#╟🎑reshades
1 messages · Page 28 of 1
i dont use this off
late falls effect are much more prominet
atmos partivclas u get small gust of fog evevy now and again
The fog effects/fireflies/dynamic fog i believe are tied to particles.xr
As long as nothing is overwriting it you should get them
Just make sure another particles.xr isn't overwriting ASR's one
Hope it helps
Hmm not sure then since I dont have gamma installed to test
i get the fog but there is flashing clouds (where the fog should be) at night every now again
idk i seem to get way better preformence with late fall rather than atmos and these on :
I get better perf too but like I said, its cos atmos shaders settings overwrites base sss settings with more emphasis on quality
ASR has none so your game is using base SSS settings for shaders so naturally performance increase
i seem to get better quality on late fall lol
You could do the same by removing the files in the shaders folder in atmos but obv it wont look as good
Try to do what my tutorial says https://discord.com/channels/912320241713958912/1118326896296480799
More likely you will get the result you are looking for, you will need to disable G.A.M.M.A. Weathers too, because Late Fall already includes weather settings
If you want the Frozen water then make sure to chose that in the SSS installer, only 1 of the 2 options tho, or you will get a Shader Compilation Error CTD.
Just follow this guide
will do thanks man
any tips to make the game run smoothly, i still stutter even if i tuned down the sun, grass and smoke. i turned on the "turn this on if you stutter". my stats(?in the home button) is like this ^---^---^--^---^ in some areas but on the plain and unpopulated its like this ^-^-^-^-^-^-^-^-^
Do you have some spare RAM ?
If yes, check the prefetch mod in the modlist
Also keep in mind that the first moments after a new game is often very stuttery, it calm down later
Ignore that, it just means the mod isnt on nexus mods
so how can i do this stuff then in the guide
Click on filetree
can i get a link?
how am i supposed to install fabio's golden autumn redux?:( i have it in mo2 but when i enable it i get this error, i can't find any instructions that tell me if i have to disable any other mods, change priority or anything :s
Golden Autumn conflicts with other weather addons, and soundscape overhaul (thunder)
Try run this Autumn last in addons list
tried without deactivating any addon, just base gamma profile with golden autumn redux last in addons list and it's still crashing with the same error
I can help you but not now, I’m far away from my laptop 😃
All is in thunder settings. Just missing “default” section
ok ty, i can wait:)
what folder do i put this in dude?
it's just a preset, so, i'm pretty sure the .ini goes in your anomaly folder, inside bin
sweet
then, you know how to select the preset, right?
I installed Golden Autumn, and unticked atmospherics -
It was working for a few minutes but now I keep getting shader compilation failed
Am I missing something? "
What do I have to disable for Golden Autmn?
nvm, i figured ito ut
I turned off all the autumn/grass options so I can have taller grass and it's still the same size how do I change this?
Is there graphics settings we are not supposed to touch when we install texture packs??
so ive used ASR which im assuming has a similar install process. you need to load gar at the bottom and leave atmos ticked
yea
ill try it
then
I get a diff error
that I have gotten before
any time I have atmos and GAR on at same time
wait are you using fabio's golden autumn redux or just some golden autumn textures
did you reenable atmos?
think I was missing that other stuff
hope its the same list
fabio should really make a custom list of what to disable for this package specifically
um
what the fuck XD
did you use his ltx file
might be better off just reversing the steps and dropping your ltx back in there
I keep getting it working
and then I touch my graphics settings
and it crashes to shader comp failure
anyone know how to install late fall?
i see it in a lot of the screenshots but im a newb to modding this game so i have no idea what to do
does those shadow looks like a shader corruption or something like that? it looks normal on daylight
i think it could be related to shadow cascade from sss
hello how to install reshade preset ?
Hey fellas
Does anyone have a screenshot of the default GAMMA reshades?
I don't need to individual settings or anything like that, just a pic or list of which ones to check
(oh and if anyone does see this and can help, please feel free to DM to screenshots to me so i can't/don't miss and/or lose them)
Anyone knows the default lighting settings? I messed mine yesterday
Thank you, you're a hero, sir
no problem
How could i make gamma look like this colour wise
dutch reshade
Cant tell if your joking or not
the netherlands reshade is unfortunately not a real thing, you could try setting your weather to never be sunny tho
Brotha
Why
dm me the preset
interesting request
maybe go for walk?

Someone know if volumetric sun rays mode give more performance than screen space?
i think volumetric takes up more performance
but i might be talking bullshit
im 70% sure because volumetric sounds way more expensive then screen space
Any good ideas for DX8?
I don't mind the static lighting, but I'd rather have some effects like lens flares or adaptive vignette sorta stuff
rookie
Anyone in-game who can take a picture of the reshade settings section for me? There are a couple of lines there I had to delete for using atmosR+ preset instead of the AtmosGamma preset. It looks like this. I'd really appreciate it!!!
There should be different search paths there that I removed according to what the atmosphere guide told me when using atmosr+ on gamma
hello people,can anyone tell me where reshade presets go?
nvm,i found it 🙂
If you have a circle and square minimap, you are most likely using a widescreen resolution, please use the following fix to get a nice looking minimap: #1093800373132722217 message
Does anyone know how to fix / re-find the preset folder for shaders with Reshade?
Managed this and lost the rest of the options, whilst attempting to import an effect to try out
Guess I'll just salvage my save and re install
@cloud boughIf you just run the launcher and deselect force zip extraction then install it'll restore all the reshade presets to default. You can copy your user.ltx file somewhere and then copy it back after if you don't want your game settings to change
How can I open that menu where I can configure the shaders? 😮
Press the home key
Thanks you!
No problem
This is insane!
It's looks awesome
Just crank down the saturation
you know the reshade menu that pops up when you press the M2 Home key above the arrow keys on what mod is responsible for that
Reshade
How do I set up aggressor instead of the other stuff
having a weird effect on some trees etc where the shadows come up silvery light / blue-greenish since I turned on "Shaders cumulative pack for GAMMA"
turning it off causes all sorts of stability issues
what's that mod supposed to do and is it needed?
Why does sky look so bright? I can only see clouds at dusk
also clouds look bad too
I'm using AtmosR+
How do I update ReShade for G.A.M.M.A? I have the 5.8.0 setup but I'm uncertain of what S.T.A.L.K.E.R.exe it needs when it asks to select program/application.
- you shouldn't've updated
- the anomaly exe
I didn't update yet. Still on 5.7.0.
then leave it be unless you're super particular about the header in the main menu
Alright. I'll leave it alone.
Thank you.

Sorry for the questions, I'm still new to setting up Shaders <xD I'm playing Gamma by default, but I want my game to look like the screenshots, I only have to download those 3 files, right? When I download it, where do I leave it? Do I have to configure and disable something too? If someone has a little tutorial it would be very helpful
Does anyone know which settings bomb the fps the most? Theres nothing about it in the framerate optimisation
Grass density/render distance and World Render distance can bomb fps quite a lot
Well, i didnt know that! Good thing that someone sent me a whole grass removal mod lol
@thick gorge how can i remove the snowfall particals and stuff, so it doesnt snow in foggy weather for late fall snowless textures
ping me less brother, access to other questions is also closed.
? what u mean
🤣
Any questions about removing content or replacing it partially or completely. not approved
how would you get the old emission sky back pre 0.9 the one with the green and orange in it kinda of
Can you try cfg_load grading_warm or cfg_load grading_cold in the console ?
Guys, is there any preset to make nights brighter?
You can't change it in the options ?
Like the settings ? There is one section for night brightness
No, its like making it more blue-ish like here
But i found Autumn_new preset here and it kinda makes it
Looks great with spring and summer grass too
i think this is already in gamma
are there any shades that make the game look vibrant more bright and colorful
i was able to get gamma pretty vibrant using atmos benis edit and the default atmosgamma reshade
@thick gorge quick question, trying to get summer season redux working with gamma i disabled all the stuff like with autumn season redux and loaded it at the bottom of mo2 but its still crashing on startup...anything im missing?
#╟🎑reshades messageis the aydins foliage Aydins Grass Tweaks 4.0 ?
Discord is the easiest way to communicate over voice, video, and text. Chat, hang out, and stay close with your friends and communities.
Yeah Im using that rn And trying to get that aydins grass mods
#1118326896296480799 message try this
sorry for the ping
no worries i will give it a shot
Yes
Oky thx
haii, anyone got any settings I should try out for reshade, I don't want it super vibrant, I want it alittle grim but not toooooo gim :3
Anyone with tips to make reshade look as good in low lighting (cloudy, dusk etc)?
I think atmospherics (only weathers) conflicts with summer. Make copy of atmos, then remove configs in atmos. And check it out
That did it, you tha man!
I think the problem is in the thunder, in the update I will make unversal thunder settings. and summer will work properly without removing anything from atmos
Hello, I was wondering
What are the best reshades to get the realistic/beautiful lighting to add on top of gamma?
Maybe some addons as well?
Not necessarily have to be the best optimized out there
#╟🎑reshades message This one is my fav
Really beautiful and realistic imo
It's so good I'm playing at 45fps just for the graphics
Oh, thank you
Is there a page on the wiki or a setup tutorial somewhere tho
No you dont need any tutorial
First download this https://cdn.discordapp.com/attachments/927860562677878795/1112012667213856889/Autumn_New.ini
then this fx files
https://cdn.discordapp.com/attachments/927860562677878795/1112012667968827432/FilmicPass.fx
https://cdn.discordapp.com/attachments/927860562677878795/1112012668358889523/reinline.fx
and drop them into Anomaly/bin/reshade-shaders/shaders
Thats it for reshade preset
But if you want more beauty you can download Aydins foliage and Autumn Season Redux Late Fall
Thanks!
Really appreciate the help
And one more thing is if you want more darker grass and tree colors you can reinstall the 289- Grass Tweaks (reinstall for different options) - Aydin to Autumn grass and Autumn Trees like this
Your Welcome ^^
about to try this, thanks for the concise tutorial ❤️
DAMN
You are Welcome ^^
Sheesh
almost no FPS hit either, very surprised
What is your cpu
5950x
getting like 50-60 outdoors yeah, but i also have draw distance maxed so
When Im gonna get a gun like this Im bored with double barrel 
just go to radar, murder everyone 5-10 times, you'll definitely end up with something nice
It kinda reminds me of the bf3 color palette
oh wow
It looks great. Like through sunglasses or sg...
TIL that I’ve never even touched ReShade for this game and was playing on the stock setting for years.
Atom benis ?
Could you please give me the links (i am very dumb)
yes, its the autumn version i think
but dont install it with late fall, late fall already have aydin grass
Hey been playing the game for a little bit now, has anyone asked about martymcfly rtgi reshade for gamma?
Dunno about martys but i use QUINT's and it works well enough
Quint, that sounds familiar, pretty sure i use that in skyrim. I know martys rtgi would be very demanding but would be beautiful
@rare sparrow for some reason the filmicpass and reinhardlinear don't seem to be showing up for me, despite me putting them in the proper place
should I delete shader cache
well I did that, but nothing changed
https://cdn.discordapp.com/emojis/992469515625562213.gif?size=64
replying ot this to download them later
With the shaders, is the default GAMMA one saved??
Or should I make a save for it before I mess with anything.
Hi everyone. Just tried to use a new reshade but it doesn't work as it should. Everything became dark and blurry, and the inventory colours look weird. Am I doing something wrong?
This is happening with "Agressor reshade" and "Duna reshade"
Does anyone have balanced values for the AtmosBody reshade? I hate how much my HUD is stretched out, would be nice, if someone could help me/give me balanced values for the Fisheye effect in reshade
Like, 50% bodycam feel, but also 50% not-too-stretched-out HUD
Would REALLY appreciate it ❤️
Tried these values, kinda satisifed but it could be better imo
If anyone knows more, PLEASE dm me or ping me here ❤️
Hello, I scrolled through this Chanel and saw some pretty amazing mods and reshades, do you guys think it would be possible for me to comfortably run some of these settings with a 2080?
tried these values, slight changes, but still not 100% satisifed... if anyone has a preset that they could send me either here or via DM (both are fine 🙂 ) I'd be forever grateful
can someone give me a screenshot of some cool shader settings
idk why my Emmison sky is not the one with green and orange in it I did this when I updated to 0.9 how can i change it back to the one on the right
which preset reshade do yall reccomend?
is there a ram setting cause i feel like gamma is capping its ram
I tried to install golden autum redux I did everything it said in the discord and got this error message
https://i.imgur.com/FgIvQbS.jpeg vibrance & technicolour
yo how to open the window in reshade that lets you customize your shader settings
Home button ?
yeah i am pressing
its just that the window where you can customize your shader settings is gone
Uncheck Performance mode
oh okay
Then reload just in case
ty

idk why my emmission sky change after i updated to 0.9 but it looks like the one on the left not the right one is there any way to change it
my reshade
Can you show a video clip...10-15 seconds running through an area?
I'm LOVING these "Dream-like" looks people are getting.
So what gives this Dream-like look? I just want to now that specific setting lol. Im messing with Sun Rays atm and it's kind of there but they're not as diffused like a dream-state look gives. They are too edged.
What reshade are you using?
can yall recommend me some light reshades that make base gamma look slightly better?
Can someone explain to a dummy like me how do I update reshade? It says there's a new update available in the upper corner...
Look up a video guide. It probably works the same as other games and it will explain far better than anyone in this server. It doesnt even have to be specific to anomaly/gamma since all the different games are the same
Ok I will, thanks.
i forgot how to record
customized gamma or something like that
adding little bit of bloom makes wonders you just gotta add the right one/s
i dont understand anything about reshading, plz elaborate
press home button then mess around
its not that deep you just press buttons and if the game looks better the button stays on
can you copy and paste reshade settings or something
I think I'll mess with the options tomorrow and see what I come up with.
i just dont wanna fuck my game up, so thats why im a bit caution with these
i dont really think these can crash your game
but they can make it look awful
yes but hear me out
if it makes your game awful
just unclick the button
its not permanent bro
👍
check out if that works its my reshade
download and get it to anomaly bin
(rename it if u want to keep OG gamma reshade)
gee thx
Does anyone know what does DRME motion estimatimation does in reshades menu? It literally cause a 15 fps drop.
How do I set my preset to atmosGAMMA properly? I set it to atmosgamma in the box at the top of the shader page but It seems the shaders that atmosGAMMA uses have been changed permanently. Now whenever I set it to atmosGAMMA it only uses chromatic aberration because I turned off everthing else. What shaders does atmosGAMMA use?
that;s what it looked like when I first started out. I changed some shit and now it's all too colorful and sharp
i guess ask someone for clean atmosgamma and install it
i dont think i deleted it, just disabled all the things accidentally
i could turn them back on if anyone knows which ones
why would you do that in the first place
i am retarded
this is what i have but i dunno if i messed around with it before
Thank you
i re-remembered how to record
HAHAHAAA
Couldn't have asked for a better preview. Thanks. MAN, I want to turn my grass up so badly but it's just too resource heavy. Looks good in your world though.
im out here running with 20-40 fps but its worth it
I love it.
So im messing with Blooming HDR and it is 100% the effect I've been looking to...give life...to stalker. Many options to learn but first was to get the game to just feel a bit new age.
Unfortunately I now have some weird blur now even when disabling the effects so i think something got mucked up when testing. Im going to restart.
I made a new Preset and it removed the blur. Not sure what happened as I only had 1 setting turned on...when i turned it off to see the difference I noticed a blur. So even adjusting just 1 setting and then turning it off, I've already found an issue. Lol.
Alright. Got it back to default default lol. Apparently an option was still "working" so maybe turning them on/off quick is a bad thing. Bakc to it.
Step 1.
Adjust overall Visuals
Effect = Blooming HDR
Before
After
No real bloom, just, better colors for now.
magic bloom is good
i also use ADOF
it removes the sharp pixelated stuff in the far by making it blurry
I did like ADOF.
Messing with SSR but CANT get it to stop making my guns look pixely...
Looks like just the Blooming HDR is all for now. Going to play a day with it. Nights don't look right yet though.
I did see quite a few blooms but Magic is another one I'll try.
Blooming HDR allows things like Battery bars and Medicine icons to glow but nothing else. Sadly the bloom works in a specific area so some spots look like actually lights and others do not.
Curious if there is anything that works with it to aloow LIGHT bloom but not ICON bloom.
So an image of a Propane tank gives no bloom but the battery bars should.
THis is as close as I get to glowing battery and medicine icons but as you see the bloom seems to have a weird FOV or frame of reference that isn't per icon. So some icons in the inventory glow but not all even if they have like icons.
I want things like the blood icon on tourniquet to glow but not the item itself.
So Im close but...no cigar.
So very close.
Still some items are a bit too intense while others not so much. That artefact in the top right is BEAT RED!
Magic Bloom is not giving the effect I'd like.
PPFX Bloom is a good one for me too. Makes Lights bloom but not icons so much.
Just can't get the right overall loo lol. If only I could select parts of the game for bloom lol.
qUINT_Solaris is okay too but none of them focus on lgiht objects and instead eventually create a complete image bloom which is not how it should work since not everything GIVES light. Yes things reflect it but I want to focus on what GIVES light, and add bloom onyl to light emitting objects rather than reflective blooms.
prod80_02_Bloom is good but still...no focus on light objects only. I might just stick with Blooming HDR for the color increase.
Why does your inventory remind me of Christmas lights? 😄
Lol. So festive.
Goal is to get bloom on light emitting objects...only.
I think I might overlap a few bloom options that could provide the effect, just going to take a bit.
Here's hoping.
i think you overdid with the bloom
I GOT IT THIS TIME lol. Blooming HDR + PD80 bloom gets me the look I need without muddying the world. Picture incoming.
Before (Default GAMMA)
After = SimpleShader
Now...to mess with Sun Rays a bit more and I think we have a solid look going here.
Psy-storms are so sick with Sun rays setup properly. Really changes the look and feel of them.
I checked the bin folder for my Shader but it's not there. Reshade says Anomaly/bin but mine are not there. I want to rename it and dlete the others I made for testing.
Also. the color vibrance can be achieved with the blooming HDR without adding bloom if anyone wanted better colors without using the VIBRANCE effect. 1 less effect running is a good thing.
Going to take time to setup ADOF. it looks so cool and useful but I just haven't found a good setting to make it look and run the way I feel it should.
Anyone with custom ADOF looks. I guess you don't need to show me the settings but pictures would be ncie to see different looks.
Also.
Anyone get SSR working without pixelating weapons?
I SOOOO want SSR to work lol.
ssr is enabled by default and it doesnt pixelate weapons
AtmosGAMMA defaults. No SSR.
SSR enabled on Atmos GAMMA.
Notice the gun is now...pixelated.
guys im using the default grim reshade, can yall help me make this slightly more vibrant and warm?
just outside of the train hanger
i dont undertand much about reshades, so im glad you can help
Im in that spot and my area is not showing any of those structures lol.
its the same as mine
Lol. My bads.
i wanna make my reshade slightly more 'colory'
This is just 2 options.
if that makes sense
Try first...
Vibrance at the very bottom
TUrn on and crank it up.
If not enough I could show you my Blooming_HDR (which REALLY brings the color)
But that's bloom oriented and very preferential to people.
is the bloom resource needy?
My inventory
damn, bro is soo radiated that his inventory glows
how in gods name u play with 2 fps??
NOOOOOOOOO
?
I take a 2FPS HIT with my shader setup
You said if it was resource needy
Lol.
;P
Haha
I average about 40fps in 1440p.
so for bloom, should i enable this?
i prefer to reduce most graphics so my games run at a stable 60 fps
i dont have blooming hdr
just this
It should be in there
probably cuz im on dx9
Hmmmmm.
Ahh crud.
Blooming HDR is what really makes the game sing in color for me.
Do you have Vibrance?
yes
i played around with it, but my reshade is still really cold
My notes for now
Okay, just crank that to max for now. That'll bring a little color back.
looks more alive now
And dont be afraid to just turn options on if you want. You can always click it right bakc off if it looks back
Reshade really is just click on...love it, leave it. Hate it, click it back off.
aha finally found blooming hdr
but nothing happens when move the sliders around
do i turn on auto bloom
First. Copy all my settings above.
ight
Take your time and copy the settings correctly. I cant stress how often people skip 1 or 2. Like Santa, check it twice for me.
Basically we just use Blooming HDR for color. Not the bloom.
Niceness.
Now I must MAKE SURE for my own sake. Did you, just to verify myself, turn off Auto Exposure?
where that at?
Just making sure, that is like the 1 setting we MUST turn off, it causes issues.
Here's a better view.
i did it, not a big difference
It's adaptive and will make things look...weird. So long as it's off you're good
Okay. Now you want the real bloom?
thx, but im happy with the current reshade
Alrighty
I assumed as much lol
Bloom is a hard sell
We got you colors though. Mission Accomplished.
btw
do you know how i can reduce this noise?
after the reshade everything is noisier
Noise...hmm. That I did not have to deal with.
I use DX11 and did not have a "noise" issue.
Can i see a complete photo.
in regular gamplay its unnoticable, but when using UI, boy is it hard to read
thx for the skill issue falco
This is my PDA with the same shader settings
Okay. Lets see some things.
First Open Reshade and Click COLLAPSE ALL.
Then Click the Arrow next to Blooming HDR.
Send me a picture of all the settings
these are all the things i use
OMG
FilmGrain what are you doing?
LMAO.
That's literally noise right there.
Lol.
Just to see if that's it but filmgrian is never a good thing for cvlarity.
IDK all the other effects
I only use 2 on top of Default AtmosGAMMA
I dont have experience in those other effects but surely onje of them is causing you the issue.
Best bet is to copy AtmosGAMMA (Make new preset and inherit) then start with JUST the 2 we discussed.
alright, will do
Good?
all good
Still can't get the pixelation of SSR to go away without also removing what SSR is there for...reflections. Just might not be the game for it.
Anyone have setting suggestions for SSR?
make sure that you can see the sky and its not just glowing nothingness
oh that just makes everything wet
theres ssr in game enabled already but actually looks good
and if you really want ssr from reshade just move sliders around
(it will look really weird)
anyone have preset recommendations for project inverno?
Remind me 😂
windows button + alt + r
And then where do you find the video?
Ok for a sec i was a bout to ask what a wideo is, then saw the rest.
What settings you use for ur shaders? Ur game looks nice from the video.
i added few things just now but i dont know how it will look in long run so im not posting it yet
Thanks will check it out once i’m home…i have also made my tweaks. They look nice too. But a bit heavy.
Yeah running at 30-40 fps isn’t that bad, compared to the visual gains
anyoone that can give me gamma atmos reshade (default) bc i screwed up smthing
You didn't read my post lol. I already said I tried adjusting and the only way to remove pixelation is to remove the reflections. So I'm asking those with experience for help. SSR doesn't make everything wet, it makes everything reflective. Wet has a thickness where reflections are flat surfaces. So metals of guns are considered reflective and thus have weird pixelations due to their curved designs.
If anyone finds a good Effect that matches with SSR to remove pixelation (maybe a noise reduction filter) then we could be in business. For now I'll ask but I will keep trying different options.
just dont use ssr from reshade it doesnt look good
I tried ur reshade btw…didn’t look great I believe because i had autumn grass
i have spring trees and summer+spring grass combined
damn how'd you do this? I'm new to modding graphics so I don't really know how, I don't wanna fuck up
hey, how can I find custom reshade configs? like atmos, phrozac? and how can I install them?
its probably tweaked preset
look at where my cursor is
I think I'm being misunderstood, I know those came with gamma installation, what I'm asking is how can I add more to those presets?
like just how to add more presets
yeah like agressor or other stuff, I see people with many different reshades
this is ini file
thanks
this is ini file
where to do I put the .ini files this guy shared?
Anomaly\bin folder
grazie
if I want to back to the default, can I just delete it? or do I need the default .ini tweaks?
Just go back to the default reshade if it does not fit your taste. See: #╟🎑reshades message
You can also find many good custom presets in Nexus Mods.
just experiment with what you like.
stalker anomaly mods on nexus is defo top 10 cursed things
DAYUM
To be honest im shocked just a shader can do that damn
shaders are the whole reason stalker can look triple a
I think its beyond triple a now
it wont always look like that though
he had to select correct position in correct map with correct weather
@hybrid quest can i get your .ini?
I adjusted Vibrance down a bit since then due to some lighted areas being a bit RED. Lol. It's a start to what i wanted and that was a more dream-like game. The bloom can be easily turned off but colors still vibrant. Just turn off prod80.
prod80 = bloom
blooming_hdr = colors
Nothing like a nice little relaxing emission to show-off a Reshade config, is there? 😎
(I hope to god they include emissions in Stalker 2 - I'd cream to see a proper blowout in Unreal 5)
What are the best reshade options to enable and make game graphics realistic asf?
Real? Ehh, I had a weird feeling that FGFX(?) can add some "realism" but I barely tweaked it. My first impression of FGFX was that it made things look more realistic. But, it also made my night SOLID BLACK. Again, I didnt tweak it much, just turned it on and looked around a bit. The items looked better in some ways.
what the kind of toz is?
it could be something with SSS
I ask asci about that and he told me that that was a vanilla ilumination issue
this too
ambient occlusion makes a huge difference
I like PPFX SSDO (I think that's what it's called). MXAO isn't bad but I find it a little too heavy (it fuckes with the inventory & menu screens quite a lot) and a little more resource heavy, but if you're open to tweaking with the settings you can find a happy medium. I use MXAO in a few other games, but I prefer SSDO for STALKER
(sorry wrong reply)
(wrong reply - see message above)
I also like a little bit of LUT, AmbientLighting, and a touch of PPFX Bloom if you reduce the bloom intensity & don't mind fiddling with the tonemap settings to get the blacks/contrasts looking noice 👌
the DoF shaders tend to be very messy and resource heavy, I find the in-game DoF to be just fine. That's just preference though
Loner heading to one of his many quest in the zone
I have enough trouble getting 1 guy to follow me even with the lowest anti AWOL settings. I can't imagine taking 8 morons with me around this place. HAHA. That's a lot of MULE power though.
some of them follow me and stay close and some of them decide to follow me but only when there's a fight xd
These 3 follow me around everywhere
the rest are brainless
lol.
I love that they help me detect people over ridges or around corners but them walking right in front of gunfire or running TO a mutant to shoot it absolutely kills (laughter of sadness) me.
Like who runs UP to a pack of dogs to shoot 1
Lol.
The companion AI is one part of Anomaly I really really need to be improved. If im in full auto they walk right in font of me and BAP, bye bye head.
Everytime I open Gamma it say the reshade has an update, 5.8.0 version, do i update it or
best solution is ignore it
bro thank you so much for this, game looks so much better now
Idk if I messed up somewhere but is there a way to make the fog not so blinding in this reshade?
How do I change that?
for me it was reducing bloom
Sorry to bother you but what sliders exactly? I cant seem to find it
i dont fucking know
how do you download and use someone else reshade?
I will work on that. There are some drawbacks as in (Helicopters can't be seen from certain heights), and fog can be...THICK, but I personally enjoy the thickness but also also, understand why it can be a bother as the games auto fog is already so much, add fog weather plus this bloom and you have something you so thick you can cut it.
The main goal was to get a dream-like feel first. I am going to keep working on tweaking the reshade to make it a bit more universally balanced.
Next goal is to adjust for darn night and/or super bright nights as NVG's can act up with the shader (I think). Lots to learn but I'll update any changes when i do.
Sounds good! I ended up just turning off the prod80 bloom and kept the colors from blooming hdr
download ini file
drag ini file from downloads to anomaly/bin
I drop the file into anomaly/bin, how to do i use the reshade? I dont see it in the home button screen
Yeah i know that I just dont see it
ok so check if its same name as other presets and if it is then rename it and if its not appearing then you either have a bad eyesight or you dont place it in right folder
ok
So uh, where did the configuration menu that should be at the bottom go?
I'm trying to install agressor, followed the stuff on the ModDB page, but I can't tweak anything or find gamma, brightness and that other stuff
Uncheck Performance Mode
Then reload reshade
Thankkks
So I'm pretty sure agressor shouldn't look like this. Before I attempt the r2 fix, I want to find the "basic light settings" because I can't seem to find it anywhere
lemme check -- they're under Video or some shit
you have to be in-game to access the basic light stuff but I found it:
you can't access this until you're loaded into the zone
Hey everyone - There a way to get a fisheye lens view?
does anyone know why agressor looks so dark?
its because its night
I mean when compared to other reshades, agressor looks way darker
Just turn on/off effects in reshade and look which one affects shadows, adjust it on ur taste
Remember, you don't need to Reshade every aspect. Dynamic Tonemap in MCM is powerful for adjusting these key scenario's.
Anyone got a good reshade preset for gamma?
Hello. Does anyone know a way to make the skybox be brightened up by NVGs as much as the rest of the scene?
Now that I think about it, it may have to do with the NVG mod and this is the wrong channel for this but idk tbh
There is an option for this in base game settings. Weather/Night options. something like this.
You can adjust the night bright/very bright etc.
I've managed to get agressor reshades to look good for scenery, but all the hud is still dark and I can't brighten it without flashbanging everything else :/
do you have performance mode ticked in the bottom right? if so disable it
how the hell is it dark
THE SKY IS CLEAR
its totaly fine, looks brighter than mine with default reshade. Check your monitor settings, it will help, also try to download ICC/ICM color profile specificaly for ur monitor
this reminds me of one of the Borderlands 2 or 3 DLCs
MCM > SSS Shadow Cascades?
Not sure if that's it but default settings are perfectly fine.
SSS grass shadows, try medium or high
Thank u both i was thinking about the removing faar shadows thing but i’m gonna try this too
So there's nothing at all in the settings that could increase only HUD brightness/gamma?
so i wanna make the game look as good as possible is this a good pick for mods?
i downloaded these, but how does one use them?
i moved the rehsade the the bin folder, but where do the fx files go?
same folder i think
open the reshade folder, then move the fx files right there
welp, lets see if autumn redux works
Bet u r encountering barbies instead of mutants 😂
black level should do a thing. Maybe brightness/contrast
did you install icc profile?
Don't know what icc is : /
google something like <<your monitor model>> icc profile
you will find someone tests
they will explain how to colibrate your monitor
and will give u icc profile
icc profile is something like premade settings for ur monitor
What do you mean?
I use atmoR+ shader as base with major tweaks to it.
why are some of my trees bright and some of them painted black in the distance??? happened to me after disabling screen space shaders in mo2 for an (quite immense) fps boost... any fixes for that?
heres another pic where you can see it more clearly
I installed Gamma and in the black windows there is an error : Unable to save shortcut.
How can I fix it?
late to reply by a couple of days, but you don't need to, so don't
unless it actually really bothers you in which case you could but you're on your own
just wait and see if Grok decides to in a future update or not
This is artwork lol. What reshade and tree mod is that?
atmospheres R+ with vibrance turned on
what is the best reshade that doesnt kill much fps
How hard does capa's reshade tank fps? It looks really nice im just afraid of getting 30 frames lol
I’m trying to play without atmospherics but as soon as i try to play i get the shader compilation error i delete shaders cache folder but i keep with the same
Could this be related to the reshade installed on root folder ?
anyone knows what could be causing this ? got inverno + graupel
It looks so pretty and happy! "La de daa, I'm off to hunt artefacts!" 😄
drew doesn't touch his gamma its just base gamma
Reshades dont cause shader errors. Other mods probably require atmospherics/others have patches for it so it isnt as simple as just removing that one mod
yea i could probably add one
thx
kinda a fan of the bright hud ngl
oh ahaha, yeah its kind of interesting, but i dont like the main menu, the environment almost fuses with it, and its kind of noticeable
but aside from that yeah i think it looks neat
yea main menu is too saturated
indeed
thankfully we dont spend much time on the main menu
yea i was gonna say its not too big of a deal
imma actually repost the video with the file too
gimme a second need to check on my dog he dont seem to be doing well rk
my first reshade
there is room for improvement obviously, such as bright ui ( mainly on anything white )
and the menu is too saturated ( and fuses with the in-game environment )
aside from that, i quite like how this turned out.
how does agressor reshade work, ive never heard of it untill now, it it like reshade or is it like console commands
@meager smelt its a reshade (mod) you can enable in mod organizer 2. but you have to disable some other mods in mo2 for it to work, so better watch a yt vid if you want to try it...
how do i update reshade to 5.8.0 like it says in the menu?
im wondering the same thing
i assume it is just download and replace but idk if its that simple
i have a seperate reshade standalone program i use for other games and it is the 5.8 version but im afraid ill break gamma if i use it. i cant find and reshade application inside any of the gamma files. so thats were im stuck at
ah right
what reshade do u guys reccomend for 4gb 3050, id11400H (2.70 GHz), 16GB RAM
idk anything about reshade and how it works
all ik is it makes game look more realistic
If I remember correctly (this is how it was pre 0.9), the Agressor in Gamma is only textures, you'd need to reinstall it and follow the instructions on the moddb page to set it up correctly, its more than just a reshade preset.
The included AtmosR looks nice and doesn't impact performance a lot, if at all. You could give Capa's reshade a shot, but you might need to disable a few effects like MXAO/GloomAO to get a playable framerate. With Capa's reshade I was getting around 103-110 FPS, after disabling the two AO effects, I sit around 140. I'm running a Ryzen 7 5800X3D and RX 6950XT though, so your results will be vastly different
thanks mate

Had something similar happen when messing around trying new shades settings ... clearing the shader cache sorted it out for me
Ill give that a go, cheers
moving over here so I don't keep shitting up screenshots
@mint owl I could only find this for golden autumn
https://www.moddb.com/mods/stalker-anomaly/addons/golden-autumn-retexture-v10
and I don't think it's the right one, cause
4 days
Hey Apollo nice to see/read you again. I often used your Reshade from last year. And from time to time i even use it nowadays. 🙂 Capa`s Reshade looks great but it can really tank fps. I modified Hippos AtmosFilm Reshade at one point to get a similar look. I modified PD80_02_Bonus_LUT_pack and tried alot. I have chosen PD80_LutSelector=43 to get a Capa Reshade look alike. And for me it gets the job more than done without too much fps tanking. No offense against Capa or his great work!
Does Immersive MXAO tanks as well ?
I'm using quarter rate
oh yeah i should try disabling the AO
I got similar specs to you
just aa bit older
You have similar specs and are getting 35 fps?
I'll have to give it a shot
well a few years older
i got an r7 3700x
rx 5700 xt
16gb ram
i should prolly get 32gb
surprisingly i get the same fps with the original gamma reshape tho
Currently using it for my own preset, much better than normal mxao
is that like a mod
Probably a bottleneck somewhere
maybe
Reshade effect
I do as well
anyone gotten agressor to work>
I used to run Agressor pre-0.9, if you follow the instructions on the moddb page you shouldn't have any issues
if you need a more performance friendly preset, I modified Capa's to remove the fancy effects. It keeps the color grading and overall vibe, and gives back ~25-30 FPS for me
before and after
I am GPU bottlenecked so it might be less of a drastic difference for you
hmm ill try it if just disable mxao doesn’t help much
looks pretty close for both pics
are trees and foliage at a distance supposed to look kinda flickery and crusty tho?
i tried turning up anti aliasing
didn’t do much
like the edges of leaves when i move around
yeah in-game AA isn't very good, I use SMAA on very high and it has barely any performance impact but does an okay job
to truly get rid of aliasing you'll need 1.5-2x upscaling like DSR
I tried DSR a while ago at 1080p and it just deepfried my game and made it a lot worse, idk what the hype is about, maybe I messed something up
this is a great alternative thank you, went from 30fps to 55-60
DSR?
Is it like AMD FSR
wouldn’t upscaling ur resoulution by 1.5-2x basically half ur fps
I disabled a bunch of the effects, HDR, contrast, lighting-related, but kept the color and regrading effects
ah ok
also what’s ur opinion on adof
i don’t think it affects fps but it kinda makes things blurry and for me fucks up the inventory and settings ui half the time
I think in-game DOF is good enough with SSS, I have it cranked to max for ADS
yeah reshade DOF is inconsistent, I don't use it
i’m tryna figure out how to turn off sss dof
unticked everything and dragged the sliders down
dof still turns on
i might try playing with a bit of dof tho
whats the default settings?
you can set the intensity/blur sliders to 0 it should disable it, and turn off the options at bottom
these are default SSS settings:
how do I install agressor reshade do i just enable it here?
I waa told its textures and not a reshade right?
its just the weather and textures
and do I just click enable is there anything I need to disable
If you want the full reshade, you need to redownload it and follow the instructions on moddb
so I just want the textures and weather so do I just click enable
and is there anything i need to disable I was told I need to disable a few mods
and got +10-15 fps
now im hovering 40-45
pretty good
turning off mxao and gloomao didn't change my fps at all in the original tho
btw where do i find immersive mxao
Have you disabled "Distant Shadow Culling" by any change ?
i got it on
alr
nothing changes
not even fps
it looks pretty fine i guess
im just tryna get to 60 fps rn
I think it was part of Atmospherics 1.83.5
adof looks weird with the performance preset
holup maybe my stalker just needs glasses
where
i need that
how graphics
send file
ADOF isn't necessary, but you can tweak the value
fADOF_FarBlurCurve=2.600000
Press home
Go into reshade effects, search for Adof, and tweak the value to what I put above
alright ill try that
yeah played with the blue curves
doesn't really change much
just how blurry it always is
not when im focusing at something
i prolly won't play with it
Sounds like you're cpu bound
maybe
what settings did you try?
I tried 2.0x and 33% sharpness and it was noticeable but not worth the half fps loss
1920x1080 vs 2715x1527 (2x)
Where is the capa reshade download or files located?, I'd like to give it a shot
Drop the ini in your bin folder, drop the 2 additional effects in your reshade-shaders folder
Good lookin' out, thanks!

If your Motherboard supports it try to get an ryzen 5700x. Normally a bios update is necessary and will do the trick. "Cheap update" and will double your fps in GAMMA.
Or you go "all in" for the 5800X3d! This will help a lot! 😄
I use a 5800H (laptop version, about 10-15% less performance), but still get CPU bottlenecked in Stalker Anomaly and it seems that I can't go above 55-60 fps :/
Do you know if DLSS will somehow be added by a god modder or is this out of the question ? It'd help a lot for those like me playing with higher res.
Its both: i nearly tripled my fps in GAMMA with high settings upgrading from Ryzen 1800X and GTX 1080 to Ryzen 5700x and RTX 4070.
it's a beast, highly recommend especially if you can find one on sale, prime day and newegg's sale is on right now
easy 120-140fps at 1440p, even in dead city and rostok
For sure it is. Personally iam totally fine with my 5700X but if had to update now i would chose the 5800X3D. Best money value thing to give your "old" amd plattform 2-3 years more.
Same here, went from 4770K to 7800X3D, and doubled my FPS everywhere on 1080p with just the platform upgrade
I think it looks great. Funny. I could imagine something like the Doom 2016 weapon wheel slowdown with this look 
yeah it looks fine but i’d rather i be able to see lol
the thing with dsr is that ultimately it's either using a lot of AA on native, or less AA on DSR, then see which fps/quality ratio you can live with
you're using 2x, you should use 1.78x if you want 2K (1440p), you can also increase the smoothness, it'll blur the image, but for stalker it's worth it i'd say
Went from gtx1070 / ryzen 1600
To gtx4070 / 5800x3d
Can confirm the fps gains were worth
By the way, I haven’t actually messed with reshades with the new build yet
Anyone have suggestions for the best graphically pleasing reshade?
capa's reshade
$630 for a 7800x3d
wild
5800x3d for $430
ngl i should prolly upgrade my ram to 32gb first
It was a once-a-decade upgrade
so price wasn't an issue if it's gonna last me 8-10 years
I still have to upgrade my GPU though
yeah i guess
ive been running an r7 3700x 16gb ram and rx 5700 xt for about 4 years
Ah makes sense
ah fellow resident of the country of inflation
I just built my R7 5800x3d/RX 6950xt system about a month ago and so far has impressed me, I upgraded from a R5 1600x/RTX 2060 so the difference is crazy
Would've gone with am5 but it's still in its infancy and I for sure would've run into some issues knowing my luck
lmao i was also planning on upgrading cpu/gpu
i also have a 2060 and a r5 1600
so what resolution are you playing and hows the performance?
Yeah I remember talking with you about performance about a year ago cause we basically had the same build
i wanted to upgrade the gpu only, but then realized i would also have to change the PSU but the cpu will bottleneck and bla bla bla
I get around 120-140 fps in most maps at 1440p using Capa's reshade with MXAO/GloomAO off
so it's better to just build a entire new pc
Yeah exactly, a whole new rig is the way to go
yeah I also have a b350 motherboard so yeah its 100% a new rig for upgrading
I wasn't sure if it's worth upgrading to last of AM4 something like a 5800x3d with a 3090/6800XT or go AM5 and buy a 7800x3d
I decided to play it safe with AM4 and it'll still last years for sure, but if you want to upgrade your rig overtime in the future AM5 is probably better
Also like I said AM5 is prone to issues since it's still so new so that was a major reason why I went with AM4
one concern for me in upgrading is the resolution, I have a 1080p display but can't find any decent price on my country for a display thats 1440 or 4k due to taxes
will probably stay on the 1080p and use DSR/VSR and force 2k or 4k
ah that sucks balls
with a PC that beefy, 1440p or 4k is a must
but ig 1080p upscaled isn't too bad
you could drop in 5800X3D in your mobo and keep your RAM, but if you want a complete new system, at this point AM5 DDR5 is the way to go
I personally haven't had issues with AM5 platform, just have to flash newest BIOS once and you're set
I mean it's not bad, it's still top of line performance which will last you another 5 years
I could still technically upgrade it, just need a new mobo, ram and cpu
this is my current build, only that now i have a rtx 2060 and one more 8gb stick so its 2x8
I shared it on the buildapc discord and instantly got told to just build a entire new rig lol
You would need to upgrade so many pieces of it anyway
How's your case and cooling?
good i guess
didn't install any extra, only the ones that came with the case and seems to run good on temperatures
Temps were good for me as well, but these newer parts get fuckin hot
so much hotter
yeah I read that the 5800x3d doesn't come with a stock cooler
and you need to undervolt? it, even with cooler bc it gets hot
saying that if you undervolt it, performance is the same but temperatures get lower
I undervolted with the bios setting called Kombo Strikes
Yes performance is relatively the same and temps could get up to 5-10 degrees cooler
The real heater is the gpu
Playing stalker it gets up to 80 degrees on the hot spot, even with an undervolt on it
Cpu isn't too bad at around 60 degrees
I have extra noctua case fans and a beefy noctua cpu cooler as well
if you have it, could you send me your current build list?
haha
to have something as reference if I decide to go with am4
thanks!
Same here, using good ol NH-D15 from old PC, 7800X3D never goes above 75C maximum under load, average 55C
Hehe running NH-D15 and noctua case fans too. 😄 CPU gets up to 75-80 degrees because i run a very low rpm and my gpu (RTX 4070) never goes above 60 degrees @ 170 power draw. Case is fractal define r5.
I upgraded from r5 3600 to 5800x3d and its good, it solved all my stuttering issues in gamma. Have 2nd hand 3080. I have 16:10 monitor (1920*1200) and I downscale from 1800p. I play at 60fps locked. CPU is undervolted using Kombo at lvl 3. It stays cool with big old Noctua cooler. 32gb ram cause its cheap (3600mhz) - for Gamma, this is very nice setup. My 3080 is heavily undervolted to 825mv and 1800mhz. So it went from 350w to 250w at max load, with cca 2% performance reduction, recommended 🙂
nice, 16:10 is an underrated aspect ratio, fps locking definitely helps with the smoothness, less 0.1-1% lows
hey, does anyone know the fix? performance mode is already off
what can i enable to make it more foggy?
16:10 is superior to 16:9 - its a shame we went the 16:9 route - its just because of the consoles. When u get used to 16:10 u are doomed :X there are hardly and good monitors in this aspect ratio being made. The only quite ok one was Asus ProArt so I bought it, but it had so bad image, I stayed with my super old Samsung SyncMaster 2493hm :/
weather settings turn down the fog distance
I think I had a 16:10 syncmaster also! RIP 
Are there solutions for reshades that negatively effect the UI? health/compass etc?
I have a custom config I really like for the rendered game but it makes tends to impart weird effects on my UI.
Yeah its the gun being weird
Different guns have different quality meshes etc..
ah ok, make sense
what is the config ?
@mint owl I think I might be missing something, idk
(I don't know where to find capa's reshade)
Did you delete the shader cache ?
Also
#╟🎑reshades message
I had no shader folder in the anomaly folders
So this is a reshade that has gone wrong ?
technically this is hyperbole because I just swapped to a random reshade
since I didn't have capas
Yeah, but what happened to this one ? x)
idk
It's the same ingame ?
just went blue
I haven't been able to launch an actual game yet because it keeps crashing because of xml shenanigans 
What does the log says ?
Did you try a DLTX HUD or something ?
only aydins
I have Aydin's HUD and nothing got destroyed, what are the mods you have added or disabled ?
If none, then I'm afraid a full reinstall will be mandatory
hello i have a question, im playing on dx9 and some of the assets that are to be loaded on reshade are stuck on 12 assets left to load, its on the top of my screen, its annoying, and i cant do any reshade changes because the list wont show up
i am a bit new but what is the blue client u guys use and where ccan i install it
tf is blue client
The reshade home button menu
this where can i install this
press Home on keyboard
its default in gamma
oke thx
install extremely based capa’s reshade
wat is beter bloom or blooming hdr
I saved a custom preset and now all the included presets are gone.
The preset selector is showing Gamma/overwrite/bin as the selected folder, do the standard included presets live somewhere else?
Edit: figured it out: Gamma/.Groks' Modpack Installer/G.A.M.M.A/modpack_patches/bin
My spring reshade using base Gamma and atmos with AtmosR 'cfg_load atmosr' in the console, needs reinline and filmicpass.
Will try this out tonight, thank you capa
preformence hit?
if i delete shaders cache does that mess anything up like my current reshade?
In launcher anomaly?
in the file explorer
Then I don't know
ok nw
no
random ass duty accidentally shot by me in the head and killed me lol
Is gamma using "cfg_load atmos" by default? Just in case I want to switch back?
yep
Thanks 
what do u guys recommend for a performance friendly preset?
for context i have a R5 2600, a 1050 and 16 gbs of ram
Hey guys, I have been messing aroung with "Gloss Factor" a lil bit and now I have white dots on grass etc. everytime I turn my headlight on. Can anyone help please?
r2_gloss_factor 0.23
r2_gloss_min 0.18
type that ingame in console. remember always make backups before you change anything.
yeah that fixed it thanks 4 ur help!
guys what is the location of reshade folder?
Anomaly bin
Oke thanks
Is this the default grass that comes with gamma?
I think so
Just turn up grass density/ height to have something like that
I gave the capa reshade a try, and it’s really nice but eats about 40 frames for me so I just can’t 😔
how make aggresor reshade work ingame
i really like this. looks great and runs the same as it did before, thanks!
Try turning off GloomAO and MXAO, gave me back around 20-30 frames
Neither of those seem to be part of this reshade
