#🔨base-gamma-support
1 messages · Page 225 of 1
hello friends
how do i install screen space shaders on top of the mods gamma has to offer?
SSS Got added in the last update
oh
what is the easiest way to update my gamma modpack?
the install was a pain in the ass
also, non default modlist questions/problems go to #🔨modded-gamma-support
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
ok
thank you, very much
didnt know the installer can also update
Hi, someone knows how to enable the target detection function of the EOTS 62 scope ?
it only works on a specific gun
argh which one ?
Hello, has anyone ever tried to migrate an install from one drive to another? I was considering moving my install to my SSD but not sure if I should fresh install.
Its called Experiment No62 or something similar
!move
KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
1) Open your GAMMA folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
2) Move your GAMMA folder to the new location
3) Run the installer as admin, click on Download G.A.M.M.A. data and then on Full G.A.M.M.A. installation.
Moving Anomaly:
1) Move the Anomaly folder to the new location
2) Go to your GAMMA folder
3) Delete ModOrganizer.ini file. It should be below the ModOrganizer.exe application
4) Launch Mod Organizer (click on the ModOrganizer.exe file in the same GAMMA folder)
5) Press OK, then Browse, then select your Anomaly folder. Done.
TY!
do you need the GAMMA RC3 folder on your computer to update?
Ok thank you, and i have another question, what's the green laser aim module installed on my gun ? Can i turn it on ?
hey ,did you know how too switch aim on some Rifle ?
Hold L with the gun in your hands
You mean the secondary sights?
haha you're a genius
nice
it works
i dont think it says anything abt that
that
To update you run the installer as admin
Download the gamma data through it
And run a full install
Press V(by default)
ok ty, was curious if i needed to spend 30min re downloading that file
yes I change that
does anyone know how to solve the issue with an missing model file?
Either 

I even tried to turn off my AMP/DAC which causes problems on some games (like Orc Must Die 2, Dying Light or Snowrunner)
game keeps crashing when i go to agroprom
Ok, so I have a little problem, my game take a lot to load, as well when I make a save or a quicksave it takes like a full minute to save, I'm sure that's not a performance issue, as my game runs smoothly, except some random freezes and crashes. As of writing this I've realized that my installer version is the RC 3.2, not the newest 3.8, could that be my problem?
What model file?
That happens when you have stashes with too many items inside them
Ok I try every key I can't where is that option
?_?
The catch is that my save file is a new one, this behavior in my game occurred right after I installed the newest updates
Is that ????
Yup that's the one
Thats not a file from the vanilla modlist. You run any extra mods?
not really got the 357 mods active + the thing u tick if game stutters
Consistent CTDs while inside Lab X-18 in Yantar with no error messages afterwards, not sure what's wrong, but something definitely is
hey... quick question...
how to I get my run button back 🫠
Hello, I'm looking for some tech support. My game keeps crashing when I try to change map or start a new game. Is this the right channel?
!crash Yes it is the right channel but follow these instructions to get help
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
place your mouse around there and drag
try reinstalling BaS
Does someone know why the radio won't play music? (Normal radio not the custom one)
ohh... u can completely minimized it... thank you
!bas following the steps here
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
getting this error when loading my save
type this in the debug console release_id 25678
Disable Gamma loading screens - Cs Eden
in mo2
Guys, for some reason I don't see Grey Staches on the map anymore. Only Green ones. How to fix this?
I don't remember when that happened but still...
maybe because you didn't discover their coords ?
I played multiple hours with both Grey and Green ones.
But now I only have some Greens on the map. No Greys at all.
how exactly do I type that, and how do I get to where that needs typed?
For hours.
i can't find that mod
Press F7 to open the debug menu and a console will appear on the left
Anyone
help i turned off the fast travel limiter and rebalance for it and now my hud wont work, the zoom feature is stuck, and i cant fast travel
265 is
The game works but it's distractinf
So you're saying I need to uninstall and do a full reinstall?
Only anomaly not gamma
Anyone?
send a screenshot of Mo2
Did you disable the loading screens mod?
No idea, I reinstalled Anomaly after Dest string less than needed crash
I say again, send a screenshot of Mo2
i did and the game is fine now, thank you!
why do only smgs have magazines? and why do they disappear every time i reload the game?
If you do a refresh install could that possibly help your current save? Or does the save retain data that will cause it to be broken?
Find this its number 276 in the priority numbers
Hey all I get this error when launching gamma after the update. Im not sure how to fix it. If anyone who has a second could help I know you are probably busy.
I heard thunder and now my screen is stuck like this...help?
expand the name column that Mo2 layout makes me mad
That made one of my duty companions cease to exist, now what?
sry
check if you still crash
You have missing mods. Those Red Xs mean a mod didnt download
!full run a full install
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
I have tried to enter the game as I usually do but was met with this. As far as I am aware, my anti-virus has not been the cause of the problem and the files all seem intact. Thank you.
close Mo2
Delete Modorganiser.ini
Open Mo2 and recreate the instance
hey i get this erro when i try to start a game,any help?
Disable Gamma loading screens - Cs Eden
i just hit full install and inadvertently skipped download gamma data first. will this fk it up?
most likely. Close the installer and do it again
were i can find that?
They are literally enabled
ever since the update the pda holstering and take out is much faster, kinda intrusive
Disable the Cs eden mod those loading screens only work in Dx11
you spotted that I am on DX8 huh? Cool
ok did it, will check tomorrow
thanks fixed my problem
Seems like it’s running fine now, what was the issue that was solved by deleting the companion?
Getting Frequent Out of memory crashes before and after a clean reinstall.
do you have #📍577-mods-in-mo2 ?
do you see any ❌ in MO2 under flags?
From what i understand from the log the game tried to spawn the items he already has in his inv again and because they have the same id it gives up and crashes
Ah, sad, he was a good companion, had him for a while
Alright reporting back after a full Anomaly and GAMMA reinstall and it's still happening, this one NPC crashes the game every time he dies. At this point I might just cheat and delete him because I dunno if this is something I'll be able to fix
yeeting him out of existence might be the only solution.
At least for now until a patch comes along lmao, I'll go do that
Yes and no. THe only thing i have changed is Gamma MCM values to keep my settings accross reinstalls.
System has 32 gigs of memory.
Try this:
- Go to
\Anomaly\appdataand openuser.ltxwith a text editor.- Search for
snd_cache_sizeandsnd_targetsthen reduce their value from256to128- Launch the game and open the settings.
- Click
VisualthenAdvanced.- Slightly reduce
Texture detailandObject detail.
found them
I have waited more than 7 days with strelok to engage the monolith and he wont let me start the mission
finished full install tried to load game on two different saves same result Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...2/bin/..\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
stack trace:
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
how can i use the debug menu
!debug
How to enable debug mode: #╭📖faq message
thx
Will try that thanks. Been having several other issues lately since my first reinstall a few days ago. Buttons/triggers not working Randomly not working. PDA being blurry and Missions disappearing from my log and getting stuck with the mission item in my inventory.
Hold on, do you play other modpacks than GAMMA, or do you maybe mod other games in general using MO2?
!BUSYHANDS
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
#🤖bot-commands
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
hey, does anyone know how to get sli working in anomaly? i'm trying to test some older cards. gtx 670's. it looks like sli works in the menu, but not in game
No other mod packs, I might have another game using Mo2 buried somewhere in my system but I cant say for sure. I don't normally use it so it isn't my go to mod manager.
You are advised to uninstall any global installations of MO2.
Using only portable versions ensures no conflicts
Ill look into it, thanks
Game crashes upon finishing character creation
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
anomaly folder now looks like this
What the fuck are you even doing?
dragged and dropped from zip
Here is an example of how it should look
Will I have to delete everything and start over?
do you have #📍577-mods-in-mo2 ?
do you see any ❌ in MO2 under flags?
i bought a LAM kit for my pistol I can only assume that its some kind of laser for it but i cant for the life of me figure out how to turn it on
assume it was fine before following instructions to download 1.5.2 update again
cheers
!dest
You'll need to delete your Anomaly folder.
- Open your Anomaly folder, if you have any save files you want to keep, take them from this folder:
Anomaly\appdata\savedgames - Delete your Anomaly folder
- Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send
!152in #🤖bot-commands) - Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#📢announcements message>)
- Click on
Download GAMMA dataand then click onFull GAMMA installation
Yes I have 357 and no Flags
What GPU are you using?
MSI GTX 1080TI
!dependencies make sure stuff is up to date/repaired (ignore Powershell)
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
is this the right channel to ask hardware related questions?
Also tell me where you installed the game, both Anomaly and GAMMA
maybe, shoot
I installed the files on My C drive both Anomaly and Gamma
SLI on my gtx 670's works in the main menu, but not in game. any idea what's up?
exact path?
SLI is some old stuff, no idea
hey i had perf issues beforehand and reinstalled using the guide and the gamma just crashes on startup
i know. i'm giving my old pc to my brother and was trying to set gamma up for him
post the log
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
Right, well do the dependencies thing, if that does not work then we have a few more things we can try
its hard to find info on it because nobody uses it anymore
I found out the button for the double scope keybind
it's the one for the under barrell granade launcher
maybe you can't have 2 scopes and a grenade launcher both on your rifle?
anyway, that's for everyone if u need it too
You can, it just takes another tap of the keybind
You never know when you might need one
gamma was running fine until today now i crash on save reload this is the error from the crash log
not compatible with 'new_name.script'.
Registering
Loading ini: misc\smart_profiles.ltx
end setup
- phase time: 2364 ms
- phase cmem: 1639234 K
- phase time: 161 ms
- phase cmem: 1638982 K
loading mdata - Loading spawn registry...
- 18677 spawn points are successfully loaded
- Loading objects...
- 30913 objects are successfully loaded
- Game stalker - sleep is successfully loaded from file 'e:/stalker anomaly/bin/..\appdata\savedgames\stalker - sleep.scop' (1.110s)
- phase time: 1109 ms
- phase cmem: 1711913 K
- phase time: 169 ms
- phase cmem: 1711913 K
- phase time: 170 ms
- phase cmem: 1711911 K
- [x-ray]: Full Memory Stats
- [win32]: free[137422993148 K], reserved[6031224 K], committed[9929036 K]
- [ D3D ]: textures[1334619 K]
- [x-ray]: process heap[1711911 K]
- [x-ray]: economy: strings[166379 K], smem[115712 K]
stack trace:
[error][ 87] : The parameter is incorrect.
at address 0x0000000140104A49
anyone have any idea what causes it?
no not yet, just updated it. ok I'll try it out
that's the nuclear option and the last thing to suggest...
drag and drop the entire log here
sure thing one sec
lmao yeah i'm pretty nuclear
Could anyone assists me
my game is crazy dark
Ok I downloaded them and have the Frame works on. It does not seem to have worked. Still the same error
screen cap MO2 for me
take a screen shot of post it here
did you disable any mods?
no, none that I can think of, literally just updated it
Try going to \Anomaly\bin and setting the DX version you use to always run as admin, then run MO2 as admin and try again
go to moddb.com and take a screen shot of what you see
post it here
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
doing it as we speak, this shouldn't take as long as my first time installing it right?
@sharp bough
faster, because it's not gonna redownload everything just check the files
do you have aggressor reshade enabled?
should it be?>
no, not really unless you prefer it. it makes the game darker is all so was just checking.
i have a genuine problem
type cfg_load grading_warm in the console
Yo where do I go to find my crashlogs?
stalker anomaly/appdata
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
my shader mods refuse to work, i reinstalled them from the ground up, enabled them , yet i only have the default ones in the home page
I'm trying to load into my current game, but I keep getting this error:
-----loading d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx
!!!DLTX ERROR Attemped to override section 'dolg_voin', which doesn't exist. Ensure that a base section with the same name is loaded first. Check this file and its DLTX mods: d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx, mod file mod_system_balanced_armor_rad_res_gamma.ltx
!!!DLTX ERROR Attemped to override section 'dolg_scientific_red', which doesn't exist. Ensure that a base section with the same name is loaded first. Check this file and its DLTX mods: d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx, mod file mod_system_balanced_armor_rad_res_gamma.ltx
-----loading d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx
!!!DLTX ERROR Attemped to override section 'dolg_voin', which doesn't exist. Ensure that a base section with the same name is loaded first. Check this file and its DLTX mods: d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx, mod file mod_system_balanced_armor_rad_res_gamma.ltx
!!!DLTX ERROR Attemped to override section 'dolg_scientific_red', which doesn't exist. Ensure that a base section with the same name is loaded first. Check this file and its DLTX mods: d:/stalker anomaly/anomaly-1.5.1.2\gamedata\configs\system.ltx, mod file mod_system_balanced_armor_rad_res_gamma.ltx
what was that supposed to do? I typed it into the console and nothing happened
drag and drop the entire log file here
was hoping it might work 
😦
get rid of your newby tag while I think #⏩start-confirm
Hi, I have just started dabbling with the repair mechanics. But, it appears that sewing thread is bugged!? I have a suit at 72% and when i attempt to use the thread the UI shows the gas cooker icon. Is this right?
What mod does the DOF and can i turn it off??
!dof
It's the new DOF (Depth Of Field) effect. You can turn it off:
- Open the game
- Go in
Mod Configuration Menu - Search
SSS Settings - Disable whatever options you don't like and/or move sliders to the left
I did this and it is still doing DOF when set to zero
Reloading game to see if it continues
im having this error
I saw your log, but as you can see, you're not the only one here with issues
Ok set it to run as admin and ran the launcher as admin still the same error. I tested and can run base Anomaly fine.
sorry. i just read bot message and thought it was ignored
- Go in GAMMA RC3.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
- Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
- Paste this file in Anomaly\appdata
Try this. This should revert your settings to default, but it might fix the issue. You can back up your settings by making a copy of your user.ltx that is in Anomaly\appdata
!crash try sending the full log
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
no luck sadly
So about this
you got empty stack trace. I'll deal with you last
Got it
@junior moon
looking into you
running DX10 or DX11 ?
Dx11
!amd fuck it, try the dxvk part of this:
If you have issues with AMD GPUs try installing the dlls of the x64 folder of the following .tar.gz to Anomaly/bin folder: https://github.com/doitsujin/dxvk/releases
If you still have issues, refer to this guide: #╭📖faq message
can anyone tell me how do disable the Body and Health system is really hard buggy or i am to dumb
!bhs
In order to safely disable BHS, you'll need to disable Body Health System and G.A.M.M.A. Minimalist HUD in your mod list.
seems to have been related to the save not the modlist. the save I was loading from is right before a emission so that might have something to do with it, but aside from that idk. The sleep auto-save i have seems to work fine
!bhs
In order to safely disable BHS, you'll need to disable Body Health System and G.A.M.M.A. Minimalist HUD in your mod list.
kekfacepalm hahaha
go to MO2 and reinstall 40- Food Drugs and Drinks Animations FDDA - Feel_Fried by right clicking on it and choosing Reinstall
as for you... Me and you get to play 20 questions!
First few are not questions tho. Post a screen cap of MO2
did you disable/enable any mods?
Hello, I updated to the anniversery edition today, and now the game CTD when i move within spawn range of my main stash.
I enabled one that was supposed to disable stuttering (the "enable this if you stutter" one) and I just updated the game because I thought thats why it wasn't working correctly
cool. That was easy. you got missing mods
go to moddb.com and post a screenshot of what you see there
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
I had all 348 mods before I updated
you need #📍577-mods-in-mo2
My ground is green like this and it looks really weird, can I change it to be dirt colored
ah thats the issue
Idk why it looks taht way
you are missing mod, so it's only a matter of time until you crash again
Why are literally all my stalker kills not counting towards my rank / stats-
drag and drop the entire crash log here
I don't know. Get rid of your newby tag #⏩start-confirm
nvm, I was wrong. it was NPC's cannot see through folliage messing up my game. Now I can reload saves, but only once. then I crash after I try to reload it a second time. same error msg @sharp bough health and stuff also seem to bug out after the first reload.
Hello world. I just want to notice you that you can't transmute Full Empty artifact, the game crash. My crashlog say this :
FATAL ERROR
[error]Expression : visual
[error]Function : attachable_hud_item::load
[error]File : player_hud.cpp
[error]Line : 404
[error]Description : could not create model dynamics\artefacts\artefact_electra_blue_hud
that's busyhands bug
Does anyone know why this is happening
it looks so off
!modlist send that
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
@sharp boughnow im having new error
Figured it out, PDA 3.0 is bugged. Literally swapped to a new PDA and suddenly stalker kills count again...
Is there any way to reset the mo2 mods to default install?
!default
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
@junior moonI found it! Just typing it out here for anyone interested. downloaded nvidia profile inspector. created a new profile and called it stalker anomaly. set the SLI options the same as the profile for stalker: call of pripyat. selected "add program to current profile". selected anomaly dx11avx.exe. saved and started the game. it all works now.
Thanks!
Im getting this error, anyone know how to fix? [2022-12-04 22:21:32.493 E] The selected profile 'Default' does not exist. The profile 'G.A.M.M.A' will be used instead
make sure GAMMA doesn't use integrated GPU
@sharp boughhow do i do that?
what is your actual GPU?
GTX 1650 TI
did you do the full install again?
yes
nVidia right?
yup
hey guys, can someone tell me why there are no shaders showing even though i have all the shaders enabled in MO
and im using DX11-AVX
it's in your nVidia control panel. Google it I got my hands full right now
get rid of your newby tag #⏩start-confirm
And ask in #🔨modded-gamma-support
screen cap MO2 again for me
and your game still crashes?
yes, but only after reloading a save twice
the one with the fucked up HP hud?
yes, after I reload the save, the HP hud is fucked. Then if I reload the save again it crashes
load an earlier save where that bug isn't present
sure thing will try one sec
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\weapons\wpn_raptr\wpn_raptr.ogf'.
when did you last update?
yesterday updated gamma addons
did you use the Full Install button?
no
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
alright
seems to work fine now. Thanks. The saves that were affected were saves that were relatively close to a emission if that helps any
you had a busyhands bugs, it's a known issue with few fixes
Hello, I just finished the new Full Update. I didn't have a backup of my mod config. I wanted to have the backpack animation from FDDA and the option is not in MCM. Have I done something wrong?
Ok I tried that and updated my drivers. It still did not work. It also made my second monitor undetectable to my GPU. I think my whole PC is fucked now lol. I suck with computers.
You were only supposed to install the dxvk .dll files......
nope, that's disabled for a reason. It can break saves
!busyhands
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
Rogue is trapped underground in the War Within quest, had to use debug to go downstairs but now I have to escort him and he is stuck there, making it impossible to progress in the operation afterglow questline
Oh good god, missed that, thank you! you guys do amazing work!

Don't have any good fix for you. Try reloading an earlyer save where he's hopefully not bugged
I don't have as full of a grasp on computers as I'd like and I've run into something that's confusing me and I'd appreciate any input. After updating the lastupdate, the game uses way more of my CPU than before. Before the update, about 50% - 60% of my cpu was be used while memory was at 100% ( which is nice, i like my ram being used). After the update, my cpu is topping out at 100% while only 70% of memory is being used. Has anyone else noticed an increase in CPU usage, post update. Or has anyone else seen this issue/bug (maybe)?
try running with AVX on or off depending on what you have now
are there known causes?
I've always used DVX11-AVX, but I'll try it and see if there's a difference.
!avx
Actual explanation at the bottom but simply put:
Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.
Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.
saiga 12s low reload bug
I havent got around to switching avx off yet because I totally forgot about something that could be the culprit. I started noticing the extra CPU usage today but i've also started to get failed MO2 launches today as well. (The pic is the notice or error message). I keep retrying and eventually it launches. Of course I don't know if this is the cause cuz im ignorant of anything to do with computers but this is my guess.
https://www.reddit.com/r/skyrimmods/comments/cmwngv/moving_from_instance_to_portable_mo2/
I think this might help with that issue. so make sure you have backups of the files to restore if it doesn't work
I appreciate your help and effort
going a bit insane here ,i'm trying to go to the next level but everytime loading is almost done it transitions to loading the previous level i came from
disable "smooth level transitions" in MO2 or whatever it's called
Hey everyone, hope your day is going well..
I finally managed to install GAMMA without issues, been playing around and it's really amazing. Thank you so much for the effort.
I'm still pretty early on my playthrough, but I came across an SKS with no texture I believe, it's just gray, lol. Does this have anything to do with the fact that I'm playing on DX8 to enjoy an acceptable above 60FPS experience? picture is attached
so i had the modpack working and everything was fine i had to delete it for room now when i download it only 230 mods are active and it crashes on startup as well
which one
areas transitions without confirmation?
Yes
I did that and solved the issued, thank god I had an earlier save, or the run would be busted. Thank you!
the issue*
why cant I put this sight on my ak
did nothing and somehow still doesn't ask me for confirmation to go to another area lol
you disabled it? restarted the game?
I just updated my game and there's this new depth of field effect and I cant find a way to turn it off does anyone know how?
it's called DOF in settings
!dof
It's the new DOF (Depth Of Field) effect. You can turn it off:
- Open the game
- Go in
Mod Configuration Menu - Search
SSS Settings - Disable whatever options you don't like and/or move sliders to the left
thank you
what's the addon or the option to disable when every new weapon equipped the character sees it?
@sharp bough Alright I downloaded everything what now
alr thanks
Does anyone know what's causing this issue? Thanks in advance and sorry to bother..
was?
Using Mags Redux?
in this save? yes
Did you update the game and then forgot to re-enable the Mags Redux mods?
!mags
In order to properly enable Mags Redux:
- Enable
Mags Redux (Disable G.A.M.M.A. Unjam Reload)(the mod under "Optional") - Disable
G.A.M.M.A. Unjam Reload on the same key(yes it's a mod, no it isn't a keybind) - Enable
Ammo Check(this is a mod as well) - While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
- After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus) You can also enableMags Buyable at Tradersif you want, it's a mod already inside your mod list
KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file.
The only 100% safe way to do so is by loading a save where you DON'T have the mod enabled OR by starting a new game WITHOUT Mags Redux.
We also have this POSSIBLE workaround if you want to disable Mags Redux in the middle of your game:
<#🖇old-mods-posting message>
Can't
!shader
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
is there any command to get a tutorial how to add a mod ? would like to use the HD stalker outfit mods i don't think it was on the modpack list on MO2 !
Go to #🔨modded-gamma-support or #1035807043933720576 or #╙🖇mods-making-discussion or anywhere else.
Oh wait you can't, remove your newcomer role first, ye who does not read. #❗❗newbies-read-this
can't find shaders_cache
I'm having issues sometimes after fast-travelling, my health hud gets bugged and when I zoom in it doesn't go back. Anyway to stop this from happening?
!hud
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
!busyfix after you do the above
A possible fix for busyhands if you have the "Turn this on if you stutter" mod enabled: reduce the auto_switch_distance_start in small increments of a few hundred at a time in \GAMMA\mods\Turn this on if you stutter\gamedata\configs alife.ltx.
Start with like 300 or something, then every time you get busyhands randomly, reduce it by 200 more.
If the fix needs to be resistant to changes made by the installer make sure to also modify the alife.ltx file in \GAMMA\.Grok's Modpack Installer\G.A.M.M.A\modpack_addons\Turn this on if you stutter\gamedata\configs
Yup, I turned it on today
do the !busyfix above then
Gotcha, thanks guys
These are the only folders there
do you have #📍577-mods-in-mo2 ?
do you see any ❌ in MO2 under flags?
Yes and no
welp, no idea what the issue is then.
maybe just try running another full install like this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
Welp, tried out DX10+ and the issue with the texture is still there. Don't know what could be causing it. Any tips?
Where can I find this?
in MO2
I looked through the list of mods and couldn't find it @prime fulcrum maybe I'm just blind though, can you pinpoint where it is exactly please?
use the filter search menu in the bottom middle part of MO2
Oh I didn't know we had that.... thank you!@
So basically, rename the mod and then do a full install, easy as that right?
hello. i would like to be able to play the game, anyone can help?
Hey Sean im back thanks for your help. I fixed my GPU issue. Will a full re-install work? It was working fine before the update.
Brother you seem to be playing the game though
tell that to the infinite loading
I haven't managed to reach the next level that's 2 steps ahead of me
in like an hour
Have you tried debug fast travel?
not really but what's the difference.
it's gonna load the next level and then go back to this one
Maybe its just the entrance of the level, that's why the debug might help you
i'm trying
is there any way to go from 333 mods installed to the 357
So.. no one has a clue? I'll just have to avoid using the SKS then, lol
It seems like I can no longer edit the ai_die_in_anomaly or ai_aim_predict_time values anymore
They just automatically reset to the defaults
I'm having an issue trying to launch the game, every time I launch anomaly and go into the game it doesn't open and the mod organizer unlocks and lets me try to run it again to no avail
didn't work, now it sent me back to the entrace of the sarcophagus
what a killjoy... buggy modpack
Rip in pasta
I'm having some trouble getting through the Miracle Machine on my present save, crashing out seemingly at random actions taken while scaling the walkways to flip the switches off.
The last logs I pulled mentioned that the process had "not enough memory resources available to process this command", and searching back with similar users with that issue, the answer was to do what's described in !full, which I did. Now, though, my logs aren't... really telling me anything I can pick out as the root cause of the problem (Or I've just gone blind from reading through them so many times.) Could I have some help ID'ing the trouble, please?
this is not a support channel, #🔨base-gamma-support
and you too, #🔨base-gamma-support
oh wait I'm trippin
lol u good
Oop..! Are we good, then?
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
Ah, I've done this once already-- is this just a case of "repeat until it works", then?
read the bot message
the upper part of it
I have, I have. None of those were concerns.
I shall run it again and see what happens.
Goodluck 
After the new update i can no longer lunch MO2, any ideas?
So, is this the right place when the game keeps suddenly crashing hard?
screenshot your anomaly/bin folder
What was the fix for this?
I had something similar. Updated my addons and full installed GAMMA. Dont need to delete anything or back up. My saves were still good, just some settings reset to default.
Only issue i'm seeing after updating is I no longer have the option to attach/detach scopes for some reason
Got it to work after loading a save, thanks for the help tho :)
!hud
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
Hello. I have been trying to install the GAMMA pack the way it's instructed for the past couple of days now. I've tried 4 times. Each time the MO2 shows less and less mods. The game just does not install properly. I followed the instructions here on discord and the videos on youtube. Nothing works. Nothing gets me the 334 or the 357 mods. Last time I tried the software only installed 230 mods. I am not sure if this has to do with ModDB flagging me, or something else, but nothing I have tried for the past couple of days has worked at all. I'm at a loss. Anyone has any suggestions, other than scraping my shins with sand papar while trying to step on legos with bare feet?
Well, real quick, are you flagged on ModDB? If you go to https://moddb.com do you get a big red screen?
second - are you on installer version 3.8? That is the one you should be on
Ah! Yes I am flagged. does the flag go away after x amount of time or am I banned from ModDB?
Yeah, the message should say how long to wait, usually we'd recommend waiting that long + 30m to be sure. Or you can use a VPN
Then you can try the full install again - I'd recommend you pick mirror 127 or 128 when you do so, through the installer
Okay but this does not explain why the first time I did it, it did not instal correctly. And yes I was on installer 3.8
I should also mention, I did install Gamma once (few months ago) and it worked flawlessly. I even updated it and I had 357 something mods. It worked great. Then my SSD failed, so I had to reinstall everything. I could not get it to work since.
Ok, I'll re-reference my previous ticket here. After following the instructions provided by the !full command a second time, there has seemingly been no obvious change. And, of course, no fix.
The crashlogs, on inspection and comparison, appear to be different, but not in a way I can make sense of nor identify a culprit.
what does it mean when the weapon upgrades say "trader requires more tools" or smth like that
You need to do the missions for them which are bring basic, advanced and expert tools
Oh okay that makes sense, thank you!
!missingmods the installer occasionally craps out for large files, that plus the part where moddb is not exactly set up for people to rapidly download ~300 files from it
Follow this guide if you're missing one or more mods: #╭📖faq message
Quick explanation about WHY you're missing mods/files:
Moddb isn't really suited for the installer, it's not that much ordinary to download 300+ mods casually every other day, so you can lose some files in the process, when you download them.
MO2 can't obviously know if you have everything or not. This is because, if the file structure of the mod is "okay", the mod is "okay".
Anomaly, on the other hand, knows right away that something is wrong/is missing from a specific mod, because it has to look for certain files in certain mods. And if those files are not there, the game crashes.
do i need to unpack 1.5.1 before putting 1.5.2 in the folder
okay thank you
so i have winRAR and i just downloaded 7Zip and I'm trying to download the mirror files and it keeps defaulting to downloading them to winRAR do i need to uninstall it to get them to go to 7Zip or can i set priority for downloads?
Right click and see if it lets you extract with 7zip
tried that and it doesnt let me
I tried to download the Gamma addons downloads and its not there anymore. can i install Gamma with only the Gamma RC3??
That's weird, I'd uninstall winrar just to be sure
do i have to do anything after unpacking 1.5.2?
also since i unpacked the game with winrar will they work altogether or should i just nuke the file and create another unpack with 7zip altogether
Do it with 7zip just in case
alrighty will try ty
How do I start a thread here?
why
no I mean its not in the links in the discord anymore i can only find RC3
why are you trying to download addons
I've been trying to get help on this channel for a few days but I've never gotten a response so I figured a thread would get more attention than in a chat
read #old-how-to-install...
#1026866080347603065 is a thing
its in the installation guide
it's not
hi all
just want to
get the finished install (portable)
links seem to have many resources
ok man thanks
Download just one RC3 file nothing else
I seemed to have screwed the process of updating the game, and now half the mods only have meta.ini files in them
wha do
screenshot your MO2
Yeah the X's are broken mods
go to moddb.com and screenshot
Wait until you're not marked as a bot anymore and an extra 10-20 minutes, then try installing it again
aight
If you have a VPN change location and just install again
My single companion is apparently 500m away, and nowhere to be found, is there a way to summon them back to me? Going to a different area doesn’t seem to help either.
you'll have to enable it, then the key for teleporting them to you by default is J - though I believe it only works if you are within about 300m of them
If their health isn't white you should be able to teleport them
His health was black for a while, then it switched back to green
has anyone's time of day not changing? Like the same weather of clear_day2 or whatever but its like 20:00
Bro died and came back to live
Try using the mod to see if it works for you @languid furnace
Yep, looking in the mod list for the one mentioned
Use the filter here to look for it
Will using this one mean I have to use #🔨modded-gamma-support now, or is it fine?
I just wanted to pop-in back to say - something went so weird that, every time I use esc twice to fix weird inventory bug, it works! You fixed the game with just your powerful words :D
Glad it did work :)
I'm still getting this double sight issue. I tried !dof and !k98 and neither worked. Toggling the box in the SSS menu kinda fixes it, but instead of solving the problem it just removes the circular aperture and I'm left with the ovular aperture, which is less than ideal. Anyone have any further ideas?
Yesuuu, now it's just not an annoying issue anymore
Big hugs fellow player :D
Idk, I guess not since its a small mod that doesn't interfere with anything
Have you tried turning Screen Space Shaders off to see if that fixes it?
Yeah, I said that in my op. I can try again, though.
Yeah, this is what I'm left with when I turn it off.
Before the update, it was just a nice circular aperture.
No I mean the mod not in MCM
Hey guys, just updated Gamma with the new patch and I'm getting this fatal error here. Anyone have any ideas?
Ooooh. I haven't tried that. Give me a few minutes. It takes forever to close out of and load into this game.
I feel you man, gets even worse when you crash and you somehow manage to replicate it without trying lol
The frustrating thing is it was just fine before the update.
Yeah its probably going to be fixed with SSS off
HALLELUJAH THERE'S A DARK MODE FOR MO2!
I can finally stop searing my eyes every time I start it up!
God bless dark modes
For real. I have a few friends that like to keep their phone and apps in light mode and I cannot comprehend it. I love them dearly, but they're insane.
Uh, I'm confused. I disabled SSS and relaunched the game, but it's still in the MCM and nothing is different. Toggling it off just removes the nice, round reticle....
W a t
either disable mod 282 to play on DX10 or play on DX11
You removed this one yes?
Yep!
Idk then
Interesting, wasn't giving that issue before, but I shall give it a try
still having the issue where I cant hear anything behind me
Me out of idea
do i have to do anything in the m02 before i do the full Gamma installation
i just opened it and closed it
Open it, choose the game, close

Okay okay wait, try reinstalling the mod and then turning it off
How do you reinstall a single mod?
Worked like a charm, thanks for the help!
Replace the mod when it asks you to
Tried it, didn’t work
Woah, hang on a sec. I reenabled the mod because I figured I should have it so before I started to reinstall it and a bunch of lines turned green and red. What does that mean? Is that ok?
Did you get close to him? As close as possible?
He’s gone from 500 to about 590m and still increasing distance
So
Yeah thats normal, green is stuff it replaces / changes something the other mods have and red is stuff that replace it / change something the mod has
Either he’s trying to leave the zone, or he’s fallen into the backrooms
So what I'm hearing is don't worry about it and just reinstall.
Man's Forest Gump, try messing with companion anti AWOL
Pretty much
How would I go about that?
It's asking me about a BAIN installer. What is that? Should I hit yes or no?
Go to MCM and tinker with it
someone know what mod i have to disable to be able to sleep when I want?
I think YACS?
These two I think
No thats campfire saving
Hit yes and pray 
Oh.
in m02 do i need to choose the game launcher or the folder anomaly is in im new to this stuff
Well, here goes nothing.
@long lava @onyx cargo thanks
Game folder, not game subfolder or similar
Gonna try reinstalling anti awol, see if that does anything helpful
It just gets even more complicated! I don't know what any of this means!
Best of luck, MCM didn't work I imagine?
Hit ok and pray even harder

HERE GOES NOTHING! 
I don’t know what MCM is
Thats all you gotta do in MO2, did you install everything else?
@hallow vector #⏩start-confirm
Ohhhh gotcha, okay so press esc in game and look for mod configuration something, look for companion anti awol there
i have gamma in a folder and the launcher in another folder so i think so
@long lava I think it worked? But in the MO2 log it threw an error and said I'm not currently authenticated with Nexus and would I kindly do so?
As you wish, doesn't affect anything if you're logged in or not
and did all the steps in the gamma installer besides the full installation
Got it. Well, time to disable the mod again, relaunch, and see if it worked, I guess.
Then close MO2 and follow the instructions that you're missing, best of luck to you man :)
okay this is my third time lmao
Third time's the charm
Open your latest installer log, ctrl + f and search for the line with this mod name
Aye this is the one chief you got this 
delete ModOrganizer.ini in the gamma folder and then launch MO2 again
How do you open the installer log specifically? It's not just the log at the bottom of the MO2 window, is it? I know diddly squat about MO2 for the most part.
Hello everyone, hope you are all doing well! Any help on this would be appreciated. Ever since I installed the last update it gives me this CTD when I travel to army warehouses. I've fast traveled there once, it didn't crash initially, took a couple steps then, Crash.
Groks modpack installer folder in the gamma folder
!full you're missing mods
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
Nothing of use, it all pertains to just making the companions not run off during combat
Nothing to help with going on a journey half a mile away and needing teleported back
mod configuration menu bro
Was just told that, but thanks
@prime fulcrum I am? huh. Any guess on what it might be? If not then its time to do some looking! thank you for the help btw
I’m talking about my companion being 500m and rapidly getting further away and needing a way to bring him back
@dark mica
Have you tried changing levels?
!teleport
You need to enable a mod in MO2: Quick Companion Teleport
When you're in game, press J. Be sure to be close to them, 200m is the maximum distance you can be far from them, don't go over 300m.
Also, if their health bar is grey, that means that you're far from them and they won't "hear" you.
You'll need to get more close to them, sometimes you'll need to be right next to them in order to "teleport" them.
@prime fulcrum Just did that 10 min ago but i guess it won't hurt to do it again
Multiple times with no change, distance just gets further
Just curious on something a bit minor, but why does death card cabin no longer play on the main menu?
Welp, in that case I’ll pick this up again tomorrow, it’s late and I don’t wanna trek all the way back to yantar to hopefully see if I can get my companion back
@long lava No dice, sadly.
This is the entry in the latest log for SSS
Add-on already downloaded, using cached version located at: ..\downloads\ScreenSpaceShaders_Update12.6.zip
Deleting content of the previous version of Screen Space Shaders in ..\mods\190- Screen Space Shaders - Ascii1457
Extracting to ..\mods\190- Screen Space Shaders - Ascii1457
Instructions solving...
Copying ..\mods\190- Screen Space Shaders - Ascii1457\00 - MAIN FILE
Copying ..\mods\190- Screen Space Shaders - Ascii1457\01 - SSDO
Copying ..\mods\190- Screen Space Shaders - Ascii1457\03 - SSR
Copying ..\mods\190- Screen Space Shaders - Ascii1457\03 - SSR - Patch ( ES & Beefs_NVGs )
Copying ..\mods\190- Screen Space Shaders - Ascii1457\04 - SSR Water
Cleaning add-on folder
Generating meta.ini file```
there
read
No idea then
it shows the options
Like I said, I’ll pick this issue back up tomorrow, it’s late here
Id tell you to leave him but I know what it feels like to lose a companion, try loading a save before the 500+m incident?
Game crashes when I reach the squared region. It only happens in one save file, even with default modlist. New save files and other areas in the game work just fine.
So what am I supposed to understand about this? It seems to just follow the same update/install process that it does for nearly every other mod in the pack.
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
you were asking about the options when reinstalling
Yeah, I suppose I was.
I guess I'll just wait and see if the next update fixes my problem. Nothing is seeming to work. 🤷♂️
well they're right here
Is it only with that one sight?
I
I mean, it's the only sight I have to test it with. Unless you count the built-in sight on the Armsel.
But that one doesn't have any magnification.
screenshot your MO2
I see, is your screen a wide one?
Idiotic question, but uh... how do I holster my weapons in GAMMA? Swear to god I can't see the keybind lol
B
@slate frigate #⏩start-confirm
Yeah, an ultrawide. 3440x1440.
Can I put it away completely without only lowering it?
click the button that you used to take it out
ah
!bas try this
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
thank you lol
#│💻keybinds-in-gamma also
Ty I'll try
Not sure but you might need a BaS patch for that since it only supports "normal" screens
You know..... That sounds familiar. When I first started playing the game I noticed there was a 21:9 patch and I enabled it, but I'm a set and forget kinda guy, so I think I completely forgot about it in the last few updates.
Yup you need that lol
Should've asked earlier since I saw your game looked different than mine but didn't really read into it too much until now
Now I gotta find it. I should just search it but I'm too lazy to be lazy. XD
It might be this one
Read my mind
ALRIGHT, LET'S TRY THIS BUGGER AGAIN!

360 mods enabled, let's gooooooo

In 360 mods I believe 
what
it's supposed to be #📍577-mods-in-mo2
Yeah, I know it's not default (completely forgot this is technically the wrong channel), but I just switch out the minimap for the compass since it's a pick one, and enable unlimited stashes and the stutter mod. Nothing that should affect scopes.
Imagine default mod number
I'll try to be more cognizant of that next time. Sorry boo.
What a grand idea that'd be. 😂
Hey. Hey @long lava. Guess what....
Dunno what?
Imagine a 21:9 patch doing what it's supposed to do when it's enabled.
Thanks broski! We got there in the end! XD
Has anyone reported this yet? Mp7 with a specter, and holding a svarog detector in the other hand. Putting away the detector fixes this.
Mfw we lost so much time bc my dumbass wouldn't ask the resolution
Yeah, that would've helped, but to be fair, I didn't think of it either.
Welp atleast we got it to work in the end, and learnt how to reinstall mods too!
Now I just gotta find this motherfuckin anomalous sample that's in some underground tunnel that I can't find.
Indeed!
this just started happening today in game, any way to fix it?
It's not my GPU dying, since this is the only game it happens on and none of my other games today have had this problem. I also already reinstalled once
"this" i. e. what
the white dots (well, multicolor) and screen tearing
kind of hard to see I admit, but it's worse while playing than seen in the screenshot
basically makes it impossible to play
This is gpu-memory related.
That's how my first gpu died. First it happened only in a handful of games and then it got worse.
this GPU isn't even 2 years old
hope not, this GPU was nearly $1,000 when I bought it, and they aren't going to replace it after 2 years for me
You can certainly try to reduce the clock of the gpu-memory.
are there any clear signs that it's dying (as in temperature)? From what I can read from my GPU and CPU monitor, it's always running cold and not being over stressed
maybe wiring? idk
I might be coping lmao
There's no harm to be done in reducing the clock. It's worth a shot.
fair enough, might end up doing that. I'll give it a day and test it on a bunch of my other games to see how it fairs
I'm a fresh Anomaly/GAMMA Player, So I've followed the install instructions to the letter in 📍how-to-install and in MO2 it only Shows 333 Mods installed, Don't understand what or where I missed/messed up with the install.
Does your gpu also report memory temps?
screenshot your MO2
scammaz 
it was late 2020 and it was a 3060 ti, so yeah, I got scammed 
I cry when I see 3060 ti prices being half of what I bought it for, but at least it will (hopefully) survive through another 10 years or so and still be competitive for a mid tier card
Hello, I've just done a fresh install but there are only 331 mods active and not 357. Should I download Gamma Addons again?
screenshot your MO2
Fingers crossed 🤞
go to moddb.com and screenshot
if i do a new full reinstall is it gonna screw my save data???
It has me flagged 😦
can someone tell me how i fix the mods in the MO2 ? i try to fix them since yesterday. and reinstalled the entire game to be sure. i also downloaded the mods twice allready but everytime i get banned on ModDB for 1 Hour and it looks like this
i started a new install because i was having problems with my game and i didnt think to ask beforehand
just did one download though
come back after an hour
come back after an hour
i did.
go to moddb.com and screenshot
my ban is gonen now but im not sure what to do now
what should I do when the hour is up? Try a full install or install addons?
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
@hardy girder ⬆️
i did it after it failed the first install. but it gets me banned every time
ass clenched 
Hey, just an update. The crashes stopped and the game is running just fine after doing a Full GAMMA Installation. Thank you
'[LSS] Spawning object [placeable_case33368][placeable_case][33368]
! Can't find sound 'weapons_gunfire\mono\sniper\close_distance'
! Can't find sound 'weapons_gunfire\mono\sniper\medium_distance'
! Can't find sound 'weapons_sd\mono\tail\dmr\tail_sd_2'
! Can't find texture 'sights'
! Can't find texture 'pm'
! Can't find texture 'wpn\wpn_scope_bydy'
! Can't find texture 'wpn\wpn_scope_glass'
! Invalid ogg-comment version, file: c:/anomaly/bin/..\gamedata\sounds\weapons_gunfire\stereo\ak104\close_1.ogg
! Invalid ogg-comment version, file: c:/anomaly/bin/..\gamedata\sounds\weapons_gunfire\stereo\ak104\close_2.ogg
! Invalid ogg-comment version, file: c:/anomaly/bin/..\gamedata\sounds\weapons_gunfire\stereo\ak104\close_3.ogg
! Invalid ogg-comment version, file: c:/anomaly/bin/..\gamedata\sounds\weapons_gunfire\stereo\ak104\close_4.ogg
! Can't find sound 'weapons\vihr\vihr_draw'
! Can't find sound 'weapons\vihr\vihr_holster'
! Can't find sound 'weapons\vssk\barry_vssk_trigger'
stack trace:
at address 0x00000001405950C7'
so i updated to the anniversary build today, and now when I get near my main stash I CTD with this. Any advice here?
Have done a full reinstall
have 357 mods
Any fixes for X18 door codes not working? Found scientist, reloaded, restarted etc etc, nothing seems to fix it
@sharp sigil #⏩start-confirm
screenshot your MO2
Hello everyone. What is the correct way to enable the mod list in MO2? When I enable all is 416 appears, would anyone know where I'm going wrong?
Mods are broken (X) and you're missing almost half the modlist too
what didi i do wrong
Why are you enabling every mod?
okay. i installed the mods all over again. wich Louncher should i use to start in MO2 ? Anomaly Louncher or Anomaly (DX11-AVX) ?
im logged in as a guest
I thought I should enable them all. I'm a little lost in this part, I followed the guide, but this part of activating the mods was not clear to me.
But you don't see a big red wall saying you're marked as a bot?
You don't
The installer does everything for you
We're using an installer literally so that we don't need to do anything
dont see anything
anyone have a clue why my hunger/thirst/sleep look like this
You're not blocked then
Press Esc
MCM settings
Better Bars or something
Check the GAMMA compatibility
sick thanks mate
Yeah you're fine, you followed #old-how-to-install right?
!default @slate cape follow the "mod list" part, make sure you have 357 mods enable, not 416 or whatever number you have now
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
But when I open GAMMA through the shortcut, no select add-on appears, is this normal?
this is the 3rd Full install i did but it still wont work. is there any info on how often i have to install it in order for it to work ?
Read above
!full I think you need to do this @rugged island
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
I'm stuck on step 10 of the install process there is no shortcut how do i make one
Thanks 🙂
!shortcut
The installer didn't create a shortcut for G.A.M.M.A.: #╭📖faq message
ty sir
go to moddb.com and screenshot
!full then
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
Hello everyone, i followed the steps above and installation guide aswell and when i try to launch gamma simply wont open
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Can't disable the "Ballistic Overhaul" game crashes when I hit enemies, any idea why?
it looks fine
You REALLY deserve to get paid, thanks a lot
Im sorry im probably the millionth person to ask this but how do you update your gamma mods?
Where can I find a military merchant?
the instance manager is completely empty instead of showing mods for me when i open mo2
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
@static cypress #⏩start-confirm
Anyone know what this error is abt? I have mag redux enabled as well
@north igloo #⏩start-confirm
cant complete the clear and hold the pump station for clear sky quest, have cleared it and all, quest marker hasnt changed or anything
!scrambled
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
where is Download gamma data?
Update your installer
is there a way to do that from the installer or do i need to redownload it?
Redownload it
how do i get antivirus to stop flagging bootup?
anybody seen this after entering Gazprom underground?
Turn it off or create an exclusion
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
i get that after loading in like i press play it loads then says that
screenshot your MO2
what did you enable
I have 1 extra mod enabled 'turn this on if you stutter'
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
I'm having a problem, the mods are activated but when I click on run it looks like it's loading but it doesn't open and it gives an error sound, but no error appears, there is some log file that I can see what's wrong
exclusion for just mod organizer? or what other files am i excluding
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Which app is being blocked? Exclude the one that is being blocked
instance manager, set an exclusion but its still giving me antivirus error
!full ?
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
It's working now. Thanks for your help 🙂
Set one for MO2 and one for Anomaly Launcher
ive done that twice now
well you'll have to reinstall all mods then
delete contents of folders mods and downloads inside your gamma folder, then do full gamma installation
my 1P29 doesnt zoom in any more and the optical area is now just black
set exclusions for those, for both anomoly and gamma FOLDERS, neither work
okie
ok i tried so hard to not bother ya'll, but i get a crash when hitting start after character creation.
halp?
i doin the thing now, will report back ❤️
how do i force cancel or complete a quest? (as in in console or however)
help my game look like this : (
dont see any x's
i can go into menu fine
what do i have to do at this point if it looks okay
got this while making a wish at the wish granter
all the riches of the zone option
why do the mirrors only show one folder to download it doesnt show the gamma addons
Karabiner 98 Krutz won't load and causes my shotgun to not load either when equiped
i'm getting a ton of "pathnotfound" errors. any ideas?
is that from the installer?
Hello, just did a fresh full installation with a successful 357 mods active however on startup from MO2 I get this error message.
It gives me the Anomaly startup page instead of the Gamma one also
i made a fresh install and instead of the gamma stuff on launch of anomaly (dx11) in mo2 im getting this popping up and the game crashing. not even making it to the launcher or menus of gamma
That makes 2 of us
i was playing fine yesterday, had many issues this morning so i did fresh install on new harddrive
yeah.
unsure if powershell commands failed i made sure to run as admin
Same, I started getting crashes pretty bad so I reinstalled and now nada
same happened to me, appears to be normal actually. errors occur in the background on install and seems to work itself out. just let it finish installing
coool
this may help
Hey guys, I have a very small issue but it's kinda driving me nuts. It's kinda hard to see but I captured it on video finally. Occasionally there is a bright spot that appears in the very center of my screen that looks like a faint flashlight and it only appears if I look up. I don't know what this is, is this lens flare? Is there any way to disable it?
https://streamable.com/1nlpr5
it at least got me to launching gamma 🙂 ty
you're welcome
I have a AMD GPU and have tried implementing the suggested fixes to stop the random crashing that occurs, but it isn't really working.
Are there any other fixes that can help me?
Also previously when the game crashes it would notify of the GPU's failure, but more recently it crashes my computer and restarts it.
i crashed out with this error when i tried to load my backup save.
this is the same error ive been having issues with all day
I keep getting this error when trying to start a new game
change your FOV. default is 80
Reinstall “245- Hideout Furniture - Aoldri”. Find it in MO2, right-click it, “Reinstall”, selecting these options:
00 - Main
02 - Anomaly Radios Extended
03 - Props
“Replace” when you are asked to.
If this does not work/you don't see those options when reinstalling, cancel the reinstall, you'll have to download it manually (I will provide instructions)
sounds good thanks I'll try that
dirty fix, waiting on proper fix: disable "248- Night Mutants - xcvb"
on m02 do i have to click run after i download everything
I'm not seeing the options under reinstall for the mod
to play the game? yes
https://www.moddb.com/mods/stalker-anomaly/addons/hideout-furniture-hf
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
thanks I'll try that
Did what you advised but it didn't fix the issue
!scrambled
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
Whats the fix for not being able to reload new mags? I have them equipped in my loadout but it wont allow me to reload w/ keybind
change reload keybinds in settings
it's set as f10
Also, @torn plaza #⏩start-confirm
Ty!
i haven't played the game in about a month, just updated and launched and now I have busyhands. I didn't change any animations or anything in my modlist (outside of updating) so idk what messed it up
happened in Cordon?
if so just save at a diff campfire and hit f9 to load save and it'll fix it
!blackscreen
Follow this: #╭📖faq message
no im in dead city, but i'll try that anyway
The MO2 or the game? If the game, try DX11 non-AVX
i cant light campfires, i cant fast travel
this is really annoying
is it fine if mods have conflict
I'm still having depth of field issues even when unchecking the boxes and dragging the sliders to 0
You’ll need to find an already lit camp fire
For all the screenshots, you didn't show FOV, in the regular settings
I also try disabling depth of field in the advanced section, even after applying the setting keeps on getting turned back on
I assume one of the mods is doing that
My settings reset after every update, which is frustrating. Not sure here. Reset to defaults?
I'll try that in a few
Actually just got to a campfire, I'll do it now
Reset everything?
didnt help does it matter if mods have conflict with other mods
Also general game settings or mod settings?
IDK. Just throwing you a bone. I would start with game settings personally
now i cant save, its crashing ever time i try to
If it won't launch someone should look at your log files.
Restart your computer.
?
Would it be possible to just disable the mod from the modloader?
Not familiar with how to do so if that is an option
is it right?
Not sure and mine isn't in front of me. Mine said DX11, does yours? Have you looked at the FAQ threads?
@unkempt violet #⏩start-confirm
Hey everyone, Is there anyway to activate DX9/DX9-AVX? I can activate all DX11 , DX10, and DX8; however DX9 loads to base anomaly and then crashes on start up. Any help would greatly appreciated👍
dx9 is not supported
this keeps happening when I try to start a new game any help please
tried, didnt work
i dont know what else to do about this
Do other 3d games work? That looks like a computer problem.
How about DX11 non-AVX?
i'll try both
Can anyone help, please
I'm going to a monolith base on Radar and there is a house close to the Red Forest gate.
I have a stash in that house on my PDA and also some monolith soldiers there who shot me. But all doors to this house are closed and monolith guys just going through them (doors)
And I can't get to the house to loot the stash and kill these guys
FAQ has a guy that has many of the difficult to locate stashes.
You may need to remove your noobie tag to see it
Update your video card driver?
!152 it's in the #old-how-to-install...
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
@burnt reef #⏩start-confirm
how do i get back to the original loaded mods
im not sure how to get back to have the right mods loaded
!scrambled
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
i can play apex and OW fine
DX11 non-avx didnt change anything
drivers are fully up to date
i dont know what else to do
thank you but now the launcher will just load and dont launch to the game
still getting the same application error
screenshot your MO2
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
new user here, just installed the game, only error on the launcher is this:
[2022-12-05 06:02:01.109 E] [error.cpp:24] Unable to parse file "E:\SteamLibrary\steamapps\appmanifest_251570.acf": vdf.parse: unexpected EOF (open key quote?) (appmanifest_251570.acf, line 1)
this seems to be unrelated, game still crashes on launch
the bot message above yours
i think i'm missing some files according to the log, just not sure how to remediate
what do I put here?
thank you it works fine now
gonna try to play the game tomorrow but looks good so far
i copied the k98 picture files/folders into my anomaly install and overwrote, still crashing
Gamma crash on start new character
ERROR: CGameObject:net_spawn() Object with ID already exists! ID=26644 self=sim_default_killer_226644 other=sim_default_killer_226644
! Failed to spawn entity 'sim_default_killer_2'
ERROR: CGameObject:net_spawn() Object with ID already exists! ID=19405 self=anim_binoc19405 other=anim_binoc19405
! Failed to spawn entity 'anim_binoc'
Anyone know what causes this error??
have multiple mods saying "no valid game data" this is my 3rd install today game is running fine but wondering if this is a concern
screenshot your MO2
change your fov to 80
oh?
i'm doing a full reinstall, i'll post after

