#🔫・vr-gunstock-chat
1 messages · Page 110 of 1
im gonna grub you in fallen but yeah the magni stock is pretty good
I got banned 🙃
how does one get banned in fallen#
Because they take time to Design and Materials... They have shipping and packing costs... They have seller platform fees... And it comes down to what is someone's time worth to make and sell their creation.
You can easily build something DIY for around $20 or so if you want.
Cheating
fair enough
Someone get me a free gunstock🙏
i need a new gun stock i can make them easly
diy gunstock goes crazy
Free to play method ahh, we got gunstock at home. Mom can’t whoop me anymore ahhh build
We making it out of the hood with this one
@jolly adder We have gunstocks at home
still better than paying 70 dollar piece of plastic with magnets
huh
i calibrated my gunstock but when i use a side grip it changes the angle to the right
is there a fix for this
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
you could 3d print slots for your controllers and tape those on instead of the controllers themself
I hang mine using one of those 🤣
Will there be a way to calibrate certain guns and not just types?
yes. dont use the side angle grip, use the shift. they have pretty much the same stats and it only shifts your gun up by making the grip point lower
maybe with the gunstock update but no one really knows
when would that be?
Genuine question, does it work?
Also, people with gunstocks, how much better is it to have one than without one
it works pretty good
Worth buying would you say or is it too much for small benefits
you only really need 2 hangers so i think its worth it
Oh shit I ain’t paying attention to which message you replied too
no one knows either
Anyone have a good gunstock recommended within about $30-40 range?
dont bother at that price range imo, save up for a better one
Which one are you looking to get?
it helps with hand stability (which i have issues with), so mine helped me a lot, however those with already steady hands will see less improvement over time
!gunstocks I currently use protube's magtube, which is the best option in my opinion, however most of these on the list below aren't terrible either. I do not recommend fully 3-d printed stocks unless you know the print grade is good
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I just purchased the magni stock off of Amazon and every time I ads with my face on the buttstock my gun is far up and to the left any fixes?
Is it possible to use a gunstock with an angled grip?
Smartstock
You can use discount code SKOLVR5 for 5% off
i can make you one if you want it will be like 10 bucks including shipping
its not super good tho
hey skol, thanks for reaching out, best customer service ever haha, just wondering when u say slightly to the left, do u mean like slightly to the left of the like meta logo on the ring (referring to the quest 2 version of the tomahawk). I just need a bit more in depth guide sorry!
Here is the example of how I calibrated the grip. I've sent you the link to that tutorial from my discord server and video in messages.
Here is how calibration of the front grip attachments is made:
-
Reset all the settings to default to ensure they are at zero. Weapon settings need to be reset individually as well.
-
I activate the physical gunstock — everything works fine without the additional grip.
With the grip attached, the weapon shifts to the side. -
To counter this, you need to raise the weapon with the left-hand controller so that the grip attachment point aligns roughly with where your hand is.
-
Now the weapon is leveled with the grip, but it shifts to the right. To compensate for this, you need to rotate the magnet on the Tomahawk/Butcher to the angle shown in the image.
-
Then, you can fine-tune the height by lowering the magnet.
The aiming becomes almost perfect.
With the SMARTstock you can't finetune, and it's not so perfect, but it's still acceptable and playable.
Getting a pro tube, good choice?
Yeah, refer to ragesaq or scopeog content for setup guides
Thank you so much
no problem
Oh ok
I just noticed
😂
Yes its my birthday comin up and i was thinking about buying one as a self gift
That's how I got mine back in early 2018, is a good idea for sure
Yea, been looking at different brands for a little bit but seeing luckoftheirish uses you guys I think it was the best option
If you've not ordered yet did you see the sale? 20% off magtube currently
It also applies to the signature series editions (there's a luckoftheirish edition for example)
What would yall recommend need suggestions
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
When does the deal last until
a week
Ok thank you
each product on sale has a timer countdown, so you can easily check how long it will last for as well
Ima get one tmrw
I bought the cgrip with the extended stock. 53.49$ I gotta wait till the 15th-21th 😭
That was my b-day money too so I hope it was worth it
Not worth the tracking sucks
Why tf is it on da list 😭
!gunstock
Mb didn't mean to say dat
Also y u say dis
I meant to check it I didn't see it was on there
It varies from person to person, personally the cgrip is my favorite stock, most sights line up without even needing any adjustments, minus shotguns, sks, bar, and the bolt action rifles other than the AWM
I looked through the reviews. Main complaint I saw was that it was too short. So I got the extended version
That’s the one I use, the shorter version doesn’t really preform well with the game
Seller called one dude a midget cuz he complained lol
Got me excited now
I’m lord lol didn’t know that
Yeah, it’s a decent stock, with the open face grip mounts, it is one of the more affordable stocks for the game that don’t require too much set up
Nicee
Plus I just don’t like magnetics, sometimes they can be difficult to use with all that adrenaline goin through ya lol
Oh definitely lol
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I spent and got magtube only waited 4days
Each to there own
any1 know cheap gunstock
temu got plenty of em
temu will break
that's why it's cheap
Build one out of pvc
LOL
How cheap?
like under 100 euros
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
guys why is it when i calebrait my gunstock and i aim my gun is wierd
it does not work for me
Ngl I built a gun stock
If you have a angle grip then it will face at an angle
@latent tide that's the most real gun stock I've ever seen😂
What's that apostle to mean
It works really well
Ik it looks like some shi I would do@latent tide
Should I get a magtube
I would get the tomahawk but yeah both of them are great
Maybe this? https://youtu.be/tsWABgYGxX4?si=ecF-lS_KTSdIaG3w
Hey,I was just wondering.I am thinking of getting a VR gunstock.Dose anyone have any recomdations of which ones to get.No real price limit.
anyone have any good 3d printed gun stock stl files that has the capability to have magnets for looting?
What is a good gun stock sixty five dollar budget
W
Is there any more options for gunstock calibration that I'm missing? It feels like no matter what I tweak with in the settings, it just doesn't feel right to play tabor with a gunstock. Maybe it's my gunstock?
it could be your gunstock or how you have it configured. if it doesnt feel right its wrong and you need to adjust it
I'm not sure, the controllers do seem a bit strange, which is probably why I like the way Tactical Assault VR handles their gunstock calibration
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Anyone wanna play
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I can't tell if gunstocks are worth it
it improves accuracy a lot but it's basically impossible to do anything one handed
unless you have a sling but that's still really clunky
Dude. Look at the vid right above your post
wtf did I just watch
I built my own it's magnetic
it's hard to climb ladders, use sidearms, or loot
I got a sling for it but dropping the stock every time you need to loot is annoying
Depends how well you have mastered the drop. Off course a slings (1 or 2 point) Will always make a stock dangling on the neck. Holstered stock is always i one position.
I can only tell you that its really not. Its more cool than anything else. I holster to throw grenades. And for every thing else. Its not GoT but it shows the concept. Beside pavlov is faster https://youtu.be/u-NlaM_AYuk?si=I-08Sjz7Ez8CsS9X
I keep breaking mine so I had to reprint a mount
gonna retest tomorrow with the stupider fenix
I reinforced minę with m3 steel threaded rods... Every where
Printed plastic was never enough
I can't put a steel rod through a controller mount
the barrel is made of iron because it needs to be magnetic
the only thing that breaks are the controller mounts and the best I could do was find stronger files (which I did, but they still break under a pressure)
Ive been there. I made a "vice" x2
Or a pipe clamps. I painted the inside of a cup with the rubber paint. Its not only Just stabile. Its fused together
BTW who said you cant do the steel rod through the cups? I did two. For perfect stability
Not only its possible, but makes great locking system. Sure its not an easy build, but i am building. Users are Just enioying the fruits
we have two different types of mounts
mine are a ring around the controller
Top mounted?
yea
You were ready for oclusion?
I thought about the top mounted. They have more realistic feel to it. But oclusion is too much of a pain. And its more intuitive to put stuff down than hang stuff up, while blinded. And my magnets are of 60kg magbetic lift. No way youll miss them 🙂
BTW im not saying that top mounted are worst. I Just followed the Old rule. "avoid oclusion"
Oh. You are the og maker?
Tbh sanlaki is not.. Very... Good
I haven't found a better free version
It does not allow for any adjustments on the butt. Its going to be a pain for got
This is probably the Best free stock on thingiverse. It has its flaws, but it has a locking system, magbetic crattles, pump action and X and Y adjustable butt
It doesnt allow the controllers xyz setups, but that feature is really high end. I wouldnt give it for free. Too much Time ive spent discarding failed prototypes and getting the right design, to give it away. I actually did share Uni T for a while but this is the hardest gunstock to build ever. It literały takes 8 hours of constant building. And only if you know what you doing. The eccentric levers are supported with an aluminium core with locked m3 self locking nut and wide washers on both sides. It takes patience to make
two aluminium profiles 19,5 x1x1 empty (for butt), another profile 16x1x1 for X axis retraction on a butt, linear rail and the ball bearing guide between the controllers. amazing for pump action. also plenty of M3 rods, and alumium m6x20mm pipes. and steel band for the cups. and pvc for the cheekrest
When I pick up a gun and put it back in my holster the hand stays glitched
Any decently priced vr gunstocks for meta 2
!gunstocks all of these are fairly good options
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Smartstock
You can use discount code SKOLVR5 for 5%
Can anyone tell me why the full auto sks doesn’t work on calibration
try calibrating for bolt action
otherwise dont use it, it isnt a good gun anyways
@vale belfry
As much i am always for a full cups, maybe try the half cup on a front hand. Bowk has a full cuppers but he has them more shallow. The user pointed out quickly that he does not place the co trontroler i the cup. He does a half cup alike move. Full cup for the front hand is too cumbersome. Or make it more shallow like Bowk. Tbh half cup Will make this stock objecticely better.
But only on the front hand. It seems like the dominant cup fits nicely and. With the weight of this stock its totally safe for work. For Old times sake, i advice on painting the inside of the dominant cup with a rubber paint. Plastidip. I did that for Uni mk1. I do it for mk2 also. Obviously makers are too lazy to go the distances i went for securing the controller, but the paint is not that much of a hard and Ti e consuming work. It Will Def inprove the "grab"
should i get the Cgrip vr stock or is there any better stocks for the price range?
@glad scroll i saw the physical button Press lever. Cool stuff 🙂
This makes the front halfcupper impissible... The beauty of magnetic front hand... Maybe fixed dominant and magnetic full cup in front?? The locking lever on a front hand is super useful. All snipers Will love you for that.
quick question the gunstock is solid in the middle of the stock or is it splitible
@thick hatch
quick question with yuor gustock. What's the diffrence between the original verson and the Tabor mod version?
You are referencing the cGrip stock. I don't have a specific Tabor version.
Happy to answer any questions, but I think the Tabor mode shifts the stock a bit
oh mb pinged the wrong maker of the stock. But thank yuo for answering sorry for the inconvenience.
No worries at all
Funny stuff. Rotate the dominant to align for tabor..
What is the cheapest but best use of a gunstock?
The smartstock by skolvr is prob in my opinion best cheaper one. Skolvr has best stocks for me personally. I've tried one stock, protube magtube. The other ones just aren't as quick to use always trying to find the magnets to put controllers back on the stock after I detach. Also skol is the only one for index controllers that make sense. Good stuff
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
testurant
Wrong channel
flint and steel
boy wuiet
Yeah he’s just being annoying at this point
If you see those two yap about anything but gunstocks please ping
They are really asking for mutes at this point
Imagine my surprise
I'm on the go so might not see
I have a gunstock and it is awesome
I have a gunstock and it is awesome
say how’s the weather in gunstockistan I heard it was raining guns and stocks
I have a gunstock a couple months back I rear ended into a honda civic and ran away with no note or contact info and it is awesome
wow that’s a pretty interesting gun stock related anecdote
@proper hull so can we mute him now
don’t be rash
You will be really really surprised about things
don’t put me in the dark boss i'm afraid of the dark
Abandon all gunstock all ye who enter here
my gunstock is black
I don’t have a gun stock
with iron toobs that have been scratched up because of the magnets
☹️
then get outta here boy
I’m interested in purchasing a stun gock
👈
I would not put money into a game sock
I printed my own garter snake but I still had to buy iron tubes and magnets
Mute it is
NOOOOOOOO
Lmao man really thought deleting his messages would help
Was talking about the guy that earned his mute
I have a gunstock and honda Civic. F. Ck you for the accident and for shitty sanlaki. Not only you cheap you also an asshole
It's splittable, but there is a part you can slide under it to keep it attached as one piece
Yes I previously had a half cup in front for faster transition, but some people preferred to have a full cup since it's more stable and less tiring to hold if you don't have controller grip straps. I can put anti slip rubber pads on the half cup to keep the controller completely steady, but then it defeats the point of the budget variant, which for me is quick preparation time and most efficient production cost possible.
Though the normal version of the stock has 3 different types of cups for each hand with anti slip rubber pads, so the user can choose a half cup in front there. And it's still relatively low priced.
Maybe I'll add back the half cup as an option for the budget variant, but I try to avoid putting the customer in a dilemma between 2 options. So I thought get the normal version for half cup in front, and keep the budget version more simple. But I have to think a bit more about it..
Does the Tabor Raidr Buttstock attach to the Tabor Raidr Base set? or are they both separate things?
Tf u want
Can anyone who knows about gun sticks recommend one for under 50 euro
think therye the same not to sure tho
i think you will have to double check if u havent found out yet
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
anyone notice using a gunstock makes recoil harder to control
I mainly use semi but it makes sense
it's harder to counteract recoil by moving your controllers down when your controllers are bound by a giant rod
with some guns it feels almost impossible. free handing it feels like i can spray a whole mag and be good but w a gunstock i need to tap fire
then tap fire
it is more difficult until you learn how to adapt. using guns with lower recoil like the ak-109 and spear in 2-3 round bursts are both good options
I dont play Got, So i dont really know, So i ask. Do you think, this feature would be useful i GoT?
What’s the best cheap gunstock for meta quest 3
Honestly for GOT that seems a little complicated. It looks like it would take a lot of practice to get those motions down to be able to put in it holster the proper way quickly too.
Something simpler like the cgrip or the istock would seem easier to use for GOT
I use it in pavlov. Pavlov is much faster. Yeah it takes some time but free hands for utilities is unmached. I dont like fixed stocks. Its more incovinient than its worth. Heres how i use it. https://youtu.be/u-NlaM_AYuk?si=FyYZ1q4HQrJRV1QH also alignment issues are real.
Cgrip is a half cuppers. You have to sqeeze the stock at all times. Its the worst. Not a single reload nor nade is smooth. Istock.. Thats a joke
Where did you even get this grip and how much did it cost?
I made it. 119eur. This is not Just a grip. It automatically opens and closes when engaging. It is both fixed and magnetic gunstock
Interesting
I was tired of magnetics detaching and fixed being always in hand. Both worlds have advantages. I fused them
He didnt get the holster in this vid. That is really a first o pression video
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
“then tap fire” i’ve spent sm money on gunstocks imma use them😂👎
idk man there's a simple solution, you're choosing the problem
brandodrumvr fs
vr gunstocks sm better the pros outweigh cons. my first shot is always a hit i get no sway w snipers
yea gimme a sec
then use a gunstock
i paid 80 for mine but i got the ulti kit
Where the 2nd crontroller go
?
u kinda freehand the other controller but brace it against the stock
it’s so u can still freehand
technically this is the best stock for recoil controls cuz u can pull the controller down and it’s still free
For cheap
80 lwk was expensive but they have it like 40$ base price i think
that’s lwk probably the cheapest one i have
bro lwk i used to think that too but i forced myself to use this one and i like it. u jus have to brace the controller against the mount and it acts like a 2 point system but u can still control recoil like free handing
Does it still;l help with aim and like quik snapping ur gun to someone
Can u add me if I need help with calibration ?
yea it jus takes like a couple hours to adjust and know where ur hands r supposed to sit
So I can tell h
yes that’s cool i lwk jus figured out my calibration this week. i’m always messing with mine tryna find new ones
Also please send me a link
these r my other gunstocks but i prefer brandodrumvr for GOT
bet
Also I’m kinda like new I just got back to tabor from a few wi-es ago
So I’ve gone so bad
But I think if I use gunstock it will help me like and get better at the game
yea it’s rlly good for that quick shot cuz ur sights r already aligned and there’s less gunsway it’s jus a little harder to control recoil in this game it feels like
Ok but there’s to many options what do I buy
well the ulti stock and xl r both the base models but u can upgrade it but tbh the base is all u need
So the classic
i have the full kit but only use like the xl version which just gives u bigger and stronger pieces
yea classic works pretty good. xl better it is has bigger and stronger parts. that full kit gives u other attachments to turn it into a 2point gunstock and have 2 connection points but tbh i only use the forearm brace for this stock. there’s other better be stocks but this is the best forearm brace gunstock
yuhh
So I should buy that
i personally think so but to feel safe watch some yt bout other ppl who use it and see how they like it.
Rh w. Forearm brace ?
there’s a couple youtubers who use this stock also and they made vids about it
wym? like what’s a forearm brace?
Ok but the attachment
Ye u said its good
So I should buy it
I’m right handed tho
I don’t understand the names of forearm braces
me too i’m right handed there’s options to change it at check out
Can u show me how it looks holding a gun like Al alpha in gotwith both hands
How do,e he had another place for 2 crontroller
Watch’s it callled to get like a 2 crontroller o-tips
Like that
this a better vid ik it’s a good one i watched it b4 its a jus a lil old but still works
it depends cuz when u calibrate it it looks different but with most guns as long as u turn on the gunstock setting in GOT they all gunna be the same
Wdym
this might be bad cuz i had to do it 1 handed but this is how it holds for most guns
it doesn’t rlly matter how it looks outside the headset cuz yk u can’t even see it anyways but it lines up in game
Oh ok
w�h�o� �w�a�n�n�a� �r�u�n� �a� �r�a�n�d�o�m kit gen wth us
Ultistock is kinda brilliant
Ultistock is one I use a lot, made some modifications like a pinned stock to remove the screw, magnetic holster, and rolling brace.
Im a leftie. I do Uni T
BTW Bolt action sucks for us :/
Does anyone have a good gunstock for question 3s
Guys what can i do i ordered my stock from olenvr a couple months ago and it didnt come, i contacted their customer support, fedex customer support and i re filled out the shipping form (I live in mexico). I wanted a refund but they said theyd charge me shipping for there and back which is like 60 or 70 bucks.
No but those that go above the controllers will hinder tracking
Gunstock gang on top.
nah bro watch anime
What’s the best gunstock for meta quest 3 it will be my first gunstock
@fossil pumice
I kinds found one of Etsy
Idk if it sbetter
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
🔒 This channel is closed with wipe events. Go to General!
woah
im like totally the first person to speak here in DAYS
anywho, how big of a “game changer” is a VR gunstock, I wanna hear it from someone other than the sponsored YouTubers haha
The Tomahawk
I own it and i really like it
you are for all practical purposes you would be considered "sponsored" haha
But yes the Tomahawk is solid choice, top end of pricing if budget is a concern and can take a bit of time to get.
!gunstocks - this is the vetted list of suggestions from the channel.
Let me know if you have any questions on any of them.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Im not sponsored
Which is why you are allowed to spam Tomahawk to every question haha
Like ive told you multiple times i recommend what i like
Yeah thats the only gunstock ive stuck with
there is also a simple call of !gunstocks that gives the user a wider selection to review and determine what will work best for them and their budget needs. 😉
VS. a one size fits all approach
but we (me and every other maker not Skol) have had this discussion before... so no reason to rehash and have the same talk again now as nothing will change.
Y'all think this is a good setup?
Im new to vr and basically got what sounded the best while being semi cheap
Should I buy a real one
If it works, it works...
I want to recommend what i use and ill do that
Are quest2 grips the same size as the quest 3 or 3s?
very good setup if you ask me
Not entirely.. but very close
top gunstock for Index. Thoughts pls ty
!gunstocks - check out the Armory-R1 by VR Tactical Gear and save 5% with code VRTG
There are a some others on the list as well to consider
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
As long as it works for you, absolutely!
what gunstock is it
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Magni stock+
ok thanks
i need a new gunstock for my meta quest 3 i want the best of the best money is not a problem
🔒 We are currently updating. Go to general!
No
Whats the cheapest possible quest 2 gunstock that is top attatching?
Tomahawk is amazing
I own it, if you have any questions feel free to ask
bro its so expensive is it realy worth it
In my opinion it’s worth it definitely
oh ok
I don’t see any other gunstock that can fold in less than a second to fit your weapon type
fair
If you have any questions feel free to ask me, you can use the official discount code SKOLVR5 for 5% off
no i dont have any thx
Whats the best quest 2 gunstock for under 20 bucks?
How do you open the menu on virtual desktop in game w quest
?
you hold down left joystick (atleast thats how it is on steamvr)
I have the cgrip had it for a year if yall ever think about buying it. Don’t. It messes up your pitch and its length is set for perfect use without attachments only for weapons that have a short range between your controllers. So snipers, bar, and certain shotguns will have a horrible pitch no matter how much you adjust it. And on top of that it takes 30 minutes to adjust it. I’d rather just play virtual now. 3/5 stock
i made a gunstcock out of FEnt AND STEEAL
Ohhh bet thank you
airball
Can the Magnistock+ be used left handed
Thats why i dont go cheap with stocks lol
i have a top mounted stock from olen vr with a quest three the calibration is so off to where my stock is pointing in the air while my gun is straight in game ive tried the calibration but it just does not work.
follow the calibration guide in the pin, it tells you everything including how to clear out corrupt settings and how to calibrate a gun in ~5 seconds
Can the magnistock+ be used left handed
Does it fit quest 2 controllers?
Fent?
any stl files that someone can recommend to make a gunstock for tabor? just trying to figure out a project idea atm
SKOL VR!!!!!
is the gunstock worth the money?
very much worth the money
ty 😄
yw
Anyone wanna play
btw is it less shaky?
i cant sorry
honestly not paying that much for that its uflly 3d printed nah
To use group finding channels, link your Ghosts of Tabor account to this Discord: https://bit.ly/414HKcZ
I so gotta make sum like this at school, what did u use for it? Do u think a wooden plank would work if i shape it so that i got 2 parts sticking up? And how do u get ur controllers on it?
Pcv pipe
Wait chat for a free gunstock pretty much can it be possible to tape/glue 2 empty toilet roles onto a stick!???
Its all for stability right
nah not really cuz the attach and the deattach is gonna be basically impossible
and its not gonna be possible to click the buttons
Skol VR tomahawk my beloved
Yesss. It's SOOOOOO GOOD
Even better mine says my name 😆
💯
The best 3d printed gunstock out there. I used to think just like this with my Mamut Apto 3 Wasp. Like nothing 3d printed could compare but damnnnnn was I wrong. This is made by someone with countless hours in vr who listens to the people and gamers both professional and hobbyist alike. Even just go with the SMARTstock and you will see. Honestly the best in between will be the Butcher.
i have 750 budget for a gunstock i really dont wanna just buy a 3d printed gunstock
Skol VR can't go from q3 to index? So I should just wait to index controllers if I want to get the 3 in 1?
I feel this trust. But having tried almost all of em I can't argue with what works. But if you want flashy and wow factor that is still great, Mamut apto 3 Wasp with the haptic buttstock from protube would be good. But even with my Apto I still use my tomahawk. Its quick in adjustability and light and sturdy af. Now if I had that haptic buttstock I'd probably use my Mamut more just for immersion factors. The mamut also has the weight like a real gun which I liked but other don't and after using the SKOL I do prefer the lighter stock. Haptics would be cool tho
Really late reply but I can
Is this a good gun stock
tiktok shop gunstock go crazy
Ik right
no its not good
Ight
I use the Skol Vr tomahawk and I love it
the tracking is bad and will hurt your wrist from it being straight
Ok ty
ye thats not what he asked
I’m recommending a gun stock
44 dollars probably not
if it isn't fake then it'll work
i've used cheaper gunstocks they weren't very fun but they did stabilize my aim
but for 44 dollars it's either made of plastic wrap and hopes or it's fake
!gunstocks - @proven drift @undone venture actually the CGrip is definitely a solid budget entry gunstock and on the vetted list. It has been around for a good long while and is certainly worth considering as an entry starting point depending on your budget
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
why you telling me about this I don’t need that thing
Because you are crapping on it with ZERO knowledge about it or research ;P
although @undone venture I would suggest going with the Etsy vs the Tic Tok... but that is personal opinion
was going to say that
I'm gonna look for some other gun stocks to print
sanlaki has been fine but I want to try a good top mount
There is the ManDude by @stuck gate if you haven't seen that one yet
I do like how sanlaki actually feels like a gun becaus of the iron tubes and the shape
i don't have a gun stock
What is the best gun stock on Amazon
glistco but if you can just buy a one from online
That sling has only one hook on the gunstock 2 point sling is always better in my opinion
Oh ok
I have the 2 mounting points but prefer the 1 point sling. It hangs right where I need it vs 2 point wanting to flip the stock over due to the center of gravity.
Does anyone know a decent gunstock for about 25 pound or lower
Amazon
!gunstocks trustworthy list and atleast buy the cheapest gunstock from this list
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Where's that
I just showed you
OK sos
what gunstock should i get i dont have a big budget
which gunstock should i buy i have a budget of 50
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Do you have v stock on and janky aim fix on
Yes a lot
Anyone wanna play
H
!lfg
To use group finding channels, link your Ghosts of Tabor account to this Discord: https://bit.ly/414HKcZ
Is the protube guy on rn?
Hi, im looking to make a gunstock without cash. My first idea was to use a stick and glue something on to hold my controllers. Any ideas?
You can use cardboard with duck tape and toilet paper rolls for the controller cup
You can use cardboard with duck tape and toilet paper rolls for the controller cup. There are tutorials on YouTube
Where do i get cardboard? Like boxes u mean? Prob got some laying around but idk where to get them
!drops
When do new Twitch drops release?
Our current drops starts on April 18th
and end on April 21st
How do I redeem a Twitch drop?
You will need to link your Ghosts of Tabor -> Twitch
You can link your preferred platform here: https://bit.ly/42Cflwa
I own FF / Independence Edition, do I need to still watch?
Yes, these are not counted as DLC. You will still need to watch your favorite streamers to redeem!
I need your help!
I'm not sure which gunstock I should buy. To those who have the magtube is it easy to connect the controllers to the magnets? I currently have a cheap one from Amazon and although it already has strong magnets I'm having trouble finding the right spot quickly. Otherwise I'm thinking of getting one without magnets, for example the skolvr smatrstock. What are your experiences with magnets? Thank you for any help
magtube rules. you dont even think about it
Ok thanks. So you have No Problem with it?
i dont know what problem you would have with it
its a fantastic design, easy to connect, adjust the size and shape it to be ergonomic for your body and its second nature
having a stock be appropriately sized for your body is the key part for all stocks, no matter the design
so non adjustable ones are an instant no go for that reason, plus it wouldnt even account for how the game is designed
I think i will buy one. Thank you very much for your help!
!drops
When do new Twitch drops release?
Our current drops starts on April 18th
and end on April 21st
How do I redeem a Twitch drop?
You will need to link your Ghosts of Tabor -> Twitch
You can link your preferred platform here: https://bit.ly/42Cflwa
I own FF / Independence Edition, do I need to still watch?
Yes, these are not counted as DLC. You will still need to watch your favorite streamers to redeem!
People have used everything from pvc pipe to coat hangers with success. Just keep scrolling up in here and you'll find plenty of examples.
🔒 We are patching! Go to general!
whys it so hard to calibrate bruh
tabor's gunstock system isn't the best, but also some gunstocks are just annoying to calibrate or dont have enough adjustments to get a perfect calibration
When I calibrate my gunstock some times it works fine sometime I have to point my gunstock up to get my gun straight
Anyone know a fix?
follow the calibration guide pinned in this channel, it will tell you how to deal with any potential errors you have and how to calibrate a gun in 5 seconds
Im trying to make a gunstock for free, using stuff i can find home or outside. I cant use coathangers we dont have plastic ones only ones that are more expensive and i cant just cut one up. Any ideas? I was thinking maybe a straight branch/stick or something
What is the best gun stock for tabar UK shipping cuz my aim is wank 🙏🙏
bro this is the vr gunstock chat
Who wants to duo
Not from spectre
anyone know any cheap gunstocks, or people that will print thrm?
how is it hard you just move the gun to where it's comfortable
mx sphere ☹️😔🥀
Whats the best vr gunstock for 40 bucks or under. Quest 2
Does anybody know of any good gun stocks for like 20 bucks?
what is the best gunstock for tabor
yo do yall know if the magtube is better than the tomahawk
Better is subjective
There's plenty of resources on how to setup magtube for tabor, and how to get the most out of it.
Also its on sale
cardboard/pvc, and some diy
DIY
Cant really get any decent ones
A person in a server I’m in uses a modded crowbar
yo how much does a physical gunstock help with aim?
Significantly
u
What gunstock y’all have, I’m so bored rn
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Tomahawk
Anyone got any good gun stocks that are decent priced?
see two posts above you... vetted options and prices listed
Tomahawk seems way too expensive now
What is this one?
Would anyone like to play after my raid?
Sure
i just hopped off maybe in a hour?
Nvm
What stock should I get for 50 dollars preferably from Amazon
Don't remember the name of it
Search up gunstock on Amazon
Magtube best bang for your buck on the market
anybody know any good gunstocks?
I have the same gunstock
Nine
Does anyone know how to properly calibrate a stock btw it never seems to work for me
Just lyk ultistock with the forearm brace is the only one you need. Ever.
you cant the tabor calibration is ass
Who know a good stock, that is east to out controllers in fast
Yeah the tabor calibration is so ass. Best you can do is adjust the hand offset if you really want but it’s not the best to play with nor is it great in general.
Me who never had a issue with the calibration
Magtube best stock on the market
whats the cheapest gunstock i could buy
Some random gunstock from Amazon
Or
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What's a good gun stock I got 40$
DIY or maybe cGrip or ManDude plus shipping
I got a really good gunstock off Amazon for about 35 bucks
This one?
Could be this for 32
For 46 after discount, theres a "onestock" has a pump action, so may be worth considering
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
i got this one its arriving tuesday ill tell you how it is if your still lookin for 1
Any good cheap stock recommendations
I picked one up a week ago to scrap for parts, puting together my own stock.
was it any good?
Its decent, just dont overtighten the parts and you should be fine. Not the most durable, the cheek riser doesnt have fixed positions and can move out of place. Its just a pipe with 1 skrew holding it in with pressure. The grips are pretty comfortable to use, they're adjustable.
damm
I drilled holes into the riser so the skrew has somewhere to hold steady.
Yes that’s it!
after buying a $60 stock im annoyed enough to just make a pvc stock and fill it with concrete
holy cheap products Batman
Anyone have good DIY resources?
NOT 3D printed
Nothing wrong with 3d printed if you think so you just got shitty 3d printed the best gunstocks are 3d printed and if you want to drop 200 plus on a non 3d printed anything gun stock go ahead
I probably need a better supplier cause the fiber they used for the joints are terrible
I just don’t wanna pay $500 for a 3D printer or another $60 for a rip off lmao
I was gonna say I’d drop $40 at Home Depot and use the magnetic grips that came with this cheap kit haha
So as I don’t own a 3D printer, I was asking for DIY, but thanks
Sorry my fault just your message came across me as in like you hate 3d printed gunstocks
skolvr
peins
I have a cardboard and duct tape gunstock, am I cooked
Magtube superior to every stock
I concur
Should I buty a magtube carbon or build it myself
I think I will buy one
i bought the exact same carbon tubes form amazon and got delivered overnight here for like 1/3 the price
but I highly recommend the carbon either way
what about the other parts?
Get everything u can
I'd also recommend picking up the mk2 buttstock straight away. It makes it so much better. You can quickly adapt to more guns with the cheek rest being able t just slide up and down vertically.
Now's a great time while it is on sale 20% off. As others have said you can swap out the chrome tubes for carbon you procure elsewhere should you so desire. 👍
is there any decent gunstocks under 50???
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
It is in USD so your currency may vary
Nah build it yourself it's cheaper itl save you a few hundo
I dont have a 3d printer
Well there's services online that'll 3d print stuff but in a month il be releasing the tough stock that's gonna be just like the protube but half the price
Yeah check out the smartstock
You can use discount code SKOLVR5 for 5% off
100% build it
Magtube is literally just overpriced tubes with cups on hinges

What’s the best gunstock?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Ik but I need a 3d printer for the parts
I can make the exact 1 to 1 replica of the magtube carbon for wayy cheaper
Just need to 3d print all the plastic parts
Nah just tape, glue, pvc pipe, hinges, moldable plastic
this is what I want to do though
or I could design my own
actually I will do that
I have a 3d printer and a resin printer if you need help
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Anyone have a good cheap gunstock?
doesnt get cheaper than this haha
If your broke do PVC pipe
What do u mean what’s that
can they make it so when u use a gunstock u can use like all the grips, I want that lowered recoil n the stablity of my gunstock, but it sucks cuz i cant use an angled grip with my gunstock
the grips are designed the way they intend them to be, so you'll want to adapt your gunstock to use the grips you want. keep in mind the shift grip has pretty much the same stats
Anyone have a good gunstock up to 40
The image the guy sent
There must be smth good up to 40
Man you ain't going to get any good crap for 40 bucks
You got that but that falls apart within a month
I got quest 2anyway
I'm willing to spend up to like 70 pref lower what are good ones
they have a quest 2 option
!gunstocks There's a couple options.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
The pvc pipe in question: 🥀🥀🥀💔💔
can anyone recommend a good gunstock for quest 2 / 3 ?
what is your budget?
It's kind of personal preference but I would recommend the SKOLVR Smart Stock at https://skolvr.com/
description says "ONLY Quest 3/3S/PRO". But the name says "For Quest 1/2/3/3S/Pro/Rift S". Im confused 😅
what headset do you use?
okay so the smart stock is compatible with both Quest 2 and 3
Alright perfekt. Thank you
ofc
check DM's
hey guys i need your guy's opinion on what you like do you guys like open cups witout magnets or closed cups with magnets?
Is there a brand that has the option to add a second controller type. I have quest 3 and index controllers and would prefer to buy one stock and be able to swap out controller holders as needed. Also it appears to me that a lot of stocks are 3d printed, is this an actual assumption
thats been standard procedure for protube prodcts for over 8 years. just change the cups
Anyone help me design a good gunstock pls
That takes a lot of time, effort, and material to do... trial and error etc... that is a personal project vs someone else making it (generally)...
eh fair
i only was having trouble with one part anyway you can help me?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
honestly I don't have the time to assist and I am not the best at design work also.
damn it was just i cant get the locking angle thing that you use to lock in a posisont when you loosen the angle rod thing
that is a lot of angle and thing ...
Look for Hirth Joint
ok thx
Is the pro tube worth it
Does anyone else’s guns when using a gun stock like to glitch up and down? I’m on quest and I’m using the Olen vr asset gun stock
Some times the gun will be pointing way to far up or down even after calibrating it and it will be fine for the first part of a raid but if I put my gun on my holster and pick it back up again the glitch happens
Idk for me it’s tracking problems but for smgs it’s same with me
I would say so, yeah. I've had mine for a year and a few months with 0 issue.
Thank you
yes
Best one for cheap CAD btw?
What’s a a good cheap stock I can buy?
Check pinned chats
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Does anyone own the onewield vr stock
for a first time gunstock user with a valve index is the armory r1 a good choice??
no
i the weild onestock good?
Yes but i made a few modification to mine
Yes but it takes getting used to 2 cup mounts, really light and easy to adjust. If you slightly loosen the mounts, you can adjust their position without tools but be tight enough to stay without extra force. Dont use it as often, but i do when i plan to use shotguns.
They also provide a stl of their mounts so you could make custom ones.
any tips on calibration
Other than what i mentioned not really, i just find a position that works for me. Sometimes remove the front and put it at a 45 degree angle. I did make some personal changes like a smaller padded stock and magnet mount. Helps with games that have difficult calibration. Dont have to worry about a cheek rest.
any one know of a good gunstock i have £65
This one’s free (as long as you have access to a 3d printer) https://makerworld.com/en/models/741087-best-vr-gunstock-u-can-t-buy-but-print-quest3#profileId-673504
Hey guys I just got a protube gunstock and I am having trouble. Calibrating my guns what do I do I make it so it’s in both hands or up to my face the gun ?
hi guys, anyone know a good stock for quest 2 that i can 3d print. i have an ender 3 pro and want one to use before i buy a good one in a few months.
hey i have mine set up to where the stock will be on the sholder with the left hand oddly to the right side
Check out the Smartstock
get the full carbon version, then its the 2nd best gunstock you can possibly get
i love my magtube personally
what do you guys recommend, budget of 50$ and i have a quest 2 (i know it’s a low budget but it’s what i got)
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
extremely overpriced
you can save and get a good 3d printer for that price
then with that you can easily make your own better ones
what do you guys think about the cgrip gunstock for tabor specifically?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Finally got my protube in
Does anyone have a good one for oculus 2 I have it hooked up to a beefy pc so…..
Ya I can run it on pc
The Tomahawk is really good
Also the smartstock
honestly u should gte a quest 3
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
what yall reccomend for someone whos never used a gunstock?
what is a good stock but still cheap
smartstock
like under 50$
pvc pipe and tape
jokes aside you can try the basic butcher if you dont need a stock
just check out !gunstocks
Tomahawk
Yeah the smartstock starts at 35$
ill just get one off of amazon
Okay
I’m getting a weld VR gun stock soon are they good?
The butcher would be the better choice if you have the money
You can use discount code SKOLVR5 for 5% off
Anyone wanna play?
I was looking into it and thought that the tomahawk would be better for the price, but thank you for telling me about the discount code
Theyre good, but i did find it difficult to grab the cups at times with the sling. Made changes to incorporate a magnetic holster
I own the Tomahawk and yes i can say that it’s really good
I have it as well, its also great
Thank you
Anyone wanna play?
Recommendations for gunstocks under 50?
yo yo yo can i use a different controller cups for the raidr? if so what brand?
what is this
Protube quickly is garbage😭 Just opened mine for my b-day and the controller holster snapped in half
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
That's sick
One not part of that list is the stock I use, the asset from olen vr, it's been doing me well and it's relatively cheap coming in around $60 for the base stock, there are also moldable attachments, for a 3d printed stock i find it stable and durable, I'd recommend giving it a thought
@tall kettle didnt like using the sling, found it difficult to grab the cups at times. With the magnet I always know where its at.
If i get a metal stock like the magtube in the future I might steal that idea
Go for it, not the hardest modification. Ive done it to 2 other stocks already.
Already upgrading it to a sturdier sytem using picatinny rails
@tall kettle So the way mine works is that on top, theres a 1mm ridge for the stock magnets to ride down over the holster. When its fully connected, theres a physical and audible snap. The other end of the holster omits the ridge, for the stock to slide down and off.
🔒 We are investigating the login failure. We will update as soon as we have a resolution
does any one know why when i want to calibrate my new gun stock (wield vr onestock) it just spring over to the normal mode after i press confirm
can anyone recommend me a good vr gunstock? budget around 70€
Yo does anyone know a good face pad for quest 2? The original one sucks ass
!gunstocks check this list, get the best one for your budget (look at reviews nd shit first) and make your decision
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
That's not normal at all. Make sure to go through support on the website and we can send you a replacement covered by warranty ASAP
Can I join you?
🔒 We are updating. Pay attention to #📢・patches !
1
?
Do yall have any tips for snapping the controllers into place on quest 2 quickly or is it sum that you slowly learn
idk
Could someone respond? Need a new one
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
no
Prefer someone who doesn’t need their hand held into a store
ye no i can drive
bobavr fan inteface
Have you seen GunFace or Pulsar? $70/$60 link in my bio
.etsy.com 
Im good man
Already bought magni glistco
What do you have against Etsy?
Where would you prefer a home hobbyist offers their wares?
You will find far more literally junk quality stock on Amazon than you will on Etsy haha
It’s like iPhone vs Samsung basically
“I don’t want that Chinese crap” but the iPhone is from China and Samsung is out of Vietnam lol
Dm me to join a ghost of tabor team
U can play raids with people in the server + if someone TK’S u just send proof then we give ur stuff back so what r u waiting for JOIN NOW !!!!
make sure you have physical gunstock setting enabled
Lil super glue fixed it up😂
The screw in the controller holder was screwed in to tight
It’s still amazing, its all great quality
Its the same
Its just the Name ”businesscompanyvr.etsy.com“
Not Saying that hes not legit but I would work on a new Name
i have stick drift so i can’t calibrate my gunstock for each gun
Whats a good but budget friendly gunstock
Coat hanger and tape lol
Lol but I have a budget for like 50 bucks
Yeah no, most of them on the market made for like the meta quest or what not are like 130+ USD
Crazy work for a gun stock
I saw one for like 40$ but it looks like something i could make in the garage for 10$
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Smartstock
Possibly looking for a gun stock trying to see who was a long time free hand player before going over to gun stocks and what their opinions are?
If your hands are stable WITHOUT. a gunstock, I don't think you NEED one. Gunstocks improve stability, not aim, aim comes with skill and practice, stability is just if you have it or not
I have solid stability in the hands even with the scopes. Thought maybe shot placement and snapping would possibly be easier.
imo if you don't have shaky hands, you don't need one. There are a lot of things slower with a stock and you're relying on the calibration not to bug or break and some of the skolvr style stocks make it annoying to take off if you want to play something else. If you want one for immersion, that's also a decent reason to get one
I am looking for playability as my skills dropped off or I got left behind with this new health system and kids are popping me in the face or neck. I use to be. Good with center mass but aiming for the head has been an issues seems like I just need practice more than anything
whats a good gunstock
Gunstocks really don't help with raw aim, which seems like what you're talking about. If you use firearms in real life they can help you since it'll feel slightly more like you're holding a rifle
!gunstocks are all good. I personally use Protube's Magtube
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Yeah the bracing of a fire arm is what I was thinking with improved aim but I would assume not then
It does add immersion and if you know how to use guns mainly with ADS speeds with a buttplate it can help a bit. You can try one out and see but in my experience if your hands are stable, improve your raw aim
For sure
It definitely won't give you aimbot or somthing, but it does make aiming much easier, your hands will always be already aligned and ready to fire. Less shake/jitter, and no artificial slowdown/smoothing compared to Vstock. It helps a lot with aiming but you still have to point to the head yourself ofc
That's what I mean by it helps with stability more than raw aim
How do I even go about calibrating my gunstock
Every time I try to calibrate it, my main hand just points downward when the gun is calibrated, like I actually don't understand
Just potting it out there the cgrip stick is amazing I’ve been using it and I’ve been loving it
I don't feel like a gunstock is worth it can someone one prove me wrong?
If you feel your aim is fine and not shaky at far ranges then it’s not worth it. If you have shaky hands they help so much
What are some good gunstocks
I absolutely love my magtube made by protube
Does anyone have suggestions for a stock for quest 2
Get the skolVr smart stock magnetic if on budget if not get the butcher from skollvr
I can now join this channel
Anyone want to play tabor
/g
The tomahawk is nice
Smartstock,Butcher,Tomahawk
Need a cheap q3 gunstock
I really like my magtube made by protube
Budget?
Under 100, you got the skol SMARTstock, Ultistock, and Astreus.
I use and can recommend these. All great, each have their own benefits.
What's a good gunstock for under £150
Not much Ngl
How much are you willing to spend
Not a crazy amount 100 at a push
I personally like the magtube by protubevr
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
$100 is pretty decent ngl
Yeah birthday soon
Mine’s was 2 days ago lol, happy early birthday
Maybe ultistock they are pretty good
@uneven monolith
Thank you a true hero 🫡
@uneven monolith If you don’t want that you should get skolVr smart stock but only magnetic non is buns only if you want though
The magnetz of my gunstock lets my controllers freeze for a few second, any way to fix that?
Is the pro tube worth it ?
no
Yo i js got the magtube pro n i tried calibrating the guns but it works somtimes, somtimes not is there a fix for this?
no
send a bug report
100% yes if you can afford it it’s the best gunstock on the market. Plus their customer support is godly
Don’t use the in game gunstock calibration just use the joints on the protube to make it align perfectly in game, I think scope of has a good set up tutorial one second let me try finding it.
Here it is https://m.youtube.com/watch?v=AU8k8ZaNrqE
Also just make sure when calibrating your gun stock irl you have virtual gunstock off as it can mess up alignment
Yeah this works thx bro
Don’t worry if it takes a bit to get set up. Once you get used to what needs adjusting u will be able to set up a new gun in like 2 min.
Does anyone have magtube discount codes?
I don’t think so but watch the protube discord they often have promotions or special discounts during holidays.
Anyone know of any gunstocks for the focus vision?
Butcher or the Smartstock
anyone here has experience with the magni glistco+ for oculus 2 and tell me if its a good stock?
One stock
Yes, and it’s very snappable go for one of the gunstocks and find your price range below.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Magtube is the best in the game and always will be the best bang for your buck
You guys I literally instead of bought a nice gunstock I 3-D printed one and I think it works just as good
Awesome. not everyone has a 3D printer, but definitely the most economical way to go if you do.
EXACTLY
is there any trick for gunstock calibration? when i calibrate the gun that appears in the tool, my gun that i want to use is still not aligned correctly and when i then switch to another gun, its also completly different allignement
drop the gun when you go to calibration and then pick up yours
i do that
the calibration tool gun is perfectly aligned but my gun then is either a bit to low or the scope doesnt align at all
idk then i dont even have a gunstock 💀
anyone got a way to make a gunstock with house held stuff?
Ight firstly what gunstock you using?
Just scroll up for a bit you will find plenty of posts for diy gunstocks
It was just 20% off for Easter. As others said keep an eye on our socials for next sale. you can also sign up to the newsletter at bottom of any page for 10% off one purchase
Make sure to check out ragesaq and scopeog for setup tips
https://clips.twitch.tv/PricklyTubularBarracudaPicoMause-vxFUP585vkUbiZyi
the guide pinned in this channel has a comprehensive step by step process for getting it calibrated along with a video that shows you how to do it in about 5 seconds
yooo i watch your vids
my vids? which ones lmao
sure you don't mean one of the people I linked? 😂
no i watch protube vr
If you want something you only buy once and can use forever, can't go wrong with a MagTube
I'm sure others have plenty of suggestions for you to consider
none really
I meant people in this channel
ohhh
Lots of people use the MagTube, including a lot of content creators, not hard to find all sorts of videos reviewing it, and tips and tricks on how to get the most out of it as well
All of which can make it much more beginner friendly, because you can easily reference guides on how to quickly get used to it and set it up for the first time
Is buying a gun stock worth it?
Yes
I LOVE my magtube made by protubevr.
whats a good beginner gunsock
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Whats your budget
The ultistock by brandovr I would say
I wanna get a gunstock but don’t know what one I should get, what is a good gunstock I could get with a budget of 500?
What’s the best gunstock for quest 2