#🆘︲help-and-support-old
1 messages · Page 60 of 1
what's the problem?
so i was on injective hub
and im trying to send keplr INJ to coinbase
so i connected my metamask to INJ hub
and i successfully sent my inj to inj hub
but the metamask address doesn't match to my actual metamask, even though i only have 1 metamask account
so now i cant send it back to my keplr wallet
but it automatically connected to this metamask wallet when i pressed connect
i have screenshots and shit but im wondering if the team could verify what this wallet is?
cuz im on it, and it shows my balance
DM me the address and screenshots
be careful about scammers
ok
@stiff obsidian goat
it's been a couple of weeks and they still in review ? why it taking so long ? zealy quests
The Zealy tasks have been ended. There may be further updates in the future, but no specific announcements have been made.
what is the gas fee for bridging inEVM usdt to Ethereum? I have $20 in INJ on inEVM chain, trying to bridge back to Ethereum mainnet.
Shouldn't be too high, what's the issue you're having?
Is that InEVM bridge?
I have enough gas fee on eth mainnet
https://bridge.inevm.com - This one?
same issue on hyperlane and inevm bridge
Strange, try manually increasing gas.
I can't even go to that phase though, it says insuffiecient gas fee simply.
has no one done it before? just to clarify inEVM uses INJ token as gas fee right?
Yes
thing is I can increase the INJ token on inEVM but then those INJ will be stuck there since we can only bridge USDC/USDT.
You can actually bridge INJ to Injective network.
The go to Ethereum from Injective network.
↑
Using this bridge.
Oh, Interchain gas.
That could be because the gas on Ethereum is high.
will do it anyway. thanks
I have just been onto Injective hub to check on my staking and it shows a balance of 0. I stakes a fair few months back now and trying to work out where its gone?
did you double check that you are connecting to hub with the same address where you staked a few months ago ?
yeah i have just seen that okx has some annoying monopoly on my browser
where you able to connect with the correct one ?
when i connect its my metamask by i dont think the address is correct.
try disconnecting and checking every wallet you can connect to hub
do you know if metamask address is same as eth address for the wallet?
no you would get a different address for Injective
than the 0x one
fixed. there some weird default wallet vibe with Injective Hub where even if you select metamask it connects default. so even if i had other balances on other wallets it would have done the same. Had to delete a wallet extension so it wouldn't do it
Thanks for the steering!!
anytime!
Can i hepl me
I can't send the message what I want to say?
I swapped on keplr wallet from TIA to INJ, but I didn't receive INJ. You can check it here: BF91622EBF0C2C763F44CC831474ED4D246ECE89D22A09C12044BA2A961B0B1A
ok i have sent it
???
?
you can use https://hub.injective.network/ to convert CW20 to BANK or viceversa
inj1u8amx6leee34y9kgv0ufmjypuhwg4mgptsr5pj
anyone getting Network error: Unable to fetch transactions?
Working fine for me
What are you trying to do?
trying to review my transactions
on explorer?
yup
Can you DM me, please?
ok
I transferred Aptos coins from the Aptos network to Injective and they arrived in the wallet in the form of CW20 . How can I return the coins to the Aptos wallet in the form of regular currencies?
ban this mf
You can convert them on Injective Hub from CW20 to BANK
HOW PLEASE
https://hub.injective.network/ connect with your INJ address, and you will see "Convert" button
@slate mulch ???
I don't see the swap on this wallet make sure you paste the correct one
You can try to send the transaction hash for that swap
BF91622EBF0C2C763F44CC831474ED4D246ECE89D22A09C12044BA2A961B0B1A
Check your wallet in osmosis
I have been staking my INJ coins for some time via my MetaMask 0x9e97282C2f4345Aa2EbF6809016cEe0a98d0484A
on their hub.injective.network/. And under two different accounts.
Once under
1)
inj1n6tjstp0gdz65t4ldqyszm8wp2vdqjz2thu2nh
and under
2.)
inj1smdl63cr69ll6r43lf55s6ww9568qua3tk4dg2
Unfortunately, I can only access the first account.
Question:
How can I access the second account again inj1smdl63cr69ll6r43lf55s6ww9568qua3tk4dg2
access?
With kind regards
Oliver Jörg Hartmann
PS: I can provide screenshots later if possible/necessary.
Where did you get this second account? Do you have multiple wallet extensions on the same browser by any chance?
Passing on my MetaMask address is something I don't like to do, but I'm a bit desperate as half of my INJ can't be reached. I had set up the second account somehow.
So it is just another added account on your metamask? Can you switch between them and try reconnecting again.
I have not found a way to switch between these two accounts. Originally, I had done everything on the old computer and hoped that there were default settings on that computer that were not on the new one. But no, without success. I tried everything I could think of.
DM me so I can ask you a few more details
Well first you have to understand that your INJ address and your Ethereum address are compatible, they're same address but in different hashing formats. So you would have to first remember exactly what or where this second account is coming from.
It might be something like a second account you added to your metamask or that you could be connecting with another wallet address without realizing. Only you can know what's going on exactly. So first I would check if I have multiple wallet extensions and if one of those could be it. Also trying between your multiple metamask accounts. Ultimately you will have to remember what were you doing, did you export the correct account on that new computer you mentioned?
Thank you, I will check all these possibilities.
any helper here?
I need help.. my computer get hacked, the hacker keep changing my staked INJ to a comission 100% validators... what can i do??
Sorry to hear that, sadly there's not much we can do on if your keys are compromised.
what is happening here
I transferred 4usdt from inevm to mainnet yesterday
and today I realize that it somehow cost me 1 inj
can you do smth ?
Fk off bro don't piss me off
is this support dead or wat ?
You received it on Injective then transferred it to another address: https://explorer.injective.network/transaction/2F7E56E9A9CEDC3FF672C7E686C61E6B7E900587FF21C4C0155AB9657E8D6947/
Here's the receiving transaction: https://www.mintscan.io/injective/tx/31A09C0A4A36B653F5876A3A7D9BCAC4868ECF10B012DA02450C1D2E3C01AA0A?height=67754773
You made a mistake with my previous transaction. In the previous transaction I swapped from ATOM to INJ, and I sent another wallet, then I continued to swap TIA to INJ without receiving INJ.
Before that, I also had a small swap transaction from TIA to inj and also did not receive inj. I made 3 swap transactions from TIA to INJ but I only received INJ tokens once.
Ah, it looks like that your swap failed and the funds were refunded to your Celestia wallet: https://www.mintscan.io/celestia/tx/7E6A7F28314124158B7F338658EFB27038D479357132D3AA5D02BF74642A5F33?height=1326330§or=logs
Then you staked your TIA on Milkyway.
#⚡︲about-injective Anybody have any expertise with bridging onto inj ? From eth, sol, inj, base ect. Some help would be appreciated.
You can use the bridges available on Injective to do so.
!bridges
These are few other bridges which support Injective network but please do your own research on them before using.
Also make sure that the asset you're bridging has liquidity on Injective before doing so.
How would i go about checking the liquidity ? Thanks for the help
Can check if the market is available on the DEXes built on Injective: https://explorer.injective.network/featured-dapps/
guys, can you tell me why this badge disappeared from Galxe?
You mean the quest disappeared?
why my inj wallet address on coin98 wallet different from Keplr wallet ?
same seed 😄
Try reaching out to coin98. But could be because they use different derivation paths on the same seedphrase
I'm sure cuz of this
but you know, my JS script showing same problem - on Keplr wallet address its XXX on my JS script its YYY address
what derivation paths should I use ?
my js using
const path = stringToPath(m/44'/118'/0'/0/0);
don't know what keplr use, you can check m/44'/60'/0'/0/0 or ultimately check with them if it doesn't match
i used 60 and 118
no match with Keplr
this is my code
mb problem in it ?
I'm not really the right guy to help you there try asking on, #🚀・dev-support but first get the dev role on #🎴︲get-roles-here so you can talk on that channel
I have injective ninja pass and I don't have role for that and I have been removed from ninja pass holder section
please send me a dm
Please see your DM 🙏
Ok
for some reason when I claim staked rewards it does not claim the full amount anymore. I'm using Keplr wallet..
I guess the liquidity in the wallet you make use of is high, try using the tokens wallet if possible or metamask wallet which offers a lower liquidity fee
but should this be an issue if I am staking to validators via Keplr dashboard?
I used to be able to claim 100% of the rewards but not anymore for some reason...
never mind, on Injective hub i can claim 100%, just couldnt do it on Keplr dashboard for some reason. All good
Then use the injective hub
Since you can claim maximum percentage
yes, ninja and warrior disappeared
In that case it's probably closed but will ask still.
which wallet support injective testnet ?
You can try here - https://testnet.hub.injective.network/
and here is the testnet faucet - https://testnet.faucet.injective.network/ne
Here is the testnet of helix - https://testnet.helixapp.com/
Replied in #💬・general
Also if you receive any private messages then block them, they are scammers.
I try bridge from injective to solana using injective bridge via wormhole, I am trying to claim the transaction in "Resume Transaction" but I get the following error "Your claim failed, please try again." It appears all the time. and when I click on claim, a window opens to confirm the transaction and when I click on "Confirm" the same window appears again all the time and consecutively. TX HASH: 968fc47095c2425067c8032e4ca0465847b4904ddc89ee6c2903ef76344793ec
Can be due to Solana's congestion, are you using Phantom wallet?
Yes, using phantom wallet
Can you try to redeem using a different wallet?
Might require several tries but that's probably the best choice.
To keep trying to redeem, should go through eventually.
say me what other wallet, thanks
thats true i had the same issue 2 weeks ago
so, using other wallet is solved?
thanks men
yes
can you tell me any wallet? i only know about phantom
what about meta mask
you can do metamask leap or keplr
just try with solflare bro
oh for solana, yeah solflare pahntom or backpack
yep
solflare and phantom are top on solana but on inj you can check the top things above
thanks guys, i try with solflare
okay give us feedback later when it is done
There is a scammer in this channel send me fried request and have injective avtar and phishing link on bio i ignored him
we do thanks for reporting
for the moment, i receive same error
By any chance, do you know if it is possible to cancel a bridge?
sadly no you need to keep trying it will eventually go through
Do I have all the time in the world to claim? I'm afraid of losing him
Yeah it doesn't expire
Thanks you!
I was trying to bridge zig to inj and this popped up from Metamask, is it ok? I've never seen this before.
are you using the bridge on the injective hub? double check the URL
It happens on https://hub.injective.network/bridge also
https://bridge.injective.network/
If you have double checked the bridge URL it should be fine. Are you moving all the zig you have? you can just select the max amount you have instead of giving it that custom cap
Yes, moving it all. OK, i'll just set it to my max then. Thanks.
can you also show me what it says when you click see details?
It just has a link to report an issue.
great
I am a newly graduated computer programmer. looking for a job. i want to send cv. how can i reach human resources. who should i contact. is there an e-mail address?
thank u sir
I would like to become an ambassador, who can I talk to about this?
!ambassador
The Ninja Masters Ambassador Program allows participants to engage with Injective like never before and earn exclusive rewards!
To get started as a Ninja Ambassador you must be:
- Following the official Injective Twitter.
- Add the Ninja emoji (
🥷) at the end of your name on your socials handles. - Check out the #⭐・ambassador-info & #🏹︲tasks channel to begin completing tasks to start leveling up.
- Click here to read complete program details.
just used the injective bridge to bridge SOL from Injective to Solana and on the last tx confirmation it failed. Now my SOL is neither in my Injective Wallet or Solana wallet and it says the tx has completed🥲
can you provide your transaction hash?
2scVT4FgpX364geJgV7HHjFguZ559oLPbiBksWN4YHo1rjqEiUtMv4axNrFxCuwsQXqrNjR98qpViCH5Lw8KJnj7
give me your injective tx hash
408091608BEF453FBB0BD5311C0D731EF5A3258117F998825323922C7AC6883E
go to injective bridge, and then scroll down click on resume transaction after that select source chain as injective paste your tx hash, connect your solana wallet and claim your bridged SOL
Thanks that worked🫡
Dear Admin Team,
I am Sabbir, Business Development Manager of Coinstore Exchange. We are Leading
Singapore based CEX.Request your support to know whom do I contact for potential partnership and listing scope.
Many Thanks
Best Regards
Sabbir Ahammed
Ser Check #📥︲collaborations
Are you writing contract?
@strong bobcat
I was guiding someone from my @tawny timber account in the local language #🇵🇰・pakistan channel about the Injective ambassador program. I may have been temporarily banned from doing something inside the Injective Discord server due to unknown right banned words.
Please remove the limitations from my account and also guide me which words are banned So that I can help remove the right words that are ban.
@slate mulch @lime sun
Thanks 👍
I made a mistake regarding a deposit of my injectives from the inevm network on metamask I selected the deposit on bybit from the erc20 network because I thought it was the same thing please can you help me because bybit we refuse to recover them is there not another solution it'is all my capital
https://inevm.calderaexplorer.xyz/tx/0xf2a205aa3e993e34129722f6978d559a13e14ca839b8a48a2f3907ea5cb56257
Sorry to hear that, sadly its entirely up to them to be able to recover it.
are there any plans to support this channel on bybit is it possible ? in this case I could recover them because I see them on the explorer on my deposit address on bybit
Ultimately if they don't support the network they would have to get one of their engineers to grab it for you, that's a lot of work on their side, it is technically possible to recover it as its an evm compatible thing, but it being so new might go against you.
Some exchanges have automated methods of recovery, sending it back to the address that sent it, but in this case its all you can do is to reach out to support, explaining your situation in detail. Include as much information as possible: transaction ID, coin involved, and destination address, how to retrieve it etc. And be lucky to have someone willing to escalate it.
I contacted him twice but always the same answer
I don't understand why he refuses even if it is an eligible token to be recovered according to their conditions indicated here
Yeah as I said, there's not much to do. I would personally try again at a later date.
I would emphasize things like its an evm and that it can be just added as a network on metamask as all other ones https://hub.inevm.com/
Also that it already have gas since you sent INJ to it, at least you are above that $500 threshold they give.
Try to also give instructions, again you are appealing to some support that this is recoverable, that's its the same as an EVM and that it already has gas, as INJ the coin you sent is used. Same as any other EVM compatible recovery, it will be sent to an ethereum like wallet, with the usual hashing format 0x3d734709372bBE0471f9067a29d011566F71C3BE
Make clear that this is not a caldera thing, always call it inevm, explain keep mentioning that's something EVM compatible, they probably saw the explorer and said nah mentally.
good luck, not an easy battle.
Thank you very much I will try again with them hoping that it will give a result
I am querying the hash, but I see that the official example is written so, but it does not run, please tell me why?
Try changing the endpoints which you're using.
How can I use my own rpc node instead? Can you give me code examples? thank you
inoperable
You can ask in #🚀・dev-support after taking the Community Developers role from #🎴︲get-roles-here and then ask there.
I have a problem with a INJ/Wormhole bridge, any admin here to help?
What’s specifically is not working??
I have honed my skills in blockchain technology, smart contract development, and decentralized application (dApp) architecture. I have a proven track record of successfully delivering projects in the web 3 space, ranging from building dApps for decentralized finance (DeFi) platforms to implementing secure smart contracts for various use cases.
One of my recent projects involved developing a decentralized voting application on Ethereum, which required implementing smart contracts for transparent and tamper-resistant voting processes. This experience not only strengthened my proficiency in Solidity programming but also deepened my understanding of blockchain governance mechanisms and decentralized consensus algorithms.
if it's a job you're looking for then please check: https://injectivelabs.org/careers
Thanks mate
if I have a question/support request for helix lp rewards, who can I connect to?
You can ask here or in #🧬︲helix-chat
It’s about 3 issues:
- still can’t get my LP rewards from past 2 epocs 2. Some of the lps (dojo/inj) participated in don’t even show up in a certain epoch, but I can see it when I go to a previous epoch and click on it and see my all time history 3. I had an Andre bot stop but then all the Andre disappeared. It’s in none of my smart accounts
The LP rewards issue is something which is being worked on and should be available to be claimed soon.
As for your ANDR, it should be in your subaccount, you can enable subaccount management from top right of the page and then go to accounts tab to access your funds.
Thanks for the quick reply. That’s what I meant by smart accounts. It’s not there.
Also unrelated to helix but 2other issues:
- I just bought kava usdt and tried bridging usdt from inj -> kava -> osmosis. The usdt from inj-> kava failed.
- I have 2 innprogresss bridges. Also I remember having legacy arb and sol and I don’t see them show up when I use the new bridge
The new bridge does not support legacy assets so you'll need to migrate them before you can bridge, you can migrate from the top right of the bridge page.
As for bridging USDT to Kava, I'd recommend you to not do that unless the USDT you're bridging is USDTkv, else if you end up bridging the normal USDT then it could be possible that there is no liquidity for it over there.
As for the ANDR, what's your INJ address? Lemme check.
That’s what I meant by buying kava usdt. That’s what I did
Can I msg u directly my addy?
Yes sure.
Are there any current plans or discussions for collaboration between Injective Network and Coinbase to enable INJ token support on the Coinbase platform?
I am not the only one with the negative experienced of transfering INJ tokens. The INJ tokens I attempted to transfer from Leap Wallet to Coinbase are currently inaccessible:
-
Coinbase provided an address lacking network information, which contributed to the issue. (INJ on ETH network with clarification and indication that it is on ETH)
-
Leap Wallet has auto-converted the address provided by Coinbase to another address on Injective network and automatically enabled the transfer of the Injective tokens. After my report of this issue, Leap wallet has admitted it and disabled this feature for future damage.
Are there any methods available to recover tokens?
I have contacted Coinbase and Leap Wallet. Leap wallet is not able to recover the funds. Coinbase Support has mentioned that their current recovery tool doesn't support the INJ network at this time but they would potentially add the INJ network to their recorvery tool in the future.
Is the Injective Dev Team discussing or collaborating with Coinbase to aenable INJ token support on the Coinbase platform or can I forget about my INJ tokens on that Injective network address?
Stay tuned for an announcement, keep it on record.
$50 for bridging zig from inj into eth chain. Is there a cheaper method?
These are few other bridges which support Injective network but please do your own research on them before using.
You can check out some other unofficial bridges if you wish.
Thnks!
I want my node to get new block within 1 sec. How do I do this?
You can ask in #🔩・node-operators after taking the Community Developers role from #🎴︲get-roles-here
Also please block any DMs, they are scammers.
Does anyone know how to succesfully create a CW20 token from your rust contract (afaik it should communicate with inj14ejqjyq8um4p3xfqj74yld5waqljf88f9eneuk as the CW20 Tokenfactory) @elfin snow
You can take the Community Developers role from #🎴︲get-roles-here and then ask in #🚀・dev-support
my "claim" botton is now active here https://app.xninja.tech What should i do?
Best to ask the relevant team of that dApp.
how can I write a DM to some admin?
@lime sun Your message could not be delivered. This is usually because you don't share a server with the recipient or the recipient is only accepting direct messages from friends. You can see the full list of reasons here:
Try again.
hey could you please dm me ?
I have just finisihed unstaking my INJ. I would like to move my tokens to Coinbase or Ledger. However, doesn't matter what address I use, the Injective Hub says that the address is not a valid INJ address. I've checked the address 3 times and tried another 3 times and I get the issue. I even tried putting in a random public address (obviously not sending anything) and the Injective Hub rejected the address. How do I solve this please? tks
sorry which admin? I missed that
ok can someone help me with my Injective Hub problem?
sure, coinbase for now only accepts erc20 deposits. You should either bridge it to Ethereum to deposit that on coinbase or connect your ledger to the hub, that should give you an associated injective address.
You can DM me
is there any dex available on inEVM i want to swap some inj there
You can check here: https://injective.com/ecosystem
under the apps on inevm section
i just did something really dumb, i never had a memo on binance, tried sending some inj over there and i didnt see they updated, now my cex account have a memo and i didnt type it, is there any way to recover my funds?
help please
Hey thanks for reaching out yeah you can fill this form to get your funds back
thank god this is not over
appreciate the answer ser.
Please how can I reach out to the admin directly?
What exactly is your issue?
Trying to reach out to the admin for a potential collab
@slate mulch
Thanks
Which explorer is used to check ASTRO port ?
If I have a txn , how can I use the explorer (which) to check
Thanks
anytime friend
63BFEC27C953E68B5E7499CABBBE453BE5A272BD79249E19F2254DC02327B5D9
This is the txn I'm trying to check
But it ain't coming up sir ,
that is a sei transaction not an injective one
let me know what happened maybe i can help you make sense of it
Oh thanks Flo
Nothing really. I just had d txn for a complaint . But needed to check the origin of the chain
what is your wallet address so i can take a look
yoiu need to use the wallet that you are connecting to hub and use that UI to send it to Coinbase
be it metamask ledger etc
coinbase should give you a deposit address
@visual ferry @alpine lava @wanton raptor @cyan wadi
If you're interested in providing some feedback please DM me
@stiff obsidian Are you ale to help with Injective tasks for Jambo?
what exactly is your issue?
The Jambo task requires me to retweet the linked tweet but when I click on the link, it doesn't exist.
Thank you. It might be the link on Jambo itself. Thanks so much
It shows your level and activity within the server, at the moment there is no benefit to these levels.
Possible but no information about it tbh.
Well, if you're well performing and contribute in every aspect then it isn't impossible.
:)
Simply talking won't really be enough, helping out people in server can be considered.
And yeah, posts on social media are a good advantage.
Lol
Well not exactly honorary Knight but we do have a Ronin role which is somewhat similar to it.
But it is yet to be given out to people, probably will be obtainable soon.
How do you guys get to know about these airdrop updates? please fill me in.
All of them are announced, but when they are announced participation is already closed. best way to participate on the airdrop is better to just tip your toes on the ecosystem and try to use most of it
always DYOR before you use any dapp
👍
👌
I made a transaction from Binance to INJ, and the service center told me, the transction was successful. But I cannot find it.
Should be in your INJ address.
Try connecting to Injective hub and check on the wallet page.
!links
But it's not connect to any of my wallet.
What's the issue while connecting?
Please add the gas, the OAT cannot be claimed because of it.
Which of your wallet are you trying to connect to the injective Hub?
If you didn't solve this yet I just made a tutorial on how to do this. Bridging and ERC20 versus Cosmos native $INJ can be very confusing! Check it out if you haven't resolved, and give us a follow!
Welcome to the Injective Ninja tutorial series! In this installment, WhisperNode, your guide through the world of Injective Protocol, will walk you through the steps to bridge to and from the Ethereum Blockchain.
As a burgeoning Injective Ninja, understanding the basics of navigating the ecosystem is crucial, and bridging INJ tokens is an impo...
Please I want the NPC role on me removed, I don't know what else to do and it has affected my rank it doesn't even flinch a bit ever since the day NPC appeared on my roles
Please help me.
#💬・general message
Just take a breather and interact a bit more organically, it should be taken off before you know it 
When withdrawing INJ from the INJ Hub wallet.
I put in my inj address from a decentralized exchange, when should it arrive? I tried a test transaction and it still hasn't shown up
Yup I know don't worry, Im on my stuff thanks for the warning tho
what shows on the explorer? did you confirm if you have to set a memo on the dex?
you can dm me if you'd like
Will do that ^^
@balmy harbor can I get help on how to read owned nfts from an inj wallet
NFTs are not natively supported on the chain. They are implemented using smart contracts. Thus you need to interact with the NFT contract you are interested in. You might need to know the contract interface (check the contract's implementation code if the repo is open source, or ask for assistance to the contract's developer)
I tried doing this previously by getting all code 49 contracts then getting the contract state for all and querying those whose owner is my wallet address
I got this button on my Injective Hub balance, but I dont know what to do with it. When I press migrate I just get redirected to the Bridge, which I dont know what to do next
Can someone guide me through this supposed migration? Thanks 
Migrating it will make it bridge compatible.
However if you want to bridge it to Ethereum then no need to migrate.
Bridge compatible meaning Injective bridge?
All I do with it is trade ocasionally (on Astroport or Helix)
No need to migrate in that case.
Thanks I'll leave it then
AFAIK migrating USDC will make it the Gateway USDC.
Currently what you have is the peggy USDC.
Oh, wait it's USDCET
Yeah it is
Not sure if it has much liquidity on Injective, the USDCET is bridged from Wormhole Ethereum.
Honestly I kinda forgot how I got it, must have been by error. It's quite a bit of money so I want to at least keep it useful
If you wanna bridge it back to Ethereum then you can still use the advanced bridge at Portal bridge to take it back there.
I'm facing an ranking issue, my rank level is not increasing after doing a many chat. It stands in one place.
chat in main channels
Which channel?
So rank will not increase in local channel?
no
But it was increasing yesterday
not anymore
Any changes in server
just engage in meaningful discussions with the members outside of regional chats
your rank will increase naturally
Ok thanks
But believe me, doing so will destroy the local channel. People also want to increase rank in their local channel by having meaningful discussion
you can feel free to have discussions in the local channels though
Yes, I agree with you, but the newcomers prefer to increase their rank while staying within their own people. I am a living example of this.
I see, thanks for the feedback sers.
For now you can use the main chat channels of the server, maybe in future we can look into it.
Thanks, I'll be looking forward to setting up and restoring the rank increase in the local community again
There are no plans for it yet but your suggestion has been noted.
Okay thanks for the note
I was automatically ban from official Injective telegram group right after join the group. I am requesting that please unban me.
You can DM me with your telegram ID
Please Check your Dm
Again 2 times ban suddenly after tap on join
Many of my Pakistani colleagues are facing the issue of being automatically kicked from the Injective Telegram group immediately after joining.
Try again now.
I also faced the same issue when I joined the group from my other 2nd Telegram account. Please resolve this issue and unban me from my 2nd account.whose username I DM the concerned Community Manager
Yeah it's solve now
I cannot cancel my injective bot..says insufficient funds when I attempt. I have tried over the past week...no luck. any ideas???
hey can you send a screenshot
https://injective.notion.site/Injective-Exchange-Service-Setup-Guide-7e59980634d54991862300670583d46a
can i download and sync only Indexer, without Exchange and Chronos?
Also is there possibility to get block data, do smth with that data and then delete this block?
hey try asking that in the builder channel
You can get access by going to #🎴︲get-roles-here and selecting the role there
I have question about wasmd.
Which version of wasmd is used in injective chain?
Where can I query this info?
Hi, please check the message above your message.
You can check here ↑ then ask in → #🚀・dev-support
What is the legit inj. Wallet?
I personally use leap and keplr for most, but you can see a list here: https://docs.injective.network/learn/basic-concepts/wallets/
Many Thanks for your answer
How to make 3 transactions on Injective
3 transactions? Perhaps swapping on https://helixapp.com/ would be the easiest
Hellow there, I am trying to bridge from inj to inEVM but everytime I get a "error while signing"... any idea why ?
Which wallet are you using?
keplr (with ledger)
Currently Ledger is not supported, you can use Keplr without Ledger though.
Also block any DMs you may get.
i want to withdraw ENA(injective hub),it asking inj address which wallet address should i give?
If the ENA is visible on Injective hub then that ENA is in the wallet which is currently connected with Injective hub.
If you want to transfer it to different wallet then you can enter that wallet's address and do it.
Ok fair enough, thanks 👌 , out of curiosity, is it not supported by injective or by hyperlane ?
Well, the InEVM bridge is created by Hyperlane.
It's not supported on just that bridge.
You can use Ledger fine with other dApps within the ecosystem
its visible in hub,ENA address from binance? can i give?
I wouldn't recommend that.
Your ENA is currently on Injective network and Binance likely does not supports ENA deposit on Injective network.
What are you trying to do though?
my wallet comprimised so USDe(injective) from ethena convert to ENA and i want to save the fund
Ok thanks for your help
So, you swapped your USDe on Injective network to ENA, now you want to save those funds?
Or move them out to be more specific?
Then you can go to the wallet page of Injective hub then use the transfer iterface there to transfer the ENA to another INJ address.
The INJ address you enter there can be another INJ wallet which you have access of.
Do not enter CEX INJ address there.
keplr?
Yeah sure
so will it relect as ena or will convert to inj?
It'll transfer the ENA to the INJ address you enter there.
Then you can connect the INJ address which you transferred on Injective hub to access that ENA.
Not any which I know of.
ok i need to swap to erc20 then move out,is it?
You can
Or swap to something on Injective which is supported by CEX.
For example INJ or HDRO
I have a send 55usdc to your USDC contract address I have back my fund or not back
You sent it to contact address?
If yes then there's no way to get them back, sorry for your loss.
Also anyone who sends you DMs or friend requests is a scammer so block them.
Tnx for response but why not back ?
Because no one has access over funds in contracts.
Ok
You shouldn’t have sent them to contract address buddy
Whats wrong with that guys I can not trade after this update
no funds but i got funds
Send me a screenshot showing the wallet that tou currently have connected
You can send it on dms
I made a bridge between Polygon and Injective through the official bridge on Injective Hub and there was a failure in the contract, what do I need to do to access the money? I have enough gas in both networks.
can you DM me your addresses
What kind of announcement, can you let us know some details? Will there be some progress between Coinbase and Injective Network?
Just make sure to keep everything on record if it happens to contest it
it is
@dire sail is sending me invites for just a question pls ban
Thanks a bunch D4C i got over 9 fake channels which was sent to me.
Thanks brov
Quick question for any Injective team members. When I bridge my inj to my eth wallet, I sign off on meta mask and then do so on my ledger. On meta mask I can see the eth address I am sending too but when I finalize in my ledger, I cannot see my eth address (there are other message notes but I see no meaning for me). Is there a way I can also see my eth address in my ledger so I feel much safer when bridging?
I was thinking possibly I should connect my ledger directly rather than use my metamask to then interface with my ledger. Would this do it? I want to be able to feel way more comfortable moving my money to my eth address and see it in my ledger
Hmm, you can check with directly connecting ledger.
Ya my first guess was maybe that would do it. Are you able to check on your end if that is the solution or another way would work?
(I just moved my staking rewards so I have nothing to bridge for another month)
Just want to feel way safer in future when moving money rather than cross my fingers the esoteric values in my ledger correspond to sending to me eth address.
Oh, I don't have my ledger on me right now, so can't check.
If you're using Metamask + Ledger and it shows you the address in Metamask while signing then very likely that's the same on you're signing for in your Ledger unless Metamask messed up in some way.
Yep I agree 99% of the time. Just want to remove 1%.
Why I don’t use MM solely in the first place. If you are able to confirm with another team member on the ledger only piece or a way to see the eth address in the ledger too when bridging, I would appreciate it.
Thanks for your time.
I mean, you can check when you're actually trying to bridge, if it shows your address then there you go with your confirmation.
i used inevm bridge but i havent received the funds yet on inevm network from injective
i need help @lime sun
How long ago was the bridge?
If anyone sends you private messages then that's a scammer btw.
1 hour ago
What's the Tx hash?
noted thanks people posing as you just did
please hold on
but i am not receiving the funds on either injective or inevm
1000$ is alot to me
Where do you have yet to receive the funds? On your Injective wallet or your InEVM wallet?
injective wallet
Can you wait few more hours, and if it still doesn't arrive then let us know?
okay how long please
Maybe 2-3 hours
Okay, let us know if you still don't receive it.
okay thznks
yo, any mods here? i need help with bridging assets from Injective back to ETH mainnet
What's the issue?
I'm trying to bridge ZIG on Injective back to ETH mainnet. Old bridge is not working, new bridge I dont really understand how to do it
Connect with your wallet on the new bridge page
Then click Withdraw, and click on USDT to change to ZIG
which wallet, my injective one? i have leap
You can't use that wallet if you want to use Ethereum bridge
which one do I use then
You can do it like this - Take your seed phrase from Leap, and add in your Metamask wallet, in that way you will make them compatible i.e you will have one INJ address for both wallets
then connect with your Metamask, and make a bridge transfer
it's unnecesarily complicated lol
everything is connected. Does it have to be bridged to the same wallet?
It's not complicated, you just can't use the Ethereum bridge with Leap wallet as I said already
Send me a message in DM and we will try to make a transaction together step by step
I imported my Leap wallet to Metamask and connected it
And now you have same INJ address, correct?
INJ address is same. I changed the destination address to another one of my ETH metamask wallets as I'd like to send it there
You can do that as well
Click on this
and change to another ETH address
nice ty
@lime sun still the same I still haven’t received my bridged tokens
Can you send your INJ Address, EVM Address and transaction hash? Also please explain everything you did.
What I was said to you @lime sun, the newcomers prefer to increase their rank while staying within their own people.
why focus on rank rather than real involvement and contributions
I am not forcing you about rank but I have tagged you to note this
got it ser
I really agree with you that rank doesn't matter, collaboration and involvement is everything and meaningful
Okay hold
inj1e98aud4l36huwcv7k4gxntwem7hd7643a3atww
0x2Fd5689b19721de14022aF7727c186575F9C8Abe
My injective and evm address
Please @lime sun help me look into it
Basically, you transferred from InEVM to Injective and they still didn't arrive?
Can you give the transaction hash as well?
I have this same issue
What's the transaction hash?
0xf4a2b36adde3feeee230656a5fc45eb76c102ce53efec00210e2853d9cbb5ca4
I’m trying to send it out and I can’t find it in my wallet
Is this address not yours? inj1ug2jge70l4wtye35z0w4sjmugagl25f2lyrvm0
It is
Look
If it is yours then, if you're using Metamask then connect to Injective hub with this address: 0xe2152467cffd5cb2663413dd584b7c4751f5512a
If you're using different wallet then just connect using that wallet to Injective hub and you can see your balance there.
Can I send to a cex through the injective hub ?
Yes, there would be a toggle to enable memo on the wallet page of Injective hub, enable memo and then enter the correct memo while transferring to a CEX.
The issue is probably with Keplr then
Thank you so much
I scanned this wallet on inevm explorer and it showed zero ink
Inj
That answer was for someone else, can you please provide your transaction hash?
This transaction is of 0.5 INJ.
Which has arrived in the destination wallet.
No I am referring to the transaction of 46.2 ink
Inj
My bad let me send it
@lime sun @mystic zephyr i think the bridging failed from injective to Inevm i dont know why i didnt receive it
You didn't receive it on Injective right?
i didnt receive on inevm
You did, then you bridged it to Injective
yes then i bridged back from injective to Inevm and i havent received it since
i tried a small balance of 0.5 it went through
but that 46.2 from injective to inevm didnt come in at all even though it registered the transaction
Inevm address0x2Fd5689b19721de14022aF7727c186575F9C8Abe
inj1e98aud4l36huwcv7k4gxntwem7hd7643a3atww
my injective address
Got it, will check with team.
okay i will be expecting your feedback i dont why this is happening
i made an observation @lime sun that their is no contract process transaction on my injective wallet on my injective wallet transaction after bridging from inevm to injective? i think injective has not process the bridging tramsaction on my wallet r what is going on
^^
Shouldn't be an issue though, will let you know once I hear back on your case.
okay when should i be expecting an update
No ETA honestly, feel free to ask again if you wish.
New here . How get ninja role?
You already have it.
okay i will message again in the next 3 hours
You'll need to get the knight rank first
Have you resolved my issue @lime sun
Nope, no updates on it yet.
Can you reach out to Hyperlane support as well so that they can check as well?
Okay thanks I will
Since the bridge was done through Hyperlane so they might be able to better check the issue.
Okay I’ll reach out to them but I used inevm bridge
cant find omni network on keplr wallet.
how do i bridge OMNI tokens to ETH network?
You can use the Injective bridge.
Will need to use Metamask though.
Ah ok. thats what the comment meant. i searched for answers but was still confused
Since bridging to Ethereum cannot be done through non EVM wallets like Keplr for now.
Got it. Ty fam. Will import. Unless this a sign saying not to sell OMNI yet lol
Haha, sure, let me know if anything else.
Also block anyone who sends you DMs btw.
They are scammers.
What options do we have for setting a multisig wallet on Injective?
Was using Apollo but they don't have support for Injective anymore. Saw Desig, but apparently it's early access and you need to get their wallet?
Yes bro
just joined and haven't known what this place is all about anyone to help me understand.
Something wrong with hinj pair on helix , a ui issue check it please
What exactly?
Chech the pair its clear
Yeah, it has already been reported and its being worked on, just confirming if it was something else on your side
Thanks
Just desig for now AFAIK, stay tuned.
I did a trx from INJ Hub to Kucoin. I withdrew USDT to the INJ Chain wallet on Kucoin. Unfortunately I did not receive the funds within Kucoin because the only support INJ on their INJ chain Wallet. On the Injective Explorer I can see my USDT on their INJ chain wallet. Kucoin told me they cant do nothing and also cant refund eventough I wanted to pay for the service. Can you help me somehow from the Injective site? I am kind of sad about the Kucoin support as I am pretty sure they can open their INJ chain wallet and do a refund very easy. Any help? :/
thx
SCAM
Unfortunately only Kucoin can help you regarding this and anyone else claiming to be able to help you is a scammer.
thx. good to know. sad anyway 😦
This is sad keep contacting them until it is positive
How many people get selected for the Knight role in the INJ Ambassador Program each month? Sorry for asking repeatedly.
5 every week 20 every month
please are there any plans to support the inevm chain because I made a deposit from it on bybit and I can't get my funds back. I contacted bybit support several times but they refuse to retrieve them each time the same message
https://inevm.calderaexplorer.xyz/tx/0xf2a205aa3e993e34129722f6978d559a13e14ca839b8a48a2f3907ea5cb56257
sadly its ultimately on their hands and if they won't budge there's nothing we can do.
hey,my staking Validators look inactive and one of seen ''jailed'' so I CANT UNSTAKED.WHAT THAT MEAN?_? HOW WİLL I COME BACK ALL MY İNJ TOKENS?? THERE İS ANYBODY İN HERE FOR THİS İSSUES??
you didn't get jailed, the validator did
try to redelegate on the hub https://hub.injective.network/
THERE ARE JUST REDELEGATE AND UNBOND OPTİONS!! ı CAN SEE THERE UNSTAKE OPTİONS. HOW CAN TAKE BACK MY COİNS??
Moreover, I did accidentally UNBOND ( Because I understand this as Unstake !!) TO JAİLED VALİDATOR!!
Redelegation is instant, just initiate the unstaking after
WHAT A WEİRD İNTERFACE ON THE HUB!!
I CANT FİND UNSTAKE BUTTON!!
ok,thank you .. can I will take back my undonded tokens from "jailed validator" When it expired
The unbonding period is set up to 21 days
yeah,I see it.and after?
You will get your Inj back in your wallet next time I will suggest to do liquid staking if you need your INJ to get back instantly
After staking

undertood now,thank you. I was just anxious when I saw that "jailed" notice on my token's validator

Don't worry your inj are safe

thank you so much zenon.you so kind

@pure gale
Am here
how much were you trying to bridge ?
18dollars
Did you had it in USDT? or eth?
Usdt erc20
every attempt to bridge faild so it didn't go through
the bridge has a fee of 50 usd how the bridge works is that it discounts it from the balance that is being transferred
as the transferred balance is bellow this amount it doesn't goes through
this is your current usdt balance
Yes
i would advice you using an exchange like binance or kucoin where you can deposit the erc20 usdt then BUY INJ and then withdraw directly to injective network
I want to swap a coin on the helixapp would that be possible
with that balance you can't just bridge over from eth chain
do you have any account on an exchange ?
Because the helixapp state you have to bridge with injective Before you can use the app
oh no that is to be able to bring your balance over but is not a requirement
Pls I bout a coin from an exchange I need to swap on helix do I also need to bridge it before I can swap it
didn't understand your questions please can you rephrase ?
I want to swap a particular coin on helixapp to usdt what should I do
again do you have an account on kucoin or binance?
Yes I do
ok then you can deposit your USDT then BUY INJ on that exchange and withdraw that INJ directly into your INJ wallet
Ok thank so very much I thought you must bridge to use the helixapp
no worries let me know if anything else comes up
Ok thank you sir
Pls I need help on the helixapp I can't transfer ERC20 token the address says invalid
please don't dm anyone
no you can't as helix is not on eth chain is on injective chain
di you try this?
arab16560
I have an erc token that I want to swap to usdt
ok where do you have it
I have the ERC metamask
on ethereum chain? right?
Yes
ok so still same as before, you need to either bridge but as stated before it costs 50 USD so you won't be able to do so
or
you can deposit your USDT Binance or kucoin then BUY INJ on that exchange and withdraw that INJ directly into your INJ wallet address
To know what is the Injective address that is related to your metamask you can connect your wallet to
https://hub.injective.network/wallet
It will show your Injective wallet address (starts with Inj) on the upper right corner.
Can I bridge any ERC 20 token or I can only bridge ERC20 Usdt
you can only do the second option, you need to check that the token where your funds are allocated is accepted in the exchange that you are going to deposit them into
Because I have the coin I want to bridge but I can't find it only the Usdt ERC20 token is showing
Remember that the flow for the solution that i think fits you best is
Your wallet -> Binance or Kucoin -> you Inj wallet address
this will allow you to move the funds across different chains while minimizing fees but you have to make sure that the exchange where you will deposit the funds accepts that token
as you need to use those funds to buy INJ before withdrawing to your inj address
If I have for instance let's say I want to swap ERC20 CRV token on my metamask can I swap it
Using helix
CRV is not supported on helix and you can't bridge CRV to Injective network which is where Helix is built
Last question sorry for your time I have BlACK token ERC20 on metamask I want to swap it to usdt what is the procedure using helix
can you please share the wallet address where you have the black token?
0x7D904845E2D6fc9a84e53A0d8bD5C67BC7f18F10
That token is also not supported on helix
Coinmarket cap shows it's trading
yeah just saw that but looks like is not accurate
the only black token is black panther
Ok I will swap with injective token to Black and give you a screenshot
please do
I have been scam it's a different black
I just wasted money swap from exchange to Dex the whole day
sorry to hear that mate
sounds awful
Be careful out there lots of scamers
Thank you. He could not get money from me apart from the different swap bridge he made me do confusing me
Does failed bridge would I be refunded
no it won't
I appreciate Ur patience
np
Connecting hub injective to my MetaMask I know get “no active wallet found”
It use to work? What to do?
what brower are you using? hard refresh (ctrl+f5) then try again. Also try clearing the cache
Try in a different browser; it will work.
And i recommend to update your metamask in this browser
I’m using Crome, cleared the cache. Still the same
@spare spindle
do you have multiple wallets extensions installed? you might need to disable them momentarily
Ok will try thanks
I think this is why this issue has arisen

Have you fixed that
What's the issue?
After speaking with keplr support, they tell me relayers are not active
Oh, the Dymension one?
Yes
If you're getting any errors then can you send a screenshot?
I don’t really understand by was told the relayers need to be. 0-0 and they are not
Got it, will ask about it.
If you can help would be great
Sure, in the meantime please block any private messages or friend requests you may get from ANYONE.
Unfortunately no.
It's likely issue from Dymension side afaik.
Just checked and their side of IBC channel was closed.
I was told it from the inj side
Not really, the transaction is going through from Injective side but it cannot be received from Dymension side.
Strange, will check on that as well.
From the last time I checked, the transactions were pending on Dymension's channel.
This has been going on for about a week . I’m worried that it’s not going to be fixed
I can’t do anything with my coins until it is
if i want to transfer some usdt from Injective to Arbitrum (or Polygon), what's the cheapest way? The Inj Bridge allows me to send $ARB, but not $USDT. Should I buy $ARB on Injective and then bridge it? Or is there perhaps a more efficient way?
You can bridge ARB, yes.
You can check some other bridges if to see if they allow other assets.
!bridges
These are few other bridges which support Injective network but please do your own research on them before using.
thanks. the one that seems best in terms of spread is nexus from hyperlane. swap usdt for tia, then send the tia on arbitrum, has a better spread
Would recommend using the official Injective bridge but if you wish to use others then please dyor on them before using.
that's my attempt, the official one, but not having the option to bridge stable and losing around 1.5% in spread is not ideal
You don't really lose any amount when you bridge, for example if you bridge 1 ARB then you'll receive 1 ARB.
The only possible reason for any losses could be the price impact and the gas fees.
yes the price impact makes you lose some.
would be great if injective would have a stablecoin bridge, also for liquidity purposes
I just wanna make LP token Locker on INJ, How can I do this?
Any online doc here?
You can ask directly on the #🚀・dev-support for those kind of questions to be able to join that chat go to #🎴︲get-roles-here and choose the dev role
thanks
Anytime
Injective team I've been looking on the docs where can i find what contract is being used here.
https://www.tokenstation.app/distribution
on the injective docs
#🎴︲get-roles-here You should get the developer role and ask on the #🚀・dev-support channel
need help
i sent from binance to bybit inj and they are not showing up
with injective network
what can i do
no i dont press links
did you enter memo?
you can reach out to bybit support and they'll help
no one else can help you
let them know all the details
Can anybody help me with getting my INJ BEP2 on to the smart chain or at least out of the wallet it's stuck in currently?
It's currently on a safepal wallet, but I can't seem to find any way to get the BNB BEP2 tokens to pay Gas fees and get it off of there at this point.
hey first be careful if anyone dms you pretending to be a support member
so you have no BNB to pay for gas fees on that wallet ?
None & everywhere I have found with a potential way to get any sent to that wallet hits a blocker when I try to get a BNB wallet for the Beacon chain due to whatever local regulations are being sorted out.
well the only option would be to deposit those INJ on BSC to binance and you need bnb for gas fees
Understood. Thanks Fiorento 👍🏿
Worst case I can just tell myself "it was only 30 dollars"
* 😂
How can I open a ticket? or should I just ask here?
You can ask here.
thanks
yeah yeah I know, Appreciate it
So, I had a bot open kvUSDT/USDT and I did not check it for the past month. Now, it says the bot ended due to "market conditions not supported" but... I do not have the funds on my wallet, I do not have the position open so I could close it, AND I am earning rewards.. Actually in my portfolio I can see I have the value but can not find the assets....
Can you DM me your INJ address?
sure
I can't seem to be aable to send messages to you
Do I have to add you as a friend?
You can send a friend request first then try again.
Ii made a huge blunder. Sent approx 200INJ to BSC INJ token address instead if my MM BSC address. I guess it is a permanent loss.
You mean the contract address?
Is this recoverable any way?
Yes
What's the address you sent to?
0xa2B726B1145A4773F68593CF171187d8EBe4d495
Okay yes, that's the INJ token contract address.
Unfortunately it's not possible to recover it.
Sorry for your loss.
😒
Also if anyone claims to be able to recover it or sends you private messages/friend requests then that is a scammer, please block them.
Sure. Thanks for heads up.
I bridged some usdc from solana to injective through portal bridge and now I have Solana USDC (wormhole), which isn't showing in my keplr wallet extension, I can only see it when I check https://hub.injective.network/wallet.
I don't know how to get it to show in my wallet extension, I have tried adding the token manually, but I need a contract address (and I can't find Solana USDC (wormhole) on coinmarketcap).
Due to this reason, I am unable to see this token as part of the options available to swap to the native injective usdc on helix.
I really don't know a way out. Can you suggest a way, please?
Thanks a lot
You can use the contract address yes but that USDC has no liquidity on Injective so it'd be best to bridge it back and bridge SOL instead.
Thanks a lot for the response
Ok,
- I would bridge it back
- Then bridge SOL to the injective network.
Then, of course I would have wrapped SOL on the injective network.
Ok, my next question will be, how do I get the wrapped SOL to show in my keplr wallet
I'm newcomer to injective.
I'm looking for the way to verify signature returned from injective wallet (Keprl, Ninji) but I can't find any document about this process. Are there anyone who has experienced this feature?
You can ask in #🚀・dev-support after taking the Developers role from #🎴︲get-roles-here
I have bridged the wrapped usdc back to solana.
Please, how can I bridge sol from solana to usdt on injective, successfully?
Use the same bridge and select SOL under From and it should be WSOL under To.
Ok, thank you
Then,
how do I get the WSOL to show in my wallet?
and how do I swap WSOL for USDT on Injective?
It should show in Keplr as far as I remember but if it doesn't shows then that means Keplr doesn't supports viewing it, it should still be visible on Injective hub or wallets like Leap, Ninji, etc.
You can still use Keplr to connect any dApps and trade that WSOL though even if it doesn't shows there.
Ok, I am trying that out now..
Thank you
It worked 😍
I am grateful, thanks a lot
I am getting the following error when I try to execute a transaction using the Injective Hub and Metamask: "The transaction failed to be included within a block on time." Anyone else experiencing this or know why I may be getting this?
Which action?
Signing any transaction. Even just sending one INJ from one wallet to another as a test gives me this message.
Can you try again with a different wallet?
It looks like the Wallet Guard extension was causing the issue. I bypassed it and I can now sign transactions.
Is this the correct place to ask about a problem I've had trying to bridge funds into my INJ wallet for this first time?
yes
yes how can i help you
I tried to bridge from MATIC to INJ wallet, it went into the wormhole but never came back out. I have tried to claim the wormhole tx via the new and old bridges and it just says "Bridge transaction not found, check that you have the correct chain and transaction ID"
(I definitely have the correct tx, and there's no other chain it could be)
thanks for the explanation can you paste the tx hash here ? also the destination wallet address
TX (Poly): 0x0eadc5264b5ca28cef4967bf845ebff21597c512582ad529392318a1c41ac726
INJ: inj16twttnz8avtjrpql2yfcnen4w4cyj20v2qhzq3
thanks just a moment
check your inj wallet now
check it on https://hub.injective.network/
Okay, I can see the WMATIC in my Injective Wallet. There is action required and apparently I need to migrate it using the new bridge
However when I try to migrate using the option on bridge.injective.network I get the following:
no need to migrate it
you can trade it on https://helixapp.com/spot/wmatic-usdt
I went to trade it, but showing no balance in Helix. This is the correct wallet.
go to https://hub.injective.network/wallet and see if you can convert it from CW20 > BANK
there should be a convert button next to it
Negative, no button on the page. The "action required" takes me to bridge.injective.network to perform the migration
thanks will report to the team and will keep you posted
Thank you, you've been very helpful so far
I still haven't found the solution I've been looking for for a few days. I cannot get back or exchange the tokens I sent to injectivehub via IBC. I need help from an administrator
Will ask about the issue again, will let you know.
Also block anyone who sends you private messages, they are scammers.
ok, then I will wait to hear from you. I hope the problem will be solved before too long.
i wish to send USDT that I have on the HELIX app from trading INJ/USDT. Can I send this USDT to e.g. my ETH Metamask?
Yes, using Injective bridge.
!bridges
These are few other bridges which support Injective network but please do your own research on them before using.
I'm a bit newb but I can't work it out. Right now I have a KEPLR Wallet with my INJ (can't see my USDT on this but only in the Helix App) and a ETH Metamask. Would you mind just saying the steps because I'm missing something.. Thank you 🙂
You can do any of the following:
- You can either import your Keplr to Metamask and then use the bridge with new Metamask account and change the receiving address to your main ETH account.
- You can connect your Metamask to Injective hub or Helix or Bridge and you'll see your INJ address associated with it, transfer the funds to that INJ address with some INJ for gas and then bridge using your main Metamask account.
For bridging, just go to the bridge page and select Withdraw then select the destination to Ethereum and then you can bridge through there.
Ok, excellent. thank you for your time
Error happening during sell order [ Invalid Zero amount - in screenshot ]
If I enable auto sign it says Authorization error
- Happening in Subaccount 1
Which pair is this on?
hinj/Inj
I created new Sub account but still same error
Can you send your INJ address and the full error as text? Will report.
Also the steps to replicate it.
Invalid zero amount: execute wasm contract failed [!injective!labs/wasmd@v0.45.0-inj/x/wasm/keeper/keeper.go:401] With gas wanted: '50000000' and gas used: '165878'
Happening when selling hINJ in Sub account , In Main account order can be placed [ INJ address is not useful since happening in new wallet also created for testing on diff device ]
- Transfer hINJ to Sub account and try to place limit order
Thank you, may I have your INJ address please?
Help
Can you try from dekstop, please?
Okay, If there are still problems, I will report back. Thank You
How to connect guild with discord?
you probably have to sign in and then connect your discord account
I am getting this
make sure you complete your profile, also please reach to guild directly for assistance
Can someone look into this wormhole transaction. i sent it during high congestion and i was never able to redeem it. now when i try nothing happens. can someone please help?
A6FA79C67E73A13E47625ED1B357E62C7D39AC0838DF03D78171605A3D9B3CB9
Gimme a minute to check.
Please block anyone who sends you DMs.
83Ex9XFgna6gf1e2tMmt6SxvFZ1Vhy5eWhohCtrmwW1b
Is this your SOL address?
yes
No, I mean when you go there, just click recover, without pasting the hash.
It should let you do that without doing anything
doesnt work, says guardianSetIndex != config.guardianSetIndex
Strange, in that case try reaching out to Wormhole support so that they can check what the issue might be.
copy thank you
How can I remove my farmer role I can’t rank up
I can remove your farmer role if you want
why can't i get a role if i mined nft on guild?
Click on your nickname, you already have roles
Is the injera team doxxed?
Please ask the injera team directly
I don't think injective should engage them so much without prior investigation.
These engagements can be seen as endorsement and if they are scammers, people will blame injective
thanks for the concern and feedback will pass it on to the team
It's really important please.
Some bad actors can burn down what we've been building if we don't take care.
Is there a way to see my INJ transfers from my Metamask wallet? I transferred INJ to my brokerage and I forgot the Memo, but they wont find my funds until I send them a screenshot showing it was actually me withdrawing my INJ.
I showed them the transaction on INJ explorer but that isnt enough 😦
Yeah you can use the explorer https://explorer.injective.network/
search for your wallet there and you will get a tx history, you can narrow the search looking for a smimilar time transaction
You can import your phrases to any injective network supported wallet like okx and there you can see the tx hash
Oh okay! So just to double check, I'll import my metamask phrase to okx and it'll show me the tx hash?
Umm no need to do that just enter your address in https://explorer.injective.network/
As our cm said
Oh sorry, but I need proof that I have access to the senderaddress
so showing the tx hash on inj explorer isnt enough for Coinspot hahah
Find the tx harsh of transaction and click on that
And you will get the all information there
i mean you have your metamask + the tx hash
Hi!
I participate in Helix 2.0 Reward season.
On step 7 I got msg but I have trading on Helix.
Please help me!
Thanks!
thanks for reporting it!, just reported this error
Yep but Metamask shows nothing in the activity section
is happening to everybody
what i meant with that if you are showing them the tx hash they should provide you with instructions in how to prove the ownership
Ooh okay I see! I showed them my INJ explorer hub and they were happy with that so its all good now, thank you so much ❤️
no problem ser
I sent USDT from Injective hub with MM to INJ chain in Keplr wallet. I can not see USDT in Kepler but I see it in explorer. How to get access to USDT?
check connecting your keplr to https://hub.injective.network/wallet
let me know if you see it there
Lol, I am getting too crazy, did not check the wallet tab, lol again. Thanks for the support.
Haha, anytime ser
hey if you are still having issues with that send me a dm
dm"d you
the best way to switch inj to eth?
You mean bridge your funds from Injective to Ethereum? You can use Injective bridge for that.
!bridges
These are few other bridges which support Injective network but please do your own research on them before using.
thank you. some comments mentioned it took a long time. how long should i expect?
Normally 15-30 minutes.
thank you . do you suggest inj to be switched to evm directly or would it be much faster/cheaper to other evm or solana
Depends on your needs really, there's no bridging fees when bridging to chains other than Ethereum though.
ah. i see
usenexus.org/ - i just realized i can use this but INJ in my wallet is not shown on its interface
Not really aware about that bridge, best to do your own research on it before using.
If you're encountering issues with it then it'd be a good idea to reach out to them directly.
You want to swap or do you want to bridge?
Directly using Injective bridge.
i am not sure what in EVM is? it's shown on a farming guide. maybe it's just for farming purposes?
InEVM is a different chain than Injective or Ethereum
yeah
It's a chain which was launch in collaboration with Caldera and in simple terms it is a chain where same dApps can be deployed as Ethereum and othe EVM L2s without much change in code and they can directly interact with Injective network through it.
InEVM is not needed to bridge to Ethereum.
You can directly bridge using the Injective bridge.
reading... the INJ in my wallet is not shown on the bridge is that normal?
actually it's not your bridge. so i can ask them but in case you know the answer
Oh, that's the Hyperlane InEVM bridge, it does not supports Injective to Ethereum transactions.
it does work now.. thank you
Can you remove my famer role

Are there any problem
Engage normally in chat and it'll be removed soon.
What happen
just keep engaging with that community we are watching
@slate mulch What kind of timeline should I be waiting for a response to this?
Let me check on this
just pinged the team on this again sorry for the delay will keep you updated
@slate mulch, I have a question here: #📆・community-events message Can I also submit plain Injective content for each project when submitting on Google Doc?
Don't rlly understand your question there sorry
Have some trouble with Injective bridge (Wormhole connect). I need to send my W tokens from Solana to Ethereum. When I have transferred tokens via bridge I received wrapped W, which can't be used and can't be swaped for native tokens. Then I've sent it back to Solana, received it, but can't claim because of errors. As a result I spent about 10$ as payment for my token's travel and even can't claim it back. Do you mean is it good service?
do you have the tx ID? you can dm me
