🔫・vr-gunstock-chat

[pure crown]

That’s on the official site

You probably didn’t get it fully carbon

[dire frost]

Oh USD price is shown without taxes, and euro prices is shown with taxes that's why

[pure crown]

Still 200 euros

[brisk summit]

I need a bit of help from the gunstock community

Can anyone help me?

[pure crown]

What's up ?

[pure crown]

Yes

[brisk summit]

In ghost of tabor im trying to calibrate my gun stock but

When I aim my gun is aiming sideways

[pure crown]

Which gunstock are you using ?

[brisk summit]

I don’t know

Was on a budget so I bought it from an app

[pure crown]

I cant help you if i dont know what gunstock you are using

[brisk summit]

Does it have to be an expensive one ?

[brisk summit]

?

[lunar girder]

tjis one seems complicated

[lunar girder]

no it doesnt

but i created my own and works fine without calibration so try it without calibrating

[pure crown]

I cant help you if i dont know your gunstock

[modern grove]

Hey man try following the pin to delete your save game file and then re calibrate following this guide

#🔫・vr-gunstock-chat message

Also make sure you do not turn virtual gunstock back on after calibrating your physical

[rich gyro]

didnt want to wait for etsy to ship me one so i just finished designing one to print for myself

new top VR is the left controller too high?

[floral echo]

Good morning. Magtube.

[floral echo]

Really depends on how far it moves up/down/in/out

But gut says probably

[pure crown]

Should i get one...?

[pure crown]

A gunstock ?

yus

You should tbh

but im worried about using a pistol with one

how will it work?

[pure crown]

Then you need a snapping design gunstock

[ashen hull]

Wanna see my seemless swap to pistol?

[pure crown]

sure

[pure crown]

Yeah he uses 7thvr

[ashen hull]

Moments after this I got absolutely rekt 😂

[warm thorn]

Only reason to get a gunstock is to use a sniper

Imma be real

[pure crown]

Stability as well.

[pure crown]

or if you want more realistc feel

[warm thorn]

Bro

Are y’all tryin to make excuses

[ashen hull]

Absolutely yes I am 😂

[warm thorn]

lol

[ashen hull]

Bro climbed that ladder at like mach 50 picked up his friends gun and started shooting

[warm thorn]

🤫🧏‍♂️🥍

[ashen hull]

My dumb ass was like aiming click click click, I had no ammo left 😭

[warm thorn]

Honestly best tip out there

Is use grenades

[ashen hull]

Oh me and @pure crown discovered that hahahah

[warm thorn]

I wiped out a three man solo last night that was geared to the teeth

[ashen hull]

damnnn nice!

[pure crown]

So you want a snapping design gunstock correct ?

[warm thorn]

Two ak alphas / one scar / and all of them best armour on matka

[ashen hull]

😮

damnnnn, I'll be playing again tonight! Very hyped

[warm thorn]

I used one grenade lol that I found on the ground

Now grenades are going to be a permanent kit necessity for me lol

[ashen hull]

they're truly helpful

[pure crown]

yes one that i can switch to pistol quickly

[pure crown]

Check out 7thvr.com

If you dont like it i can recommend more

[vernal arch]

Am i the only one whose guns are pointing to the left now since update when using a stock? I dont use in game calibration btw (physical and virtual gunstock both off)

[pure crown]

Delete save game files

I've heard that helps

[hollow zinc]

A lot of gunstocks lack angle adjustment too which makes this frustrating

[flint copper]

Hey brando whats the front grip like on your gunstock

im ordering one

[hollow zinc]

I have a couple different styles.

[flint copper]

Do you have pictures of the different styles?

[flint copper]

I see this is really helpful, this is when you get it with front end grip?

[hollow zinc]

Yes, so you can get it with front end grip, choose the type in personalization. Or you can get the kit plus which comes with both types and the forearm brace. Full kit is more about giving you all the parts to have a classic and XL size configuration to play around with but you get one front end grip with it, your choice of which

Hopefully that makes sense. Kit Plus is the best deal for attachments. Full kit is best deal for having different sizes

And of course you can order a classic or XL with just the front grip of your choice

[flint copper]

Thank you man, this really helps a lot! do you prefer the front end grip or forearm brace? I mean I am a first time gunstock user so this is new to me and I wanted to know im 17 so what would be the best size to get?

[hollow zinc]

For Tabor definitely the forearm brace

So much more versatile

[flint copper]

for pistol and such

[hollow zinc]

Plus I'm not sure how you'd do a bandage with the full front end grip lol

Yeah pistols work great with front end grip, everything is mid mounted on the grip so the bottom of the grip is open to handle just like usual

[flint copper]

compact is better because you're able to utilize more things

[hollow zinc]

Yup, and that's just the start of the benefits. The speed is absurd. In contractors showdown I can be flying, let go to ads with full two arm stability and then grab back with the same speed as freehanding but the stability of a full stock. It's why I'm patenting the thing haha

[flint copper]

Thats amazing, I really like the way you run your business compared to some companies, you are active in the main game that is the wave right now and you actually give feedback, I ordered a gunstock from Olen and I never even got the thing so props to you for doing what you do best man!

[hollow zinc]

Woah that's crazy man. Did they give you a refund? (And thanks for the props, I appreciate it)

[flint copper]

No, we didn't even get a refund??? they only have a cloud that they reply so weak and its kind of weird😭

[hollow zinc]

Holy cow that's weird.

[flint copper]

as of rn Im looking for my wallet💀

[pure crown]

They robbed you 💀

[hollow zinc]

Yeah I'd report them to your credit card company and the Better Business Bureau

[flint copper]

Ikr😭

[flint copper]

its been since december of last year so its not even on my mind, just ordered one🗣️‼️

2 I ordered 2

[bitter cargo]

Does anyone know anything about the Cgrip vr gunstock?

[pure crown]

I dont at least

Are you looking for a gunstock ?

[bitter cargo]

Yeah, just don’t know what kind to get

[pure crown]

Would you like a gunstock that snaps in 2 like the raidr ?

Or a different design

[bitter cargo]

Idk, wouldn’t that be hard to put it back together tho

[pure crown]

No

Its muscle memory you will learn in the first few hours

[bitter cargo]

Oh, ok

Idk, is that better that what cgrip has?

[pure crown]

Yes

You can ask anyone here they will say yes

[bitter cargo]

Ok

[pure crown]

If you have money and patience get the raidr if not buy the 7th from 7thvr.com it costs 50% less then the raidr

Both have the identical design

[vernal arch]

Does that reset my bunker etc?

[pure crown]

Im not sure

[ashen hull]

I wouldn't say identical 😄

Pretty similar though

[fervent void]

Go for SKOLVR.com

[ashen hull]

Isn't their full stock almost £90? might as well get the raidr

💀

That's like saying you want to buy the ferrari (raidr) but you opt for the nissan juke (skol) just spend the extra and upgrade

[cyan wagon]

Got my tomahawk in yesterday. Still getting it calibrated, having some minor issues that the creator is working actively to get resolved but quality wise....this thing is A+ the resin is strong, the ball bearings that assist in locking the folding sections are very strong, the magnetic connection is VERY strong. screw/slides etc, I would say are very well designed. Overall I think the whole stock is "over-engineered" in the aspect of your grandparents refrigerator that is twice as old as you and still doing its job.

I know ragesaq mentioned yesterday it was poorly designed and interferes with the IR nodes on quest3 controllers. that does not seem to be true

https://www.tiktok.com/@skol.vr/video/7294052893458550049?_r=1&_t=8kJkKKPpeGf

sample video from SkolVR demonstrating the IR nodes

[pure crown]

Overpriced and weights 800+ grams

[ashen hull]

Sorry

It weighs 800g??!

[pure crown]

Check gunstocks reviews here in this chat

[ashen hull]

Wow

Can get your workout in while playing VR

[fervent void]

When you are not able to touch the sun the first thing that you say will be : “ omg it’s so hot”

[cyan wagon]

Is 800g a lot to you?

[ashen hull]

For something you're playing VR with, it's a lot compared to the Raidr being what 350g?

[fervent void]

He newer touch a skolvr gunstock mate😂

[ashen hull]

7th is 185g, I'm sure the Ultistock is light too

[pure crown]

Its a lot for a compact gunstock

[cyan wagon]

lol youre complaining about literally 1 pound

[pure crown]

I go to the gym and its not a problem to me

Im just stating that it weights more then a magtube while being the price of one

[ashen hull]

800g is almost 1.8 pounds

almost 1kg

[cyan wagon]

and the difference between 800 and 380 is about one pound

[pure crown]

And dont forget the absurd price tag

[ashen hull]

No I know that but I'm saying it adds up

[cyan wagon]

protube costs the same amount as skolvr

[ashen hull]

they're charging almost the same as Raidr, might as well get the raidr for what like £12 extra and get a lighter stock

[pure crown]

Lighter + Stronger

[ashen hull]

true

Mostly metal construction right ?

yet still lighter

[pure crown]

And dont forget that the raidr snaps in 2 for easy pistol play

[ashen hull]

Raidr is on top still 🫡

[pure crown]

Yeah 💀

[cyan wagon]

so does the tomahawk lol

[pure crown]

I would say im way more in shape then you will every be if it has come to that

[cyan wagon]

wait, have any of you even used the raidr yet?

[pure crown]

The tomahawk is 130 brittish pounds plus iits made of weaker materials

30 brittish pounds more then the raidr 😭

[cyan wagon]

i literally took a belt grinder to my tomahawk last night

its not weak.

[ashen hull]

Format is the same as pretty much all magnetic stocks. Mine is literally identical in terms of layout so for all intensive purposes for the most part yes

[cyan wagon]

and no, im not kidding.

[pure crown]

My point still stands. The raidr is stronger and cheaper

[ashen hull]

magnetic stock like raidr

only different is material basically

Raidr is also customizable

it's gonna be sexy

[cyan wagon]

no...your point doesnt stand. tomahawk isnt weak. and you havent touched a raidr yet. so anyone comparing the raidr to anything else...is moronic. the only thing you can compare is price points currently.

[pure crown]

No

[cyan wagon]

you have touched a raidr?

[pure crown]

I know what its made of and the weight

[cyan wagon]

its odd to me that you somehow have a quantifiable opinion of a product youve never seen irl or touched lol

[pure crown]

Raidr doesnt have a single flaw could you stop being stuck on one opinion its embarrassing

[plucky ember]

I second that

[ashen hull]

Okay so basically I'm riding an electric motorbike with my 7th, the raidr is a proper motorbike. They ride the same feel similar so it's safe to say I know it's sick to ride a motorbike if I rode an electric one. The same example applies here bro

For all intensive purposes, the raidr is gonna be sick

[cyan wagon]

the smart move would be to wait for the raidr to arrive then give opinion

[ashen hull]

Bro thats what it is

an opinion 😄

[pure crown]

The smart move is to not recommend an overpriced gunstock that isnt even metal

[ashen hull]

I you're not fond our opinions you say something like "Hey man that's a great opinion but have you thought about XYZ??"

[plucky ember]

The smart move would be to stop riding the tomahawk so hard VOID

[pure crown]

Real 🗣️

[hollow zinc]

Mine is 230g.

[pure crown]

Nice !

[cyan wagon]

i think ill stick to giving an opinion on a product iv actually touched.

[pure crown]

Are you sponsored by skolvr ?

[cyan wagon]

nope

[pure crown]

Hm

[plucky ember]

Then stop talking

[ashen hull]

😂

[pure crown]

Then why are you defending it still when we proved all your points wrong ?

[cyan wagon]

ok child

[ashen hull]

But bro we're giving our opinion @cyan wagon

You don't have to agree with it

[plucky ember]

Give your opinion once then accept other opinions it's not that hard

[pure crown]

Okay old man on discord

[ashen hull]

let alone hate on it

[ashen hull]

PREACH bro

[fervent void]

You are loosing your time

[plucky ember]

It's not hard to be open to opinions and be nice to others.

[ashen hull]

I'm not even saying the Skol is shit. I'm just saying for what like £12 extra you can get the raidr which as home boy said is 1 pound lighter 😂

[cyan wagon]

the guy who told me to shut up is now telling me how to be nice to others.

[pure crown]

You are sponsored trying to get everyone to buy stuff from skolvr. You already got warned one time you are so full of yourself

[hollow zinc]

Actually that's with the full front grip. The main product I recommend for Tabor (UltiStock Classic with forearm brace) is 160g

[ashen hull]

You see ^^^

[fervent void]

In few seconds he will tag a mod because 😭

[cyan wagon]

thats 100% true. price point is a big deal to some people. i expect the raidr to be a quality stock as well. i just disagree about complaining about 1 pound difference.

[plucky ember]

Thank you for your opinion I actually think that looks cool

[ashen hull]

1lb is a LOT in a gun stock dude...

[pure crown]

It is a big difference for a vr gunstock

[cyan wagon]

to some people yes, i didnt have an issue with it

[pure crown]

See this is what i call a high quality gunstock

[pure crown]

Okay but most people would rather have a gunstock that doesnt weight 1KG

[ashen hull]

When we're talking about gun stocks you have to be specific, weight really matters

[fervent void]

I don’t see links or other thing so continue to play with you toilet paper gunstock and stay calm ,child

[pure crown]

You got warned stop crying

The mod removed the links

Stop giving bias opinions its so cringe

[ashen hull]

😂

[plucky ember]

You can still give honest opinions even when you're sponsored

[fervent void]

Grow and wash you 😛 when you speak with me

[plucky ember]

You can be honest.

[ashen hull]

^

[pure crown]

I've been here since december and i havent seen you recommend anything but skolvr

[ashen hull]

Agreed

[pure crown]

Yeah but he decides to lie to make a few extra bucks

[ashen hull]

😭

[fervent void]

👦

[pure crown]

Oh sorry im not an old man that does nothing with his life all day and has to resort to recommending gunstocks to kids

Womp womp

[ashen hull]

Why can't we just all get along lol

[fervent void]

https://tenor.com/view/的9-gif-27299608

[ashen hull]

I suppose when money is involved, people tend to get... upset

[cyan wagon]

im not sponored by skolvr, and gave my honest initial opinion. the gunstock is a solid product, its extremely durable, and over-engineered. it is heavier than others, and all i would say is...weight does matter in relation to construction. if you are actually young, you'll learn that over time. material technology is in a drastic upcurve though, and thats important. however, 3d printing is at the center of the majority of those discoveries

[pure crown]

I dont want to waste my time so stop arguing. You can keep acting like a kid and recommending overpriced gunstocks and i can relax and not deal with slow people

[ashen hull]

Nice opinion dude, that's more like it!

Thanks for sharing

[plucky ember]

^

[pure crown]

^

[plucky ember]

Simple as that

[ashen hull]

Now let me tell you why you're fucking wrong

Just kidding 😂

[cyan wagon]

how much does the protube weigh?

[ashen hull]

I must admit, I was laughing writing that haha

magtube weights 656g for chrome, 543g for carbon

[plucky ember]

"If you are actually young" 💀

[pure crown]

I was talking about magtube not protube

But doesnt matter lets all just relax

[ashen hull]

I second that

[cyan wagon]

very minor difference tbh

not a hill id die on

[pure crown]

I will give an honest review on the raidr when it arrives in about 1 week and a half

[cyan wagon]

you and a lot of others lol 😄

[pure crown]

Yeah haha

[cyan wagon]

so the things the tomahawk really impressed me with, is the ball bearings used, and the magnet used

[ashen hull]

@cyan wagon Correct me if I'm wrong, please do... I feel like you would like nothing more than for the Raidr to suck.

[cyan wagon]

magentic connections if under-engineered. are a huge issue. the magnet used is very powerful

[pure crown]

Hm i havent tried but ill take your word for it !

[ashen hull]

^

[cyan wagon]

i hope it is successful as i hope for that due to CWS being successful. why you want to project how i feel about other gunstocks that iv never touched, is beyond me.

[ashen hull]

The magnets in my 7thvr gunstock literally shake depending on how I'm holding it the entire stock. It's easy asf to pull apart but strong

strong magnets aren't bad

[cyan wagon]

what do you mean shake?

[ashen hull]

I'm exadurating but it's not a bad thing

[cyan wagon]

i said strong magnets are good? did you think i meant theyre bad?

[ashen hull]

This makes it come across as negative.

[cyan wagon]

read dude.....i used punctuation for a reason.

magnetic connections if under-designed/engineered, are a huge issue. the magnet used(in tomahawk) is very powerful

[ashen hull]

What if I'm dyslexic?

[cyan wagon]

then you need to find help outside of a videogame discord

[pure crown]

Bro what 😭

[ashen hull]

This guys an asshole ngl

But anyway

IMO Skol does suck

[cyan wagon]

guess im an asshole for recommended help that isnt me, in relation to a reading disorder.

[pure crown]

Let me correct you. A vr video games making franchise discord server 🤓

[cyan wagon]

hehe ty.

[pure crown]

No worries lol

[pure crown]

I think the same

Apart from the materials used and price + the owner sending videos of gunstocks to people on dms i think its fine

[ashen hull]

Yeah that was odd

[cyan wagon]

do you own one? tomahawk or butcher?

[ashen hull]

Nope, don't need to own a tesla to think they're shit

[cyan wagon]

im asking dellux, not you pumba.

[ashen hull]

that's where opinions come into play. That applies for us both

[modern grove]

No it only resets movement settings and height cal

[pure crown]

I've seen a lot of people complaining about the calibration for skolvr as well. I dont want to get an overpriced product

I would gladly pay 220 euros for a magtube knowing it will be decent

But i dont see myself playing that much vr so i dont

[ashen hull]

I really hope they add a pre-made config for the raidr

[cyan wagon]

so far, i havent had calibration issues. spent about an hour last night on that

[pure crown]

Agreed

[ashen hull]

Imaging everything just works perfectly

[pure crown]

Scroll up a while and you'll see

[cyan wagon]

???

[pure crown]

You will see people complaining about calibration on the butcher and tomahawk

[cyan wagon]

i did the calibrating myself.

worked fine

[pure crown]

Thats good for you. That doesnt mean everyone else will be the same

[nocturne lotus]

Would actually be pretty hard since it's not a fixed stock...

[cyan wagon]

sure, but it does mean it could be a them issue not a stock issue

[pure crown]

Ohh yeah

[pure crown]

Im still stuck if thats a stock issue

[cyan wagon]

yea for sure

[pure crown]

Because a lot of people cant do it right

But alright

[cyan wagon]

well a lot of people ask really dumb questions in #❓・questions as well 😄

[pure crown]

Yeah i get that

[cyan wagon]

once i get some stuff tweaked, ill write a formal review

[pure crown]

Okay

[wanton granite]

Wait, is shipping for the raidr also starting for the EU on Monday?

[nocturne lotus]

Yupp

[ashen hull]

Ja

[wanton granite]

let's go 😤😤

shit gonna be amazing

1 week shipping no?

[nocturne lotus]

Give or take, mostly take.
You'll get a tracking number as soon as it leaves the 3PL

[flint copper]

balkan edition

[pure crown]

W

[rough bison]

I'm a us citizen and just wanna check when the stock will be sent I ordered mine yesterday

[hollow zinc]

Yeah the RaidR is legit folks. Those grip attachments have full adjustability. You need adjustments for Tabor and basically every new game that comes out that a has you swapping weapons all the time. You need to be able to calibrate the gunstock to the game and your body together and then do gunstock calibration in game.

If you're considering a gunstock without full adjustability, it better be less than. 40 bucks.

[rugged berry]

My biggest sort of concern with the raidr is that it wouldn't be super easy or quick to adjust in raid, like if you switch from a smg to a rifle and vice versa, or you get add a foregrip, especially the canted one where your hands will have to be offset. With any other foregrip you seem to kinda of lack vertical control, so your hand will be gripping the foregrip but it's going to be in the place of the handguard, causing your gun to aim up

[tough spruce]

Any Tomahawk Gunstock user here?

[pure crown]

@cyan wagon and @fervent void Are im pretty sure

[nocturne lotus]

Most of the times you don't need to, it's pretty forgiving.

#🔫・vr-gunstock-chat message

[onyx hazel]

is there a universal gunstock setting that allows for usage of all attachments without it being offset?

[glad scroll]

That would be very useful

[onyx hazel]

yea but for now ig i'll just throw away attachments

[buoyant stratus]

I have an I stock and I can’t reload a Glock how do I fix it?

[onyx hazel]

really sucks

[onyx hazel]

detach your hand and reload it

[buoyant stratus]

Damn

[royal wagon]

no

the gun socket geometry changes when you grab in different positions

[soft burrow]

How long will the gunstock be shipped to my house?

[pure crown]

Which one

[soft burrow]

Raidr

[pure crown]

Where are you from ?

[soft burrow]

Us

[pure crown]

Im not sure

Ask in the discord

[soft burrow]

Witch channel?

[pure crown]

Oh yeah you are in the us

[soft burrow]

?

[pure crown]

Im not sure i didnt order from got website i ordered from mamut vr

[north nest]

is the but stock add on extend from the main stock or it need to be replace the normal one?

[cyan wagon]

Yes. I just got it in. So limited knowledge base.

[nocturne lotus]

You replace the standard 200mm tube with a 350mm.

[coral venture]

any clue when orders will be shipped out i ordered mine from ghost of tabor website

[rugged berry]

Monday/Tuesday

#📈・socials message

[fleet crane]

Hello everyone ! I need a quick answer, wich gimunstock should i get for my quest 2, it would be my first one, i do 't want a cheap bad one, but not one that'll cost me 300 bucks, any idea???

Please 😭🙏🏼🙏🏼🙏🏼

[left plover]

protube

[fleet crane]

Ok, is there any model better than an other?

[spark lintel]

its like 200 bucks

[fleet crane]

I was asking justbin case

[pure crown]

Check out 7thvr. they have a snapping design like the raidr. If you dont like it get the raidr

[fleet crane]

I'm not an expert but i'll take a look thank you!

[wheat aurora]

Should I use pvc pipe for a gunstock and heat a pipe until its moldable with your hands and place the controller in to make the fit?

[fleet crane]

What is the force tube , like what does it have more than the protube

[spark lintel]

did you ever fix this?

[pure crown]

Yeah of course

[pure crown]

They are just expensive gunstocks that are overkill for games like ghost of tabor

Plus one thing about 7thvr you can change the gunstock to any color you want for 10 gbp extra

And also add an engraving for the same amount

[fleet crane]

I don't find the 7thvr site?

[pure crown]

You need a link ?

[vernal arch]

yeah just had to tighten the screw

[spark lintel]

i'm assuming it's the one that allows the cup to move, but then i can't really adjust it anymore

[fleet crane]

Wgat are those made of?

[pure crown]

3D printed out of decent filament that wont break easy

[fleet crane]

Bro , i should print it myself if it's 3d printed

[pure crown]

The big one weights 180 grams without controllers

[pure crown]

Up to you

[pure crown]

Im not sure if you can get a snapping design and same quality magnets for cheaper tho

[vernal arch]

no take the cup off the stock then screw the one inside of the magnet all the way

[drowsy panther]

Can someone tell me if I buy the DLC content. do I always have access to it or once I lise it in a mission is it gone?

[pure crown]

What

[drowsy panther]

If I buy the addon packs , and I use them in a mission are they gone for good or will I be able to purches the wepon in the market.

[pure crown]

You have them forever even after wipe haha don’t worry

[drowsy panther]

thank you D3l Appreciate it.

[pure crown]

Happy to help !

[proper pewter]

Is the stock alignment on SMGs messed for the CX8 for anyone else?

I can't put a foregip on it or I'm aiming at the ceiling

[wild ruin]

Did you inspect the magnets? If either are loose this wiggle could occur. Otherwise could be a crack somewhere which is covered by warranty.

Feel free to reach out to support on the website https://www.protubevr.com/en/content/6-customer-support

(sorry, reading through stuff and when clicking on a reply to see source hard to see what day its from so many messages this channel haha)

[pure crown]

Hey Jon, i was wondering what the difference between magtube and protube is

[wild ruin]

The ForceTube refers to the force feedback kick and rumble module that replaces the shoulder support of the MagTube. In supported games, it will kick and rumble when you fire a gun.

[wild ruin]

There is no ProTube. Only MagTube. ProTubeVR is the brand name. MagTube is the product

[pure crown]

Understood. I confused them haha

[wild ruin]

Go browse our site you'll see everything available, and there's no Protube

[pure crown]

I was interested in the magtube fully carbon

[wild ruin]

All information is on the product pages

[pure crown]

Do you guys have an EU site for free or cheaper shipping to people in Europe

[wild ruin]

We ship from France.

[pure crown]

Okay

[wild ruin]

All orders over 100 euros are free shipping.

[pure crown]

Understood

If i need something more overkill then the raidr ill make sure to check it out

[wild ruin]

MagTube is highly adjustable and its modular design allows users to disassemble and reassemble however they like. We also offer spare parts so people can add additional tubes, connectors, mounting points, etc. to create the perfect setup. So you get a lot for what you pay than just something restricted to one layout

[rugged berry]

Gone for good until you unlock the trader level for the base game equivalent gun

So for example with the uwu pack, you can't get another skinned altyn until minty 5, which is when you get the normal altyn

Then you can buy the uwu altyn from the market

[wild ruin]

Example of some things you can do with spare parts or other connectors that fit on 18mm tubing

[jade ridge]

whats a good budget stock

[pure crown]

7thvr.com

[pure crown]

Looks good

[rugged berry]

I wish I could actually afford it 😒

[pure crown]

Might as well save up

Get a cheap decent quality one first and save up in my opinion

[rugged berry]

that's not something I can do if I have no actual income and just birthday money, and my parents don't let me spend very much at all, probably for good reason

[pure crown]

Which vr do you have ?

I can recommend you gunstocks that aren’t expensive but good quality

[rugged berry]

The quest 3, me, my brother, and parents split the price and we were upgrading from the quest 1 that we got for Christmas in 2019 and has been busted for a year

[pure crown]

Are you looking for a one handed gunstock or a full one ?

[rugged berry]

I think generally a full one just scared of the adaptability, or lack thereof, of one

But I lurk and talk here enough I know the options

At least fairly well

7th, ultistock, raidr, tomahawk/butcher, protube, anything else in the pins that I haven't listed

[pure crown]

For your budget i would recommend 7th

Butcher is overpriced and heavy for such a small gunstock

[pure crown]

Also if you have a bit more to spend you could get it in a custom color and add an engraving of your choice on it

Custom color is 10 gbp extra and same price for engravings

[floral echo]

hi good afternoon! magtube.

[royal wagon]

magtube

[floral echo]

sup fellow magtube advocate. it's literally the answer to everything in this channel. just /topic it and then mute everyone. the end.

@royal wagon are you using the Bigscreen Audio strap or did you fashion some sort of over the ear thing from another HMD? i need to replace my G2 soon and been looking at the Bigscreen

[pure crown]

Imagine someone saying the same about another gunstock 🎆

[floral echo]

yeah imagine. imagine being WRONG on the internet.

[pure crown]

You won’t be wrong tho

[floral echo]

no i get it, they would be

[pure crown]

All people have different preferences and likings

[floral echo]

buy once cry once

magtube can adapt to all sorts of preferences and likings

[pure crown]

Too overkill for a game like got

[floral echo]

i am interested to see how the tabor gunstocks work out review wise

ah well i play more than just GoT with mine but

[royal wagon]

i have the BSB audio strap, both a preprod and a prod one (they just started shipping)

its ok if you want something easy to use

[pure crown]

Yeah i will post an honest review when i get my raidr

[royal wagon]

im using the index strap with some adapters, using the speakers too with a better DAC, super super good

[floral echo]

sweet. i think that's the only thing holding me back, is what to do with audio, so this helps. i already got base stations and index controllers

wonder if i could re-use my G2 strap since that thing will likely be a paperweight (barring anyone open sourcing some sort of openxr plugin)

g2 strap and index strap v similar. valve helped hp iirc

[royal wagon]

kind of

[floral echo]

g2 has that weird velcro

[royal wagon]

they use different connectors. put some work in and it will work. otherwise buy an index strap from tundra

[floral echo]

yee

[mortal seal]

So me gunstock has those magnet covers for my quest 2 controllers. But whenever I snap them back into the actual stock, my controllers lose tracking, anyone know a fix? Pls help

[floral echo]

could model/print some sort of adapter

[royal wagon]

there ya go

[pure crown]

Which gunstock ?

[floral echo]

are you sure that hand tracking isn't being activated via the "Tap" feature

[pure crown]

Yeah that happens often with quest i just turned it off

[floral echo]

i had a similar issue (prior to seeing the light and getting a magtube for my Q3)

so try turning all that crap off

[mortal seal]

Do you have to turn that on/off in settings, but it does it on pc too

[pure crown]

I’ve never seen a review for that gunstock im not sure

[mortal seal]

Ok

[floral echo]

hard to tell, but it doesn't look like the rings are blocked by anything so either handtracking is being enabled somehow (double check by waving your hands around when it happens) or it's at a bad angle to where the Q2 camera's can't see it

especially if you're ADS'n

[pure crown]

I second that

[mortal seal]

Ok thanks guys

[floral echo]

even a violent "click" of a magnet can trigger it

if that doesn't work invest $1800 in a bigscreen beyond HMD and all the other crap you need for it. gg ez

(seriously tho base station tracking is GOATed)

[royal wagon]

disable hand trakcing and also try the new aim jank fix

[mortal seal]

Yeah they are pretty strong magnets and they pull the controllers in pretty hard

[floral echo]

this ^^ disable hand tracking all together, not just the 'tap to enable'

[royal wagon]

the aim jank fix was made to get around the quests tracking deadzones from having your front controller obscured by your rear controller

[pure crown]

Quest pro controllers are a pretty good cheap alternative in my opinion

[floral echo]

ah so that's what that is

never used 'em but can you pair them with other HMDs?

i have G2, Vive Pro (modded), Q2 and Q3 and VP but don't h8 me cuz u 8nt me

[pure crown]

You could pair them with Q2 and Q3 i believe

[floral echo]

i still use my vive pro all the time. i hate LCD screens, hence my bigscreen beyond infactuation

[pure crown]

I have a Q3 im thinking of getting base stations and index controllers

[floral echo]

to pair the controllers with the Q3 you need to get some sort of tracking device for the PC, and can't use native quest games with it iirc. been a while since i've looked at it tho

[pure crown]

I’ve heard it works that’s why haha

[lethal slate]

I got vive pro old old old

Decently set up base stations

[royal wagon]

Just upgrade to an index

Combining playspaces is a major pita

[pure crown]

Index is old software

[royal wagon]

Index is old hardware that is superior to the q3 in every way

[pure crown]

No

[royal wagon]

If you’ve got more money get the beyond

[warped portal]

Nah I say index is better

[pure crown]

Quest 3 even has better resolution what are you taking about

[warped portal]

Because you can always upgrade your pc so ping and internet will get better

[royal wagon]

But you don’t get to use it because you have to stream off the PC

[warped portal]

Quest 3 is overpriced and sucks

[pure crown]

Huh

[pure crown]

What are you yapping about

[royal wagon]

Compression sucks all of the quality out od the q3

If you could hook up a DisplayPort cable this would be a different conversation

[pure crown]

Index is old and has a lot of issues

[royal wagon]

Not really

[pure crown]

Yes really

5 years

[pure crown]

It’s 500$ and has better resolution and hardware then the index

That’s not my opinion it’s a fact you can search up on google

[open sail]

👆🏻🤓

[pure crown]

Mad cuz you spent all your money on a vr set up 😂

[floral echo]

I will say that AV1 encoding + virtual desktop + wifi 6e is insanely good. And I say that as a cable HMD enjoyer.

But ya need a 40 series for AV1

[lethal dragon]

Best entry level gunstock for the quest 2?

[royal wagon]

I’ve used both and many more have as well

Shit audio, shit mic, shit comfort, bad tracking, mega compression. It’s a big downgrade unless you want standalone

And if you want quality you don’t want standalone

[pure crown]

Great audio and mic must have been a defect

Tracking is good

I don’t notice any compression

it’s an upgrade actually

I have friends who have switched from index to quest 3 because of the quality

[royal wagon]

Now I know you are trolling

Nobody considers the q3 audio or mic to be good

Tracking is not great, lots of deadzones especially with shooters

[pure crown]

It’s decent not shit

[pure crown]

I don’t notice it

[royal wagon]

It’s shit

CWS had to make a fix

[pure crown]

You are bias to pcvr dedicated headsets

[royal wagon]

I am bias to quality VR

If there’s something better I use it

[pure crown]

No 😭

[royal wagon]

Why would I be bias to PCVR

If there’s something better I use it

[pure crown]

Buy pro controller wow fixed !

[royal wagon]

I bought a q3, and returned it

Yeah, pro controllers still aren’t as good as lighthouse tracking

[pure crown]

Lighthouse tracking can mess up too and when it does it’s a long process to fix that

[royal wagon]

???

[pure crown]

???

Have you not seen the problems with index based stations

[royal wagon]

That’s such a generalized statement you didn’t say anything

[pure crown]

No it is not.

It can mess up by a blanket being put over it 😂

[royal wagon]

You should read what your write bro lol

[fervent blaze]

yo i just got a new vr meta quest 3 and i want a really good stock for this game

[royal wagon]

And maybe learn about sentence components

[pure crown]

I am

[royal wagon]

“Light house can mess up too and it takes a long time to fix it” is lacking a lot of specifics for a full sentence

[pure crown]

I would rather spend 800 euros on a pcvr set up that is almost identical to your 1800$ set up

[lunar girder]

u want DIY kr money gun sticks?

[royal wagon]

I would rather spend 1800 on a better setup

[floral echo]

Lighthouse tracking can mess up? Lol

LASERS MAN

[royal wagon]

I hope you aren’t implying the quest 3 is remotely close to a beyond

[pure crown]

Quality is better on the big screen beyond obviously but useless for vr shooters

[royal wagon]

Because lmao

The quest 3 doesn’t even play the same sport

[fervent blaze]

what?

[floral echo]

Ok yeah trolling at this point lol

I have a feeling they might be new to VR as a whole which is fine

[royal wagon]

Why do you even care

[floral echo]

One day they’ll get it

[pure crown]

I’ve never seen one person play ghost of tabor max resolution on the bigscreen beyond

[royal wagon]

You aren’t looking lol

I never said anything about price. Now you are just defensive and sad

You just make shit up lol and it’s really obvious now

[pure crown]

I never got defensive or sad your points are just invalid

[royal wagon]

lol you must be a very sad man

Well, child

Definitely not a man

Hahaha it makes so much sense now

lol

[pure crown]

lol

[lunar girder]

do you want one that DIY or one that costs money

[royal wagon]

I hope you remember this when you grow up

[pure crown]

I won’t because i actually have goals in life unlike some people

[royal wagon]

lol

That part too

Write it down and read it in like, 10 years

[pure crown]

I never meant to make you insecure or sad I apologise if i have. I only wanted a debate which you clearly are bias about from the start

[royal wagon]

Right right

[pure crown]

I don’t wish any bad on you i wish you live a good life

[royal wagon]

That’s different than what you were just saying

[lethal dragon]

I’m sure this chat is meant to be about gunstocks?

[pure crown]

Yes right. I never wanted to get to insulting but you started

[pure crown]

😭Yes

[royal wagon]

Bro we can all read what is happening here

[pure crown]

Educate me on what’s happening

[royal wagon]

Go back and read your posts

[pure crown]

Yes i was debating

Every point ive said is correct you can fact check it

I will remove the messages above as this is gunstock chat not debate chat. I suggest you do the same

[royal wagon]

[pure crown]

?

[fervent blaze]

one that costs money, like a good one with good reviews on like amazon

[pure crown]

Magtube,raidr or ultistock

Also a few more which you can check in pinned messages

[fervent blaze]

ok

[rugged berry]

please be satire please 🙏

[pure crown]

I’ve searched it up you can fact check it 🔥

This has happened to people

I’m not saying it will happen to everyone but it’s a known issue in the pcvr community

[rugged berry]

No shit it would mess up the tracking

If you were using a quest and threw a blanket on your head it would mess that up too

[pure crown]

No i mean permanently mess up the base station

It has happened you can search it up i was surprised too

[rugged berry]

If price is not a factor pcvr is going to be preferred by most people I think, especially wireless pcvr

But price is a factor and preferences is a factor, can we please not have the console wars equivalent in VR

[pure crown]

Yes i have already apologised and removed any messages that people would find hurtful

But the other person clearly doesn’t want to

Anyway

[pure crown]

How can you achieve wireless pcvr other than wireless vive

[rugged berry]

I figured there was something other than the vive dongle thing

[pure crown]

Yeah but i can’t find anything

[lethal dragon]

Have they started shipping the Raidr stocks

[pure crown]

Shipping starts Monday/Tuesday

[lethal dragon]

Looks like the sort of stock I want, just don’t wait to be waiting a while for it that’s all

[pure crown]

I’ve been waiting since January 6th. You need some patience in life to achieve your goals haha

If it’s what you’re looking for i suggest buying now because there is a possibility of stock running out. At least that’s my prediction

[lunar girder]

done get a gunstock where you pur tyour controller on top though

[pure crown]

<@&1162175624228642816>

[fervent blaze]

ok ty

[pure crown]

I apologise for the tag but there was a useless argument a bit above in this chat and i think it will be best if all hurtful messages are removed in my opinion i have already apologised and removed any hurtful messages like a man

[rugged berry]

Huh?

[pure crown]

👍

[pure crown]

Interesting grammar

[rugged berry]

Is he saying to get a stock where the controllers attach to the bottom?

Because that's really bad advice

[pure crown]

I don’t know bro

I’ll translate

[rugged berry]

@lunar girder can you reword this

[pure crown]

Done get a gunstock where you put your controller on top

[left plover]

people using the protube do u use physical gunstock option?

[pure crown]

I fixed it and i still can’t understand 😭

[rugged berry]

Don't get a stock where the controller is on top, as in don't get a stock like every recommended stock out there

Get one that blocks tracking

[pure crown]

!!!!

😂

[robust tartan]

What Gunstock should i buy??

[earnest bough]

Hey, I’m having trouble with the calibration on my new stock. The game isn’t letting me grip the gun with the left controller during calibration. Anyone know if it’s meant to be that way or if it’s a glitch

[royal wagon]

Meant to be that way, check pins for a detailed step by step guide and video

[unborn elbow]

I get mine tomorrow hoe much will it change the game for UT

[safe fractal]

Didn’t even last a month, haven’t thrown, hit or misused the gunstock.

[warm bronze]

Might be able to solder it together if you have one

They're like $20 on amazon

[safe fractal]

Rather spend 33$ for the replacement tbh, too shitty of a print to even attempt getting a sturdy solder

[warm bronze]

Up to you

[royal wagon]

email their support, they will take care of you

[spark sinew]

are there any universal gunstocks that can ship to australia?

[dry merlin]

We do. Probably alot of others aswell

[brisk elm]

After spending too much money, and constantly tripping , hitting my toes and getting killed trying to find my stock on my body, I ended up with this.

[pure crown]

How is a gunstock hitting your toes ?

[brisk elm]

It's magnetic, so the part that is on my sling and dangles hits the floor, or my toes occasionally, when I kneel down.

[pure crown]

Damn

[pure crown]

Are you happy with that gunstock you are showing here ?

[brisk elm]

VERY much, on every game I have used it.

The butt stock isn't necessary for precision aiming, as long as the two controllers stay on the same axis.

[pure crown]

Well if your happy with it thats good

Did you 3d print it ?

[brisk elm]

Actually it's the parts from the Kobra maglock that I use here.

[upper kernel]

I made my own out of pvc pipes 😂

[pure crown]

Looks nice

[mental lance]

No sling, no hassle🙌

[brisk elm]

All you need is a way to magnetically lock the two controllers at about 20cm apart.

That way you have free hands for looting and handling, and a steady aim on a snap for rifles.

That design is so comfortable that I don't remove them for all of my vr games.

[mental lance]

I made that design a year and a half ago. And I love it, bro.

[foggy flower]

I made my own design too up to 15 hours of in-game testing.
So far results have been incredible, guns lining up perfectly and a massive accuracy increase!

For those unsure as I was if a stock will improve you aim and your game. It will but make sure you take you time and do your own research and choose the one that's right for you.

[mental lance]

You def got talent, brother💪

[plucky orbit]

i might 3D print a custom gunstock for my rift

my 3D printer has been playing up recently though so idk

[junior totem]

I couldn't find any good 3d printed stocks

There are definitely some, but no really good ones

Or ones that require other parts

[pure crown]

Ask @foggy flower

[foggy flower]

Thank you, thank very kind of you. I need to change the M4 adjustable stick to a more lightweight height length and angle adjustable. Want to reenforce the cup bar couplers. Since that pic I have managed to incorporate hand straps into the design and have an idea of how to adapt it for quest 3 controllers.

It's a labour of love and still a work in progress, but it getting closer each day.

I am still getting a raider there's no doubt, just too impatient.

[pure crown]

I think his gunstock looks good

[pure crown]

Do you sell that 3D model

[junior totem]

Km not trying to buys one, I own a printer

[pure crown]

Yes he prints them

I might be wrong but I think so

[foggy flower]

I have not tested that many files I did see pumba put a link on the other day for a minimalist split stock similar to mine and of the same style as the 7thvr.
I had a good seems sound design. Becarful choosing magnet sizes the other day.

[junior totem]

Ok, do you have the link?

[foggy flower]

I can help out people in the group that don't have a printer. I have the equipment and experience.
Not something I would actively look at doing.

Happy to help out anyone in UK looking for help.
If someone in the USA would also be happy to help out it could only benefit.

[pure crown]

Okay. Have you ordered the raidr as well ?

[foggy flower]

Just getting ready to head out but can find it later and fire it over to you.

[junior totem]

K

[foggy flower]

Sadly not yet, put simply I can't afford it right now, last 2onths I have put 20 aside for my pay, so at this rate I won't have 1 for at least another 2 months.

That's not even including the backlog and "whiskey breaks" you know who you are.🤣

[pure crown]

Yeah i get it

They start finally shipping Monday/Tuesday

So it’s a shame you can’t get it yet

[foggy flower]

Lack of funds, often helps bring out many people's creative sides.

I just want at some point to have one of those raiders that's bar mount with both angled and rotation in 1 fluent movement is a work of art from a design perspective.

[pure crown]

I will give you an honest review once i have mine

[foggy flower]

Yet, was the most important thing in that sentence. 🤣

[pure crown]

😭

I have ordered the 7thvr gunstock because it has a similar snapping design like the raidr and ill get used to it before my raidr arrives

[foggy flower]

I genuinely would love to hear. No hard feeling about the other day btw

[pure crown]

Yeah no hard feelings. I’m not a person who holds grudges dw

Did you notice that the graphics look better on quest after the new update because I certainly did

And performance also. I don’t notice any video compression when im using official meta link cable

[slim jay]

MONKE

[foggy flower]

I saw that pic, I was absolutely gutted for the dude. He was the guy in Scotland. They did ok by him offering replacement and full refund. Was impressed by that.

With that said first time seeing 1 up close was that pic.
I would have said poor layer adhesion like due to too lay nozzle temps. Material looked very thin at the top too I would inncrease thickness on the model there as it like a high stress point.

Please know no disrespect to 7thvr I'll meant if anything I would them to adapt and make better for their customers.

[pure crown]

I will review that as well it will come sooner then my raidr

It is really light tho that’s what i like about 3D printed gunstocks

I was leaning towards strong metal gunstocks for a while but wanted to try the 7th

[pure crown]

I agree with what you are saying. I know you didn’t mean any disrespect dw

[pure crown]

You should try and 3D print this gunstock it looks promising ! The file for it is in the description https://youtu.be/S_u-pQs81Bc?si=pbuMDuWxTRpiQ4lz

[wild ruin]

What rage said. That's covered by warranty we'll send you a free replacement ASAP 😄 https://www.protubevr.com/en/content/6-customer-support

[floral echo]

Good morning. Magtube.

[foggy flower]

Been hoping to bump into someone from protube.
Nice designs, your force feedback accessories really caught my eye. Would like to incorporate into my own stock.
Little on the expensive side for my budget. Considered making a version of stock kickback with the internals of an electric blowback airsoft pistols mechanism.

Any chance you guys would conser selling just the internals?

[wild ruin]

No clue on that, you could contact [e-mail] to find out

https://defense.protubevr.com/ you can see some other usage of those internals we offer here (photos etc. further down the page), although this is more offering a complete training solution than selling the internal parts

[pure crown]

https://www.thingiverse.com/thing:6289919

[junior totem]

Thx, I'll check it out

[nocturne lotus]

That concludes the assembly for the base set for this batch. Def worth a whisky!
Cheers!

[limpid swan]

lets gooooooo

i couldnt be more excited for next week

[swift crypt]

Lets GOOOOO!!!!!! Thank you and the team foe all the hard work and long nights. I dedicate my first lobby wipe to the MaMut team!!

Cheers my friend! 🍻

[foggy flower]

Does living I. The whiskey capital offer any advantages?🤣 Can one barter rare bottles single malt from their collection exchange for a raider?

Highly unlikely I know but you gotta try right?🤣🤣

[foggy flower]

What's in the glass?

[nocturne lotus]

Bowmore 15yr cherry cask.
Peaty, just the way I like it 😄

[nocturne lotus]

Haha, don't tempt me

[foggy flower]

Well if your ever in Scotland swing past, I can show you some cool places and have a dram or 2 my friend.
Enjoy the well earned rest buddy.

[crystal aurora]

Might be a dumb question here. But how often are the waves of raidrs going to be sent out? I'm just curious as to the time frame for those of us who ordered recently.

[nocturne lotus]

I'll hold you to that! 😃

[nocturne lotus]

To be honest, I don't know.
It's quite a load on both our and CWS side, but it should just be a matter of days.

[crystal aurora]

Oh hell, that's a lot sooner than I had expected! I appreciate it!

[nocturne lotus]

It should be pretty streamlined.

[nocturne lotus]

For the send outs, I must say, Shipping, that's a different kind of monster

[crystal aurora]

@nocturne lotus Yea no kidding. I ordered a Protube (outrageously priced) right before i saw the raidr. It's currently lost in shipping and I'm in a dispute trying to get a refund. lmao.

[nocturne lotus]

Ah shit... Yeah... Freight companies...

[crystal aurora]

Yea, pains in the ass.

[crystal aurora]

What company have you guys decided to go through?

[lofty gorge]

DHL always does me good

[foggy flower]

Hope you do buddy, got some lovely unique. Luck enough to have a few cask strength 18yo singles a(all about who you know😉)blow you head off. Incredibly rich caramel like flavour.

Genuine offer buddy value all the work you and your team have done. As I am sure many in the community feel.

[lofty gorge]

facts!!! i love my wasp!!!!!

[crystal aurora]

DHL is what screwed me lmao. So far they've had the worst customer service I've ever dealt with.

[lofty gorge]

rippp yea theyre who i would use to send motors and such and never had an issue, has been a couple years tho since i havent shipped international in a minute

[warm jewel]

It’s a joke don’t let it

Go over your head ik what he meant

[nocturne lotus]

Since DHL decided that they don't like small packages and upped the cost like crazy, we opted out to avoid price raise (and more or less always extra costs for the customers in terms of handling/toll).
We do airmail by default, not super fast, but reliable.

Not that DHL isn't reliable, they're solid, but just too expensive right now

[foggy flower]

@junior totem sorry for the delay at work just now this the link I was talking about

[vagrant sparrow]

wait the raidr is real?!?! i didn just spend 100 euros for an order number??? 😭

[nocturne lotus]

Hey, you prob got the best order number, don't be ungrateful 😄

[vagrant sparrow]

🙏 ordered within first few hours of it being announced so i hope so

[nocturne lotus]

First come, first serve.
You should get a mail early

[vagrant sparrow]

😭 cant wait

[nocturne lotus]

Hehe, solid damn stuff Fog!

[lofty gorge]

it issss, ZERO FLEXING. Legit everything else ive tried eventually gets stress cracks and flexes...not this badboy!!!! Litterally changed up the gunstock game with it.

im hard on my stuff lol

[nocturne lotus]

Built like a tank!
Kind of the weight of a tank too, but hey, heft need solid stuff 😄

[lofty gorge]

yea i honestly like the heft and dont even notice now, made it more immersive, cause, guns ARENT usually feather light lol

[remote jay]

did you send out emails for preorders? Also purchased in the first few days but did not get anything.

[nocturne lotus]

Depends on where you placed the order.
By the sound of it, you placed your order on GoT shop, we have no insight in that, but you should get your confirmation when your order is shipped, I think.

[steep orbit]

Congrats! 🥳🥳🥳

[chilly dragon]

Ok, that is awesome to hear, I have been worried since I placed the order that it didn't get entered into the system

I placed the order on the GoT shop

[nocturne lotus]

You should be fully safe, they know what they're doing, they have hands on.

[vagrant sparrow]

are they being shipped out at same time or is it not known? (the ones from the GoT store)

[nocturne lotus]

It might take a few days for Scotts father to plow through the order stock, please be patient about that. It's not an optimal situation.
We tried to prepare it as good as it gets for easy send out, but the booking usually takes more time than the actual packing.

Keep calm, the stuff will find its owner.

[pure crown]

Wait so the mamut vr raidr's will get shipped a few days faster possibly ?

Correct me if im wrong

[desert pine]

Which gunstock does TimelessVR use?

[nocturne lotus]

Might, but our freight isn't within country (usually) so the difference of when we send out, and when received is probably quite the same for customers from GoT/Mamut

[desert pine]

Which gunstock does TimelessVR use?

[pure crown]

Ty

[nocturne lotus]

Our 3PL is pretty high volume, so I expect all pre orders to be out on Tuesday latest, but free freight is free freight, it ain't the fastest around

[spark lintel]

the dr pepper gunstock

[pure crown]

Hopefully still 1 week like it says

[desert pine]

wow ur funny

[spark lintel]

thank you i'm really glad you think so

[nocturne lotus]

Kind of out of our hands, but, yeah, expected

[severe rock]

Did anybody get an email confirmation or anything for the Raidr? Bought it in the first day of annoucement, still yet to actual get anything to confirm it

[pure crown]

Okay

[nocturne lotus]

You should get a mail when it leaves the warehouse

[severe rock]

Ah perfect, cheers!

[pure crown]

<@&1162175624228642816> Spam link scammer

[jade meadow]

not affiliated with this guy at all but a good cheap vr gunstock, its called the Cgripvr gunstock its like 50 bucks, no tricky magnets just pull back and its good to go, theres an option for a "tabor mod" which helps line up the sights and its very nice. Most gun stocks the sights will be off center not with this one. I would give it a try as ive been using it for a couple of weeks and it feels amazing.

[pure crown]

You wrote a whole review

[jade meadow]

is there a problem?

i want to give a good recomendation for people who dont have 180 dollars to spend on a gunstock.

[pure crown]

Yeah kinda

Saying your not sponsored but typing all that is a bit sus

[snow crow]

Tbh you don’t need a stick to play

[pure crown]

You dont but its surely useful

[jade meadow]

?? even if i was how does it matter

[snow crow]

If you need a stock your most likely to be old enough to shake and have your own money

[pure crown]

Paid promotion or any kind of promotion is prohibited

[snow crow]

And cheap stocks are cheap for a reason

[jade meadow]

well thanks for you assuming but its not

just a good vr stock

[snow crow]

Not built to be sturdy and will most likely break easy

[stuck oxide]

Gunstock nice cause it feels cool to use. If anything it’s more of a hinderence.

[pure crown]

Yeah

[jade meadow]

sniping?

virutal gunstock sniping is impossible

[pure crown]

Its decent but for the money you can get better in my opinion

[stuck oxide]

Idk for sure cause I suffer from the tracking loss when using my stock

[jade meadow]

well we are all entitled to our opinions

[pure crown]

Agreed.

[stuck oxide]

Haven’t tried the new fix yet so maybe it’s possible to snipe now

From playing Onward I can say it’s useful, I definitely wouldn’t be able to snipe anyone free hand.

[pure crown]

You can yes. I can finally use bolt actions so im certain you can

[stuck oxide]

Real issue for me in this game isn’t necessarily the tracking issues but the calibration.

Can’t use half the guns with my stock so I swapped to virtual.

[pure crown]

Which gunstock do you use

[stuck oxide]

VRS MK3 I think

[jade meadow]

make sure you only have physical gunstock on when using the stock make sure virtual stock is off

i had the same issue and now its buttery

[pure crown]

I haven't heard of that send a picture of what it looks like

[stuck oxide]

Stock goes up and down and the secondary controller slides back and forth.

[jade meadow]

did you read what i said

have you made sure you didnt have virutal and phystical stock on at the same time

[stuck oxide]

Yes, I haven’t been doing that. Also haven’t tried the gunstock this update.

Did they fix the controller offset glitch as well?

When you grab a rifle with physical gunstock and your controller gets shifted up permanently?

[royal wagon]

It doesn’t go away when you let go of the rifle?

[pure crown]

They fixed a lot of bugs its best to check for yourself

[stuck oxide]

Alright, I didn’t see anything specific in the patch notes about it.

[stuck oxide]

No it was a permanent offset until the game is restarted.

[bronze flower]

Hey what's a good quest 2 gun stock?

[royal wagon]

There’s a new gunstock calibration resetting bug. Tap your watch with a gun in your hand and it resets

Been reported

[royal wagon]

You delete your savegame? Each time you grab an item with a calibration it reloads the offset

So if it doesn’t change it might not have valid data for the “neutral” position

[bronze flower]

?

[royal wagon]

Magtube

[steep acorn]

Less than 7 dollars

[brisk summit]

I need help

I need a gunstock but I’m at a budget

[pure crown]

Budget and country

[brisk summit]

Kuwait 90 dollars

[pure crown]

7thvr.com or raidr.

[brisk summit]

What’s ?

Can you explain I’m not really a expert in gunstocks

[brisk summit]

Please

[foggy flower]

If it's for Tabor and you can afford it I would recommend the Raidr. Officially endorsed and made for the game I would rather put my money towards an item that gives back to the company that made the game I wanna support.

[pure crown]

If you don't have enough for the raidr 7thvr is a good alternative. It has the same snapping desing but is a bit lighter and 3d printed its also cheaper

[brisk summit]

Could I tell you what I’m looking for so me and you be on the same page?

[brisk summit]

I want a stock not heavy easy to move around with it like bandage rapping easy to reload with

[royal wagon]

The 2 I would recommend are the Magtube and the raidr, though I haven’t used the raidr yet

They are shipping soon and I was early in the order process so I’ll have one soon

[brisk summit]

I’ve seen a lot of people talking about the marine

Magtube

[royal wagon]

It’s the latest design from the first commercial gunstock company, many, many gunstock designs have followed their original design aspects

[brisk summit]

Magtube is out of my budget anyways

[iron moon]

any recomendtions for a cheap gunstock and where to buy? never used one so dont want to spends lots if money on one just yet

[brisk summit]

The RAIDR stock

Is it magnetic?

[royal wagon]

Yes. One magnet in the middle

[pure crown]

The 7th is your best bet

It snaps in 2 like the raidr but cheaper

Also good quality and weights about 180 grams

Plus one really strong magnet in the middle like the raidr

[brisk summit]

I want a stock with no magnet in the middle (no magnets) want a opened face grip

If possible

[foggy flower]

Love it man, if it works it works.

[iron moon]

any recomoended starter stocks on budget of £60?

[royal wagon]

You need to save more money and get a Magtube

[brisk summit]

About the raidr

[royal wagon]

You said you didn’t want a magnet in the middle

[brisk summit]

If that’s I have I’ll take it

How strong is the magnet?

[royal wagon]

For what

[pure crown]

You just said you didnt want a magnet so what is it last

The raidr and 7th both have really strong magnets. If you want a lighter 3d built get the 7th. If you are more into metal designs get the raidr

[pure crown]

Or if you want save up money and get a magtube like he said

[brisk summit]

I’ll get the raise

Raidr

[foggy flower]

For Tabor I recommend a split stock 110% game changer for me

[brisk summit]

Just how strong is the magnet

[royal wagon]

For raidr? I don’t think they’ve said and nobody has one yet

[pure crown]

No one knows from here

It's not released

[royal wagon]

Magtube has a patented magnet design and it’s like 80lbs pull force

[brisk summit]

When’s is it releasing?

[pure crown]

It starts shipping monday/tuesday

[royal wagon]

I think first orders go out next week

[brisk summit]

Ok

[brisk summit]

Does the raidr have a shoulder stand thingy

[pure crown]

If you get the buttstock attachment yes

[foggy flower]

Where are you based UK or usa

[brisk summit]

Anymore suggestions?

[pure crown]

Apart from the 7th no

[brisk summit]

Great

[brisk summit]

Non of those stocks ship to my country

[pure crown]

Let me ask them

[brisk summit]

Ok

[pure crown]

Go to 7thvr.com go to checkout and enter your shipping address

Then check if you can

Because im pretty sure they do

[brisk summit]

Ok

[iron moon]

Uk

[foggy flower]

I could make some something up for you if you have Something particular in mind

[iron moon]

Been looking at the 7thvr gunstock that delux was on abt

[nocturne lotus]

What country are we talking about?

[iron moon]

Where do you place second controller?

[pure crown]

This is the one handed edition where you free hand the second controller

[jade meadow]

bro didnt you get onto me for promoting? i didnt say a website or anything

[pure crown]

Huh

[iron moon]

Do they have a 2 handed one?

[pure crown]

People are asking me a question and i respond

[pure crown]

Yes.

[pure crown]

You can also add an engraving or a custom color to it im pretty sure. A friend of mine got a pink one it’s 10 gbp extra for every custom thing

[lethal sinew]

@brisk summit said he's from Kuwait early on.

[nocturne lotus]

Oh.
Yeah, that's not on our list.

[rugged berry]

you dont need to tell everyone this lol

[pure crown]

It’s a good thing to know

Check what they posted on socials haha 🤣

[rugged berry]

its a bit funny actually, a budget gunstock then a color or engraving for 10 bucks, when budget is usually best value for the money and cosmetics arent value

[foggy flower]

£10 that's steep, using current slicers it is very simple and only takes less than min.

Recent events have put me off 7thvr.

[pure crown]

Yeah some people like that stuff. It’s a good 3D print not a budget gunstock

[pure crown]

Could you explain what you wanted to say by recent events ?

[pure crown]

I don’t know much about the engraving but they have to order special filament for you for the color. Those 10£ pay for that basically

[foggy flower]

Well the cost is a big factor as we have all ready been over for me.

Out of all the stocks I looked it it did a good choice but after seeing their model up close and the quality issue.

The guy who was recommended to get one then received this.
Although they did refund and offer a replacement leaves definite doubts in the product.

[pure crown]

That was the guys fault because he used a wrong controller with it

[foggy flower]

I promise you it's very simple and any one who 3d prints would confirm.

You simply click on the model insert text and hit done.

[pure crown]

Plus he also didn’t ask if it would work with his quest 2 controller when the controller holders obviously indicated that it was quest 3

[foggy flower]

That was something I didn't quite get , from my experience but q2 and Q3 controller follows the same form as I have test both q2 and 3 in my own cup with zero issues

[pure crown]

Like i said before i am waiting for my one to arrive. I will review it.

[pure crown]

It’s some kind of issue i didn’t ask them about. They probably explained the cause to the guy

[rugged berry]

it doesnt leave any doubt it the product

thats a quest 3 mount

they sent him the wrong one/stopped selling quest 2 ones

[pure crown]

That’s what ive been trying to say thank you

I will compare it to my raidr as well once it arrives

[rugged berry]

that hole is for the IR light at the bottom of the quest 3 controller

[pure crown]

Yeah

[rugged berry]

and also different cup designs wil have differnet compatibility, that cup looks to go up pretty high

[pure crown]

He didn’t specify he was quest 2 so i think it’s his fault but what do i know right

[rugged berry]

if the quest 2 controller isn't as slim, it will break

[hallow swan]

i know this is a gunstock chat but can somone help me please? Im new and need help with loot spots and extraction points and in general i am bored im on quest 2

[pure crown]

Go to group finder

[hallow swan]

where is that

[rugged berry]

probably will have better luck in #🤝・pvp-groupfinder

[pure crown]

Above this chat.

[hallow swan]

its not there for me

[rugged berry]

#👥・roles

or go to "Channels & Roles" at the very top of the channel list

you might not have the channel selected

[tough spruce]

So... The Tomahawk Gunstock...
I'd love to get it but my only concern is... Looting.
I'm right handed, I shoot with my right hand and I loot with my right hand. I do not like looting with my left hand.

Or am I overthinking this?

[pure crown]

You aren’t overthinking don’t worry. For ghost of tabor you need a gunstock like the raidr where you can heal and grab stuff fast

[rugged berry]

i mean it shouldnt make a difference i dont think, itll be a little hefty

[pure crown]

Or if you really want to get the tomahawk it all comes down to personal preference

[tough spruce]

Hmmm I'm looking at Raidr and there's two different sets? Do I need both of them?

[ashen hull]

I spoke to them about this

On live support

well in that case

the guy a full refund

Any issues people get

they sort them out

They since removed their Q2 edition from the site as they're altering it. I think

Honestly tho

you can get away without a gun stock

so many people decimate without one that I know

But since I got mine I can get loads of kills hahah

me and @pure crown be tearing it up, we need another european plus one

[pure crown]

Preferably 16+

[ashen hull]

to make a trio, not now but tomorrow

and yes

@pure crown I will lower resolution tomorrow, laptop couldn't handle the same as the desktop. Obviously haha

[pure crown]

Yeah okay

[ashen hull]

Just to normal res, not like 1.5x

laptop sounded like it would take off 😂

[pure crown]

I didn’t really see a difference when i upgraded my resolution

[ashen hull]

Yeah it's not like upgrading res on desktop

[pure crown]

I saw people from the same distance. Only thing that changed a bit was buildings

[ashen hull]

Yeah, slightly sharper. You benefit lots on PC as you're further away

[pure crown]

Yh

[tall quiver]

Rate my diy gunstock, I made it from cardboard, tape, a stick and a rope for a sling

[rugged berry]

theres the base set, which is just the carbon fiber tube with the magnet and controller holders, then there is the buttstock attachment that is the actually buttstock part. if you want something the stabilize against your soldier, you need both

[proven tendon]

I just got this beauty from OlenVR today!

[foggy flower]

If it works and your happy with that's all that matters pal.

[ashen hull]

Looks great

[tough spruce]

Would it be better if it was over the controllers instead of under?

[vale panther]

i like protube

[tall quiver]

Yeah it's great, I've been using it for like 3 years and haven't let me down yet

[tall quiver]

nah cause then it would block the sensors

[foggy flower]

Think he was meaning other guys stock he bought

[tall quiver]

nah the other guy's pic has it over the controllers

[rugged berry]

for the guy with the index controllers, it doesnt matter because the stock isnt blocking sight from the base stations, or shouldnt be at least. for inside out tracking like the quest, it is better for the controllers to be above the stock

so the stock isnt in the way and also for some designs for the quest 2, it puts pressure on the rings which is the last thing you want

[stiff vessel]

Can I get a gunstock for like 20-30 USD or are they all $90?

[neat tiger]

Bro…

[tall quiver]

A thing of beauty aint it?

[rustic vortex]

Have the gun stocks been shipped out yet or are they still building them

[broken wedge]

Hey yall, im on quest 3 using a magtube and have found reloading difficult, my stock is in my way whenever trying to insert a new mag so ive resorted to dropping the stock to reload. Does anyone have any tips for how or if its even possible to reload while keeping my stock connected

[warm hinge]

What should I get as my first gun stock

Also quest 2

[wispy silo]

Idk

BUt what u looking for

smth small simple to use or

[royal wagon]

Take a picture of your stock

[olive dune]

Is there like a consensus top stocks? Like a top 2 or 3 or something. I'm looking for something quality, ideally not 3d printed.

[royal wagon]

Magtube