certain character pfp
oh lordy
lazy ai drones
PFFFT
well yeah too much ai use in developement
it's not used the right way
critical components of threading and gpu draw calls are overlooked

ai works best when its supposed to assist humans in their work, not humans assisting ai in its work
your laptop model can't actually do very much as it has undervolting locked in the BIOS, and can only be configured for a slight UV if you unlock it
you can use third party tools to set power limits which will help just as much though
i'd do both
or you can download a trojan virus to hack into your own system's firmware
but dont do that
first thing i did was use 3rd party tools, even microsofts, guess what, this cpu isnt supported , ultra 9 275hx
microsofts?
maybe power management from windows?
you should be using throttlestop or g-helper
i mean that counts ig lol
it's compatible
idk, and idc, same sh** to me
fair enough
show me what it prompts you with
tell me some other softwares to try
@regal mountain
well the one thing g helper did was turn own my rgb under the laptop and back of the screen
reducing the temp limit really did reduce the gpu temp, i ll play with it later then
which version of throttlestop did you download?
stable one
oh, lemme try
you also need to disable the BIOS protections, otherwise stuff isn't going to work
it really did started, thanks, temp is at 74 now, ill try the rest tomorrow, thanks again💝
my game doesn't open notices or events that uses webview, I tried to delete and re-download but that didn't help. Anybody know why?
fully uninstall the game
I did
Fully Reinstall
- Fully uninstall the gryphlink launcher and downloaded games from your windows settings, paste
%appdata%into the top leftmost search bar and delete the gryphline folder, afterwards do the same in%localappdata%low.
did you do this
I wiped clean all the files I could find about endfield but I can retry
Hi everyone. Cant enter the game: it's downloaded and after clicking to enter, it throw me back to title screen with error, which i cant see, like on screenshot.
Verified files, but dont uninstalled game.
where i can see logs to give more information about?
Are you on linux?
Nope, windows
network issue, time for a VPN
it's an issue with how cloudflare is routed/blocked by some internet providers
and some asian countries really don't like it lately as well...
average xfinity experience
assuming Russia, since you've got RU in your server language list, do correct me if that's wrong
Sure
Its correct
But i've encountered same trouble before, and idk what has broken now.
cloudflare uses anycast to route users to the closest edge servers of their network
some of those servers are getting blocked by your ISP, even though they're supposed to be constantly changing to limit this kind of stuff from happening
for some it gets fixed by switching DNS settings to some other servers (Google, Quad9, etc), for others a VPN is the only solution
okay all other games on my system are fine
only endfield is biased against my system
awesome
-# is it linux time yet? 
i am afraid linux wont solve this particular problem
the game just nitpicks my specific hardware and shuts itself off

bet lol
it worked great for Nankashi
or my hardware isnt just powerfull enough to handle endfield, which is just insane to say the game runs on ancient hardware
its just my specific laptop having this problem
whats even better is that no one else has this problem
its just me

it sometimes happen to me when its active times
1 AM for me
but not when its inactive times if that makes sense
gn pro
its 2:17 am here
i am currently downloading where winds meet
I did that too but nothing different
I'm following the steps for installing AK:EF on the Steam Deck; do I go back to gaming mode to do the install? Or stay in Desktop mode?
old one was a 3070 laptop
current one is a 5070
oof discord endfield quest not working
mine worked earlier tho
linux
might have to wait for the Linux gods for that
Hey how can find which account that I uses last on the game
google accounts and email accounts aren't the same
try logging in using the google account method if the email account method isn't working for you
It'll only work if you install Discord in a DistroBox, the Flatpak one (default from store) is missing the permissions to see running processes on your system
Sadly that's just how flatpak works
Banned
how do i
me when it was christmas

or if can i
You gotta learn a bit of the terminal
Grab DistroShelf from the store
executing and downloading
When it's done, click the update button for it
do i wait still
its just stuck
nvm im actually dumb
its done
do i do install package
Dude
Install from within' the distrobox
Go into a terminal, in your Downloads, run sudo aptitude install discord.deb
If you ain't got aptitude, install it with sudo apt update && sudo apt install aptitude
sommand not found
i am dumb
on konsole
you got ~ there
Ferdora iirc
oh Fedora
ye
fk no
shit expensive + limiting
should have bought it yesterday 
How'd you fuck up the package name
Remove the ~
is && mean AND? and & mean run on bg?
me when it not working & i have to double check spelling mistake
howd i even get the ~
it's like tfw you get a syntax error in a program you did but you only can check on it manually


more like PEBCAK error, double check on user
how do i delete the ~
bruh... up arrow to get the code back & backspace
&& means "after you finish executing the first shit, if it didn't error out, execute the next too"
unless that doesnt work on that distro
ok
If you put only one & then the first command gets sent to background and the second gets executed immediately
JENSEN WHAT THE HECK DID YOU SAY?
so it error check as well.... good to know
Think of && more like "if command 1 ok, exec command 2"
It won't exec command 2 if command 1 exits with non-zero
Also you can make some disgusting chains with bash logic and stdin pipes
for address in secvpn ws webmail legacy; do echo -n "$address - "; curl -s "https://dns.google/resolve?name=$address.company.tld" -x http://proxy.company.internal:3128 | jq -r '.Answer[] | .data' ; done
Yes, that is one single line 
the spell dmg is real
how do i get to the downloads on distro
Just cd ~/Downloads
Care to guess why that curl+jq bullshit is required @rancid loom ?
nvm i got it i think
uh
so if in case there is a package or application you want to run which cannot be found automatically, you can point the konsole to the directory you wish for it to search on
Just click Discord here
oh wait I read that wrongly. I think it's required so that konsole knows that the directory should be pointing to the current user of the machine
... Dude what
isnt that just puking
nothing seems to happen
switch back to Linux
Kill your Discord
Run discord in the box terminal
Got some errors?
it wasnt running
not now
so I researched it...seems my inference was correct but I explained it incorrectly
but the idea I had in my mind was correct
well partially
Dude
For this one
Where the fuck do you see ~ in that command lol
bruh, where... i dont see it
Just cd ~/Downloads
for this one
Akira LLM AI confirmed? 
curl is to transfer data from or to the server... he running silently
jq is something to do with JSON
question is how to interpret this command
oh I thought you were referring to that one you mentioned earlier
well, he did ran Copilot with his search before

I don't have Copilot anymore
also I got question wrong again
anyways I dunno man
my brain is not braining
BEANED!
-s is for silencing the curl informational output, only leaving the actual response from call
-x to use a specified proxy
This is ran in an airgap that has internet access only through an http proxy, along with the internal DNS provider
jq is to interpret the query response from calling Google DoH, outputting only the IP
Wrapped in a bash for so it's executed for multiple company subdomains, to check external IPs
Loop through subdomains
For each, execute bullshit to display
"subdomain name - ip address"
JQ is just a json processor
I see
You get the output from curl, as DoH response is returned as JSON
Look for the Answer field to get IP response
does it also store it on a file?
how
like a database one or text file or some sort?
uh probably kill your discord on system monitor and then open terminal to run discord on the terminal?
No, it's just to query external DNS (Google) from an airgap environment
i dont even have discord installed
that's how I interpreted what Max was saying
oh mb thought you already installed it
Didn't you just say your discord activity didn't recognize the game? 
i uninstalled it
... Why


im still processing this btw
i thought this was another discord
https://dns.google/resolve?name=$address.company.tld
so this the DNS address and
http://proxy.company.internal:3128
this is the proxy server address amirite @toxic atlas ?
@serene cairn
hey ntsync is working 160 fps in wuling
it's sharpfield now
i oversharpened

but hey atleast i can see hahahah
still not working
Hey idk what channel to put this in, but i cant complete these battle pass missions even though i've completed almost every quest in the game. is this a bug or am i missing something?
latest wuling quests ✅
Both quest are in Qingbo Stockade
you can find the seekers of the lost treasure quest at the start of qingbo stockade, after you finish parts of the main story quest in that area
i believe the second one is located at the upper teleport beacon
should be correct
it should also be highlighted on the map
np, have a good day
yeah
🙏 appreciate you
@ashen salmon, @mellow mantle
Yeah?
could you provide some additional details for this report if possible please?
has refreshing the event screen temporarily resolved the issue for you?
U mean by going in and out of the event page? If so, then no, doing that didnt fix the issue
distroshelf terminal?
I juat reopened the game, was it supposed to look like this?
indeed
Alright thanks
what command
not command, just asking what that box is from
yes

doredore
Nankashi trying to setup distroshelf & Max was Helping
Ive got a problem, endfield just doesnt start. 3 days ago everything was good, but then after clicking 'start' button after 5 sec of processing this button just again showing 'start'
I tryed to uninstal game and launcher, nothing helped
@dapper saffron using flatpak to install discord by chance?
ever done this?
sudo dnf install alsa-lib alsa-plugins-pulseaudio alsa-utils
uh why does week 4 mission is do 4 arsenal pulls. i don't want to waste pulls on weapons i don't need
this is not a technical question
yeah my bad still didn't realize wich sub i was on since yesterday got lagging issue
though you can always leave feedback on #contact-us
why containers, lol you're serious letting a newbie composing a docker container for "security"?
- Click here to navigate to [[Reliability Monitor Troubleshooting]](#tech-support message)
- Click here to navigate to [[Windows System Corruption Fixes]](#tech-support message)
functionality tutorial too will probably resolve the issue
something to do with discord quest not working properly
sry might be a bit biased sry
that
where do i do this
well, im not well verse in linux, so im not sure
open terminal and paste this in
tbh, fedora is hard when it comes to out-of-the-box exprience
alsa command
sudo apt install libasound2t64
apt?? wait
in the distrobox?
He's got Ubuntu 24.04 in there
Official discord package runs with Deb
looks like there isn't one
@woven jay ✅
Repair Dependencies
- Repair and install all Microsoft Visual C++ Redistributables: https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170
Fix Permissions
- Launch the game as an administrator by pasting
%ProgramFiles%/GRYPHLINK/games/EndField Gameinto the leftmost search bar in your file explorer, navigate toEndfield.exeand right-click it to open It's Properties, switch to the Compatibility tab and check "Run this program as an administrator", afterwards run the game directly fromEndfield.exe. -
- Check "Run This Program In Compatibility Mode For Windows 8" if it Isn't working.
He's on Bazzite
Distrobox with Ubuntu for Discord
what might have i missed
ah
?
forgive my dumb ass

wyd this holy week
so @dapper saffron what do you want to do if I may ask?
i thought she already got it
im tryna get discord to detect the games im running






