#🔨base-gamma-support
1 messages · Page 95 of 1
how am i suppose to do it
Enabled, I am pretty sure
Right click it and reinstall
do i merge, or replace?
All the .zips that were in it should be in GAMMA RC3\downloads, there should not be a folder called "GAMMA_addons_downloads" anywhere
Replace
Hey I am trying to create a new game and once i have all of my starter equipment done and try load into the game it black screens and crashes
game has been running good but my captions/subtitles aren't working
It seems YACS is only disabled from certain saves.
If I load my autosave, instead of one of the quicksaves that i, for some reason, could make
it works
i am not sure why it let me quicksave at all, but it seems I just need to load my autosave
i keep crashing could someone take a look and help with fixing it plz
its all in downloads
I have a quick question for those who knows; Is there a minimum requirement in standing with the eggheads required for me to buy the Psy helmet from Sahkarov? he's not giving me dialogues to exhaust nor any prompt to buy it from him either.
I would assume tho
alright I did the full instalation and tried again, game still crashes as soon as I try to reload
have this funny problem now: installed all mods everything good but when i launch the game it just giving me an error message wich instantly vanishes
Your file path is GAMMA RC3/GAMMA_addons_downloads/downloads when it SHOULD be
GAMMA RC3/downloads
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Hey, having trouble to get the game to even boot following looking into some of the additional mods. Log.txt attached.
I have a question, i might be a moron, but i have my echo detector in hand, but it doesn't light up. In fact, geiger counters, anomoly measurement devices and rf receivers all do nothing when held. IS there an on switch or something?
If you activated anything over the stock 334, go to #🔨modded-gamma-support
No you just need to be near an actual artifact
Oh and it needs battery
disregard my request, i restarted my computer and now its fine i guess lol
Its got battery, and am near the training grounds at the start. lookin for jellyfish
Is there a quick way to return to the stock 334 then? Should be easier to triage then.
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
Thanks for the advice!
Hi, how can i fix the shooting crash problem?
i fixed it
Ok
Any way to get companions to reasonably keep up with you?
but i still cant find groks modpack installer
The installer is in GAMMA RC3\.Grok's Modpack Installer
its like it doesnt exist
Also having the launch issue
perfect have exactly the same issue
Hello again guys! What is the parameter I need to look into to make mechanics able to repair my armor? I see they can work on weapons btu not armors?
any ideas on how to make warfare as stable as possible?
Head damage 17 requires you to copy and paste some files, lemme find it
!warfare it's just buggy
G.A.M.M.A. isn't built with Warfare in mind and Warfare, per se, have bad perfomance, bugs, issues, etc., this is why it isn't recommended.
You can play it if you really want to, but forget about #🔨base-gamma-support and #old-bugs, in these two channels the support is only for G.A.M.M.A. vanilla and are also used by Grok for bug fixing.
Since G.A.M.M.A. vanilla doesn't use Warfare, you'll need to use #🔨modded-gamma-support.
!k98 sniped lmao
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
I cant seem to launch the game 😦 did everything by the book - 334 mods etc. I pick up Loadout and start - exits by itself without error
Go read the pinned thread in #1026866080347603065 and see if that helps
A general message to everyone crashing on starting a new game if you have #📍577-mods-in-mo2
@north turret Same issue on my side, I have tried to update GAMMA data but it is already up to date. Game worked perfectly yesterday
ok, im back, i have steel ingame blackscreen issue, so i reinstall the game and it do the same. command cfg_load grading_warm say that he cannot open script file grading_warm
@keen cedar thanks the pinned thread fixed my issue
Anyone else sometime CTD when they shoot something?
Game runs now, thanks for the headsup!
Can someone help me with this bug? I've tried deleting shader cache but it only fixes my issue for like a few gameplay minutes before coming back
all the water gives off this weird textures that keep flickering
@fallow storm make sure you have 334 mods active, else run the installer again Update game data > Install Addons
Anyone knows how to activate debug mode? got some issues with items not spawning into my inventory after acquisition
Update GAMMA, see #📢announcements
@north turret what did you in your case?
Tick debug mode in the anomaly launcher then press f7 in the game
blessed be the veer, thanks!
Read the thread, it depends on what your log says
Hello, I seem to have quite a big performance hit from fires. Does anyone know what settings i can change to help with that?
@north turret check the installation problems tab, there is a pinned thread for crash when starting, you need to copy folder from Gamma dir to Anomaly dir
I had 334, but I enabled some extras, like stutter and NPCs can't see through foliage. But install was fine.
Thank you, I will try the FOV settings now. Appreciate the reply.
i tried this and i still cant open the debug menu
or do i need to launch through the anomaly launcher
Nooo you just have to update
What do you mean update?
Run installer as admin, click Download GAMMA data, click Only Install GAMMA Add-Ons
hey does anyone have subtitles working?
I installed Gamma like 2 days ago. It should be updated to latest patch.
@zinc ermine god i hope you get an answer...
welcome to gamma, grok is a madman and updates very very fast
!blackscreen
Follow this: #╭📖faq message
lmao. I will give it a go, and see if it helps.
someone know where is the folder with grading-warm.ltx in it ?
hello again
during a fresh installation... can i replace f.e. the version of "boomstick and sharpsticks" from "GAMMA_addons_downloads" (in the "downloads" folder) with the newest version from modDB? i mean before then starting the GAMMA installer
no
What mod governs the new "parts" system of the weapons?
vanilla Anomaly
so i have to update manually afterwards?
Oh, alright, thanks, I didn't remember that
no you should not update it at all. it will crash
Hey looking for help,
[SCRIPT ERROR]: ...aly/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
game keeps crashing with this when i shoot people any ideas?
update your GAMMA, see #📢announcements
ah okay, thanks 🙂
Is this a normal crash or is there something wrong I need to fix?
hey i had a question. when starting the game and selecting your starter gear, why is it not in my inventory after i start?
hello I'm currently having an issue where i was sent to hunt down a mutant found it and as soon as i shot it i got a fatal error "LUA error: ...oly/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)"
!update
actually that's unhelpful
Go update GAMMA, look at #📢announcements, there was a hotfix
@keen cedar thx
Will give it a go now, thanks bro 😉
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report
this is my fatal error
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
I am a little bit confused about the command that I have to give, according to the Error in the log
which error do you have
how can I tell 🙂
just downloaded and got 334 but when i try to start it, it loads the just closes what am i doing wrong?
error is 8 rows of text
check pinned post in #1026866080347603065
send the crash log
if you are getting that error it means you didn't do it properly. screenshot your anomaly folder and put it here
is there like a creative mode where you can spawn every item in the game etc ? thx 4 help in advance
!debug
How to enable debug mode: #╭📖faq message
thank you
redo the update... all i can tell you is that error is addressed by a 1.5.2 update 100% of the time
thanks, lets see
Im trying to create new character and when i start loading up the game and it crashes
!crash but also see the pinned post in #1026866080347603065
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Just updated and that seems to have fixed the crash on damage error, thank you so much
@keen cedar Worked a charm. Appreciate the help man.
anyone know a fix for the nights being too bright?
does deleting the shader cache do anything useful?
adjust gamma settings in basic video. I found the sweet spot between 1 or 1.1
basic video is in game?
yes
waht can i do if the game keeps crashing when i try to make a new game
thank you
when i start the game and make a new game and start it ery thing is wihte pls help me
anyone know the reason for the game being choppy when looking around the map in certain areas? I'll sometimes get choppy gameplay as if i was looking at a campfire
Hello, I couldn't find a solution anywhere. I can't loot bodies or stashes (can't open bodies or containers) after some time playing the game. Also I rarely can't reload my gun, change ammo type etc. Seems to be related to the looting. Reloading last save fixes the problem. It's kinda annoying though, having to load a save every few minutes. Does anybody have the same problem? Is there a fix? Thanks.
try turning down FOV
its not that
!crash but also see pinned post in #1026866080347603065
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
why does install require power shell script and admin rights?
!blackscreen if FOV doesn't fix
Follow this: #╭📖faq message
because that's how it's written /shrug
Someone know how to fix this? 
what file do i download for my gamma file. theres 4 diffrent options and downloading them all just from one is 5 hours
anyone know the reason for the game being choppy when looking around the map in certain areas? I'll sometimes get choppy gameplay as if i was looking at a campfire
this is what some of my water textures look like
Recently my Gamma has began to crash anytime I fire a weapon.
you only need ONE of GAMMA RC3.7z and ONE of GAMMA_addons_downloads.7z
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...maly gamma\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
stack trace:
]
update game to latest update
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Only install G.A.M.M.A. add-ons"
I have it worked fine yesterday and only now has decided to die.
Played for a good few hours.
I have problems with stuttering and already tried everything from !stutter tried different directx versiond and so on the game runs smoothly otherwise.
I've noticed that it only stutters if I move mouse and use the keyboard at the same time. moving around and using the arrow keys to look around at the same time is running smoothly. using the mouse and keyboard exclusively at a time also runs smooth...
anyone an idea ?
is there any problem with G.A.M.M.A. Bounty Squad Kill and rework? or why are they disabled ?
@keen cedar i see that now i think i know where i screwed up last night
that is why they are in a section called "disabled"
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...-1.5.1.2\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
lobby for grok to rename it "GAMMA 'Don't fucking touch this'"
update Anomaly to 1.5.2
funky
well its in the category of fixes not disabled :D
how?
what’s the difference between dx11/avx and just normal dx11?
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Extract the zip, you'll have a folder
- Open the folder
- COPY the content of this folder
- PASTE the content of this folder inside your Anomaly folder
- Overwrite everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE FOLDER IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
AVX mode offloads a lot of the work to your CPU. If you have a strong GPU, you may get better FPS by running non-AVX mode
ah okay
by strong we're talking like, 3060ti+ as far as I can tell
@keen cedar you know what might cause this? i have this happen after i deleted that one mod and did a full install
and i guess i shouldnt enable "G.A.M.M.A. Companions Rework" either?
hey, i've installed gamma and started a new game, i see the hud, the command prompts and have the audio but the actual game is black
I fixed it
I'm guessing I didn't launch anomaly when I updated it so I launched it and replaced the addon gamedata files and it works now
I am dense apologies
how to use canted sights on weapon?
I had that too, im trying to remember how i fixed it, but i think i maybe just did a complete clean re-install using 7zip instead of winRaR
Same as the underbarrel weapon key, V by default. Think that's what you mean
But also im no mod so dont trust me lmao
Why is my dude holding a pistol sideways
i'll try that
i got this straight from #╭📖faq :
-
Try to delete a folder called shaders_cache, you can find it in Anomaly\appdata.
-
Didn't work? Try this other method:
When you're in game, open the command console and type cfg_load grading_warm.
Hi. Anybody had issues with fast travel not working? I've just installed the game, enabled Visited only, allow on overweight, when wounded and during emissions, yet it doesn't appear that I can use the function
"cfg_load grading_warm" via the command console fixed it for me btw @swift gust
Disable the white area around the zones on the map and rightclick the green icon if you can't get the fast travel prompt to show up
thanks haha i just searched black screen and saw there wasn't anything relevant
how do i buy weapons and armor ??? pls help
Thanks. I always had it on for comfort. Never played the game, so didn't know. Thank 🙂
yes i do , ive done what thing says , to disable x addons
so how
It's weird, don't worry about it
in the beginning, you're so poor, you can't buy anything, you have to scavenge and build up, idk if that answers it or if you actually have a technical issue
anyone happen to have a linkie to the disc thread talking about disabling the mod that makes the game look so dead and grey?
if you've disabled the economy mods then their will be certain NPC that should show up on your PDA that will trade with you but they will be PRICY! lol
!deadzone
How to bring back the default look for the Zone: #╭📖faq message
My game has started crashing when I fire any weapon I have equipped. Never had issues until loading the game this morning. Any suggestions what to check? Last change I made was putting a PU scope on my SKS, but even when I did that yesterday, the game was fine. Issue only started today.
like armour will be around 40Kish
ATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 948
[error]Description : fatal error
[error]Arguments : Can't open section 'mag_pm_9x18_default'. Please attach [*.ini_log] file to your bug report
tyvm kind sir @brisk zinc
i just want to have the option to buy gear , i fucking hate this shitty repair system , "B-BUT REALISM!!1!! OUUHGHH!!!"
realism
It's a videogame
I know
The word you're looking for is "immersion"
how do fix
You can literally delete a single file and fix it
Were you using Mags Redux?
i turned it on and turned it off
wich one
You can't turn it off
You cant turn it off
i cannot somehow clean my gun's barrel to 100
only to 99
oh i deleted the mod
Start a new game
is that okay?
Make a new game or enable and finish playthrough
idk if you fixed it already, but you need to tick on this mod
damn i have to restart?
It’s in #╭📖faq , search for “economy” in that channel
Gamma Economy
that or just continue with mags enabled
If I got what you're talking about, that stuff is old
idk who it was that said that AVX mod uses more of the CPU and less of the GPU and since my CPU is trash, i decided to run the normal DX11 and now my fps has gone through the roof after playing for 7 hours already -_-
!vanilla
If you want to be able to buy and sell guns/armors again: #╭📖faq message
This is literally what people need to do
ive disabled that one and the bas injection whatever
That works too 
ive done that , still no work
ah yes it's fixed 🙂 i found out after doing another full install, all the mods i selected on top of the normal ones, got disabled, so i reactived them, but thanks for the reply 🙂
how do i get the mod back
Heyo,
Bit of a spam day in the support but I need help xD
I followed instructions on how to install and im ready to launch GAMMA but after clicking run and waiting through the first popup the game doesnt boot.
Any advice?
Trying to use mags redux, when i click reload it just pulls the gun down and back up doesnt reload, is this common? i disabled what was said in the tips as well before installing mags reduc
Hmm that worked for me im pretty sure check @brisk zinc's link
Also means you lose the WP/NATO dichotomy and it becomes harder to find certain scopes/silencers
Open the installer with admin rights, Download GAMMA data, Full GAMMA installation
did you delet it from the Grok's launcher? why?
💀 i did
Because people can't computer
ill just restart
i cannot get my weapon parts (barrel etc) to 100 after i clean them, is that okay? they're always 99
how to turn off the grainy rain film grain stuff?
this simply happens sometimes, not often though, just drag a magazine into the gun from your inventory manually and it should be fixed
Sorry then bro i have no idea, that worked with me, are you sure its an NPC you can trade with, i also did turn off the "Gamma no trade with random stalkers" too maybe that?
any recomendations to reduce lag?
you need to have the mags in your loadout
also ofc make sure there are mags in your loadout
ive tried trading with sidorovich
!scramble
@split plume lol yea i thought that was the problem had 3 loaded mags of the right type still didnt work
is there a way to turn the film grain off?
press Home and disable everything
then i have no idea bro sorry 😦
fine, it rounds up
the same happens when you do other actions in the middle of a reload, basically it cancels the reload and leaves you with an empty gun. i double tap R to do that to just remove a mag. i think probably you cancelled a reload at some point and it just bugged out
guess i will give muh self an ak when i find it on an npc
Heyo,
Bit of a spam day in the support but I need help xD
I followed instructions on how to install and im ready to launch GAMMA but after clicking run and waiting through the first popup the game doesnt boot.
I have all the active mods, I'm launching the game through DX11-AVX and there are no error messages, it just doesnt launch the game after popup.
Any advice? PLS
My game has started crashing when I fire any weapon I have equipped. Never had issues until loading the game this morning. Any suggestions what to check? Last change I made was putting a PU scope on my SKS, but even when I did that yesterday, the game was fine while I played for another couple hours. Issue only started today.
dirty barrel in it's name always bothers me, that's why i'm asking
functional is great for the zone lol
did you update to the latest version? there was a hotfix for this
!crash post crashlog here pls
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
so means i'm not going to get "functional barrel" after i clean it? it still will be on 99 percent
uuuuuhm what?! any suggestions?
that's a functional barrel... you sure you're cleaning the barrel and not the whole gun?
This one?
100 % sure
right mouse button
maintain parts
clean barrel
still leaves it with 99 percent durability
thats on me?
No i also have a problem hah
seems like it was related to russian translation
switching back to eng changed it's from "dirty barrel" to "functional"
stuttering even with the "no stutter" mod activated... Don't know what to do
upgrade pc? soz
I think my pc is already strong enough
cleared shader cash manualy?
There are only .bkp and .log files, I sent the .log here. Is this any use? 🥹
how can I do this?
Anomaly/appdata/ - delete shadercache folder
I will try it, thanks
good luck
welp i think my fix is not heaadshotin people. fk.
same problem as above, I am reinstalling from scratch but I doubt it would work...
we want the log file
My character dislocates his thumb whenever weapon tilt animation happens
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
@keen cedar well i shoot people in the head. thats what i do. but the game refuses. maybe i shot them in the knee
my game does this every 30min to 2hr but it crashes and amd says my drivers timeout. I did the shader cache folder fix, sometimes when it crashes it wont play any sound even if i relaunch MO2
!bas
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0 - Extract what you downloaded, and copy the "gamedata" folder.
- Go to
GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addonsand create a new folder exactly named76- Boomsticks and Sharpsticks - Mich - Paste the gamedata folder inside.
- Go to
GAMMA RC3/modsand delete76- Boomsticks and Sharpsticks - Mich. - Launch the gamma installer and press "update gamma data" and then "only install gamma addons".
- If your issue isn't fixed, press "update gamma data" and "full install" in the installer.
I LOVE YOU ❤️
did u press POS1 for shader overlay? maybe u uncheck all and try again
oh somehow my game decided to run... no explanation
this error something to worry about?
I had to reinstall atop of the already installed , then Gamma full install and now is ok
Ahh, I had left my Discord on the "announcements" channel and didn't notice the newest message changed. Thanks for pointing that out. Just updated and works now.
everything turned off, still flickering 😐
no, ignore
anyone else having issues with the "Portable Workshop" i have it placed down. And it was working a while ago. Now it is not?
Headlamp doesnt go on anyone?
I cannot access my stash nor the workshop part itself.
Ahhh i fixed it, you just need to exit and reload the save.
@keen cedar
the whole log pls
Encountering a bug that has the game crash when closing a looting screen, usually its a body. No containers yet. Not sure what's causing it. Maybe Its bc im dissembling stuff before its in my pack? Anyone else getting this one?
what is the equivalent of wastelander armor for mercs? do you know which faction armor could i get if i try to trade wastlander with mercs?
dont want to make u angry, not sure if u got it
excellent now i can forward this to the person who understands logs
@shadow sapphire crash on shooting a stalker, presumably
is their a mod that makes my meds have multiple uses?
Alright I need some help I have an anomaly working but I can’t figure out the gamma install
theirs a guide
#📢announcements I cant remember. How am I supposed to update?
Yeah I followed it but when I get to the mo2 button it doesn’t show me an error or anything to browse for the file
I know I have to open some sorta launcher but its not MO2
could somone take a look at my log?
ive never encountered that issue before
do you have #📍577-mods-in-mo2 ?
BAS didn't install properly
haven't you had this error like
four times now
I just need some help I’ve been trying this since last night I’m new to stalker and the computer stuff so I’m really stuff and no I can’t even get that to show up in the folder
feels like it
wheel don't know what to do this water flickering in great swamps really breaks the immersion 😐
well you know the fix by now... there isn't another one
Stuck
Hey guys, can I somehow disable some of the mods? I don't really like the eft sounds and voicelines, and I'd like to turn it off somehow, but if I uncheck it in MO2 it still plays those sounds
hey guys, how can i increase fps in game?
Looks like something with the ssr
right so when i delete the 76- Boomsticks and Sharpsticks - Mich folder in GAMMA/Mods then ''Only install GAMMA add-ons'' it reinstalls 76- Boomsticks and Sharpsticks - Mich back in GAMMA/mods
because it's supposed to
how to make the game look beautiful? vanilla anomaly looks way better, is there a mod responsible for vegetation?
i want my gamma to look like this:
Any chance I could have someone walk me through what I’m doing
Check out the Reshade Section and do a search for CS Eden Reshade 
should this look like this?
Well somehow you can trade to NPC by just talk to them and press X
But reshade adds color, contrast and all that shit. What im referring to is that gamma looks blank when it comes to vegetation
I can link you to a YouTube Video that was posted recently does a good job of a installation tutorial.
hey guys how do i reset my gamma reshade to default
Try #╭📖faq message
Probably the one I’ve been watching
Yeah normal NPC can do this
hey hey folks! I have a weapon repair question. It used to be that it was possible to maintain parts for free if the state of the part is above 90%. Is it still possible?
That Reshade shows you the steps to disable the mods that make the Zone more dead like that’s why I said it 🙂
should the file ''76- Boomsticks and Sharpsticks New (keep disabled) - Mich'' be in GAMMA/Mods?
notice the difference?
Good evening.
Game performance is tragic in highly populated areas such as Rostok or Dead City.
But runs like butter on Cordon and Vehicle graveyard.
Should I try to find how to disable background A-Life or ammount of NPCs
ok ill try this
you can keep it. it stays disabled (hence the name) so it won't change anything
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0 - Extract what you downloaded, and copy the "gamedata" folder.
- Go to
GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addonsand create a new folder exactly named76- Boomsticks and Sharpsticks - Mich - Paste the gamedata folder inside.
- Go to
GAMMA RC3/modsand delete76- Boomsticks and Sharpsticks - Mich. - Launch the gamma installer and press "update gamma data" and then "only install gamma addons".
- If your issue isn't fixed, press "update gamma data" and "full install" in the installer.
Try lowering the stalker population factor
also, can we fix the barrel that's at 66%?
I was trying to fix the water flickring and now i've messed with my g.a.m.m.a reshade config, is there anyway to reset?
yes, ramrod
Weapon cleaning kit can restore parts as long as its >60
I can’t get this
I have a bug:
In a psy field I get a black screen hear a shot and I am dead.
Whats happening?
stood too close to Controller, he killed you lol
get out of LOS of the fucker
a file? This thing?
I was in a room, there wasnt one afaik.
I the black screen intended?
no, the item called a ramrod
Did you know you can have the latest bas update and run in gamma smoothlyM
ok, thanks
There's probably a psy-field anomaly near where you are
if you want to walk them through that take it to #🔨modded-gamma-support
Yes.
Is this the cause for the blackscreen or is this a bug?
Well i do have it rn
yes and it's not in default modlist, so support for that goes there
can I get a barrel out of a gun without destroying the gun?
that's what happens when you max out on psy damage. you headshot yourself.
Weapon cleaning kit
well, you lose all your psy-health and you, well, shoot yourself in the head
thanks, I'll try
Use the appropriate cleaning kit btw, hover your mouse to the weapon to check if ita compatible
I'm sorry to ask again. Is it supposed to be a blackscreen when I get suicided by the psyfield?
Or is my game bugged?
the cleaning kit won't remove the barrel
I just want to say thank you to all the modders, admins and moderators of this channel, finally i could install and run stalker gamma without errors so far thanks to your support. Thank you guys, you are awesome.
It doesnt, but it can maintain the barrel to fully repaired
Yes, it's like you losing your concience
oh, I see. Thanks!
Thankyou. This felt like I bug so I wanted to be sure it isn't 🙂
game keeps closing when i want to start a new game anyone knows why? was working fine yesterday 😦
No problem, enjoy!
can we maintain parts for free?
Is there a way to see how much psydamage you took?
The psybar didn't move at all
!default follow instructions for Keybind, it also resets all settings including reshade
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
That if you craft the appropriate cleaning kit and as long as the parts is above 60% yes
Can't figure out what's wrong with these mods
I'm not sure, but as far as I know, if you keep seeing psy-ghosts of creatures, that means your psy health is low
the cleaning kit will be used tho. Is there a way to avoid using it. Like maybe if the part is above 90% ?
You cant
it used to be free if a part was 90%+ I think. Well, crap
hi guys, the "jump to this quest on the map"-function of my PDA stopped working, any way to fix this?
game keeps closing when trying to start new game, already made the files to be exempt from bitdefender 😦
why does my game lag when I look at a campfire?
Sorry took me a bit to find it this is what I did so my game felt less Dead.
Got it! Thanks
Good evening to all, freshly arrived on the modpack, I use mag redux, but I realize that I can not check the number of cartridges present in my charger, however the mode in question and the recommended handling was carried out correctly on my side, is it that some have the same worries?
!mags
In order to properly enable Mags Redux:
- Enable
Mags Redux (Disable G.A.M.M.A. Unjam Reload)(the mod under "Optional") - Disable
G.A.M.M.A. Unjam Reload on the same key(yes it's a mod, no it isn't a keybind) - Enable
Ammo Check(this is a mod as well) - While in game, check your keybinds for reload and unjam
- After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus) You can also enableMags Buyable at Tradersif you want, it's a mod already inside your mod list
KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file. The only safe way to do so, is by loading a save where you don't have the mod enabled or by starting a new game WITHOUT Mags Redux.
Please :)
I followed the instructions well and the whole thing works except for the check in the mags ^^'
If you have issues with the game freezing at random times forcing you to use the task manager to exit, disabling dynamic music seems to have fixed the issue for myself! :)
wow, thanks lol.
cant open mo2 anybody got a fix?
shift-F
oops, my bad
game still crashes when starting a new game, got 344 mods on
thanks for the help
Hey guys I can’t get power supplies for exosuits to work. I bought from trader, and have spawned every type of PSU, crafted one, and all of them have 0 power. Any suggestions?
You forgot the battery part
Hi Stalkers! Is there any "vegetation mod" that is possible to use?
The Ammo Check do basically what you want, check magazines
It doesn't tell you the exact number
!deadzone
How to bring back the default look for the Zone: #╭📖faq message
Thank you, first time.
Indeed, and it is active, on a new backup
If you want immersive stuff you can't have a precise number on the screen

Gotta use your head for that
Note that you need a lot of money for those battery so be careful with the exo
All the boxes i check in the game are empty, is it normal?
Go in #🤖bot-commands and type !stash
.
Sure, but the basic operation of Mags Redux is to display info like, "There's about half the magazine left" in this case nothing is launched with the check button
could someone check these please?
I don't know how Mags works because I don't use the mod myself but for now you're literally the only one with the problem
I've used that command for months, never had a problem
Are you sure you're doing everything right?
double check the keybind for Ammo Check in MCM too
!bas
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0 - Extract what you downloaded, and copy the "gamedata" folder.
- Go to
GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addonsand create a new folder exactly named76- Boomsticks and Sharpsticks - Mich - Paste the gamedata folder inside.
- Go to
GAMMA RC3/modsand delete76- Boomsticks and Sharpsticks - Mich. - Launch the gamma installer and press "update gamma data" and then "only install gamma addons".
- If your issue isn't fixed, press "update gamma data" and "full install" in the installer.
by default i think it's Shift + F but the way it detects that can be a bit weird
look so This isnt happening i cannot get this mod to function at all. The install directions are very bleak and theres too much to download although i download and intalled the rc3 one got the installer and i put them in the same folder as the base anomaly. Now from the mod launcher it wont launch got a lotta of lightning bolts which i can tell means too many mods so i clear them put one mod on and then try to start the game and i get a error for AR gun sound thats not even on so plz help me im begging lol
Indeed I am sure of it, for the fact that I generally manage better than the average to follow the installation instructions
How to say "skill issue" to the 99% of the server without saying it

Is it just rc3 or rc 3.2?
thanks Stalker, I will let you cigars in the anomaly train at Great Swamps
its rc3 the latest
Use #🤖bot-commands to learn what a command do
woops my bad
As a moderator on this discord, are you apart of the Support/help team? Does that automatically become your responsibility once you become a moderator here?
there isnt rc3.2
huge difference
Use #🤖bot-commands to learn what a command do pls
I literally become a moderator because I've helped people in the past
That's why I'm a moderator, to give power to my words
Because if a moderator tells you to "do this and the game will work" you trust the guy
shot crash. bored as hell. and please, do not tell me go to #📢announcements and get update. Already. few times. nothing help. in mo2 disabled only few shaders.
game still crashes 😦 idk what to do now
Yeah i can launch the base games but i only see the two red icons and no theme or anything
After checking a found PDA and going back to mine, I can't interact with the buttons (Messages, etc, at the top of the PDA disappear). Is this a known bug and is there a way to stop it from happening?
Did you askm
Gotcha, that wasn't meant as a rude statement so hopefully it didn't come off that way. I was just genuinely curious if there was a helpdesk/support tag that I wasn't seeing or if moderators were the ones to go to if we found issues that we couldn't find solutions to through the support channel or support channel bot.
when i use the gamma profile its too overloaded and says head error or something
noe one an idea ? I can only use mouse OR keyboard at once this problem doesnt appear with other instances of anomaly
when i try to launch with the mod menu
sorry brother. i followed the steps and im still having the same issue of my gun not reloading when pressing R. ive loaded the mags and equiped them on myself so they show up on the bottom right, yet when pressing R my character wont load them
Dunno whats going on need help pls
@potent summit
Dod you use the latest installer?
The whole point is to use those pre selected mods
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
yes those are there already
anyone know why my game keeps crashing when entering the garbage zone? sometimes it crashed right after loading in, sometimes it i can walk around a couple minutes before crashing
Dont post bot command here
The install directions are pretty straightforward don’t fuck with anything in mo till the game is running stable
He's helping the dude
A thing is help someone out
Another is "let me use this command because I don't know what it does"
Can't open section 'head_damage_017' from your log file in 99.9% of cases means you didn't replace the files correctly.
Shit sorry then
He needs to do the patch
anyone know why when i launch Gamma it starts fine but when i click to start the game in the UI it just crashes and never loads
How does faction relations work in this game? Can I shoot these two pacifists dead and run for the hills and be fine?
@graceful vessel thanks mate
Man wtf
Ah I was replying to the wrong guy. Sorry.
You did well to specify that because I thought you were going to say something like "you shouldn't address users like that!!! You're a moderator!!!", unfortunately I got to the point of reading stuff like "how do you extract a file", so... telling people that they have a skill issue is THE LEAST I can do, I'm really starting to not care at this point
I can understand the problem when it comes to a crash log, but when you're not capable of following "paste this folder in that folder"... that's my limit
Since this is a server for a mod pack, you could say that helping people is my "responsibility", nobody is forcing me to do anything obviously and I've already contributed 100000% with all those bot commands and the 90% of #╭📖faq + all the help I give almost daily
It's really up to people TO LEARN HOW TO READ, that's the major problem, people don't read
We still have people asking for support in fucking #old-feedback-suggestions channel
We don't have a helpdesk/support tag but this channel is literally the place where every question and bug goes, this is because at first we had two channels, one for questions and the other for bugs
Since both channel were used for the same thing, we decided to unclog the server and made just one channel
It's a literal hell but heh
I’ve had the game installed and playable since 9/21 is there a way to simply update the game still like previously to get all new content? Or am I going to have to reinstall everything from scratch with new installer
Yes as long as you dont met with the companion and the area isnt full of the group of stalker you just killed
Everyone is like just follow the how to install and I have a folder with all the modpack in the anomaly folder so i dont know why its not working
Hey chaps. I just had a couple of CTDs. One happened while I was chilling on my PDA in Rostok, after a few hours of playing. The other one just happened now when I was running in Rostok, after playing for like 10 minutes. I don't see any crash log in the GAMMA folder tho
Game had been quite stable until now
Gotcha thanks
The group i meant is the faction, learn it the hard way
how do I activate the nvg function on my scope?
Yes
Hold n, scope will auto use it
Search !k98 and do what’s in the bot message
@near vector try this
holding n doesn't do anything, can I not activate it during the day?
Do you have the nvg?
I said nvg scope
Its M for nv on scopes iirc
yup it was M ty
ghstking already had those in there by default when i moved the folder into anomaly
Understood! Thank you for clarifying!
You copy and paste then replace
Can the game be updated using the old launcher method still?
i activated Knot devil artefact, nothing changed, what exactly it should have done to me?
Hi guys I have little problem. I am slowly taking damage. I tried anti radiation, bleedeing, all the stuff. I even tried medic in swamps and still taking damage. I dont have artefact in inventory olso my stamina goes down very fast but i am not overloadet.
Hello, good afternoon, could you help me with this problem?, when i start a game. the game turns in a black screen
i had the same issue @versed umbra i just fully re downloaded it
You just activate the strongest artifact in the game, gives you bunch of significant buffs, bit you need to sacrifice other artifact to sustain or you will die if knot runs out of power
The anomaly and gamma whole?
@versed umbra yee
Type !blackscreen at #🤖bot-commands
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Well, thank you @potent summit and @runic stone
screenshot directory where >
Is there a crash in here?
Anybody know what this means?
Thats what i am dealing with
anomaly folder\appdata\screenshots or GAMMA RC3\overwrite\bin
Nice! Glad I was able to help I would try the Aggressors Reshade or the Eden’s Reshade to my understanding it changes some the textures of the grass and trees.
Ye. Already done that. What u see in screenshot is with Eden
Nice!!
Im giving up this mod is terrible. been trying to get it to work for the last week and no one will help. The how to install screen is vague as fuck
so im out i gave it hell and i think this whole server is ridiculous
is installer version supposed to be 3.8 or 3.7
@near vector have you checked the step-by-step video from youtube? It shows exactly what to do in there etc.
Is there an easy way to see if someone is hostile? Haven't really learned to tell factions apart
yeah i followed a tutorial on youtube and did everything it says. so im at a loss here.
3.8
nope, you gotta learn the faction patches
i mean the "easy" way is when they start shooting at you
where can i get the new ver?
hi, i see that is new ver 3.7 i can just update from 3.2 to 3.7 or i must download 3.7 and make new instalation?
im on 3.7 now
Ran up to hug someone and he shot me in the head =/
I may come back if it ends up being install friendly and less confusing but i doubt it ever will.
It is terrifying to see that from one country to another the problem remains the same: People do not read
Nah its not that its comprehending what the fuck we are reading
Anybody know what this means?
@near vector do you crash when you startup or when?
and do you have the right amount of mods showing in MO2?
is there a new download link somwhere i didnt see
yea i get an error like hobbit toes
!38
- Grab the latest installer: #📢announcements message
- Open your GAMMA folder
- Open
.Grok's Modpack Installer, it's a folder inside your GAMMA folder - Paste the installer called
G.A.M.M.A. Installer.exein here and overwrite - Launch it with admin rights
- Click on Download GAMMA data
- Click on Full GAMMA installation
- If you already did two Full GAMMA installation, wait at least one hour or you'll be blocked
PLEASE KEEP IN MIND THAT MODDB IS FULL AT THE MOMENT, MORE FULL INSTALL ARE REQUIRED.
error with the BAS patch
and yes theres a ton of mods and lightning bolts if all are checked
Is there a channel in english to just report a bug I've found that I don't needs "support" on?
!stutter
- Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on
Update G.A.M.M.A. dataand thenFull G.A.M.M.A. installation) - Bring your modlist back to default (type
!defaultin #🤖bot-commands) - Enable the "
Turn this on if you stutter" mod in your MO2 (you can found the mod under theG.A.M.M.A. Fixesseparator) - If you have a NVIDIA GPU, you can enable
Triple Bufferingin NVIDIA control panel - Open Anomaly Launcher via MO2 and tick
Prefetch sounds - If you have a beefy GPU, use
Anomaly (DX11)
redo? !BAS?
Or should I do that in the github
@idle nova
trying something new. Go to GAMMA rc3\mods\76- BAS patch 28-12-21 (2nd 76) - Mich then delete everything inside. Then,
Run the GAMMA installer as admin.
Click the "Download GAMMA Data" button.
Click the "Only download GAMMA add-ons" button
@near vector if you have 334 active mods and crash on startup. 1) Find and read your error log. It is in Anomaly/appdata/logs, and is called xray_yourname.log. Open it in any text editor, such as Notepad.
2) Go to the very end. You should see a section that says FATAL ERROR. Read what it says after that.
So, im encountering a crash that consistently happens after a while playing the game. The game freezes and audio bugs out, PC gets completely locked requiring a restart. Logs just end at LSS spawning object
Hallo, just wanted to ask if there's an ETA on the next update that will be compatible with the latest BaS?
Wait for announcment
Obvio. Just a shame there isn't at lest an approximate date.
#🔨modded-gamma-support ask here
For using the latest bas
got the error again
any chance could i get the file that im missing and plant it where i need it?
just thinking out loud
just quick question , how long does this mod installs ? its already 1h + for me and still not finished is that normal ?
Ahah I'm out I think the directions are confusing I will fight the moderator if I have to
Well normally its 30 min - 1hr but its longer thanks to certain somebody
how to toggle lasers on my weapon?
I think if you struggle to install it, you will struggle to play it, so yes, better forget about it man )
bro wat?
go to #│💻keybinds-in-gamma
Reffering to @near vector
oh
Crashlog?
It's the never ending problem of believing that a mod pack is like a Steam game, you press "install" and you're done
forgot how to check that, mind telling me real quick?
oh its just logs right?
Hello! anyone knows why my sks won't work with Mags Redux?
Working in a helpdesk center I totally sympathize
Ye
should I dm you the whole file?
Lets try
My game keeps crashing while im in army warehouse
Hello, I did the fix that was posted about BaS but after that it says Can't find model file
'dynamics\weapons\wpn_pl15_tan\wpn_pl15_tan_world.ogf'.
and the game crashes
Which I am guessing its from the newer versions of BaS
Yup. It's the guide. @knotty summit basically there is a rare bug right now where killing important npcs can. Cause a crash. You can kill them with console. Don't loot them, or you can keel trying but I would change maps a couple times first. For some reason the xray engine just loses track of them. It's currently being investigated.
@shadow sapphire Thanks mate, i just headshot him in the knee, that worked out. i keep that in mind

Lol nice. Yeah I don't know what's happening with that yet, but we will figure it out 🙂 thank you for being understanding!
"Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report" What did i do wrong T_T
a free game thats better than a triple A title with a great comunity?`why should i ever complain mate, keep up the good work lov it
Did u also kill someone important? 
No ! I'm was not being able to even launch the game for now 🥲
how many activ mods?
334
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
I'll try this, thanks

@willow hawk Is the .Grok's Modpack Installer open source? I can see its a .net assembly but its been obfuscated using SmartAssembly, why? Its just kinda sketchy that you ask to disable antivirus, enable powershell scripts and run it as admin. I'd like to look at the src to verify its not doing anything to my system that I am not authorizing. I can investigate further and decompile/reverse engineer, but I thought I'd ask for the src first and save me some time.
have some trust 
yeah... no
its a free thing, u just could play anomly only. no worries there
This .. again. If you don't trust it dont use the modpack 
It worked ! Thanks my friend

Were you able to play?
Does anyone know what bot command i use for this fatal error?
DX9 doesnt work
No. It doesn't XD. That's stated in many places. 11, 10, or 8
thanks bro
so my game crashes erverytime I try and shoot something, but I had fixed it before and now it has reappeared and I cant remember what I had to do to fix it
ah well my stupidity, i just dragged the addons from 7zip and when it threw error it didnt copied them , so after doing normal extraction theres bunch of mods now and the instalation goes faster
Run installer as admin -> update gamma data -> only install gamma addons we patched that bug
Maiby me dummy, but If I press spam J or entf (the button I set it to) companions dont teleport. They are from quests, if that makes a difference
so my game gets choppy when looking at campfires. anyone know a fix
alrighty, thanks for that
Level transfers aren't working for me. I'm attempting to go to the garbage from cordon. When I try to leave through the backdoor the screen will fade to black but nothing happens
When I try to upgrade the mauser 98k forester with one of the basic kits (reliability upgrade, using weapon mechanism upgrade kit), it uses the kit but the upgrade doesn't end up being installed. Is this a known issue?
Hey guys, why is my game so grainy looking
attempt to run further. The game forces a teleport once you reach a certain distance out of level
Are you finishing it? I've never upgraded something at a bench but with repairing you need to click a button to finish it
is there a setting or a shader preset I can tweak with?
It's an invisible wall
I often use the PDa glitch to avoid the black screen loading screen as enemies can still shoot and the force tp is faster
I disabled the mod and it still fails as well
Back off from the level transition, save, then reload that save
I did
Weird. Sorry that I never encountered. I usally hit that wall and it throws me out of the level. If the standard anomaly dont even work then reinstall that first maiby
and put 1.5.2 over it
You mean reinstall the whole game?
Save, exit the game, start the game, and load the save
yeah, and it works with every other weapon and armor I have, upgrading using basic and advanced workbench\
I did that too
you said even the standard anomaly doesnt work?
A couple times actually
Yeah, but I think it might be a problem with the mods because I disabled a few
If the clean vanilla doesnt work reinstall that. And make sure 1.5.2 is over it too. Does the Gamma mod work for level transaction?
I didn't go full vanilla, I just disabled the mod that added smooth level transitions
tried a new save with the new modlist? Just to see if that changes
Btw anyone in here knows on qick info if "disable burnt fuzz" doesnt work with body health system? Applying that doesnt seem to fix the stupid moss that instant kills you in a exo even
I'll check it out then get back to you
I cant seem to find what is causing theses weird black no textures
How do i fix this
umm does these coool awesome laser atachment pro noscope flashlights work on guns or just for cosmetics?
my game keeps crashing when i'm in the middle of the conversation with rogue in the questline. How do I solve it?
Work for noscopes
ive got a problem like this, were you trying to do the fps fixing stuff?
Yeah, I changed to DX10 and game started doing this
i disabled all those shaders in the guide and i ended up with the same results
Hey guys anyone knows how to fix this?
The problem is getting worse by the way
have just finished the installation and i have no gamma desktop icon?
😐
make yourself one
i lied it put it on my second monitor 😂
also what mad brain set the "quick grenade button" next to the use or talk button....one slip in a dark night and isntead of telling the dutyer that you got a package for him you throw a frag nade at him XD
not that this....would happen to me....
anybody have any idea why i am capped at about 45-50fps? im running a 3080ti and 10700k, the fps limiter on the settings is at 0....
my game keeps crashing when i'm in the middle of the conversation with rogue in the questline. How do I solve it?
Where are you
any idea how to fix that?
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'actors\stalker_nebo\stalker_nebo_3_steel_helm_gp5_2.ogf'.
gamma crashed as soon as i change my resolution to 2560x1440? any idea why?
can anyone show me how to install gamma? im fucking stupid and idk what to do
Gamma keeps crashing when i'm in the middle of the conversation with rogue in the questline. How do I solve it?
worked this time nvm
!Crash send a crashlog here.
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
any idea how to fix that?
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'actors\stalker_nebo\stalker_nebo_3_steel_helm_gp5_2.ogf'.
I don't know where to search it
Where you installed Anomaly... Anomaly/appdata/logs
thanks man
FATAL ERROR
[error]Expression : !phrase_dialog->m_PhraseVector.empty()
[error]Function : CPhraseDialog::SayPhrase
[error]File : PhraseDialog.cpp
[error]Line : 151
[error]Description : No available phrase to say, dialog[stalker_rogue_living_legend_start]
can anyone show me how to install gamma? im fucking stupid and idk what to do
Can't show you but the #old-how-to-install is a pretty complete guide. If there is something in there specifically you don't understand mention what that thing is.
where it says mirror like this do i have to install everything there?
Chose one mirror for each step. Only reason there are multiple is in case one of the download mirrors is overloaded.
ohhh
FATAL ERROR
[error]Expression : !phrase_dialog->m_PhraseVector.empty()
[error]Function : CPhraseDialog::SayPhrase
[error]File : PhraseDialog.cpp
[error]Line : 151
[error]Description : No available phrase to say, dialog[stalker_rogue_living_legend_start]
Hey guys, I think I need some assistance. I just downloaded the game but for some reason, having the AA set to a lower value than 8x causes everything to be black. It does not occur when setting it to 8x but then that tanks my fps quite a bit and I cant get past 60. Any ideas please?
hey you. i managed to get my game to look like a game again. try reverting back to dx11 and reenable the shader mods that the guide told you to disable
Alright, i'll try it, thanks
Not sure. A helper can probably help, but none on right now it seems.
Hey y'all, can someone help me? My game was workin fine and today, when trying to start I'm getting this error on MO2. FOund out that those 3 corrupted folders are from boomsticks and sharpsticks, but the problem is that the mod is too large and I can only download at around 200kb/s from moddb for some reason. Could someone send those three folders for me to replace it manually so I don't have to download the whole thing again?
so where am i supposed to send my xray file i have a crash its sometihn to do with a life and memory
last dawn search for the missing scout mission, cant for the life of me find this guy, anyone know where he is?
I can move, shoot and hear things but can't see anything, I can see all UI elements but my guy Is permanently blind I have not touched a single thing except for removing 2 fast travel mods and enabling the stutter fixer how ever I was able to still see after disabling them, I have no clue what caused this and loading previous saves and new games does nothing to fix this and as far as I know no one has found a fix, Is any one able to help
Heeeeelp
Expression : <no expression>
Function : CModelPool::Instance_Load
File : ..\xrRender\ModelPool.cpp
Line : 120
Description : fatal error
Arguments : Can't find model file 'actors\stalker_nebo\stalker_nebo_3_steel_helm_gp5_2.ogf'.
If you don't use default modlist go to #🔨modded-gamma-support
Any idea how to fix this guys? Seems to occur whenever I set the Anti-Aliasing to a lower value than 8x:
I haven't added mods either and again removing mods was not the reason It broke
You might have just helped me so much
uh so I start new game , I get to play for like 1-2 seconds then the game goes into windows with audio like some error popping up but nothing happens and then my whole PC freezes
It is most likely a shader issue. Try !shader command in #🤖bot-commands
it does not really help as in my case, my pc apparently cant handle 8x AA and so its either 50 fps rn or playing in this darkness at a high framerate
is there like nothing that can be done? I have tried all the framerate fixes that Grok has provided, turning off the shader add-ons and doing all the other fixes as well, still, I cant get the game to be smooth.
It is only smooth when its pitch black like this
I love you beyond belief my AA was off for some reason putting It on 8X helped I hope you get yours to work love you man
Can you post the full log file.
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...mma/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
stack trace:
any reason my limbs/health is fully red and i cant pull my guns out? its happened twice but ive had to reload prior saves to fix it
Did you update to version 1.5.2?
Yea
I can play the game
Does anyone know what the normal hud fov and what the normal mouse sensitivity is as mine has got completely messed up
Does it happen when you fire a weapon?
I was about to shoot at a dog and boom crash
but I can fire at anytime I want
update game to latest update
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Only install G.A.M.M.A. add-ons"
See this from helper earlier #🔨base-gamma-support message
So I killed a guy who had an artifact. When I loot him, the artifact's condition is 100% while in his inventory but it drops to 19% the moment I grab it. Is this a UI bug or am I doing something wrong here?
Yeah that’s just a bug i believe
I killed all the military but the mission is still active :/
Alright, I figured that finding a pristine artifact in the wild was too good to be true so I wanted to be sure lmao
hi could someone guide me to where to go exactly if i want to change the main menu background?
Didn't work
How am I supposed to get armor in this modpack? The best armor by quality I've found was at 25% quality and the best repair kit I've seen needs the item to be at least 65%
id recommend using mcm settings for that
Did you read the Guide in the PDA on armor repairing and economy?
Look who's back, back again.
You replace the parts on the armor, it will naturally make it higher quality.
you need to disassemble other armors, and use their parts to repair the one you want, then you can use repair kits.
im crashing on starting a new game whree do i need to post my logs and which ones
read it now, seems like I need to find a specific kit
You get can armor from quest rewards (usually quest chains from my experience) here and there, but you can also repair armor if you have the right fabrics and replace the old pieces. There's a guide in the PDA/on that discord that explains it
!crash post it here
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
I'm 30+ hours into the modpack and I've yet to do a single main quest since it requires for me to go to a highly irradiated area where even vodka doesn't save me.
But who sells those armor repair kits? Do I need to find the expert tools and hope that lvl 4 gun part trader sells them?
What do I do if once I download gamma I don’t get the shortcut to the mod list thing
I think mechanics sell some if you have good rep with their faction. Your best bet is to do random jobs here and there. I don't know where you started but I'm surprised you can't do any "main quest" right from the start. I was able to get an armor from clear skies by doing a few quests in the great swamp, which is my starting area.
For desktop?
Yes
Make your own shortcut.
From step 11 on #old-how-to-install
Can’t find the icon? Simply create a shortcut of C:\GAMMA RC3\modorganizer.exe, then paste it on your desktop.
Go to your gamma folder and right click on mo2 and hit create shortcut
I’m not seeing mo2
You don't have modorganizer.exe in your gamma folder?
I see mod maker but no I don’t see that
Could be antivirus swallowed it.
Should look like this:
Yea what do I do about that I don’t have it
I think the crash on shooting bug is back
Do you still have your gamma zip download?
What do you mean back? Did you update to newest?
Just did. May have been a fluke though, let me see if I can reproduce
I'm extracting the "GAMMA_addons_downloads" using 7zip for the second time, but still getting this "Data error" with these 12 files, am I doing something wrong?
Would it help if I show you how to do it through screen share
my game crashes when arriving at pump station to defend it for a mission. Im having error 8 not enough memory and once the log had an error with alife just above error 8 but it doesnt show up anymore can anyone help?
is anyone looking at my logs to see why im crashing on new game start?
Hello, I got a fatal error, happening consistently, every few minutes. I'm currently travelling through Darkscape.
in the log:
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\vehicles\veh_zaz968\part\veh_zaz968_u_01_part0.ogf'.
stack trace:
That’s Normal
Thanks, I will continue the installation then
Good luck
Any idea why my game crashes when i want to start a new game? I just installed gamma for the first time.
I'm trying to complete the "clear out military in machine yard(clear sky) quest" with the debug menu but I can't find the quest's ID in the files, neither in the Anomaly unpacked db0 ones, nor in the Gamma xml file. Does anyone know where it is?
#🔨base-gamma-support message - can someone confirm this is correct version
can anyone tell me why im crashing on new game start ?
FATAL ERROR
[error]Expression : id<LL_BoneCount()
[error]Function : CKinematics::Bone_GetAnimPos
[error]File : ..\xrRender\SkeletonRigid.cpp
[error]Line : 175
[error]Description : assertion failed
how is the daddy issues save mod called?
yes
How do you change replacement parts in armor?
You need a basic tool kit and a the right amour kit
No idea. I can see two other people had similar problem but no resolution. Might have to wait for a helper. Is this a fresh install?
just spent the last hour reinstalling everything even with the 3.8 installer, done everything right and game still crashes when starting a new game, guess its GG for me with gamma 😦
Yacs ( yet another campfire save)
yes fresh install
Can you send an image of your MO2 client.
so i managed to get in after reseting the settings to default but now my view is mega fucked ill post a screenshot of both
change FOV.
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Yeah, change your fov, probably will help.
yeet fov did it thanks
need some help here lads, what is the "swamp road"?
Fov standard is I believe fov 80 hud fov is 6.8
how to fix this ?
i now dont know what graphics setting i've changed that wouldnt let me boot now buut im sure ill find it 😂
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
weird question. When sprinting its almost like I hear someone running behind me in my right ear. anyone else experience this?
What ?, try prefetching sounds, that may help with any sound delay.
Are you running warfare?
weird question i know lol. where would that setting be?
disable warfare
yes
Gamma doesnt support warfare.
bump
NO SUPPORT IS GIVEN FOR WARFARE.
ook
On the launcher, there is a check box for prefetch sounds.
ill check it out tyvm!
!default if it still happens.
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
In relation to?
yet another campfire save or something like that
original message has screenshot attached, here it is again
Yup that’s the one
Hello, I got a fatal error, happening consistently, every few minutes. I'm currently travelling through Darkscape.
in the log:
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\vehicles\veh_zaz968\part\veh_zaz968_u_01_part0.ogf'.
YACS Better Campfire @vagrant fiber
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
COnfirmed, yes. Still crashes on shooting after updating GAMMA
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
Don't use the command after i just used it LMAO.
Try that, most problems with textures, models not loading, and rendering issues are fixed by re-installing addons.
But just to make sure, put your entire crashlog here
ty!
Anyone know why i zoom in while leaning left while aiming? No other action is binded to my lean left button
FreeZoom keybind on Mod Configuration.
MCM Keybinds.
Hi everyone, was wondering if there is a known fix for the ELCAN scope zoom bug -> When I switch sights with V once the ELCAN cannot zoom in anymore until I remove the scope and attach it again
try using this keybind, on mod configuration mcm keybinds
thanks
Will give it a try and report back, ty
See if it works, if it doesn't then try disabling Auto-Zoomed Out Scope mod.
yo so i downloaded the thing but im stuck at the grok thing i can close it when it finished the download
random crash
Hello people ! i am new here and im super exited to try this mod but i dont understand what am i doing wrong i cant get more than 18 mods active :/ can anyone help ?
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Can anyone say me why i can't zoom in in the PDA?
i allowed powershell and MO2 what do i do now
!333
To get the #📍577-mods-in-mo2 please, follow this:
1- Visit this link and download GAMMA_addons_downloads.7z https://gofile.io/d/WlndL7
THE MULTIPLE FILES ARE MIRRORS YOU ONLY NEED ONE 8.2Gb FILE. No need to get the 2.4Gb file because you already downloaded it to get the client.
2- Go toGAMMA RC3folder, move the archive there, right click it and "extract here" using 7zip so it creates the folderGAMMA RC3/downloadswhich will be now filled with zip archives.
Extraction errors can happen for few add-ons, this is not an issue.
3- Launch the GAMMA installer inGAMMA RC3/.Grok's Modpack Installerand click "Download GAMMA data" and then "Full GAMMA installation".
The archives stored in downloads folder willthus be installed to MO2 properly and you should reach the #📍577-mods-in-mo2 while saving moddb servers bandwith
is this normal?
I'm having an issue whenever a gun fight finishes up - the game will always hard freeze a couple seconds after the last AI goes down. Log file doesn't write anything, no errors logged. Issue happens with all default settings.
Yes
im so lost rn
There is a limit to the zoom.
Do you have Autosave enabled ?
I can open the PDA but i can't zoom in any way in. right click doesn't work....
Yes, this is normal.
ty guys
umm sry im little dumb 😦 , what does it mean?
What do you mean by zoom in ?, show me a screenshot of your pda.
Follow what is below the command.
If it's enabled in the default settings, yeah. Haven't touched it otherwise.
Are you on step 8?
can someone help it was completely random crash
Why should i post a picture if you can't see my problem? If you open the PDA its there but usually you click right click and then you have it so to say fullscreen,,, but that doesn't work for me.
You mean you didn't touch on anything ?, fresh installation ?
Fresh install, yes
hold on il retry it since i think i fucked it up hard
How many mods you have enabled ?
Is there anyway to still have shaders but to lower the intesity of it?
Hey, im having some issues with running GAMMA on a HDD, seems like its not calling upon things quick enough and causing the game to freeze while it loads. Are there any fixes or adjustments i could make besides obviously putting on an SSD? Thanks
disable all these mods.
Press Home, it will show you the shader menu.
For updates, is it a general rule of thumb that you should start a new save with updates or should we be good for the most part? This probably has been asked a million times before or is somewhere in bold that I missed I do apologize. And I am talking about a few days ago my list I believe was 333 mods and now it is 334, so not to a major version change I am assuming
- 332 right now, tried disabling YACS Better Campfire Saves in case it was a saving issue
Specs ?
You are good, unless told otherwise in the update section.
Thanks!!!
It removes the scope from my gun, when I press it again it attaches it again and I can zoom again. But pressing V once to use my side mounded sight it breaks the ELCAN zoom again
Try removing that mod i told you.
After you have a firefight, and the game hangs, quickly grab the crashlog and send it to me, so i can try to help you.
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
thanks
My game doesn't launch for some reason. After clicking run, it show's the icon for the game but then just closes
I think you just need to left click, you can't make it 100% fullscreen as far as i know.
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
What does it say next to the run button
we need the .log file no the .bkp one.
Nothing
No errors in the log, just "// Looking for snipers to delete..."
On mod organiser?
oh
GPU: AMD 5700 XT CPU: Ryzen 7 5800X Drive in question is a Seagate FireCuda 2TB
If you mean on the left, it says Anomaly (DX11-AVX)
Not looking for errors, just want to see what the log looks like.
Gotcha, will try to reproduce it again
Try enabling this mod, also, don't run the game on AVX since you got a pretty strong GPU.
the game dont launch help
I'm in the middle of the farm in cordon and I'm getting increasingly more and more radiated, I don't have any artefacts that should give radiation except a jellyfish in a lead case and I haven't eaten anything weird, am I missing something?
I did to no avail, already had both of those
!crash
Send your crash log where it was asked, not inside the #🤖bot-commands if you're here right now.
It's inside your Anomaly folder, this is the complete path: Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournamehere
You just need to send this file where it was asked, drag and drop inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Fatal Error can't open section 'head_damage_017' Any help with this guys, getting when launching.
I enabled aggressor reshade but it does not work, can someone help?
Yeah, the same for me. 'head_damage_017'
There are places that get you irradiated, that is normal.
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
- Detected CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz [GenuineIntel], F6/M14/S3, 2712.00 mhz, 38-clk 'rdtsc'
- CPU features: RDTSC, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2
- CPU cores/threads: 4/4
Found commandline file!
Initializing File System...
using fs-ltx fsgame.ltx
File System Ready...
FS: 74482 files cached 97 archives, 15392Kb memory used.
Init FileSystem 15.705850 sec
'xrCore' build 8028, Jan 29 2021
EH: 3CAABCFCFF6F3A810019C6A72180F166
-----loading d:/stalker anomaly\gamedata\configs\system.ltx
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report
stack trace:
You do this as well.
This is a safe zone with traders, I don't think this is one of them
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
They can still have radiation
for anyone looking at my xraylog it doesnt show the memory error on discord but does show it when downloaded dunno if you already know this
@glossy hornet Thanks man
I asked for the crash log file, not for you to copy and paste the error, you just clog the channel if you do that ffs.
nvm I think I found the problem, I was carrying anomaly bread, which does give me radiation
LMAO
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
It doesn't so up under artifacts so I missed it!
this is what its says when i press run
Don't use agressor reshade, it's really bad.
Check your task bar
Follow the instructions above you.
how can i add exceptions for Anomaly and GAMMA folders before starting?
ive already done that
Np man.
Looks like an underbarrel grenade launcher breaks it, works now with and without the mod enabled. But breaks regardless of mod when an underbarrel launcher is attached
which one should I use? and how do I install it?
Thank you for the quick support!
Might need to change the bar on the left to (DX11-AVX)
i tried that too didnt work
Oof, that might be something you wanna report to the mods or helpers, maybe they can tell grok and see if there is a fix for that.
Will do!
finished the download but the game wont start
ive tried everythink
What step from #old-how-to-install are you on?
Either the one that comes with GAMMA, or the one i prefer #🖇old-mods-posting message
Does it say 334 active mods in the mod organizer?
yes
@jaunty ice just make sure to not install the mod it asks you to, it fucks with the rendering and everything looks grey.
!default
Modlist
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
Does it crash when you start press run?
