#🔫・vr-gunstock-chat
1 messages · Page 43 of 1
you have to also account for the height over bore, ie how tall your sight is, and making sure you are looking down the sight straight. if you are looking at it off angle you can experience some parallaxing and have your point of aim be different than what you think you are seeing
oh man
the height over bore will influence how far off you are from the point of aim in pre-zero
it can influence your post zero and post second zero points, but its to a much smaller degree
so in short its no calibrate problem
correct, calibration is exclusively about getting the gun to work well with your gunstock/body
it doesnt affect ballistics at all
damn thanks for investing that much time to help me
is there any way to calibrate so that your off hand doesnt pull the gun downwards when youre 2 handing the gun?
it’s kind of just part of how the hands snap to your gun in this game, but you can make it a bit better by changing the pitch rotation or pitch offset (I don’t remember what it’s called) setting for your non dominant hand to make it less noticeable
Just switched from the forearm brace to the front grip type 2-- gonna calibrate it tonight, super excited. Absolutely love @hollow zinc stock, definitely worth it.
I do however, want to figure out how to make the dominant hand grip a little more comfy. Might take a file to it and smooth down the edges.
i loosened up the strap on mine because sometimes my hand would hurt, but it was because I had it super tight
this is my config I'm using right now feels great. its the XL but measurements are all the smallest haha so I should just use the normal
gotcha. I actually added a 3rd party cover to the hand strap-- helps so far.
Funnily enough, I have the regular size-- and have everything on the highest settings! 😆
Love the green. Might paint mine for the heck of it.
I love the pistol grip! when I was using the front end grips
Wrapped that hand strap for a little more comfort.
So, you switched from front grip to forearm? Interesting, I just did the opposite.
I used the L grips and would wrap my pink underneath like instead of direct contact. but the Cup I think is better reminds me of when I had my Kobra on Q2
Nice. I was torn between the two different types, kind of coin-tossed my choice on getting this one.
Brandon explained it to me, I had mine set up like as a wrist brace. way to far forward. he said to hold up the gun stock WITH the forearm angled down and then it all made sense
for me the forearm brace just helps on the fly if I need to make corrections to iron or sights on guns I just go forward or back on my forearm
Red looks pretty sick though too
Yep-- I know exactly what you mean there. Did the exact same thing. My only issue is that my front hand sways pretty badly. For 14 bucks I wanted to see if this would alleviate that, but I actually did enjoy the forearm brace quite a bit.
I saw one setup on his shop reviews where they had both forearm brace and front grip installed-- a little overkill but honestly that might be my next iteration.
yeah I feel like the front end grips will help with sway
oh yeah! I saw that haha I just dont want to have THAT hard a time putting bandages on
lmao-- my exact thought man. snagged myself so many times wrapping that bandage
Are there any good videos on how to calibrate? I’m having a little bit of trouble
for a specific stock, on in general? I haven't found a good video yet, mostly trial and error
In general, like I feel like I get it right one time and then I load into another game and it feels so off
The Ultistock? I can make a video for you
check pins
Don’t waste ur money on a gunstock they don’t work for games
😂
did they remove irl gun channel?
Anyone had any issues with the magtube covering up the tracking camera on quest 3. Think my buttstock is to close the camera on the bottom right 😄 can't seem to get it in the right spot 😕 🤔
Yeah
Is the forearm brace consistent or does it mess up sometimes? Mine coming in mail tomorrow
Doesn't matter my right controller keeps loosing tracking. Think it's a tracking issue
you got the q3 cups for your magtube?
there were specific ones made that dont cover up the bottom LED which is critical for quest 3 to hold on to tracking
quests tracking is... less than stellar
Forearm is nice, and def works with practice. I switched to front grip but haven't gotten to try it yet.
I Hope when I shoulder the stock the sight will be perfectly lined up with my eye consistently.
Yes got the quest 3 cups. It does get a little better when I take it out the cups. But I've been doing some research and it looks like it is a known issue. The right controller looses tracking. Just looking for a fix now. Thanks for your reply.
what kind of behavior are you seeing
My right controller gets disconnected when I aim down sight. And also just freezes my right hand. And then comes back to life after second. Like it lags. But mainly loosing my connectivity to my right controller
People crying about other people buying stuff is so pathetic, get some money loser and it doesn't really matter
I have a gunstock buddy and let me tell you the setting to adjust it doesn’t even work
Probly should have bought the tabor one
Is the ProTube Quest 3 stock worth the 170?
I think you just suck
Ik how but when I click done the setting doesn’t change anything at all
Do you have the option enabled. I did that once. Left it off but was calibrating all the weapons 😂
Yes
Stand alone or PC? Might need to delete save folder in localappdata
^^^^^
I have stand alone
Idk what that has anything to do with calibrating something in the games settings
It’s because it’s not overwriting your preferences. Like your saved calibration in your save folder is messed up
Oh
Maybe factory reset?
Nah no need for that
Just saying...it MAY fix
Factory reset fixes anything wrong with the headset not the game
It probably would, but quickest way is deleting that folder.
Wouldn’t that get rid of my saved data
Then 2nd quickest is uninstalling the game
The absolute quickest is really triple checking under calibrate physical stock is indeed enabled 👀
It was and I made sure my ak one was calibrated
it wipes out save data, but check the pins in #❓・questions for how to delete your local savegame data which is not deleted when you uninstall and reinstall the game
Oh Daing really
It automatically made it so the gun was facing down words and I put it perfect ten clicker done but nothing changed
hand pitch rotation is a little messed up on quest atm
but that doesnt change anything when you have a weapon held with two hands, just pistols and regular hand interaction
No it was ghost doing that because my stock works on breachers
im not sure what that had to do with what i said, i was only talking about ghosts of tabor
Oh
Well I guess I’ll delete and reinstall game
If that doesn’t work imma just get Pavlov
again, deleting and reinstalling the game will not remove the files you have been directed to delete quite a few times now
when you need help it is important to listen to what you are being directed to do by those attempting to help you
Lemme try to record it
there is a pin in #❓・questions with detailed step by step instructions on how to do it on all platforms
as has been mentioned several times now
Yo
I’m pretty sure ik how to do it
I need a team
wrong channel
I think mobile vr station would work
ugh
you keep not reading instructions given to you
if you are unclear in the instructions or one of the steps, ask and it can be clarified
you are literally being spoon fed and you are pushing it away
Idk how to check pinned messages
theres a pin at the top of the screen
or swipe right if on mobile
er sorry
they got rid of that. now you click the channel title name on the top on mobile
It says to delete game app data
keep reading
If I do that it gets rid of all of my progress
keep reading. dont push the spoon away
its literally step by step with all your questions answered specifically
It just says go to storage search up ghost and delete app data
That gets rid of everything
and then at the bottom what does it say
Yea but I don’t want to get rid of everything tho
what do you think youa re getting rid of that you dont want to
Progress, money and possibly dlcs
oh jeez
Nah that stays
you didnt even read it
Progress and money goes away
you continue to push the spoon away when you are being spoon fed
It’s just your like height and settings
It did say that at the bottom
that question is directly addressed
why are you asking for help if you continue to refuse assistance?
you are wasting peoples time, thats not very polite
Huh
Ah great I’ve lost basically everything
can you try reading the words
Guess I’ll have to reget my 5 levels
your loot, money and trader progress is stored on teh server and will therefore not be deleted
that is stored on the server, not your device
Yes but the problem is everything’s gone
quit and reload
when was the last time you played
Like 3 days ago to test my gunstock
Oh no 👀👀👀
i think it was more than a week ago when the wipe happened
There was a wipe
i think you last played before the wipe
xp is stored on the servers
I think once you do a raid it will repopulate your info
i deal with deleting my game data frequently for testing
nothing is lost except settings
Jeeze what happened to the turning
those are the settings that get reverted to default when you delete your file
adjust appropriately
Yeah you gotta go back
It’s working
But the gun is inaccurate af
I shoot a target in the head and it misses
Oh that’s because the guns are zeroed at 50m so closer than that you have to aim higher
This is low-key the stupidest chat history I have ever read wth is even going on
how attach controllers
im in agreeance
Long long did it take you to get used to mounting/placing your controllers with your gun stock in VR?
less than a week
I change my gunstock a lot, and usually it takes about a day or two until it's natural again. The trick is to not think about it too much and let muscle memory do its thing for you
for my part, I move my support hand past the bracket and sort of drag it back until it hits the magtube bracket, then rotate it into place. Works every time, regardless of length
Is it worth it to get a gun stock?
pretty much everyone here will say yes 5000%
if youve got shaky hands like me then yeah absolutely, virtual stock cant help with that
What gun stocks to get tho?
Guys, im Playing with the Pro Stock, but i feel like im super Slow Looting, Aiming, Preparing with it, would you recommend Playing with the Virtual Stock? or is there a stock that this game works better with?
Also the Cable gets in the Way alot with it.
Tomahawk/Butcher vr gunstock for quest 2/3/pro .Save 5% now using this link https://skolvr.com/discount/fox69 For any info type don’t hesitate to reach me on DM🫡
hahah man saw an opportunity and took it
after a bit of playing you'll get used to it and it'll be a lot faster but ofcourse never as fast as without a stock
3How i calibrate a physical Gunstock? Dont have the calibrate Button in the Menu
turn on physical gunstock first
Hi
He make the right choice 💪🏻🥰
thats wild
@low stream
Give me a min
There is an "official" tabor stock but it's on the more expensive side
Anyone know any good gun stocks for quest 3?
1000 different answers incoming :p
thank you for the ping. next time please do @ Moderators and it will get the whole time notified, not just me 🙂
OlenVR cough use code Crawler cough
can do wasn't sure if the role was pingable
lol
nope it's pingable for situations like that
Is anyone else having an issue when they enable physical gunstock and they have their gunstock connected with their controllers you guys move sideways when you’re really trying to go forward
do you have head based movement on? if not, turn it on
I have left hand movement
And other people have left-handed movement, and they don’t drift to the sigh when they’re trying to go straight
yes, it’s in setting inside
That shit is gonna cost me £80 to deliver
rip
i dont mean on which controller.... i mean that there is a setting if it should base the movement off of your headset orientation (so that forward on your stick will be moving to where you look instead of where your body is facing)
Yeah, I understand what you mean but what I don’t get is, I had a gunstock the same gunstock I had but last wipe I had no drifting to the side when I was trying to go straight, but now I go sideways
the setting for head based movement probably reset after wipe i think
just double check what you have it set to
Head base movement is off
I don’t like it because I like looking around when I’m trying to move
And other Live streamers don’t have to turn that on not to drift sideways
basically everyone uses head based movement. if you dont want it then yes it can drift to the side because your body orientation isn't the same as your head orientation
it isn't hard to correct your movement with your controller stick when looking side to side to still continue walking straight..
thats bc they have good movement control
I copy their settings bro and I’m not getting the same thing. I’m drifting sideways and I have no stick shift. It’s not like this in any other game when I use a physical gunstock.
if you refuse to accept our answer then idk what else you want
streamers use head based movement
Ok
That one is junk. I can tell just from the design
What is a good gunstock that isnt super expensive
This is the 🤴 of all gunstock’s https://skolvr.com/discount/fox69
I feel like you should be required to put an asterisk in and say you are sponsored by them
That it’s another thing,but who ask for a really good gunstock it’s my job to help them🥰
stop the 🧢 you just wanna see 💰💰
Yea shilling for that paycheck
I see that 😏😉🤣
should i buy ultistock or something else
You are free to@choose every thing you like bro🥰
Looks like a worse istock
Cheap but good quality stock for q2?
Wanna get one cause I have on for my pcvr but idk what to get thats functions well with the Q2
Anyone know a good one that comes with a strap that like wraps around you?
protube
any 3d printable gunstock recommandations?
Never in my life will I be spending 80 dollars on a gunstock
Hey @nocturne lotus & @dry merlin can you please confirm the Tabor Raidr stock has been tested and works when using Quest 2 and/or Quest 3 and wielding iron sight guns that need to be held up high (SKS, Hunter…)?
Currently GoT has an issue with controller occlusion of the offhand when using a straight stock with these guns. Unfortunately GoT’s calibration doesn’t allow the offhand to be independently raised.
Not sure what the physical workaround would be for this when using a straight stock but I hope there is one.
Although I’m very happy with my Mamut Apto (with WASP joints) I’ll be ordering a Raidr once it’s confirmed to be fully supported in GoT.
Thanks!
My ulti stock is coming in the mail today. Wish me luck boys. I’m also going to buy the Independence Edition.
Just get any stock that has a adjustable end. Other basic stocks are not worth it for tabor due to the calibration system.
Seems like your dominant hand will be somewhat limited. With that front piece you're not going to be able to pickup items off the ground with that hand. Also even in the video bandaging looks awkward. I guess it's nothing that can't be overcome once you get totally use to using your non-dominant hand when needed. Please post your experience either way.
Oh and good luck! 👍
Without them implementing actual two point calibration with correct hand position, most stocks just mean you can't use certain guns :/
There is a reason why no games use what Tabor uses and have actively ditched that system if they had it.
Yeah that's my assumption as well but I hope I'm wrong.
Not to mention Tabor's tracking issues when using a stock.
tabor doesnt have tracking issues with stocks
Only game where my offhand stops working with my stock
Thought it was the tracking on Q2 but I can't replicate the issue outside of Tabor.
oh quest 2, yeah thats a quest tracking issue
Well... technically it's a controller occlusion issue that every other popular VR game has addressed with a more effective calibration system
Ah so they have implemented a workaround for the Q2's lack of tracking?
Seems that Tabor is just really lacking on catoring toward gunstock users then
its not gunstock related
That isn't even including the pitch/height bugs that occur with the physical gunstock setting.
Hopefully with a Tabor Raidr branded stock coming out they will feel compelled to provide better (more complete) gunstock support for all users.
Although it may have been patched, haven't played in a few months
Slightly better but still no offhand controller fix
Well they certainly don't have to do much work.
Only difference between the broken system and working system is that you can adjust offhand, and that you actually hold the gun rather than having a floating ghost where your hands don't actually line up.
Both of which already exist in the game.
Yeah exactly! I totally agree
Honestly I'm baffled they even decided to go with an already known broken calibration system in the first place when they launched.
A while back one of the devs, may have even been Scott chimed into a similar conversation saying there will be changes to the calibration system. I was hoping it would happen before the Quest launch but alas... 😦
@stuck oxide yeah it was Scott. Here's his message saying that fixing gunstock calibration is on their list but other things need to be done first. I hope it's still on the list. It's been months.
#🔫・vr-gunstock-chat message
Here we go,my boy💪🏻
yeah bet it won't be fixed until the gunstock drops
That's not too far off so OK
@stuck oxide to be fair Onward by Downpour Interactive also has a bit of an issue which is similar but not nearly as bad. Since their last gunstock calibration update they seem to factor in hand tracking to some degree even when the LEDs on the controllers are completely visible. At least that seems to be the cause, they're currently investigating. It's causing a VERY slight floatiness which is only noticeable when aiming at very distant targets. They've had years to dial in gunstock calibration and it's still not absolutely perfect. Only fair CWS gets at least a few months to catch up.
They had the same system as Tabor for years and that recent update swapped over to what contractor's and Pavlov have.
I was in the same boat with onward for some guns but it wasn't nearly as bad as tabor. I could still use all the guns to an extent at least.
With Tabor I can't even hold some of the guns in two hands, let alone aim.
It's hard to differentiate what exactly is calibration related and what is dominant hand offset glitch related
Can't wait for Is quarter 1
This right here is the interesting part. As a q2 user and protube enjoyer. I get offset broken wrist syndrome playing pcvr. But seems fine on standalone.
I somehow set my stock up a year ago to a certain way that it works for Onward, Contractors, and here for Tabor without any calibration. Although i still do it on contractors cause its just sooooo good.
Would do the same but the way I have mine set up right now is super comfortable and ergo for me 🙂 is what it is. Still able to clap cheeks with ease. Even with the quarks
Kind of the same for me. My stock setup works for Onward, Contractors, Pavlov, Pop1, Breachers and more without making any changes. Also mostly works for GoT except when trying to use iron sights on certain guns such as SKS & Hunter. Although I have the option of configuring me stock with a bend or two I prefer a straight main tube. What's your setup and can you use the SKS, Hunter and similar guns?
(Off topic) Are the quest 3 controllers the same size as the quest 2 controllers (excluding the ring) because I have controller extenders that fit onto the slide where the battery is.
They are a very similar side but not the same. The battery door is different so I'm afraid your controller extenders (Kiwi?) will not fit the Q3.
Okay thanks
What about the interface, will my latex cover from my quest 2 fit on the quest 3
If it doesn't go up to the rings then my guess is yes, it would fit. Worse case a bit of trimming should do the trick.
You should also cut a hole for the lower LED sensor
I have an Ultistock, it's absolutely fantastic. Takes a little time to adjust to your liking, but I'm thankful for plethora of adjustment points. Wonderful product.
Picking up loot off ground and bandaging is OK?
I mean the face interface
hell yea whatever works for you and is comfy no doubt
Muscle memory training is key here:
- bandages need a little bit of a wide circle to not crack yourself with the stock; after a few practice runs, I have zero issues.
- off the ground, I generally use my left hand, however-- dominant hand is total possible. The secret is palm down to the ground, and the stock sets flush with the floor. I have no problems this way.
ok then yea your right same deal, the sks is weird for me and the UMP, Vector, MPX, and MP9 USED to be like that too for me but something changed idk cause i dont have any issues with the smgs anymore. But yea still the base sks and hunter are a nogo for me lol.
Oh... no that wouldn't fit. Unlike the controllers the Q2 and Q3 are significantly different shapes and sizes. Also you wouldn't want to risk covering the vent which is just a thin little slit around the face and sides.
Nono
Tbh, I've had a lot of good benefits from just practicing in the tutorial with it. Extremely worth the time
Training rounds are very under utilized imo
Yeah SMGs are good for me as well, now... It's not like I'd use the SKS or Hunter often but I'd like the option. Thanks!
yeah just had to run through the tutorial again cause i couldn’t get the mp5 to load then i realized you have to lock it
Akm all the way
they didnt send you the free rubber cover? is that cloth or rubber like
yea same!!! lol
Good to know, thanks! I guess the Tabor Raidr stock with the piece sticking out the front will have a similar learning curve. Good to know.
I dont have a q3, I heard it doesn't come with a rubber cover for the facial interface, so I'm wondering if the q2 one will fit
Oh a silicone facial interface cover. I'm thinking that may be similar enough but not sure.
no i have a q2, meta sent me a free rubber covering for it.
but i fear im confused and lost lol
Nooooo not mpx issues. That gun is my jam haha. I configured my stalk specifically to run it. Just wiping the floor with people in silo
So you're planning on upgrading to a Q3 and wondering which of your accessories will fit?
Hate to tell you but the stock strap and facial interface included with the Quest 3 both kinda suck. I originally added a silicone cover but even that wasn't comfy.
I ended up sticking with the AMVR facial interface for Quest 3 & the BoboVR M3 strap with an Anker Redux 10,000 mAh battery attached to back.
That's what works for me personally but everyone is different. Not saying what I'm using would be best for everyone. Good luck!
Does the quest 2 rubber interface fit the quest 3?
Just tried the other way around. My Q3 silicone facial interface cover does NOT fit the Q2 so I'm fairly certain it also would not fit going the other way from Q2 to Q3.
I don't have such a cover for the Q2 so can't try that on Q3.
What accessories do you have for the quest 3?
OMG... multiple straps, multiple facial interfaces, several grips, knuckle straps w/ battery door, several gunstocks, power banks, bHaptics (vest, hands & face). I guess that mainly covers it.
Does kiwi make these for q3?
I like kiwi but they need to hurry up with q3 products
yeah Kiwi makes some good stuff
The one thing I didn't like about the extended grips is that they aren't molded to the shape of a hand. Like no indents for fingers and such. Still they are good for large hands.
I dont have large hands I just like the loop for your hand so you can let go, the stock controller hack egan to hurt
And more comfy
Ello
There were lots of grips with straps for Quest 2. I think both the AMVR and Mamut grips were more comfortable than Kiwi but like I said the Kiwi were also good. Hopefully there will be more of a selection for Quest 3 soon.
Hey dude!
No it won’t
Ill be on if you wanna join in like 10ish?
Yeah see you in there
Alrighty!
How long has quest 3 been released?
about 4 months
But the Q2 was still outselling the Q3 for the first 2 months do to its price drop. Not nearly as many Q3s out there yet so not as many accessories yet. Soon I hope. 🤞
Same
yea same!!! i love it, just obliterates people
Seemed so weak to me tbh
its 9x19. it gets wrecked by tier3 armor
exactly, literally bounced a whole mag off a t5 and he just acted like he didnt know it happened
never used it again after that lol
i drop tier 6 players like nothing....AP does its job
also aim for the face
🤷
With face shots maybe
idk if it didnt work i wouldnt use
9x19 AP doesnt do any damage against t6
i been running that the storm and UwU mp9 with no issues so again iiiidk. They all die
Lol and that's why is dose so well in silo it's a nakid destroyer. Forevery thing else alpha
yea if it does nothing to t6 armor odds are im getting headshots. MOST my kills are headshot honestly. So i never nonticed it not doing anything,
Yeah head or leg meta. It's just a smooth experience all around
Iv killed my fair share of people running t6 whole I was running the mpx so
All about having fun in my eyes not running what's meta
exactly, i honestly never know "what works" for most and/or "whats meta" just cause i use what i like and i always make it work lol.
but real talk the 9mm smg's are my jam
exactly
I wish the alpha wasnt so meta but it is lol
I think things will shift a bit once gunsmithing is a thing
But that 762 39 round is just juicy
yeah currently i find no reason to use any other weapon lol
its all I run all wipe long lol
Lol not even the occasional overpriced msass?
only if I find one, ill mess around with it haha
alphas are just a solos favorite weapon, high fire rate, low recoil, insane damage. drop people in 3s like its no big deal lol
True that. Although if the m4 had a low profile gasblock version I might run that more
Oh wow I actually tested this “Mini” configuration but I didn’t know if there was a demand for it. I can actually build this version if you guys like it better than the full-size one!😃
You guys wanna see my shitty homemade gunstock?
Yes
Do it?
And that's what matters
Sorry about the poor experience! I haven’t had time to make a proper tutorial yet. If it’s misaligned horizontally, you can adjust the alignment by changing the rotation of the front controller along the tube axis. Hope that helps
Glad it worked out for you! Gunface is a general purpose gunstock and it Modular so it can be configured in many ways. You can indeedbuild a “mini” version using the 2 shorter tubes in the kit and that should make looting very easy.
Is it worth it to play without or with a clothes hangar stock
Its worth it
how i think it looks amazing look at everything that comes with
My bad, I haven’t had time to update the setup video for quest 3. Sometimes if the controller mounts isn’t sitting flush the it affects the clamp. It’s been fixed in the latest revision. I offer free replacement parts on my site. The magnets takes a bit of muscle memory to feel right. Stronger magnets causes more vibrations that affects tracking.
man i dont know what gunstock i should get
Nothing I recall having a problem with, and I'm right hand left eye which more or less gives a higher risk covering sight for more cameras aiming down sight.
Will try it out and record when I find a moment, assembly is taking all woke time currently.
Thanks much appreciated. I love Mamut's customer service!
Are you guys the ones making the raise?
Yupp
Is there planned a better stock?
I mean the wire piece not the whole thing
Odd question
Okay so there was someone in here I bought a gunstock from a whiiile back, I forgot their name shii
Whos the top gunstock makers
The wording is odd. I mean is there planned a cushioned stock attachment
Not currently since we haven't really seen a need for it. But if I know myself right, I'll start cooking up new stuff when assembly is done
Nvm, found em
Awesome. I preordered so I’m excited
So close now 😄
I hope it’s not delayed again
Again? We've been on track since production started.
Q1 still stands
me neither, apparently it matters if fthe mount is on top or bottom to not interfere with with tracking
too bad because I dig the look of this one
Can say friend of mine bought that style. Nothing but problems with tracking
Constant cutting out a tracking loss when he would ads
thanks for confirming; I already have issues with tracking 💀 (lot's of glass tables) but turning on all the lights I have in the room makes it 'playable'
Give it a 8/10 for ascetic but yeah lol
which one do you have if you don't mind me asking?
Hey i have a question about configuring the gunstock is it wonky for you guys to
I will. I usually loot with left hand anyway but if I can get fast/consistent sight picture on target I don’t care about anything else lol. Will post updates this weekend.
Since it was well within my budget I went with protube. Yes it's expensive to some. But I'll sacrifice the money for having something that is super comfortable and ergonomic to use.
I've heard a lot of good of this one, is there a successor called magtube? or is that the same thing
Same company and yes mag tube is the new version of ot
can anybody help idk how to set it up
thanks 🙏
Calibration or the stock its self
i have a spine one idk how to calibrate its wierd for me
they have a yt guide
Yes the original release was told to be the end of last year then pushed to q1 this year
can u send me the link i was never able to find it
@thorn prism click this to jump to it
ty
Rage is pretty much a protube guru when it comes to this kinda think
sorry maybe I was mistaken the stock; I was looking at about 10 models the last hours 💀 is all I was able to find https://www.youtube.com/watch?v=g_J0nMEZNp0
The gunstock calibration in this game is a little misleading. The ghost gun should not be trusted. During calibrations
Reset calibrations and then ads with your preferred gun. Make suddal adjustments in the calibration system at a time and save then ads again
Moving the adjustments up or down or closer/further away
whenever i try calibrating it it is always aim down no matter the changes i make is it wierd on quest 2
you have gunstock calibration enabled and any calibration you make is not working? which gun are you changing
yes and the assault rife i mean like if i change it for the whole gun to go up or come closer that will change but it will always be aiming at the floor when i try to change it to my prefrence
pointing down means you have changed the elevation too high relative to the front
got a clip?
sent u one
not really
if its not changing at all then delete your savegame and try it again
also take a pic of your gunstock
like clear calibrations
no, delete savegame. check the pins in #❓・questions for a step by step. its very quick
ah, fixed height stock. problematic
delete your savegame and try again
if its pointing down, lower the elevation some more
ok dokey
will that reset my tabor account??
no
ok
it covers that in the instructions
well i jsut watched that guys standalone vid
it didnt really work i think its a gunstock issue
I raise it a bit and then its aiming in the ground then i lower and i cant see in the sights then so idk
i do an then i cant see in the sights
but then a riase a tiny bit and its pointing down
Yeah, that’s going to be the limits of your gunstock then

So that's what you were using every time we played
Ordered my Tabor Raider stock today! It should ship about the time I forget I ordered it
What's the best gunstock?
Independent 3rd party review time... How are their gun handling skills?
(i.e. who gets more kills, you or them?)
- And do you use a stock yourself?
what gun comes stock with the game
Jealous? lol
Yes, yes it is.. It gives me about 70% suability and accuracy.
who here hyped to get their tabor raidr gunstocks?
Buying anything dm if u have anything good or deesent
What country do you live in? I'd rather not deal with international shipping
(I've purchased stuff here from another gunstock enthusiast before)
@pure crown no, I’d say get a magnetic one that detaches, if you get one that doesn’t it’s gonna be a bad day for legit doing anything but shooting
Ah okay any recommendations next day delivery and is pritty cheap like under 60 ?
And that one looks made out of really cheap plastic, I’d personally recommend getting the brandodrum stock from Etsy once he starts selling again
Maybe not next day
But it’s a cheap and effective option
Ah okay could you send link ? If you got a min
UltiStock (Regular Size): fully adjustable, modular, ergonomic VR Gunstock for Quest, Valve, HP and Sony Headsets by BrandoDrumVR on Etsy https://www.etsy.com/listing/1493962477/ultistock-regular-size-fully-adjustable
Ty Ty I’ll have a look
I’d personally get the 55 dollar option
Yeah
Oh I guess he already starting selling again
I checked a couple of days ago and it said he was doing shop upgrades lol, he’s pretty quick with it I guess
The end is a forearm brace
You hold it against your forearm
There should be a video attached
That shows how it’s used
But what’s keeping the controller at the front staying stable
I’ll send a video link on the gunstock, https://youtu.be/1m-wDsdlC-A?si=m26N2p4y-WwQ6q-I
This guy goes into depth on it
The guy in the video puts it closer on his wrist which I guess works better
Yeah I don’t really get it that all Ty Ty tho
Of course, you can always @ me if you need help, yeah it’s a little confusing
I see I see so should i invest in that one then ?
But the only problem is it’s gunna take a while to come like the other one I’ve heard very good reviews about it and it will come tmr
Big problem is the other one from what I can see isn’t detachable, I guess for other games the other one might be good but not really for tabor. I’d personally invest in the one I recommended because although it may take longer it’s a more versatile one
And also there’s only about a 5-6 dollar difference from what I can see
The front is held by magnets same with the back you can take the front and the back off
option*
That prob a better pic haha
Seems pretty bulky too lol
That what I like I like bulky gun stock makes it feel more realistic and I have used one similar and I was pretty good
I will dw haha thank you anyway
Of course
I’m sure if you spoke to other people in the discord they can vouch for the ultistock @pure crown
@pure crown here’s me using it in GoT 🥳
Do I really need one to play?
New stock and iron sights hit hard!
No
You don't need a VR gun stock to play the game, some of the best players I know don't use them!
Shout out to @rose bobcat for being a straight killer in this game
real
Yeah you can use Virtual Stock in game it’s a solid choice
Agreed, beats most stocks out there too
Ultimately, it's an accessory. It helps but you don't need it! ❤️
The virtual stock keeps messing up I use quest 3 it keeps like flipping the stock of my gun or what seems like my back controller left and right in high pressure situation so i just turned it off..
id highly reccomend one, the top players will use them. You can alwasy build muscle memory and play without one, but I promise you. Its night and day for accuracy.
link to this one pls?
@wide crown I’d get the one that has all the grips so you can mess with them all. But I started with front grips and changed to the forearm grip and haven’t went back 🥳
How are y’all storing your VR?
Any gun stock recommendations for the quest 2?
I just got my new 7thVR stock, it's excellent for GOT tbh
Killed 4 people first game, was pretty exciting!
For those of you who have cheekwelds, do you find yourself using it a lot?
Raider doesn’t have one so I’m wondering if that could be a possible downside
yes
its a reflex
works for me at least
hmmm ok thank you
anyone got one for cheap who is from england
i do point shooting in some situations, usually when im trying to go fast and kinda shoot around corners, but otherwise im doing a cheek weld because i can aim without thinking or looking
It can get in the way with some weapons due to the limited gunstock calibration
thats a gunstock problem, not a technique problem
games with better gunstock calibration don't have this problem, where you can calibrate weapons individually, but tabor can't do that currently, so it's a calibration issue
just need to let calibration for weapons individually and it's not a problem anymore
hes not talking about calibration, hes talking about the technique of aiming via ADS with cheek weld
if you have a gunstock that doesnt let you do that with all of your weapons, that doesnt make it a problem with a technique, it makes it a problem with your gunstock
it does with better gunstock calibration anyway
but his question was only about technique
oh yeah the technique is much better with, but what I meant is it can get in the way with some weapons because you can't calibrate them individually
not gunstock or calibration problems, which is what you provided
#🔫・vr-gunstock-chat message ships from UK
u like it?
my gun keeps floating away in the middle of fights and messing me up. is this a virtual gunstock issue or some kind of Quest 2 tracking issue? it's been happening a lot lately but I'm not sure how to reproduce it so I can't check easily whether it's to do with the virtual gunstock. I've also been on the fence about buying a gunstock like the UltiStock so if I can confirm this is the virtual gunstock it would make my decision pretty easy, lol
it doesn't exactly float away like the backpacks used to do but just enough to completely mess up aiming. the reason I think it could be the virtual gunstock is because the gun acts like my shoulder teleported up and to my right, and snapping to that point like a virtual stock thing
q2 tracking issue
Definitely seems to be a tracking issue. Perhaps you're holding it too close to your head when aiming
yeah I got it because I saw a lot of mounts holding from the strap and I thought it should hold from the helmet and it blocks dust
I noticed that kind of issue on my Sinlaki. I think since I had to angle the gun so High maybe the tracking got weird
My quest 3 used to do that, turns out I was holding it too close to my face. I ended up checking in the menu. You can see you controller icons on the quest menu, they get like a special symbol if they have lost tracking. Try that an experiment
Hasn't happened since with my new stock
A tad bias.
But for one that's been using cheek since around 2016, competitive and casual, the transition was painless and fluent. Target acquisition is the same, all muscle memory.
So youre saying that there is really not a bit difference in using a cheekweld and not?
I must admit I was a tad sceptical getting the suggestion to design it like that, but, yeah.
It's fast
Not saying it'll suit everyone, cuz I have no idea.
Just sharing my experience.
As some one who has hundreds of range time hours yes. It's natural instincts for me.
Have you tried without the cheek (keeping shoulder)?
I was a bit surprised when doing R&D
I run both ways depending on how I wanna quick draw or precision
I hated cheeck weld tbh and I have shot 100s of weapons irl, Cant stand cheeck weld in vr tbh, especially if switching between weapons at all. I ended up removing the cheek section off my stock
You lack the precision going non cheek?
I just press it against my shoulder.
All about play style I guess
Do you want to trade a golden ak alpha
Yeah the quest 2 tracking is shit lol
Try making better for $200
I’d rather just buy an index, but the index costed as much as my car. Which tells you my budget lol
Yo guys is there any guide on how to setup the magtube/ protube for ghosts of tabor? Like a universal one
Check the pins. There's videos from ragesaq that should help the whole process.
Thank you
There we go.
Nah, not noticing anything odd tracking wise on the Q3 at least, but it could be per user case, no real idea.
I'll add a photo of the setup I used for it after this post.
Raidr looking sexy 👀
Oh, and disregard my shitty ass aim, it's friday late evening, beer happened
Thanks so much for posting this video!
It looks like there is a bit of jitter but it's hard to tell if that's a tracking/controller occlusion issue or you just drank a strong cup of espresso beer. 😆
I hate to be a bother but when you get a chance can you make a similar recording using a gun with a optics and the SKS or Hunter back to back?
Thanks again!
Yeah, no problem, I'll take a swing
You da best 👍
Curious how the index mounts are going to work, quite an oddly shaped controller
though I guess it really doesn't matter, since its a split stock it doesn't have to be easy to take the controllers off right?
When we can have normal hands without offset?
im guessing you have a pico? when they actually add the pico specific bits to the game
I have one that looks more like gun
However, basic offset of hand just snaps gun down
So to aim straight, my phisycal gun looks 20 degree up
ah, take a look at the pinned guide on gunstock calibration
if your gun points up its because your front hand is too high, or your rear hand is too low
so either adjust your stock or try to adjust the game with gunstock calibration by raising the guns elevation
I was wondering how this will work with the RAIDR, since its a straight stock, can't lower the front hand
whenever i have virtual gunstock on im aiming already ready one hand and when i grab my gun with my other hand my guns starts to move somewhere so my hands could be to the left and my gun is pointing forward
I have that one
Thing is, my hand offset just resets to its "standart"
I cant adjust height
so the guns in this game require you to have your controllers in the shape of the gun, and because the guns are in different shapes you have to conform your controllers appropriately
fixed gunstocks have challenges with this
you can try to raise the gun elevation in the calibration system to compensate
I did my best with it, i have adapted, but its causing physical dissonance sadly
Why they wont make it as in contractors for example, or make "gunstock mode" when youre holding gun, when you dont hold it, your hand is just hand
Using physical gunstock making pistols unusable
Which is just sucks
Ladder victim
@lofty sphinx 🫡
Loving my 7thVR stock, M4 do be hitting hard with it
Got this video earlier, idk if they did but did GOT increase quality on Q3
it looks better idk why
I love pistols, and i dont want to just switch in settings according to have i pistol or not, sometimes i use bolt rifle and i need to switch, and then i feel like crippled steven hoking
Might be the performance mode turned off on Q3?
@lofty sphinx Remember, switching to your sidearm is faster than reloading
Scott did say fixing gunstock calibration is on there to do list but other things need to happen first. Hopefully we don't need to wait too much longer.
See - #🔫・vr-gunstock-chat message
Youre so smart. I have already said that i tried my best with it to compensate. Writing with dots making you look so much serious. Wow.
well not everyone here is a snarky teenager that missed out on key socialization during formative years do to a pandemic so..................
Well not everyone is unable to read previous messages so....
Anyway
I think problem lays in game having standart hands offset 20-30 degrees down
So its becoming like that
For some reason game likes to reset offest if you change it
What is a good gunstock
Dude you said you're having an issue with gunstock calibration and I told you the devs should have a fix eventually. (yup a .)
Say thanks or ignore and move on
Probably not like my
Not necessarily for tabor but in general and for a medium priced
I think good one will be one that is not blocking vision of headset, so your controllers could be seen at any aiming position
Yeah I’ve done really good without one but just seeing if it would be for me
Yeah it’s not crucial by any means but no need to bash it
Not odd enough
ahh right, just wraps around the main controller part
Yupp.
Guessing that part isn't designed to attach/detach on the go, with the split stock design
Around a metal bar, so, press against the shoulder as much as you want, solid stuff
Haha, yupp. Full steam assembly right now. My hands hurt
I can only imagine what assembling a few hundred(I guess?) of those must be like
Webm coming up. Weirdly enough my pc encodes it very very slowly...
Might want to add a zero there:-D
Yeah, it sucks big time... Especially with only a handful of ppl
is it in the thousands? damn thats impressive
I'd imagine gunstocks are quite a niche within the niche of VR
Molds are expensive, qty needs to get up to get a valid per piece cost 😅
Oooh that's a good sight😁
hard to convey scale from a marketing imagine, but that did look crazy yeah
CPU's busy
thats a substantial file size difference
best part is that discord accepts both, assuming nitro
Yeah, could have just done that. Still, I'm amazed. With no apparent loss, sorcery
now convert the hella-optimized webm back to a gif for easy playback 😆
Haha, it'll actually get larger.
The same with webp
if I can shove the entire god damn shrek movie as a gif in a discord profile picture, I'm sure a gunstock test video can fit as well haha
Haha, the horror! 256 colors max, dithered
its not intentionely dithered
thats just was 64x resolution does
😆
I think its more colors as well, not entirely sure tbf
I can't find the original file anywhere unfortunately, discord's upload is all I have left
Encoding ready. Forget the part with no apparent loss. It looks like balls.
(Doesn't help that I'm in full M.J.Fox mode).
It'll have to work. 😄
@full ivy
I too have a full leg sticking out of my butt, I see nothing wrong with this.
😆
K mon
Thanks for posting this! They do look about the same so it seems even with the straight stock config you're able to setup the Raidr in a way that avoids controller occlusion.
Ideally I'd like to see a longer range test with a non-magnifying sight on the gun with optics and perhaps a steadier hand but I've already asked for enough.
I'm convinced the Raidr will be an improvement for me and will be placing an order soon.
I'm still hoping Tabor will get an update to the gunstock calibration system but regardless I'll be looking forward to using one of these.
Thanks again!
No problemas 👍
Did they fix gunstock calibration yet?
nobody has one yet
ik but like does the design look any good
i just ordered the tabor raidr from the tabor website is there anyway to check my orders progress with the order number?
can anyone point to any decent stock stls?
I made this and am not a fan. Cups def aren’t it 😔
Is the gun stock how everyone has steady aim? I'm new and thinking about buying one
you can do a virtual stock in the settings
Is it any good? Like does it help with aim?
Cuz my hands are a bit shaky lol so aiming long distance is a bit hard
Those names are wild lol
personally cant wait for the raidr
they deserved it with those names
Any update on the tabor raider stock shipping?
look at announcements
it should be soon i hope
Thanks
It's good, that is what i use. An actual gunstock is superior, but the virtual one is a decent substitute
sks dont work for me at all
Height difference messing with stuff?
It's def extra low compared to ak5c with optics.
Are there some DIY 3D printed (free) gunstocks available for Quest 3 that are actually good? Or well, it doesnt have to be free. I would be happy to pay for the stl file
Ah, I found Quest 3 gunstock adapters for Sanlaki gunstock, that is the hardest part to model. I can use those and build the rest of the stock from whatever or design it myself.
I'm still waiting on my tabor raider stock, is it really that bad trying to set it up in game? I hear lots of different things
I run a stock similar to the Tabor raidr (freedom stock), I don't use gunstock calibration at all and it works great. No set up required tbh
Super intuitive
Thanks, good to know
Seems 7thVR have a new Etsy now, really excited to play with some people today with the stock! Was quite hard to find a decent stock that didn't ship from USA or charge over £70 lol https://www.etsy.com/uk/listing/1665703962/7thvr-regular-gunstock-vr-gunstock-for?click_key=c7c82da2104a7751cebb32fd86d9c1abbd49bc0c%3A1665703962&click_sum=a4879675&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=7thvr&ref=sr_gallery-1-1&organic_search_click=1&local_signal_search=1
Idk why most stocks are so expensive
When will the got gunstock be shipping?
Q1, there's no exacter date
Damn hope its soon 🙏 😔
Who is 7thVR? First time I hear this
looks pretty mid
Can you send a link to the cups please?
@ashen hull just curious, what game/trainer is this?
Breachers buddy
New UK provider
ah okay
Can someone slide me a 55-150 gunstock that’s decent for quest
i meant the stock
ultistock or tomahawk looks the best to me
And the infrared tracking points are not blocked by this design?
how to get gun stock
Buy one
I haven't tried it yet
At least on comments people say they havnt had issues
whats a goos cheap gun stock
istock
Depends where you are
IMO the design of the iStock is flawed
You still basically have to stabilize your non-dominant hand albeit with support of a cable
That's why I like my 7thVR Stock, it's pretty damn good. The Amazon reviews for the iStock say it's 3.6 star too which is a shame
There are some pretty good premium stocks out there, I think there is one with like recoil or some shit
I forget the name
I wouldn’t buy the cgrip
Im just telling which ones i saw that are popular and cheap lol
Ik bro wasn't hating on you ❤️
Ik dw 🗣️
So, I just ordered my first gunstock for Tabor. This is one that's been recommended by a friend of mine. But I want to ask, has anyone here used the LoPro stock from Olen?
I haven't used it but i can say there are very good ratings on the spine from olen
I was tempted to get the spine ngl. But I'm excited to get this one.
I personally got the raidr from mamut vr
Same but the raidr seemed like the better option since its made with strong materials
Isn't that the one that CW is releasing?
My friend ordered a stock yesterday, should arrive today so we can play GOT together! Very hype
We both pretty much suck without stocks and we hate playing alone
Not a fan of solo play myself. My gf plays with me, giggity, and we play with friends as well. But I'm excited to try this stock. I want to try my luck with sniping.
You USA based?
Yeah
I'll be on maybe 10pm UK time if you'll be on? Drop me an add
from what I've been hearing the stocks make it much easier to snipe with
I'm excited!
Agreed, taking off heads is lightyears easier hahah
lol. gonna have to make one then, cause buying one is kinda meh atm
The raidr is by mamut vr
I'm ex forces, I find it lightyears easier to snipe with my 7thVR stock although admittedly I've only tried sniping on other games not GOT yet
Nice marines or ?
British Army
But they teamed up with CW to make the Raidr though.
Damnnn
Yeah i just dont know what CW stands for
Educate me on that one lol
Combat Waffle
Nothing damnnn about it 😂 Spent most of my time tabbing with weight and digging holes in the shit British weather hahah
Ty
At least it keeps you in shape ig
🤣
I'll try out for special forces too
That's very true, I still do tabbing on Dartmoor in the UK. It's great for the heart
I considered going 18th Signals
ally as fuck
Yh
Damn was gonna say go get one if you like being unhappy haha
I like to get beaten i train muay thai
💀
You can't be depressed if ur mad all the time am i right ?
I agree hahaha
My friend was depressed
Wanted to kill himself
told him to get a six pack if he wants to cause himself some pain
Yeah i feel that
turns out eating properly, working out and all that stuff makes you happier
who'd have known
Bro is fine now, although he's in the navy
🤣
so cannot be fully okay hahahha
At least he's doing something nice
I have given up on got until i get my raidr i mostly get killed or me and the person kill each other at the same time 💀
Yeah
I was the same pretty much until I got my stock, it's just spawn get my head taken off spawn get my head taken off
Now I can fight back
I feel more comfortable on the bigger maps too
Yeah
Just gets me pissed after 20 minutes lol
Very true hahahha, you can lose a lot of guns in 20 mins lol
I got killed by a 12 year old saying dont come up here on the graphics card spawn on hangers
If yk what i mean
I don't haha
Hangers? Do you mean the prison cells?
Thats good
Yes yes
I dont know the places that well
I thought there was only one spawn
Was he in the wardens office?
the office building at the top of the hill
Yes just sitting there
I always go there, I alwasy get rekt
Ah. I died to a rat sitting next to vault.
When i get my gunstock ill be the one doing the killing lol
He wasnt even aiming like a real person he was looking away from his gun and shooting like what
💀
I remembered a funny memory
I was on missle silo and i hear 2 kids no guns come up to me
They say we are new dont kill us and i just shot them with a shot gun
🤣
😂
@ashen hull ordered mine! Royal mail Says it comes tomorrow, the design looks dopppee!
@zinc meteor which stock? 
7thVR!
farming boss need 1
I love my Ultistock been trying out the cup grip attachment. But mainly use the forearm grip
@steep orbit USA only right? or at least ships from USA
is it good quality
nah i calibrate my shi
Ah, I don't
Odd.
That video was with q3, mainly to show that I didn't experience any controller occlusion
No I think there is international, but if you’re in UK I really loved KobraVR stocks too
My 7thVR was ready to go out the box, didn't need to change any in game settings which was surprising! Couldn't imagine fucking around with settings
It's 3d printed but feels very sturdy, ive had it a few months and its been great. whats cool is IF i do break something I think the parts are very cheap to replace
Suggestions for 3d printable gunstocks?
Depends on what headset you have @neon chasm
Q2
Only need tubing and a few screws
I used this before getting my new 7thVR stock, it's very reliable
I’ll take a look. I was looking at the sanlaki one since you can put your controller at different angles and lengths on the fly
I have a protube quest 2 cup
this is for Q3 does it work with Q2
that might be it
Yes it works with Q3 and Q2@fair pasture
big bet
My friend uses Q2 and used it just fine and I have Q3
Although we've both since upgraded
@ashen hull
anyone else throw the 200s bean at the Tomahawk VR stock
very true, definitely a cool feature for sure
Although personally I don't need that adjustment
You should be able to replicate the setup pretty close, except yaw though
Just means more settings to get used to
Yea true but if I was gonna build one I would want the adjustability since all guns are diff
Yeah that's true
Also canted grips and stuff
I'm yet to find an issue with my stock, perhaps you can let me know a gun to try and I'll see how it performs
Maybe you can see a gun I won't be able to use
Did you design that one? It looks sick
Anyone tryna team up?
?
There’s a bunch of people in that channel that are also looking to team up so you’ll find more people there
Whats a good cheap stock for quest 2?
I didn't make the MQ3 1.1 that I linked
I just have a 3D printer
Ah k
This is one from 4 yrs ago https://www.thingiverse.com/thing:4538594 maybe there’s an updated one but this is what I was looking out for probably wouldn’t print the barrel part lol
But imma take a look at the mq3 tho too
Reason I stopped using it is because I have the 7thVR gun stock, they offer free replacements if you damage anything within the first 3 months and didn't charge extra for the product that's advertised like other websites do
It's like heyyy here is this stock but you gotta pay an extra £10 or whatever for how it's shown so I went with them as it was simple enough, I had complicated shit
Haha yea. 3d printing isn’t always the most simple
Agreed. The quality of this stock though is pretty damn fucking good
My printer is shit compared to it hahah
It's interesting how each website has such different qualities
I've seen some that have loads of small pieces and it's like looking at a 240p image irl lol
then others that have small pieces that look 10k ultra fucking zooooomy hd lol
Shocked some sites charge like £80+ for plastic
I use this stock: https://7thvr.com/products/7thvr-regular-gunstock-vr-gunstock-for-meta-quest-3 it's one of the cheaper stocks I've found. You can find their Etsy by typing "7thVR" but I believe the etsy is new?? I got mine on the site so idk
My friends one comes today at like 8pm or something like that, or at least he can use when he's finished with work idk 🤷♂️ He uses Q2
@neon chasmYou wanna play some time?
Yea maybe send me a dm with your oculus/ In game user and maybe we can play sometime
Sounds good, will message you now and lyk when I play again broski
Thanks for gunstock suggestions
Oh yea meant to ask but how is a gunstock with a butt work when using pistols @ashen hull
Personally I find it really fluid, It's almost like a support. I recorded a video of me swapping to pistol in a fight
lemme find it
Moments after this I got my head taken clean off as I heard click click click 😂
Interesting. Does the butt and extra tubing get in the way when using a side arm?
Not at all, I find it helps. I cannot speak for other stocks but the 7th works like a charm with pistols
You can actually sort of snipe with them 😂
I used the glock previously
it was quite amusing shooting from further away as you can even brace the pistol into your shoulder to be really accurate
I personally like to do pistol only runs on most VR games as they tend to have insane strength (not really on GOT) you're just limited by recoil and optics but with a stock it's a whole different game 😂
How was it with the mq3?
Fairly similar experience IIRC although I used a resin 3D Printer for my MQ3 so it was so fucking heavy to play with
Yea I’m looking at those carbon tubes are exactly the cheapest either
Genuinely the MQ3 is unmatched if you have a 3d printer...
Inexpensive compared to a gunstock if you just bought it tho
Yea I bet I’m excited to make one
My 7th has a plastic tube or some kind of plastic tube at least, not your traditional white PVC though I don't think. It's pretty light.
Those carbon tubes though.. wow!
That model looks like for quest 3, you think it would work for 2 as well?
For the Mq3
My friend used it for Q2, I used for Q3 and they both worked great
Perhaps print just the controller and try it out
He never had any tracking issues for his controller
So freezing your hands mid air, with nothing physical to stabilize on, I find the un natural shakiness of the sights while workable, very off putting. Anyone else feel me?
Yes
yup, exactly why I ordered a stock. hoping it helps with that issue
Agreed. It's a fucking game changer having a stock but frankly some absolute monsters play the game like @rose bobcat and he doesn't use a stock
Bro is WILD to play with
Some people have Surgeon hands lol
True hahah
Yeh I get there are freaks out there with surgeon like hands, I just don't have em :p
My 7thVR stock is a proper game changer, I couldn't play without it haha. They are UK based too although I think BrandoVR is decent so I've heard if you're in USA
Brando ships internationally through Etsy, ordered his stock earlier today
I just went for the tabor one, hoping they calibrated it well for there own game, fingers crossed I guess
Yeah, that's true although I didn't like a lot of their features personally. That's why I went with 7th. I didn't wanna pay extra to get what is used in videos, didn't wanna wait ages for international shipping and wanted a solid unit since even with that stock you have to aim with your left arm even if it is leaning against the stock
My left hand shakes now so cannot use something like their product
Thanks GPMG 😂
Reliable choice!
Why would the left shake once you have it locked in?
Doesnt seem like it would really move from what I saw
BrandoVR has some kind of like stick out thing you rest your wrist on, doesn't stop my hand shaking
My new stock fixes that so works for me! ❤️
I think it's a neat idea and could help me, guess I'll know when it arrives and I get to try it out
My left hand shakes like I'm about 1 second away from passing out all the time hahah
You using the tabor raider stock?
woah whats that 7thVR?
New stock provider based in the UK. I ordered mine from here but it seems they have a new Etsy too: https://7thvr.com/products/7thvr-regular-gunstock-vr-gunstock-for-meta-quest-3
oh nice simple clean design!
hell yeah I started using the cup on mine for a similar feel
I liked the forearm grip for being able to switch to any grips and sights and smgs on the fly, but now that I have my main loadout i switched to the cup
Ahh see I tried using a stock before with that style cup and I personally hated it. It just felt like it wasn't firmly in my hands so my brain was like calculating everything which confused me a little
the UltiStock just looks so good, I got the purple one with forearm brace coming
ahhh then thats perfect on the 7th because ther're both locked in
Hell yeah! 😎
Honestly each stock has it's differences right so yeah depends what people need
Which stock is this
I love the game, but with how I find the aiming process I feel like I can't fully enjoy it till my damn stock arrives, I've gotten vr attachments for golf/ cricket before and both items significantly enhanced there games.
yeah for me its more immersive, because theres people out there who only use virtual who pop off
Real question is would they pop even crazier if they trained in a stock?
😂 maybe
hi
I doubt tbh haha they've become one with balance 😂
I can echo this as well. Printing a ping pong attachment was so nice for eleven
Guess we will never know, I do know it will help me immensely
Let us know how it goes mate! Excited to see you happy with it though
I love seeing all the different designs that come out, thats why I love the brandovr stock cause id never seen anything like that forearm brace before
Got a full high tier set, kitted ak alpha, best helm, armour.... I refuse to use it until I've received and trained on the thing, kinda a bummer i ended up ordering the one that isn't shipping yet :p
Hahaha epic!!! Knowing my luck I'd get one tapped regardless
Looks like a fun design although probably not the most practical design for GOT when compared to others since the raidr is pretty damn good design wise for GOT and the 7thVR stock uses a similar format so definitely optimised for the game
Cannot wait for the other games to come out
So hype to use the 7th on the game, will be excellent for the dayz style game I forget the name of it
Do you know what magnet type is gonna be best for the Mq3 cuz neodymium seems like it could be too strong but idk
Fair enough