🔫・vr-gunstock-chat

[loud tartan]

need the muscle memory

[royal wagon]

weird to be scrolling through chat and see a picture of you from long ago

[gentle musk]

no way

[royal wagon]

be sure you watch the vid so you understand getting the length of pull sized correctly

[gentle musk]

its the real deal

[royal wagon]

thats a key part of ergonomics and ergonomics is what makes speed and repeatability

and stability

[gentle musk]

yeah if you saw my first setup i had my controllers tilted all the way

[royal wagon]

yeah thats wild

[gentle musk]

and that was pretty confortable with me but with tabors crappy calibration thats not gonna work out

damn i didnt know it was THAT bad 😭

[royal wagon]

ive got a command in my twitch channel that links all 3 calibration related vids

the first one is the old youtube, its still accurate

the second one is my front hand offset for tabor

and the third one is pinned in this channel with my guide for how to use the tabor calibration system

[loud tartan]

so i guess i'll repeat my question too, if my gunstock doesn't match the in-game angle, is that a problem? like everything on gunstock is straight, it feels good, optics are centered, but my gun in-game is angled down 30 degrees compared to the gunstock, should i try to match the in-game model closer to gunstock angle or just leave it like that

[gentle musk]

whats the command

[loud tartan]

!magtube

[royal wagon]

^^

[loud tartan]

crappy paint pic of what it looks like

[royal wagon]

im guessing you have a straight stock?

[loud tartan]

nah i have the magtube

[royal wagon]

you have the middle joint loose so you can adjust as necessary?

[loud tartan]

but not sure what exactly i should be adjusting to make it match better

yeah it can be adjusted

[royal wagon]

different guns require different adjustments

i would reset your calibrations and make smaller changes

read the guide and watch the vid

[loud tartan]

alright, guess i'll try again

[royal wagon]

if its tilting down while holding with both controllers you raise the back end too much or your front controller is too low

guns always draw a straight line betwen grip points

[loud tartan]

ah, maybe that's it

[royal wagon]

calibration doesnt adjust the front grip point position

[loud tartan]

well, i was also trying to one-hand it to see if it could aim down it without the front

[royal wagon]

so if you raised a gun a lot it will point down

thats the rotational adjustment, not elevation

when you rotate a gun so the front points up or down thats the one handed pitch angle

what headset?

[loud tartan]

quest 3

[royal wagon]

hand pitch rotation is fucked on that system iirc

is it something crazy like 40 or 50

[loud tartan]

no, it's 0, i noticed if i tried to use pitch rotation it would do some weird stuff, and pistols would get angled weird

[royal wagon]

does it jump a lot if its set to 1?

i use 6 on my index

anyhow, as is mentioned in the guide, delete calibration, set your hand pitch rotation so pistols are comfortable, then calibrate

[loud tartan]

i don't think so, i'll need to try again. it was doing weird thing like on loading into game, i pick up pistol, it's good. i pick up rifle the npistol, it aims down. i pick up rifle again then pistol, it aims down even further, so i just kept pitch at 0

[royal wagon]

i dont know how quest weirdness wiht hand pitch rotation needing to be an absurd number might affect you

if you have two weapons equipped, one is calibrated and the other is not, odd things will happen

you grab one, put it away, regrab the one you want to use

every time you grab a weapon it loads the calibration file

grab multiple weapons in a row without putting one away, the wrong calibration file might be loaded

[loud tartan]

yeah feels like it was something buggy

but at 0 it didn't seem to have the issues

[royal wagon]

interesting, i use i think 7

[loud tartan]

i guess i'll experiment over the weekend

also relatedly, how's your experience with magtube if you were to do something like a zero to hero run where you had to swap weapons a bunch to random weapons during the raid?

or is it just better suited with a primary you use unless out of options

[gentle musk]

so what do i do if i tighten one of the screws too much and i cant unscrew it lmao

[royal wagon]

thats the whole point of the magtube

you can switch between weapons in less than a second

[loud tartan]

like are there some weapons that just don't work well?

[royal wagon]

no

theres some that have silly offsets if you dont calibrate them

like the JW shotgun, its like 7 clicks down

[loud tartan]

interesting

[royal wagon]

but most guns are +/- 2 clicks up or down

speed between changes can be measured in hundreds of milliseconds

[loud tartan]

should the longest straight tube be used for something like sks?

[royal wagon]

no

again, watch the videos

first video is calibration of the gunstock to your body

second video is front cup adjustment for tabor, the only game in 5 years ive ever had to change anything

third video is using the calibration process for this game

[loud tartan]

the 2nd video, was that before tabor's calibration system?

[royal wagon]

yes but its still a requirement

for using it as smoothly as i do

[loud tartan]

ok

[royal wagon]

i havent moved it since i found that config in like, march

there, back of the front mount to back of the rear mount is 8" nearly exactly

that will make the height adjustments you need consistent and effective

[loud tartan]

thanks, that's useful. but wouldn't whether or not this works also depend on body shape/size? i guess i haven't quite figure out the angles around the buttstock

[royal wagon]

kind of, because the position of the rear mount should be based on your length of pull which is covered in the first video

that will influence where the rotation of the middle joint happens

but it gives you an idea, you should see switching between guns like the m4 + foregrip and the m1asass happening in one clean step

adjust the front until you get that part

[loud tartan]

thanks for the help, i'll try resetting and give it another whirl

[gentle musk]

ragesaq

did you have problems with the controller straps when u used the rift and if so what did you do to make them not annoy you

while using the gunstock

cuz rn the straps keep getting onto my hands

[royal wagon]

removed them

i never use straps ever

over 15k hours in vr and ive never felt like i needed them

[gentle musk]

wow i didnt know you could take them out till i actually tried haha

thanks

[loud tartan]

yeah strap definitely gets in the way of all the knobs

[gentle musk]

doees it matter if i slightly move the controller cup since i cant get it tight enough for it to stay in place

or like it slightly moves while im playing and my finger ends up not being perfectly parallel

[tranquil tiger]

I am contemplating the place order button

[gentle musk]

also to have my finger parallel it would have to be like this

[tranquil tiger]

I always sit on the checkout place for 20 minutes thinking about my purchase

[loud tartan]

ok, i think i figured it out, in order to do the shorty configuration, i just need to set my stock angle to 90 degrees to accomodate my trex arms

[gentle musk]

yo is it fine that i have to tilt my controller that much to make my finger parallel

[loud tartan]

it actually doesn't seem that far off from how he had it in that rift video

[gentle musk]

oh okay nice

the only problem is that my forearm is short af and even with the controller closest as possible to the stock i’m barely able to reach the trigger

ig it’s fine

[loud tartan]

try doing what i did and make your buttstock angle 90 degrees

esp if it's adjustable you can lower the cheek rest so it's the same height difference from your controllers but everything's closer

[gentle musk]

would have to make it like that so that i can have my finger easily reach the trigger

[vagrant sparrow]

Any update on emails or anything for the tabor stock?

[loud tartan]

i'm trying something like this

[gentle musk]

i see

may be a bit short for me LMAO

[loud tartan]

well adjust as you need, that's like the absolute minimum i think

somewhere in between for that goldilocks fit

oh

notice i have my cup as far forward as it goes

to match what rage had for his setup

[gentle musk]

did rage show in his vid on how to get the best stock height

[loud tartan]

no, he said he had mk2 somewhere but he just set it same as his mk 1

don't remember where i read that

[gentle musk]

so should i just have my stock all the way up

[loud tartan]

i'm not sure, might be preference? unless ragesaq has advice there

[tranquil tiger]

should I order the protube?

[gentle musk]

i think all the way up works best for me

[loud tartan]

the higher it is the lower the gun is, the lower it is the higher the gun will be

[gentle musk]

hmm

[loud tartan]

that's before in-game adjustments at least

[gentle musk]

i’ll adjust it when i try to calibrate in game

[loud tartan]

i think it matters more for irl guns with actual recoil, but for vr, i guess it's whatever feels best

[gentle musk]

ah okay

i didn’t know that you could raise stocks for irl guns tho

or ig u would just raise the whole gun

[loud tartan]

i think people modify their stocks, but i dunno too much about guns, just was watching vids and some of them seem adjustable

[gentle musk]

i see

btw tysm for all the help so far

[loud tartan]

we're all in this together, trying to get the best experience

[gentle musk]

all i have left is the front grip

[loud tartan]

if you're doing his set up it's 8 inches

[gentle musk]

well he had much different arms than me haha

has*

[loud tartan]

i think this was mainly for using the same clicks as he did

can always figure your own setup i guess

but the further apart they are, the less watch issues there should be

also possibly more stable?

[gentle musk]

i have my front controller all the way back so that won’t be an issue. stability is also a factor though because farther away is more stable but also makes my arm tired faster

[loud tartan]

yeah

[gentle musk]

ima just try 8 inches and go from there

might give me watch problems tho

cuz we’ll see

guess*

what was the angle for the front grip? or does it just depend on the gun you’re using

[tranquil tiger]

alright just spent my paycheck on the protube

[gentle musk]

nice

[tranquil tiger]

now I feel broke

[gentle musk]

it’s okay cuz it’s worth

it’s like buying a car

[tranquil tiger]

yeah

I suck at shooter games so it'll help me hella lol

should get here within a week

[loud tartan]

i think it depends on the gun

[wanton granite]

WHEN IS THE RAIDR GUNSTOCK ARRIVING 😭😭😭🙏

[nocturne walrus]

Got my mag stock today game changer.

[dry merlin]

First quarter of 2024. Once we can promise a more exact timeframe we will do so. Cool things come to those who wait.

[wanton granite]

sad 😔

[feral moth]

When is Mamut gonna come out w quest 3 Grips😭😭

[dry merlin]

Since we're a small family business we can't really compete with the overwhelming options available on amazon anymore. We will probably make something in the future but currently and the past year or so all attention and focus has gone into the Raidr.

[royal wagon]

this aint right, the angle is too low and you have no length of pull. when you hold the controller in that position the butt stock should be nestled right in the inside crook of your elbow

that will give you a good "length of pull"

[royal wagon]

right controller angle, but that length of pull looks really short, see above recommendation on getting it a bit longer so it meets the inside of your elbow

[wanton granite]

apart from email notifications will we have an active tracker

[dry merlin]

Not really. We will make an announcement when all parts are in house. Then we'll just have to build all sets and send them out. We try to be as transparent as possible.

[loud tartan]

I think I just have really short arms. Any longer and the trigger gets uncomfortable

i could adjust the angle but then i'd also have to pull the controller back

This was the configuration I initially tried

[dusty valve]

Why do you buy the carbone one?

[gentle musk]

it does with my current config

[gentle musk]

chrome is heavier and reflects light which could interfere with sensors. also carbon looks sick

also how do you have ur controllers 8 inches apart without it always clicking ur watch

[strange kiln]

Surely the gun stock makes it hard to pick up stuff

[dusty valve]

That real look sick.
Should I buy the haptic on force tube.

[gentle musk]

your choice

i think its a little bit of a waste because all u get are vibrations

but thats up toyou

[sour fossil]

I have it and love it. It's a "recoil" similar to maybe a .22, an actual moving part that kicks back, not vibrations

[dry merlin]

Its both iirc. Solenoids and vibrators. Im sure there are tons of teardown videos if you want to know more. Cool piece of kit!

[dusty valve]

Is it hurt

[sour fossil]

Oh true it does also vibrate, but just pointing out the recoil is an actual kick not just vibration

[sour fossil]

No not at all.

[dusty valve]

How do you connect it to your quest?

[dusty valve]

Is it vault the 200$?

[sour fossil]

Worth it to me, but that's really up to you

[sour fossil]

Bluetooth, just add it and it works perfectly in GoT

[dusty valve]

And in onward? Is it the same kick with all gun?

[wild ruin]

https://www.reddit.com/r/ProTubeVR/comments/13bid31/products_faq_forcetube_provolver/

[dusty valve]

Have you the big model or the little model

[dusty valve]

Not the prorevolver

[wild ruin]

?

[dusty valve]

It's not the pro revolver I'm talking about the cross

[sour fossil]

It's average ok, and it works just fine

[dusty valve]

The gun cross

[wild ruin]

you're talking about what i linked

what i linked isnt the provolver

[sour fossil]

That faq covers then all dude

[dusty valve]

My bad

[wild ruin]

read it carefully

[sour fossil]

My forcetube has worked flawlessly in all the games I've tried it on. Recoil is different depending on the gun and game, and if you run via PC there's also an app that lets you dial in the recoil

[dusty valve]

I'm gonna but I will wait I just bought a magtube I enjoy it it cost me a total of 200$ CND

[wild ruin]

I'm just saying, basically all your questions are answered in that reddit post

and everything else about how they work etc.

[balmy nest]

Is got making a gunstock?

[jovial hull]

Anybody have a pic of a good pro tube configuration for got?

[wild ruin]

check ragesaq twitch

[dusty valve]

The image can't load

[dry merlin]

Yes we teamed up with Combat Waffle and make an official stock. Available for preorder either via us at Mamut or their website.

[sleek hinge]

https://www.amazon.com/Controller-Rifle、Pistol-Compatible-Accessories-Changing-Over/dp/B0CHJMCZ3R/ref=sr_1_6?crid=THO5XZT0TSTP&dib=eyJ2IjoiMSJ9.ALApomD3etS4st1PeY6m54WkLksVLTOeHlV_DxLppHFljPaXE1htmpbbQtUF4tbvnti--sX5n4vtmepxbKTIAuk5gyph1wrKD23HmYiuSnQKGiF_rdEwySuFiMF9RQVTdWHp0KqxH9ydONi5G4MO5Q.rItsm-pRstoqDQR-9SpxXdDsBILqY2-ZZ0-1iGcHD1Q&dib_tag=se&keywords=magtube+vr+gunstock+oculus+quest+2&qid=1705160036&sprefix=magtube%2Caps%2C124&sr=8-6 this one sorry mi internet is bad

[dusty valve]

That is a little link

[dusty valve]

I think it's my internet because it do that with all single image right now

I haven't played after the update that you need to upgrade your bunker

I didn't know you played it

[winged portal]

Is there a way to make the sanlaki gunstock work on this game in my Pico 4? It doesnt aim right and i think it is because the pico 4 controllers aren't aligned like the quest 3.

Because you guys are recomending the sanlaki gunstock but the pico 4 version, the controllers aren't aligned in a perfect straight line, aod if it can't be fixed, yopu should mencion on the fixed comment to avoid problems like mine

[simple basalt]

Olen vr takes years to ship man

I ordered a gun stock from them last year and it still haven’t shipped

[plush wraith]

https://tenor.com/view/toddlers-and-tiaras-big-grin-excited-girl-giddy-smile-gif-25584914

[sleek hinge]

this worth it??

[dusty valve]

Maybe

[simple basalt]

Look at reviews it might break easily

[tranquil tiger]

I'd say anything that has less than 3.5 stars is a definite no

[wraith flame]

I need a cheap gunstock for quest 2 under £80 GBP

Any recommendations?

Also it has to be simple, not some confusing gunstock that’s hard to use and set up

I’m thinking of the Kobra ‘Vyper’ gunstock as it’s compact and looks really good

[loud tartan]

so a question i had for people who use ragesaq's configurations. Do you grab the forehand part of the gun before you attach the cups to the gunstock? One of the issues I've had while trying to calibrate, and maybe it's part of why my guns get angled so low is that if I have the gun high enough so that I can see through the sights, and especially if I had the front piece one notch down like he does for rifles, then when I have my forehand cup attached to the gunstock, my forehand is nowhere close enough to even grip the gun

with a downward angle, or with my forehand notched up instead of down for rifles, then i can grip the gun as-is, and the gun won't move at all when i grip it, and if i one-hand with a cheek weld, it's also centered exactly

[royal wagon]

the top face of the cv1 controller (where hte buttons are) shouldnt be flat, your angle looks too low, take it one notch up

[royal wagon]

this is uncomfortable? what was the problem here? some of it sounds like the cheek rest might be too high

you shouldnt really have to do any calibration to raise the height of say an M4 w/sight to see down it easily

[sleek hinge]

Guys do you think this one worth it?

[royal wagon]

the height from the bottom joint the backend connects to up to the top of the mk2 cheek rest is 10.5" and thats at its max

[royal wagon]

yes, 1000%

[dusty valve]

It's good I got one

[royal wagon]

full carbon like you have linked

[dusty valve]

Carbone it's just cost a lot

Don't think it change anything

[loud tartan]

This works, but then I no longer have the main hand cup all the way forward like you did

[royal wagon]

the carbon tubes are much much lighter, less reflective (better for all tracking types), but more importantly arent so slippery, so its easy to get the mount in position and not have to clamp it down so much to keep it in place permanently

[royal wagon]

thats not the important part

the length of pull determines where your rear hand cup is positioned for maximum ergonomics

you want that distance you were working on, in addition to having your cheekrest at the optimal height

[loud tartan]

I guess since you did mention cheek rest, how do I determine the right level for that?

[royal wagon]

if the picture of you where you had the butt extended out like i have mine is comfortable, lower the cheek rest until you get a good sight window positioning

the optimal cheek rest location is going to be specific for you, pulling into a cheek weld is your goal, as that gives you 4 points of stability and pulls the sight window right to eye level while you are holding it with an optimal posture

[loud tartan]

Ok, I'll try experimenting with that some more

[dusty valve]

I would like to have haptic

[royal wagon]

if this fits well, go back to this and adjust your cheek rest until seeing down your favorite scope on your favorite assault rifle feels really natural

then get the front hand figured out so you can snap between different guns in single steps and get an optimized sight window really easily

i would put the same sight on an AKM, M4 or SCAR, and an M1SASS

AKM is 2 clicks down, M4/SCAR is 1 click down, M1A SASS is flat

if you can get that down then your front hand is in an optimal position

[loud tartan]

Also what do I do with not being able to grab the front of the gun while attached? Like it's too low. Am I supposed to grab the gun before attaching the cup to the stock?

[royal wagon]

you can do that, but you can also fix that with gunstock calibration

get the front hand position while being held with two hands sorted out first

AKM -2, M4 -1, M1SASS 0

for me thats 8" but my rear hand is close to the middle joint

[loud tartan]

Oh interesting, -2 for akm. I was trying -1. But then it's too low to grip so either I angled the gun down a lot or I do +1

[royal wagon]

right, but that step is without calibration

calibration is for fine tuning things you cant really adjust with the gunstock because the in game offsets are a little whack

ie bringing the gun back further so its a bit more realistic and you have a better sight window position without compromising your length of pull

fine tuning the elevation

and then optimizing the rotation so that when you hold it out you can shoot one handed, which will automatically put your front hand at the grip point

[loud tartan]

Thanks, I'll try some more today

I wonder how much of it is also just Quest bugs

Maybe I should bust out my index one day and try that

[royal wagon]

definitely, the index is better than anyhting oculus puts out right now

[stray ivy]

I have a question is magtube worth the money?

[dusty valve]

Yes but depend of the use of you play a lot it worth

[stray ivy]

what?

[dusty valve]

If you play a lot it worth

[wispy bear]

How would the GoT gunstock work with guns of different lengths?

[stray ivy]

probably agastable

English not englishing for me rn

[wispy bear]

All good lol ty for the response

[stray ivy]

us the istock good anyone?

[gentle musk]

i fixed it. btw whats the small vr that you use

[royal wagon]

https://www.bigscreenvr.com/

[gentle musk]

when im calibrating my rifle it doesnt work

like i tilt it and then when i press done its always tilted up

at the same exact angle.

[royal wagon]

do you have the main gunstock calibration set to enable in settings?

[gentle musk]

i think so

lemme check. btw should i get bigscreenvr or index

[royal wagon]

also SKS is in bolt action

index is good, bigscreen is better

index is 2nd gen, bigscreen is 3rd gen

[gentle musk]

idk what gen is supposed to mean

better gfx and sfx??

also where do i find main gunstock calibration

[royal wagon]

settings, like 4th option down

[gentle musk]

oh i have to enable physical gunstock

[royal wagon]

right under gunstock calibration menu is 'gunstock calibration: enabled'

yes, thats what that means

[dusty valve]

Which game?

Calibration

[gentle musk]

also

when im tr ying to calibrate for the m4

should i have a sight on there or no

cuz im tryna calibrate it ffor iron sights and i cant get a cheek weld

[pure crown]

I just got a magtube and I can’t seem to get it in a setup that i like, anyone have any good guides or anything?

[dusty valve]

Try more ( I can't take you seriously cause of your PFP )

[royal wagon]

take a look at the pinned guide, i also have a few videos on the topic based on a command in my twitch channel (!magtube)

[gentle musk]

so whats the difference between 2nd and 3rd gen

[royal wagon]

many many years of R&D on significantly higher quality components. lenses, screen resolution, etc

like the difference between a quest 2 and a quest 3

quest 2 was kinda quasi 1.5 gen and quest 3 is quasi 2.5 gen

but thats largely just because its a standalone device so the price point is intended to be lower, and the quality level is reflective of that

[gentle musk]

so bigscreenvr is the best vr to get with 1k budget

and also are there mods that let me sign in with oculus account and let me play my oculus games

[royal wagon]

no

well, kinda, but they mostly dont work anymore

you also need 2 base stations and 2 index controllers, get those off steam

[zenith zodiac]

I'm having issues with grips turning my gun when I use my gun stock. If I don't have a grip everything works fine. Any ideas on cause/fix?

Grips as in the weapon attachments in game

[royal wagon]

Got a clip?

Grips should only change the relative height of the front of the gun unless you are mounting it on the side

Or using the RK-A angled grip, that will change the horizontal angle of the gun, that is how it is designed. You need to use a different grip for that to not happen

[modest tide]

@royal wagon Yo dude, would you recommend bigssreen vr as an uograde to vive pro with pancake lense mod? Ive been looking into it heavily recently.

Also what gpu do you have if you dont mind me asking?

And 3rd question? When ordering how long did it take you to get the headset? Just noticing the site has quarter based releases.

[royal wagon]

Yes. The index makes the original vive pro look like a joke, and the bigscreen makes the index look like a joke

I have a 4090

I preordered in may and got it the week before Christmas. They are shortening the delivery time down a lot

Now that they are up to speed

[gentle musk]

btw whats pancake lense mod

and also ragesaq for your setup its $1580 for vr, controllers, and base stations

[sleek hinge]

This gunstock wort It??

I see It and It says IS good for Ghost of tabor

[lethal sinew]

I have it. I don't like it. Opinions here: ## SkolVR Tomahawk

• Price Paid: $181.00 USD
• Included accessories: Just Stock itself
• Stiffness: 10/10 (Elaborate: Very stiff, feels sturdy when utilizing the stock - can pull to shoulder with a lot of force)
• Ease of Use: 3/10 (Elaborate: Initial installation of the little screws can be a pain in the ass. Changing the battery is a whole process that takes the longest of all the gunstock options covered. The non-dominant hand is positioned in an awkward position angled to the side for some reason)
• Customer Support: 5/10 (Elaborate: English isn't his first language, so I'll cut him some slack and instead give him some credit for being super responsive. He's kinda weird though - his answers to my concerns brought up sounded like complaints and long rants that I need to read lengthy replies to. He was helpful when I needed it to install the screw and provided good video links, I just think he's too wordy with customer replies)
• Points of Contact: 3.5/4 (Cheek weld is very conditional and close to the shoulder, feels weird to call it a proper point of contact so I give it a half-credit)
• Weight: HEAVY (It weighs almost 820 grams altogether for both controllers attached to this hunk of plastic. If you're measuring just the right controller it's 560 grams. If you want to use it for a pistol, that's max immersion sure, but kind of unwieldy otherwise)
• Experience with stock: I got it, spent a solid 2hrs trying to install it initially. The connection points for where the controllers sit in the cradle are a bit of a pain to get set up. Once it fits and you're not stripping the bolts, it'll work but before that first-time snug fit, you're going to shred your thumbs trying to get it to fit. The gun is very weight heavy on the dominant hand. It takes a bit of use to get used to the angles and weight of this chonker of a gunstock. I do appreciate it's transformative design. Just wish it didn't fall short where installation is concerned. It's overall a bit overpriced for what you get. I would pass on this stock personally and go for the Kobra Sidewinder if you have that as an option or better yet the FreedomStock VR if you're stateside or willing to pay extra for rerouting of that package.
• Link to purchase: https://skolvr.com/collections/tomahawk-vr-gun-stock

[sleek hinge]

And this one??

[dusty valve]

Good

[lethal sinew]

I just got one two months ago... Good so far. Can't go wrong with it tbh.

[sleek hinge]

I am looking for a realisim gunstock what do you recomend

[lethal sinew]

Realism? Yeah, magtube forsure

[young aspen]

I use mag tube but the calibration is weird in GoT

Not like Onward or similar games

[royal wagon]

It’s different but not difficult, check the pinned guide

[zenith zodiac]

My current fix is turning my front gunstock grip 45 degrees sideways to minimize the movement. This video shows the gunstock grip in a vertical position.

[royal wagon]

That’s the difference in a straight line drawn between your controllers and the default rotational angle the game has defined for your controller

That is normal and expected

[sleek hinge]

This gunstock is good? because i see It and i say put the controllers in the magnetics things may be difficult

[royal wagon]

i dont recommend fixed gunstocks

[thin sun]

what is the best gunstock for the valve is

[modest tide]

mamut apto wasp hands down, outside that magube

[modest tide]

^

[crisp rapids]

that could be cool in other games like maybe pavlov but i dont see it working in ghosts because looting would be weird

[steep orbit]

https://www.etsy.com/listing/1496244400/

Forearm brace XL model is sweet and super customizable

[hollow zinc]

https://brandodrumvr.etsy.com

Thanks @steep orbit

[steep orbit]

😎

[astral kiln]

They have a tabor mod

[hollow zinc]

For folks that are curious https://youtu.be/1m-wDsdlC-A?si=-cKOkD4M8YcIHydX

5/5 star reviews, see why everyone is loving the UltiStock for ghosts of Tabor

[sweet pulsar]

that looks like it would hurty

hurty wurty

[steep orbit]

HURTY! WURTY! lol

[hollow zinc]

Lol it's quite comfortable

[sweet pulsar]

HOW

ITS PUSHING IN TO YOUR SKIN

[hollow zinc]

Everything pushes into your skin

[sweet pulsar]

i mean like

[steep orbit]

very lightly like a little butterfly kiss

[sweet pulsar]

why do you know what kissing a butterfly feels like

[hollow zinc]

250 sales, 5 star rating

[steep orbit]

i cant answer that

[hollow zinc]

Worth a try. But I also have front end grips

[sweet pulsar]

PETA, ATF, FBI, Police, SWAT, and military are all en route to your house.

[steep orbit]

https://tenor.com/view/oopsies-ohno-gif-25793283

[hollow zinc]

Pretty funny

[sweet pulsar]

srsly tho does a gun stock really help that much?

[hollow zinc]

But watches strap around your wrist. No one complained

[steep orbit]

its really immersive and definitely helps on longer range fights

[hollow zinc]

Yeah man it's the difference between being a mime and living the real deal

[sweet pulsar]

wouldnt it get in the way of looting and climbing?

[hollow zinc]

Moves with you

[sweet pulsar]

so is it worth it for probably $50?

[hollow zinc]

https://youtu.be/bSUZ7xrKaF8?si=CwnXo5Eb0fRzsnLp

You're the only person to answer that question

Gunstocks are like guitars. You need one to play but there are tons of options and your style is the only thing that matters

I'd love to support you but I'm not here for a hard sell

[sweet pulsar]

yea its like $50

if i get extra money then maybe but like

[hollow zinc]

If you need cheaper I do like CRgrip, a bud of mine

iStock is a decent idea too

[sweet pulsar]

I will probably attatch a pringle can to the back of my controller

[hollow zinc]

nice

[steep orbit]

aww man lol

[sweet pulsar]

i have a pringle gunstock

i need tape to completely do it tho

and i currently have no tape

PRINGLE STOCKKK

[misty nimbus]

Pringle meta.

[hollow zinc]

That ish is OP

Is just slice the front end of that can so you can contour around the controller more

Otherwise it does the trick plenty of you just want shoulder engagement for the off hand

[ancient minnow]

New meta

[frigid breach]

Testing a DIY stock for 1st time use. Not tried in game yet.

[coral light]

Bro got the warzone ah pistol 💀

[frigid breach]

Sweet looking, was gonna swing for an Ultibrace initially, but shop was closed for a break over Xmas. I found a print on thingiverse and decided to try a cheap DIY to test for my 1st stock. Might still get a better stock if I play more shooter

[ancient minnow]

Real

[steep orbit]

Yeah it’s great for Tabor

[sweet pulsar]

not as good as the pringle

guys i tested out the stock its crazy

but im left handed and i tested it on my right hand for some reason so idrk

[frigid breach]

Can't afford the sponsorship

[sweet pulsar]

😔

[ancient minnow]

Should I turn it into a VR guns stock

[gentle musk]

what even is that

[ancient minnow]

Did it

[glad plume]

Where should I get a gun stock

[ancient minnow]

Make one

[quiet latch]

Would this gunstock be a good choice I'm new to the fps vr gaming and I would like to some advice on this subject

https://www.etsy.com/nl/listing/1550743814/wield-vr-onestock-the-worlds-fastest-and

[royal wagon]

imo its missing a key feature, being able to change height between controllers, its an important feature to make sure you can use it in every game possible

changing of length is not always a particularly useful feature in stocks, ive very very rarely needed to do that, like, a two or three times in 7 years kind of thing

[gaunt sedge]

Anyone have any tips on how to use the Protube vr stock? I struggle with configuring it correctly with the game, takes me 10 mins per raid to get a proper calibration on the guns I use.

[royal wagon]

my twitch channel has a !magtube command that will show you 3 videos on how i configure it to be optimal for my body and the game

also, read the guide pinned here

[gaunt sedge]

oh hell yea thanks! Seen your streams btw the auto zoom on ads is pretty sick

[royal wagon]

its not auto lol

thx

[gaunt sedge]

oh shit its so seamless looks like its auto lmao

[quiet latch]

Why would the height be an important, out of curiosity

[royal wagon]

different guns have different shapes, and its mostly a difference in the height elevation between them to get an ads properly

[dry merlin]

Yaw is also very important imo. There are a ton of options out there. From pringles DIY to anodized aluminium.

[hollow zinc]

Darn, sorry about that! I'm open now!

[frigid breach]

Hey don't get it wrong. Just saying it was a time and space thing. I just thought I try out a diy solution and see if i get more use out of a gunstock before committing to a purchase.

[hollow zinc]

All good man, what you made looks pretty good actually

You design that?

[frigid breach]

Having done a quick test with the fixed diy option. I can see how limited it can be

[frigid breach]

Neh not that talented. It's a design I found on thingiverse. Ticked most of the options I was looking for and a friend printed it out for me, so very low cost for me to try

[hollow zinc]

Ahh cool deal

Hit me up if you wanted to try an old version of my stock. Waiting on my patents to be filed but I'll be selling files to a cheap version at some point

[quartz oar]

The controllers are just placed in for the pic that's why they look wonky

[tardy kayak]

we love pipe stock

[quartz oar]

Sarcasm? Lol

It honestly works wonders until my front hand get stuck mid air, I believe it's cause I need to either raise it or move them further apart

[tardy kayak]

i just use my mouth to aim

[tardy kayak]

dont use virtual with a real gunstock

[dusty valve]

How do you reload?

[quartz oar]

No I switched to virtual after I had issues with this

[quartz oar]

I was worried it wouldn't work to but it didn't interfere

[tardy kayak]

ah, id still say to just rest your controller on your chin or smth

[quartz oar]

I'll have to try that

But virtual was working really well until it started bugging

[modest tide]

a raidr lol

[gusty elm]

MAGTUBE X GHOSTS OF TABOR RUNDOWN!

https://youtu.be/pUFvpvrhd0s?si=torUSX9ZJTpK7QUi

[burnt barn]

Thanks for this, just ordered mine and it will help

[silk oracle]

thing was expensive as hell i had to get an i stock

[gusty elm]

Awesome! No problem. It's a game changer

[hollow zinc]

My store has been blowing up with GoT players recently. Quite a bit more affordable than Magtube as well

https://brandodrumvr.etsy.com

Here's a review https://youtu.be/1m-wDsdlC-A?si=TL7jWjDmcuBNHegE

[hollow zinc]

If your back controller blocks the headset's view of the front controller it loses tracking and goes wonky. By the looks of it, it's probably exactly what's happening

[tranquil tiger]

Bet ordered it the other day

[gusty elm]

https://tenor.com/view/very-nice-excellent-yes-meme-nod-gif-17397471

[tranquil tiger]

Think when I considered ordering it I saw your videos on tiktok

[velvet belfry]

just bought it but expect a long wait shipping time

[sleek hinge]

like how much days

[modest tide]

lacks adjustment points it seems

but in the future when they update calibration, like amonth it shuld fix hopefully lol

[warped surge]

For 170, I think I’d rather spend the money on a magtube

there’s other stocks coming to market that I’ve been hovering over. The tabor raidr looks good and the onestock. But they’re both in preorder and the one stock has also been in delayed production.

[sleek hinge]

anyone knows is this gunstock worth it??

[hollow zinc]

Looks cumbersome...amazing but real guns aren't that complicated and you don't even wear magic blindfolds when using those

But Mamut is legit, so there's that

I'd get that over protube or Magtube.

[dark raven]

whats a really good gunstock for tabor?

someone recommended me the magtube but i wanna second opinion before buying anything

[nocturne flax]

No wonder sometimes when I load into raids the gun goes wonky and sometimes it won’t I’m on quest 3

[hollow zinc]

Yeah honestly I'm sad meta didn't just continue with the quest 2 controllers. Those tracking rings served so many purposes and lost tracking way less.

Gave free handers something to rest against. They were just better IMO

The new controllers do feel nicer and work better for slasher games like Asguards wrath but not an upgrade otherwise

[nocturne flax]

That’s gay then

[night depot]

I watched a guy using a coathanger as one a while ago

[hollow zinc]

https://youtu.be/1m-wDsdlC-A?si=KWvfQI69_F2giZ--

[hollow zinc]

Pringles cans also do great.

[nocturne flax]

Magtube in opinion I love it

[dark raven]

thanks, I'll look into em but I like the sound of pringle cans

[hollow zinc]

Sour cream and onion have the lowest damage dropoff at range

[hollow zinc]

This right here should be banned

[modest tide]

absoluteyl wortth it, not cumbersome at all

i give this stock a 10 out of 10, sturdy, reliable, feels amazing and works like magic

its what i use 🙂 by far the premium choice

[royal wagon]

magtube the way to go

[frigid breach]

Didn't try in GoT, had a quick test in Sniper Elite, it was ok, but wasn't ground-breakingly fantastic

probably partly due to the fixed cup placement, can't adjust the pitch angle of the cup, and adjusting side roll needs fiddling with a hex key

[gusty elm]

I would not ive had both. More of a pain to get together and its hard to adjust on the fly. Magtube all the way

[modest tide]

ahh yeah, tha raidr lacks adjuastment in my opinion

[frigid breach]

no really, the raidr will have the ability to pitch the cup forward, and there's a quick release to roll the cup left or right easily

my DIY stock doesn't so that's the limitation. but the straightline nature of both my DIY and the Raidr stock might be a slight issue from my limited testing

[modest tide]

ahh that makes sens my dude

[modest tide]

I hate the on the fly adjustment, your basically clipping gears to achieve that plus I felt a loss of steadiness when my front hand was variable lol but hey, to eaches own, curiosu though you had a mamut apto wasp 3 or the og one?

[coral light]

Honestly, I would do it

[gusty elm]

Yeah I never felt that and for tabor I don’t use gunstock calibration it doesn’t work well for me. I make the little adjustments I need for certain guns and it works great. And tested using apto wasp 3.

[wraith flame]

Is this worth it, it’s about £60 in my money

[tranquil tiger]

They need to hurry up and ship out my magtube

I'm tired of getting shit on in every shooter

[wild ruin]

We aren't open on the weekends so earliest it'll ship is later today

[tranquil tiger]

Ohhhhh

Aight

I was kinda leaning towards that cuz most places don't ship on weekends

Well glad it'll prolly get here within the week lmao

[analog cave]

protubevr Starter CQB gunstock can be valid for tabor?

[tranquil tiger]

I mean there isn't a lot of customizability with that stock and it's pretty compact so idk if it'd work good for tabor

Also says it's mostly meant for smgs

[wild ruin]

The tube is shorter than the magtube, so you can't have the hands further away. You can get a shoulder stock upgrade to make it be closer to magtube, but won't be 1:1 a magtube.

For Tabor I would recommend at least Starter with shoulder stock upgrade. Being stuck on one tube will make alignment in Tabor difficult, like all the other stocks that are fixed on one axis.

Perhaps how the alignment tool in game functions will be changed when the RAIDR stock comes out, to better accomodate stocks fixed to one axis, at which point the Starter will likely be fine.

But since we don't know and only time will tell, that is what I can recommend right now.

[magic tangle]

Cant wait for my magtube to arrive tomorrow 😁 after days of comparing the magtube was the winner for me.

[wild ruin]

https://www.reddit.com/r/ProTubeVR/comments/15mfyel/magtube_quick_start_guide_just_received_your/ this is a pretty solid guide to get you up and running. reference ragesaq's twitch for a good setup for tabor

[burnt barn]

Do you guys pay ragesaq btw ?

[wild ruin]

That's probably not a question most companies would answer just fyi. I don't handle that side of things at ProTubeVR so couldn't say what we do or don't do and what is or isn't made public knowledge 🤷

[agile hearth]

that's such a random question lol

[agile hearth]

You can still pre-order the Tabor Raidr gunstock made by MamutVR and GoT

https://ghostsoftabor.com/product/tabor-raidr/

Is aimed to be shipped Q1

[burnt barn]

not really, the guy is selling lots of units for the company i dont see why not.

[tranquil tiger]

Mine finally shipped out this morning let's go

Comes Thursday or Friday

[modest tide]

hahahahaha XD

[latent yoke]

Do you know when the forcetube (bhaptics) will be compatible with the quest 3 standalone version like the other games? I think it is already compatible with steamvr.

[velvet belfry]

Ordered it last month and the estimated delivery is the end of this month

[wild ruin]

That's something the devs would have to answer. It used to work but doesn't anymore. I'd imagine they're quite focused on bringing the Quest version to the Meta store (graduating from App Lab) right now though

[timber tree]

What’s a good and sorta cheap but reliable, and I can use it for cqb and as a sniper?

[shy mulch]

The Tabor gunstock?

[tranquil tiger]

No the magtube

[shy mulch]

Ahh nice. I’ve heard it’s pretty good. Hopefully you like it

[tranquil tiger]

Hope I do lol

[frail flame]

As far as ik they ate

Are*

[burnt barn]

ordered mine on weekend, coming by friday this week, not bad.

[hollow zinc]

there are tons of folks who want a less expensive gunstock, by far the best out there is CRGrip

a great guy who's just crushing it https://www.etsy.com/listing/1585617894/cgrip-vr-gun-stock-for-all-quest

[pure crown]

Tabor or magtube?

[burnt barn]

magtube

[warped surge]

I actually just bought this to use while my onestock order fills out.

[pure crown]

The raidr gunstock ???

@tranquil tiger

[dry merlin]

No its still in production 🙂 We'll make an announcement when all parts are in hand/en route to the Combat Waffle team

[pure crown]

Okay

[tranquil tiger]

Magtube

[proud oxide]

I was so close to buying that one yesterday. Still on the fence on whether to go with mag tube or raidr.

[hollow zinc]

Personally I think it's cumbersome to try to clip or magnet your way into something hanging from your neck. I think Cr grip is better because you can just leave it on your dominant hand and still do things

That's the approach I have with my gunstocks which are also becoming quite popular for ghosts of Tabor

https://youtu.be/1m-wDsdlC-A?si=EkCQ23m_KvlIwROX

[tranquil tiger]

I just went with magtube bc it's gonna be shipping out faster than the raidr lol

[dry merlin]

Well, one product is released and the other is not 😄

[tranquil tiger]

Yep

Kinda what I was digging at

You order them now you get one within a week and the other within 2 months

Only difference is affordability

[modest tide]

Welp, mine is in processing, they should pay you for sales XD

[royal wagon]

you'll want to identify a good strap solution

the default soft strap is not great, the beyond audio strap is ok if you are looking for simple and premade (i've been previewing a preprod unit, i have a preview you can find on my twitter), but if you are open to 3d printing and a bit of soldering the index strap is adapted fairly easily and is incredible

[jovial hull]

Just got this

[modest tide]

awesome, thats what i was thinking. Im definitely working on strap options before it gets here which should be march. Ill look you up on twitter and check it out! Thank you! You enjoying yours? Looks pretty damn outstanding. I currently have a vive pro and quest 2 so no index strap unfortunately!

[royal wagon]

tundra sells refurb index straps for 85

you absolutely cannot beat that value, its the best strap on the market and the best stock speakers of any vr system by miles

[rigid wharf]

Wsg

[modest tide]

very cool, ill check your video on twitter and grab that strap as well!

[rustic vortex]

How do I check my shipping or processing progress I haven’t received a email or anything after buying it do I just need to wait or can I enter my order number somewhere

[modest tide]

on what? raidr?

[rustic vortex]

I bought it on the ghostoftabor website and yes

[modest tide]

Yeah ive heard they dont do tracking numbers yet but not to be worried, just be patient. Thats what they say lol

[rustic vortex]

Ah bet

[runic stream]

So there shipping the raidrs out or are they still not released?

[fluid kernel]

Damn, just got my provolver today and was hoping to use it with GOT

bejdudkkd dhxjsksnekekzndjjdkd

pretty disappointed with the lack of games with native quest support.

[tranquil tiger]

Tell me how it is lol I'm getting mine on Friday

[obtuse stream]

Same

[jovial hull]

Pretty good the only problem is that it’s sometimes difficult to reload since the tube is under the controlers

[obtuse stream]

That’s the only problem you having with it?

[tranquil tiger]

Ehhh yeah thats what the magnets are for

Even then I've heard it is slower

It's a worthy trade off for better accuracy/stability

[jovial hull]

Also some guns just don’t work with it such as the luty mat29, mac10 and some non pistol grip weapon since you have to re adjust the stock in the middle of the game.

[tranquil tiger]

You talking about ghost of tabor?

[jovial hull]

Yeah

[tranquil tiger]

Oh okay makes sense since the GoT devs still gotta work on the calibration for that

[jovial hull]

Yea, is just have calibration off

[tranquil tiger]

I mostly play other VR shooters so it shouldn't be an issue

[jovial hull]

They need to add calibration for each individual gun. Sks and m4 are vastly different but are both under assault rifle calibration. If I find a gun that dosent fit the stock well i just play without it.

[jade mesa]

Anyone here have a quest 3 olen lopro? If so how did you calibrate it because it seems that no matter what I do it never aims properly when I hold the gun with 2 hands

[jovial hull]

It doesn’t work for me either, so I just play without it.

[jade mesa]

U think they are ever going to fix it?

[jovial hull]

Probably, the game is still under development so bugs in general are common in GoT

[jade mesa]

Ik

[tranquil tiger]

I mean there's this video

[tough light]

Wdym aim properly? Like does it point in random directions or something

[jade mesa]

When you calibrate a gunstock it doesn't let you two hand the weapon so when you calibrate it and two hand an actual gun it it aims downward and I can't seem to fix it

[tough light]

Alright, I wasn’t sure if it was a tracking issue, never heard of that issue before tbh

[jade mesa]

I think it's just my gunstock

[modest tide]

etach the pinned video

[jade mesa]

What pinned video

[modest tide]

thew one where rage talks about how to calibrate weapon, it should be workable

what stock?

ive made straight fixed stalks work well enough

[jade mesa]

I'm using the quest 3 olen lopro

I finally got rifle calibrated

[modest tide]

nive dude, yeah its got a slight learning curve for sure!

[shy mulch]

How do you like that stock?

[jade mesa]

It's really good even tho it's 3d printed, it's sturdy and comfortable. It did take a while for me to recieve it because olen marked my order as sent, when they in fact did not send it and now a month and a half later I got it but other than that and tabor's tedious calibration its great

[burnt barn]

I’m sure they will be making a better calibration system since they are working on their own straight tube stock. Which currently wouldn’t work in game with this system.

[dry merlin]

The stock works in its current format on the current version of the game.

[burnt barn]

That’s really interesting, when doing my research into stocks this past week, every reviewer and critique they had was straight type tubes not working in the current system. That’s great then.

[dry merlin]

That said im sure theyll tweak some stuff when feedback comes in from more players

We have a prety intense yawsetting on the Raidr so you shouldnt have any issues

[burnt barn]

Good stuff

Here’s hoping they still improve the current calibration system 😅

[junior ridge]

Having this issue with physical calibration - when you use it, grabbing a weapon resets your hand rotation offset so pistols go funky. I've submitted a bug report but any idea how to mitigate this for now? https://youtu.be/e9A1X5laAXw?si=PxYupTc_ty3FE7Yi

[ashen hull]

Me and @halcyon iris gonna be clapping cheeks soon

[halcyon iris]

Aim improvement 📈

[harsh stone]

Are all gun stocks for this game expensive, and do all gunstocks work?

[ashen hull]

You mean the ones made by GOT?

[harsh stone]

Irl gunstocks

[ashen hull]

Also, that depends buddy. I'd imagine most if not all gun stocks would work.

It's a hard thing to fuck up

[harsh stone]

Just got the game a few days ago, wondering if it’s worth it

[ashen hull]

Honestly, I'd say it's worth it. I went from doing pretty well to taking off heads in gunfights lol

[harsh stone]

What one do you have?

[ashen hull]

I used my 3D Printer to make this: https://www.thingiverse.com/thing:6289919

[harsh stone]

Oh nice, I’m looking to buy one

[ashen hull]

I'd suggest getting one, thing is most are expensive. You could also make one for a few quid like what @halcyon iris did

I'm sure he could drop a picture of his cardboard or whatever it is one

[harsh stone]

Oh

[halcyon iris]

ofc, this is mine:

Is all cardboard, the center of the toilet paper, tape and gift tape lol

[ashen hull]

If it works!

[ashen hull]

One more day to go @halcyon iris

[halcyon iris]

Can't wait to test a proper gunstock lol, I've using this cardboard one for 2 months now

[ashen hull]

Hopefully first class delivery clutches it

[frigid breach]

That's the same one I made 2 days back and shared here 😅

[ashen hull]

Nice! Works well doesn't it

If you're UK based where did you buy your magnets?

[frigid breach]

Not in UK unfortunately, I just got a standard pair of 30x5 magnet and epoxy it in

[ashen hull]

nice!

[plush mural]

Should I try to make this into a gunstock

[misty nimbus]

Grandpa wouldn’t be able to walk no more. But it would be a pretty slick gunstock.

[pure crown]

grandpa temporary, gunstock forever

[tranquil tiger]

💀 that's crazy

[runic stream]

So did they release the raidr or are they still preorder?

[royal wagon]

still on preorder

check the pins

[plush mural]

Indeed

[plush mural]

It’s done it looks ass but it’s my first gunstock so

But no more grandpa tho

[tranquil tiger]

Still got 3 days till my gunstock arrives

[plush mural]

I just scraped the gunstock there was too many flaws

I’m gonna buy one

Any recommendations?

[tranquil tiger]

Magtube

Pretty expensive tho

[tranquil tiger]

Scam lol

[modest tide]

Magtube or Mamut apto wasp 3, those will be your best premium options

[plush mural]

I think the best imma go for is magtube

[rough mason]

I have magni stock from Amazon it's basically the same thing just $80 cheaper

But I can't get the stock to work with Tabor, I just got the game and the calibration is nothing like Onward

[modest tide]

not the same, lacks the adjustment that the magtube has and is pretty essential for tabor right now. The glistco will work great generally with it being a little off but that could change in the future with calibration changes ingame as well

[rough mason]

How does the ingame calibration work exactly? I can't seem to get it aligned correctly

[royal wagon]

check the pins

theres an extensive guide + video

[tranquil tiger]

Yeah it's a bit expensive for the best version but mine is coming in by Friday so I'll tell ya how it is

[ashen bone]

Has anyone in here used the bhaptics X40? If so is it worth it?

[jade drum]

how to fix ghost of tabor saying login oculus: get user proof failed

[steel hearth]

ima get the CQB Cobra

[tranquil tiger]

Nice man

[royal wagon]

go to #❓・questions, this is not the place for this

[tranquil tiger]

Good thing about the magtube is the shipping is fast asf

[flat wave]

i bought the magni stock and i cant figure out how to attach the middle piece that connect both rods together that like tightens them, i think there is supposed to be like bolts there or something but idrk im having trouble and on the instructions it doesnt really tell me anything

like i dont have those pieces in the middle like that bolt on top, it didnt come in the package either

[stoic jungle]

Made myself a diy gunstock out of string 💀 works pretty alright tho + free so

[surreal wren]

I'm getting 2 in tomorrow. Gunface will finally be here and I found a cheap ModusR on ebay so we'll see hopefully one of the two works out

[magic tangle]

Anyone know if its possible to calibrate each weapon for its own since if calibrate rifle you only do it for the ak.?

[stoic jungle]

Good question id love to know if its possible too, some smgs are way smaller compared to the mp5

[magic tangle]

Would be fantastic if we could for every weapon, as example the ak and the m4 dont match at all for me

[stoic jungle]

Yeah the mp5 and the mp7 are insanely different, its a struggle to grab the foregrip

[royal wagon]

you cannot individually calibrate weapons

check the pin for a detailed guide on how to use the calibration system, what it can and cannot do, and a video that shows the process

[magic tangle]

Okey, sad its not possible 😓 so i need to change the stock everytime i get a different weapon even its just slightly

[burnt barn]

Don’t pay attention to the weapon in the calibrate it doesn’t actually do anything. Theres a few guides on YouTube and some pinned in the channel

[royal wagon]

If you’ve been doing VR long enough you would know it’s often always been that way and that having a stock that makes these things trivial to deal with weapons of different shapes

[kind dove]

I disagree. Check out Onwards calibration for gun stocks. It’s 🔥 you can calibrate each weapon individually and in match.

Would be a huge plus for GoT

[tranquil tiger]

Gunstock out for delivery 2 days early let's gooo

[ashen hull]

How much you pay

[tranquil tiger]

Got free delivery or are you talking about the gunstock price

[ashen hull]

Gunstock

[tranquil tiger]

150 about

[ashen hull]

Sorry WHAT

[tranquil tiger]

It was the protube

[ashen hull]

Wtf

that's outrageous.. ya'll out here paying 150 for stocks

[tranquil tiger]

Lol

It's the best one

[ashen hull]

@halcyon iris just gave me the money it cost to print a stock and got two of this https://www.thingiverse.com/thing:6289919

[tranquil tiger]

It took 3 days to get out to delivery lol

[ashen hull]

$150 is literally wild

[tranquil tiger]

From france

[ashen hull]

That's mad

[tranquil tiger]

That's all 3d printed tho right?

It only costed about 150 bc of the material version

[royal wagon]

150 is a perfectly fine amount to spend on a high quality vr accessory that will last you through several vr headsets

[ashen hull]

Indeed, resin but yes 3d printed

[ashen hull]

Most will last their length, it's mostly branding etc tbh

After a certain point they're all the same

[tranquil tiger]

Yeah it's one of the most durable and adjustable gunstocks

[royal wagon]

you'll find that to not be the case in reality

[ashen hull]

Eh, realistically at a certain point they're gonna function the same right

quality sure but a quality 3d printer will make something just as fine. FYI not saying it'll be shit haha

You made a great purchase

just 150 is wild to me

[tranquil tiger]

Rn most of the cheaper ones don't have as much adjustability and aren't as durable

[ashen hull]

I suppose most printers, which the cheap ones are made with just pump them out and dont care about quality really

Like most of them are so rough looking it's like 2mm layers haha

It's like a damn razer haha

[tranquil tiger]

I just want one that'll help me not get violated in tabor and contractors

I can't aim for my life in tabor atm

[glad scroll]

If there are good gunstock calibrations then you don't need to adjust anymore no? Put it in a confortable position, calibrate it for every gun

[tranquil tiger]

Ehhh when they're more adjustable like when you can adjust the height of parts of the gunstock when you let go with one hand your gun can be in the perfect position to put a new mag in

Also I'm talking about some of those that leave your front hand open which I don't get

Like sure you have the back hand stead but your other hand still has no support whatsoever

[steep orbit]

Check out BrandoDrumVRs stocks I love the forearm grip design

[ashen hull]

Is that not you in that video lol

[steep orbit]

😎

[ashen hull]

Is this not high key advertising? 😂

[steep orbit]

Uh oh I’m just a friend helping make videos should I delete it 👀

[ashen hull]

I'm no admin brev, just looking out for you. Don't want you to catch some heat from admins or mods lol

[steep orbit]

True let’s be safe , Either way his stock is so good for Tabor. I used Kobra on my Q2 and Sinlaki on Q3. His design reminds me of the Kobra I had and love that no magnet design

[ashen hull]

Nice, lots of experience then

[steep orbit]

Yeah, I think Sinlaki could work, cause it works in other games, it’s just tabors calibration is kinda weird. Once I saw that forearm stock I wanted to, 1 get it and, 2 support it because it’s freakin sick. I’m in US and Kobra is UK I didn’t want yo wait a whole month again 😅

[tranquil tiger]

I really only got the protube because of how good it is in so many of the games

[steep orbit]

Protube is also sick just pricey

[high sky]

I’ll second this. Just got mine last Friday and am loving it!

[steep orbit]

😎🤜🏼🤛🏼😎

[safe fractal]

Are the RK grips just unusable with the gunstock? (MAGTUBE)

[solemn bear]

I believe they can be adjusted

Depending on the stock you use

I mean you could just snipe without a stock I've seen people get 100s meters without stock

[royal wagon]

you can, but i do not recommend it. every straight gun you use without the RK-A grip would be misaligned. the shift foregrip has nearly the same stats and doesn't require any such special adjustments, just use that

[glacial radish]

Is the physical stock any good like worth buying

[prime forge]

guys

i saw this pvc pipe thing

is it worth it

cause its like only 10 bucks

and my aim is in desprate need

[burnt barn]

@tranquil tiger are you also EU, yours got delivered super quick!

[tranquil tiger]

Nah Texas

[prime forge]

is a pvc pipe version worth the 10 bucks

[burnt barn]

Jesus, that really did reach you very quickly xD

[vagrant thicket]

I’d just get an aim trainer before you get a gunstock, if you suck without a gunstock you’ll probably still a suck with one

[prime forge]

should i just use any vr aim trainer

[prime forge]

should i just use any vr aim trainer

[royal wagon]

just go practice anything

[vagrant thicket]

^

[prime forge]

like just play some more

[vagrant thicket]

If you’re gonna use one, I recommended aim labs.

But yeah, just practice.

[prime forge]

k thanks

[vagrant thicket]

I was in an onward milsim for like 1 1/2 years so

I did a lot of shooting practice

[viral crypt]

Real talk. Can anyone who actually uses a cheap gunstock ( 50 Dollars max) let me know what make/model. Im using Quest 3

[winged portal]

What do you guys think its better., the ghost of tabor gunstock or the OneStock?

And the brandodrumvr ghunstock its worth it?= LOOKS QUITE SIMPLE AND NOT PRECISE LIKE A MAGNET GUNSTOCK

[fading notch]

Anyone want to play tabor on day , night, and silo

Sorry wrong server

[steep orbit]

I love the Brando stock, you can get the extra grips too if you’re worried about the forearm

But once you use it you’re gonna love it

[stark basin]

IT FINALLY FUCKING CAME

[steep orbit]

Kobra 😍😍😍

[modest tide]

how much was the unadjustable beast? looks cool af lol

[stark basin]

its like 120 or smth for the base model

158 for holo and 170 somethin for the pump action and holo

[stark basin]

its adjustable

[loud tartan]

https://youtu.be/_RGrsZTWmZ8&t=401 this is an intriguing magtube setup. Instead of dealing with the front magnets or having to click the front tube up or down for different guns, you basically kinda just freehand your foregrip

[dusty valve]

Why there is a mag and a scope?

[stark basin]

the mag idk but the holo is an addon and its for looks

[tranquil tiger]

Anyone know a good way to setup the magtube

Cause I can't find a good position to put everything at where it's good lol

[warped iris]

I recommend a little bit of velcro on the forward grip.
Helps push in the grip button on the controller

[stark basin]

wym

[royal wagon]

type in !magtube on my twitch channel and you'll get a few vids that show you how I recommend setting up

[tranquil tiger]

Quick lil plug lol

[royal wagon]

the third one is to a video that is posted here with the tabor gunstock calibration guide

[warped iris]

I've had issues with the front piece not pushing in the grip button. small patch of velcro helps to press it all the way

[nocturne flax]

Follow it and I promise you’ll aim will be centered and precise

[vocal plaza]

where do I buy a gunstock

[royal wagon]

protubevr.com

[tranquil tiger]

Got mine

Gunstock calibration in games take a while tho

[vocal plaza]

$113???

[royal wagon]

i recommend full carbon

[tranquil tiger]

This version right here is 150 lol

[tranquil tiger]

^

Except I didn't change cup colors

[safe fractal]

WHY IS THE STOCK SO HIGH

[tranquil tiger]

IT AINT BAD

[safe fractal]

fair

[tranquil tiger]

ITS COMFY

[safe fractal]

I’m short as all hell so yea

is it protube?

[tranquil tiger]

Yeah

[safe fractal]

I got the same one, so damn expensive

[tranquil tiger]

Yep

[safe fractal]

I was trying to add cushion to my stock

[tranquil tiger]

I wasn't gonna spend extra for the colors lol

[safe fractal]

Mine was around $200 usd

[tranquil tiger]

Damn mine was 150

[safe fractal]

ah

[tranquil tiger]

Came in 5 days

But I ordered on Saturday aswell

[safe fractal]

Ohh mk

Also be careful, the gunstock will be kinda annoying to calibrate

[tranquil tiger]

Yeah ik

Saw the video

[safe fractal]

I want them to update it already

[tranquil tiger]

Fr

Is it next wipe?

[safe fractal]

Probably, next wipe is gonna be full game release. Can’t wait to hunt down the Pavlov Shack kids

[tranquil tiger]

Lol

Doesn't it transfer over from app lab if you already have it

[safe fractal]

I don’t think so, I still have the app lab version but the full release shows up in the store

[tranquil tiger]

But it's exactly the same

[safe fractal]

True, haven’t played in a while so I wouldn’t know.

[tranquil tiger]

I haven't done a proper raid in a minute

I was waiting for the stock so I don't get used to freehanding

[safe fractal]

I’d say do some training matches to get used to aiming, do naked runs to adapt to quicker movements and get used to point shooting, etc.

[tranquil tiger]

Yeah

Gotta spend the time to calibrate first

[safe fractal]

It’s pretty inaccurate, I’ve found that the guns need to tilt slightly upwards in the calibration menu

[frigid breach]

Like the way he set it up, idea is kinda similar to the Ultistock/Ultibrace

[hollow zinc]

Actually yeah I need to circle back, I'm making him a version of mine to address his needs.

[mighty grove]

how do you grab like the ladder and stuff with a gun stock??

[tranquil tiger]

If you have a magnetic just take them off the gunstock lol

Otherwise idk

[hollow zinc]

Mine is super light, you just keep it on. 100x faster than clipping out

https://youtu.be/T_alHJ402mY?si=mfPaeVaG0mh5Zqff

[hollow zinc]

See above

[hollow zinc]

See above

[surreal wren]

Well much as I wanted to love it, it became immediately clear that the gunface is not gonna work for me. The magnet in the center is too weak, and the 3d printed controller clamps can't be tightened down enough to to keep it from flexing. Good idea but not so good execution

[tranquil tiger]

Right now I just gotta get used to my gunstock

[gilded juniper]

should i get magtube or mamut apto3 wasp

[gilded juniper]

well ofcourse there are factors, i just wanna know which one is for me

[tranquil tiger]

Magtube let's you adjust a lot

[gilded juniper]

so does the mamut

from what ive seen

magtube vs mamut

both are premium options, just unsure which one i should go with

[tranquil tiger]

Yeah idk, the magtube is a bit cheaper tho

Never seen anyone use the mamut

[gilded juniper]

true thats its less popular but still seems like a solid premium choice

as its all machined aluminium and carbon rods

[obsidian forge]

would you rather lug around a hunk of metal or a hunk of plastic

ask that and pick

[gilded juniper]

metal, i dont mind weight

heavier, more immersion, feels more rigid and stronger

[frigid breach]

Some guys will say the weight makes it feel more immersive and realistic 😎

[gilded juniper]

which i just said

since magtube is plastic, i think im going with mamut, im also a fan of the magnets how they are made, flat mountaing rather than from sides is bigger area to hit the magnet

[frigid breach]

Different folks, different strokes. Ask 10 guys here, you'll get 11 answers and a guarantee someone will preach the magtube

[gilded juniper]

magtube is very popular and widestream so ofcours more recomendations but the mamut seems also high quality due to its literally aluminum molds and carbon fiber rods

(not saying magtube isnt high quality, just saying mamut seems also like a solid choice and ofcourse it all comes down to preference)

[violet depot]

I have a different stock "unistock mk1" that is all aluminum and I like it much better then the old plastic one I had. Feels much sturdier. Have had for over a year with not even a scratch on it and definitely banged it around alot..but like everyone else said it's just preference and how much you wanna spend

I don't find it much heavier either

Tho iv recently started not using any gunstock and I'm starting to like it better👀

[tranquil tiger]

Magtube is actually pretty light

At least if you get the carbon version

[scarlet mantle]

anyone found a gunstock that works well with angled forgrip?

[modest tide]

apto was 200 lol

[modest tide]

I use the mamut wasp 3 and its absolutely next level

[gilded juniper]

im unsure if i wanna get the mamut apto3 wasp or the protube
protube is cheaper but in mamut feels tempting due to it using all metals

[gilded juniper]

whats the experience with it?

[modest tide]

The mamut is the premium for sure imo, 10/10

[gilded juniper]

how long have u had it? how good is it with customazation?

how strong are the magnets?

[modest tide]

A couple months at least, I have zero issues with it and works amazing in tabor, I dont even use gunstock calibration and its flawless. Magnets are very strong, customization is endless really

ive owned many stocks, this is my fav

looks sexy af too lol

[gilded juniper]

welp i think ive heard enough

im getting the mamut

[modest tide]

Highly recommend, the inital process is tedious to put together but once locked in its solid to say the least

[gilded juniper]

also about the gunstock calibration, what kind of general setup do you have on the stock? like rods angle n stuff

[modest tide]

i posted a pic let me find it

[gilded juniper]

i dont mind building and tinkering, ive taken apart my quest 2 to the motherboard to deep clean (and fix the sensor to detect my presence)

[modest tide]

I totally get that, I really enjoyed putting it together for sure lol

#🔫・vr-gunstock-chat message

the butt pad can be slick as its metal so i used a crutch rubber ending, woked flawless for grip on clothing

[gilded juniper]

looks great

imo i like the design of the mamut in the magnet moutnaing, bigger area of contact

[modest tide]

exactly, i felt the same

[gilded juniper]

the protube is indeed also great option but it all boils down to preference

[modest tide]

truly, both are great!

[gilded juniper]

essentially the mamut (apoto3 wasp) and protube (magtube) both amazing it all boils down to preference

heavier metal feel gunstock? mamut, light fast easy gunstock? magtube, and many more factors

whenever i recieve my mamut apto3 wasp we should def do duo in tabor, (the mamut apto3 wasp duo)

since im buying the full quest 2 set of the mamut, it will also just look sick on teh controllers and give protection due to the crowns and grips

greatly designed imo

[steep orbit]

BrandodrumVR stock

[scarlet mantle]

do you have a link to it?

[steep orbit]

https://www.etsy.com/shop/BrandoDrumVR

[white anvil]

Are gunstocks and grips just not really compatible? Every gun that has a grip on it, either I can't grab my gun because the front controller won't get the grip indicator, or when I do grab it, the gun will then be angled upwards because it raises the front of the gun by however long the grip is.

I hear they reduce recoil so I don't want to be at a literal disadvantage

[oak oxide]

Anyone have an old gunstock they are not using anymore and want to sell it to me?

[oak oxide]

Turn your grip sensitivity down and it will snap from a longer distance?

[royal wagon]

no you just dont have your stock setup right

ive used a stock with this game since the closed alpha over a year and a half ago, and it always worked properly

[white anvil]

Even so it still changes the height of the gun, it literally raises the front by 2 inches as I grip the foregrip, calibrations have been done, my front hand rests right under the barrel of a gun on every weapon, unless I make it so weapons without a grip sit unreasonably high.

[royal wagon]

if you have a non-adjustable stock you are going to run into issues

yes, it does raise the height of the gun

[white anvil]

Yea mine is non adjustable

[royal wagon]

non adjustable stocks have never been recommended

the very first commercially made stock 7 years ago was fully adjustable

[white anvil]

Well I didn't wanna buy one so I made it, just not sure why this is the only game that has the grip physically raise the gun when I grab it, yet without a grip it doesn't matter where my hand is when I grab it, it will keep the gun straight, my hand will teleport to the gun instead of the gun raising to where my hand is.

Into the Radius, Contractors, pavlov, and breachers, don't have this issue, they all change your hands location upon gripping the foregrip, instead of misaligning the gun.

as for other games those are the only fps games I play.

I guess it's not the biggest deal, I can just cope with not using foregrips, sadly after trying a gunstock, I am 100% never going back to freehand which is kinda saddening but also I adore this gunstock

[royal wagon]

if you made it update the design to include height adjustments between controllers

[white anvil]

Idk how I'd do that, it's basically made so the rear is magnetized into place, and the front controller is just placed against a brace while my hand holds said brace, I guess maybe I could extend the brace upwards but that would likely get in the way of holding the grip button.

Actually update, I'm realizing I'd need to actually extend the front grip down instead of up, which then brings tracking issues into the question

So far if I hold a forgripped gun with my front freehand I can just about have the controller right where a controller would normally sit on an undermounted gunstock.

but mine is an overmounted stock so unless I completely redesign it I have no clue how I'd add both capabilities for grips and ungripped weapons.

Why can't we just have a seperate gunstock calibration for foregrips, I saw a few other people mention this idea aswell.

[royal wagon]

maybe we will one day, but that day is not today

[tranquil tiger]

I was gonna get the raidr gunstock but I wasn't gonna wait that long lol

[proud oxide]

I’m ok with waiting, but the lack of info on it is what’s holding me off on committing.

[tranquil tiger]

Yeah kinda why I went with the magtube instead

[nocturne lotus]

Just ask away if there is anything that's unclear 👍

[modest tide]

super down my friend!

[shy mulch]

Have you had any issues with lining up the sights on guns that have the rk angled grip?

[gilded juniper]

i got some bad news (well right now) im unable to purchase the mamut apto3 at the moment due to me having too low money atm but might or might not get more soon

other than that i wouldve bought it rn but i cant atm, we can still play duos/trios

ill still have a stock, jut an old 3d printed one

[nocturne lotus]

No, but I need to adjust the front hand, but that's pretty quick and hassle free

[royal wagon]

rotating outwards is not that hassle free

RK-A is the one that pushes your hand to the side

[royal wagon]

RK-As are not recommended with gunstocks, you will have to do some pretty significant changes to the front hand rotation to the inside which will then make every gun that doesnt use it be off by quite a bit

the shift foregrip has nearly the same stats and no such problem

just use the shift foregrip

[hollow magnet]

any news on calibration update?

[young kindle]

What’s the best gun stock for a beginner?(also for some one who hasn’t use one before and has barely any money)

[modest tide]

your best bet will be innovation lol

[young kindle]

Thanks

[bleak tulip]

How to calibrate a gunstock in GoT?

[hollow zinc]

Cr grip or perhaps my product. Both relatively affordable https://brandodrumvr.etsy.com

[royal wagon]

check pins in this channel for a written guide as well as a video

[burnt barn]

How is the magtube for ironsighted guns like the akm for example ?

[royal wagon]

same as it is with everything else, fantastic

[burnt barn]

Should be arriving today 🥳

[loud tartan]

Fine as long as you commit to using iron sights for that gun class. Otherwise they'll be at different levels, basically an issue with any attachments that will affect your gun/optic heights.

[burnt barn]

From what I understand I should be able to just notch it up a few taps in calibrate if I need to use a sight. Or down

[loud tartan]

you want to go into a menu and recalibrate during a raid if you swap guns with sights vs optics within the same gun class?

[tranquil tiger]

W

Got mine yesterday

[loud tartan]

imo, that's too much work. i just assume i'm gonna use optics with my assault rifles. I think you can also notch it properly, grab the gun,then attach the cup and it might align right. but it'll make your ads slower if you weren't already holding the gun with the foregrip and someone pops out

[tranquil tiger]

Haven't played much with it

Definitely find it more stressful to reload a gun during a fight

[modest tide]

you cant in raid lol

[hollow zinc]

You should check this out https://brandodrumvr.etsy.com

[tranquil tiger]

Already bought a magtube lol

[sweet vine]

what's the difference between the regular and XL?

[hollow zinc]

Same product but XL is for larger gamers. Like over 6 feet

I'm 5'11" and use the regular

[tranquil tiger]

You're working double overtime in this server and contractors showdown lol

[hollow zinc]

Haha, just checking in here and there

[surreal quarry]

Shorties I’m 12’9”

[lusty saffron]

r the g.o.t. stocks being delivered?

[tranquil tiger]

Not yet

[tranquil tiger]

These gunstocks are so hard to get used to

[frigid breach]

Active consumer engagement. I'm sure buyers will appreciate being able to reach out directly to a seller

[zinc meteor]

Yeah ngl, I've looked at aloooot of gunstocks and yours looks like it could take over the market! Well done dude

Will be copping at the end of the month!

[tranquil tiger]

I mean if he's getting the bag I'm not blaming him lol

[soft epoch]

@lethal sinew its dons desine i moded it a bit works very well!

front rail is moveble to fit any gun

[lethal sinew]

Front cup isn't meant to be fixed. Tabor has some weird geometry.

Edit: did not realize the front slides. That's dope

[soft epoch]

ya the video was amazing so easy and works so well

[lethal sinew]

Make sure to punch out a tiny hole near the base for the lower led in the q3 controllers

Ty Volkaniery