#🆘︲help-and-support-old
1 messages · Page 26 of 1
The asset was Arb. I bridged from Mm.
more than 8 hours ago
Team is working on testnet because we have Chain upgrade very soon
so testnet will be back very soon
and you will get testnet faucet
Did you redemeed them?
There is a problem,sir. I was connecting every day,but after the ledger incident,it is not connecting.
Can you find out about this from the team and give information?
No, it won’t allow me too. I don’t have any INJ and the faucet isn’t working.
First of all, we are not affected by Ledger incident, and secondly you can't connect on the Mito with Metamask?
Thanks 👍🏻👍🏻
DM me with your address, i will ask someone from the community to send you a small amount for redeem
and "activate your INJ wallet address"
@mystic zephyrI connected to Mito with Metamsk and tested for more than 3 months.
And now you can't connect with Metamask on the Mito?
yeah
And now the inj testnet metamask integration is broken.
wait wait nothing is broken
Done. Thank you for the help.
There is a problem with the signature.
It's something on your end
This is in ninja blaze. Same problem when you do the operation in Mito.
Mito is fine, for ninja blaze you should ask them directly
But like i said, there is no issue with Metamask wallet connection on Mito
I also cleared my cookies but it didn't work.If you don't have a problem then the problem is me.Thank you for your interest.
Is there somewhere a guide for that?
Maybe you can google for that
but it's easy
you need to take your seed phrase (12 words) and then import to Metamask
But where to put in in MM? Add new wallet?
guys on inj hub I tried to bridge from phantom to inj and at the redeem part it says it can not locate wallet address...what now?
You most likely bridged ot your INJ address derived from phantom wallet
You now must import to a supported wallet in order to access it
i put my keplr adddress
If you put your keplr address that means it is in your keplr address
You mean you cannot see your funds in keplr?
no..empty
You can see non-IBC tokens only through the hub wallet page as Keplr doesnt support non ibc tokens to be displayed in wallet
Can you give me the address of keplr, and the transaction hash to check
need a minute
this is solana 2CjAwAZJ2ieFLqayuk4MZpNpk2fbgW6aVH5k8MjHAi74Ns8eeQkBFVLqjHviPWRvNizfrUvhCcuA97m34Ntmg6NS
inj1x2533keuk0eucf9043ms5ajy5yzelzkjaknzjs
me too i got a probleme with solana
Give me details here and i will take a look in a few minutes
inj177zx59r9a8zszs7sxzxgefxcl36sx37xxx48rn
Same as jaro
Hey the transaction was not redeemed on injective side, wormhole bridge transactions require redeeming. I just redeemed for you https://explorer.injective.network/account/inj1x2533keuk0eucf9043ms5ajy5yzelzkjaknzjs/cw20balances/
I also sent some INJ for gas fees, please check your wallet on the hub wallet page https://hub.injective.network/wallet
if you can do the same as you do for jaro as I have the same thing,
Sol addy Hww32Cy6oHThkFuqh8J61TjPSCSpKfStXM3x9g2Z7RpD
inj
inj1wcnlfvyg44gycnphtptpshwgr33caydaaydsuy
Success! The redeem transaction was submitted. The tokens will become available once the transaction confirms. - this is what i see when trying to redeem. Give it a few minutes to synchronize and let me know if it doesnt appear
Checking
Can you also give me the transaction hash
it seems I need more gas...cant redeem still
I have redeemed for you, no need to redeem now
The SOL is already in your wallet
you can convert it to bank through the wallet page and you can trade it after that
Success! The redeem transaction was submitted. The tokens will become available once the transaction confirms. - this is what i see when trying to redeem. Give it a few minutes to synchronize and let me know if it doesnt appear
can you show me...where in wallet page
heh..sorry...and thank you 👍
always nothing here 🖐️
Same
I have solana in hub wallet...converted..and transfer...but nothing
You can trade SOL on helix
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
finally 👍
😴
how long is few minute ser ?
Should not take long usually, if it persists for too long can you contact wormhole support
heh
but you didnt proceed on your side already ?
It may be a synchronization issue, on wormhole
If the issue persist after the tokens were redemeed, please contact wormhole support
but why jaro got probleme solve and not us ?
I tried redeeming your transactions too
Its not in my power to fix
i will try again a little bit later
ok ty don't hesitate to try again cause it's a little bit frustrating
@fickle escarp The problem is on your side, wormhole support say
same here
I'm trying to bridge INJ I have that is on the ETH blockchain over to the INJ chain. I'm using a Ledger hardware wallet. When I'm trying to connect it to the INJ hub I keep getting a "Wallet wallet-connect is not enabled/available!" error immediately after I try to click connect. This has happened on both Chrome and Brave web browser. Any way I can work around this?
Will try again in a bit
You are connecting via wallet connect?
Give me the INJ address you need INJ for gas fees
inj177zx59r9a8zszs7sxzxgefxcl36sx37xxx48rn
Yes. On the INJ hub homepage, I select "Wallet", and have selected both the "Ledger" and "Wallet Connect" option. Both have resulted in the same "Wallet wallet-connect is not enabled/available!" error popping up at the bottom right hand corner of the screen
Does your eth address have ETH in it for gas fees?
I have sent some to cover gas fees
thx hope this will fix
Yes, plenty
Can you try connecting directly with ledger live
How do I do that?
Same problem as him can you send some to cover gas fee
in hour but solve ty
i have issue with arb here's my tx id 0x960b60b4da0d5ad658ad2e54bd79467a2f04e7391f192ab05395938198ee2edb can u please check ?
It has arrived?
yeah
its pending
same issue - waiting for answer
Same issue here - "I'm trying to bridge INJ I have that is on the ETH blockchain over to the INJ chain. I'm using a Ledger hardware wallet. When I'm trying to connect it to the INJ hub I keep getting a "Wallet wallet-connect is not enabled/available!" error immediately after I try to click connect. This has happened on both Chrome and Brave web browser. Any way I can work around this?"
thx to @low mirage for sending me some token to cover the fee, one hour for this
sorry, i should have send on your wallet too
but completely missed it
no probleme ser
im having an issue with the inj bridge since last night, im trying to bridge using sol to inj on the hub. im getting an account not found error and my funds are stuck pending on phantom
https://solscan.io/tx/3hPJQsmLRygCeTkSuxBXPyfMXG4bbQ39icbe9pUvptJf3wDXzfTZ3pCiB9BatXB9MobJ5CiXAKtUEh4Ft8qFgsbU idk if this is the tx you would need or not
You need some INJ for gas fees, give the inj address, i will send some
I just redeemed for you https://explorer.injective.network/account/inj1fpz72308v0pdxpa4tgjhzn5t2dm6gjwzs4p6p5/ and i have sent some INJ for gas fees
@fickle escarp any thoughts on the ledger issue
Let me read on it
appreciate it!
how does bridging from Injective to Solana work? Do I have to first sell INJ for SOL on Helix? Afterwards on the bridging page, I can't seem to connect my Keplr wallet as the funding wallet and my Phantom wallet as the receiving wallet
You connect phantom to injective bridge for Solana, input the Keplr inj address from a supported wallet and you can bridge
any idea how long the bridge takes i got the gas you had sent but not the 3 or so sol i bridged over
Usually briges from wormhole are fast unless there is a synchornization issue
could there be another issue then this is my first time using inj or wormhole
im trying to bridge INJ on ethereum network from my Trust wallet to Injective hub so I can get native INJ in order to stake i t.When I import all the info (wallet addreses and amount ) and click set allowence, Trust wallet pops up, I confirm transaction but after that I get this message/error below and bridging has failed.
jsonrpcengine: response has no error or result for request:
Can somebody tell me what to do in order to avoid that error?
having an issue bridging sol to inj, i created a keplr wallet and connected to inj hub with my phantom wallet and tried to bridge a small amnt last night and just now and both times when i try to redeem funds it says my account is not found while displaying my inj address
is the testnet faucet broken ? cannot get any token from it
i just had the same issue, seranium said i needed gas on inj and sent me some but i still havent got the bridged sol yet
so i needed to already have inj in my wallet to bridge? wtf lol, then whats the point of bridging when i need to have inj already in my wallet???
how to convert bridged INJ on Solana to SOL? Any recommended exchanges?
i think theres a community faucet or something on inj to get small amount of gas
and not only that but on the inj dashboard it shows i havent even done any transactions but i can clearly see both transactions on solscan
Hey trust wallet has issue, please can you use another wallet from the supported ones
You need INJ for gas fees, can you send me the INJ address i will send some
ok, will do so, thanks
ok thanks, my address is inj1ju9qylzf903ehud9njq2l9fu6p3j83966vchxy
You are briding to a blockchain, gas fees are mandatory
I made a bridge with arb to inj, but when i redeem i got the error "kplr doesn t support injective network",
i assumed that it would be taken out of the sol i was bridging, i guess i was mistaken but thanks for the help
Done i have sent some for gas fees
Can you try again
Let me know if you have any issues
The dashboard on injective shows only transactions on injective blockchain thus why you dont see any
anyone can help me please, this is my th : 0x0dc787c52424a15ffa22d2378f0d7767e333c8b5f8f69f7b9503c464d80a5d50
bumping this up. What INJ pair on solana has good liquidity? Otherwise I might bridge to ETH instead first and then to SOL
seranium this is what i get now when trying to claim the wormhole tx after u sent gas
it says already executed but i dont have the bridged funds and they are still pending on phantom wallet
thanks again for the help, all is good now
Can you send me the transaction hash, and the address that you are connected with
From which chain did you bridged?
https://solscan.io/tx/3hPJQsmLRygCeTkSuxBXPyfMXG4bbQ39icbe9pUvptJf3wDXzfTZ3pCiB9BatXB9MobJ5CiXAKtUEh4Ft8qFgsbU
8bwEwCyAWghi4i18z5JHN3ZHLJU6QWhMdtxP8MAsTKz9 sol wallet
inj1fpz72308v0pdxpa4tgjhzn5t2dm6gjwzs4p6p5
thx, i bridge arbitrum to injective and i use injective hub
Hey i have redeemed for you - https://explorer.injective.network/account/inj1y947035m9ryvqmgcwvszdtdcqgzhvkqxnyepp4/cw20balances/
Check on the wallet page on the hub, next you need to convert it to bank and then you can trade it on helix
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
It says that it is already executed
check my inj wallet the funds never came idk why
https://explorer.injective.network/account/inj1fpz72308v0pdxpa4tgjhzn5t2dm6gjwzs4p6p5/cw20balances/ the funds are in this wallet
i can see them
they are thre
please go to the wallet page and you will see them
oh how do i used the wrapped sol or get it into inj sorry im a noob
ok, i see the arb, thanks a lot, but i got the msg when i convert: "kplr doesn t support injective ..." , which wallet can i use, please ?
You need to convert it to bank so you can use it on injective exchange dapps to trade
When redeeming on injective on the hub?
ARB uses metamask
You can import Keplr to Metamask and vice versa
you can have the same wallet address in both wallets
yes this is , what i have metamask and kplr, but when i click convert , it said me not to use kplr
This should not be a problem, I am usually using Metamask on the hub most of the time
Need to test it with keplr
yes, me too ! i m looking for
whats a good dex i can use my price impact to swap $200 of sol to inj on astroport is like -70%
https://helixapp.com/spot/sol-usdt check on helix
Helix is an order book exchange
Keplr has native support for injective
yes i know, so why i get this msg ?
I am also having issues with Keplr to convert while with my metamask i have no issues at all
I recommend using metamask, for the time being
You can import Keplr to metamask and have the same address
yes, i do that, thanks 🙂
I have a problem depositing into helix going to a wrong account
it somehow linked a wrong address. I was able to execute the deposit (it was showing up in the account tab). But when trying to execute a trade, I'd get an error saying that the connected address does not match
Now I have the deposits sitting in some random account that I don't have access to. When refreshing the page it connected to the correct address and shows zero balance.
I'm totally lost, don't even know where to start troubleshooting. Any help is appreciated
Do you have other wallets installed?
yes, already tried connecting to them to see if any matched the deposit address. But unfortunately that was not the case
Do you have other wallets address in the wallet that you are connecting to
Can someone tell me the best way to bridge from sol to inj please
@fickle escarp @strong bobcat 3 days now and I've gotten no responses from anyone on how to tell how much INJ was claimed as part of a staking reward claim transaction by using the Injective Explorer or any other means. I need this for tax purposes and have reached out to the people and forums you've directed me to with no help. Can you please direct me to someone that will take at look at this simple request?
also already tried if any of those match
the weird thing is actually I don't remember connecting a wallet before making the deposit. Could it have been some cached address? It wouldn't make any sense though
so what happened exactly is:
i) I opened helix app (cannot remember confirming the connection, but it might have defaulted to Keplr)
ii) through the deposit function, transfer ATOM from Cosmos Hub and transfer INJ from Osmosis
iii) balance shows up in the account
iv) trying to execute trade, gives error message that connected address does not match
v) refresh page, now my usual wallet address is connected and the other address nowhere to be found
you can bridge through the bridge page - https://hub.injective.network/bridge
Hey, i have already tagged a person to help you, please have patience
the other address must have been detected from some of your wallets, please check all of your wallets and make sure to always double check to which wallet address your are transferring
You asked Achilleas to take a look the other day but I doubt he will initiate a conversation by forum rules. I did ping him with the transaction information the other day but didn't get any acknowledgement it was received or he will take a look. I am patient but lacking the confidence anyone is really taking a look considering how many difficult problems you all have solved in the forums already in the last several days.
the address was never used before though, which is also weird
I can find it on the block explorer and the only two transaction on any cosmos chain ever were the two deposits I've made
and while trying out different wallets now I actually found a bug. If a wallet is connected in your UI and the extension is subsequently disabled, the connection doesn't break.
So this means my earlier question about cached address could actually be true. It might be the case that I connected with a different wallet a long time ago that might no longer be in use. This address would still have shown up on your UI, even if the wallet extension was deleted.
This is very bad and unexpected behaviour tbh.
which now means I have to go through a pile of old wallets or extensions I might have used in the past and hope to be lucky enough finding the correct one :/
It's amazing how many scammers come running when you have a question. Geesh.
I will report it
please block and ignore, you can report them in #🚨︲report-violation
I bridged some SOL from SOL to Injective with Wormhole and I can see those Wrapped SOL on Injective Hub with the option "Convert"
However when I try to convert, it says "The public key is not valid", any idea why (I only have 1 wallet) ?
Are you connected with the correct wallet address?
To which address did you bridged also do you have INJ for gas fees?
Yes, same address I sent to, and I have some INJ for fees
Can you try cleaning and cache and try again
Damn, I'm sure I did that few min ago, wasn't ok, did it again and it went through 
Sorry waisting your time, thanks for your help!
Most likely is a cache issue, need to see if i encounter any similar problems with keplr on my end
how to open tckt
hi, how can we help you
i bridge to inj from solana i send solana but didnt recve inj yet
used https://hub.injective.network/bridge/ this bridge when i contact wormhole discord they told me to contact u
hi, what's the txid?
when i try reedem my fund its shwo like thi s
reply fast sir i miss 3x bcoz of this
@strong bobcat also waiting on a solution
@strong bobcat bud we need yo w8 for 1 month to apply to knight or can i apply ?
very poor response and late response from the team
You need to be a Warrior for at least one month to apply for Knight. With proof of work to your name.
checking
need to claim with the INJ address it shows below
Can anyone help me with the bridge? It keeps tell me I have missing or wrong params. There is only (1) input, the amount.
hi will check
but it not claimable
send that wallet address, wil send you some INj for gas fees
inj1nacll9rfmnul20ugnuht9jx8l70xhqd4jqc4ph
send it fast plzz i need to buy kira before 50M
done
Happens after using "set allowance"
its shwoing like this
set max and try again
let me try claiming for you
no option pops up to adjust this
thank u bro
is this bridging INJ from INJ to ETH?
bro plzz do now
bridging INJ from ETH to INJ
You can use Ethereum (Peggy) bridge on the Injective Hub: https://hub.injective.network/bridge/
There is video tutorial for help - https://www.youtube.com/watch?v=SspkXnldqHc&t=1s
A unified interface for Injective staking, governance, insurance funds and wallets
The Injective Bridge is now live on the Injective Hub! You can now bridge any ERC20 token to the Injective Chain using the secure cross-chain Injective Bridge.
- The Injective bridge enables lightning fast transfers and is one of the cheapest solutions on the market today (average transaction cost of ~$0.02 when transacting on the Injective Ch...
cannot claim for you sorry, you will have to do ti yourself
txid; GGPUoCdN7xzUkgaJYTBo374Mknmf4PrQvj7PutVpKc9HR1sjnTpNnWzRqqbxJv5gMAofyTV28J32foBrr5zeS9U
make sure to claim with; inj1nacll9rfmnul20ugnuht9jx8l70xhqd4jqc4ph
how to do it
ahh its a wallet UI issue. Not all have allowance functions it seems
do i need to put anything in memo ? @strong bobcat
no
you are not claiming with the correct wallet address
clean cookies, connect and try again
sorry for the trouble
@royal pivot scamming ppl, probabaly create a new account soon though
banned him, ty
have a look i have single wallet
yes but you have connected to wallets, the hub also reads metamask
make sure you are only connected with the one you need
guys scammers are lurking...anybody needing help they will approach you
i connected only keplr
what browser are you using?
chrome
How do I stake inj
then i send
Where to Stake - https://hub.injective.network/staking
Here's the Staking guide - https://blog.injective.com/injective-hub
How am I sure it’s real pls
NVM i stand corrected. I tried a few different wallets. Appears to be a browser issue.
wht i can do know
this is me, can dm me if you want
Fine in chrome no good in firefox. Can this be checked?
did you manage to bridge?
chrome is best for a better user experience
I'll use chrome for now. But I don't use chrome. So really it's worse for me, I am a FF user
@strong bobcat
there seems to be an issue when you are claiming for some reason, are you on mac or something?
no m on lappy
I still wasn't able to retrieve the funds
is it possible to translate the injective / cosmos hub address into evm format? that might make the search a bit easier
sorry, will have to wait a few more mins and try again then
thanks for the suggestions!
i tried it on phone too its say the same
Thanks for considering. It took me a few hours and I almost gave up. You just seeing the last 30 mins. all works now. Oh and may want more scam alerts, guys had like 4 ppl in a side thread
cant u send manually ?
Hi Mellon happy to help, sorry for the invoniences. What threads?
nope
wht to do knw
keep trying, you can try now again
I left so I no longer apart, but I've seen it before. The scammers create multiple side threads and pretend to be support. Very easy to get pulled in if one is not familiar with discord or the culture.
facts, wow didn't know this
Yeah, I only learned it just recently, I didn't know you could create those if you were just a rando..
bro its claimed but not showing in my wallet
can anyone help me i tried to bridge sol from sol chain to inj using injective hub bridge but am unable to redeem in to my kepler wallet it saying not found the address
maybe just needs time
@compact atlas @strong bobcat
@strong bobcat
check on the explorer, make sure to convert it to Bank if it's CW20 token. Then cand trade it on https://helixapp.com/markets
how long has it been?
20 min
check at the wallet section on the hub, see your balance, need to convert to Bank then trade on https://helixapp.com/markets
okay there seems to be a delay on these bridges
the cancel unbond option here.. would selecting this cancel the redelegation?
I just bridged USDT via wormhole to injective, where can I trade it?
it would cancel the re-delegation
but it saying unable to redeem and address not found
Thank you!
helix doesn't "find it" idk, shows 0 usdt
rpc issues I think, many bridges happening at the same time = many requests = delays
oh the USDT is wormhole wrapped.. how do I unwrap it?
How to add INJ token in metamask
Here's a quick guide on how to get your Injective Wallet Address:
Go to https://hub.injective.network/ and click the "Connect" button at the top-right hand corner of the page;
Select a crypto wallet to connect to Injective Hub (Injective Hub currently supports MetaMask, Keplr, Ledger, Trezor, Torus, Leap and Cosmostation);
After you connect your wallet, the address starting with "inj" on the top right corner of the page is your Injective Wallet address
is this usdt from ETH?
from arbitrum yes
Tried using the injective bridge to swap ATOM to INJ but the ATOM ended up bridge to INJ but still as ATOM. Not sure what to do to get it to INJ
we don't support arb usdt, only arb from arb
will need to bridge back
holy fuck..
My ATOM was bridged to INJ but It still shows as ATOM now but inside my INJ wallet.
yes, need to swap it on https://helixapp.com/markets
Thank you I thought I did something incorrect. So I just need to swap from where I’m at now?
yes, make sure you convert your Atom to Bank to be able to trade it
Wait this is a trading platform It doesn’t show a swap feature. I’m looking to swap into INJ and stake on keplr will this be possible using helix?
I don’t believe helix will allow me to swap to native INJ. Sorry I’m new to Injective so I’m not that good at interpreting its ecosystem.
got to the wallet section on https://hub.injective.network/
check balances
make sure your atom is Bank no CW20
OLÁ
Okay now where can I buy native INJ for the .001 Tx fee lol. The CEX I use doesn’t have native INJ
it does
still not showing anything @strong bobcat in injective hub bridge tx history, its been 40 min already and no trace of funds but i can see the transaction hash on solsacn
Hey guys, do you have issue with redemeed?
That's because you don't have INJ in your balance
Dm me with your address, i will ask someone from the community to send you
Same but the faucets are not working? Is that temporary
what's your inj address?
inj1s6say479xvh28ltjvrnhmztdf4r30d5zfy5zyv
Thanks Os
Now that I have bridge how do I swap to INJ
make sure it's bank
then go to https://helixapp.com/markets
I’m sorry I don’t know what Bank is?
go to the wallet section on https://hub.injective.network/
what do you see on balances?
can someone help redeem my funds from the official bridge somethin went wrong idk what i have enough for gas; 5nJmr8VrasQi7ZrnH1awvgLVUg3bTLoPAhUbjZ8G5Wq3L1ap86LKnNcA1Ps2fptd63rsh6ijcCCtrit14BUEw4xD #236298667
checking
thx
Nothing I see or click on says Bank
scroll down a bit
I see cosmos, see if it says bank
What do you do once you get to helix?
will check on the explorer, give me a sec, please share your INJ addresss
inj1s6say479xvh28ltjvrnhmztdf4r30d5zfy5zyv
You can use Ethereum (Peggy) bridge on the Injective Hub: https://hub.injective.network/bridge/
There is video tutorial for help - https://www.youtube.com/watch?v=SspkXnldqHc&t=1s
A unified interface for Injective staking, governance, insurance funds and wallets
The Injective Bridge is now live on the Injective Hub! You can now bridge any ERC20 token to the Injective Chain using the secure cross-chain Injective Bridge.
- The Injective bridge enables lightning fast transfers and is one of the cheapest solutions on the market today (average transaction cost of ~$0.02 when transacting on the Injective Ch...
i can see you should be able to trade them ser
bro?
should be able to claim
make sure to use this address
inj1plhgundpu7c88eku7mw2d5rmkcujh3s4s6x9gz
where can i approve it
connect to the hub and click claim wormhole tx https://hub.injective.network/bridge
What do I trade it into?
This is crazy shit
it gives this error; The public key is not valid
Show more context
I have been trying for 7 days to buy inj token I can’t do it
I got it thanks fam
that's up to you ser, there's a pair for usdt and another one for usdt inj
why?
I get to the screen, and it says from: ethereum, to: injective. I connect wallet. MM Mainnet ethereum. Can’t make any bridge.
I can’t fiat buy inj because neither works in my region.
5nJmr8VrasQi7ZrnH1awvgLVUg3bTLoPAhUbjZ8G5Wq3L1ap86LKnNcA1Ps2fptd63rsh6ijcCCtrit14BUEw4xD is the hash from sol, tried to bridge from phantom sol to keplr inj, but gave error public key not valid
I have ethereum. I want inj.
I believe the bridge is having some RPC issues and transactions can take more time, please try again every 5-10 mins unyil you can claim
try asking on #🐳・degen-chat
@strong bobcat it saying I don’t have enough to cover the fees and the faucets are not working. Can I send a $5 of BNB INJ for native INJ
Is the testnet faucet down?
I have transferred INJ from Binance to my Leap Wallet but it hasn't arrived and just says processing in my Binance Wallet? That was over two hours ao. Please advise me what to do?Many Thanks Martin
Yes it’s been a nightmare so far. I’ve never use a network that made bridging swapping this difficult
7 days! And now on uniswap and the network fee is 70-80% of the swap!! Crazy shit.
try again now
yes, under maintenance
Someone from Ninja Ambassadors is saying they're from support, is that genuine? Thx
When can it be ready again?
couple of days maybe well see
trying to convert this sol to inj
how would I go about doing this
thank you.
did you use Injective network?
please clean cach and try again
ty
@strong bobcat cleared cache and it still says missing or invalid parameters when i try to claim
How can I send this back to MM ive decided not to use Injective
oh man, will have to report your case, truly don't know why you can't claim still...
why, what happened?
Yes - See screenshot
it's still processing
will need to contact binance
the issue is on their end
The network is very complicated. And it still saying I don’t have enough gas to swap. I do appreciate you trying to help for this time.
you are using mobile, not a good exprience that way
are you using your wallets explorer btw?
No I’m on PC but the screenshots are easier to send on mobile
thanks bro--at this point id just take my SOL refunded.
Chrome browser with Keplr Ext
ok i got it, dm me on discord,let me try to 1:1 and help you
IS 2 hours normal for processing?
Thanks
new blog on how to get inj into injective network from coinbase
Coinbase doesn’t allow transfer of funds to MetaMask wallet because of region
Thx for trying
sadly, we don't provide ways on "How to buy tokens" you gotta find your way into that
👋 Team, is there anyway to bridge over my INJ sitting
on BSC to the INJ network?
There is no BSC <> Injective bridge at the moment. You can use an exchange that supports BEP20 INJ deposit and withdrawal like Binance as the intermediary. The path will be transfer your BEP20 INJ to Binance, and withdrawal native Injective from Binance to Injective.
is there a support ticket section somewhere I can share a screencap of an error I'm getting?
since last night whenever i try to bridge my INJ over to Osmosis (official injective hub bridge) it gives me this giant wall of text error
is there any other way to port over those funds? even if it's just swapping to something else and getting them off INJ/to a different asset. i tried squid but it's not available there yet
just looking for some options either way, don't necesarily need a ticket system 🙂
hmmm i'll try swapping on helix. maybe briding atom will work?
getting weird error on helix about using a ledger/that i need to connect directly
Is there a path to inj from wETH?
Thank you
i tried briding from sol to inj and im getting account xxx not found, im using keplr so idk if that makes a diff but could anyone help
I bridge some sol to inj from phantom but i cant receive mine..
fioS1PEmDgMTiBk7vxc4rvbH3TWxHd4VJuWV5nm9UwkeSiS3DeBsvhFyoT91857jhdSoip9fRjDiDBUXfMPXR82
this is my txn, someone can help...?
I bought some atom and sent it to keplr. I then tried to bridge it to inj chain. Now I have atom in my inj wallet and can't figure out how to make it inj. Also I have no inj in my wallet for gas. Hopefully this isn't too complicated
.
sorry missed your msg, make sure to have some inj to claim the wormhole tx
https://hub.injective.network/bridge
how to solve it...my 2 sol gone
what's the txid?
fioS1PEmDgMTiBk7vxc4rvbH3TWxHd4VJuWV5nm9UwkeSiS3DeBsvhFyoT91857jhdSoip9fRjDiDBUXfMPXR82
need to redeem your tx on https://hub.injective.network/bridge
yes, but not working
please use https://hub.injective.network/bridge or keplr IBC bridge
what's the txid?
i eventually figured it ty
@strong bobcat
i clicked and show this to me @strong bobcat
will check
thx
hi hanhsiang, would you please try claiming now
clean cache and try
did you clean cache?
yes
cleaned many times but still the same error..
I believe the bridge is having some RPC issues and transactions can take more time, please try again every 5-10 mins unyil you can claim
if i claimed, sol will return or i get inj?
sol
I need a support. My transactions have not been approved at the ambassador event for several weeks.
you can DM me address I will check
Sure 🙂
I sent sir
reported to team
thank you for helping.
I need support. As I followed the recent tutorial on how to move INJ from coinbase to Injective I get this error:
I have made sure both adresses are correct, and they are also automatically provided (and created by the dapp)
Need some help! I have bridged INJ from osmosis and would like to stake but I keep getting this error
"No Ethereum public key. Initialize Ethereum app on Ledger by selecting the chain in the extension"
Any ideas?
please clear browser cache and try again
There is a known issue with bridge when you use ledger
Thanks - will try again in a few days.
It will be fixed in the next chain upgrade, please follow #📰・announcements channel we will let you know the ETA soon
Ok I tried, but now when I log in with the same meta mask, the adress is changed and my 1k INJ is nowhere to be seen, seems like INJ website create a new set of adresses for the same wallet(?) What do I do?
make sure you connected right address to the bridge
I'm trying to trasnfer some arbitrum from arb to injective using the bridge. I see the tx hash in my arbiscan that shows transferred to wormhole. But when i use the has to claim the tokens, it says an error;
account inj1q59vvhjdgs2uw4hj7c90w63rjayw2e3mmcc2gf not found
hash on arbiscan: 0xb5d8b208a32b1d1ad6bca3dbaba798ea25104e3ec50a585cdb81a3dfc3491f66
checking now. In the meantime please note that admin never DM you first
done, you can see your balance now
Yeah I was using the one provided by when I connected metamask, and I could also see the injective amount when I was connected, but now when I reconnected both adresses is changed, and eth adress is one I know.
you can DM me your address I will check
thanks
thankyou, I've another tx stuck: 0x5af0f3b8ad97758c138d6ecf7bd7b1876dcd078ea309f7670ab412806f3a7538
balance should be 21 as i tried two small Tx amounts.
One for 11 and one for 10 arb.
give me a sec
done, you can check your balance now
I accepted your friend request, you can forward to my dm again
hm... I still see only 11; still missing 10. not seeing any other txs in the explorer on inj.
click "balance" section
you can see your 10 INJ
I still see 11 only:
I'm so confused, that should say 21.
because you have 2 type ARB in your wallet, please go to wallet section in https://hub.injective.network/ and convert from cw20 to bank
These are the two tx hashes on arbiscan:
0x5af0f3b8ad97758c138d6ecf7bd7b1876dcd078ea309f7670ab412806f3a7538 - 10 arb
0xb5d8b208a32b1d1ad6bca3dbaba798ea25104e3ec50a585cdb81a3dfc3491f66 - 11 arb
oh ok, that's confusing. as I transferred arb from the same source wallet to inj.
ok done, looks good now. Will I have to follow this procedure everytime I bridge? As now i want to transfer a larger amount.
yes, if any problem you can DM me
I bridged USDC from ETH not knowing that there's no available routes to swap it or use it anywhere and I'm having issues bridging it back to ETH. I keep getting an "insufficient INJ for gas fees" error even though both my wallet and the bridge have more than enough INJ. Any idea why?
thank you; also is there a dex for Injective?
you can DM me screenshot and address I will check
im having some issues interacting with the chain with my ledger connected wallet via keplr, can i get some guidance pls?
if you asking about bridge, there is a known issue when you use keplr
im just trying to make a swap from inj to a token, and when i go to sign the tx im gettin an error that i dont understand
which error please take a screenshot
you can clear browser cache and try again
still cant claim ZEN launchpad on mito?
it’s under maintenance ahead of the upgrade
that didnt work
will ask team and get back to you soon
im really confused... i have inj selected as my network, my ledger is signed into cosmos app
this is super wierd, i just sent an INJ tx to my cex, and keplr told me to open the ethereum app on my ledger. is that normal? why would a cosmos chain ask me to use the eth app?
sorry, some of these questions might be basic but im not familiar with this ecosystem, trying to learn how to navigate it'
Click Show more context and send full error.
rpc error: code = Unknown desc = [reason:"execute wasm contract failed" metadata:{key:"ABCICode" value:"5"} metadata:{key:"Codespace" value:"wasm"}]: rpc error: code = Unknown desc = failed to execute message; message index: 1: Overflow: Cannot Sub with 0 and 200000000: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '239512' : unknown request
Do you have INJ in your wallet for gas?
please DM me bridge hash I will check
added u thx
I did a USDC IBC transfer in Kepler from Kuji to Injective; I have an INJ token in my wallet. However, the USDC seems stuck in my wallet. I can't find a way to swap my USDC in the INJ network, and if I try to IBC transfer my USDC somewhere else, I always get a Failed transfer error. Any suggestion for a new ninja?
you can DM me bridge hash I will check
can I dm you?
yes you can
accept request pls
need help here guys, im transferring from sol to inj: account inj1mvn40t86cevscqgnnh2q4ch20f5e77nj5n3fhv not found @unique schooner
please DM me bridfe hash
ok sent you fr
I've unstaked and am currently in the 21-day unstake period. Is there a way to restake those funds during this period? Or do I need to wait the full 21 days and then restake?
you can use keplr dashboard to stop that process and continue to stake
I'm not familiar with the Keplr dashboard, is there some instruction on this?
I am using Trust wallet fyi
only keplr can do that currently
Ok so in this case, I have to wait the full 21 days and then restake
Do you suggest moving to Keplr wallet after the unstake period?
No it's up to you, I can't give this advice
Sure. But correct in that I have to wait now the full 21 days?
yes
having trouble connecting keplr to mito finance..
mito is under maintenance
ah makes sense.. thanks. no mention of it on their website though
i swapped 0.21weth on injective and after about 11 hours from now i still have not receive my injective
swap or bridge? You can DM me address I will check
bridge
You can DM me address I will check
would need you to accept friend request to DM you
2BvgbbLvrB8xQXaamTvjvYbcUZKEHxikDM7abDrsc1XRVKzyTDExpmbfSMPQfGTKzFQDuHFbFaWt3r8tHkjwyGDE phantom to keplr wallet bridge sol to inj network
accepted
Any help would be appreciated
can't find this hash
DM you already
which bridge you use?
wormhole
you can reach out to wormhole support they will check
ok thank you
this is the bridge I used my bad
wormhale support sent me back here
but wormhole provide the bridge infra
IReceving error in bridging from to osmosis from injective
are you using ledger?
Yes
ledger currently have issue with bridge
just don't send hi hello
yes but you need to use another wallet
Will this be fixed soon
yes, in the next chain upgrade
new wallet?
keplr or leap,etc...
why do you block so many words
just take a screenshot, the discord bot issue we will fix
having issue to redeem funds on bridge it says account inj.... not found any idea why ?
DM me bridge hash I will check
Let me try new wallet first
It doesnt alow me to take screenshots, I tried just now, I can try again
You can DM me
can not convert my assests, receive the error that tx expired please try again later. please help
please take a screenshot
did again, went through. this was 4th try
Help me please, I can`t do anything with my USDC on Injective.
I have USDC in INJ network that I want to swap for INJ. It doesnt seem to be possible in Helix, they don't support USDC.
So I wanted to do a IBC transfer to any onter chain to then do the swap there. However, the IBC transfer always fails. I have native INJ balance on the native chain. ANy idea? because my USDC are stuck for now.
you need to transfer your USDC back to ethreum
and how exactly I need to do it? Through the "Claim Wormhole Tx" button?
use https://hub.injective.network/bridge/ and select chain, then you can bridge
i have aproblem, i bridged 1 sol to inj now my sol is lost?
please DM me bridge hash I will check
I'm having the same issue:
https://solscan.io/tx/8fPjKEKXYunrFB96CQf2fqyehGXganKvSK7iLENPuq13tTDEA9GYtqG3xbByj17hXoBXjpuP2UuyGMaMEzZ1waR
checking now
ty
thank you!
why have no point for black panther
please reach out to their support team
Hello! I hawe same isue. I bridge with wormhole Sol from Solana to injective, Sol is gone but I can not redeam. The mesaje is ,,acoount inj....not found.
please Dm me bridge hash I will check
Ok, thnks
I have the same issue. DMing you now
I bridged inj from injective to osmosis but it is not showing up in my wallet.
can't find your hash
I re-delegated some staking and the amount is not being counted in my staking wallet, and it doesn't look like it's collecting rewards
but it doesn't show the amount in USDC
you can DM me address I will check
the osmosis relayer not receive yet, please reach out to osmosis they will help
what is your address
Hmm its not allowing me to dm you
Please DM @mystic zephyr
He will check
It's saying I can't dm him either because we either don't share a server or doesn't accept messages from people who aren't friends
Just send him a friend request
What's the issue?
SOL tokens not showing up after bridge
Did you redeem them?
Can't redeem for some reason
What's the issue?
No idea that's why I'm asking
But when you try to redeem, what are you see on the screen
if any error appear or?
Yes but the browser is already closed
Can you send me your transaction hash, please?
and your INJ address too
but in my DM
Bridging from Arb and my funds have not appeared and not able to redeem... can someone assist? Error message is "you need to create your address on injective by transferring funds"
Can you DM me with your INJ address, please?
Thanks @mystic zephyr, that's all resolved now and I have my funds
Having trouble swapping tokens using astroport DEX. I want to swap INJ into Astro but been having no luck. I’m on the inj network while trying
If you have issues on Astroport, please re-direct this to Astroport support team
Via there discord?
how to stake INJ on injective hub website?
!staking
The best place to stake INJ is on the Injective Hub itself on-chain.
Stake INJ: https://hub.injective.network/staking
Guide: https://blog.injective.com/injective-hub-guide/
any difference if i withdraw inj from CEX instead of using the injective hub's bridge?
No difference, Binance, Kucoin, Kraken etc supporting native withdrawals and deposits
I think no, but check the network in which you send tokens
so you can directly bridge them
then i will send from binance by INJ network instead of bridging from other chain, it's much easier and cheaper. Hope it won't affect any benefits afterwards
how open a ticket
Here is video tutorial also -> https://www.youtube.com/watch?v=ZuhzHCh8B9I
Binance has integrated the Injective mainnet!
You can now withdraw native INJ from Binance directly!
The fee for withdrawals is set to just 0.01 INJ. Follow the walkthrough here and try it out!
Follow the steps:
1 - Go to https://hub.injective.network/
2 - Connect with your preferred wallet ( Metamask, Keplr, Torus, Ledger, Trezor) or create ...
There is no option for ticket, you share here
thanks
cool, thanks man. Btw, how to claim other roles after i bought some nfts and staked?
if i convert wsol and transfer to cw20 where are my converted solanas now?
You should ask Talis or Dagora for that, not here
on injective hub bridging
What are you want to do?
i tried bridging on injective hub from sol to injective
Okay, did you redeem them?
but i dont find them on my phantom wallet
i dont know where the wsolanas now
You can't find that on Phantom wallet
you need to redeem now, and you will see on the Injective Hub
Yes, there is button on the hub/bridge page
Claim wormhole tx
so you need to select Solana and put your transaction hash
how to bridge fund from inj to tia ?
https://hub.injective.network/bridge You can find bridges here
is the issue with inj.space.id solved?
You can check and see, the issue was from space.id's side so we can't confirm.
how to verify token that is deployed and get contract address
https://explorer.injective.network/contracts/ you can verify it by looking and searching here
i want stake atom on cosmoshub, i swapped inj to atom how i can staking atom on cosmos
Re-direct this to Cosmoshub support team, not here
I need some assistance relating to an INJ transfer I made earlier.
You can ask your question.
discord adress?
You can use google
they are not on discord bro
I bought some INJ on OSMOSIS. When I clicked withdraw it opened the INJ wallet and the funds when there. I sent them back to osmosis, created an INJ wallet within my Keplr wallet and attempted to withdraw the INJ. After the tranfser nothing showed up in my Keplr wallet. I checked the osmosis transaction history and I can see the funds in an address thats not in my wallet.
in an address that's different to the INJ address in my wallet more specifically
Can you DM me with your INJ address please?
guys quick question can i bridge usdc from my sol wallet to INJ?
There is no option for USDC bridged from sol
The trading pairs are against USDT and USDT is bridged only through Ethereum bridge (not ETH wormhole)
so i cant bridge usdt from solana either ?
Yes
whats the best way to do it without selling in exchange
yes you cant ? or yes you can
The trading pairs are against USDT and USDT is bridged only through Ethereum bridge (not ETH wormhole)
only - key word
ok, whats the dexto
equiv for inj ? @fickle escarp
I need to know which wallet is compatible with injective, since I need to import my phantom account
I connected phantom by mistake and I can't recover funds, I need to import that seed phrase into a compatible wallet
Please check here - https://injective.xyz/3OiosuG
This article has been updated in November 2023.
Get started with Injective, the fastest layer 1 blockchain optimized for DeFi applications, by creating an Injective Wallet.
What Is An Injective Wallet?
An Injective Wallet serves as the essential tool for engaging with Injective and the applications built on top of
Metamask, Keplr, Leap are few of the supproted
i can't connect wallet for bridge sol to inj
How come? You connect a sol wallet and bridge, input the INJ address from a supported wallet and you are good to go
no option to connect sol wallet
Connect with one of the supported wallets
guys, I'm asking for help
could someone send me a little amount of INJ for gas fee? I can't get any from faucets
I was finally able to recover my solana, now how do I convert it to phantom?
bro what wallet you connected
You need to bridge it back to sol
you do it by going to the bridge page and select the respective bridges
Click the arrows to change destination and you are good to go
i bridging now polygon to injective
what token i get?
@fickle escarp
@fickle escarp sir mito finance is real partner for injection comunity
the token that you bridged on injective side
Mito is developed by injective labs
matic?
if you bridge matic you get matic
@fickle escarp mito early xp is end ❓
Mito missions have ended
@fickle escarp any chance to airdrop mito finance 😁
Follow the ecosystem socials for such stuff!
So?
Just make sure your SOL address is correct and you can bridge.
I already solved everything, thank you very much for your help. 3 days to solve this
How do you find the private key in keplr wallet? It only shows seed phrase, but in order to bridge from Eth chain to Injective you need a eth compatible waller, which keplr isnt. When I started the tutorial to move INJ from coinbase to injective i used kepler wallet. the kepler wallet then autogenerated an eth adress for my new wallet, so I sent INJ to this ETh adress, but now I can not access it, because I will need to open the created keplr wallet in metamask (so I can interact with ETH chain) and complete the bridge to INJ. But keplr only has seed phrase and not private key, which is what metamask needs for importing wallet. How do I find the private key for the new wallet created through keplr?
You can import the 12 words of Keplr when creating a new wallet in metamask
So not "import wallet" but create new? Wouldnt this just add new adresses?
Importing the 12 words - the same wallet address should be fetched
You can only import them when creating a new wallet in metamask
hmm.. ok thanks
how do i swap my usdc to inj? https://explorer.injective.network/transaction/0x0befa3e998a8240ffb9a640639458e2c178bfa9569ae087df8f7706d5d3d3291/
There are no USDC trading pairs on injective
The trading pairs are against USDT
so how do i move the funds back to ETH? or is it lost?
you can just go to the respective bridge, select it, click the arrows and you will be able to bridge back
sorry i am not that advanced, could you please tell me where to do this?
https://hub.injective.network/bridge - select the bridge that you used to bridge to injective and you can bridge it back
thank you, actually thats not working, i bridged it from mm to keplar , so if i connect via keplar where the usdc is i cant bridge it back because i need to connect to my mm.
You can just send your assets to metamask inj address and brdige from there
how long does it take for me to bridge from Solana to my injective address?
Do I need to redeem it?
to send it from my keplar to my mm do i need to ad the token first?
Yes, you need to redeem it
You can send it from the wallet page to another inj address - https://hub.injective.network/wallet
where should I redeem it?
I couldn't find the place.
Can I ask mito finance related questions here
You can redeem it through the Bridge section of the hub: https://hub.injective.network/bridge.
Head over there and click Claim Wormhole TX.
You need INJ for gas fees, check the faucets.
Receive a small amount of INJ, enough to make 1-2 transactions.
- https://inj.supply/
- https://stakely.io/en/faucet/injective-protocol
- https://bwarelabs.com/faucets/injective-mainnet
For Testnet use: https://testnet.faucet.injective.network/
thank you very much for your help an fast respond. appreciate it!
@orchid robin
Your roles on this server do not allow you to use the AI commands.
Reach out to the server owner to know how to get an ai-authorized role or Unlock unlimited uses of this AI-based feature with a personal plan.
Why does my liquidity added not show anywhere on mito finance
Mito is on testnet
Sorry, can you give me the instructions to find my transaction hash? Really can't find it.
if you did a bridge from SOL, you need the transaction hash from SOL
You can find it on a solana explorer
the signature?
Yes
sorry, but why it shows I need to create address on Injective? I got an inj address already?
Connect with a supported wallet
I need to connect with like phantom wallet rather than metamask if I an on Solana chain?
Yes I’ve done a lot on testnet but it didn’t reflect in my dashboard no liquidity now vault
The testnet is down for maintanance atm
Phantom wallet is required when bridging SOL from Solana, when you bridge you need to input an INJ address from a supported wallet. Supported wallets like Metamask, Keplr etc..
..same here , do I get INJ fast after confirming Wormhole Tx
No, this is a bridge transfer, not a trade
Any idea when it will be up?
I mean I've already connect my metamask to injective hub, and I got an inj address, but it keep showing that
No ETA yet, but its shouldn't take long.
Please fix it ,in #🌎・select-language I haven't active Turkey channel
how can i get access to telegram?
The custom interoperable layer-1 for building powerful DeFi trading, derivatives & Web3 apps | Get Started: http://linktr.ee/injective
To which address did you bridged your assets to
first time using injective and i made a mistake instead of sending bridge funds to my deposit address i sent it to the contract address is there any way i can get assistance. This is the address i sent itinj18nrcpseve9kn847vr6nv7d9tvuge5xry0nc6vg to for the amount of 22.060 Injective I made a honest mistake instead of sending it to my deposit address inj1tnhe4qg0hd5rj7u65hyjgdwruangvtd8amgghs
this just happened like 15 minutes ago can someone assist me
which wallet did you used, and to which the address belong respectively
i used kepler wallet
You just connect with the respective wallet address to the hub and you will see your coins in the wallet page
i didnt send it to my deposit address made a mistake and just copied address of contract
Oh, that's sad. Sending to a contract address is a huge mistake though.
you can see it was a honest mistake if look at the transaction summary
transactions cannot be reverted on a blockchain
Always send to a recognised Injective address.
if you send to the wrong address and accidentally burn your tokens no one can help you
wow
I just bridged SOL from phantom wallet to Keplr INJ wallet through INJ bridge
https://solscan.io/tx/cx4d4UMXucutnijMHxxz5TstRNKiSKuuRLUS2mTfXc5Dryj176oxC1JXxfUWTQ8BSVA1SB93NyvxrNs8JcnAYX6
But I havent received anything and can't redeem anything either
Can someone help?
Check now, in your wallet page on the hub
Lifesaver thank you so much
Are faucets working?
The testnet is down for maintanance atm
So if I understand it correctly, I turns the SOL CW20 into bank, and then I send it to my own INJ wallet?
so i just deposited into my deposit address why cant i see it on my kepler waller
After you have sol in bank you can trade it
Check through the hub wallet page - https://hub.injective.network/wallet
where can I swap SOL for INJ ?
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
Thank you !
Thank you
Please provide me more details here
Which bridge exactly and wormhole transactions need to be redeemed
Is there any problem with task update?
im trying to join @injective telegram, but it said: Warning Telegram: (this specific name) is already registered by address: 0xa17a872183bc87e6e..................., please remove it first. what thats means?
It takes some time to update
In my case are 10-11 days, it needs one month?
Telegram is not connected to addreesses
For such issues, DM is the best.
sorry for bothering, my problem's solved, it's still the gas problem, seems like I've never receive the free gas.
But it's solved, thanks for helping, really appreciate your kindness and patience.
Check #⚡︲about-injective for correct social media handles
INJ to Celestia bridge is working? I tried 2 times with success tx but it comes back to INJ 😄
Noted, i will forward
how long does it usually take to recieve inj from binance?
its fast, once binance process the transaction it will reflect in your wallet
got confirmed in binance but is not reflecting on keplr
balance reflected just now
thanks 😁
so, keplr is the best wallet here in inj?
it is one of the wallets, metamask, leap and others are also available
which wallet is best for trading native tokens?
You can check the supported wallets when connecting to dapps like helix
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
i get sequence errors in keplr, do you guys know this issue?
astroport shows my correct inj balance but keplr is 1 transaction behind somehow.
Keplr wallet has synchronization problems today
I am not able to take my money out of the hub, ERC20 were supposed to be accepted but apparently USDC is not and now I’m stuck, I don’t know which account I need to fund to make it work as when I connect my MetaMask there is another wallet showing up there, other than my original INJ wallet
oh is this why amount transfered is not showing in keplr but shows up in https://hub.injective.network/wallet ? honestly first time doing this and im puzzled as to why
Keplr has synchronization problems today, it will reflect in keplr
You need to connect with the same wallet address in order to see it
I do and not have enough INJ but when I try it always says that I don’t have for gas and I have like 10 dollars in each now
Whenever I try to do the transaction my wallets change
ETH bridge transfers are done through a supported wallet for eth like metamask
Guys, I just bridged money into inj and its show it went through on explorer but on my wallet i cant see it
Can you give me more details
On my keplr wallet it showsI have 0 funds.
Which wallet I need to fund to make the transfer? My USDC is in the first one but as soon as I connect my MetaMask it changes, it’s super confusing
But when I check on explorer it shows my funds there
You need to fund the one that you have USDC, then import it to metamask to access it
Keplr has synchronization issues today
ive got a txn stuck in the bridge because i didnt have any INJ in my wallet. The modal disappreared now i cant seem to find the funds as i couldn't claim before the site disappeared - what can i do? :/
So as long as my funds are shown in explorer they should show up on keplr once its working properly?
ok thanks, amount just showed up but if i want to stake it says i dont have enough for fees (not im not staking the full amount). is this also part of the sync problem?
Yes
i believe you are correct here. this is what happened to me
https://hub.injective.network connect keplr here and you can probably see the amount
potentially yes, i am using Metamask and have no such problems for example
Gas fees on INJ are very tiny and you dont need a lot
0.01 is more than enough for many transaction
ye thats why i find it weird it says i dont have enough for gas
When i am staking INJ and i wanna redelegate to another validator, is that instant or must wait 21 days for the initial staking to complete?
The re-delegation itself is instant, but the lock period is 21 days after being able to move them again
thx
do you have a link with instructions to follow how to connect metamask to inj network? and can i use the same secret phrase as keplr?
That’s is the issue, when I try to import that wallet by connecting it to MetaMask it automatically changes the address
everyone says Keplr is the wallet for INJ but using MetaMask is totally fine as well right?
account sequence failed expecting 264 got 265, too many concurrent txns.. how do i fix this? Are the RPCs for keplr wallet overloaded? trying to claim staking rewards
https://blog.injective.com/en/injective-hub-guide/
Yes, you can import Keplr to metamask and have the same address in both wallets
If I have bridged ARB to injective and want to swap to INJ is there any way to do this?
Give some time for keplr, Keplr has synchronization issues today
are there alternative RPC settings which would help?
You import to metamask when creating a new wallet
You can see available RPC here https://docs.injective.network/develop/public-endpoints/#mainnet
Just to confirm this is what shows in my keplr wallet, and then this is the explorer. My funds should be safe and not lost? Coming from solana i've never dealt with something like this.
Your funds are safe, Keplr is just having synchronization issues.
Does anyone know why i keep getting this error when trying to send inj to my other wallet?
just here again. Ive got the txn through wormholescan but how do i redeem it?
Which wallet do you use and do you leave enough INJ for gas fees
You redeem it through the hub bridge page, there is a button - claim wormhole tx
keplr and yes
I sent 1 INJ from binance to keplr, it says on binance successful but i still didn't recieve the INJ on my keplr wallet, its been 20 mins
Most likely it is due to the synchronization issue that keplr have at the moment
Keplr has synchronization issue
Thanks - im getting this message though :/
Give me the transaction hash and form which chain did you bridged?
bridged from polygon to inj - txn is 0xc388caeb1df60f67559b2fd25d0661ac7a4ee708b60367de9659213a0a5ba145
do you have any idea when it will be fixed?
Done i have redeemed for you, cna you check your wallet
Please refer to keplr
where can i contact them
I used Helix DEX to swap some funds to INJ but now can't get those back into Keplr. They show up in the Helix account but not in Keplr. I've tried moving it to a different INJ wallet, same thing. Do I somehow have to "withdraw" those funds from Helix back to Keplr?
Keplr has synchronization issues atm, give it some time, you dont need to withdraw anything, they are in your wallet
thank you!! Its not loading in my wallet yet so will give it a few minutes
Check on the hub wallet page
Seranium I am not able to claim wormhole tx and redeem my funds; I click the redeem funds button in injective hub and nothing happnes. Have you seen this before?
where can i contact keplr support?
Can you give me more details
@fickle escarp If I have bridged ARB to injective and want to swap the ARB to INJ is there a way to do this?
I bridged from Metamask using Injective Hub and now want to do the Claim Wormhole Tx. I see that it deposited successfully. But when I try to claim, nothing happens when I click on Redeem Funds
You can do it on helix
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
From which chain did you bridge and cna you give me the transaction hash
Ethereum, tx hash is 0x6efe497fc9cb035ea6398e1583b6bb1e59e99cb2cf898b25d5a8d226c295f283
hmm its not loading on the hub wallet yet - not sure where to view it. I see its under CW20 balances, but on the hub wallet page it only shows the INJ balance and the ERC20 balance
Ok thanks for getting back to me will give it a shot now!
Ethereum transactions dont require redeeming,
Only if you bridged through wormhole
Weird, maybe Keplr just needs more time to show it then in my balance
If I am trying to swap on helix but ARB isn't showing up on the dropdown of available tokens to swap, and I tried copying and pasting the denom from injective explorer and still doesn't pop up, do you know how I can go about selecting it as the token to swap to INJ?
does a binance inj withdrawal to keplr wallet require a memo or only vice-versa?
https://helixapp.com/spot/arb-usdt - you can see the spot trading pair here
You need memo only if you are depositing to Binance
keplr support offline xD
CeX to Kepler no need memo
Keplr to cex need memo
You can try messaging them at twitter then.
https://twitter.com/keplrwallet
No other support options afaik.
dms closed
Sad 
kepler wallet not updating anyone?
Keplr is experiencing a downtime.
on coinhall it's showing my balance but on kepler no is it something to be worried about? i'am a newbie
Keplr is experiencing a downtime right now.
For now you can use https://hub.injective.network/
what does untracked means in the injective explorer
Got it! Thanks again for your help!
So im not sure how to view this even though you redeemed? I can see the txn under the explorer still but not in the hub wallet :/
cw-20 assets are displayed in the hub wallet page
ayo you cant swap from sol to inj on astroport?
i swapped 2 sol to inj and now more than half is gone wtf
Funds in fact made it finally haha, can say it wasn't the best first experience on inj with the wallet but the support was fast and helpful so for that I am thankful. 🤝
if it has no liquidity on astroport this can happen
I used hub.injective to bridge 1 SOL from Phantom to Keplr but i can't redeem it. It says "account my_inj_address not found"
I'm connected to the website with keplr
broooo wtf
you just should have used Helix where you can directly verify the liquidity on an order book exchange
there is no way to revert the swap right?
you cannot revert blockchain transactions
im here but can't see it. How can i change it to INJ?
Click on the arrows to change the direction
iits not showing up in the hub wallet though?
astroport robbed me brah
i'm trying to delegate INJ on Injective hub, but keep saying "insufficient gas fees" even though i have more than enough. Tried doubling my gas to no avail
Sorry for the inconvenience but the issue is from Keplr's side so we can't really do much about it.
Bro You need INJ for gas fees
I have 10.2 INJ available, trying to delegate only 10 INJ
Which wallet Are you using ?
keplr
There is some problem in it, please try after some time.
ok thanks
keplr has synchronization issues rn
does it happen often? how long does it last?
CW20 tokens aren't showing up. How do i change them from CW20 to INJ native?
From which chain did you bridged?
Polygon
is the transaction redeemed?
yes you redeemed it earlier - you sent the message confirming it at 4:07pm above
give me link to the message
anyone had problems where INJ is in the wallet but dont show up in kepler ?
My Inj bridge from Eth to Inj seems to have gotten stuck on hub.injective network bridge. It has been in Ethereum confirming(11/12) stage for more than an hour.
https://explorer.injective.network/account/inj1rswcacgmv5utc7lymjaqp7k8ys7taf6uhek5k4/cw20balances/ the funds are in your wallet
check if you are connected with the same INJ address
i know but they're CW20 tokens which aren't showing on the HUB wallet, so im asking how to make them appear or convert them to INJ native tokens
They will reflect dont worry
You need to click conver to convert to bank then you can trade it on helix
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
Thanks, is that an ethereum congestion or delays on Injective? usually confirms within 10 mins but this is unusually long.
where can i find the server of mito?
There is no mito server
i understand but it isn't showing in my HUB Wallet, so there is no option to convert it. There is no button to convert?
follow them on X, thats better.
i have said many times
wallet page and click convert on your ARB to convert it to bank
then you can trade it on helix
but there is no button to convert on the wallet page!
The button next to ARB
Never mind! Looks like it has already bridged but hub.injective is not updating for some reason.
i have questions about not being ableto swap cause my balance appears as 0 in their app
I sent some $Inj through binance and its confirmed but I dont see any funds in my keplr wallet ?
im not doing ARB - doing MATIC, which isn't appearing
does it usually takes time ? its been around 30 minutes
Can you clean cache and see if they will appear
and make sure you are connecting with this address -https://explorer.injective.network/account/inj1rswcacgmv5utc7lymjaqp7k8ys7taf6uhek5k4/cw20balances/
tryna register a .inj domain but tx wont go tru , keeps saying registration failed The sequence number provided in the transaction is incorrect. Can anyone help?
something wrong with the wormhole bridge?
i cannot redeem my funds. also not on injective
anyone 
i bridged eth through portalbridge by wormhole but it doesnt let me redeem the native token (injective)
Can you give me the transaction hash
0x5e9eae0413f1c2a1d013cd8e8d109df50a84abc4703755327b60dad37c4ba3a9
apparently kepler is down since like 40mins
Cleaned the cache but still nothing. This is the Wrapped Matic thats in my address
Gotcha
I tried briding 0.6 sol via the injective bridge. It says inj.. wallet not found after transferring the SOL. I cannot see the transaction in the list of transactions.
Hash tx: 4iHVsjGUDE2eLJqUVnMpaCFkRSk7SYfAeNLFPtidynGYjA818jmNePoVQqCBEGRQ6AN1UBRjVfJVYygXGGbByqsD
have the same thing
You need INJ for gas fees and make sure you are connecting with the same wallet address
Where to get Inevm faucet
Help me please, I can`t do anything with my USDC on Injective.
I have USDC in INJ network that I want to swap for INJ. It doesnt seem to be possible in Helix, they don't support USDC.
So I wanted to do a IBC transfer to any onter chain to then do the swap there. However, the IBC transfer always fails. I have native INJ balance on the native chain. ANy idea? because my USDC are stuck for now.
Although it's from SOL to Injective? I need gas fees to claim my bridged currency?
@fickle escarp
Ah so i can see the issue - this address is not my address? But its weird because in the KELPR dashboard it is loading the INJ amount from this wallet, so im a little confused why that is
@fickle escarp is there a way to retrieve the tx hash for injectivescan?
You should bridge back to the respective chain as USDC is not supported on metamask. USDT is the stable coin which is used mostly for the trading pairs
Yes, INJ for gas fees is required
Maybe you forgot to adjust the INJ address when doing the bridge, can you connect with the wallet from which you conencted to bridge? and let me know if you see it there
Can u please help me
hmm i wasn't prompted for a different address, so not sure. But I am connected to the wallet which I bridged from, but its not showing anything?
When you redeemed it, was that the point at which you choose which wallet to send it to?
hey, here it is https://inevm.caldera.dev/faucet
Sorry i missed the message from all the activity
I cannot change the destination address, so the funds has gone to the wallet that you bridged
Question just moved INJ from coinbase to the hub, then bridged it to INJ Native. I tested sending 2 INJ to my KEPLR wallter address but I dont see it in my Kepler wallet now but I see the balance on the explorer?
But the Injective bridge doesn't show the amount in USDC
sir i have the same problem , you can help when you have time thx
but thats not my wallet, so im not sure how the funds ended up there? You redeemed it for me, so thats why im asking this?
Keplr has synchronization issues atm, give it some time
Thanks
Click on the arrows to change the direction and you should see it on the respective bridge