#🔨base-gamma-support
1 messages · Page 221 of 1
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
Note that i don't have any other issues with gamma mod other than this issue and it persists over multiple playthrough saves and fresh installs...
Not I was asking for but still thanks
my point is, afaik there is no way to get a gun in this game outside of Aslan's patch lottery, stashes and killing other stalkers
also idk who tf meeker is
!busyfix not sure if this works, seeing as your specs should be fine, but give it a try anyway.
If you never have an issue again afterward then please ping me at some point so we can work on better solutions for the future.
A possible fix for busyhands if you have the "Turn this on if you stutter" mod enabled: reduce the auto_switch_distance_start in small increments of a few hundred at a time in \GAMMA\mods\Turn this on if you stutter\gamedata\configs alife.ltx.
Start with like 300 or something, then every time you get busyhands randomly, reduce it by 200 more.
If the fix needs to be resistant to changes made by the installer make sure to also modify the alife.ltx file in \GAMMA\.Grok's Modpack Installer\G.A.M.M.A\modpack_addons\Turn this on if you stutter\gamedata\configs
Meeker is this merc in pripyat outskirts,
when was the last time you updated?
i just did a clean instal about 3-4 days ago
because this one should have addressed your error #📢announcements message
ah. do another update, #old-how-to-install method II
excuse me, did i make a mistake upgrading to Windows 11? it makes me put Stalker: GAMMA in compatibility mode for Windows 8 via the troubleshooter and now i have bad freezes after 1-2 secs
i've been playing on win11 this entire time without putting it on any compatibility mode and it's fine
hmm alrighty :/
@sharp bough 357 mods installed thanks, just wondering if i can just change to dx11 from dx11 avx on anomaly launcher and mod organizer to avoid the performance drop from avx mentioned in one of the install guides
hey guys, can somebody tell me please if i can somehow disable temporary health and still use this health system?
Ok thanks. I'll try that fix tonight after work
yes
pick which ever is better for you
!avx
Actual explanation at the bottom but simply put:
Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.
Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.
Is there any way to make my aim and binoculars less foggy
Hello. I installed everything according to the instructions. How to solve it?
^ yeah i had to wipe my pc so i reinstalled and now i only have 329 active?
@tall merlin @prime willow go to moddb.com and take a screenshot of what you see, then post it here
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
thanks
also, get rid of newby tag
#⏩start-confirm
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
is it me or Gamma started to crash so much more after anniversary update ... i did the update as usual nothing went wrong (gamma data + full installation) ... i use dx11 (without avx) ... 6 crash in 2 days ... usually looks like in game loading squence where hichups like a 1 second lags now turned into crashes ... new map and 3 seconds later crash :/ ... what could be wrong ? (didnt change any new settings after update btw everything is the same)
when I click "Download G.A.M.M.A. data"
is your antivirus off?
is there a way to turn off the dof?
Yes
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
did you run as admin?
Yes
uhhh.. was that error there before?
Yes!
Like these: "DLTX ERROR Attemped to override section 'wpn_ash12_ac10632_hud', which doesn't exist."
I also had a crash shortly after, refering to a missing variable (item_visual) in actor_hud_loner_sunrise. I know how to fix it though.
BINGO ... my log also saying DLTX error ... so there IS a problem
How 🙂
Yes there was
so um... why is my floor shiny now? any tips?
guys how do i apply an upgrade for a weapon?
oh shit, it was r2_gloss_factor apparently...
Depends. But this might not suit everyone since it's a bit more advanced. But first figure out which mod is responsible for those items. These "hud"-files are mostly related to outfits. It might be easily solved by making sure that DLTX mods are being loaded in the proper order. If that's not enough, or If it's non-DLTX, I usually search the files for the related definitions and/or variables (e.g. "actor_hud_loner_sunrise") to see which mod exactly modifies that outfit (the sunrise suit in this case). In my case some file/script/config tried to access the variable "item_visual", but it's not existing, which usually means that another mod overrides changes that are required for the first mod to function properly. So this might be an incompatibility. Either remove incompatible mod or make it compatible by adding in the related changes manually.
Is there a solution to this problem?
Yep... thats a bit more advanced for my tired friday mind... So at the moment i'll just wait and hope for a fix on the next update i guess...
Hey sorry if this is alr brought up but couldn't find anything on it. Had secret package from anonymous end up here and with the lamp aftifact I was able to confirm this is area but when I open up the stash it's empty. Any tips on getting to it/getting it to work?
ey thanks forgot about my AV guess it was fucking with the DL's this worked for me
It looks like the bug was caused by one of my folowers. I supect when teleporting. Should I file a bug report or something?
if you want to report it go to #1040164855325409310
i would need some help i'm in the game but it's like my keyboard doesn't work except to shoot and "ESC"
excuse my english use translate
As far as I can tell the only mod that messes with these is THAP Rework
But I didn't check into all DLTX mods yet
And the DLTX issues are somewhere in the process with BAS - or where BAS gets overwritten partly
game le crash
Looks like busy hands, you should try reloading the save.
Exatly the same DLTX files for my errors ... 'dolg_voin' , 'dolg_scientific_red'
how i le fix
"[error][ 8] : Not enough memory resources are available to process this command.
at address 0x0000000140183AEC"
i try reloding save atn no work
looks like it might of just hit the memory limit its common with the xray engine, what were you doing when it crashed?
atn "and"
Is your RF Reciever still beeping? Its not a stash its actually a package item you unpack in your inventory.
Yeah it’s still beeping
Hi! i'm trying to disable the brain scorcher, when i enter the lab i walk down the hallway and just before reaching the door my game crashes. I tried loading the game multiple times and is always the same result in the same point of the hallway
Any ideas?
anyone know the solution to the game freezing whenever it tries rendering things or at least minimize the freezing
Theres a package on the ground you must find and pick up
Do you have the stutter fix mod enabled?
does it come with the pack:?
Potential fix:
- Go to
\Anomaly\appdataand openuser.ltxwith a text editor.- Search for
snd_cache_sizeandsnd_targetsthen reduce their value from256to128- Launch the game and open the settings.
- Click
VisualthenAdvanced.- Slightly reduce
Texture detailandObject detail.
!stutter
- Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on
Download G.A.M.M.A. dataand thenFull G.A.M.M.A. installation) - Bring your modlist back to default (type
!defaultin #🤖bot-commands) - Enable the "
Turn this on if you stutter" mod in your MO2 (you can found the mod under theG.A.M.M.A. Fixesseparator) - If you have a NVIDIA GPU, you can enable
Triple Bufferingin NVIDIA control panel - Open Anomaly Launcher via MO2 and tick
Prefetch sounds - If you have a beefy GPU, use
Anomaly (DX11)
Are you using the stutter fix mod?
im not sure if its normal, but for the carabineer shotgun, when my guy loads the first shell he pumps back and imaginary pump. is that the normal animation?
Are you on the latest version of GAMMA?
yes
Must still be a bug then, I think Grok is still trying to fix it
so 3840x2160... I think my gamma res is at 1920x1200 and wont change up to 3840x2160
well, two mods aren't working grulags dead bushes and the artifact spawner under the map but I dont think those should hamper the animation
I see thanks for the help doing it now
Game is soo dark, how can ı make it bright
Bois
Game is stuck on the loading screen for 20 mins now, first time creating a character
Wat do?
Define "dark".
Screenshot maybe?
!crash send this log
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
!resolution do this:
If you crash upon changing your resolution in game, you can change it before launching the game. In Anomaly/appdata/user.ltx look for the vid_mode line and change it to the resolution you like.
What DX version do you use?
DX11-AVX
There is something odd with Trader Overhaul. I just wanted to check some files inside it. Whenever I attempt to double click it in MO2 it sayss it cannot find the path. But it's indeed there. However, the included files won't open in any program (like NP++), but only with normal Windows Notepad, which is weird. Then when I open the mod's folder in windows explorer, it's clear that it's not properly configured, since the 1.5.2 files for Trader Overhaul are in a seperate folder that won't be applied when the mod is enabled in MO2.
I don't use it though. Just wanted to check something and figured this out. So something is wrong there. I already made a full install twice, etc.
I can't read the clock on the , what time is this?
My headlamp not enough for make environment bright enougt (sorry for english)
08.59
All things not relating to the default modlist go to #🔨modded-gamma-support
Did the backpack animation get removed with the latest update(s)?
Screenshot your ModOrganizer2 (MO2)
!busyhands read this:
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
Game didn't crash
Actually....it just loaded
Now im faced with a different problem tho, game is extremely slow
Yeah, sure. You're right. But I posted it here, because this might lead to an overall issue with the installation, that could be very well affect the default modlist too
Ah, ty
I wanted you to send the log anyway, but whatever.
Send your PC specs
Did you disable a mod?
I can still send it if u need, friend
Maybe few , for more fps. ^^
!default I need you to run the default modlist if you want help in here, hard to help custom stuff
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
do the mod list part
How can i make it default , cant remember what i changed.
And soo sorry for tskin your time, im just helpless
Soo sorry but with"installer" you mean what
ok, now screenshot MO2 again
Damn, 3840x2160 might be a little too much
game still dark?
Lemme check
here's the crash log
Hi there, quick question - since the recent update, could it be, that the "Depth of Field" setting under advanced cannot be removed?
PC specs?
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
cheers
the pc specs
6 gigs ram
nvidia geforce GT 525M
core i5-2430M @2.40GHz (4 CPUs)
AKA le potato
holy shit
ah, that does it.... I'm not sure you can play GAMMA sorry.
This modpack is quite CPU and RAM heavy. 
Best I can suggest is a few performance things, like running DX8
!dx8 also #old-framerate-optimisation
If you're playing (or if you want to play) with DX8, you'll need to do something first (this also applies to NVG): <#╭📖faq message>
oh
quite disappointed I cannot run gamma on 3840x2160
Go to #⏩start-confirm to access the framerate channel
Still dark, now i have fps drops
Crash Report
One further thing - PU scope: anybody else had some issues when using it?
!k98 try this :
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
I have not, no.
Describe the problem
Pc Spec... 5600X / 1080 ti / 16gig ram / M2 1tb ssd ... since my last message game crashed twice 😢 ...
Basically, when i zoom in, i enter the star trek Warp view
May i share a screenshot here?
You do have #📍577-mods-in-mo2 right?
And no ❌ in MO2 under flags?
yes
Yeah, it persisted also before the recent updates
All done cap, imma go check game now
how do i fix my shortcut so i have the gamma icon and get straight into the game?
!shortcut *maybe * this?
The installer didn't create a shortcut for G.A.M.M.A.: #╭📖faq message
Is your screen aspect ratio a non 16:9 ratio?
also, what resolution are you running?
standard 16:9 - 1080p
and your FOV settings please
88 and 0.56
The game only uses one core right? Shouldn't I disable all but one core then? I only have an i5-7600, so which core should I keep? Should I only disable 0? BTW, it seems that core 0 is sometimes re-enabled; is there a reason for this?
Not sure what re-enabled it
Set them to 80 and 0.65 then test the scope
the shortcut takes me to the launcher with all the dx versions and mod list etc, it doesnt say exe either
The reason only core 0 is disabled is because Windows like putting stuff there, inkl. GAMMA.
You can try setting only a single core if you want to
Done - even worse, Frames are dropping^^
Try this then
It could be a somewhat broken mod, try this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
Hi, I am wondering if I can't seem to update the game through the conventual means of "Gamma Installer", could I delete all the data and go through the initial instillation prosses again?
Why can't you just use the installer?
Wowwww better , but now im gettin like 20fps
Would there be any benefit to single core vs just disabling 0? Also, what keeps making it enabled again every so often?
Progress! I guess, hold on
worked great thanks, the icon isnt the same as the modorganizer im assuming thats expected, im doing that gamma icon anyway
!core No idea if disabling one or more is better, test it I guess.
look here for 'permanent' fix:
How to disable Core 0: #╭📖faq message
It wont update saying that the " modpack_marker_metadata" could not be found.
So I should just use the third party app instead? Task Manager works, but I'm not sure what makes core 0 become ticked on again every so often. Maybe it's whenever I launch through launcher to change settings?
🤷♂️
Thanks anyway
Open MO2 then search for jaku and screenshot
No luck. I mean its no deal-breaker. As long as other long range scopes are unaffected (not yet tested)
Disable that one mod
I honestly have no idea what is causing the scope to be like that, maybe try asking in here again later when another Helper is looking
Sure thing - thanks tho for the quick response!
If you are too busy i can be here next time buddy (disabled btw, imma check fps again
I have time, for now 
is this the right place to ask an ingame possible bug question?
shoot, if not I'll redirect you
why is one of my followers not going to fight when i'm surrounded by 20 enemies? my other follower did and this guy just followed me...
oh wait, maybe affiliation?
is clear sky or loners friends with mercs?
Try holding C then telling them to hold fire and then shoot again.
Affiliation might be the cause also.
Finally, sometimes the AI is buggy.
yes, Clear Sky
The scope on my SKS is bugged and not zoomed in correctly. How do I reset it?
it's my clear sky follower, and here i am surrounded by exo suits and this guy holding an SVD just chillin
first time in dead city too, fml kek
did clear them all though so feelsgood, ty for the help 
Still same bruw, i lowered grass settings but nothing changed, gettin low fps and stutter
!stutter enable this mod start from step 3
- Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on
Download G.A.M.M.A. dataand thenFull G.A.M.M.A. installation) - Bring your modlist back to default (type
!defaultin #🤖bot-commands) - Enable the "
Turn this on if you stutter" mod in your MO2 (you can found the mod under theG.A.M.M.A. Fixesseparator) - If you have a NVIDIA GPU, you can enable
Triple Bufferingin NVIDIA control panel - Open Anomaly Launcher via MO2 and tick
Prefetch sounds - If you have a beefy GPU, use
Anomaly (DX11)
did they completely nerf the radiation resistance of all armors in the new update?
My game glitched up. I saved and exited for a break. I came back, loaded up my save and when I try to leave rostok I just get loaded back into it. Fast travel does the same. I also cannot save or quick save my game. It will say that it saved but there is no save when I go to load it. Restarting the game didn't help
not really, but they increased the water radiation in all areas
Hi, I started a game with free stalkers and while i was trying to complete a job Wolf started shooting me. I looked at the relations tab and I found out that my goodwill is negative 350. I had some jobs to report but now i can't reach the rookie village. What should i do or is there any cheats to return back to 0 goodwill
!goodwill
trying to change your goodwill with a faction: #╭📖faq message
probably
follow the bot instructions bellow that message
yeah i did !move a 2nd try and no luck
something in south of garbage is always crashing my game, i dont get it
im reading that having too many stashes with items in it causes this crash
So, close range Fort 500 (shotgun) with 12x76 slugs can't kill bandit trainee? Or 15 + AP 9mm from Lebedev 15 for one bandit kill? Something is not right here...
your aim ?
like 1 m far away from me...al slugs goes to body for sure (blood splatters) but no kill...six straight shots
am i just bricked out of my save?
so rogue and the other fella are frozen in place, the others never reappeared after I left Limansk earlier, and if I try to go further north, my game crashes
😦
i just reinstalled gamma on my new laptop, but its not working via MO2
and if i launch via dragging the exe to the shortcut to open it via MO2 that way it opens vanilla
Can I kill all enemies of one type on a level? The poltergeist in x19 is only annoying and nothing else imho.
I double clicked streloks notepad telling me how to get to x18 and it vanished ???
i mean you can shoot the thing, unless you mean some kind of cheat, which i done blame you for it is annoying, i havent tried a grenade
no, you don't understand, x19 is a lab that has quite a few levels and rooms
the poltergeist is SOMEWEHRE and keeps throwing shit at me
it also has 357 mods enabled for some god forsaken reason
oh right, i doubt you have enough grenades then, i think if you stop moving it stops targeting, at least in og stalker, i think...
nah, if I stop moving I die in 2 seconds
grenades will not help, I dont know where the poltergeist is
!k98 do this:
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
welp, just run ig, i speedrun that place if i cant see the thng
good luck with that, its filled with zombies, chimeras and burers
please stop if you don't know how to answer my question
i never said i got very far
thanks, seems to work
Hi, guys, can you help, what a mistake
!k98 do this:
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
yall added one of these? cool! anyways gtg
How can I find the right debug command to kill a monster?
Thank you very much
you got debug mode enabled ?
yup
look at monster press F7 and K
yeah that wont help
the poltergeist is SOMEWHERE and it keeps throwing shit at me, it's annoying 😛
If I could see it, I would just shoot it 😛
make yourself god and shoot it ?
Can't shoot it if I don't know where it is.
But yeah, god mode will be the answer if I can't kill just that one via command.
Hey guys, need a bit of help! I've had some issues with this new update and I did the fresh install as some others have proposed but none of my mods are active after the fresh install and I'm not sure why.
I have done a complete install three times now and im still getting the same error
Expression : S && strlen(S)
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 927
Description : assertion failed
stack trace:
!mags
In order to properly enable Mags Redux:
- Enable
Mags Redux (Disable G.A.M.M.A. Unjam Reload)(the mod under "Optional") - Disable
G.A.M.M.A. Unjam Reload on the same key(yes it's a mod, no it isn't a keybind) - Enable
Ammo Check(this is a mod as well) - While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
- After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus) You can also enableMags Buyable at Tradersif you want, it's a mod already inside your mod list
KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file.
The only 100% safe way to do so is by loading a save where you DON'T have the mod enabled OR by starting a new game WITHOUT Mags Redux.
We also have this POSSIBLE workaround if you want to disable Mags Redux in the middle of your game:
<#🖇old-mods-posting message>
so i have a problem in yantar where everyone is attacking associate proffessor markov, anyone know how to make them stop its very annoying xD
Anyone else getting a crash after equipping the Ghillie Suit?
game doesnt even load i got 357 mods and running it on dx11 and still no worky
same here my friend... are you getting this error?
Expression : S && strlen(S)
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 927
Description : assertion failed
stack trace:
nope not even that
doesnt even load i see the little splash screen then i get a windows error sound no pop up tho
I've been trying to solve my issue since last night, and they just told me to do a full install, and i've done it three times and still not working with the same message.
hello :3 i have aslo 357 active
if they did an English tutorial video then ill be alright but following this instructions are very blek of what ive experience trying to even install the mods from the auto mod updater thing
I'm just trying to play stalker tho 
same
!k98 have you tried this?
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
!dependencies make sure everything (not powershell) is up to date
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
Stuff in the distance looks a little bright, is this normal? or is there a console command to adjust this maybe?
that worked for me
umm.... how... exactly do i check to see if they're up-to-date... im sorry if im technologically illiterate i don't typically fiddle with this stuff?
0
Imma need you to use Google, as it would take too much time to guide your through it
Fair enough...
I'm having some weird grainy filter looking stuff on the sky every now an then. Anybody know the cause?
HI GUYS, if someone use the mag redux mods how to unjam the gun please i cant found the keybind
you're standing in a patch of radiation
Radiation causing damage to the light sensors in your eyes
!mags did you disable "GAMMA Unjam Reload on the same key"?
In order to properly enable Mags Redux:
- Enable
Mags Redux (Disable G.A.M.M.A. Unjam Reload)(the mod under "Optional") - Disable
G.A.M.M.A. Unjam Reload on the same key(yes it's a mod, no it isn't a keybind) - Enable
Ammo Check(this is a mod as well) - While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
- After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus) You can also enableMags Buyable at Tradersif you want, it's a mod already inside your mod list
KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file.
The only 100% safe way to do so is by loading a save where you DON'T have the mod enabled OR by starting a new game WITHOUT Mags Redux.
We also have this POSSIBLE workaround if you want to disable Mags Redux in the middle of your game:
<#🖇old-mods-posting message>
its not radiation though, this spot 100% does not have radiation and it happens everywhere
guessing this is a known issue -- i'm crashing when clicking "details" on the artefact crafter. any bot commands/fix?
Take off all your armour
heres a screenshot, its only on the sky, you can see the box isnt grainy
took off all armor, still no radiation
and it is only in that one spot?
no, it occurs everywhere. its like fuzzy grainy pixelation
That really does look like the radiation effect though
radiation effect for comparison
After updating crashes on loading any save. Don't know where the logs are
its similar, but only affects the sky and is a bit less dramatic
🤷♂️ No idea what might cause it, sorry
no worries
They're all up-to date from what I could tell...
!amd ok then, try this:
If you have issues with AMD GPUs try installing the dlls of the x64 folder of the following .tar.gz to Anomaly/bin folder: https://github.com/doitsujin/dxvk/releases
If you still have issues, refer to this guide: #╭📖faq message
Sorry if this is a stupid question but where is the ini.log file at?
hey so currently my game is like all zoomed in after a fight with the military, is there any way to fix that?
Reset your FOV and mouse sensitivity in the settings, happens sometimes
haha thanks that fixed it!
do you have any idea dude please?
can you provide your crash log here please?
then reload should be on f10 and unjam is on r
it's in Settings > Controls > Keybinds
After coming back to the game after I think one month, upon loading any save my psy health is none and I get constant damage, and I can't do anything about it.
yeah you'll have to reload an older save where your psy health isn't 0
you're supposed to die if your psy health is on 0, sometimes it bugs out
okay i check because when i use r its just look at the gun
Hi! i'm trying to disable the brain scorcher, when i enter the lab i walk down the hallway and just before reaching the door my game crashes. I tried loading the game multiple times and is always the same result in the same point of the hallway
this is the error i got
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: f:/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
literally any save i load has this, and it wasnt an issue before so i guess one of updates did this to me, my saves being month apart 💀
Hello, I keep getting this crash log when using a save that has companions active (game works just fine if I start a new game)
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 948
Description : fatal error
Arguments : Can't open section 'squad_lure_prey_controller_1'. Please attach [*.ini_log] file to your bug report
stack trace:
okay i understand the problem i did not add the ammo in my loadout, so my gun was just out of ammo, nice mechanics here, sorry i did not read the mod description in details
when i zoom in stuff is kinda blury or foggy how do you get that to quit
with my weapon
How do I change my torch to toggle?
Did you disable antivirus when installing?
yes including windows defender
when i press download gamma data it says its up-to-date
tried doing full gamma installation twice
tried pressing only install gamma addons
Go to Moddb.com and see if you are blocked from accessing the site
no
So not blocked?
not blocked
hmmm
Is there a fix for the game not saving?
I'm afraid that I'm not up to date on the recent issues relating to the Large Files. Need another Helper
how do i take off the blur when i ads
hello some one can help me please ?
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
Disable the Headlamp Animation Fix mod in MO2
Can I get some help with my random crashes?
!bas do this:
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
!crash send this:
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
im trying to install for the first time and havent even got to where i install gamma but when i launch anomaly i get an error message that states" The code execution cannot proceed because d3dx9_43.dll was not found. reinstalling the program may fix this problem" re installing did not for me
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
!dependencies do the DirectX part
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
@junior moon do you possibly know someone who might be able to help? sorry for bothering but i'm addicted to gamma 💀
Ok I got new bug after fresh full game install, I am not sure what cause my PA blurry and when this happens I can't see NPC faction simbols and loot FDDA is not causing this so somethin different is hapening.
sean how can i do a clean reinstall?
You should just wait, maybe try opening a ticket in #1026866080347603065 to make sure you don't get missed
If you really want to do this then just delete the entire GAMMA folder and Anomaly folder then refer to #old-how-to-install

ok so after starting a new game my psy health is still zero, but i dont take damage
!dof just try disabling DOF and see what happens
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
Try pressing 'Numpad ENTER' and 'H' a bunch of times
thx its back
do not worry my friend... it appear i will have to do the same thing aswell... because literally everything I have tried does not work...
hello please some one can help ?
Is there any possible way to preserve my saves while I do a full reinstall or not?
screenshot MO2 pls
yes, saves are in Anomaly/appdata/savedgames
!delete for everyone trying to do a clean reinstall:
If you really need to delete everything because you're having problems: #╭📖faq message
Hey my game has been running fine I get a rare stutter every now and than. Reloging in army warehouse is causing massive stuttering anyone got a clue if I there might be a setting causing issues or something?
!bas this is the mod you're missing
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
I mean... delete anomaly, and gamma folders, so i can try to salvage my game this weekend and play it, becuase it seems i will have to do that in order to be able to play it ever again
probably just npcs
ty
@unreal topaz see this link
Hi, apparently I lack Admin privilages to do anything with Gamma Installer?
Did you do like I told you to do not long ago?
dont see i was thinking is for jackson barret
hi all! does anybody know about this error?
And just that quick it stopped. Idk
this happens when starting a new game
Reinstall “245- Hideout Furniture - Aoldri”. Find it in MO2, right-click it, “Reinstall”, selecting these options:
00 - Main
02 - Anomaly Radios Extended
03 - Props
“Replace” when you are asked to.
ETA: If you don't see these options, cancel the reinstall, you'll have to manually download - in that case say so and I will provide the instructions for that
that's really an issue for whoever control admin access on your computer...
I am the only user and administrator of my PC
where have you installed GAMMA and Anomaly?
@keen cedar thanks! Indeed I do not see this option, see screenshot
hey guys after activating sequence to shuit down brain scorcher and killing burer before exiting my game crushes without error msg just exit to windows
On my Gaming M.2 SSD Drive.
I need some help with the new dof effect,can't find SSS settings in mcm?
yep, that means the whole thing downloaded wrong. in that case:
https://www.moddb.com/mods/stalker-anomaly/addons/hideout-furniture-hf
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
where are you looking
in Mod Configuration Menu
Send the paths to the install folders example: D:\GAMMA
i went to sss and changed all to 0, it didnt work, i followed k98 and replaced files, and this is what it still looks like
X:\Anomaly
X:\Gamma
this one aldready exist, i leave him or delete ? because is 76 too
leave it alone
okay
and you do rightclick the installer and select run as administrator right?
weird,those don't show up for me
It says I lack privilages to do so
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
I can easily run everything else, just not this file
i cant get it to quit either
What antivirus do you use?
alright,will try ty
Avast, its disabled atm.
right, you need to use google to get permissions back.
It is a huge pain in the arse to do iirc
personally,i've only installed gamma add ons,not a full gamma installation.that could be it for me,not sure for you
ah, that would be why
as in literally that's why you can't find the DOF settings. you need to update SSS and that'll only happen with a "full gamma installation"
delete this one in mods folder right ?
no, don't delete either of them
okay so now just step 7
yes
I FIXED IT. i had to go to advanced visual settings and change my settings back from !K98 and it soldved it
I’ve killed off most mercs but I want to join them is there anyway to respawn them ?
solved
named NPCs do not respawn
!npc you have to spawn them in also good fucking luck lmao
Why good luck?
oh you just mass slaughtered them all, why do you think?
🥴
@keen cedar thanks I managed to start a game after your fix!
@dusky fulcrum #⏩start-confirm
started a playthrough with the kar98. when i go to pull it out, there is no model for it and then my interface is glitched.
hey yo.... got this when updating today: ERROR: Data Error : gamma_large_files_v2-main\G.A.M.M.A. Large Files\gamedata\sounds\music\level\gamma\350_mSv_sanctussynth.ogg ... anyone else getting it? is it a problem?
drag and drop your entire crash file here please
my game keeps crashing it dindt use to happen like 7-8 months ago but decided to install gamma again and now i keep crashing all the time just started a fresh save and loading this save and killing few bandits the game just crashes pretty much same time every time
now is this one 😦
!152 you need to update your Anomaly game to 1.5.2
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
put the crash log in here
where was that again?
crash log is the text document called xray_yourname, found inside Anomaly/appdata/logs. Drag and drop it into Discord
havent crashed yet :P...was just looking to see if anyone been getting this error when updating to new patch.... it's showing up while i install.... installation keeps going.... dunno what it did.. perhaps it worked it out? i suck at tech stuff
then expect to be missing a random ambient track and that's about it
it's a large file, sometimes it fucks up in the download
there's no crash in this log?
hmm.... it's a bunch of these errors.... like textures and shit like.... probably just redownload?
can you make it crash out again and send the log again?
frankly ignore if you can't notice it
well the thing is it just crashes goes black screen and i need to go to task manager to close it
grr i`m lost with this game after brain scorcher crushes to windows without msg tried turning off visuals and AA changed dx11 avx to dx11 and no luck
so not sure if thats the reason it doesnt make crash log
put the crash log in here
no log , nothing in crush dump
Can I disable the near field blur on lvl 3 nvgs?
yes that would be the reason why... unfortunately because it doesn't crash out it's hard to recommend a specific fix. you may as well begin with a full install to update stuff and see if that fixes it:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
I keep getting this crash log when using a specific save (game works just fine if I start a new game) and I wonder if there's a way to fix this or if I just have to start all over again
Expression : <no expression>
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 948
Description : fatal error
Arguments : Can't open section 'squad_lure_prey_controller_1'. Please attach [*.ini_log] file to your bug report
stack trace:```
go look at the beef's nvgs mcm settings
I did. Nothing seemed to change that.
Or I'm dumb.
Send the text document called xray_yourname, found inside Anomaly/appdata/logs. Drag and drop it into Discord
then idk
i just did a full install thou before i started this new save 🤷♂️
screenshot your MO2 then
update Anomaly, this Nov 26 hotfix addressed it <#📢announcements message>
#old-how-to-install method II is the one you want
i would suggest you start with !k98 but be warned i am guessing at this point
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
think i figured it out i enabled EAX this time around thinking it might "enhance" the audio experience but soon as i turned it off i could do that fight out with bandits without crashing 
so guess dont use EAX 🤷♂️
@split frigate this
thx guys
fresh download, updated to 1.5.2, Anomaly ran fine, ran gamma installer as admin, getting this error when trying to start a game and these flagged mods
go to moddb.com and screenshot
lets try this
?
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
ok great it means you can do a full install again
i would suggest you pick mirror 128 or 127 when you do so
ah. run a full install again, Nov 26 hotfix addressed this but you may as well do the full install for ALL the updates.
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
nvm tried the fight again and crashed mid shootout 
thanx, will report back. also hi veerserif
can i stream to anyone as i dont think my files are correctly done but they look like they are?
will do hopefully it will solve my problem without starting new save
you don't have to start new saves when gamma updates
Hello again, quick question. its been a while since i last played stalker and wanted to update it, is there a new improved version of the installer?
If there is not ima just update using the one i have
When I do a full installation a lot of the add ons say "unable to download the add-on archive"
is that just the moddb servers being slow or what
no idea how to fix this
which section you want to see exactly in my MO2 i have only enabled 1 mod and thats the ANUS mod for the names
I've tried to reinstall gamma 4 times now, but I still have 3 mods missing
354 out of 357
!modlist post your modlist here
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
update your Anomaly, p90 crash addressed on 30 Nov <#📢announcements message>
latest installer version is 3.8
!38
1) Grab the latest installer: <#📢announcements message>
2) Open your GAMMA folder
3) Open .Grok's Modpack Installer, it's a folder inside your GAMMA folder
4) Paste the installer called G.A.M.M.A. Installer.exe in here and overwrite
5) Launch it with admin rights
6) Click on Download GAMMA data
7) Click on Full GAMMA installation
8) If you already did two Full GAMMA installations, wait at least one hour or you'll be blocked
what do you need to disable all new music? i dont like the modded soundtracks and would like to go back to original Anomaly ones
Copy or export?
no crash log no service
Send the text document calledxray_yourname, found insideAnomaly/appdata/logs. Drag and drop it into Discord
export
i already did it but it doesnt create proper crash log due to freezing to black screen 🤷♂️
need to manually shut it off
6 monthish ago when i was using an older version of this mod back it was a lot more stable for me did crash but never this often now reinstalling the mod pack i get crashes every 5-10mins 
this worked thx
the crash is weird as well as it happens in different times in the current save sometimes during the fire fight with the 4 bandits and sometimes little bit after i kill them all and looting them 
I did, twice. I wasn't getting any errors while updating either. How can I verify that the updates actually installed?
Getting this error when launching the game after updating. I have the OpenAL32.dll file in my System32. alsoft.ini.back, soft_oal.dll and soft_oal.dll.back are in my Anomaly/bin folder. Not sure what is happening here
I tried reinstalling openAL, no luck
Okay I tried doing a GAMMA reinstall and now I have even more mods flagged as "no valid game data", I check the folders and just have the .ini
is this normal for the installer's console window?
!modlist post your modlist... kinda just have to compare it against the current one
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
missing:
"12- PDA Radio Extended - Starcry_"
"0026","+","29- Dux's Innemurable Characters Kit - DuxFortis" and its patch
MANUAL DOWNLOAD:
https://www.moddb.com/mods/stalker-anomaly/addons/pda-radio-extended
https://www.moddb.com/mods/stalker-anomaly/addons/dick
Instructions:
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
hello i am having a problem with the object i am holding appearing and sometimes they just wont work, is there any way to fix this?
Solved it. I feel so stupid but happy at the same time- my headphones, which are currently the only enabled sound device on my pc, weren't connected 
used the search button and it seems i wasen't the only one who had this problem, what can cause those freezing's for the game is the dynamic music option no idea why it can cause the game to crash but seems it does might want to pop that into the troubleshooting section somewhere
meaning to keep it turned off
Is there a way to make console changes permanent?
Everything was OK yesterday. Is there any way to fix it? Thank you in advance (I'm using the vanilla gamma texture)
Ok I did notice some of the new features like "Field strip menu now shows % condition of parts thanks to Trabopap." so it did update, here is the modlist anyway
turn off everything you enabled that's under the GAMMA Disabled category
!disabled
Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #🤖bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #🔨base-gamma-support, use #🔨modded-gamma-support instead.
this includes GAMMA Companions Rework
does anyone know where the config files are? i need to set r2_gloss_factor to 0.7 instead of 0.5 permanently cause it makes a lot of shimmer on the floor 
you guys know how to make a custom profile so i dont have to redo my settings everytime i update my gamma?
!backup
"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message
Anomaly/appdata/user.ltx
thanks, but i did cfg_save on the console, that should work right?
no idea
!modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
Okay, where can I find a list of all #📍577-mods-in-mo2 that I should have active? There's so much information here and it's a nightmare to search.
Help, I just picked up a new companion at the merc base and now in Jupiter he won’t shoot anything attacking us
He aims at them but won’t shoot
I don’t think any bots are shooting…is this a glitch
The bandit base is being overrun and no one’s shooting
Hello, my game locks up or crashes to desktop when I attack the military checkpoint south of Rookie Village. Replicated 5+ times, only seems to be at the checkpoint. I usually get this in the error logs, but sometimes there is nothing, just hit registers like usual. I have only the 357 default mods.
How can I activate animations like opening the backpack and skinning mutants?
Yeah I just spawned in the outskirts and Monolith can’t even shoot me. What’s going on?
or just pop your modlist here and ask one of us to check
!blind
These are POSSIBLE fixes. Let us know in #1040164855325409310 if they worked for you, we're trying to find out a definitive solution because this bug is very rare.
-
If you are about to die because of the psy health, reload a previous save.
-
If NPCs are ignoring you/not reacting to you, even if you shoot them:
- While in game, hit Esc on your keyboard
- Go to Mod Configuration Menu and search
Stealth - Click Default
- Click Apply
- Enable debug mode (<#╭📖faq message>)
- Press F7 and click on Change Faction
- Make sure that the command box for Invisibility is OFF
- Reload an even older save
This 2 times red dot says it should go on the AK-12 for example, or nato rifles/submachin guns
but it doesn't fit anything
known bug?
does anyone know how to make it more gpu intensive or is it in some part of the game it uses more gpu
that place is notorious for being low fps/bottlenecked by something
all hubs are scripts heavy, your cpu is doing the work while the gpu takes a nap
appreciate you took the time to answer
Thanks, appreciate it.
Is there any way to minimise the grok modpack installer? it's a pain in the ass and taking up a majority of my screen while it downloads and installs and I cant seem to move or minimise it
What is the patch for Dux's that I need to download?
no, but next time before you click any button move the windows out of the way as possible
so you have some space, otherwise if you have multiple desktop, switch to another desktop
it's anywhere that's npc heavy, npcs kill fps
you shouldn't have to since both use the same zip file
i think
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
do those steps
and yes, i only gave you two links, on purpose
if you hover over the AK-12 does it highlight the AC11090 scope? if not, it doesn't fit. disregard the description text, look ONLY at what scopes fit in the Details menu
Trying to reinstall mods because a few of they have x's, and it's giving me this
reinstall it by running the full install
it will install it with the right options
Which Ammo check should I be using to see Magazine check animations?
none of them
also, ask in #🔨modded-gamma-support
no support for customizing your modlist here
Huh? I thought this was an official mod, with magazine ammo check animations
!gammavanilla
What "vanilla" means for G.A.M.M.A.:
Vanilla G.A.M.M.A. is considered to be the G.A.M.M.A. modpack as it comes. This means you have #📍577-mods-in-mo2 and have not enabled or disabled any of those, have not enabled any animations in MCM, and have not added any mods of your own.
If you're seeing this, it's because you're posting in the wrong channel. Go ask in #🔨modded-gamma-support.
Where do I find my logs, got a bad fatal error and now when I boot up my save I have no hands and none of my hud and stuff works
What is the mod in gamma that allows every NPC to offer you jobs/lore?
thanks g
So when I first installed and got Gamma working the magic number is 333. Looks like it's 357 now like you stated after full install. Just need confirmation. Thanks @keen cedar
Those mods in "optional" appear to be functional? I just disabled them to be safe.
yeah it changes every so often depending on the scope of the updates, keep an eye on #📢announcements
Anomaly/appdata/logs, the text document called xray_yourname
although for no hud, press numpad enter?
@keen cedar Are the optional mods safe?
Not quite that, lemmie get a screenshot
It fits nothing
so it's a bug?
Also, heres the log
is there a way to stop the blur with the NVG?
This error poped for me, the game stopped reponding to any commands except movements, and crashed when I tried to daddy save. The game is quite unstable now. Also my hands and weapon disappeared.
no hands bug?
ive tried full install and only install gamma add ons and it isnt going above 346 mods, anybody got anything i can do?
does your installation complete or it fails?
my game randomly crashes (seemingly without reason) and this is the error: anyone know what to do?
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\weapons\wpn_vssk\wpn_vssk_ac10632.ogf'.
stack trace:
it completes
imma try one last time
3rd times gotta be the charm
In case anyone else had trouble with files not downloading correctly / getting flagged mods, I turned my VPN off and re-did the install and that seemed to solve it.
Hello i may need some help but wasn't too sure where to go, i ended up getting this fatal error
depends on WHICH mods
!disabled
Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #🤖bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #🔨base-gamma-support, use #🔨modded-gamma-support instead.
Got this message after a complete deletion and reinstall
followed all the steps exactly so i don't exactly know what the issue is
assistance would be appreciated, thanks!
Anyone able to help me with Depth of Field, updated via full installation today and for some reason i just cant disable it. keeps turning back on when i exit settings
Appreciate the help
i've tried updating the modpack and everything but i'm getting the same fatal error time after time. Would be much appreciated if anyone knew anything that could help
yeah 3rd time wasnt the charm imma need some help with this one
it's from mod 269, the VSSK remodel. would suggest you manually download:
https://www.moddb.com/mods/stalker-anomaly/addons/vks-vykhlop-a-vssk-reanimation-and-remodel
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
!dof you gotta disable it via mod config menu
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
Thanks dude!
Thank you my guy!
Hey Veer, ummm... i just did a total delete and reinstall of both anomaly and gamma, i preserved the savedgames and downloads folder, but im getting a memory error...
I was wondering if there was any solution to this because i've been having problems with it since last night...
i saw... problem is there isn't usually one specific cause for a error like that
put your crash log here regardless
!move don't install your game on desktop
KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
1) Open your GAMMA folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
2) Move your GAMMA folder to the new location
3) Run the installer as admin, click on Download G.A.M.M.A. data and then on Full G.A.M.M.A. installation.
Moving Anomaly:
1) Move the Anomaly folder to the new location
2) Go to your GAMMA folder
3) Delete ModOrganizer.ini file. It should be below the ModOrganizer.exe application
4) Launch Mod Organizer (click on the ModOrganizer.exe file in the same GAMMA folder)
5) Press OK, then Browse, then select your Anomaly folder. Done.
would suggest C:\Anomaly and C:\GAMMA for your GAMMA RC3 installation
I did it a few nights ago and it worked perfectly fine?
yeah until you run into a weird permissions error just like the one you've got
but this means I have to do a full install again yes?
Hello, I'm having trouble disabling Depth of Field in my in game settings, every time I click on it, it reenables itself
Is there another way to turn it off manually like txt editor or something?
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
How do I enable the animation where my guy reaches out and grabs it when I pick stuff up or loot a body?
Do you have #📍577-mods-in-mo2 ?
Do you see any ❌ in MO2 under flags?
nah i think i fixed it, it says in the top right 357 active turns out 52 were not actually active
so i just manually activated them
are they in the right place?
!default if you want to be sure that only the correct mods are active do this (mod list part):
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
are you sure they're part of vanilla GAMMA? there's a lot of extra mods
do the mod list thing above
ill do this now
ill keep you updated
just to clarify, would I be doing the same to the mods folder in the Anomaly game folder too?
@junior moon You are a gentleman and a scholar, thank you for the help
after doing the mod list thing and returning it too 357 the error is popping up again
How unstable is warfare mode ?
search this then screenshot
also search for mcm and screenshot that
Reinstall 110- SortingPlus - RavenAscendant and 109- MCM Mod Configuration Menu - RavenAscendant in MO2
alright, gonna run it now
hey guys ive been suffering trying to get the 357 mods but it just doesnt go beyond 346 and im thinking about torching my computer
great
now to die repeatedly!
tried downloading the gamma data, and then clicking full install? i had to do that about three or four times before i got every addon.
ive done the full install 4-6 times and it hasnt changed from 346
Yikes... i'm sorry...
pain
I understand the pain... i have been trying to solve an issue since late last night... so i can relate
I think i am getting closer to the solution though
my going to strangle the machine spirts in my puter
Are you blocked from accessing Moddb.com?
"head_damage_017" any help?
nope
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
did you look?
Real quick, I also notice that my water (e.g reflections etc.) keeps flickering on and off so the water surface disappears, is it possible to fix this or just disable water effects?
realized i somehow didnt have an account
I don't care about your account... Can you access the site? that is all I wish to know
yes
ok, when you installed, did you disable your antivirus?
no but ive never had to disable my antivirus for anything
well then, a new first for you then!
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
That did the trick tyvm!
and how do i temporarily disable my antivirus?
use google
fair enough
Game just closed to desktop while moving through the wish granter, no warning, no crash message
Banned from moddb.com ?
No, it's just these 3 mods.
2 other ones fixed after I did what you said, but I have done it several more times and they are still there.
It's just these 3.
Also, is there a way to allow red dot sights/EOTech sights to work under nightvision (rather than the dot disappearing or becoming a bright blob on the screen)?
Try rightcliking them all and visiting the mod pages on moddb.com, from there download each mod and put them in \GAMMA\downloads and overwrite the files already there, then run a full install to unpack the mods
Would need a separate mod for that, so no. iirc
Oh, so that is a vanilla thing then?
Given the nature of GAMMA, I wasn't sure what was a mod addin or vanilla stuff at this point
got it
Honestly, I'm not sure what is what either
I've been crashing with this error, any idea how to fix it?
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...alygamma\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
stack trace:
!152 you gotta update Anomaly to 1.5.2
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
the anomaly game folder shouldn't have a mod folder...
Oh im dumb, sorry lol
Are these packages even real? I've been walking around for like 30 minutes and nothing, even used free cam and found nothing either
what mods make the zone look so dead?
Partners don't wear suits. how to fix it? Hello)
Read the text again, it says GHz... GIGAHertz, your RF receiver run MHz MegaHertz 
Simple Autumn Retexture No leaves
Gardener of the Zone Textures
Grulag's Dead Bushes
Autumn No Leaves LOD Fix
it does beep on 74 tho, it's just theres no package
is their a mod that takes away alot of the options in the dbug menu
[error][ 87] : The parameter is incorrect. how to fix
I would assume that installing it on my C: drive is a viable option yes?
yep, that's preferred even
Alrighty! i'll let you know what happens!
Game crashing on startup with this error
Expression : <no expression>
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 544
Description : fatal error
Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report
stack trace:
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
do 
Okay, done and loaded, thanks :)
hello, does the "Turn this on if you stutter" mod deactivates other mods? I have 337 mods active rn, I didn't realize that, but game's working fine
I've got a guy in my group but he won't fire at any loners because he's neutral with them, is there something I can do to make him shoot at anybody hostile with me?
no
seriously?
i followed the installation process but ended up with only 197 mods
Oh, I lied. Just tell him to shoot lmao.
yes, seriously.
Maybe there is a mod that makes them shoot enemies but that is a question for #1035807043933720576 or #🔨modded-gamma-support
Alright
So,I have a Solarint's JSRS v5 GAMMA Patch mod in my "Non-GAMMA Addons" category on my default (Unaltered) MO2 profile,and it's not active. What does this mod do,and should I turn it on? If so,what category does it go to?
Did you click Download GAMMA data?
do you have #📍577-mods-in-mo2 ?
Yes.
Then all is fine
how dogmatic. None of the information that's required to actually understand what this is.
It came with an update. It's a bespoke GAMMA patch. I have zero information about it,not even if it's required.
I'm not getting the Stalker Gamma Menu screen? but i have everything where it should be? please help?
Wait wait wait
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
didnt work
Do you still have 346 active mods?
yes
run another install tomorrow then, sometimes waiting fixes it, for some fucking reason.
very upsetting
Took me 3 days to install GAMMA personally
Fukkit. Gonna ask the Wizard himself.
@willow hawk
Since I'm getting a, "Do not think. Do not understand. Obey dogma." response from the people whose job here is to help people understand... An update gave me a Solarint's JSRS v5 GAMMA Patch mod in my "Non-GAMMA Addons" category in my unaltered,default GAMMA profile in MO2. I have absolutely no idea what this mod is,what it does,where it *should be,*or if I should even turn it on. I need answers for these things.
hello when i start a new game it crash in the loading
ASK IN #🔨modded-gamma-support IT IS PART OF THE NON STANDARD MODS YOU DOLT
That is entirely unknown. Since nobody seems to know what it even is.
I told you this previously
idk which part of "don't enable any mods manually for a vanilla modlist" doesn't translate...
It was miscategorized to begin with. Which means it didn't activate on its own,if it was ever supposed to.
hi, please upload your crash log here. It is the text document called xray_yourname, found inside Anomaly/appdata/logs.
Pinging Grok of all people so he can come personally explain a random mod to a random person on a server with 200k people 
I already asked several people and got shrugs,or dogmatic regurgitation.
I need information about the basics of this mod. Something that nobody but the Wizard appears to have.
bro you love it so much turn it on and see what happens... none of us care
hello thank for your reply
The issue,as I've already said; It got miscategorized,and there's no info about it. All I can glean from the singular line of information I have,its *name,*is that its a bespoke GAMMA patch.
right, enough of this. conversation over.
If you wish to continue then go to another channel
Do you have #📍577-mods-in-mo2 ?
I don't even know if it's supposed to be part of the default mods! Since nobody seems to have a definitive answer for that,I'm asking here. But all you're concerned about is an honestly very fallible number ticker!
So... i didn't get a error message thrown on this crash, but i do have the logs and it's that dolg_vin one or whatever it is
pop the whole log here
you know we love those crash logs
FATAL ERROR
[error]Expression : SG
[error]Function : CRender::model_CreateParticles
[error]File : r4.cpp
[error]Line : 683
[error]Description : Particle effect or group doesn't exist
[error]Arguments : hit_fx\effects\hit_blood_drops_hd_dust_18_extra
Funny... it's not letting me post the log?
anyone know why headhsots are crashing my game?
do you have a custom texture mod like Golden Autumn Weathers
Since running an update Depth of Field is stuck on no matter what I do in game. Is there a setting somewhere I can force it off?
drag and drop the whole file?
!dof
It's the new DOF effect. You can turn it off:
1) Open the game
2) Go in MCM Settings (press ESC - Mod Configuration Menu)
3) Search SSS Settings
4) Disable options you don't like
If DOF doesn't work even though the options in MCM are turned on, do !k98 in #🤖bot-commands.
I am?
danke
ive got a winter one on you think thats causing it
It's saying something went wrong, try again later?\
odd. well, then copy and paste the bit right after "FATAL WEATHER"
I told you that if you have #📍577-mods-in-mo2 then all is fine.
Now 
Hi does anybody know why when I go to sell any patches to Asian as a merc character my game crashes?
It COMPLETELY DELETED itself????
there's no evidence that it was ever even there now?????
Man... my Pc must be trippin of those perc-30s
Did you launch the game again, if so then it overwrites/deletes the old log
well if it throws the same message ill bve sure to send it
make sure that your mods are loaded by Priority in MO2 (click the "Priority" tab in MO2). Then, make sure your winter texture mod is loaded ABOVE "Particles Cinematic VFX"
do you see any ❌ in MO2 under flags?
nope
and you do have #📍577-mods-in-mo2 right?
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
time for another 2 day install lmao
!dependencies make sure you have DirectX and that it works properly
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
read
i'll try this, however i was literally just playing an hour ago tho
how many do you have active
@keen cedar that absolutely fixed it thank you
fucking stack trace again?!

because the dolg_whatever error i'm 99% certain is an issue with mod 29
So? deactivate? or?
stack trace error = "something caused the game to suddenly stop working while going through the files but it won't say which one"
Thank you
Hell, it references memory instead of a specific file making debugging a huge pain
if it WAS an issue with mod 29 i'd tell you to manually download and reinstall
I already did that once today 
we do see them decently often, the problem is we can't offer specific troubleshooting steps and have to refer you to the generalized "reinstall fucking everything bit by bit" procedure, because we don't know what's broken
Oh dear lord... I'd prefer not to install 357 mods... by hand... just end me right there
oh by "reinstall everything" we mean "use the installer", to be clear
Ahhh...
although shoutouts to the legend who tried to install gamma by manually downloading every single Anomaly mod on moddb
Yeah... I've done full installs 8 times since i've had it, and i've tried a complete reinstall and even moved the files to my C: drive...
that was today...
when you downloaded were there any errors or messages in the black window that opens with the installer?
but there's really people that have went through and installed literally, every. single. mod. by hand?
I didn't see any after i had gotten back from my shower, or at least from what I could recall i didn't see any
well, i'm telling you not to do that because a full half of the modpack isn't hosted on moddb so lmao
it wouldn't even work
but i am going to go eat, i will return once i've eaten...help other people... my problem as for now is unsolvable without doing that haha
Help him lol
when playing on DX10, disable the mod "282- GAMMA Loading Screens - CS Eden"
ok I did the install and everything was there, I opened the game and now it doesnt crash but he doesnt accept anything it just says "i've changed my mind" any fix?
anyone figured anything out? bc idk if it's just gonna keep doing this even after I install again
!amd did you ever try this potential fix?
If you have issues with AMD GPUs try installing the dlls of the x64 folder of the following .tar.gz to Anomaly/bin folder: https://github.com/doitsujin/dxvk/releases
If you still have issues, refer to this guide: #╭📖faq message
Imma be honest, i didn't bc i have absolutely no idea what any of that means 
You download a set of .dll files and slap them in a folder to overwrite the old ones
From the github link yes?
ye
the x64 ones, just to be sure
there will be a folder in the zip named x64 with the .dll files inside
ok
x64 is the type of program/operating system
It didn't ask me to overwrite anything, should I be concerned?
what did you do?
what files did you put where?
Uhh... extracted it into the bin folder?
open the top folder
you need to dig deep until you find the .dll files
Then put those in the bin folder
Ok... when i opened that folder all i found was a text document.
but let me check again
open it with 7 zip
the folder?
yes
i'm not seeing an option to "Open with 7zip
I did the work for you, extract this into the bin folder
Im sorry
Thank you so much, the game even runs smoother!
its fine, they made it quite hard to extract
ok, i've gotten to the .dll files
now i copy them over and overwrite them in the one folder yes?
I'm in the arena and everytime I kill someone in the match it causes my faction to go to war???
wait, it's actually already in the anomaly bin folder.
Do you have #📍577-mods-in-mo2 ?
Do you see any ❌ in MO2 ?
here i'll provide SS
to go to war? are you playing with warfare?
put those dll files in the bin folder
all of my addons are flagged and i crash on game startup
OHHHHH
I dont see any X but I only have 331 active, I have disabled some mods
well... yeah i deserved that one 
Are you blocked from accessing Moddb.com ?
bro I swear that 70yo grandpa knows more about computers than these people
I am on story mode, I thought it was possible to piss off a faction to the point of war normally
when did you last update
you wouldn't be wrong... I usually decent at some of the other things, I've just never had this many issues with things like this before... usually find adn solve the issue with my first attempt
oh yeah i see
ill wait for it
never have😭
wait for the indicated time + 30 minutes then do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
!backup
"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.
To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"
Could you maybe make the !full command tell people to disable AV also, seeing as the command is often used when an install has failed? would help me quite a bit
once all is done, i should be able to reboot it and try it so i will let you know
AV is rarely an issue
oh, guess I just get all the people with AV issues then 
tons of people in #1026866080347603065, it is the primary reason I started using my own copy paste
ok this time it didn't even load up...
Sometimes Winows Defender etc. would just snack on the mods while extracting
try with avx
or on a different DX
thank you, I will probably just deal with the issues though
are you sure you want to miss everything in #📢announcements
same message, ill try a different DX
you've missed quite alot
i'm on a 50GB limit each month so I dont want to burn it on video game downloads usually
:(
The recent updates are like 2gb total? Not sure
maybe ill do it at the end of the month
The new loading screens alone are almost 1gb iirc
Then it's 2-3gb
I'm not even getting an error message and it's just not booting up now\
You are cursed, clearly
I was at least getting an error message on DX11
And he can cancel the download of the loading screens when the installer will be trying to download it
I have a bit of a strange potential fix though. experimental at best, retarded at worst
!k98 start by doing this again to undo the dxvk stuff
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Now you take this zip and overwrite the bin folder
Should only replace the .exe files
in gamma yes
in \Anomaly\bin

