#🔫・vr-gunstock-chat
1 messages · Page 27 of 1
Stability but if it’s not with magnets u might have a struggle at first with organizing bags and shit, also why I prefer without stock
whats a good but afordibal gun stock for the meta quest 2
@final phoenix I got u right here. I sell mine for 34.96 check ur dm I’ll send you some info
@misty quiver
Hey so I want to buy a magtube and have found an amazing Deal for €40,- but I dont have the same Controller as the cups support
Can I change these Controller cups and if yes. Can someone send me a link where to buy them?
what cups do you need
(what controllers r u using)
if it works it works and you dont ask questions about why it works
ask any engineer and they will agree ^
let us know
Ight
Does anyone have some magtube gunstock gameplay so I can see if its really worth it for a game like ghost of tabor where u loot alot?
Or would yall just recommend that I should wait for that official gunstock
I’ve been using protube products for almost 7 years, you can find plenty of video on my channel
I prefer a butt and cheek rest, and fully adjustable
So ur educated guess would tell me that I should go for the protube? xD
Well. I think he has a bias on Protube products. So yes, he would most likely tell you to do so.I’d watch his videos and see if they are for you. If not. Usually there are plenty of there people on here that recommend different products.
Yes. I can adjust it to fit every gun I would want to use in the game, and I have a very fast cheek weld from thousands of hours of use
pro tube is a solid company. just do your research before you buy anything
I have a bias on good products, if it’s good I buy it and use it
Can’t disagree with that. Just affirming that there is in fact, a bias.
Isn't that the whole point of a recommendation though? 😛
To recommend something you think is good
Ig yall have converted me to the magtube. Even better choice if u take into consideration that I have found a great Deal for €40,-
Yes. It is. But a customer of 7 years usually hasn’t looked at other options. And often with good reason. Perhaps Joa would not fit well with protube or they may find protube to be the perfect fit.Either way, they should consider other options first to have a wider world view in order to make an educated decision on what product to buy.
^^
That's for Joa to decide, not ragesaq to recommend
it all comes back to jsut do your own research. recomendations are good but just do your own research
If they want to wait for more recommendations from other people, that's totally up to them
Of course.
I’ve looked at other products for VR accessories, and in a few cases I’ve designed my own
Yea ik. But i'm not really in that whole gunstock bubble and just want something to make my ghost of tabor gameplay more fun and immersive xD
There’s a good reason I’ve stayed with protube for my gunstock for 7 years
That’s great. But it wouldn’t be entirely wrong of me to assume that after considering everything. And going with Protube. You may have not kept up with what other companies have to offer. Knowing that protube has consistently offered a good product.
Does he have to tho?
What would you recommend?
He likes what he has because it works. He isn't getting paid to recommend gunstocks to people. He isn't obligated to be familiar with or experienced with everything on the market before he's qualified to recommend what he has 1k+ hours on.
I wouldn’t make so many assumptions
My only fear is that the gunstock is going to be in the way of doing other things like looting or throwing grenades or simple things like waving to my friend yk what I mean?
Well, that’s just the problem. I’m more of a free hander guy. So I don’t actually own a stock. Or know what’s good. I just like to make sure that people consider other options before buying a product that they may regret later. I think if you looked at the protube product line. There could be something for you, as there was something for Ragesaq. But who knows. Maybe Bowk is more your thing, or even the upcoming RAIDR, designed by, Scott himself, GoT’s CEO.
That's the big benefit of magnetic, because it allows you to do this and therefore doesn't get in the way of doing other things. Practice makes perfect. It may take you some time to get used to it, but the time and effort definitely pays off big time
There's no specific set amount of time it takes everyone to get used to
Varies from person to person
If you want to just get used to knowing where to put the controllers on the stock when taking them off, takes less than a day maybe a few hours for most people. Beyond that is up to you and what you want to do with it and how you go about it. There's no set guideline or 'training regime' to do so, its just playing with it and getting used to it
But the same could be said for learning anything new or using anything new, so it isn't some gunstock specific thing
And you do that by having like a type of strap which keeps the gunstock on your body right?
If you want to remove both hands from it at the same time yes
For example, ProTubeVR's MagTube comes with a 1 point sling for free, and you can select a 2 point sling for extra if you want
But it seems to be to not be that beginner friendly because u have to screw something in it to change the preset right?
That's just part of using it though. Is it 'beginner friendly' to have to mount a racing wheel to your desk and plug it into your pc?
You line the physical stock up, to match where your controllers attach to the gun in game, so that you can aim with it
I mean thats a bit easier and doesnt require Tools yk
So you want as easy as possible do nothing on your part?
Fully adjustable stock maybe isn't for you then. There's tons of 'fixed' stocks that are on one tube or angle that don't adjust
The major benefit of a fully adjustable stock is that no matter what game or what gun, you can make it line up well without having to rely on the game to provide ways for you to do so (such as gunstock calibration)
No it isnt like that xD Im afraid that its going to be too complicated yk
There's tons of guides on how to do it
in video format
ragesaq has some good guides not only for setting up the MagTube, but setting it up in Ghosts of Tabor
Do they show how to align the gunstock with the guns in ghost of tabor? I mostly use one type of gun anyway (the m4) and there are similar weapons.
Ohhh okay
Yup he would have you covered
And if you have any questions about it I'm sure he'd be happy to help
should you get one
Appreciate you and ragesaq. Thank yall
I think ima get one tmrw
https://www.protubevr.com/en/product/169-magtube-gunstock.html Here's our MagTube,
And here's discount codes you can use to make it cheaper: https://www.protubevr.com/en/content/85-coupons-vouchers-codes
The worldwide reference of VR Gunstock simulator. Fully adjustable, lightweight, Esport ready. Compatible with Meta Quest 2, Valve Index, PSVR2, HTC and many more.
If you're in USA and plan to use a debit or credit card, make sure to select USD as your currency. And contact your card provider to ensure the transaction doesn't get blocked by the anti fraud protection service most card providers offer/have enabled by default when making purchases from outside of the country.
Or if you wanna use PayPal, leave it on Euros, and you won't have any issues
Do you know how long the shipment times are in Europe (Austria) or do they vary alot?
Super fast. We ship from France, and MagTube gets free DHL Express 5 day international shipping. You'd probably have it in 3 days or less from time we ship it out
Some places in EU even get it same or next day
protube doesn't have a split stock option do you?
We do not have a stock that is a tube for each controller that detaches in the center if that is what you mean. We do however have two controllers attached to one tube, and just one controller detaches: https://www.protubevr.com/en/product/178-starter-short-gunstock.html
You can also upgrade it with an optional shoulder stock upgrade
yeah wouldn't be too much different from the one i made in terms of comfort then lol
having a stock is nice, but in tabor having the whole thing in one piece just feels kinda awkward specially for looting
We've had different variations of what we now offer as the Starter up since 2017 or 2018. It was actually made with the help of some of the OG Onward esports players, because they wanted something closer to free hand than the MagTube that still offered some stability
The Starter tube is fairly short, so you definitely don't lose out on any virtual interaction mobility
short feels a bit cramped though for me, i made a bunch of different lengths while i was figuring out if having a stock was even worth it for me lol
We do offer tubes on their own in spare parts should you want a different length. You can also source your own, the outer diameter for our products is 18mm
my homebrew one isn't as good as one with proper controller cups and thinner tubing but it did at least let me know what i like
The length of tubes we offer are basically just the ones we have on our existing products. But you could also just cut a longer one down to length if you want something we don't offer
If you do plan on actually cutting, make sure to research what is required for whichever material the tube is.
https://www.youtube.com/watch?v=JqMz-i5TAP4
https://www.youtube.com/watch?v=QMtzgw-zgqY&t
For anyone curious, here's a couple video guides we have up for the Starter. One is for changing which hand is stuck to the stock (you could also have the supporting hand be the one that's on the stock, and just remove the trigger hand from it this way if you want)
As well as one to make the cup that is bolted to the tube magnetic (mostly used if you get the shoulder stock upgrade)
💥 This video shows you how to switch hand laterality on your Starter VR short gunstock.
▶ ANY QUESTION?
👾 Join our official Discord - https://discord.gg/kAsGHs2
▶ FOLLOW US ON SOCIAL MEDIAS
Instagram - https://www.instagram.com/protubevr/
Facebook - https://www.facebook.com/ProTubeVR/
Twitter - https://twitter.com/ProTubeVR
Twitch - https://...
💥 This video shows you how to upgrade from fixed to magnetic cups to hold your controllers
▶ ANY QUESTION?
👾 Join our official Discord - https://discord.gg/kAsGHs2
▶ FOLLOW US ON SOCIAL MEDIAS
Instagram - https://www.instagram.com/protubevr/
Facebook - https://www.facebook.com/ProTubeVR/
Twitter - https://twitter.com/ProTubeVR
Twitch - https...
if i was gonna build another one myself i'd probably just buy some controller cups that clamp onto a tube and use curtain pole or similar, but the being able to split your hands part without having to drop the stock is what's most attractive to me atm
For sure. We do offer discounts as well https://www.protubevr.com/en/content/85-coupons-vouchers-codes
And an extensive 2 year warranty
https://www.protubevr.com/en/77-spare-parts Here's all of our spare parts, if you do want to go the build your own route
for now i'm just waiting to see what the tabor one comes out like before i go planning a build or anything
Makes sense
cause that splitting thing just looks really useful
good for games where shooting isn't the only thing you're gonna do, but you wanna still be able to shoot
Yeah the GOT one is definitely designed specifically with GOT in mind, and its use case outside of GOT is also pretty large
If I understood right it doesn't actually have any cups for specific controller brands, and instead has a universal clamp thing that holds all controller shapes somehow
Which if so means quality of use may vary between different/more unique controller shapes
I've only seen some pics of it, and saw what Scott was saying about it right after the very initial tease
yeah that's why i'm probably gonna wait around a little bit to see how it handles when people review it
there's always the option or replacing the cups though
Im hoping the protube stock will slot onto the got base
pretty sure the tubes are the same diameter
Our tubes are 18mm outer diameter. If the GOT stock is same tubes as other Mamut it should also be 18mm afaik
This would also mean you could easily do things like slap a ForceTube on, or a 1 point sling, etc.
@wild ruin btw are the quest 2 cups gonna be the same as quest 3 or do I need to order new quest 3 cups for my magtube?
Ahhh okay so I need new ones due to the new sensor am I correct?
read near the bottom, explains better for what u have
Will most likely buy some q3 cups then. Hopefully French customs don’t take my order again 😭. They held my stock for a bit last time for some reason
did u choose DHL Express?
Not to sure tbh it was about a year ago. Got to me eventually and it’s held up very well for the amount I have used it
DHL express is super fast, completely free over 100 euros orders, so free for things like MagTubes, DHL have their own customs offices so it passes through customs leaving and entering fairly quickly
What is the best Gunstock on Amazon? I might just ask for Amazon gift cards for my birthday lol
Most likely did not use that then as they seized my package for a bit until they realized it’s not an actual gun 😭. But yes it’s a great product imo and I love it to bits. No clue how that 3d printed material is so sturdy and reliable. Glad I bought it
https://www.protubevr.com/en/content/1-shipping-and-duties for more info on our shipping options
here's page for Quest 3 cups https://www.protubevr.com/en/product/12-cup-for-meta-oculus-quest-3.html
if you want pro straps as well you can select them on this page as optional add on
we started shipping quest 3 pre orders this week
https://www.protubevr.com/en/content/85-coupons-vouchers-codes lastly there's a quest 3 coupon code to save 10% that expires end of this month for quest 3 pre orders
Probably will put an order in for them in a few days then. I’m addicted to using the stock I need them cups 😭
If you pay for DHL express, you could have your cups sometime next week
Will end up doing that then most likely. I just realized my strap has somehow twisted itself and idk how
What would be the best Gunstock on Amazon?
Don't forget to mention the HMD you use
Best case just disconnect 1 point from the stock, worst case you would have to unloop from that side and feed it through again
It’s gonna have to be the worst case sadly 😭
pay really close attention to how it goes in as you take it apart, so you can put it back in
Will do. No clue how I’ve managed to get it like that in the first place tbh
Doesnt have to be perfect in any way! Just has to work! Remember, people dont see the gunstock in game! lol
And you can always adjust to make it better!
Hey jon, i have a magtube and i was wondering if you knew how to fix it being "off" when in vr. What i mean by that is if i was to aim the stock naturally, The game thinks the stock is about 3-4 inches to the left of where it is in real life/comparison to my hands. Almost like i would need a slightly bent tube connecting to the part that touches my body.
im using index btw
https://youtu.be/yoV8TQIEUYo?si=-2oHRxmPGrYOZMae
https://clips.twitch.tv/PricklyTubularBarracudaPicoMause-vxFUP585vkUbiZyi
Follow these for setting up. Sounds like an issue with SteamVR. Try resetting roomscale and see if that fixes it. Or you can get OpenVR Input Emulator to force adjust the offsets back to normal
If you are looking to get the most out of your Protube this guide will help you adjust your stock to give you an optimal ergonomic fit in most games. This guide is valid for the Protube or Magtube with the Rift, Rift S, WMR and Vive controllers.
Using this technique I can create a protube setup with Magtube and swap the controller cups between...
I haven't personally seen such an issue so no clue of a perfect solution sorry
Also make sure to reset any adjustments you made to your controllers in game, such as in the game settings or the gun calibration. That might be impacting it.
All good! ill take a look at the videos i just saw your name in here and figured i would ask. My hand tracking is fine its just the fake gun stock in game doesnt match the real physical one so i have to manipulate it weird.
pinned messages for how to use the calibration
or follow the videos to not have to use it at all
I've played around with the calibration a bit, its a shame they wont let you do it anywhere but the bunker its so dark. and thanks ill take a look at them now
The MagTube is designed to be able to adjust for any gun in any game. ragesaq's twitch clip works for most guns or can quickly adjust to most guns in GoT
for minor adjustments beyond that I'd look into openvr input emulator to tweak controller angles and offsets outside of the game, and save it as a preset to load when running the game
at least that's how I would do it 🤷
oh yeah it definitly gets its job done. I was just asking to make it just a little bit better for me. Ima go ahead and watch the videos you were telling me about to see if i was just being dense. Apprecaite the help.
the main video shows the methodology of approach to use when aligning any gun to the gunstock to fit your body etc (everyone's arms are different lengths, everyone has different preferences, cheek weld, etc.)
Which direction is it off?
so if i place the stock into my cheek/arm. the in game stock is sitting probably on my far side of the arm tricep area. If you imagine a clock. it feels like when i aim the gun. its pointed at 11 and 5 not 12 and 6
in game? i dont use the canted because my hand wont grab it when i have it set to other grips lol
i do use the calibration because that fixes my ads.(needed to bring the barrel slightly up to make sights line up) but it only lets me adjust one plane
it alows me to go up and down with the gun entirely, and change the tilt vertically but not horizonally.
So the grip point for guns is slightly to the inside of the hands
You have to actually bring the cups rotated outwards a tiny bit
i think they are slightly rotated tbh
i did that cause it lessened the angle in which i had to put the stock into my body, my left hand is offcentered on the stock. it made grabbing guns and aiming better
its just not quiteee far enough for the canted, when i make it far enough. i cant grab other grips and then miss some guns grip points
im messing around with it now in the bunker trying to see if its somthing dumb ive just been overlooking this whole time
clear your calibration and see
i think you can alter the horizontal alignment if you do not have the controllers in the stock when you hit calibrate
i cant figure out how to do what you mean. theres no setting for me to do that and nothing changes when not attached to the stock
oh just offset my hands in reallife and that will follow with the calibration?
i think? im not sure. i always make sure to pull both triggers to save the calibration with my controllers in the stock
chat later, im going live right now, stop in if you want to chat calibrations
What would you guys say the best quest 3 compatible Gunstock on Amazon would be? If there aren't any good ones there, where would I get one?
Anyone have a preferred 3d printable gunstock?
So if the cups fit quest 2 controllers they will fit the quest 3 controllers
Ooh, that's nice
I use the istock half stock it's 3d printed idk if it's open source or not
does the Ghost of Tabor gunstock come in 2 pieces with the end
Do u guys have problem with loading mp7/mp9 when using gunstock
Cant get the mag in the right hand controller blocks it since mag is inserted into the grip
Depends on the gunstock
Jon If you're going to suggest people cut carbon fiber you better let them know how dangerous it is.
The dust from CF is extremely hazardous for the lungs and causes tons of skin irritation. It can be done safely with PPE but your customers should NOT be performing this without PPE.
Anyone interested in cutting or working with carbon fiber do yourself a solid and google search "carbon fiber dust safety"
Top Result: "Protection of eyes and throat from carbon fibre dust is paramount. Users must wear full goggles and a dust mask to prevent dust inhalation. Dust particulate masks must be fit tested to the individual. Protective clothing should be worn whenever dust is created (such as while machining)."
We work with carbon fiber a lot and it needs to be treated with respect or you're going to have a bad time.
When will the ghost of Tabor gunstock come out
whenever it's ready i guess
Good call, changed it.
Welding has taught me not even my PPE helps save me 😞
Have had welders flu twice this month
Yea, I hear you. Wish I had taken PPE more seriously as a youngster.
Virtual stocks are for the weak
If you want a cheep but good one dm @remote tiger
are ali express gunstocks viable?
Look at aimbot brand on Amazon it’s 3d printed and works amazing if u are looking for a one controller stock
Do you have a link? I can't seem to find it on there.
I’ll find it for you hold on 1 second
Do u have a bujet budget
Idk, I'm basing it on Christmas, I'm just going to ask for Amazon gift cards lol
You can buy anything with amazon...
Onestly it’s kinda up to you idk if you would like it or not it’s a one handed stock
Would u like to see
Sure, seeing is good I still might not buy though
Mines a little used but that’s it
Ah, okay I'll probably try to find some kind of two handed stock
Yeah, thanks
The one 3d printed one I sent made by @remote tiger is 2 controls and $35 usd I have a pic of it if you would like or just ask toxic
w
Would you share pics of that stock?
Yea look in dm
@pure crown you have one im looking at geting one
You can buy one from @remote tiger just dm them but I can send you a pic of one
im looking at geting one of his in november
@pure crown I appreciate you!!
@dry sorrel @bitter lantern I’ll send you guys some info!
No problem mate
returning after a couple months, has the gunstock calibration been fixed?
It's the same.
Big shoutout to all of my Discord members! I love playing with you guys. Also big shoutout to Brandon for sending me the Ultibrace Gunstock. Really enjoy this product and I plan on using it for all things VR!
=Ultibrace VR Gunstock=
https://www.etsy.com/shop/BrandoDrumVR
=Join My Community Discord=
https://discord.gg/m4kKyDNdrk
=Chapters=
00:...
Y'all are gonna love this
This is my gun stock I made it myself🤣☠️
It works pretty great ngl
very well then
Rate my diy gunstock just coat hangers and cardboard and duck tape 🙂
still trying to figure out how to get reloading to work correctly with it
Thanks for the free pics
Bro what?!
Uhh
Sus
Cap
Na
Capper then cat in the hat 🧢
I forgot he existed
Same
How does one get a role
Thank you bbg
Do you mind if I copy your design and make my own
Naw I don't mind send me what u come up with I found flipping it upside down with GoT is the way to go to be able to reload also so keep that in mind u need your controllers to be on the low side of the hanger so u have space to reload
smart, but... reloading?
we tried to do the same thing for ClayHunt VR. but, we couldnt reload the gun so it was a bust.
if it works it works right
Might work idk
Anyone know how to make a gunstock out of cardboard
no grab a plank and then the toilepaper thing whem done and then tape it all togeter i made it last year still works lol
Here me out, just buy a cheap airsoft ak with a folding stock and take the stock off than bungee tie it to your controller, it works great you'll even have what you need for a stock.
just ordered new cups for the protube, i'd highly recommend although it is expinsive.
How can you recommend something you haven't tried yet?
I added a cheekrest to my newer one
anyone have a review on this?
If you put a second front hand magcup on your protube you can have 1 setting for mac10 and similar short guns and 1 setting for m4 and similar long guns
In the video they have, my dude puts the butt of the stock legit ON his headset lolol
it’s meant to be a “facestock” i’m pretty sure
they have an option for a shoulder aswell
Interesting. First time I've ever heard of such. But I guess it's pretty creative so props to them lol just funny to see
yeahhh but i’ve heard bad experiences with it
the magnets are weaker than they should be and the face part of the stock melt from the heat of a quest 2
only hearsay tho
Why are my hands doing that
dunno
the angle the cups hold your controller is the cause of that
Also no hole for rear ir light
Yes
im getting my first gunstock do you guys have any reccomendations?
There's cws that's coming out there's protubevr and sanlaki depends really what's your headset?
quest 2
@rare otter I’ll send you some info to ur dm. I sell them for 34.96 and offer free customizations and personalizations take a look
I suggest buying this one it’s by MAGNI STOCK + it called the GLISTCO (not sponsored)
72 USD
I have it and it’s great but the orange tip ended up coming off and I lost it
So now they won’t know if the guns fake /s
Yet again I raise you this. . . It cost me like 10$ and it is way easier to use pistols than those I bought one for like 70$ and I used it for like five minutes I hate them.
But what works for u works I'm just saying
did u just rip a stock off a gun and make a gunstock???
A.k.a. a real gun stock
Like it?
Yeah no shit 💩
Scott said that he wants to have around 12 maps
I litterly was just eating that ramen
🔥🔥
Guys u like my new gun!
Specifically an AK 74 U I can't stand AKs they are trash as fuck. . .
Recoil go brrrrr
And people argue that they perform better than ars but they don't. You have to maintain an AR you can abuse an AR
U cant put any grips on a ak either
Yeah I hate it, thing is I prefer 7.62 for home defense I even got a custom M16 made chambered in 7.62 for my house and I have another for long range, and hunting chambered in 5.56
There the Romanian dong but that thing absolutely sucks it is way uncomfortable
BRO WHAT!! Chillax bruh ur like scott😹😹
I don't know who Scott is so idk what you mean
Oh I didn't know you meant him, never met him but he seems cool
I'd love to meet
He has over 60 guns in his housr
Last ama he said it
He had 3 guns just sitting on his desk lol
I have many but I have a very specific taste I fire arms
Bro how old are u
23
Just as the foundation fathers intended
Stay loyal to the ghost
i made a gunstock out of pvc pipe how to i keep the controllers snug inside of the pipe
how do you loot with that
It's got a sling so you can detatch the controllers via magnet couplings to the stock itself and go about your biz with the sling just hanging around your body.
Did u see the magnets that come off
ProTubeVR MagTube 😄
thinking of buying this, but when i get the quest 3, can glistco just sell the quest 3 cups to be compatible w the Q2 stock?
Hey mate. If I was you I would wait for Combat Waffles GoT own Gun Stock. It looks the Dogs Bollocks mate with magnetic splitter in the centre of the rod so you don’t have to fuck around trying to put the controllers back into their holsters. Just magnetisedthe two sticks and boom off you go
Check the most recent AMA and Scott is plying around with it in his hands for the first 10 mins and gives a little demo of the product.
hmmm depends on the price
Well the one you are looking at is 70 dollars. Scott said the base one is about 60 dollars going up to 100 dollars if you want to get the extended shoulder stock etc
So even the basic version is potentially better and cheaper
100 bucks for the version ith shoulder stock??? damn....
I made the mistake of ordering myself a gunstock 11 days ago. Wish I hadn’t now knowing this GoT stock is coming
Check announcements I believe it is 3 or 4 posts up
idk man... u can get the full stock for 80 dollars from @faint wigeon
same features and all
Only issue for me would be the (shoulder) stock bit as its more body on that one. But yeh seems to be a very similar product to what is being produced. Only way to tell will be to wait for GoT’s to come and have someone do a comparison
regardless, i need me a good gunstock that wont take a month to get the UK
or paying double for good shipping
Same predicament mate. I bought one 11 days ago. It ain’t getting here till 11th November lol
Annoying that they probably get made in China. Shipped through Europe then get shipped back from US to us lol
Both Mamut and Protube are in EU though.
yeah except they are both almost 200 usd
Weeeell, not the GoT stock
which will be 100 usd w full stock
True though.
Still, you get what you pay for.
in all honesty, i'd rather the glistco stock for 80 usd
which comes out to like £80 with shipping
Yeeeah $100 gets you two metal tubes, magnets, oh and the luxury of a bent slightly thicker coat hanger rack, for a shoulder stock.
Metal tubes?
You can call them whatever you want, metal, carbon fiber, it's till just two tubes with magnets.
where do you watch the replay?
Can't call them whatever I want, that would be pretty odd, but, you're not wrong about the last part.
I just googled Ghost of Tabor AMA and it came up its dated 10-12-23 its the second vid that comes up with Scott in the middle of the screen with a baseball cap on, very good watch mate
Youtubed even
USA only though, sucks for us europeans
dang :( didnt even know that
About 45mins in
https://youtu.be/IJ7A2ni0kUU?si=_PRDFh3K1murGTw_
If you liked my editing style please leave a Like, Comment, and Subscribe!
Socials:
https://twitter.com/Danny5247/
https://www.twitch.tv/danny5247
Watch these videos as well:
Get into the Ghosts of Tabor EA: https://youtu.be/Wxk0kfq-d6s
Ghosts of Tabor Competitive: https://youtu.be/03Y-2nhEElo
...
yeah that's why i'm waiting around for the tabor stock, otherwise i'd have bought the freedom stock already lmao
Yeh but I wanted him to watch the whole video as it’s got some great little insights and some fantastic questions
True!
don't need to watch the whole thing to find the info you need though
Is anyone aware of different mfg that makes the middle breakaway type stocks like the one they're prodcuing for the game right now?
I’m just trying to upvote the AMA to get more people to watch them and get involved and hopefully boost the reach of the game
I don't think I can wait for the production to finish to order.
I found one called "The Freedom Stock" but that's sold out.
they're always sold out and it's usa only
Damn
yeah i just tell people to play it, most people are pretty into it when you say "tarkov but vr"
That’s exactly what I say lol.
does anyone own the magni stock here ?
Welp, I just spent an hour looking for a magnetic split stock and pretty much nothing is out there right now for the Quest 3 (there's Q2 model but it works with the controller rings so won't work on 3). Does anyone know when the Tabor stock is coming or is it just SoonTM?
In the AMA Scott said they were being assembled and packaged as we speak, but did not give a specific time frame
Hmmm thank you. I may wait then.
60 - 100 dollars depending what addons you want like a shoulder stock etc
I appreciate the info. At this point I am a couple weeks into Tabor and its my first VR shooter. I like it enough to were its less about price and more about getting the right stock for me. I tried the Glistech Magnistock and it just isn't gonna work.
have you seen the virtual stock thats build into the game in the settings option, its not fantastic, but does make playing without a stock a little nicer, until you get a stock you actually find that works for you
Yes, I've been using that after deciding it was better than having the Glistech but not good enough for long term. It does help steady the barrel hand for sure.
best gunstock in a cheap price range?
make one from plumbing pipe
cheap for a gunstock lol
The ones I see are like 150-200
the stock i got was 70 and it came with a sling and a bittstock pad its dope 3D orinted tho
oi, what are yalls thoughts on the Olen VR spine?
It's mid af for Tabor.
you got a recommendation for a stock?
other than protube or whatever they are
DIY or scroll up a bit
I just got the protube last month. I'll do a review but it's pretty good so far
huh, the spine seemed to get well rated. that is a huge wealth of knowledge to look through, ill spend some time reading. 11/10 for the coat hangar stock
What gun was I just using? Winner gets a kiss
P90
No but it is a SMG
Yep
Never used it before but I’ve been using it these past few raids and I love it
nice
my povertystock ahs been temporartrily retired while i'm doing the "kill 7 players wwith a makarov without dying" quest lol
i've never wished for a 2nd sidearm holster more in my life
We need akimbo lol
100% we need it asap, it's pretty easy to learn to aim both hands so dual pistols makes sense, specially for the more close range maps like silo and probably parts of matka
Tf, who is that for?? That sounds heinous
it's for the gunpowder store that isn't shiro, yellow one
gets you 35k xp though
surprisingly not too hard to pull off as long as you can aim a pistol, just had bad luck with silo
No dying?
Jiri's survive x# raids without dying is easier and more exp tbh. Just book it to extract.
it's a third the xp
10k not 35k
and i can run both quests at the same time along with specter and minty's handgun+polayer kill quests
Oh, no kidding? Makarov quest seemed like such a meme. I must've read the exp number wrong 😂
yeah the xp is well worth it, and it's really not hard to kill with a makky since you can take 10 mags in on a chestrig
what stock is that
Magni stock +
mmmm i see, the bending had me intrigued
Yeah there’s a adjustment point in the middle. It’s like a cheaper version of the Protube
Which has 2 adjustment points
Hey dudes, I'm looking for a gun stock, but I'm EU based (Norway). Any suggestions? Shipping from the states is an absolute bitch
magtube
(ships from France, for info)
Protube best one by far for eu
aight, ty
as emidex said, protube is in EU and can get it to you fastest. that's 145 EUR, I just bought the Magni Stock which is in the US (£63) but with £55 shipping it has 2 day shipping, both over 100 EUR, Protube more expensive and better, but meant for serious e sports players
best universal gunstock (works with any gun) for quest 2, US east (michigan)
what is your price range
I'm just gonna 3d print my own
man can somone help me setup my gunstock i cant figure it out and im about to not play because of it
check pin
i watched your 30 minute video and i still cant get it right, wdym by pin?
and im an index user
so my video is on how to size it for your body
the second video is about optimal front grip positioning
after you make those adjustments you have to align the grips horizontally
and then if you want to use the software calibration to optimize the rifle height and eye relief there is a pin
that is pinned in this channel
i still dont get what im doing wrong. i feel like i've already learned that entire process through my own trial and error.
you'll want to provide some details and specifics for anyone to comment on that
can i make a video for you?
best to use text
definitely not youd be able to have way more info in a 3 min vid but ok lol when i grab my m4 and aim down sites. the m4 will be aiming towards the sky. If i fix the ADS issue. I cant grab the gun. If im able to grab an m4. i cannot grab an m4 with a grip on it. If im able to grab it with a grip on it. i cant aim. I cant ever grab a galil and aim. The only thing thats fine is smgs.
most guns give me issues
my gun stock is shaped like this {_/
gives me the most access to more weapons while still being able to ads
what stock do yo uhave
Protube VR w magcups
so the pin has the answer to your first question, if a gun is aiming towards the sky its probably because you have a straight stock setup
not straight
the rear controller is too low
its on the smallest incline possible
otherwise it would be straight
and its length sits just beyond the m4s mag well
incline? needs to be declined
lower the front post to one notch down
if gun points too high that means the rear controller is too low
thats why you need to be one notch down from straight on the front post
you can use gunstock calibration to adjust the height if you want to try to change that
so the opposite of what i have it at
i dont think you will get a positive improvement
also, regarding ease of grabbing the front post when the gun is grabbed, you can use gunstock calibration to change the rotational pitch the gun class is held at with one hand, or you can alter the hand pitch rotation which changes it for everything
whenever i try and change the pitch in the calibration to be able to grab better. it breaks my ads when i grab the gun cant see down the sites. i havent tried touching the hand pitch roation since i set that to pistols when i first got the game. i can try playing with that setting a bit but i hadn't thought that it applied to all guns for some reason
the pitch does not affect the angle the gun is held when you are holding it with two hands
just one hand
Hi, I can recommend this to you. Coming from Germany, quite cheap but very good quality for the price.
https://www.vrifle-3d.de/
yeah i cant figure it out
did you lower your front hand?
yes
if you are still aiming high its not low enough
it does have pitch in gunstock calibration
one joystick does one set of changes, one does the other
use the right stick to make the gun point further down
you dont grab it during the gunstock calibration phase
obviously i mean to shoot it
read the pin
what pin

define pin
i dont speak pictograph
up at the top theres a pin
thank you
you press it and you see pinned posts
it has a step by step
that doesnt work for me
if you arent sure which step to do next, follow the steps
which step are you getting stuck at
the part where i can i can put my hands in the stock and grab a gun. and when i ads i can see down the site picture.
its one or the other
ok so i fix that, now i cant grab guns with grips on them. what now
its the same gun
The guns aren’t shaped that way
m4
im supposed to do that in raid?
say i find a grip in raid, im then supposed re calibrate my stuff so i can use the grip?
that doesnt seem right to me
That’s not what I said
sorry instead of recalibrate. take allen keys to my stock and adjust it
Or do t tighten it all the way so you can adjust it on the fly
That’s a key protube feature
all i want is to be able to grab an m4 with and without a grip and still be able to ads
without it being very off with one or the other
well games not for me then
lol
they should fix their calibration in general tho it sucks. should be more specific for guns
give me 340 krone
Anyone got any good gunstock suggestions?
you are willing to spend up to 1224 USD on a STOCK???
Yeah I need a good quality stock
you can practically have any stock on the market
Ok then any good particular companies?
tbh idk of any in that range at all
Protube carbon fiber gun stock is a good one
how do you calibrate physical gun stock in the new patch I cant seem get on to the settings I turn it on but nothing comes up on my screen cant anyone help me with this ?
45 smackies
Gothcu Ima send some info to ur dm take a look
k
i am new to the game, would it be better to learn the game without a gunstock or get a gunstock and learn the game, how much of a diffrence does it make?
Many will say that a gunstock makes all the difference i tend to agree
in my personal opinion i would play the game for a little see if you actually enjoy the game and see yourself playing it for a good while and then get a gunstock
so i just got my protube gunstock today, and after calibrating it with the weapons it gives you, my weapons still point upwards after calibration. is this a known issue or am i doing something wrong?
https://clips.twitch.tv/PricklyTubularBarracudaPicoMause-vxFUP585vkUbiZyi follow this, then read pinned messages for how to use calibration
that doesnt cover in game calibration, if your gun is pointing up that means your rear hand is too low / front hand too high
in game calibration is just a global offset for that weapon class, guns will still have different geometries and need to be held differently
fortunately you have a protube and can pop the center tube up and down easily to adjust for the different gun shapes
thats what i ended up doing. i just turned the physical stock off and am adjusting the front tube as needed. appreciate the answers!
i still use teh gunstock calibration to improve the eye relief and optimize the height
its pretty small adjustments other than the eye relief, guns are like 4-6" more forward than the controllers on index
yeah i was doing that as well. i read through some of the older messages you had and that helped. only minor issue is the sight isnt perfectly lined up and one of the weapons was slightly canted to the left. but im still able to see red dots and line up shots. wasnt aware the stock couldnt be straight :/
horizontal offset means you need to adjust your tube alignment, loosen up one of the cup mounts and rotate it ever so slightly
gotcha, thank you
i cant set up my gunstock, when i calabrate it (like ur meant to, i looked at a vid) i can hold the gun with my other hand. if i move my hand off my gunstock and hold the gun the it points upwards and i cant aim PLS HELP
Read the pin like you were directed
when is the wipe? and why 3 minutes between messages in general? lmao
Because it’s been in meltdown all day
This channel is for gunstock chat, go be patient in #💬・general-chat or #❓・questions
ppfffffft! I use the magtube, woulda taken up less space to just answer the question, lmao
hello guys! the config of the stocks is not dispaying correctly (at least for me) the example guns and the real models are not the same.... im using a sidewinder stock (two hands fixed stock) and I had my config done, now i can not even play xD
i cant set up my gunstock, when i calabrate it (like ur meant to, i looked at a vid) i can hold the gun with my other hand. if i move my hand off my gunstock and hold the gun the it points upwards and i cant aim PLS HELP
check the pin, the displayed model in the gunstock configuration is not meant to be taken as a literal outcome
the pinned instructions take you through step by step, as well as understanding the limitations and design goals of the current gunstock calibration process
I was wondering what exactly is a good gunstock for meta quest and maybe even meta quest 3 if there is one out yet. And also what are th benefits
I did, but the problem is not the limitations of the system of gunstock, is that the model for configuration in the gunstock menu doesnt match with the weapon after config, looks like the model of the gunstock menu was way lower than before the patch! thanks anyway! ill try it after!
this is correct, the gun will not look like the gunstock calibration, and you should avoid thinking of it that way
the gunstock calibration model is a represenation of the offsets that you will be adjusting when you hold it with one hand
the front hand position is not affected
so, read the instructions and take it step by step, with a straight gunstock (not a recommended design) you'll need to raise the gun height so that it effectively sits higher in your hand so your front hand is lower
got it!! thanks for the help :))
I have a quest 3 and a gun stock, when I place my left controller on the gundtock it’s aiming completely left instead of in front of me , and when using my right hand to hold the gun the gun goes completely sideways and aims no where near I front of me, and I can’t find how to changer my hand orientation horizontally
Gunstock alignment doesn’t alter horizontal settings, that means your stock needs to be adjusted so your controllers are slightly more to the outside
A video would be more helpful
Does anyone know how to change the cups from the magtube protube?
How do I change the controller cups of the magtube. it just arrived in G2 controller cup form but I want to change it into the index ones
i mean, you just put the index ones on the stock instead of the g2 ones
you dont really need to do anything
the magnet mounting point is the same for all cups
hey @royal wagon , appreciate all the help. wondering how you deal with accidentally touching/triggering the ingame watch when you have both hands on the gunstock. I have a magtube and it keeps happening when the IK arms twist in a certain way if you shift your body or look to the side. it's infuriating lol
You ignore it
i'm jealous that you manage to ignore it. the constant BEEP... BEEP drives me fucking crazy.
sometimes I manage to avoid it by placing the grip slightly differently on the ingame model. Or using the sideways grip can help. But I don't like it
does anyone know the best preset for a m4/scar type of gun for the magtube? @royal wagon which one do you use?
no such thing as a preset
like in what form do u keep ur magtube?
i have the front bar one notch down
but what i tell people to do is learn how to customize their magtube to most optimally fit their body
and what kind of front cup position is the optimal fit for dealing with the different gun shapes
afterwards i recommend using the gunstock calibrator to tune the height of your desired guns, and bring the distance closer to your body to be more realistic and give you better eye relief
thank you man. I just saw ur video too and it helped me alot tuning it to my body
is a gunstock worth it or should I just use virtual one?
opinions vary, determine for yourself
Anyone know about how to calibrate very good because when I calibrate its kinda wonky
read the pinned guide, its step by step
click the pin icon
is Istock vr a good gunstock for Got?
It's not really useful imo. There are better options for this title.
yeah but what I dont like about the fill stock ones is that you cant really switch hands with which you hold your weapon mid fight
Why would you do that though
Some stocks can be adjusted on the fly.
But yeah... why would you want to shoot with your non-dominant arm?
idk, isnt that pretty useful when for example peaking a corner on the left? I may be completely wrong tho
Currently there's no leaning mechanic.
Shouldering the weapon on your non-dominant shoulder right now slightly helps expose less of your body, but your player model will probably stick out anyways.
May as well be comfortable and take those fights head on as it is now.
- I'll have to test that theory later... Interesting take on it
fair enough, what gun stock would you recommend?
If you currently don't use one, build one DIY first: #1123529753274634251 message
See if it's something you even would like to consider. THere's lots of great options at various price points. Scroll up a bit in that same thread for my other tests/uses with stocks.
alr, tysm <3
Is the controller “base”/ grip of the Q3 the same as the Q2?
Wanna know because I have the magnistock+ and when I get the quest 3 I wanna know if it’ll fit
Almost, there’s a new LED to help with tracking
I think the shape is slightly altered
I’m hoping I’ll fit if I get it if not I’m sure they’ll make a new cup for a few bucks
If not I can try to print one
did they fix gunstock calibration yet
Been playing GOT and was thinking about a gunstock would y'all recommend one and if so which one?
For the most part yes they are identical. If not they are ever so slightly different
No
I sell one for 34.96 and works with Q2, Pro, and Q3 I’ll send some info to ur dm take a look
Is the stock calibration still (broken)
Yeah, it's the same as you remember it.
its kinda usable with my gunstock lol
just that it cannot change the non dominant hand‘s position
so my left hand is lower than right hand and i cant load mp7/mp9 without switching hands
I bought a protube magtube. Wont need anything else. They have an insane reputation but it depends what u are looking for and how much money u want to spend.
^^^^^
gunstock calibration works fine for me, ive got several hundred hours on it, but i have a stock that is adjustable so i can work with it properly
Magni Stock, paid for 2 day shipping, been 2 days and it hasn't even left lol
When's the official ghost of tabor ghnstock comin out
a bazillion years
I created a suggestion to make it possible to save, restore, and trade gun calibration settings. Leave your thoughts at https://discord.com/channels/949081704625209404/1166749669339168819
Can anyone help me, when watching videos of people playing their game, they have an option to calibrate their gunstock, I don't have that option in my settings?
You may have to go back to the bunker or trying go to market back to bunker and see if the button appears.
bruh
i feel the same way
its been like 7 months bro
Is bunker also known as safe house? I'm new.
So basically if I swap locations, it's 50/50 the setting will show up?
No, just go to safe house and the option will be there
Follow the instructions in the pin on how to use it
and they didnt fix the hand offset resetting
do they not give a shit about gunstocks or something
Yeah the button used to say safe house. Last night I noticed I didn't have the calibrate button while in the mission. I don't remember if I restarted or just changed locations and then it showed up.
It would@not be wise to mess with in mission
Used to? Mine still says safe house 😭
I don't know man. I'm on dayquil right now. It says what it says.
That's where I've been at and it doesn't show up
There's a pin in the top right. Click that, read, try it, then ask any questions you have.
Screenshot your settings menu when you are in the safehouse
where do i get it
get what?
the gun stock for this game
the official is not released yet but there are plenty of solid gunstocks around
your choice 🙂
there's an official coming out?! that's kinda neat
68 something but if you want a shoulder rest its like another 20 or so
check pins
Anyone have a solution with controllers tracking stopping from when connecting to a gunstock . Ive expereinced this with the Index controllers and now on the Quest 3. At first it was a Index controller problem but looks like it might be a problem over all.
Using protube atm and also had the problem with the Olen Spine
i dont have that problem
Yesterday it wasnt bad , today its doing it consistently
the q3 problem is different
cant ever reconnect a controller to it without both just stopping to track
its disconnecting the battery like it used to on CV1
even If I tap them together enough it will do it
the index one can be caused by IMU overload, which you can recalibrate
you can brace the battery with something and improve it
i dont know what the optimal solution is for the bracing, ive heard a few people figured it out easily
i talked with oculus hardware engineers about this in 2018
sadly still a problem due to bad design
on the Quest 3 controllers it seems to be solid , I cant tell from that picture if it has the same bit where the positive end of the battery connector detents in to create a tighter hold
i talked with someone who said bracing the battery fixed his problem
on the Q3 specfically ? Ill give it a test then
yes
oke
Got the Sinlaki Q3 gun stock, feels great in Pavlov, onward and contractors. Definitely still have physical gunstock off in Tabor and it’s ok
I want to get a gun stock but I've never got one before does anyone have any suggestions on what one I should get
i actually sell one for 34.96 that is specifically designed not to break the bank but still offer great features and usability. ill send you some info to your dm
Ok
Does it support Steam vr controllers
nah currently only quest 2 and 3 and pro
Honwsrly same I've been thinking abt getting one
This one would work so well with an mp40
whatever yall do DO NOT GET glistco. the cups break over time so fast
oh yeah I love that the left hand can move up and down for different guns
honestly the immersion is the thing that gets the most impact on getting a gun stock, secondary is your aim definitely feels way more stable
so what is the final answer, physical gunstock enabled or disabled?
man
it doesnt align correctly
thats the thing, the calibration always has the iron sights set off to the right
rather than straight with my gunstock
so i guess ill try with it off, until some fix or something, ive tried almost everything to gett my guns to actually align
just do Off, If you do use it make sure after calibration restart the whole game, less likely the hand angle grip resets to a weird angle randomly and messes everything up
Should I get a aliexpress gunstock?
only if you know it wont break too soon
Nice house
It’s supposed to be here for a good time, not a long time.
Ok one of the guys who thought bracing the battery solved his problem, I think it didn’t. There’s a “bump to enable hand tracking” thing that might have been causing a problem, see if you can disable that
where do you buy the official gunstock?
It’s not available yet
rising?
do you mean when the recoil is pushing the gun up more than how you are holding it? yeah, use more controlled bursts
if the gun is rising that much you are firing way too many rounds too frequently
precise fire > volume of fire
Or just drag down with your off hand to combat recoil
precision > volume
Close my eyes and hope for the best type of vibe
I disable it since I have an adjustable stock
anyone have recommendations for a stock. I want something I can throw grenades. And use pistols with.
Magnetic
If want fast swapping off of stock you're going to want magnetic
Don't forget the bowk stock
Just let go of the controller cups and the stock drops
I have a problem with the magtube where it is pretty difficult to reload as a newcomer like me. Did I setup the gunstock wrong or do I just have to get used to it?
Does gun stock calibration work yet with this update? Been waiting to play until it’s fixed
Yeah was going to do more testing just battery ran out and was late and time to bed.
Felt like it worked , maybe it was coicendec . I just put layers of electrical tape to keep it more snug and keep movement to a minimum.
Ill give that a go later
muscle memory
also knowing to keep it slinged to your side correctly so you can grab and put it up quickly
No update since release
Bummer
Indeed
Oh yeah I had the Kobra stock for my quest 2 and now have Sinlaki. I loved my Kobra, because it all lived on the right hand and no magnets. But im in the US so shipping took a month. Sinlaki has a place in CA so super fast shipping
What gunstock should i get for a decent price for my quest 2?
I have a glistco gunstock for my quest 2 its doing good so far
Hey i sell full gunstocks for 34.96 ill send you some info to ur dm
Sure
Just sent check ur message reuquests
is a protube worth or nah?
yes, easily
be careful with the glistco, the cups stretch and break easily and then have no hold. BUT they do sell replacements on amazon too.
send me the info too pls! 😄
which Kobra?
can do! check your dm
Can you hit me with one as well?
I got the Kobra Sidewinder, the only thing Id say is I'd have the buttstock part on my shoulder for some guns in tabor. but other games rocked.
I would have gotten another Kobra stock but theres none for Quest 3 yet, and I don't wanna wait a month again lol
Yo what gun stock is the best for quest two (want a good one that can get all the stuff done like sidearms knifes big guns little guns everything)
magtube
Will do!
Anyone wanna rat silo?
#🤝・pvp-groupfinder is the only appropriate channel for that @mild nebula
Thanks
Any quest 3 users got a stock yet?
Quest 3 MagTube has been shipping to customers since the 16th
Does anyone else have a problem aiming down sights with the taran tactical rifle when using a gun stock?
Yep the QuestStock v3.1.3 is fully compatible with q2 q3 and pro for 34.96
I 3D printed my own gun stock which works perfectly fine but I’m having trouble with the reloading, the gun stock gets in the way when I’m reloading any weapon. Is there a certain way I have to reload or is it just my gun stock?
its your gunstock most likely.
Its a streight rod right?
if so the only thing you can do is lower your hand controler tilt ofset. what this will do is when holding the gun with one hand will make it point lower this will most likely give you some room to insert the mag on some guns
the mp5 and otherrs will still have trouble most likely
I’ve not heard of issues with prostaps but I have an index so that’s not an issue
They have excellent customer support, reach out and tell them the issue
Is that the benefit of ones like spine? Because the rod is mounted over too you don't run into reload and gun interaction issues?
no, tubes over the top are generally not recommended as they are known to cause tracking issues
Has anyone here used a glistco or protube while seated? Are these stocks too big to be used seated
so long as your seat doesnt have arm rests you should be fine
playing shooting games without a stock will be challenging with a chair that has armrests
reach out to them on their discord, they should be able to help you get things sorted
that sounds unfortunate, but your problem also sounds unusual. im pretty sure this can be easily resolved and then you'll be able to fully utilize the best gunstock on the market
again, their customer support is extremely good, its one thing they have built their reputation on, but you do need to put in a tiny bit of effort to reach out
their discord is a great place for that
https://www.protubevr.com/en/content/42-tutorials did you install the ProStraps following the guide? If they slide right out it sounds like either you didn't install the adhesive part inside the battery cover correctly, or the adhesive failed which is covered by warranty and would be replaced for free.
I have found a bug with GoT gunstock calibration. When you calibrate (double trigger) a weapon type, it stores data for both hands. When you click clear all calibrations, it only clears the dominant hand data. If you keep physical stock enabled after doing the clear all calibrations, when you two hand a weapon type you previously calibrated, the secondary hand is going to move but not the primary. This can be very annoying. If you have physical gunstock disabled, this bug won't affect you. I suggest calibrating all weapon types when enabling physical gunstock if you might have calibrated them any time in the past. Another workaround is to delete the PlayerSettings.sav file for PCVR (just lose settings).
data for both hands you mean it adjusts the offsets for both hands when you hold the weapon in either hand?
not the front grip right?
Vector offset and quat rotation for primary and vector offset for secondary. Doesn't apply until both hands grab it I think. I'm still early in trying to understand how it works. I've read what you've posted and that's helped. I just wasted a lot of time due to this bug so I wanted to put it out there. Maybe I will write something up or make a video down the road. I'm excited with the new gunstock and am trying to get everything just right.
interesting, my experiments showed it didnt apply to the front hand
I made a video but I don't have time to edit it. Maybe this is hard to see. But this is after the secondary (what you call front yes?) has the offset applied. My front controller is way down on that white line. The game has moved the front up to where you see it (that's a real gun not a calibration gun).
That's before gripping.
jon from protube posted in here earlier reaching out to offer help, take him up on that, they will get you taken care of
intersting, so how did you achieve this affect? just changing the rotation?
I believe I did an extreme rotation, looked at it, cleared calibration, and then happen to grab the rifle and it jumped up. So I started to try and understand what was going on.
after you cleared calibration did you restart?
Do you have an adjustable stock like the protube or the magnistock?
Probably not. I was exploring that bug. If you want to know if it happens normally, I can look tonight. You can see the values it saves in the text file on your PC. There is a section for secondary grip offsets.
in playersettings.sav? what are you opening that file with its not text based entirely
I robbed some people and got the magtube
Then you shouldn’t need calibration just adjust the stock
Notepad++ the top is gibberish but the bottom has English labels and binary values
Disable physical stock and just adjust till your hands are in the right position with the gun
gunstock calibration is still good to fix the terrible z axis positioning of the guns. the guns socket to your hands like 6" in front of the controllers
what encoding?
I was hoping to raise the gun and move it closer
Vector in ue4 is three 32 bit floats
Ah ok yeah if you just do that and don’t mess with the pitch it shouldn’t mess up
I should've taken a picture before experimenting lol
Just disable gunstock calibration And reset calibrations then go from there
Just restart your game after
i think you dont understand the advanced stuff kirk is doing landon
hes not asking for help
I mean the shape of the magtube. I was seeing what weirdness I could get into
Ahhhh
@hasty marten next time you test, make sure you quit tabor and reopen, thats the only reliable way to save and load the settings, i wonder if it does anything to the offset changes you are seeing being made to the secondary hand
can you show me where you are seeing settings saved for the secondary hand?
The file has no calibration data until you hit double trigger. I think that's the only write to disc. I don't know when it reads. I'll restart to be sure.
gunstocksecondarygripoffsets?
Yes
hm
I don't claim mastery or even understanding of the calibration process. I just understand the comp sci stuff a little better than most
I'm wanting a stock for my quest 3, not sure what to get, any suggestions?
magtube
I was looking at the Kobra cqb v2, I think that not having magnets to worry about would be handy.
most people would say that not having magnets makes it less flexible and slower to use
what are yalls thoughts on this: https://www.ebay.com/itm/134197070183
non adjustable controller angle, non adjustable controller height, improperly positioned shoulder rest, no cheek rest to speak of, no magnets
Looks like a flimsy 3d print.
And yeah, the hands being so high up compared to shoulder would make it feel like you're using an RPG
cool, ima buy it
Not sure how you got that out of the responses
not sure how you got no magnets and saying a non adjustable controller angle is a con when the official one being released by the game devs is positioned nearly the same 😂
You might want to wait for it to be released and see what other people think about those features
We have plenty of people complaining about the problems such a design has here with existing stocks
Non adjustable means you are at the mercy of the limitations of the app you are using
Protube is very good. A little more money but worth it IMO. I tried magtube with the rift s and the HP Reverb G2 and went back to protube after I bought the quest 2.
At least until they fix gunstock calibration
Using my stock I can never get my forehand to be in the underhand position on the handguard for the game to recognize being able to grip. Tried for over an hour. Anyone know?
No matter what I did my forehand seemed a few inches off to the left and in the handshake position rather than the underhand position.
Also after trying to calibrate some weapons it seems my rear arm gets stuck in the position as if I'm still holding the gun, so I can't reach with it. What's that issue?
you dont grab guns in the calibration
phase 1: observation
put the controllers in your stock, grab your gun you want to make changes for, ADS with it, observe the position you would like the gun to get adjusted to improve
phase 2: go into gun calibration, select that class, put your controllers in the stock, move the gun in that direction, save it, check the original gun again
want it better? go back to phase 1
since you cant actually grab the gun during calibration, which is when the position of your front hand would influence the orientation of the controller, you have to mess with it a bit
if your gun is excessively horizontally off with 1 hand to the point your front hand cant grab it, thats a problem with your gunstocks horizontal alignment
either the angle the controllers are pitched, or how far "in" your controllers are positioned
Okay I will try that tomorrow, thank you.
So you're saying during calibration my stock is not pointing straight, but off to the side and that's causing my hand to not be close enough to grip when I test it outside of calibration?
yeah i wish they would make it where u can grab so u can adjust your stock accordingly
guys can someone show me a gun stock that is only on one arm and is only really a stock?
istock
Was the Vstock for SKS and other buggy guns fixed? Iv not had any issues with them so far after patch
Though the new shotgun seems a little weird with it
Which one and what printer?
nice! i have a 3d printed gunstock of my own that i modded to work on quest 3. What does yours look like?
Should ship me one fr🙀
how gunstock work actually, after buy gunstock i need just one time calibrate it and that's all ? for every weapon i will equip it will work as i calibrate ?
yea. each weapon class has its own stock calibration. some stocks are good. i have 2 for my quest 2 and waiting for more to release for the 3
Read the pinned item by ragesaq. It details how to set it up.
I look most popular company on google gunstocks is protubevr
i wanna wait for my favorite brand kobra to make one
they had fantastic quest 2 stocks. the sidewinder was my lowkey fav for tabor
folding stock. low profile aluminum bar spine, adjustable hand distance, fast grip cup. i loved it
Protube does make the best stocks
i dont like the magnetic cups and i kinds dont like the spine being below my grips, i shoot guns irl and it just dont feel natural to me. the only thing good about protube is adjustability
You can’t feel the tube position, and if it’s under the controllers you can snap it to the cups by just bringing your controller to your waist
nah. its not natural. i like the spine being inline with the actual gun tops. its more realistic and natural feeling, im a 27 yo vet and used both stocks, the tube being below just fucks with me and it feels less accurate to me compared to the fixed spines
But you can’t feel where the tube is if it’s rigidly attached, and you can’t see it
and imo without magnetic cups hard to grab some items on ground
kinda, but i always know its there, and i hate the magnets, the fast grab grip is easier to disengage, and can fold stock to use pistols and luttys
i like the more natural feeling of a fixed spine overall, cant be more realistic with out sacrificing functionality. i drop like 11 kill island raids with numerous ghost kills, and i rarely die anymore. i wasted 2 keycards yesterday and im sad. i shoulda waited
You, yeah you, I like your username
I wish I could use my gunstock on this game but I guess I have to wait until they actually fix gunstock calibration
You can it’s just annoying sometimes
i had quest 2 cupholders printed for my quest 3, but they are just not quite right
is anyone sharing quest 3 cupholders?
WHAT THE FU-
Define 'look stupid'
Some stocks are a pipe and two magnets
do you want something that works good or something that works stupid
Is it all about looks? Cuz you're wearing a headset.
you wear VR on head doesnt matter how it looks irl, it need to work in game and fit good in your hands
So how comfortable is it to switch between holding a gun and opening your backpack for a syringe?
I know some gunstocks have magnets that let you detach the gunstock to have free control of your hands but that seems like a hassle when you'd need to attach them back on the gunstock without seeing it
I'm considering getting one for better accuracy and immersion but that part I mentioned bothers me as I just can't imagine it being comfortable to use for anything outside of shooting
same, this is why i still thinking about protube, aiming will be better for sure but donno what about taking items etc and back to gun(gunstock)
https://fxtwitter.com/jBahrVR/status/1717253848153084090 jBahr seems to have figured out a perfect solution
I think I am onto something. What do we think Taborians?
No shoulder strap to deal with ✅
Always know where the stock is ✅
Quick access to snacks while playing ✅
@ghostsoftabor @ProTubeVR
Screw this i will buy it earlier or later 
its all about muscle memory with a gunstock. after some hours (or sometimes days for some people) using a stock and interacting with the world around you become second nature... like driving. you just have to bare with the learning curve of using a stock. dropping the ProTube (once you're used to using it) to interact with backpack or anything else becomes a thing you dont even realise you have got the hang of (second nature)
personally i use a twist motion to detach my MagCups. others use different methods like pulling. this also is something you would pick up quickly to what ever works for you best
I actualöy havent played with a stock since i got the q3 my handgun game is so much more fun need to relearn aiming guns though, would lile one of those super small simple thingies for the q3 but i cant find any prints or anything
I'm gonna 3d print one that uses magnets 😎
Does anyone know of a cheap gunstock
V stock
Ok? Where can I find this v stock
in game, V=Virtual
Oh. Then no
Fire gun stock?
^ use closet hangers
Gunstock gateway drug tutorial here:
How I recommend you run the offhand(forward hand): https://www.twitch.tv/sweatygeckottv/clip/CulturedRealKangarooAsianGlow-rspWyA7nRZYPsK_2
-Just with my stock, not the https://www.etsy.com/listing/1433726625/speedrun-pro-vr-gunstock-meta-oculus?ref=yr_purchases that Gecko runs
DonZzzilla's iteration upon the original Poor Man's Gripstock. ...
It works surprisingly well
I'm thinking about designing and 3d printing some parts that fit the coat hanger parts together better instead of just duck tape
Step it up a level but still staying away from the expensive stuff
Be cool to see what you come up with!
If you make things that can fit the inside of your circle
You can make it use magnets
Thats what I'm gonna do
this is the gunstock i made and improved it a lil bit
I'd love to see it. What'd you improve on it?
i posted it already in this channel
here is the post
I remember this post! Great job!
still holding up to this day but i ordered the ultibrace gunstock off etsy today
Tellin ya, it's made for this
Big shoutout to all of my Discord members! I love playing with you guys. Also big shoutout to Brandon for sending me the Ultibrace Gunstock. Really enjoy this product and I plan on using it for all things VR!
=Ultibrace VR Gunstock=
https://www.etsy.com/shop/BrandoDrumVR
=Join My Community Discord=
https://discord.gg/m4kKyDNdrk
=Chapters=
00:...
@remote tiger some one sent me to you to get a gun stock do you have a Web page or something 🤔
Ok thank u
KobraVR is awesome. Good stuff. I recommend to everyone.
That being said, my gunstock, specifically with the front end grip is similar but has all the adjustability you want.
Although for GOT I recommend the forearm brace instead
Big shoutout to all of my Discord members! I love playing with you guys. Also big shoutout to Brandon for sending me the Ultibrace Gunstock. Really enjoy this product and I plan on using it for all things VR!
=Ultibrace VR Gunstock=
https://www.etsy.com/shop/BrandoDrumVR
=Join My Community Discord=
https://discord.gg/m4kKyDNdrk
=Chapters=
00:...
So uhhh... anyone got any good 3d printed gunstocks for the quest 2? I printed one off thingiverse and have been using it for a few months now and I think its time to upgrade. https://www.thingiverse.com/thing:4709000 is the stock i printed.
Hi, this is a remix of 2 different Thingis optimized for me and my Quest 2. You can also change the position of the shoulder rest, for the 2nd controller just mirror the "holder" and print it again, if you choose the widest possible position for the 2nd one and put the shoulder rest on the same position as on my picture, it should have the same ...
is the gunstock calibration better now?
I tried it once when It first came out and it was terrible
did they update it?
Nope. No changes yet.
))):
It’s workable, check the pins for a guide
@topaz carbon hey Man I got u right here. Check ur dm I’ll send you some info
I sell full gunstocks that are compatible with quest 2 quest 3 and pro setups for 34.96
why, thank you! i like your profile pic
Thanks! It's me wife
bat man?
This says Index compatible. Do you have any pics of an index controller in it?
Yes, at least the controller grip part
how do i specify Index controllers during check out? or does the kit just come with all of them?
i'm trying out a variety of stocks. i already have a couple magnet ones that i've 3d printed and i'm not sure i'm a fan of magnets in GOT because it's so active. the ones i have now work great for Pavlov tho
Etsy leaves a little to be desired in the options so just send me a message with the order. I think you'll like this for the very reasons you state
i also have a Q2/Q3, any chance i can get all 3? 😄
also a bit confused on the "Front End Grip" option - do you grip the end with the controller and it compresses the grab button like the other "front grip" stocks out there?
I sell one for Q2 Q3 and Qpro that is compatable with all 3 ill send you some info to your dm
oh wait we have already talked lol
Yup! I’m going wide with purchases lol. See which one is best. (for me)
smart


