#Anbernic RG556
2370 messages · Page 3 of 3 (latest)
awww shit here we go again
Antutu v9
T820: 473609 Points
d900: 442730
t618: 213115
it's odin lite tier. 😕
If something can’t do GameCube consistently I see little reason to spend more than on a t618 device
Gameforce Ace will be comparable to this in performance I think. Both 5.5” devices. But the rp4 pro demolishes both in performance unless you really want the larger screen.
(or ergonomics)
if you use the dolphin fork of mmj based on Ishiiruka 1142. aka android dolphin mmjr 11505, you'll get more than enough performance.
https://emulation.gametechwiki.com/index.php/Dolphin_MMJR
I just need Tony Hawk games to run at least 2x. lol. My nostalgia factor
Rarely end up playing anything else
I thought recent dolphin betas were on par or better than mmjr at this point
eh. not so much on old hardware.
I figure if d900 is a little over twice the strength of t618, most people will be fine with what they can get out of the t820 processor.
i have an odin 1 pro and the ps2 performance has been somewhat disappointing
so i figure this would be something similar
which games are the most dissapointing?
i'd have to test again, but i remember having to underclock and use native or sub-native res on multiple games i tried
I got shadow of the colossus working with a mild underclock on Odin lite. Personally going from t618 to d900 felt like a large jump a lot of games just worked with very mild tweaks at times. A decent portion felt plug and play with basically a Vulcan 1x global setting
I am really tempted but will wait for 4:3 or something close to it.
I love how, in the space of 4 months, the Odin Lite has gone from one of the most powerful Android devices, to just a really unexciting attempt.
The scene is in a good place right now.
Just needs software to catch up to hardware now, even low end hardware is really capable these days if you avoid the ewaste tier of devices
If the t820 is twice as efficient then it'll at least be interesting to see if they can put it in a 354m
If t618 is anything to go by, they won't put a higher-end chip in a 3.5" model
Still waiting on a 1080p OLED device with the dpad in the correct position. Sigh...
The correct position being above analog stick right
dpads belong on bottom
Yes. The Asymmetric stick layout was designed for people who were uncomfortable using two sticks at once.
Funny that these days it's really Sony that is the last bastion for symmetric sticks placement
They fixed most of the issues I've had with Dualshocks in DS4 times (small handles, no triggers), but not this
I feel like the idealized handheld would have a detachable left joy-con and come with both configurations so you can swap it depending on what you're going to play
This is something I learnt when I put both versions of vita side by side and preferred the non Oled model
Linux?
I hope not
Urgs Android only 😭
Just Imagine RG556 with Pure Steam OS like linux + RK3588s and good battery
good urine workmanship design as a selling point
lmao hahaha
same
i got odin2 so i am fine at the 16:9 section of the market 😄
But 4:3 endgame device is soemthing i am missing
That's the great thing about the odin, it drastically simplifies your needs if you are not in the gotta catch them all camp with handhelds.
This is exactly where I’m at
Would love a 5.5 inch 4:3 device that can play all or the vast majority of the GC, ps2 catalogue
Anyone know whats Battery RAM & Storage option on this one. Could not find anything. Did i miss it
Nah you didn't miss it
Meh a 5 inch screen would be cool too I like the size of the almost 5 Inch screen of my 505
Well, the battery seems 5500 mAh, nothing else got revealed
well i already have like 15 handhelds 😄
but 4:3 edngame is what i am missing
the odin pro is a decent tinker machine if you know what you're doing on the windows end. Most, if not all, ps3/xbox360 ports run locked at 40fps with rivatuner. stuff like dirt 3, bayonetta, borderlands 1&2, and dragon age 1&2.
people who are diehard antitinker tend to default to the path of least resistence and get a steam deck though.
It will last less than RP4Pro at its 1080p, that one itself last 2.5 - 4 hours based scale settings
That screen only goes up to 720p. You'd only do 1080 docked, and then battery life doesn't matter.
I mean, depends on whether that chip is indeed 5W, that could make a large difference
Then again, if it's that's low-powered, why make such a big emphasis on the cooling?
The more I think about it, the more that chip starts to make a lot for sense for RG406 than this
That’s what I’ve been thinking. Gc/ps2 only have some widescreen games. A powerful 4:3 with decent size screen.
Natively, widescreen gecko codes for GameCube tend to be really good
I kind of feel like 4:3 is mostly for Saturn/ps/N64 and below at this point. And the 405's cover most of that.
Most titles on PS2, killer instinct 1 and 2 and Tekken tag tournaments on mame are 4:3.
I get that many will do the hacks and such. But personally I would love to save some width and still have a nice 4:3 size at 5” or so. Maybe even just an rg406 or something with some more power.
More than 640x480 would be nice though, an rg456 with a 1280x960 would be very nice
RG456 1280x960 Snapdragon 7 Gen x
Even an 870 should do gc at 2x
The 6 is the chipset on anbernics so unless that one changes again, it'd be a t820 too
Not sure Qualcomm provide older models for long
Snapdragon 870 that is, not unisoc
maybe chinese salvaging from used smartphones can be possible
tbh i wonder when 21:9 handhelds will start to appear
Razer edge, gpd xp plus? They were already here and didn’t get much popularity.
oh
A waste of screen real estate
completely forgot about gpd xp, but thoght edge was a bit narrower
It’s 20:9. But I mean anything between 19:9 and 21:9 fall into the same category for me
Basically any phone screens
I don’t totally despise black bars like some, but at some point the device is artificially wide for the content it’s displaying.
Yeah I don’t want permanent black bars that will display on basically everything I use the handheld for
16:9 is fine even if I play 4:3 stuff on it as long as I also play 16:9 psp/ports
But 21:9? I don’t even go ultra wide on my gaming desktop so I wouldn’t even use that for streaming lol
21:9 looks fine on most gamecube/wii stuff when screenhacked
my only minor gripe with the XP plus is the vita buttons. nothing on it has rubber membranes, which are a bit more comfortable to play on. if anbernic uses the same membranes they did on the win600, it will be comfortable for dpad play.
Yeah I really liked my XP+ it was just too expensive
I played a bunch of GameCube and DS on it
I sold it for $200 which is closer to what it should cost. I think I got it for $330 originally off of AliExpress during a sale
i got mine for 240usd from someone who bought it, used it for an hour, and then put it back in the box. It's generally good for android titles like Tower of Fantasy, Children of Light, or Portal Knights.
if it has a t820 I feel like it has to be 150 to be competitive, but with an oled screen I just can't see it being less than 200-250
Yeah the T618 usually landed around 150 so you're right a T820 has to be more. And an OLED as well? 250 might be generous
Anbernic doesn't usually do discounts on their high end handhelds
t618 handhelds are usually around 125 now
with the rp4 standard at 150 with a d900 and then the rp4 pro at 200 with a d1100 it gives this a very rough pricing it needs to have to have a good price to performance
ehh well their rg505 has an oled screen with a t618 at 138 maybe they can have this thing at like 175
if it were me I'd still go up to the retroid pocket 4 pro
If it were the same performance as rp4 pro I would pay 50 more for oled maybe. But not at the performance level it's gonna have.
505 has old vita OLEDs in them. I don’t think Ambernic paid more than 3 dollars a screen
Vita oled is in a different class probably... not in a good way. I wonder if this is the same oled panel AYANEO uses.
If it ends up being a good oled, I know some people would be willing to pay a bit of a premium for that
If they are doing all their new higher tier devices with this T820, they might be getting a good enough price on them to keep the handheld's price under control, after all they have skipped the metal casing that pushes the price up by a noticeable amount
Source: https://tieba.baidu.com/p/8870780054?pn=1 via RGH Discord
So here's a GBA test on RG556 for some reason. Also seems like the glossy finish is here to stay, it wasn't a test mold
老周556实机视频..视频来自:百度贴吧


pls be more colorways
idk 50 more than a rp4pro is 250, thats too close to a base odin 2 in my mind
If it's ever in stock 😄
It's probably going to come in somewhere between the two rp4 models, if they have a good enough deal on the t820 then it might even match the rp4
If they don't have the heat issues, better battery life, and an OLED screen, Rp4 pro price would be a good deal.
Not that the Chinese price suggests it will be that low.
ideally yeah 175 I just can't see it under 200
I've been seriously considering buying a Samsung S20 FE just for gaming
what chip does that have?
sd 865
well they're like 160 used, then you have to buy a telescopic controller if you don't already have one
if it were me I'd just get a retroid pocket 4 pro
i already have a g8
Looks a lot less glossy in Anbernic's video
Games includes:
1.Android-Genshin Impact
2.PS2-God of War II
3.Android-Nine Parchments
4.Android-IdentityV
5.Android-Honor of Kings
6.Android-Game for peace
7.PS2-Devil May Cry 3
8.PS2-Devil May Cry
9.PS2-Half-Life
Official Store: https://anbernic.com/
Aliexpress store: https://www.aliexpress.com/store/1101412986
Of...
I use it a lot with my s23
nice, the gamesir g8 is about as good as it gets
Video's up!
https://youtu.be/TDWHQTOqLsU?si=Reut9fhkm1vA53J1
Games includes:
1.Android-Genshin Impact
2.PS2-God of War II
3.Android-Nine Parchments
4.Android-IdentityV
5.Android-Honor of Kings
6.Android-Game for peace
7.PS2-Devil May Cry 3
8.PS2-Devil May Cry
9.PS2-Half-Life
Official Store: https://anbernic.com/
Aliexpress store: https://www.aliexpress.com/store/1101412986
Of...
I just want a dedicated thing u won't have to unplug when I go out
the black colorway looks nice actually
@devout spruce Wow literally beat me by 1 min! 😂
OK I actually really like the black looking at the video
@prisma elbow Well both the Dimensity 900 and Helio G99 did very good at PS2 Emulation.
now I really hope it's around 170
thank god there is a black one
@spare grail If I get this it will be in Ice Blue. However I'd rather wait for a RG406M or P.
for 170 looks like a great step between the like retroid pocket 4 and 4 pro
or depending on the games you play a solid alternative to the 4 pro if you'd rather have the oled screen or more comfortable design
oled screen is a must for me. that's why I was talking about an s20 earlier.
A nice powerful and somewhat compact device that can play both GameCube and PS2 games.
We've been asking for this for years.
Honestly I hope it's AMOLED instead of OLED. It would be much better in Sunlight, Heat, and Travel.
I would take either or
Got what?
mainly cause I don't take my devices out
@spare grail It's just my personal preference.
the retroid pocket 4/pro
most likely this handhelds biggest competitor
a powerful compact device that can do gamecube/ps2
@prisma elbow Retroid Pocket 4 Base not the Pro you mean.
@prisma elbow The Retroid Pocket 4 isn't compact it's somewhat pocketable but definitely not compact.
I'm talking about something like the RG405M, KTR1, or RG351P
tbf this is just from looks, but I wouldn't say the rg556 is any smaller than the pocket 4
most likely bigger
I'd think this would be less compact cause of the controller handles
@prisma elbow I know this, that's why I said I'll wait for a RG406M or P instead.
The 6 in RG406 represents the Chipset being used.
hopefully p not m, keep the price and weight down and anbernic do usually manage to do decent plastics after all
@devout spruce I hope they do both. They'd make more money that way.
Probably not, those who wanted a good 4:3 are not going to care if they only have plastic models and they haven't had the chance to pay $40 extra
Like I've been saying, the Unisoc T820 should be on par with the Dimensity 900.
Most if not all GameCube and PS2 games should play at full speed at 1x resolution.
do you know if there's a compatibility list for the rk3566
the rg arc looks perfect for a portable MvC2 machine but I'm not sure if it works well
From my testing with the Odin Pro only games like Ty the Tasmanian Tiger 3 and PS2 games like Poinies Poin will give this Chipset issues.
Arcade or console version, the dreamcast one seems to work okay on mine
any version is fine, thats just the best fighter ever made so I wanna find some way to play it portably great
I would buy the 600 dollar arcade machine if I had stupid money and space in my house
did the sequels not grab you as much then?
its just more fun, I was into MvC3 for a while but it just didn't grab me nearly as much
the art style is the thing that keeps me in the most
It's interesting how many games work like that, sequels can be technically better in many ways but just don't click
MvC 2 straight has some of if not the best pixel art out there
very hard to beat with 3d rendering
Thanks for your requests in this test of the RG ARC-D from ANBERNIC (the Sega one). The screen was a little hard to capture on the camera and you may see som...
this might be blasphemous but I think I like MvC1 a bit more
Oh yeah, this is a lot better. Hope the white one is like that too
ugh its a little laggy, annoying
I was on stock Linux firmware for this test, you have Android Flycast, Android Redream and @half dew ‘s firmware that all could be better performing
admittedly, never played mvc1
Android Redream I bet runs well
I don't know why people assume this will be Odin 2-priced though
Apart from import taxes/shipping costs in specific regions, Anbernic's pricing post RG353 series is pretty reasonable, no?
I saw a post in China randomly guessing 200 usd, so that could be the expectation over there
There are usually a lot of estimates in those threads on Baidu, I wouldn't treat them too seriously
i think over 180 it will be doa unless the screen is really that good
Most of their recent ones have come in under estimates, stuff like the H, the Arc and even the 405V
yeah the 405v was their best pricing yet
it released cheaper than the x28 was at the time
or close
I think the added cost of the metal shell on the 405m confused people's estimates for a while, that's basically $30+ on the price on its own
yep
$200 would be a bad look 
athough i think their prices for their dual boot devices are pretty dumb
Yeah, the premium to get the proper colours on my arc was annoying
i actually like the transparent black best
maybe after i get rid of some handhelds after getting the odin 2 i'll try the rg arc out, i'm mildly interested in sega games, megadrive is fun
It is starting to get some CFW now
retroarena seems good on it
yeah kinda
i think they have to make something special for me to care about this part of the market when the odin 2 exists
maybe a 4 inch 4:3 clamshell or something weird like that
for me the odin 2 is a really hard sell
you have to REALLY like emulation and the form factor to choose it over a steam deck
if the base model was ever in stock maybe
but currently you can only ever get the pro model for 370 which is like... yikes
i think odin and deck are totally compatible
O2 is hopefully a lot more expensive than this 
it better be
$150 would be ideal but that’s not gonna happen
you never know
It should be this chip was meant for budget phones
because its pretty much the same thing but with a different grip and an oled screen
within 20 bucks of the rp4 at least
You are taking a soc hit because it’s worse than d900 but yeah screen and ram would be a fair trade off within $20
yeah
oled is pretty great for non-16:9 aspect ratios
the black bars really disappear, i liked that about the rg503
just gimme 4:3 side device 😄
yeah, it would be fine for me as a middle of the road comfy handheld with decent ps2 with a 4:3, but 16:9 it's just too chunky
i wonder if powkiddy is gonna do something in for this tier and gen
Powkiddy snap 
I've been messing around with Gamma on my Arc to learn Android for my next handheld.
It's really decent, but I do feel like Arc doesn't have enough power to compensate the overhead that Android brings. For example it can't handle Sega 32X with rewind turned on in Retroarch, even though that's a non-issue on the Linux side even on the 351 series.
So I kinda want an Arc 2 with better specs for Android. Wonder if 406 in April will be that (highly unlikely, but who knows)
Like yeah, Anbernic probably won't bring an Arc 2 just six months after Arc was released, but I'm going to be very pissed if I get an Android handheld and Arc 2 happens
Same here bro S23 with G8 is awesom
I love it but I'm considering a second phone just so I don't have to remove it
Are you in a country where galaxies are snapdragon?
US so yea
Looks comfy to play on
Games includes:
1.Android-Genshin Impact
2.PS2-God of War II
3.Android-Nine Parchments
4.Android-IdentityV
5.Android-Honor of Kings
6.Android-Game for peace
7.PS2-Devil May Cry 3
8.PS2-Devil May Cry
9.PS2-Half-Life
Official Store: https://anbernic.com/
Aliexpress store: https://www.aliexpress.com/store/1101412986
Of...
I’m here for comfy handhelds
Yeah, very comfortable, but not surprising when you consider it is about the same size as the rp3+
Ergonomics matter
I guess, 1st was RG405v and Anbernic took feedback
As so many peaple used grips with boxy handheld, it makes sense.
I will make S23 my permanent Yuzu handheld next year when i get S25
Yup, if it turns out to be good then I hope we get better colors because that blue looks gross with the rgb
Wondering who asked for Glossy finish from any handheld maker
Shoutout to the people who valued the 35xx+ at $80
I feel like Anbernic have been on a run of good, but not great, handhelds for a while. No runaway hits, but the sort you look at and are happy the option is there.
So hopefully this will at least be good.
software ;_;
That's for someone else to deal with.... 😦
This is a new Android version so who knows maybe stock will be fine this time?
I still can't look at this thing and not think something is off with the shell design....looks like a wish.com Odin 2
it's that terrible plastic
I was holding out on RP4 Pro waiting to see Anbernic gone the look of this has made my mind up for me regardless of what it does and doesn't run.
Yeah, I feel like after RG351P most of their devices are like "this is great, if you really need this specific feature", but not something you can recommend to everyone
E.g. RG503/RG505P — cheapest OLED on the market
RG353V/RG405V — most powerful vertical handheld
RG353P/Arc — love letters to SNES and Sega respectively
Okay, RG35XX is extremely popular, so kind of an exception — it just happens to be a device in an extremely popular niche (gameboy look-a-likes)
They do more devices than retroid, so they obviously have to do more variants
Yeah, but they don't really do flagship devices, everything caters to a fairly specific taste
405v/405m/505 were flagships in the t618 era
Chances are, RG556 will again just be the cheapest OLED PS2-capable handheld on the market
Yeah, even with that one, there is nothing about it that really makes it special. It's just functional, and lucky the community managed to overclock it to do all of PlayStation, and added great cfw to.
Don't get me wrong, I've bought 2 as presents. But the reason was garlic, mplayer, etc.
The actual hardware, the bit anbernic is in charge of, is just, well, good, but not great 😃
You can be reductive about most handhelds though
I mean, rg35xx's strongest selling point was that you could actually buy one. It came when Miyoo really had a supply problem
I think most of early rg35xx reviews boiled down to "can't buy a Miyoo? well, here's the next best thing"
rp2s, highest spec 3.5" display
rp4 pro fastest device if you can't afford an odin 2
x18s, smudgiest device
Yeah, retroid's thing is price to performance ratio, no doubt
I don't think people really care that RP2S has a 3.5 inch screen — the handheld itself is not actually smaller than RG405M, a stronger 4:3 handheld with a bigger screen
But RP2S costs less and isn't metal (which many people don't like about RG405M)
I’m all for oled but man the chip makes it disappointing.
I'm expecting $180ish on this
I am so hopeful for less 180 is pushing it 
Bigger, OLED screen and more ergonomic controls for $30ish seems fair
None of the best features of the 35xx actually came from Anbernic 🤷♂️
If Black Seraph and co hadn't taken it on board, it would barely be remembered now. Most of the initial reviews didn't even like it much, as jheronimus referred to.
Actually expecting is an exaggeration. 200 is where it's probably ending up, 170-180 is reasonable to me
the mm+ is so cool thanks to onion os too
also the 35xx had clock and hdmi out
Considering anbernics software and worse soc ngl $150 would be nice. I think 170-180 is fine though would rather it be further from 199
lol 150$ is a pipe dream
It might be 200+
I just don’t wanna think about that
over 180 is doa for me
I do like the HDMI out.
Mm+ launched in a better place though, unlike the 35xx, it could actually do the more difficult PlayStation games before the community got a hold of it 😄
i went from a 35xx to a mm+ and definitely think the miyoo is a better package, but it's mostly a taste thing imo
i also realized i don't really like the pocketable gameboys anyway
I’d say 180 is more reasonable
The issue is that other people fix shit for anbernic lol
Me neither. I bought 2 35xx's because they are easy for young kids to use 😄
The funny thing is, the mm+ Vs Rg35xx argument is just a discord thing.
The RGB20S probably outsold all the pocket Gameboys put together due to the viral fame.
yeah, probably did
Aye. They don't fix it because people just buy it anyway. And then sell it with the community version and make money off it 😄
Is this 100% confirmed OLED?
wonder about the r36s, it's probably gonna end up being the one with the second highest sales
nope, and i honestly doubt it
pretty sure the oled thing came from the days where it was also supposed to be d1200
It looks like the kinda comfy and cheap that could absolutely demolish the x28
Which I know was a big seller in China domestically
Personally the only interest I’ve had in an anbernic product lately is the 35xx h or whatever that horizontal was. Otherwise anbernic is always behind on something. Ergo shoulders and onboard chip being weak are the most common offenders
Aside from ram,soc, android version, and cooling nothing is confirmed basically
I’m gonna buy an arc shortly I think mostly for that dpad
It’ll be nice to have a cheaper but ergo beater handheld as a sidekick to my odin 2
All my other handhelds are non-ergo
this killing the x28 makes sense yeah, would have to be lcd and cheap though, agreed
Stick a t820 in the Arc and I would pay $200 for it.
Ideally add a stick and analogue triggers for Dreamcast/3D Saturn.
Then you have the ultimate sega device.
And 6 buttons on the front isn't exactly bad for N64 either.
And playstation as well. But a potato can do playstation now.
Right what did they give the arc, a 3566? Dam shame
yep
is this for sure OLED?
They haven’t confirmed that 
looks pretty good. wondering if it will be worth selling my GPD XP Plus.
i am limiting myself to only one arm slab and one x86 slab. same for pocketables
Isn’t that a downgrade?
power yes, library no, comfort- it's debatable. the xp plus is its own sort of comfy slab
You mean because it temp throttles the d1200?
Library aren’t they the same it’s android?
Good for the price and portmaster (and me buying it to just be a nomad basically) but yeah sucks for Saturn fans
it has manual fan modes, so there isn't really a throttle issue.
Tbhbinfind rp3+ superunmfortsble
Without grip
I meant it was big for a dpad-only device
Really only sad cause of the controller design lol, but such is life
If the 556 had the arc dpad top and stick below it would be amazing
Even if it stayed at 4 buttons on right
Instant buy for me if its below 200$
I’m a dpad bottom person but arc dpad should have been used no question
as long as it has the win600 dpad/face-button/shoulder membranes i'm fine with it

the 820 should play switch, right?
if it has 8gb of ram, yes. if lesser, you'll be playing stuff like DorfRomantic, No One Saves the World, pizza possum, and lower requirement games
anything can play celeste
i have about 20 games on my XP Plus that run on its 6gb of ram
I think anbernic was working on this before the ARC.
Xp plus is a lot more powerful
I wouldn't say "only 2d". just not intense 3d stuff.
like.... Neverwinter Nights Remastered and Gothic should be fine
The amount of switch that will work is gonna be slim
If u want switch literally any other $200 device will do better
Odin pro or rp4 pro
i dont need a new device for switch i have a switch
It cracks me up when people get a device or speculate and immediately look at the outer edges of what it can play instead of getting something adequate for what they want
switch is probably the best device for switch right now
This is a ps2 device with whatever u get out of switch as bonus
100%
will it play metroid prime 2?
that's really the one game i want portably
D900 did but idk how close this maps to that in actual gameplay
I only play Nintendo IPs on a switch. All other games there is better ways to play them.
especially those with android ports
i could pass on ps2. gamecube, wii, and 3ds are enough
vampire survivors, minecraft, terraria,
Wii is the biggest hassle to emulate
Do we have a suspected price?
Controls are a pain to setup
Cny side thinks 180 for them but that’s speculation and hopefully not as international is usually more
If it comes out at much more than RP4P pricing, this thing is dead in the water
really? i set up the wii controls for slaminger on the retro arena build for OGU. its just a matter of mapping gestures and ir to the right stick.
most games only need forward/back mapping to do anything. you get some edgelying games like Modern Warfare and MW Reflex that require side-shake mapping for reloading, and that's it
if that were the case I would play metroid prime 3
wait that uses the pointer
i know there's a fork of dolphin called PrimeHack that lets you use traditional controls but afaik there isn't a primehack mmjr
your other option would be to get an android ir remote and map that like a numchuck. it's kinda janky, but eh.
Yeah, if T820 is similar to D900, that chip can mostly handle the Beetle core for Saturn, so it would be an awesome fit for Arc 2
