#🔨base-gamma-support
1 messages · Page 263 of 1
when it says do not extract, does it just mean do not extract until theyre in my gamma/downloads folder?
I'm getting this error whenever I try to reload or exit jupiter, my body health is bugged and show everything as damaged too.
i mean don't try to open it up and extract the files that are inside. keep it as a .zip file or whatever you downloaded it as
Hi everyone, i ticked the "ammo checker" and "Compass instead of minimap" mods for gamma, turned on the minimap on the game's settings and now i get an awful framerate on the menu and in the game
like 5 fps
I tried turning off those mods, disabling the minimap but i can't seem to fix it
Uhh, I have around 420 mods active
this may have been a previous problem but my game keeps crashing whenever an emission happens and than it corrupts my last save file
!crash
post the log
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
yes
!default
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
the thing only started with 351 mods

They don't call me smart for a reason
so you thought enabling all will fix it 
Listen okay
I will brute force my way into the game eventually
!blackscreen
Follow this: #╭📖faq message
Cool, I won't help you anymore then 
wait wait wait no no no no
the council has decided your faith 
I beg

Thank you
Now to figure out the paths..
Now I have a very important question, in MO2 what should the Binary be and what should it start in
just checking if anything is fucked
binary should point at the exe
start in should point at the bin folder
My game crashes right on startup.
Tried deleting everything and followed the guide, step-by-step and now I'm not sure what I'm missing.
this happens when im using wishgranter ;c
everything seems fine 
@wheat pine
XD
screenshot the entire MO2 for me
well, that would make a sense if i chose zone disapear...
that's what happens almost for all the wishes. I think only 2 or 3 options don't crash the game
pretty dissapointing id say 😄
the game has launched
Just cleared it kekw

!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
quick quiestion i accidentaly skipped the "download gamma data" button and did the install first so do i need to do it now?
Looks better already!
first of, go to moddb.com and check if you are flagged as a bot
it will be obvious if you are
i dont think so the page looks fine
wait 30min and do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
We strongly suggest you use mirror 127 or 128 when you do.
I'm in! Thanks!!!
noice, now remove your newby tag in #⏩start-confirm
i have to download it all over again?
more or less. It's gonna check the already downloaded files and download what you were missing
I'm getting this error when I try to start the game
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
anyone know what causes the CD Fatal errors
ive been getting them more more the farther north i go
It did not work
who posted that?

@stiff raft @hushed verge screenshot MO2
also when i redo ll this do i need to click the allow powershell and launch MO2 buttons?
Mines not working
nah
ok thx

does anyone know how to return to the original GAMMA Reshade values? I messed in the settings and return to default was not a return to the original gamma ones
Nvm I got it to work
I'm not sure how to unfuck Reshade messing about...
Try this
!shader
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
hey boys i have a problem. I updated the game and now it crashes every ten seconds. unplayable. On the right side of the gamma launcher where it says downloads --> all the downloads are marked with a red triangle. Is that a problem ?
should i send a screenshot for better understandung
ing ?
screenshot the entire MO2 window.
The errors in the Download are fine
guys all of my scopes are now yellow help pls
don't pee on scopes
!shader
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
its fixed tyvm Grim
!k98 you can restore the reshade settings by doing this
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
what in the goddamfuck is that?!
?
are you trying to launch the game from your Systems folder?
i guess
@narrow sparrow

Am I missreading that?
any ❌ in MO2?
Dont really know what working directory means but its not the install location
just the inactive ones i think?
I thought it always being where shortcut is located
it's where the Shortcut is located I believe
go to moddb.com and take a screenshot of what you see?
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
We strongly suggest you use mirror 127 or 128 when you do.
do you have any ❌ in MO2?
my game has been fine the entire time since i first installed it about a week ago and ive only gotten the fatal errors more frequently as i got closer to CNPP
lucky you, no fix the game properly 
so youre saying its an install error? gotcha
what do you mean ?
you have anything like that in your MO2?
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
We strongly suggest you use mirror 127 or 128 when you do.
how do i fix this ?
why where you so supperised then ?
it's not suppose to be like that technically, but it also might not be an issue
alright ty
yeah same tho
im only seeing the gamma client
where can i find the mirror
well im looking in the discord and there is not mirror i n there
yeah exactly saw vid from like a month ago and there is a seperate download for the addons
for the addons
Hi guys and gals, i was wondering whether i needed to do anything if i wanted to install stalker expedition graphics mod for GAMMA?
yeah me and keezo on the same place
There are 4 separate mirrors to download the gamma installer not sure what you're on about
there is the rc3 and then the addons aka mods
Follow #old-how-to-install any video guides are outdated
theyre seperate
No they are not
so rc3 is the only one i need?
gamma addons isnt used anymore
Read the instructions
dude okay haha chill we was just wondering
thank you @narrow sparrow thats the answer i was looking for
exactly
yeah lerb bein a dick
What the
lmao jk i just wanted a strait answer
Yeah i told you three times
thanks for your help both of you
NP have a nice evening
what should i do?
Disable Gamma loading screens - cs eden or use Dx11
hahahah i hope so now where my yt vid is outdated
Hi do I need to do anything if i want to install Stalker Expedition graphics mod for Stalker GAMMA. OR if there is any other graphics mods that are compatible? thanks
!k98 do the steps below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
thank you
whut is warfare
I've been getting this error
@vestal kayak @naive shard
#old-how-to-install

don't watch a video about installing gamma
You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
Having 357 mods downloaded issue as well, have modlist saved to desktop. should i post it somewhere, or did the issue get fixed somewhere above and i should just search for it?
i got an error that said something about 'guass' missing
!bas
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
well it was working fine for a while after doing that, but it just happened again, I got an error message though which wasn't happening before
seems to only happening when fighting duty soldiers? I don't know if that's just a coincidence
That error usually happens when you headshot someone, but the mod responsible for it is lower in priority than texture mods
So it's either
- A corrupted mod
- Added custom textures
hmm I definitely don't have any custom textures, and I did a full reinstall so I have 358 mods now
358 now, thank you
@tender forge would I be able to manually change the priority?
!152
You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
what should if i get this error
Anyone know what causes this? I reconfirmed that I properly updated to 1.5.2
Can somebody please help? My game has constantly been crashing for no reason. I installed the hotfix yesterday, was crashing randomly before now its crashing 5-10 minutes after loading in. I have 561 active (stutter, mags, ammo check and trader destock.
i did all that and the game keeps crashing 😦
Check if you are blocked from accessing moddb.com
havent been getting a response
how do i do that ?
go to the website 
no i am not
alright, I'll leave your issue for Grim then, just wanted to see if you might need a specific quick fix
@junior moon can you help then in the custom channel?
Sean
ight bro
- Do you have #📍577-mods-in-mo2 ?
- Do you see any ❌ in MO2 under flags ?
answer both, 1 and 2
Alright for the first question
i did gamma install couple of times
it just won't go over 355 active mods
so i went to faq
it says to download those mods manually (the mods that are missing)
which I did and put them in the corresponding folder
the game works, however I get that error
when I enter Rostok and maybe run for 10 meters
I need to make sure your install is clean and up to date:
Check if you are blocked from accessing moddb.com
If yes then wait for the indicated time + 40 minutes.
Then do exactly this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Change ModDB download mirror from Default to 128 or 127
- Click "Full G.A.M.M.A. installation"
so I keep getting error 948 when trying to disguise in bandit armor
- Do you have #📍577-mods-in-mo2 ?
- Do you see any ❌ in MO2 under flags ?
answer both, 1 and 2
1
2
I have all 358 and currently have the x on audio, visual, animations, and gamma disabled
Check if you are blocked from accessing moddb.com
If yes then wait for the indicated time + 40 minutes.
Then do exactly this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Change ModDB download mirror from Default to 128 or 127
- Click "Full G.A.M.M.A. installation"
got it re-installing now thank you for the help
The loading screens are insane is it how it should be ?
But it worked first time thanks to y’all for the help
Help me 😢
- Do you have 358-active-mods-in-mo2 ?
- Do you see any ❌ in MO2 under flags ?
answer both, 1 and 2
Only there or there are more?
Screenshot your mo2
How can I update this ?
only there
@tender forge can you help in custom?
Negative
@narrow sparrow thanks for the shader help. Coming in clutch today.
You didn't answer how many active mods you have..
bro so whose supposed to help me then ?
?:)
oh sorry yeah just the 358
...
!bas follow instructions below
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
Do this then.
https://www.moddb.com/mods/stalker-anomaly/addons/blindsides-weapon-reanimation-and-rebalance-jsrs-patch
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into your GAMMA\downloads folder. Overwrite if needed.
Run the GAMMA installer as ADMIN.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
will do thanks
Someone is trying to help you, but you keep sending empty logs.
When you crash, send a log there...
check the chat i did
he said to ask a helper
Wanted to ask earlier I had a issue with a crash found out some mods didn't seem to install correctly as they have the Red X with "No valid game data" error and they are empty. The question I had is do I need to completely delete my mods and do a reinstall or would the "Full GAMMA installation" button fix that issue without needing to wipe my mods and install?
you asked help here before, you got sent to the custom modlist
we can only offer help with resetting modlist to its default state 
who can help in custom?
!full
Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.
Alright that to me says I can run the full and it should fix the issue thanks
pretty much
try running full gamma instalation with moddb mirror 127 or 128
Ahh I already hit the button. If this doesn't fix it I'll try that
???
do not.
I was just wondering what that is
Stop spamming in #🔨base-gamma-support, your issue belongs in #🔨modded-gamma-support keep it there
nobody spamming he didnt answer the question
who am i supposed to ask then for custom help support if its not a helper?
Nobody is going to help you in #🔨modded-gamma-support, that is where issues go to die....
If you get lucky then you might get some help but most Helpers specialise in the default modlist.
Some modders and experienced players do help out in there
modder told me to ask a helper
probably because again you've been sending logs that didn't contain crash info
You could reset your modlist and test if you still crash, if you do then we can help you
Only getting black screens bro I restarted once and now it’s like this everytime , sound works properly in background.
!blackscreen follow the link below
Follow this: #╭📖faq message
But it all worked before restart I don’t get this man
i did lol
i followed the command is it not the logs in the anomaly folder?
The logs don't always help, especially when using a custom modlist
Unfortunately just running the installer again for Full install did not fix it and I have been unfortunately flagged as a bot which is understandable as I think this is the third time I've tried a full install in like 3 days?
I'll have to retry it with either of those specific servers when moddb has deemed me worthy to try once more.
ill reset and see if i crash again
I cannot fix the black screen man it worked all probably before restart I don’t get it
Before you attempt again, once your time out timer expires, disable your antivirus, and add your anomaly and gamma folders to the windows defender exclusions.
AV tends to mess up with mod downloads and in extreme cases outright block connection.
I only use windows defender but I'll try that
Either use DX11 or disable this mod:
Is it possible to only have the HUD show when in the inventory?
It’s all working now deleting the shaders made it working for me , sorry for being annoying. I’m just so flashed in how much work is in this mods , I played anomaly vanilla a lot and the difference is huge.
Not sure exactly what you mean, you can disable the hud by pressing 'Numpad ENTER' and 'H' a few times
Is it ok if My stalker gamma doesnt show up on my desktop?
GAMMA does have 358 mods
tons of mods
!shortcut you can also just launch the game from MO2
The installer didn't create a shortcut for G.A.M.M.A.: #╭📖faq message
I want it so that the HUD is only enabled when in the inventory. I would set the hud swap button to my inventory key but since it cycles between 3 states instead of 2 that doesn't work.
can't help you there, sorry
aight, I'll keep looking around
I guess, alternatively, is there a way to have the h key only swap between enabled and disabled instead of the third limited hud option?
Yeah man I find it so crazy and it’s all free I’m not sure if some people are aware of much much hard work is in all this. I’m really fascinated
Having issues with super long save and load times out of nowhere. Tried running the game in DX11 non AVX but that didn't help.
Hey, I just installed, I double checked I have all the correct files, the installer didn't give me any issues, but now it crashed whenever I try to start, I tried to look back through older messages, but I could not find anything helpful to me
i am having a problem when the game launches to the small screen than it just does not launch
Yeah, same for me Moot
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
what
!k98 follow instructions below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
but they are in there already
Screenshot your anomaly folder
Do I need to restart MO2 before trying to launch again?
Wouldn't hurt
You still haven't sent your crash log
how?
can you vc so i can just screen share
Sick, booted to menu, hopefully I won't have anymore issues, thanks S5
One last thing, whenever I stream gamma my friend says he can hear it but its just a black screen, is that a discord issue or gamma issye or both?
cuz i am so confused
... fine, if you have such difficulties following the instructions
so i downloaded everything everything looks fine 358 active 1.5.2 and the game still crashes on launch. ive done the "do this if it crashes" and nothing worked
but if i launch normal anomoly it works so
how come 7zip is recommended over winrar?
Bro this shit is so immersive I’m pooping my pants
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
!7z
Anomaly and GAMMA use .7z, this is the file format of 7zip.
WinRAR does the same thing, yes, absolutely, but you can have problems along the way.
So, it's better to use 7Zip.
i dont get a crash log tho it just crashes and doesnt show anything
cool thanks
actually i dont have log or txt
read the bot message again, and paste the log file here

Need help plz. followed installation instructions. Start game and crashes at splash screen. Fatal error line 400 assertion failed. no "log" folder in appdata. all 358 active. everything went as it should except splash screen crash.
so like do i create a new folder or what do i put it in?
whats it mean dont send anythink with bkp do i delete it or what? idk whta it wants me to send
i do have the third one in the logs folder though\
name no file extension
and if so what channel do i send it in? this one?
cant open head damage 17 is what it says
Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report
!k98 so again, follow instruction below ⬇️
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
idk if am in the right place but can i reinstall gamma and anomaly and copy back my saves when am done?
ok i did it do i try launching again?
yes
yes, just don't forget to back them up first
!save
If you want to back up your saves:
- Go inside your Anomaly folder
- Open the
appdata/folder 3) Backup the folder calledsavedgames
okay thank you
@tender forge it worked thank you so much
#⏩start-confirm ⬅️ remove your newcomer tag
Thanks slim. It worked. Is 358 loaded mod a problem?
Nope that’s the right number !
thank you

Need help plz. followed installation instructions. Start game and crashes at splash screen. Fatal error line 400 assertion failed. no "log" folder in appdata, only 1 file. All 358 active. everything went as it should except splash screen crash.
Most of the times it indicates a permission issue but it could be something else as well
Possible fixes
- Where do you keep Anomaly and GAMMA? I need the complete path of both folders
- Do you have sufficient permissions on your drive? Are you the admin? If the answer is "yes", are you sure 100%?
- Try to run Mod Organizer 2 as admin
If nothing works, install Anomaly and GAMMA on another drive if you have another one
E:\S.T.A.L.K.E.R & E:\GAMMA Install Absolute admin, tried run as admin anyway to humor myself. Will reinstall
While reinstalling, try keeping the folder names simple, like E:\Gamma and E:\Anomaly
@tender forge Found solution. When starting Anomaly for first time, it needs to be made clear that the game needs to be loaded to main game screen and then exit, not just launcher and exit as I assumed. Certain files need to be created before GAMMA patch. In case anyone else gets same error. Thx
I gotchu, role removed
appreciate u thx man
@junior moon you able to tell anything from that log?
not at PC, can't debug
Hi all, just curious how to edit other SMG's to be used one handed. I'm editing the weapons .ltx, but changing slot types etc doesn't work. Is there further editing needed elsewhere? Thanks.
quick question, should I be worried about not updating the game? I opened the game right now and on left corner there is a message saying there is an update for this game but idk how to update this game lol
nvm i found the tab of how to update
updates are posted in #📢announcements what you're seeing is the Reshade updater, don't update that unless told to
also, remove your newby tag in #⏩start-confirm
edditing the .ltx doesn't do anything from what I've heard. You'll have better luck asking in #🔨modded-gamma-support
Thank you
my game crashes as soon as I open my new monolith save no error message or any thing like that
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
screenshot MO2
what is MO2 exactly?
go to moddb.com and take a screenshot of what you see
FULL INSTALL:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
We strongly suggest you use mirror 127 or 128 when you do.
Hey guys is my gun supposed to have this debuff despite being in perfect condition? (all parts are 99%).
Am I missing something?
I think that is comparing itself to something else in your inv, because there is no way it should have 189 dmg
Yeah it would be to overkill for a pistol lol.
Maybe its a bug with the values? In details its supposed to be 21 damage total, but its the only gun with a debuff despite being in perfect condition.

it's not breaking your game, it's not my problem

Thx for the support, not a game breaking problem anyway
post it in #1040164855325409310
thank you, sorry for using the wrong channel, im new to discord in general
all good

What file modifies the npc accuracy and reaction times?
My installation is getting a 503 on a bunch of the packages. Is that normal?
I have Animations crashing my game
not sure whats causing it but game randomly freezes completely and the only way to end it is through task manager. It runs great for 1-2 hours and then with no warning freezes and I have to restart. any help would be great
Any way to make the toggle/switch scopes bind in MCM actually switch with extra scope in inventory instead of just toggling scope on and off?
Just found out i need to double press. Still though, can I set that as the default behavior for single press? I'm not on pc rn, would be nice to know for later
is something wrong with the installer? ive been trying to install all the mods for a week now and i cant get all 358 mods in my folder
!dependencies install DirectX
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
Is there a way to edit faction relations with a command? Im playing as a new Merc, and dont want to be allied from the start with Clear Sky.
Thats just on target, and just for my character, not the faction as a whole.
ah
how to update from 1.5.2 when everythings installed already
do i have to start all over
anomoly works fine but wont update to gamma
@proper notch here
ah thank you someone help please the goddamn game is launching in a tiny widnowed fucked resolution again, i cant reach the resolution to change it. can i launch differently?
thank you sir 
so how do i get medium armour repair kits? i know i can make one but its expensive for me since i'm in the early-ish game
hey, so uhh, whad do i do with gamma_definitions?
when the installer says "installer can hang but continues working" and the progress bar is filled, is the installer done working?
This is more like an question but what if I turn off gamma economy?
how do I fix this?
Stalker duty girl?
I have all the mods installed
Im able to boot the game up, but the game crashes at the loading screen
stalker duty girl sounds like a baddie fr fr
I just want to play the game
me too chief, me too
same here
literally followed the instructions word for word, still doesnt work
lol same
then I get the stalker duty girl error 
welcome to the "can't play the game despite following every instruction club" 
can i join
more the merrier
same, but I got the stalker duty girl error 
Still having this issue when getting a headshot, Ive done a full reinstall of the mods (358) and I don't have any added textures
im now convinced this game is just a large gaslighting campaign
heres my ticket lol
damn you commander drewski, making the install look easy as 1 2 3 
group prayer in install support vc?
who we praying too 
whoever is listening tbh ;_;
i only wanted to get mauled by mutants and roasted by radiation 😔
🤨 📸

im gonna make a stalker duty girl creepypasta
Those having problems, have you scrolled up and tried the standard fixes? The !152, !full, !k98, and !dependencies install DirectX fix many peoples' installs.
thanks
Cleaned up a little bit to unclog the channel, go in #🤖bot-commands and use every command you want in there 
yeah sorry, thank you
You don't need it
oh okay
So now that I've checked everything in the help commands and downloaded the dependencies i should rerun the installer?
I haven't followed the entire conversation but reboot your PC and try again
alright
weird, now running doesn't work, plays an error sound but no popups and it won't start
before it only crashed when i tried to start a new game
Use #🤖bot-commands please
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
hey folks, so I am having an issue where only 348 mods are enabled at launch, as I understand it needs to be 358. I just updated after having not played for a few months. I have tried running the full install (prior to issue start) the addon install and the md5 check. What do I do to fix this?
I'm having a very strange issue with my game. I am currently on the Mortal Sin: Pre-emptive Strike quest and I am attempting to enter Lab X16 in Yantar, however when I hit the load zone for the lab, the game loads, and then loads Yantar again. I have done several things in an attempt to fix this.
- I have left the area and returned
- I have relaunched the game several times
- I have installed the latest updates
- I have done a full install of GAMMA again
and yet I still experience the issue of being unable to load the zone properly. Moreover, the game resets my artefacts from high 90's to 12-20% condition, but my loadout remains the same otherwise. This is with #📍577-mods-in-mo2.
@grizzled spindle
Check if you are blocked from accessing moddb.com
If yes then wait for the indicated time + 40 minutes.
Do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
okay im here
how do i open it as admin
right click on the exe and there should be a section
Please wait for the helper, who is a native speaker of the eng language, he will help you
okay thank you
anyone know why i cant reload this without having to open my inventory and drag it over, is it because its a rpk mag? If so what mag do i need for this?
no mag works with normal the normal reload key
im having this strange issue where the kar 98 isnt loading
like i can equip it but i cannot actually pull it out
i think i broke something
noticed a lot of people playing have cool animations for the backpack and equipping stuff, i dont have that, is there a setting i have to enable somewhere?
i believe its a mod i dont know which off the top of my head tho
yeah i thought it was a part of this big gamma pack thing
yaa my animations crash me
Hello, I tried the "copy these three folders from G.A.M.M.A. to Anomaly" and the "full gamma install with antivirus turned off", but I'm receiving the 204 fatal error.
problems
!verify
Don't verify stuff with the Anomaly Launcher.
YOU'RE NOT PLAYING ANOMALY VANILLA.
It's a mod pack, you're using Mod Organizer.
a
e
!questions read and answer
Please, answer these questions, help us to better understand your problem.
Your Anomaly folder MUST BE CLEAN. NO JSGME, NO MODS ADDED BY YOU, NOTHING. CLEAN. LITERALLY JUST EXTRACTED CLEAN.
- G.A.M.M.A. doesn't work with Anomaly 1.5.1 anymore. Have you updated to 1.5.2? (if you didn't, type and send
!152in #🤖bot-commands) - Using Windows 7 or Windows 11 instead of Windows 10? Go in #🤖bot-commands, type
!windows7or!windows11 - Do you have Mod Organizer 2 (MO2) installed in your computer? If you do, UNINSTALL IT
- Where do you keep Anomaly and G.A.M.M.A.? Make sure everything is separated, they both need a singular folder, don't put everything inside ONE folder.
^If you're using Desktop/Downloads/Documents/One Drive/Program Files or Programs Files (x86), move everything out of there. - How many active mods do you have in your mod list? The default is #📍577-mods-in-mo2
- Have you enabled or disabled something? Can you see any red crosses (❌) in your mod list?
(I'll add more if I can think of any, suggestions are appreciated)
1, yep
2 using 10
3 ah, how?
4 yeah, segregated
5 reinstalled gammer, so still 0
6 still not installed
ah, well
i deleted gamma, but
would that mean that i still have MO2?
like, some where?
GAMMA have its instance of MO2 inside its folder
If you delete your GAMMA folder, you don't have GAMMA anymore
mmh, how about MO2?
If you installed MO2 "on the side" on your own, it's a different matter
- Updated to 1.5.2 yes
- Windows 10
- MO2 installed
- Anomaly and GAMMA are separated into their own folders in my C drive
- 358 active
- Haven't touched anything, no red Xs that I see
^this means that you don't need to install anything because it's already inside GAMMA
@jovial nest can't run the game?
@dense pumice it's easier if you tell me what you need to do 
the game refuses to boot up lol
be sure to bind the reload key 🙂
running MO2 as admin and I don't see any conflicts in there after a fresh install of Anomaly/G.A.M.M.A.
!crash @jovial nest @dense pumice
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
the crash is not in game
it doesn't even boot up lol
Send the crash log 
Yea I did but it's still wonky. Same with unjams on a few guns.
Please go in #🤖bot-commands and type !152
so in normal anomaly if you found a pda off of some1 it showed a message saying where a stash is and then marks it on the map, in this it doesnt seem to do that, does it just mark it on the map auto on pickup?
i wish i could
Go in that folder
Grab the PDA
Click on the message
Stash on your map if the message have coords
Yeah nothing about a real crash log
Are you sure GAMMA is linked to this Anomaly?
I have that folder copied, but the command suggests I did something wrong so I'll try again, thank you
It's 100% an error on your own, the crash log don't lie
i can't open anomaly, since it crashes before even starting up
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Try this
right
Should I be worried if the game starts but I still have a single flagged mod?
It could be a problem
yeah, didn't work
I assume flags are fixed the usual way? Re-Downloading in the Launcher followed by full reinstall?
Yes full install
Don't need to redownload the launcher
Re-download as in doing a full install, don't worry
Do I also need to enable PS Scripts and Start MO2 beforehand?
I'm inclined to but not sure if that messes with anything lol
Not needed
It's only needed the first time
so, uhh, falco anything else?
Honestly at this point I suggest to start over since Anomaly doesn't work
welp, i do still have the files lol
You're still stuck on step 0 so nothing of value is lost
soooooo, cheerio
What do you have exactly?
a problem
yes
What about GAMMA?
If you really need to delete everything because you're having problems: <#╭📖faq message>
You can follow this
right
If you don't understand something, ask
It should be easy enough to follow
yeah
be sure to disable the unjam and reload on the same key addon in MO2
Well cool, now after redownloading I have over 20 flags instead of 1 
Another hour we wait I guess
can i just skip this?
No I don't think you can
What's this, Anomaly or GAMMA?
@willow hawk yea did that too. It seems hot or miss a bit sometimes it works sometimes it doesn't. When it doesn't u jus kinda look at the gun like you're inspecting it.
gamma
Your zip is probably corrupted then
Delete the whole zip and download it again
right
so i still dont know why i dont have any of those animations other people have unless i have to turn them on first
It works now, thank you
Short answer because it's too long to explain
Those animations are disabled
Problems, much problems
Bugs that can kill your save
sadge but alright at least i know its not something i borked somehow lol
Yes it's not really worth for now
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 915
[error]Description : fatal error
[error]Arguments : Can't open section 'actors\stalker_bandit\stalker_bandit_berill_nohelm_1'. Please attach [*.ini_log] file to your bug report
right, new file, new me
If you want an easy working reload and unjam, don't use mags addon
for mags you need two keys, one to reload, the other to unjam
and based on how the gun reacts, you need to press one or the other.
I made modifications so unjamming is streamlined in gamma > you press R no matter what and your gun will shoot after the animation. Making it work for mags was too much work on my side, especially since I don't like mags so much (and also because what I tried didn't work, while it took 2x more time than making this work for the load order without mags addon)
having some trouble with this
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
thx
when i get into the actual game everything but the ui becomes blank
hey, falco. uhhh
i think something happened?
nothing is moving lmao
yeahhh, @brisk zinc, this is a new file
it's apparently the boomsticks and sharpsticks mod
is there a mod that allows stalkers to start with a mosin over the sks?
i wonder if it's a drive issue
Just installed GAMMA, after trying to start new game got this error, what should I do?
did u change any mods/ reshade settings. stuff?
is it ok to just uninstall everything and just restart? because i tried to fix a problem and it led to another problem
Disabled Jaku's shader
id try to make it in deafult state and see if that worked
#🤖bot-commands and type !152
!delete
If you really need to delete everything because you're having problems: <#╭📖faq message>
delete both folders and your installs fully and yeah it should be fine i did it to fix some texture issues and it worked :)
how do u update reshade? i downloaded the version but i dont know how to do it XD plz help
do not
it' not needed
!stutter
- Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on
Download G.A.M.M.A. dataand thenFull G.A.M.M.A. installation) - Bring your modlist back to default (type
!defaultin #🤖bot-commands) - Enable the "
Turn this on if you stutter" mod in your MO2 (you can found the mod under theG.A.M.M.A. Fixesseparator) - If you have a NVIDIA GPU, you can enable
Triple Bufferingin NVIDIA control panel - Open Anomaly Launcher via MO2 and tick
Prefetch sounds - If you have a beefy GPU, use
Anomaly (DX11)
sometimes it's just how Xray be
that's the game spawning stuff in
When i start the game this pops up
screenshot MO2
holy shit some new stuff apperd in discord i love u more man
Just want to ask if there's any thermal optics or scopes In the game?
Question, how big of a difference does the Prefetch Sound setting make?
what are the exact filepaths to GAMMA and Anomaly?
tf is this? i shut off my pc to go out and when i come back this happens.
it's an error pop up. It pops up when ever you get an error 
screenshot MO2
that was real informative
what are the extra mods you got on?
S:/GAMMA and S:/Anomaly
if you got a custom mod on, why the fuck are you in #🔨base-gamma-support ?
Go to #🔨modded-gamma-support
well didnt think it was a fucking problem considering its a reputation editor dumbass
i turned it off and still get the problem
says the one in the wrong channel 
read what i just put
man. Great tactic. Keep insulting the person that's helping you

well considering that mod probably affected your savefile
it doesnt matter if you turn it off
could have ill make a new one
if you already used it to make changes
it affected the load order
that to
any ❌ in mo2?
well its worked for 20+hrs of it so idk why it would just now decide to have a seizure
the game or a mod that was pre installed probably did a check against reputation failed created a runtime error which was further broken by the load order issue and is now corrupting your save file
ah okay thanks
that would be my guess but im only just starting my IT interships so dont take my word on it im not all that experianced with how it works
can you help me? it shows me 197 mods , i have extracted my installer to c/gama and my anomaly to c/anomaly
well good luck on that
pls help

you are most likely flagged as a bot on moddb.com
go to the website and have a look. If it's a big red screen you are flagged and you should see a timer for how long you are flagged.
Wait it out + and extra 30min.
If you aren't or the timer ran out do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
We strongly suggest you use mirror 127 or 128 when you do.
Also, if you got Windows Defender, add GAMMA and Anomaly folders to exceptions
im not
do the same steps above
I'm heading off to work.
grim can we post links here?
to what?
wait did i need to create three folders? like c:/gamma c:/anomaly and c:/new folder?
not this channel im just asking if we get embed perms
wanna know if i can post mp4s of errors i get or not
no
okay
you can, but usually we'll tell you what we need from ya
huhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh time to reinstall
are you able to help me figure out a issue i had earlier if i go fetch the screenshot?
i had to reinstall it a few times dont worry after the first time it seemed to be a lot faster :P
you got any idea what would be causing this issue grim?
i can equip the kar
but i cannot use it and it sticks to my hand during animations
Hey, uhh so
it also doesnt appear on my screen when its out and prevents me from using binos knifes or anything i would need to pull out that isnt a food/health item
I'm extracting the gamma file, but
The mod boomsticks and sharpsticks
It says here i have a data error
And also these files
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7b281b7aba5>::()::<lambda_3d4a39a1d3dc54b79c825d008d7a2fb1>::operator ()
[error]File : Xr_ini.cpp
[error]Line : 352
[error]Description : fatal error
[error]Arguments : Duplicate section 'wpn_vssk_barry_shots' wasn't marked as an override. Override section by prefixing it with '!' (![wpn_vssk_barry_shots]) or give it a unique name. Check this file and its DLTX mods: c:/anomaly/bin/..\gamedata\configs\system.ltx, mod file mod_system_zzbarryvsskreanim.ltx
hello guys, any ideas?
i just reinstalled the game and Gamma
Damn, same problems as mine?
I moved Anomaly folder into another drive and now i can run the game
KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving Anomaly:
- Move your
Anomalyfolder to the new location - Go to your
G.A.M.M.Afolder - Delete the
ModOrganizer.inifile. It should be below theModOrganizer.exeapplication
Moving G.A.M.M.A.:
- Open your
G.A.M.M.A.folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else - Move your
G.A.M.M.A.folder to the new location
When you have finished moving everything to the new location:
- Run the installer as admin
- Click on
1. Allow Powershell scripts - Click on
2. Launch MO2 - Select your
Anomalyfolder - Click on
Download G.A.M.M.A. dataand then click onFull G.A.M.M.A. installation
Hi, how can I disable or fix the issue when it shows mag icon of a current weapon in lower right corner, but also in the same place it shows bullet type, I would like to disable both of those icons, but keep the mag mods, thanks!
Does anybody know how to change the keybinds for a daddysave because it currently doesnt work for me because my f5 changes my lights in my keyboard and I cant find how to change this keybind.
is there anyway to get rid of this awful blur effect?
i cant figure out whats causing it other than its happening pretty regularly
It's probably DOF
!dof
It's the new DOF (Depth Of Field) effect. You can turn it off:
1) Open the game
2) Go in Mod Configuration Menu
3) Search SSS Settings
4) Disable whatever options you don't like and/or move sliders to the left
Shaders Cumulative Pack for GAMMA has to be enabled in MO2, otherwise the SSS settings won't be visible.
hello, i can't fast travel
usually i click the right mouse button and it shows the fast travel option on the map
now it does nothing
this happened after reinstalling the game
please help
Are you clicking on those green houses?
no one the white zones like bases
That's your problem
i know that's why i hate updating ..
if it ain't broken don't fix it lol
It's literally an error on your side though 
I dont get it, now it's 12 minutes ago but when I checked 5 minutes ago it was " 2 minutes". It's been almost 3 hours since I was able to last access that site and all I've done is check in the browser
That's the problem, "check in the browser", don't do that, just take a mental note of the time and wait, check back later
ok gonna reinstall
But why

Just click on those green houses
It's literally the only way
You can't teleport clicking on something else
(if you don't use debug mode)
pressed mouse 4 (mouse side button) and my screen zoomed it really bad
mouse 5 does not seem to undo said zoom how fix
ok, gonna try it
is there a noclip command? whenever i enter this area i get stuck behind a invisable wall
confirmed..it only works on the green houses icons..
now i want the name and address of the guy who came up with this idea, i want his head...
!noclip
You'll need to enable debug mode first (<#╭📖faq message>)
- Press Numpad 0
- Move around with WASD and go forward and backward with left click and right click
- Press Enter to "land"
how can i fix this, i used to fast travel everywhere i want.. i really need the old fast travel system
Click on the areas tab in your PDA to temporarily disable them and try again. Right click the green house icons
this same script crashes my game when i load a save 99.9% of the time. is this safe to just disable or something
the xr_meet.script thing
didn't work
Upload your whole crash log
Screenshot your pda
seriously guy i'm having a panic attack here, such feature is very important for me
Turn off the Areas tab temporarily and try again.
It draws the area circle over the icon for fast travel and interferes with you being able to select it
You cannot fast travel to all zones, ONLY to places with the green house icon
i understand, i did that, nothing changed, i also was able to FT to campfires and stashes now i cant
Well what did you change about your game
i know, i need to disable this feture
This is how fast travel works /shrug
!travel
Disable Limited Fast Travel and G.A.M.M.A. Fast Travel Limiter Rebalance.
Fun fact: with debug mode you can travel directly where a stash is, right click on it from your PDA. 
limiting fast travel makes the game more immersive and i like that, but where i am we get lots of electricity blackouts, and my pc can't full support my external Gcard... see?
That's a thing you can do with debug mode enabled, it's literally the only way (I know of)
For example, I'm right clicking on a campfire, I can teleport there if I want, because I have debug mode enabled
You can always disable the only campfire saves as well
debug menu wasn't enabled.....GOD I LOVE YOU SO MUCH!!!
I still suggest to disable those two mods, just to be sure
Thank you all guys, you always help epically
Have you tried turning off the white circles?
already done, thank you bro
i guess problem is no more
i got this error idk why
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ....a.l.k.e.r. anomaly\gamedata\scripts\itms_manager.script:527: attempt to index field 'actor' (a nil value)
stack trace:
Finally got it working, thanks for all the help
and my games crashes when i choose my loadout and i click start not immediatly but when loading
and i dont have any other mods installed
anyone can help ?
Can someone help me with this?
the dx 10 is working fine until I created an Stalker it get this message error.
All other dx is out except dx11 which my pc cant handle.
dx9 is getting error too when I started the game it crashed.
try DX8 ?
please ?
aight I try
Any error message? Did the log said anything?
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ....a.l.k.e.r. anomaly\gamedata\scripts\itms_manager.script:527: attempt to index field 'actor' (a nil value)
stack trace:
just this no errors
eyp its not working bruv
that dx8
Could anyone help me understand this? it happens every time I wake up after sleeping in Darkscape.
?
99% of all errors are fixed with a reinstall
so always try that first guys
make sure you followed installation instructions
sometimes moddb servers derp and don't install properly the first time
you don't need to reinstall everything
most of the files are downloaded
just run the installer again, click download data > full reinstall, and anything that was missed will be fixed
it takes a fraction of the time the second go around
I tried to reinstall, finally got it, but it still crashes at the same exact moment, that's why I came here.
like any error msg that's like "fatal error" or "nil value" means the game was looking for a file or code that doesn't exist.
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ....a.l.k.e.r. anomaly\gamedata\scripts\itms_manager.script:527: attempt to index field 'actor' (a nil value)
stack trace:
so is this fatal error ?
well
i guess i have to re install
@uneven tree do i do full gamma installation ? or only install gamma add ons ?
so make sure you followed all instructions carefully: downloaded and installed anomaly 1.51, then updated to 1.52 properly, then downloaded gamma into another folder, then ran the installer, clicked download gamma data then full install. if you did all that properly run the installer again so it can fix anything it missed
full install to be safe
i did
Ima try Installing again ig
same
Have my doubts that if It'll work though.
!mags
In order to properly enable Mags Redux:
- Enable
Mags Redux (Disable G.A.M.M.A. Unjam Reload)(the mod under "Optional") - Disable
G.A.M.M.A. Unjam Reload on the same key(yes it's a mod, no it isn't a keybind) - Enable
Ammo Check(this is a mod as well) - While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
- After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus) You can also enableMags Buyable at Tradersif you want, it's a mod already inside your mod list
KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file.
The only 100% safe way to do so is by loading a save where you DON'T have the mod enabled OR by starting a new game WITHOUT Mags Redux.
We also have this POSSIBLE workaround if you want to disable Mags Redux in the middle of your game:
<#🖇old-mods-posting message>
did you open the installer as admin
beacause i think mine is crashing cuz i dindt open it as admin
like I had the same issue as you all
so I reread the instalation instructions and followed them again
and it worked
I did I followed the instructions word for word even the single alphabet words.
did u add any mods ,
I did to the save files
it shows me 197 active mods
anyone else get crashes when they load a safe in dx10?
okay do them again, like I said moddb servers can sometimes derp and you won't download a file properly. full install will check every file you downloaded to make sure it was downloaded properly and reinstall it if it doesn't. the check takes like 15 mins tops.
I went through a process where the game wouldn't start, then I had to reinstall the mods, but now none of the mods are enabled, so is there an option to quick enable every mod and then I can disable the ones I don't need? NEVERMIND. i figured it out.
!scrambled
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
Still getting this after 3rd install
!mutants do the steps below
1. In MO2, find your "Night Mutants- xcvb" mod and right click it. It should show a list of things.
2. Click "Visit on www.moddb.com"
3. On the mod's page in moddb, click "Download Now", to download an updated version of Night Mutants.
4. In your MO2 again, go to the very top-left of your window. Click "File", then "Install Mod"
5. Find your downloaded version of "Night Mutants" and click it to install. Rename the mod to "Night Mutants Overwrite", or something like that.
6. "Night Mutants Overwrite" should now be a mod in your "GAMMA Disabled" section. Find it, and click the empty box on the left of its name to enable it.
Back to what I was talking about earlier, I got all the mods back but they were all disabled, so I enabled all and I was trying to sort out which ones I needed to have off to have 358 mods, but I'm taking a gamble so is there a list that shows which are supposed to be enabled and disabled?
the modlist is at #❗welcome .
Got it, thanks.
So I went to download the addon and got this massage: The webpage at https://web.archive.org/web/20230106151339/https://www.moddb.com/downloads/mirror/234461/122/f4c40eaa64c6ad07b7f828b1b350b343 might be temporarily down or it may have moved permanently to a new web address.*
although this could be because the are under the impression that I am a bot.
Then you will need to wait the timer + 30 mins
since the file isnt large here
Hi! Is there any way to get rid of this square sun thing on foggy weather without disabling sun shadow?
use #🤖bot-commands pls
Seems to work now, thanks for the help.
Hello, i install stalker and gamma and when I launch the game and create a new save, the game crash
Can you help me please?
do you get any error message
Yes
and it is...?
most likely monkey patches
taking bets now lmao
Wait I send you a pic
just put it in here
when i try to launch the game as DX11, it simply doesn't let me. This pops up for about 12 seconds, disappears and then i'm back to MO2. No error pops up no nothing?
!152 update anomaly
You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
!k98 do the steps below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Hi Guys I keep crashing after a while being ingame, other saves have the same issue.
@keen cedar @narrow sparrowThank you thats finally work
you have a companion with you?
yes 2
well one of them is the potential crash reason.
You will need to delete him via the debug menu so enable it first
!debug
How to enable debug mode: #╭📖faq message
Hi gents i tried to install gamma, but it stop with the second mod.
!solving
If your installer is stuck and you can read "Instruction solving..." at the bottom, follow this:
- Close the installer
- Go to your
C:/Windows/System32and look for a file calledRobocopy.exe - Copy this file and paste it in
GAMMA RC3/.Grok's Modpack Installer/resources. - Remove
Robocopy_10.exefrom this folder and rename your recently pastedRobocopy.exetoRobocopy_10.exe - Relaunch the installer with admin rights, it should be fixed.
thx 🙂
if i kill someone somewhere were no one else could see it happen will my rep go down still?
I have only 330 mods after a full GAMMA installation and ofc I crash on startup. Is there anyway to fix that without fully installing GAMMA again?
please help this took me way to long to set up 🙏
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. getting this error on fourth install, 358 active mods
!k98 follow instructions below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
could you help me?
Thnnx That did the trick!
!full you will have to run full gamma installation again until it downloads all the mods.
Disable your anti virus temporarily
Go to moddb.com to check if you're flagged as a bot before you proceed with full instalation again.
Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.
hey, I'm getting this error after update
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click on "Install only G.A.M.M.A add-ons"
alright, thank you very much!
hi im trying to install this mod "GAMMA MASSIVE TEXT OVERHAUL PROJECT (GMTOP) V1.1.0" and it says "Just install and drop at the bottom of your G.A.M.M.A. mod manager list.
E-Z P-Z." I'm completely new to modding so I don't know where to actually find this mod manager list. Is it talking about the mod organizer? Because if so, I've already tried dragging it into there.
We have !vssk for that
thanks!
I wasn't informed 
Now you are 
Thank you.
Anyway, back to the warehouse
disable Roadside Lensflare addon in MO2
but it shouldn't generate this issue though
I moved the world rendering distance slider from zero to half and it seems to have disappeared in sun rays (i'm green at it). In the future I will see how much the slider needs to be moved with sun rays on and off
hi y all i need some help with a quest
hey guys .. hope u have a good day ... aam i got a problem with this error here... i reinstall the game and everything but i got this error the second time .... need a bit help pls 😄 thanks
!k98 follow instructions below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
i love u @tender forge thank u verry much have a good day mate
with Sun rays off there is no problem, but with sun rays on "world rendering distance" at the third point on the shifter makes the square in the sun disappear
Good evening guys, need some help here. when i start gamma from MO it launch anomaly only, what to do??
!k98 do the steps below
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
hello i just installed stalker gamma, i booted it up and started a new game when the loading screen was about done it just crashed with no error message. Can i get some help?
I have same problem on my ISG run, did you found any solution?
mh my game keep crashing in the mortal sin quest yantar lab
!crash send the log
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
here it is
!k98 do the steps below







