#🆘︲help-and-support-old
1 messages · Page 63 of 1
Can you dm me the osmo and INJ addresses, and what you're trying to bridge? Also a screenshot of that error
done
I did this on the injective explorer site and it’s clear that I staked INJ but I don’t know how to read this and don’t know how to figure out what validator I staked to. Can I get some more help please?
On Injective explorer, go to the Staking tab and you'll see it there.
It says no delegations found. But when I click on transactions, there are a number of transactions of me sending INJ to addresses starting with inj in the address so I’m confused. I staked INJ for my father in law in 2021 and need to get the funds out now and can’t figure this out
Can you send your INJ address here?
Also did you interact with anyone in private messages or anything similar?
0x300e1756d57CAe41927880CE6FFc65aa535c4E92
I mean your INJ address starting with inj...
Or did you stake with Equinox staking?
Yes equinox
If you wish to recover the ERC-20 INJ within the DepositManager contract from Equinox staking then you can:
- Go to the contract: https://etherscan.io/address/0x53f2b8cc450679d04c479a048dc3ff39a4d20d13
- Switch to
Contracttab. - Click
Write Contract&Connect to Web3 - Select the
withdrawAllfunction & clickWrite.
WOWWWWW that did it!! Recovered 88 INJ tokens from that @lime sun !! THANK YOU!!

So I’m guessing I didn’t get much from staking because I had it stuck in equinox correct @lime sun ? Not as much as if I had been staking on the current platform right?
Equinox staking ended somewhere around OCT 2021 afaik, so probably yeah, moving it to Injective network and staking may have had more rewards.
https://x.com/injective/status/1444417554328522761
I’m wondering how I find information about how long till my staked Hydo gets unlocked, shows nothing in my wallet
You can check it on pulsar finance
Or on the hydro website
Thanks
Additionally, you'll need to claim your unstaked assets on the Hydro website. They won't be automatically added to your wallet.
Thanks
@random bobcat Can I please get access to the validator Channel. THanks
Done
Can someone tell me how I can bridge inj from bnb chain to eth/inj chain?
You will need to use Binance as a medium
Deposit the INJ on Binance > withdraw on INJ chain
Currently there is no direct bridge that would move INJ on BSC to INJ on Injective chain
When transferring all my INJ to Ethereum, I am getting no gas issue, what should I do?
Fix skill issues.
When you're bridging, make sure you leave some INJ for gas.
Is this really the only way to do it?
I cant access binance because of geo restrictions
within the metamask portal you can select both assets to bridge, does this bridge not work?
some people use the squid router but you would have to do your own research on that
I see the squid router page and it looks fairly easy to use but why you say dyor, is it not safe or risky in a sense?
have seeen some of the community use this and even recommend the tool have not use it myself
just dyor before you use any tool out there
Cool, thanks. Will have a look at it thanks.
Will the INJ team keep the BNB contract active?
what do you mean by active?
well maybe a rookie question but is there not a way or possibility that a contract address for a particular coin (inj in this case) can be depreciated?
so that inj on bnb chain wont function anymore
or cannot be used/swapped anymore for instance?
don't think so, usually things get depracated because there will be a new standard and a way to move that old token to a new one is also created for users to migrate
but no don't think something like that will happen and if it ever does tools will be provided to migrate to the new thing
Cool, thanks for your help. Much appreciated.
Any time
@slate mulch It’s fake?
This guy just sent me a friend request
Was not me
2 tt
Waived? I think the bridge fees for bridging to Ethereum has never been waived as far as I remember, the bridge fees is there mainly due to the ETH fees which the validators need to pay to unlock your funds from the Ethereum bridge contract and transfer to your address.
The bridge fees was previously 50 USD but as the fees on Ethereum decreased, it was changed to 25 USD.
Oh, that's Ethereum to Injective.
You pay the gas for that transaction so there is no need for bridge fees.
Hmm, maybe it was way lower back then? The bridge fees for Injective → Ethereum just depend on the fees on Ethereum.
Yep, the transaction fees on Ethereum is the main deciding factor for the bridge fees, so it can change accordingly as the fees change on Ethereum.
Past few months the fees was really high so the bridge fees went as high as 50 USD, now it's lower so it's 25.

You too!
regardless of the unlimited spend approval transactions allways have to be signed
you can remove it if you feel safer
when you interact with it again it will ask for it every time
yeah but the fees are minuscule really small
don't really think that you will be spaming that were it would become an issue
yes it is. it won't affect it at all
how to transfer my inj from bep to inj network?
At the moment you need to use binance to deposit the inj the nyou can withdraw it directly to inj network
ok, still bsc bridge is not ready !!
I am having issues connecting metamask to injective hub. Anyone suggestions?
What errors are you getting? In the meantime, ignore anyone claiming to help in your Dm
I’m having trouble connecting my Metamask wallet to INJ Hub on Firefox. Nothing happens when I click on MM. Can anyone share why this might be? Thank you 🥳
Restart your browser and try reconnecting
also try clearing your browser cache
Thanks. Will try 🙏
It didn’t work. Other wallet icon seem to work fine but nothing happens when I click MM
Log into your metamask(open the extension and input your password), then try reconnecting to the hub
let's see what happens
Not working either 🤔
Can you attempt this on chrome browser?
Can I get an idea on what device you're using? I was able to connect to the hub with firefox just now
Laptop
Windows or mac?
Mac
Will report this ser...
Many thanks
Same problem trying to bridge on helix
What problem?
i tried updating the logo of a token a few days ago via the inj github. it shows that my request was merged to main repo but it still isn‘t updated on the blockchain nor on websites fetching metadata such as dojodwap. Any help pls?
Try disabling any other wallet extension you have and then try connecting metamask again ser
Can you send a link to your pull request
Okay. Will try. Thanks
My metamask wallet linked to my staked injective wallet is different. Can you please help me?
Can you send a screenshot of what you mean please
The wallet address that shows here does not contain my staked INJ. I have connected it to my main metamask wallet.
My staked wallet was supposed to end with "qx5qj8" but when i try to see my stakings while connecting to my metamask, I was provided a new INJ wallet. 🤔
How many wallets do you have on your metamask? please confirm you are on the right address/wallet
I only have one
and also check if you have other wallets like phatom frontrunning your metamask
the addresses should be the same if you connect the right address to the hub
I don't have any other wallets, I just have metamask with one account
Can you send the wallet address
0xc51937b68318b8450C3A79c9D99617382c0aeeb2
this is my main wallet connected to INJ Hub
This wallet have 1 inj staked
inj1c5vn0d5rrzuy2rp608yan9sh8qkq4m4jqx5qj8
correct?
Yes
So this is another wallet connected to the hub and not what you sent
Yes correct
please confirm if you have other addresses on your metamask, disconnect them and connect to the main wallet
to see your stake
I only have one address which is the one I've shared
This the injective address of this wallet
inj1c5vn0d5rrzuy2rp608yan9sh8qkq4m4jqx5qj8
But it is not the same with the image you sent meaning there is another wallet connected to the hub currently
Yes, when I try to connect to INJ Hub with my metamask with the wallet address "0xc51937b68318b8450C3A79c9D99617382c0aeeb2", I get the wallet I've shared in the screenshot
It was supposed to be connected to inj1c5vn0d5rrzuy2rp608yan9sh8qkq4m4jqx5qj8 and not inj128zwmj88ufg0rn7jmwl2kryw0w6cfjvlc67wry
please click on this drop down arow and send a screenshot
Can you now see it is not the same address as this
.
So you have another wallet that is connected to the hub right now
How do I connect to my metamask? I clicked the metamask after getting the prompt to connect to my wallet
How many wallet extensions do you have ?
i guess one of them is opening up in place of metamask
Is it because I have trust wallet?
Oh found the issue
I just removed "trust wallet"
Thank you so much @daring minnow 🙌
Which is what i have been saying
A wallet was connecting in place of metamask
You can always disable them and enable them when you need it

I dont understand why it was opening trust wallet even when I choose metamask
Well some wallet have those features
Understood. Thanks
i am having a problem with the injective bridge, when i try to bridge inj from osmosis to inj it says ' not enought inj to pay for gas' even thought i have lots of inj in osmosis, this has happened multiple times and would appreciate some help, using keplr and metamask wallets! thanks
<@&1253783961771966464>
scam!
do you have INJ on Injective network?
no
whats the best way, squidrouter?
Whatever means you deem fit to get INJ on Injective network. You can go via cexes that support Injective network withdrawals as well
cheers man
lmk if you have any difficulties later on
top g man works great

I can't type in 🚀︲dev-chat anymore although i had the role.
I wanted to ask if the inSVM Docs are still in work because the guide in here leads me to a dead link:
Which link?
InSVM is currently on pause until further notice.
I have a meme marketing proposal for your project that can bring in 15k new eyes on your project
Let's talk about it
if it is atom on INJ would be to bridge to atom chain directly and then use another one (maybe portal) to bridge from ATOM to ETH
Team is working on it since quite some time. Are there any developments of Injective with Coinbase at all?
is in the works as said above
These are few other bridges which support Injective network but please do your own research on them before using.
you can check some other bridges maybe
Does this option convert Hinj to regular INJ ?
no. That is to change the HINJ from CW20 (Cosmos token format) to BANK (Injective Native token format)
You need to go to Hydro website to convert it to INJ
ah ok thanks
Anytime
I have a problem with collecting staking rewards or unstake INJ on Ledger with Ledger live. I have tried several time. It asks me to open the cosmos app on the ledger, when I approve the transaction, here is the error message : invalid broadcast return (code: 4, message: 'signature verification failed; please verify account number (1078493), sequence (9) and chain-id (injective-1): unauthorized')
If you can help me, it would be very nice
ok thank you
Looks like there is an ongoing issue with ledger live.
You will need to try to connect your ledger to Metamask. and them go to Hub to claim the rewards https://hub.injective.network/staking
Or use Leap or Keplr there you can unstake right on the wallet extension
you need to add the inj netowrk on keplr
you can search for injective on this link and add it to the extension
when I type INJ on KEPLR it founds it. I have to add it ?
yeah
it's a new INJ network ?
ok I will try this thank you and sorry asking the same questions I guess 🙂
no its ok let me know if you are able to claim
for now it only created an account on ethereum so I didn't find the right way
on keplr?
send a screenshot of the extension
I do add token
but not the good contract address
What contract must I choose ?
When I try with injective hub and ledger (with Chrome) I have this error: Ledger device: CLA_NOT_SUPPORTED (0x6e00)
I don't know why it is so difficult
iyou are adding the token
not the network
but it looks like you have the network selected
did you tried clicking on staked
when I try to add a chain, it says non native injective testnet
On the ledger I have all my INJ staked
I see them
On KEPLR I don't see them
On Injective hub I can't connect with ledger
I don't have your screen on KEPLR
this is hub
I made some progress
I didn't know I had 2 accounts on the same Ledger, resulting from my previous attempts to put my INJ
so now I see my INJ on KEPLR
It seems that my INJ are on Ethereum network
and when I use Ledger, it pushes the Cosmos network
If you were staking then your INJ shouldn't be on Ethereum network
Should still be the Injective network.
I was staking for sure
When did you stake?
Mm-hmm, and to the INJ address starting with inj...?
Or did you send to an ETH address starting with 0x...?
I don't remember, you can't see easily INJ address on ledger, you have to ask it to give the address
Can you see your INJ on Ledger?
I will see in my CEX account the transaction
Sure, lemme know what you find out.
ok thank you, I hope I haven't broke something
You likely didn't, don't worry about it.
the address begins with inj1
Yup! Then your INJ is on Injective network!
What exactly is the issue btw?
Yes, on Ledger Live, it shows INJ on Cosmos app.
and on keplr it switched the Ethereum network to validate
it's not a native etwork
Cosmos app and Ethereum app too.
usually when you send a token on a network you can't have it on another
It's on Injective network.
Not on Cosmos network, neither on Ethereum network.
It uses Ethereum app because using the Ethereum app, the dApp can send an EIP712 typed message (A type of transaction which is not Ethereum transaction but can be sign using Ethereum wallets) to your wallet and you can sign it.
It'll still be on Injective network.
Back to the topic, what exactly is the issue?
Do you wish to unstake or something?
Or were you simply unable to find the INJ?
I have unstaked with Keplr and it worked
Cool
so Keplr wins over ledger 🙂
thank you for your explanation and support
It seems that I have a lot to learn about INJ
Well, anything works as long as it gets the job done. :)
I heard Ledger is already aware about the issue, so they should be fixing it soon.
Anyone tell me how to add hydro token in trust wallet ? I try but not adding
Answer me buddy
This guide will show you how to add custom tokens using the Trust Wallet mobile app and browser extension. Covered in this guide Before adding a custom token, be aware of the risks Adding a custom token with the Trust Wallet mobile app Add...
I try so many time ,but when I put contract address nothing is showing can u help me bro
You put the right contract address right?
Yes I select inj native network,then put hydro contract adress but nothing shows ,u can try
Then I don't know man maybe you can better ask trust wallet for help😅 or wait for other people to react
Thanks mate
I'm trying to bridge eth inj to inj on your website (hub) but there is no transfer button showing
Make sure your wallet is connected. otherwise, it has to a bug or some network issues.
try accessing through https://bridge.injective.network/
This is the only Injective support channel and please beware of scam/phishing dms.
The button to complete the bridge transfer is missing from the website bridge page (that same website)
mind sharing screenshots? cause its working fine here
Ninji
Keplr
leap
You can check out this blog to know how to create an Injective wallet
This article has been updated in November 2023.
Get started with Injective, the fastest layer 1 blockchain optimized for DeFi applications, by creating an Injective Wallet.
What Is An Injective Wallet?
An Injective Wallet serves as the essential tool for engaging with Injective and the applications built on top of
personally, I will recommend KEPLR if you're using for pc and leap or ninji for mobile.
Iam using mobile. Thanks @daring minnow @maiden prawn 
I tried to withdrew inj from injective to osmosis and first transaction was pending and didnt went through so on 2nd attempt bridge somehow changed destination adress so i send money to god knows who... what can i do about it now 😏
Can you provide me your tx hash
78FED47FE86BB65A2D8153206E3207019D165C49E609D336FBAB446C30E49DC1
8.43 INJ is in your Osmo address.
Did you do something or, can not see funds yet
Check your keplr/leap wallet
that is not mine adress, that is problem
bridge somehow put this random adress as destination
i dont know how that happened
injective native bridge
When you were bridging, did you change your destination address ?
so i connected my wallet, first attempt failed and i just refreshed site and my wallet was still connected and i tried 2nd time to withdrew to osmosis and it just changed destination adress by itself
and i didnt noticed
Do you have any other wallet extensions?
If yes, then connect those wallets on the Injective Bridge and check your Osmosis balance.
you mean other wallets then keplr one?
If any other cosmos wallet such as leap
Dont have any other cosmos wallet 😔
Wait, let me check on it.
Sir, please check the transaction history of the address I sent above, If you can recognize them
and it can't automatically change your destination address on the Injective bridge.
I would recommend checking your Keplr wallet account tab to see if you have any extra wallets there.
Sigh
Can I add hrdo token to tw?
Trust wallet? No
Then can u help me ,which wallet support hdro token ?
You can use leap
Or bro where should I stake my hdro for future drops ,with best apr?
Better would be use injective hub to check your assets in your wallet.
Dyor ser

Atleast tell me where should I stake i don't know much about inj ecosystem
That's why am asking buddy
Recently, Hydro announced a JNI airdrop for their stakers. You can ask about it in the Hydro Telegram group.
You can stake your INJ on chain to get future airdrops, but still its uncertain.
And about HDRO, as far as i know you can only stake it on hydro website.
If you want stake INJ then check these:
Where to Stake - https://hub.injective.network/staking
Here's the Staking guide - https://blog.injective.com/injective-hub
I installed leap wallet bro ,now where is token add option? Am on inj network
If you have HDRO in your wallet, it will show up there.
I wanna deposit there ,which adress should I use ? Inj deposit?
Yes
Should be like this inj...
Yes but on mexc they say contract have /hrdo at the end ? Is any problem
I just put simply inj adress
Yes you can
Thats showing hdro contract address
@slate mulch I've sent you a dm about an issue with my kvUSDT/Usdt bot. Thanks in advance for your help
Solved
why fuck
on dojoswap and ninjavault
3 days its say that
my only transaction work its on coinhall to sold my daojo for dojo
but i can stake them on ninja vault
and any transaction on dojoswap write this
Hmm, can you try with another wallet?
NinjaVault and DojoSwap isn't really our product so I can't say it'll solve but feel free to try these:
- Try reconnecting your wallet.
- Try clearing browser cache and cookies.
- Try with a different wallet.
- Turn off VPN if you're using one.
- Try with a different browser.
- Reach out to that dApp's support if it still doesn't works.
ok thnaks
i try to reconnect my wallet restart my computer disconnect my wifi dont have vpn
cookie and browers gonna try this
yess thanks
inj bridge not working for sending to inj chain. and now neptune says server keeps disconnecting before it ssends out header. im trying to send from osmosis
What's the issue when you're on INJ bridge?
Do you get any errors?
yes but its different every time. some times long messages or says error 401 or says wrong json.
On Injective bridge? Can you send a screenshot?
it even does it with osmosis address. i been trying different ones and they all keep doing same thing.
Still.
yes and its showing this on neptune trying to add usdt.
Can you send your addresses, so that I can report the issue.
:(
You can DM if you don't wish to share here.
What happened to the exclamation command i.e !links, why is it not working?
checking on this
they're turned off temporarily, should be back soon.
Alright, thanks
I want to swap this token to INJ or USDC.Where can I do this?
check gryphone website
I can't find GRYPHON's X or Discord.But they are listed in the INJ ecosystem, and I can access the UI.But I cannot withdraw.
I can't access their social networking sites.Were they Rugged?
If so, it should be removed from the ecosystem immediately.
What's the issue you're having while trying to withdraw?
Ah, I remember they rebranded and are now named Kakeru.
Btw if anyone is sending your DMs then that is a scammer.
Injective's premier liquid staking platform. Maximize your yield with the first restaking platform on Injective and all of Cosmos.
Here's the new website for Gryphon.
And here's their new X: https://x.com/kakeru_fi
The essential engine for liquid staking, leverage, & lending on Injective
Oh, Thank you!! I will go to Kareru's Discord.
You can ask here: #🚀・dev-support message
What is the chain_id of Injective network ?
injective-1
Dont have writing permission on this channel unfortunately
quote #🚀・dev-support message
Gm, if you're unable to access the #🚀・dev-support and other developer related channels then please connect your GitHub to your Discord account and take the Developer role from the available linked roles.
How do I connect my GitHub to Discord?
- Go to Discord settings →
Connectionstab.- Click the View more icon (
>) and select GitHub.- Review the connection and allow to successfully connect your GitHub to your Discord.
How do I get the Developer role from the linked roles?
If you've done the previous and connected your GitHub then:
- Click on the server name on top left to open the server drop down menu.
- Click on
Linked rolesand selectDeveloper.- Then follow the procedure it prompt you to do and you'll get the role in just few clicks.
- Alternatively, you can also get it by clicking the
Developertag beside my name.
→ [Click here for a more detailed guide.](https://support.discord.com/hc/en-us/articles/8063233404823-Connections-Linked-Roles-Community-Members#h_01GK286J648XF4HPGKZYW9AMQF)
How to create a ticket?
You can ask here, block all the DMs.
Okay who can I contact for a possible partnership?
Leap
click on withdraw instead of deposit if you want to send assets from INJ to eth
ooh okay okay wait
my inj is on keplr
idk how do i send those
I'll suggest you use metamask for this as you can't hold eth coins on keplr as it doesn't support non-IBC coins
hi if the validator i'm staking with become inactive, and i need to redelegate, do i need to wait 21 days in order to unbond then redelegate?
You can redelegate without unbonding, but it typically takes 21 days for redelegations to be completed
But just incase you ask, it happens instantly from inactive validators
@native otter will the stake with a validator that turned inactive, become automatically unbonded? meaning i don't have to wait for another 21 days from the day the validator become inactive
ah okay, so if validator become inactive, no 21 days wait, immediate unbonded
yes ser
How do i check my level
Thanks
What level will get me to warrior?
Level 10
Level 5
no it was updated to 10
Recently?
yeah
Just got to know about that now.
Thanks
Hi, using Google Chrome I can't connect my Metamask wallet once clicking on Connect > Metamask. I tried for example Phantom Beta and it connects no problem, but when clicking Metamask nothing happens. Any advice on how to fix this? I've had no problem for the last yearish.
so you don't get any error message ?
nothing, its as if the button doesn't work
not even a prompt from the extension to connect ?
Exactly, nothing happens
-Please clear the cache and cookies
-make sure there is no VPN running
do that and try again
just did (those 2 options in google chrome) and it still won't work :/
how many wallets you have on that wallet ?
could you list which wallet extensions you have on chrome?
sounds like another wallet is messing with it
phantom and station wallet, maybe this last one, ima try get rid of it
some other wallets can prompt when you click to connect a metamask wallet and if you have a few of them it can sometimes make this kind of interactions
you can disable it and try again if you have a wallet that you don't want to get rid of
goddamn it it was Phantom the one messing with it, it works now thank you so much for your help
Anytime ser
Hi, I've completed the task yet no role is given
you have the ninja role what tole are yopu looking for
Injective explorer is not updating numbers correctly. Price feeds might have gone bad.
Working fine on my end
Hmm, looks like the price feed not showing accurate info. 🤔
yeah
Reported, thanks!
hello
this is not the channel for this
oky
#💬・general user here ser
How can i check my lvl?
okey
this chat is for help and Support related to technical questions please don't spam this channel with casual convos
reminds me of general few months back
Ninja Pass
The Ninja Pass will serve as your gateway into exclusive Injective products, events, giveaways, and many more surprises. The Ninja Pass is limited in quantity and whitelist spots can only be claimed via one time special access codes that are scattered across the Injective ecosystem.
Please comment access to code
??
what is your question
How do I get the code? @slate mulch
the code is rewarded to members for their work of appreciation it cannot be purchased or can't be given to anyone
can be earned from special events too probably one will be given away in the community call
which is in a few days
How can I be a member and how do I get the code? @rugged relic
already answered above
When and how do I win in community calls? @rugged relic
stay tuned for the community call
just attend and the winners will be randomly selected at the end
What channel should I watch and when is it scheduled? @rugged relic
ok thank you
How do I get the npc role out of my profile?
I did nothing wrong
get involved in meaningful conversations instead of spammy convos where you ask about how they are or howdy etc.
They hardly talk about any meaningful conversations on the general group but okay
Thanks
then try to make it meaningful or just leave instead of texting when you already know that it's gonna be a spammy/farming conversation
it'll be removed soon just don't get involved in weird spammy convos. wish you luck
Thanks man
anyone else having problem with injective bridge? "saying insufficient INJ" ?
What are you trying to bridge? and from what chain/to what chain?
Osmosis-Injective
Bridging INJ
you're trying to bridge INJ from Osmosis to Injective, am I correct?
correct
Make sure the wallet you have connected has the sufficient amount of INJ on osmosis chain that you want to bridge
I get the same error regardless of the amount of INJ I send
I have 10 INJ and cant send 1
I just bridged INJ to and from Osmosis and it worked fine. Can you send an ss?
screenshot, I mean
ooooh, I see. You need INJ on Injective network for gas fees
OK I was wondering if that might be it

You can always ask here if you have any more difficulties in the process
how do I get INJ if I cant bridge?
sorry if Im being noob
most efficient way is to get it via a cex but if you're in a hurry, I can send some to you. it's extremely cheap
tha would be really helpful thanks
Done, deleted your address for safety reasons
I thought transaction fees were always paid by the chain your are bridging FROM
thankyou legend
Your txn usually needs to be claimed after bridging, it was manual before but it's automatically done for you now, that's why INJ gas fees are needed.
How do I activate the warrior role on the server?
When you get to level 10
Oh. I thought it was level 5. I guess I'll keep pushing them
It was updated recently and it's now level 10
Okay. Thanks for the update
remember not to get involved in useless convos and get a npc
Okay then. You mean time out right?
basically the NPC role restricts you from gaining exp because of that you won't be able to level up
Oh
I'll try to avoid that then
Criteria to apply for ambassador
You must be a warrior
Have some transactions on Injective
Content on your socials about Injective
Also be active on the sever
Contribute reasonably
Thanks alot
start making content
there are no criteria to be an ambassador since ambassador is a person who represents a organisation or Brand but do check #🍉・community-posts and start making content and be a ambassador
and if you wanna be a Knight then there are some criteria for that
Hello. Does anyone know if the INJ deposit issues at Kraken is an INJ issue or their issue? Kraken said it would be fixed in 2-15 days, but it's now day 16 without a fix.
What's the issue?
Pretty sure it's not an issue fom Injective side though.
The deposits aren't in people's accounts.
It's there on the block explorer, but they're "trying to fix the issue."
Delayed? Or are they just not crediting at all?
Delayed for 16 days.
Should be an issue fom Kraken side, you can reach out to them to know the status on this.
I'll ask and see if there is anything we can do to bump this issue.
I've done that four times, only to hear the same crap.
It's on their status page, but the length of time to fix it continues to increase. Thanks for your help.

Is there a discod help desk or ticket system here?
You can ask here.
Also block anyone who sends you private messages or friend requests.
I have been trying to join the INJ telegram, but for some reason, I am blocked.
I am from backBone Labs.
We have $bINJ live and are deploying our product suite over the next two weeks.
Who can get me unblocked?
Also, may I post the links to our event here on Discord? After you verify my claims with Jenna.
What's your telegram username?
@rigid swan_is_me
Also, may I post the links to our event here on Discord? After you verify my claims with Jenna.
Yes, sure, you can post them in their designated channels, for example #💎・trenches-chat for NFT related stuff.
What about our StreamSwap event that is live right now?
May I show you the post here?
I think that would be okay in #🐳・degen-chat with a small info about the event and the twitter post about the event.
StreaSwap is a new Fair Launch Protocol. We are live in the first INJ stream. with the Galactic Syndicate and the $SYN token
ok
LOL that didn't work.
Fuck it im over it. No worries.
LOL
TY for trying
Try again, the automod auto blocks the suspected spam content.
TY.
It has been difficult reaching INJ community being blocked and I don't know why I am
on TG
It's mostly automod which automatically blocks some messages to avoid spam messages.
Mostly those messages which contain text about a token and links also get blocked sometimes.
Since INJ is a permissioned blockchain and we have passed governance, how come we can't post our events on the main channel?
We have activities and we fill blocks. Just need to let them know
You can.
Not in degen channels that no one will see for a week
On the main chat. In the main TG.
You can post in TG as well.
This is where we need to be holding contests and give aways.
Am I un blocked?
You're
This is the group.
The custom interoperable layer-1 for building powerful DeFi trading, derivatives & Web3 apps | Get Started: http://linktr.ee/injective
Yes
TY

I really appreciate it.
Ok so I jist want to confirm I have permission to post our evet. The one I just posted on the TG chat and the general chat here?
Sure
I will also run giveaways for the SYN token.

@lime sun I'm gonna prepare a little statement, and Ill show you first before posting anywhere
Sure
@lime sun We have a couple of variations of this we would like to share on Discord and TG. We only have 15 hours left in the event.
Feel free to
Ty you.
How to bridge from native Injectivce to ERC Injective?
You can use the bridge on the website
There is no such pair
I dont need ETH erc 20, i need INJERC-20
If I understand your question well you are asking how to get Inj on Erc20, the bridge supports Erc20 token bridges so you can use the bridge
To get Erc20 all you need to do is to bridge out. Just click on withdraw and pick Inj and withdraw the inj to your destination Eth address
To bridge in use deposit
You can use the bridge to bridge Inj to Eth chain and vice versa
And you can also buy from exchanges that support Erc20 withdrawal like Coinbase
How to get Inj to inEVM network?
Use this bridge:
https://bridge.inevm.com
failed to execute message; message index: 3: Generic error: Must send token 'peggy0x96F6eF951840721AdBF46Ac996b59E0235CB985C':
What're you trying to do?
when i add liquidity bot i get error like this
which pair?
usdtkv-usdt
Can you try clearing browser cache & cookies then try again?
let me try again
still get error
What's your INJ address?
inj15xedew9h2qsyvc9nzpf0h6u5uxx6hkx8ta3zmf
Thank you, reported.
If you get any private messages or friend requests then please block them, they are scammers.
ok thanks
Hi, can you please send the following to help replicate the issue? It'd really help.
- Right click on the page then click `Inspect' and then send the screenshot of the error you see on 'Console' tab (Located at top right of the screen after you click 'Inspect').
- Which wallet are you using?
- Which browser are you using?
- Hover over the 'Show more context' when you see the error on screen and send a screenshot of that.
Thank you.
Where can I report a scammer
failed to execute message; message index: 3: Generic error: Invalid grid spacing: execute wasm contract failed [!injective!labs/wasmd@v0.45.0-inj/x/wasm/keeper/keeper.go:401] With gas wanted: '50000000' and gas used: '269468'
be informed like this
helix platform is really hard to use
If I stake with Dojo Validator (recently added as a validator) will I farm memecoins / gems and also INJ at the same % APR?
Or how does this work, can someone explain please?
If you get the % APR only in GEMs that
might be lower than staking INJ no?
Ty
You will still get APY in INJ, and about getting GEM and ERA and other memecoins, it's up to DojoSwap. You can ask them.
Where can I do that specifically?
You can stake on injective hub
No like, where can I ask them the Dojo guys?
here you go: https://t.me/dojo_swap
⚔️ The first AMM dex on Injective ⚔️ https://dojo.trading ⚔️ https://twitter.com/Dojo_Swap
Ty
Team, earlier, I was staking out a bit of INJ. I had some profits available to claim as a result of this. However, I did not claim this profits, but added additional INJs to the stake with the same validator. And now I see that the profits is no longer available to claim.... Is this a bug?
The reward is automatically claimed when you re-delegate.
But where did that amount add up to? To the wallet? Or to the staking?
You can check on the explorer - https://explorer.injective.network/
I've already tried that, but I can't find any information about the reward claim there. Only transactions of adding INJ to staking are seen...
So, the next time I do this (add INJ to staking), I'll pay close attention to how the automatic claiming of rewards happens 👀
When you add stake to a validator or re-delegate to a different validator rewards will be automatically claimed.
#🚀・dev-support message
Thanks @inland quiver for your support!
anytime!
I cannot verify
What do you mean?
Block anyone who sends you private messages btw.
Im sorry it did verify
What did you verify?
Please provide more context.
Don't connect your wallet on any suspicious website.
When i got my invite and entered discord
Yes
Thank you , sorry im new here
It's fine, welcome!
Will do
Hello, I unstacked the inj coins I staked, but they did not arrive in my wallet.
TRANSACTION SUCCESS
559EDC9C5B42F0773BC8ABEB7CC818B296934AD63DC15BA7D16C851722C7ACB3
It should have arrived to your wallet for what I see
did you perhaps staked it on a liquid staking site and forgot?
There's a MsgUndelegate which basically says that you started unbounding. After the 21 days it should be on your wallet automatically without another transaction.
Hello ser! I have a question for the team. Is there any information if Binance is planning to add USDT in the Injective network for deposits?
No info on that, but stay tunned for announcements
If I redelegate will I get immediate staking rewards or do I need to wait 21days (or is 21days only for redelgate again) ?
It automatically claims the rewards when you redelegate.
It's instant, but you cannot move them again for 21 days. But you will receive rewards during the redelegation period
I am trying to send my INJ to a CEX from a Ledger linked to KLEPR wallet and it it fails if I try both Eth or Cosmos apps. Can someone give me some steps to connect properly and send. Thanks.
You can directly connect your Ledger to Injective Hub.
- Connect your Ledger on Inj Hub.
- Go to the /wallet section; there you can see an option to put your receiving
Injaddress.
Don't forget to put the memo.
The list of addresses pops up and mine is not an option to select.
Does it need to be on COSMOS or ETH.
I see the assets on KLEPR wallet but NOT on Hub.
Could it be stuck on COSMOS?
Nope
Try with eth app
inj1d0r59rswctk22qphvd7dpydlqekttvctaynyl2
When I connect to Leder I do not get this address.
check this blog ser:
https://support.ledger.com/article/12065806186397-zd?redirect=false
when I connect with Metamask, a different address comes up too. So neither Ledger or MM bring this. WHen I org purchases it was on COSMOS
No matter what I do the address in KLEPR wallet won't populate in Hub.
Another address not in use does.
This is not me
Sigh
What's the best way to send native to a CEX? Bridge to EVM first?
Native
Before sending your INJ to CEX, make sure to check if that CEX supports native INJ or not.
Also don't forget to put memo
ok it doesn't. didn't send of course.
I am also happy to send to a second EVM address. Is that a bridge?
ugh getting stuck again because it is reading the wrong EVM in MM
will try Brave.
Think I need to get the other Ledger, will come back if i can't figure it out thanks VM
Hello. I am in urgent of help. My pledged wallet has been controlled by the hacker. How should I do now?
Well, nothing to do now. 
Hackers are like cheetahs; you gotta be Usain Bolt!
In simple terms, you need to be faster than the hacker when moving out your funds after they're unstaked.
Indeed
💀What if we place a bot which is faster than hacker's bot....
Hello everyone
Hey have any questions?
Hello, I can unbond my inj on Dojoswap and I can't find a Dojoswap discord server, here what I get:
{"stack":"Error\n at n.<anonymous> (https://dojo.trading/static/js/main.2d5d4c35.js:2:13654240)\n at l (https://dojo.trading/static/js/main.2d5d4c35.js:2:9720213)\n at Generator._invoke (https://dojo.trading/static/js/main.2d5d4c35.js:2:9720001)\n at Generator.throw (https://dojo.trading/static/js/main.2d5d4c35.js:2:9720642)\n at r (https://dojo.trading/static/js/main.2d5d4c35.js:2:10612222)\n at u (https://dojo.trading/static/js/main.2d5d4c35.js:2:10612461)","message":"","type":"http-request","code":503,"name":"n","errorClass":"HttpRequestException","context":"cosmos/base/tendermint/v1beta1/blocks/latest","originalMessage":"","method":"GET"}
Have you tried their tg?
⚔️ The first AMM dex on Injective ⚔️ https://dojo.trading ⚔️ https://twitter.com/Dojo_Swap
I just tried and I've been banned lol
probably for sharing links
No questions, just checking)
Thanks.
What does it mean "Link Whitelist" role?
Gives you permission to send links.
Thanks))
why im not able to connect helixapp or any other injective app on my PHONE?
what browser are you using?
or are you using an inbuilt browser on your wallet?
inbuilt chrome
What wallet are you using?
Hi team, which bot did you use to display Twitter folowers on Discord sir?
What's the issue with the bot?
No sir, I just wanna know the name of this bot
Keplr and Metamask
wallets are working on Laptop but not on my phone
Because chrome on your phone does not support extensions
You can use the wallet browser itself and not chrome on your phone
Or you can use browsers that support extensions like kiwi browser
@daring minnow Can you answer my questionosir?
Mee6
Thanks alot
Kiwi is also not supporting
It does not connect to the Dapp?
I have native INJ on trust wallet, i cant seem to find a way to swap it for SOL or any other token for that matter. Anyone know a way?
You can use Helix
its giving same option of download wallet and wallets are already installed
When you download and install the wallets in a browser like kiwi that supports extensions it should notice it
You can just download the wallets app
Like download keplr wallet app mobile and use the wallet inbuilt browser that should work
thanks
Screen goes black while trying to connect my app with keplr. will it be our app issue?
Are you using keplr mobile app?
yes
Which dapp you using?
I created a token on tokenstation.app(INJ), can I transfer it to the Terra network? How?
Not sure if this is possible.
Lemme ask.
thanks
and if it's not possible, how can I create a token so that I can send it between IBC networks?
I think it is possible, I recall seeing a token factory being bridged to another Cosmos chain sometime ago, but waiting for an response about how you can do it.
You can also ask how you can transfer a factory token to another IBC chain in #🚀・dev-support (Check pinned messages if you can't type there.)
?
What's the issue?
I just asked the question..nothing to repeat
By reward rate, you mean staking APR or...?
i.e. 18.45 %
well this ever change or is it fixed
Wrong.
Wrong ??
It's 13.63% at the moment: https://hub.injective.network/staking
Not sure where you saw the 18.45%.
As for the main question; yes, it can change.
It depends on several factors such as the currently staked amount & the current inflation rate.
since I can't post here it makes this communication very difficult
stakingrewards . com injection
what part of it's blocked did you not understand
Also remember if you get any DMs then block them.
Ya ya
It's the links.
correct
Also not sure about this website which you speak of.
Yes, but if it says that the APR for staking is 18.45% on Injective then that is not correct.
You can check the current APR at Injective hub.
You are welcome to google stakingrewards injection
↑ I mean this.
Ok I guess I need to tell them so they correct this
almost ALL validators are showing 15% and up
very bad to misrepresent a major cap project this way
all native staking is wrong across every validator
I'll hold my hand from investing now .... thanks

Hey all,
I am struggling with something very simple and hopefuly you'll be able to assist here:
Creating a simple Injective transaction from 1 account to another.
I use the injective ts-sdk to the transaction. My signer is a remote signer that I execute the request to via API.
The signature response I get is:
r: hex string
s: hex string
v: number (0 or 1)
In addition, I am getting the compressed public key from the same API in hex format. If I try to derive the address from this pubkey I am getting exactly the same one as my INJ wallet.
The problem is when I submit the transaction to the network I get:
pubKey does not match signer address <my_address> with signer index: 0: invalid pubkey
When buidling the tx I set the pubkey in base64.
The attached signature is Buffer from r & s values.
The documentation is not very helpful and I basically did the same as the PrivateKey.sign method of the sdk
Hi, you can use the #🚀・dev-support for development related questions, check the pinned messages there if you can't type in the channel.
need some help pls. i'm trying to update logo for a token on github. all checks have passed but review was skipped and don't understand why.
Dont click
scammer
Deleted
it says "Review was skipped due to path filters
Files ignored due to path filters (1)
deprecated/token-metadata/src/images/kira.jpeg is excluded by !**/*.jpeg"
I will get back to you
Thanks
If you're adding your token's image to the token-metadata in the sdk-ts then that package is deprecated, you need to update it on the injective-lists repo instead: https://github.com/InjectiveLabs/injective-lists/blob/master/CONTRIBUTING.md
can someone kindly explain me what are does "ULP" I can see in my wallet in the hub.injective.network ?
i could take a look if you paste your address here
but sometimes people just airdrop some meaningless tokens
can you send a screenshot? i see some LP tokens but no ULP
sure, thanks once again
that ULP label looks like is just for LP tokens
are you providing liquidity on dojo and other platforms ?
yes
yeah tyhat is what it is. the factory thing is just how the LP token address starts
Sure man, anytime
@ornate thicket You can apply through here: https://injectivelabs.org/careers
Thank you
Alright thank u will try this
I participated in Helix reward 2.0 but I did not find me at results....
please help me. Thanks
What's your INJ address?
inj15wr2w0sxkmhy0jz6ltqg6jwqa3z7dcwpvndvlw
I lost information about Helix reward 2.0 campgain, could anyone give me a link?
Thank you everyone for participating in the Helix 2.0 Reward Season campaign! We are excited to announce the winner list and will distribute the rewards soon: https://t.co/aF4SJNWyU4
The Top 10 winners on the leaderboard can get a Ninja Pass! Please join
Thanks
??? Can I open ticket ?
You will get a reply soon
Good day, I am looking for a Injective portfolio app, like to check multiple wallets at once, do we have something like this?
Pulsar.Finance
inj1h7mvu3gyz72p9rl...alsrq7ggg8zjeghp07q
Is this your address?
it seems, yes
Then likely your other address wasn't included because you already have this address counted for rewards.
ok, thanks.
hey can somebody tell me if we can own a injective domain name forever or is it only renting for now
Thanks
Just renting
Like a normal domain that you have to reclaim and buy again ever x amount of time
mmmhh I would have hoped that injective domain was like solana's domain
Have not checked there lately but even on solana domains you have to sign every now and then if not it's auctioned again
Don't know how often. But yeah here it's more like a normal domain scheme
ok ok ty ty
needed help with binding address issue in galxe
hey
do you have INJ in your inj wallet ?
noo
because you need to have some INJ for galxe to recognize the address
try depositing some and try again
how many inj is required
could be 1 usd or even less just some small amount and it should work
okay
try that and let me know if it worked
why do you see two different inj staking apr
where please send a screenshot
that is probably without comission taking into account
each validator takes out a different amount in commission for staking rewards so is not always 13.6 (that is just a average) but is not as high as 16%
thanks for the help
Gm.
Is inevm undergoing repairs or is there a problem? I want to bridge my inevm, but the platform can't do that now.
My balance also decreased by a small amount, it seems the platform still takes the failed gas fee.
can you show me the transaction on the explorer? https://explorer.inevm.com/
Which transaction, sir?
DM me the addresses
Can you help unstake
You can unstake your tokens from Injective hub
Please don't listen to DM
The wallet is controlled, and there is no way to transfer fees in
So there is no way to cancel the release
The wallet is hacked?
No
Admins can't help you unstake as they don't have control of your wallet
Sorry about that but admins can't help you unstake as they don't control your wallet
Well be careful and beware of scammers
@lime sun hello, how to get validator node role? I've question about the incoming 1.13 upgrade
#1189372652561895475
#🚀・dev-support
Admins won't DM you first
Check the pinned messages in #🚀・dev-support, you should be able to type in all developer related channels then.
GM! Looking to discuss with the team regarding a free speaking slot at our next event and joining our free Twitter spaces. Who's the go-to? Thanks!
Please send an email to contact@injectivelabs.org
how do i get node operator role?
used to be able to post in the node operator channel
quote #🚀・dev-support message
Gm, if you're unable to access the #🚀・dev-support and other developer related channels then please connect your GitHub to your Discord account and take the Developer role from the available linked roles.
How do I connect my GitHub to Discord?
- Go to Discord settings →
Connectionstab.- Click the View more icon (
>) and select GitHub.- Review the connection and allow to successfully connect your GitHub to your Discord.
How do I get the Developer role from the linked roles?
If you've done the previous and connected your GitHub then:
- Click on the server name on top left to open the server drop down menu.
- Click on
Linked rolesand selectDeveloper.- Then follow the procedure it prompt you to do and you'll get the role in just few clicks.
- Alternatively, you can also get it by clicking the
Developertag beside my name.
→ [Click here for a more detailed guide.](https://support.discord.com/hc/en-us/articles/8063233404823-Connections-Linked-Roles-Community-Members#h_01GK286J648XF4HPGKZYW9AMQF)
When the update will finished? I need to pay some of my loan or i'm gonna get liquidated
We dont have an ETA on it please check back later
Damn, can't believe that i will get liquidated just because some network upgrade
So sorry to hear that just remember that there was a banner on helix reminding users on this (Ad block would prevent you from displaying it)
Guys, when will maintenance be completed?
there is no ETA but the team is all hands on this please check back later
hey there. i used inevm bridge a few minutes ago and tx failed. My inj is gone from cosmos wallet and never arrived on evm wallet. could someone help, please ?
feel free, i'm stuck haha
Please block anyone who sends you private messages.
no problem, i know he's a scammer, just wanted to be certain
When was the bridge done?
15 minutes ago +-
Hmm, can you send me your INJ address?
yep, can i pm you ?
We just had a chain upgrade 15-30 mins ago so that could be a reason.
Sure, feel free to.
yep, i'm reading about 'maintenance' just above... 😅
The same thing happened to me exactly one hour ago... I tried with another account, and the same thing happened as well... I sent Injective from two Keplr wallets to two EVM addresses, and none of them reached metamask... At the moment, I can't see my Injective in either Keplr or MetaMask...
Was it to InEVM or Ethereum?
inevm
failed
Can you share your INJ address?
inj15m25r5fdswjrerzdtsjaate7va0jdnmt2t4dll
and
inj1kal6q6m6qk64gk83n4wagl8excpq3p8q80a2rw
Both have same issue?
yes
Got it.
both failed, both injective gone more than one hour ago...
still nothing received by my side. @jaunty ravine i feel you bro 🙂
Waiting for a response on the issue but can you please also report to Hyperlane in the meantime?
https://discord.com/invite/VK9ZUy3aTV
InEVM bridge uses Hyperlane to transfer the assets so they might be able to look into it further.
ok thanks
My ARB tokens were sent to the wormhole and are stuck there. There is no message to retreive the funds or anything. If I can get some assistance it would be appreciated
Make sure you redeem your Wormhole transaction.
there is no popup to do such
Go to the bridge page and click Resume transaction
Then enter your TX hash and try claiming.
Bridge transaction not found, check that you have the correct chain and transaction ID
but I completed it on injective
What's the TX hash?
99117CE3B6B9D11F454CF3D9A3E8447D70A81CA48FE1029DC942A8C01544678F
Block any DMs btw.
yes i am ty haha
Try redeeming using this link: Link
How can I reach out to the founder or team of this project?
Regarding? Please provide more details.
Still an error.
Which error?
There was an issue while fetching transaction details.
Oh, no.
Just click on the link.
Then click Recover
Without doing anything else.
Well thank you so much! sorry for the trouble
No worries.
You too!
Hello
The server has closed without sending any headers. This is the message I received when trying to repay. Does anyone know why this happened? Tried multiple times
What are you interacting with that brings up this error?
Assuming you're using Neptune - it is related to the post found in the dev-chat channel
Adding to this @restive wigeon , here's the message #🚀・dev-support message
If it displays "No access", please headover to the #1257472581796237312 channel and select the developer role
Why is the network of INJ suspended?
Suspended where
Binance lol, big boy
Big boy exchange platform.. That was what got me worried
I think it's best to contact their support
As they will know better
So it is not suspended on other exchanges?
On Bybit it is available
It probably was suspended due to the chain upgrade and should be available soon
Well it will be opened soon
What's the first thing to do when you've just joined the network?
->Creating your wallet
https://blog.injective.com/en/how-to-create-an-injective-wallet-2/
This article has been updated in November 2023.
Get started with Injective, the fastest layer 1 blockchain optimized for DeFi applications, by creating an Injective Wallet.
What Is An Injective Wallet?
An Injective Wallet serves as the essential tool for engaging with Injective and the applications built on top of
Thanks
What's the next step?
Help secure Injective and start earning rewards by staking INJ in the Injective Hub.
Injective's consensus mechanism relies on proof-of-stake, providing an opportunity on an individual level to participate in securing its network through staking. By staking, you can earn passive income and receive INJ rewards for validating blockchain transacti...
I've already done it, there's some sort of guide to the ambasador program
Full info about the Ambassador program: https://injective.xyz/ambassador_overview
Thanks
You can start reading from here https://docs.injective.network/ or https://injective.notion.site/An-Introduction-to-Injective-947a39267e9f46c2a82b8a07d95b3730
Injective is a lightning-fast, interoperable, layer one blockchain optimized for building premier Web3 financial applications. Injective provides developers with robust plug-and-play modules such as a fully decentralized orderbook, binary options, real-world asset (RWA) module, and more, allowing developers to build a diverse array of sophistica...
are you referring to #🔊・ninja-announcements tasks?
Yes
Heyo guys i need some help. I want to bridge PYTH from Injective to Solana using Injective's bridge - Wormhole connect. When i try to send transaction i get this error non stop. Is there any alternative way or solution?
@junior yoke don't
@slate mulch
dont worry im not falling for these cheap tricks
nice
there is an ongoing issue there is currently being worked on, don't have an eta tho
aha well i will just use CEX as middle man
i guess unlucky now 
thanks for clarification
anytime!
What is up with the LINK-PERP on Helix? Can't do anything
please don't dm anyone
can you provide details on the interactions?
ex: you tried to place an order and got an error, or nothing is happening
I can not close my trade or add a SL. The price also seems stuck at 12,38 (from before the maintenance from yesterday)
I did get an error, lemme check: Orderbook liquidity cannot satisfy current worst price [!injective!labs/cosmos-sdk@v0.50.8-inj-1/baseapp/baseapp.go:1042] With gas wanted: '50000000' and gas used: '130212'
My trade with the INJ-PERP had no problem
what is your wallet address
well now that we are on Helix discussion
solved
so i wanted to swap my PYTH tokens back to INJ to withdraw them to CEX but... 30 out of the initial 32 i had just disappeared...
after 2 failed transactions to execute market order
no idea if thats part of the initial problem you mentioned above
mm let me have your wallet address so i can take a look
inj18assak80h4w59t2rg99ewd5cn3qefup9rcyxf5
no idea where they went lol, even i didnt find my transaction on the explorer
managed only to sell the rest 2 just now to test if im not crazy
and you say that you did not withdrew any funds from your wallet in between trades
nope
your wallet might be compromised
there are 6 withdrawals of 5pyth each
like bridging out
these are my tries to withdraw to my Phantom wallet
so it was jammed kinda for a moment?
because i did try it multiple times not gonna lie
atm there is an issue related with wormhole bridge and yesterday network upgrade
so that might be the reason why you are not seen that over there
but they left the wallet
every try that you attempted went through but is stuck atm because of the issue
hah well i guess when issue is solved i will get them in my Phantom
yeah i guess thats the issue, phew you had me scared for a moment 😆
correct, you might have to claim the pyth tokens using your solana wallet
from the bridge page
after the issue is resolved
aha alright, i will check periodically for updates and if i have more issues i will check here again
thank you really much for the help, stay safe and have a great weekend
Hey @atomic tide @austere knot
Please with whom can I discuss with regarding openings and possible positions
look at the careers page of Injective labs and see if you fit a position
https://injectivelabs.org/careers/
okay
I would really love to know of I can reach the recruiter or team.
Applying would be the best way to go.
I bought kadena. And it just showing 0. But van see it on explora.
How can I get to ecko wallet people . U work together ?
sorry, where and what did you buy? Might be best to direct it to them https://discord.com/invite/kadena
Hi mate, I'm guessing that's why I'm getting this area when I try to bridge via wormhole?
No
Hmm, I don't think Ledger is compatible on that bridge.
Better to use a hot wallet.
You can use the InEVM bridge to bridge to InEVM. @buoyant igloo
thanks
ok thanks
Hello, guys!
