#Digimon Pico Terminal

2088 messages · Page 3 of 3 (latest)

lapis lily
#

and the beta folder there is this

image.png
lapis lily
#

Ok, inside the 20260325 folder is the 20260321 beta. The album works fine for me. Now, the problem is that if I press the down arrow key to navigate the menus, it goes all the way to the bottom, not to the next menu. I imagine it's a bug. The other keys—up, left, and right—work without any problem.

rancid flume
#

My microSD card extender arrived today for my DiM cards to connect to the Terminal Sadly, I had an oversight and the metal casing on the extender wont allow the DiM to fully connect. Anyone have a example of a working extender? Preferably at best buy or Amazon xD

#

Maybe i need something more like this?

Screenshot_20260521_165323_eBay.jpg Screenshot_20260521_165354_eBay.jpg
shut galeBOT
#
SHINKA!

@rancid flume has evolved into Child!

rancid flume
lapis lily
lapis lily
#

Can I try the previous version?

rancid flume
rancid flume
rancid flume
lapis lily
lapis lily
rancid flume
#

No

#

Technically if u want to get to the buttons u will need to remove the board, which is another few screws. I honestly would try to wiggle the Dpad around a bit before even opening it up. Sometimes they are just slightly off, cause the input to be registered as a down instead of sideways.

#

Especially with these prebuilt devices, like mine (ali express) the Dpad may be placed a little crooked.

lapis lily
shut galeBOT
#

@lapis lily has leveled up! (6 ➜ 7)

levelup.png
rancid flume
#

Yeah they usually have little sticky pads placed on the back side of the Dpad for better contact to the buttons on the board. So if they put them on slightly crooked, or the Dpad is crooked, the pads start pushing Down instead of Right

#

I just want to assure you that it is not a bug. It is hardware issue

lapis lily
#

Yes, using the buttons, something must have shifted and now they're not working properly. I just checked and it's not a bug, so I have to open it up :/

lapis lily
#

Fixed, but I've noticed that one of the screws on the back cover never tightens completely. It must be a printing defect; I'll just have to live with it. At least it won't fall off.

subtle atlas
regal lintel
sleek vapor
fallow kestrel
#

Where does everyone get the sticker?

merry rose
#

@regal lintel Ask a question. Will you update to support bt com for this model?

shut galeBOT
#
SHINKA!

@merry rose has evolved into Baby II!

regal lintel
#

@merry rose

rancid flume
#

If anyone has a copy of the Mp3 files i could grab please let me know. I got 2 out of 5 working. When I play Butterfly for example, it says "Audio Playback Failed". Any help/Tips appreciated!

regal lintel
#

Make sure you're using the recommended spec for MP3 files.

wary dome
#

I bought this exact model, but I don't know how to use it, I was mainly on A-Com before.
But I'm feeling too stupid to ask 😭

lapis lily
# wary dome I bought this exact model, but I don't know how to use it, I was mainly on A-Com...

I bought it more for the album than anything else, and also for the Colosseum. I've never had a Wificom and I don't really know how it works; it seems complex to configure, and I've searched and there aren't any video tutorials explaining how to install it, so when I have time I'll try to do it. The flaw I've noticed in the construction is the screws; I had to remove the back cover of mine and one of the screws doesn't tighten properly. The resin isn't very good for screwing directly into.

#

The device itself is a marvel, and it's full of possibilities.

lapis lily
wary dome
shut galeBOT
#

@wary dome has leveled up! (6 ➜ 7)

levelup.png
lapis lily
restive spoke
#

And if anyone especially in Australia interested to buy Digimon pico terminal I make it

Also available in black colour

Include SD card

DM for more information

rn_image_picker_lib_temp_dfa45992-f19f-4166-89a6-967e9d6a3ae5.jpg rn_image_picker_lib_temp_2b108fba-5d31-4519-99d6-a0ee058fc220.jpg
lapis lily
errant jayBOT
#

Gave +1 Digi-rep to @restive spoke (current: #805 - 1)

wary dome
restive spoke
#

@wary dome yes you can just DM or if you are not too far I can help you out

spring ermine
#

Thoughts on what is causing consistent errors when using the Analyzer? Been struggling with getting this thing set up.

PXL_20260527_024034475.jpg
restive spoke
#

Probably wrong SD card and CIRCUITPY file

So what can I recommend is flash back from the start using the beta one

shut galeBOT
#
SHINKA!

@restive spoke has evolved into Baby I!

fallow kestrel
#

Does anyone happen to have any assembly instructions for the actual case? I have it all 3D printed, but now I’m trying to figure out what size screws I need to buy for the pico terminal, how to attach the flap, and where to find the sticker. Any help is appreciated.

regal lintel
#

@fallow kestrel Check the “Needed Parts”.

spring ermine
regal lintel
#

@spring ermine

spring ermine
#

I've used a 32GB and an 8GB but I'll try another one. Thank you!!

fallow kestrel
#

Got all the shell parts printed. Gotta get the internals now

civic eagle
#

Apparently they are selling your design on AliExpress

#

If this was known already sorry

ripe coral
#

"just look online" is crazy betalol

#

It's known

civic eagle
#

I guess this thing being that cheap on there isn't bad

ripe coral
#

And very unfortunately many people come here after realising it isn't ready out of the box zinokek

civic eagle
#

Oh I never thought it would be, but this is a good way to get the PCB and a decent case

#

Maybe once I'm working for a while

civic eagle
next hollow
#

joushiikuta doesn't sell the devices, he's just the designer and has specifically open sourced it so other could make their own.
I'm considering buying one from Aliexpress even though I have all the parts on hand just because I'm way too busy to actual assemble the device.

strange plover
#

I took the picture in this friend's link. I'm not sure whether the AliExpress merchant is my agent or whether I provided the equipment, but the picture is mine.

#

😂

river plank
#

With the summer sale going on atm, I’m probably gonna roll the dice and get the one on ali

errant jayBOT
strange plover
strange coral
#

Hahahaha hey that's my Reddit post 😂 Nice to meet you all 👋🏽
Im not blaming the seller I should have done more research before I brought it. It ended up being $180 paper weight 😂 I mean it works I just can't seem to get it to do anything.
I'll have a look threw the Discord and give it another chance, if not I'll give you guys a home run "stress test" on the build quality against my baseball bat 😂🙌🏽

strange plover
regal lintel
#

It would be better to include a microSD card when selling the device.

shut galeBOT
#
SHINKA!

@strange coral has evolved into Baby I!

strange plover
strange coral
errant jayBOT
#

Gave +1 Digi-rep to @strange plover (current: #413 - 4)

strange plover
#

That's probably the card problem. Good luck.

vernal tangle
#

Throwing out an idea if that's ok, have a choice to battle the digimon in the coliseum with either dmog rules or pendulum rules

strange coral
#

Alrighty so I went past the shop and picked up a 32gb micro SD card. This time both my steam deck and computer recognise it. Formattered the card to FAT32. This is what I got working so far

#

It seems to have all the menu options even upto the Xros wars 15 anniversary colour, but when I click on album it gives me these weird lines of something 🤷🏽‍♂️