#unofficial-setup-help
1 messages · Page 163 of 1
Anyone have any idea why I can only put four items in the transmitter inventory for transfers?? Until last night I could put at least 15, today it just says max number of items reached when there's only 4 in there
this is not true
Yes.
how to fix rock drake not spawning
I would like to upvote this lol
Its part if abberation, you can enable non-native creature downloads which will allow anything to be downloaded or uncryoed. Otherwise abberation has a rule that unless there is a native abberant version of it you can not put it out there with the exceptions of some map specific non flyers such as gachas, velons, maeguana etc.
I thought the whole logic of aberration relied on the creatures there being forever changed by radiation. But yet it doesn't change non-aberrant creatures to aberrant? It feels extremely clunky and poorly done
there are no non abberant versions of creatures on that map, the abberant version have a 5% increase to dmg output and are immune to radiation damage. Normal creatures brought to abberation can only really help you in the early and mid game content (green and blue zones) while the red/rad zone is locked behind a radiation resistance requirement. Ab forces you to play ab.
Also... they WERE forever changed... over an very long period of time (they ellude to rockwell being stuck as the overseer for decades even centuries) so those changes happened over a long period. It wouldnt make sense for you to bring your regulare anky to ab and expect it to become an abberant variant after such limited exposure time to the ark. the Ab creatures adapted and evolved to survive not becuase they crossed a territory line.
I didn't know that part, that's actually pretty interesting. I'm all for the content lock honestly, otherwise it follows the same formula of transfer dinos, grab artifacts, do bosses, next map.
Knowing this new information though, that'll expand the gameplay quite a lot
ab is a really well done map, even if you transfer with full gear you can't just wipe the map.
Hi, someone have a command for game ini, for block desolatitan beta, gamma, alpha engramme please, I found nothing on their discord, thanks
Anyone know a command to destroy wild bee hives only? Or has wildcard still not made a difference between wild and tamed after all these years.
Server i'm hosting with friends has all tamed dinos' health and melee damage stat scale crazily high per level. All specific scaling stats are 1.0 and Singleplayer Settings are off. I'm at a complete loss, does anyone have any idea what might be causing it?
Its still classified as a structure as far as I know, not really an easy way to destroy them.
Bugger. Wish they'd fix them stacking. No where near as bad as it used to be, but there were 26 of them on 3 trees.
Daily dino wipes help, but they have to be daily or 2x a day seems to help.
They have started spawning in, I didn't really pay much attention lol.
how is it that when i start e new ark world and that i don't even get a single exp, its stuck at 0.0 and i searched for how to fix it for a while now
I have a question 🙋♂️
I run my own servers and I use beacon but I have done every dino same stats, so different maps are different stats can someone give some advice please?? 🙏
I've got caps and numbers in mine and it works perfectly.
@willow ember Are you using 'EnableCheats password' then 'cheat fly'?
Dino wipes dont clear hives. Done a wipe a watched them stay.
Removes all beehives, including tamed hives.
Is there a rock Drake fix for unnofficial?
Wait for the major patch this month, or add them manually via ini config
Anyone have any idea why I can only put four items in the transmitter inventory for transfers?? Until last night I could put at least 15, today it just says max number of items reached when there's only 4 in there
does anyone have an idea how do i change the game settings like rates and etc?
Guys, who got the "Bad service version" error, how did you solve it?
Oh Ik, but the structure seems to decay with no bee.
The daily wipes seems to help cuz we dont see this since we started them.
Can someone help me? I cant Join the most played oficial server disheremine Ragnarok It says the connection with the host expired i tried everything what do i do?
Quick questions if i buy primal nemesis mod for my server does everyone else have to buy it to use it as well?
And the casino mod if i purchase it and add it with they have to purchase it as well to use it?
premium mods have to be bought to use. the description may say freemium and say what people who don't buy it can do.
servers can't buy mods, its all on the client.
yea i was thinking of the server password. i realized my mistake and relayed that thru dm. thx for the correction and getting the proper info out there
Only reason i noticed is when I was sitting around with a structure scanner active it lit up only a few hives but had a higher count. Destroyed one and there were more under it.
I have three maps (Island, Center, Scorched). They all have identical ini, but for some reason - my plugins will ONLY work on the island. Everything has been installed the same. Is there a reason they may not work on the other maps, despite all other things being the same? I've searched and am just at a loss.
i am unable to get the fear event to work, my server wont even show up
hmm well maybe i just didn't wait long enough, i see the mod now on my server list after i click "Join"
Hey all, a friend of my setup an unofficial on a dedicated machine, and used the default ark config files for all the game settings, despite that for some reason Everytime the dinos are levelled up in melee or health specifically, it’s like super boosted. When he tried turning down these 2 settings, it didn’t have any effect what so ever, so is there some other setting overriding this or what’s going on?
Is there anyway to turn down the fog slightly on my nitrado server for all players?
has there been a fix to being unable to join any unofficial servers? click the join button and nothing happens. can join official but not unofficial
Anyone have an issue with the artifact in the forest titan cave not showing up?
Is there a way to up the amount of taxidermys you can have out?
Believe there is a mod that can run commands on player join thhat this could be included, for the name of said mod, not sure
Hello everyone, i have an issue with max levels of wild dinos, it looks like it is capped at 1000, me and my friend got bored from ark and wanted to go crazy a bit and set for max lvl wild dinos to 1500, but when you tame anything from 1000 to 1500 they are 1531 it dosent add the 50% levels.
Any ideas for what i can change to have crazy levels and ist it possible? I have server on Nitrado if that makes any difference
I've set the difficulty for my Val map to 43, giving me a max wild level of 1290, perfect tame at 1943, tek at 1548/2321 and it's made the map hella fun, bc I got myself taken out by a 215 bronto stomping around
I boost the difficulty levels for all my maps, with Island being the least at diffculty 25, max level 750
So it seems that the issue is my setup 🙁
yeah, you'd need to set the difficulty=some number, and offset at 1
it's an easy fix with a dinowipe as soon as the change is made and the server restarts
they sapwn fine in the wild the only issue is when i tame high level
ahhh
and i do dino wipe every day when restarting server
admin tame will get you perfect tames. taming effectiveness in the wild depends on a lot of factors
the issue is why dosent go above 1531 level when i tame for example 1500 wild
if i tame lower than 1000 it works fine
if you can share the ini setup i would really appreciate it
ohhh
try something above 1000 like 1200 maybe and see if it goes above 1531
with 1200 wild lvl you should get 1799 with kibble
Does anyone know if u can get the full events (winter,easter and fear evlolved) in ase on a g portal server with raptor clause and dodorex/wyvern actually spawning
ase does not have events anymore
unless you are switch/mobile.
Hi, I have a question. Does anyone know which Discord channel to use to send the private thread with the 10 images of the Jack O' Lanterns?
hello, how can I increase my SP player level gap to like 200-300 in Survival Evolved? found stuff online but the articles did it differently and one of those seem to not work for me at least
https://steamcommunity.com/app/346110/discussions/10/517142253858366913/
just gotta put the levelexperiencerampoverrides settings in game.ini.
its very long can't post the actual thing in discord 
there are 2 there. first one changes survivor. second one changes dinos. they are the exact same so you can't change dinos without changing survivor. (you can have it the exact same as normal tho)
ay thanks man! appreciate it
do i need to put it under any of the categories/sections in the ini file as well or not?
there should only be the top script in game.ini so shouldn't need to be anywhere specific. I put it at the very bottom since its so long. (remember no empty lines)
first remove the space. second best to have them be 0 so they aren't maxing out
shit, i accidentally deleted the question when editing 😭
but i see, thank you so much for answering and helping me!
it worked 🙏
oh, forgot to mention. the ascension levels are counted in that so you'll still need all those bonus ones to get to level 300
Hey everyone!
I’m playing ARK: Survival Evolved through the Microsoft Store / Game Pass, and I can’t download the DLC maps like Extinction, Aberration, or Genesis — the download just gets stuck and never starts.
Has anyone else had this issue recently, or found a fix that actually works?
This is server setup questions - you probably meant to post this in #bobs-with-probs - I never used Game Pass so I have no idea good luck.
tested spawning in a wild level 1500 vanilla theriz. only came out at 1531
?
took me a bit to get to it
Yeah i guess there is a cap, ASE there was no cap
idk why they put a cap, is there way to remove it
i hope there is a way to remove the cap
ooh it's the 255 limit on stats
other than speed and i have speed leveling on
the theri i spawned in was maxed on all stats at 255
Yeah there is a per stat cap so some creatures can go higher levels just cause they have more stats/can actually put points into them. Example alot of creatures only have 5 stats instead of six due to lack of oxygen and some like gachas have like 7. But per stat the cap is 255 wild/base, 255 mutated (really just 254 since muts are even numbered)
hello - Fluffdragon told me to try asking this here since he.she wasn't able to figure out the problem up in the bobswithprobs thread 🙂
I have been struggling with an issue since a few weeks ago. TBH I don't remeber exactly when it started - I have a tbi that goofs up my memory and I didn't write it down /facepalm. What has been happening is my charater is getting lost when I log off the game. The next day I come back and it is gone. I'm not sure if it is something to do with my cluster on my pc or what. I have run updates on all the servers and the game is up to date. The only workaround I have found it I need to learn an engrame and then the .arkprofile seems to save after I log off. If I don't learn an engram - pretty good chance my charater is gone. Thankfully I run a backup on my server drives and i was able to find a .arkprofile for my charater and have it saved into a special folder not with a script to copy the file into my server folder when i come to find it didn't save after the last logout- this seems odd. any thoughts?
do you use -usestore? check the pinned comments here, once i ran -converttostore and -usestore ive not lost a char on my cluster since
thanks sooooo much for this!!!!!! massive help
is there a mod for increased crop yield for ase? Im in singleplayer, and Ive modified the crop growth speed, but it seems to only affect seeds getting to the fruitling stage, not how fast the output is.
On nitrado is there any code I can use to reduce the fog from the island for everyone permanently? Not off. Just reduced. No mods. Thank you. ASA
Just sat on the side of the volcano for the last 15 mins lol cannot see anything on screen
Tamed dinosaurs in ASA Valguero get abnormally high Health and Melee Damage per level. All stat scaling configs are default 1.0 and SingleplayerSettings are disabled. Any idea what's causing it?
@golden charm u there I nedd to ask u something
Is fear ascended updated and working rn?
Yes I've had it on my servers the past 2 weeks.(Not the updated version).
Does club ark need the event mod added to the launch parameters during events or not?
nope
Thought so but wanted to be sure, thank you!
Has anyone found a way to Rcon a dedicated server (not hosted) there were plenty of options for ASE but I cant find anything for ASA
So with the Fear event being a mod, are all the event dinos on my unoffical going to be taken from my peeps once Fear is over?
do we still need the use event colors server option to get the dino colours?
are you running your own server locally?
no as zombie wyverns are in the base game
Hi all. i have "LogCFCore: Error: Error querying server mods: Failed to send request to server with error: 400" when i try to start my servers (after the upgrade). Is anyone have the same problem?
i cant update servers ethier
Not yet, going to update one of my servers~~ but not all of them atm~~. Seems fine so I'm updating the rest.
That's a bad request error and could be from a bunch of different reasons
Does someone know how do I remove enegrams from my ASA server(I want to remove cryopods)
I use same way I did with ASE
R.fog 0
My server says its running and i restarted it, but nothing shows up under unofficial servers at all. Any help?
Have the same problem there are no more servers at the unofficial
Weeelp
Have you typed your server name in to the search bar to find it that way?
Yes
Still no luck?
I can't see any unofficial servers anymore, not even through the search bar ours can be found
Does anyone happen to know what the Steam subsystem message in the ASA server console means at startup? Is it something else that Wildcard didn't communicate?
my unofficial list shows all kinds of servers, did you guys update your client
All maps updated but a few players cant see them at all
Can you guys help me please
Well im on a server with people and we keep getting roll backs in a loop can anyone help me please i dont wanna lose my progress
That was happening to us about 12 hours ago.
Can we get a bug fix for this update
Can the server owner stop the server or restore a backup?
Nope. I'm on xbox, one of the folks who can't see the servers.
But someone is in the server, so its up.
xbox having issues if you go by status updates #status-updates message
That's why I said I was one of the folks on xbox with the issue, there's been no other update since this morning.
But hopefully soon 🤞🤞 I can't wipe the dinos for folks to hunt the new ones 🙁
xbox having such bad issues there status page dont even load 🤣
looks like a full section of microsoft azure is having issues
This was my last day off from surgery and you just know they couldn't let me play Ark with it. 😂
What is Azure?
its microsofts version of AWS
Idk who is the server owner
Make sure the player server only box isnt ticked
Okay I'll have a look im on switch
You need to find out whom runs the server you're on. Find out discord info or w/e
Okay ty
It's on. Switch?! Oh I'm hyped, it wasn't when I looked a long time ago.
The workaround i saw someone post is to click the "allow player servers" or something like that, it worked for me.
Search player servers
I'm sure someones asked this before but I cant seem to find it anywhere in the chat history. I have a dedicated server and I'm trying to mess with the maturation timer settings. Folks on my server work and can't grind crazy hours. So want them to enjoy breeding but without waiting 8 hours for cuddles and several days to raise a single wild dino. Was thinking these settings may be a good start to take the edge off and to decrease/increase from there. I just cant get the settings to take.
BabyMatureSpeedMultiplier=5
BabyCuddleIntervalMultiplier=.2
BabyImprintAmountMultiplier=2
EggHatchSpeedMultiplier=3
Tried putting them in the GamerUserSettings.ini under [/Script/ShooterGame.ShooterGameUserSettings]. Nothinggg. Am I putting these in the wrong spot?
I just set up my own PVE server via Nitrado, I am asking for assistance on Giving a player points to unlock engrams and level up, How and where do I do this. Also How/where do I modify the loot drops?
Is Fear Evolved a mod we have to install?
Those are in the settings section, you can just do it that way rather doing it through the ini files
Settings -> General
its fear ascended. yes you have to install it and enable it.
yes they're in the wrong spot. they go in the game.ini. btw, those will still be super slow if you don't have sp setting enabled on the server
Have they pushed the update for v74.5 into private servers yet?
The only file in my Config folder is the gameusersettings.ini
Everything I was looking it almost had them as the same thing so I wasnt sure if it was an ASE vs ASA naming thing.
I was wondering if those were low. I keep getting mixed reviews online so I was going to ratio see how those impacted numbers before going heavier.
Ignore me. I think I deleted it when re-formatting from The Island to Ragnarok. Stole one from a prior save file.
that was pushed like 5 min after the patchnotes went out
okay thanks
On unofficial, is fear evolved limited to the 2 weeks like on official?
no, its until you remove the event launch argument
thanks
Are there still issues with player ran servers populating? I’m running one from my pc to play on my Xbox and it’s not showing up
im on steam and still cant see servers no matter what i try
Okay that gives me some hope I suppose, I haven’t played in ages but I set up a sever the same way I always have and not such luck at it populating.
(Make sure “Show Player Servers” is checked then use the search bar to look up your server name) wonder if this actual works for anyone cause my friends and I it does nothing
... got it to work, but i had to search for PVP servers even though ours is PVE only....
it wont lemme join my unofficial server not sure why. I can see it under the unofficial tab i click it to refresh so i can join but once i refresh it just shows "No sessions found!"
I think it is all related to this #status-updates message My cluster, which I host is running ok but not visable.
okay it now shows and is visble but its greyed out and i cant join it would it still be relevant to whatevers happening in status updates?
can someone help with this problem everytime i hit someone in the head of my dinosaur it dosent do the headshot multiplier example im riding a raptor i hit the trike in its head it dosent take reduced damage in the head
Pretty sure it's related to Nintrado. I believe they control access to all servers including unofficial
It's appears they are having issues. Will try again tomorrow
yeah im having this issue also. its kinda annoying
I'm not with Nitrado and I have the same problem. According to the server, they're online, but they can't be found on the PS5.
yeah im on gravel guess the unofficial servers r js broken
However, many unofficial servers are running.
o u right well then i guess its just half broken js gonna pray tmrw it works
Do you use mods? If so, which ones?
Anyone else seeing this in the server startup since yesterday:
Initializing Steam Subsystem for server validation.
Steam Subsystem initialized: FAILED
No
Use quite a bit do u want me to name all of em?
If you don't have a problem with it, you can certainly do that. It might also be a mod error.
anyone know a way to allow things like JVH garden decor/landscaping to be placed on platforms?
has the No session found issue been fixed?
Hey if any server owners need help join the server owners discord in my bio
Hey, my freind shadow has a server and he is owner, im co owner, he wants me to post for him in server ads, is that ok mods? do i resquest to do that here? im sorry if this the wrong chat, please let me know
i don't know a lot, but i can see there's a server-ads channel over there on the left <------
I saw that, but I need permission to post I stepped down as owner and am now co owner, and the rules are if not owner you need permission so I thought I could ask here
Tamed dinosaurs in ASA Valguero get abnormally high Health and Melee Damage per level. All stat scaling configs are default 1.0 and SingleplayerSettings are disabled. Any idea what's causing it?
So is it just me or are unofficial servers that are self hosted not appearing on the server list? Everything was fine until the update yesterday. I have read about curseforge issues and perhaps some issues with Nitrado. When I look at the list I do see other unofficials but most don't have any one on them.
I'm having the same problem and can't find my own servers. I'm not with Nitrado either.
OK good to know. Not seeing anything about it really. Going to submit a report
I haven't been able to download the Fear Ascended mod on PS5 since yesterday. It freezes during installation and then crashes to the main menu. Because of this, I can't access the official servers.
So I run my servers through unraid and I just forced them to redownload things by deleting the SteamApps Folder. When I did this I was able to see my server again. Something in the original download got messed up on several of my servers. There must have been issues that corrupted things. Odd that the server still loaded.
Does that mean I have to set everything up again?
Is the issue still not resolved? 😭
Sorry fell asleep but I don’t think it’s a mod error it was all perfect and I feel like I would’ve seen it in the console of my hosting if it was a mod error
Unfortunately not, we're still looking for a solution.
It was just an idea.
Have this issue could just try putting the multiplier below 1.0 I never tried cuz i don’t mind the insanely high multiplier
Has anyone figured out a fix for the overspawning of fire wyverns on Rag map when the ini setting has already been tweeked to lower the spawn rate?
health and melee are not defaulted to 1.0
How are you hosting your server?
this is cheating, we cant use pictures to aid in helping 🤣
nope, you gotta write them out
or ask if you can dm them.
I have a separate server and need AMP to create, update, and configure the map. After that, I can edit the ini file using WinSP Gaming. Is that helpful for you?
So, not via Nitrado.
Anyone else having this issue when enabling this year fear ascended mod on unofficial dedicated server where anyone logging in after the mod is enabled and server rebooted, their character are not found and need to create a new one, but everything is fine if the mod is removed? it's the only mod activated
I am not sure how this works for Amp but if you can reinstall the ark server files and mods it may help. You would keep your settings and saved games of course.
so we are all still waiting for the fix of servers not showing?
I am not sure. I am beginning to think many of the issues are related to botched installs from Steam/Curseforge. The implementation of this update seemed to have more snags that way.
its been more then 24 hours now since my server is basically living but inside a shadowrealm. We hear nothing from the devs etc on those issues although we have been more then just loudly screaming in this channel that our servers have been gone. It wouldnt be a major issue if it would just be an occasional one at a time problem but its affecting hundreds of servers.
hey !! anyoen can explain me here how i can invite a friend on steam in a game that im hosting ?
Tell them the server name and they’d have to go to the unofficial tab when clicking join game on ark and just type in the server name and it should pop up
I have a server
anyones cluster having issues with battleeye>?
Has SetThreadDescription been solved?
how do i transfer my world file from my singleplayer/non-dedicated world to my dedicated server
whenever i try to transfer it over the server just deletes it and make a new fresh world file
Do you have access to ur files if so easiest way is to copy and paste ur gus and game ini's then copy the saved ark folder build ur server and replace them with the copies it should bring all progress withe the saved ark folder but this is all speculation I've never applied it from single player but when I have to rebuild server due to corruption I use this method
Do you have player servers only checked? Unofficial needs that checked now for some reason. Then you'll need to search for your server to show them.
how do i make my linux ark server give me logs in the console, currently it will work but just says nothing and i cant even tell if my commands i put in the console are doing anything like idk if it even lets me save or exit
everything else about it works am i just missing some launch argument or something?
Is it possible for someone to help me solve this problem?
I need help.. I just bought a Nitrado Server & cant activate my creative mode.. What do I do?
hello, i need little help.
I just create a vanilla ark sa server, i can connect on it via the console : open X.XXX.XXX.XXX:port but i can't show it on the list, any ideas ?
Time for the 100k questions from nitardo people on how do I add the extra life event to my server 🤣
Or for them to be like "Whats a command line?"
2 days now since servers have been send to the shadow realm and are not showing inside the server browser. Fantastic priorities wildcard
im sorry were you expecting wildcard to fix anything fast?
Especially when it comes to Unofficial
Dogshit fuckass event ✅
Servers not appearing ❌
We are the red headed step child, if it don't affect officials we on bottom of the list for them to look into it
this should be for an company priority number one.
Guys are there any other unofficial server owner who has problems with event work right? O.o
Because only stuff in our cluster what works are event color palletes on wild dinos. No skeletons, no event theme items. Just nothing and yes, event is on.
When you say event is on, do you mean the mod is added?
On ASA the fear ascended event is a mod there is no turning it on beside installing the mod for it
Theres nothing beyond what you have for ASE.
Events stopped being supported in 2023.
Note that ASE has changed since last year, cough cough Aquatica. So things may not work like they used to.
Uhm true true, just some stuff working, rest of features nope kekw
I cant update my pc server Version 73.39 to the latest version don't know why
Without seeing output from steam(CMD) who knows why, could be installing to wrong dir, could be connection error, could be anything
How do I activate the extra life event on my server? I tried the -activeevent=partydodos in the command line but it doesn’t work I don’t think…was told to come here from general chat. I tried scrolling back but didn’t see any info before posting. TIA
Selfhost?
Nitrado
Choose it from the event dropdown menu
Oh ffs. Thank you! I didn’t even think of that
How do i activate it on my selfhost? 😄
-activeevent=partydodos
Is the extra life event messing with cosmetics?
I want to enable it but not if its gonna mess with skins.
Error! App '2430930' state is 0x6 after update job What is this?
Is there are a way to create Ark Ascended server on Unraid server ? or Ark studio made anything to avoid custom server because they want sell nitrado server for cash $$$ ?
I seen a package named ARKSurvivalAscended ich777 but it seem broken ... it restart in loop...
Could be a few things, Write failure / no disk space / corrupted file
I have an issue with player max level, goes to 75 and dosent receive xp to go to next level, i even tried with command but it dosent give xp even with command.
The only thing i changed is the map and started the server with new file, i m on nitrado.
Any ideas ???
Is the Cake event a mod?
no - it's an event that's built into the game that gets activated a different way.
Any information on y when I access the obelisk on a new island server it crashes and restarts?
I've had this happen when the cluster had corrupt data in it in the past.
Yeah, I had to delete the saved ark file and it seems to work now, I also mostly play single player and had a creature uploaded that refused to spawn but for some reason I spammed it and poped out.
I think I fixed it, dont know how tho
If it's single player, people aren't gonna really know here - this is for unofficial servers that people self-host
You probably want to enable -NoTransferFromFiltering on any server you run, to prevent people from being able to pull things from their single player saves. Otherwise you risk people bringing in admin guns and destroying everything, etc.
It was for a unofficial server. I just played singleplayer.
The issue was i couldnt access the obelisk without crashing my own server i run, because I also play single player
yo im having trouble trying to connect my friend to my server it keeps saying that im timed out even tho we have the same mods and we tried whitelisting, why won it connect cause i have connected to my friend before
any help?
anyone still having issues trying to connect to their unofficial server even tho the servers up
yes, this killed Halloween plans tonight for us I'm afraid
we are Xbox client to self hosted, there is an error that pops on Xbox right after connection and then it goes to lost connection timeout error
cant catch the error
Is anyone having issues with the Fear Evolved event where the event Dino’s are overspawning to the point of not being able to do anything? On our Ragnarock server, mousers are everywhere and we cannot seem to kill them. Zombie wyverns are overtaking the ice wyvern spawns and there are like 500 wyverns on the map.
Anyone can help me with orp for pve server? I thought i had it set up, but someone just lost all their stuff.
Is it because this is 0?
PreventOfflinePvP=True
PreventOfflinePvPInterval=0.0
Is there a way to enable the fear ascended wild Dino colors without the craziness of the mod itself?
How do you turn on the Extralife colours and bonus saturation or colours etc on nitradro servers? Already have Halloween on obviously.
should be in the event dropdown menu
My server has been insanely laggy for approximately 10 hours or so. Didn't change anything or add any mods. Played this morning & it was fine--no lag for me or my tribemates. Had some IRL things to do so hopped off, tribemate got on around 10 hours ago and was experiencing extreme lag. I got on about five hours ago and experienced the same extreme lag. The server's been restarted three times at this point and still the same issue. Ping looks good (~80 right now), no mods have been added or settings changed. My tribemates and I are all with different internet providers and regions and are experiencing the same issues with lag, so it's not client side. Not sure what I'm supposed to do here or if anyone has any suggestions. Trying to interact with anything in game (refrigerator, dinos, vaults, etc.) takes 5+ seconds to have any type of reaction, but typically is more like 10+ seconds. Any suggestions?
Can you cluster together PVE, and PVP servers? 
yes
pve/pvp is a per server rule and clustering has nothing to do with server settings outside of cluster id related info.
but can u transfer
yes, the pvp/pve part is tied to the server not the player. You cant transfer from pvp to pve and perform pvp.
Hm.. Thats tough.
Ideally id like to be able to make pve players able to transfer to pvp to fight when needed.
you can...
Ohh I read wrong.
Do they have a mod ID for Extra Life? I cant seem to find one and I need ot run this on my private server.
when you transfer to a pvp server you are now pvp, when you join pve server you are now pve. whether you can perform pvp is determined by the server not the player.
its just a start param, no mod.
Well, in Evolved when this was the case. You couldnt transfer items/characters back to PVP from PVE.
I used to run clusters on PVE/PVP.
I was curious if ascendeds changed this
So, you mena like -ActivateEvernt=ExtraLife?
Correct
Thank you. ❤️
It wouldn't be this exact typing but thats how it would function.
that was a per server setting, there is not tag data indicating whether an item or entity is pve/pvp the only limiting factor is server game rules and transfer rules. pve vs pvp does not change anything with transfering.
Yes. I'll make sure its correct before I execute. I'm running my cluster on linux so I can drop it into the custom args in the yaml on POK ARK server manager I think.
Haha, one of my constituents was literally reading it off to me in voice as you tagged me. Aces.
🫡
goat ^
Hello im new here seeking help bad with my private server im running off my old pc threw steamcmd. I just wanna be able to test some admin commands spawn in sum of my old tames i used to have on my old server
I have whitelisted both my ids and added them in the administrator tab also and i turned on RCON in ASM. Then saved the ini and restarted the server still wjen i press tab or the tilde key nothing happens i dont see any console when im paused
I have 0 mods installed so no mod could be interfering like chat gpt said ive been trying for 3 days now website after website video after video. All says press tab but it doesn't work
Hi Again, sorry for tagging you in a response, I changed these and I would just like to confirm if anyone else got this, i set the HeliRate Cap at 0 but in game they cap out at 90% is this normal or would there be some other setting capping this as wll ?
you shouldnt see the consolewhen paused, should just be a black bar at the bottom of your screen when you are in game and if you press ` again it should go over half your screen
Hey there, what could be the problem that I can't join Ragnarok on a specific cluster but can on others? I can also join Ragnarok in single-player mode.
Anyone help me with ark survival evolved mods i have problem on finder deluxe mod don't show me boss like origins or boss from Prometheus i am playing single player
yo does anyone know which items become transferable when AllowBossTributeTransfer=True is active, compared to =False?
Hello, my server does not want to update, so I wanted to reinstall it, but I get this message from the Steam client. Does anyone know what this means?
Waiting for client config...OK
Waiting for user info...OK
Error! App ‘2430930’ state is 0x6 after update job.
Unloading Steam API...OK
‘linux32/steamclient.so’ -> ‘../.steam/sdk32/steamclient.so’
'linux64/steamclient.so' -> '../.steam/sdk64/steamclient.so'
Hello,
Today I noticed some abnormal spawns:
Wyverns in the snow biome on Ragnarok,
Kairukus in the green obelisk lake on The Center,
and Gigas in the corrupted zone on Extinction.
Yesterday, I activated the Fear Ascended event. Could this issue be related to the event?
I’ve never had this problem before.
Yea wyverns spawn there and gigas as well. Unless the gigas aren't corrupt and the wyverns arnt ice
Yes, I know — but not hundreds of them and is fire wyvern i can post a screen
Yea post it
I’ve already done it with DestroyWild, but they were all fire Wyverns.
What u went up to them and it said fire?
Yes, I’m an admin on an unofficial server and I can confirm that they are indeed fire Wyverns and not ice.
But the fact that so many spawned right after the Fear Ascended mod was added is quite problematic, especially with the tons of Kairukus on The Center and tamable Gigas on Extinction.
I found about 20 Gigas before using DestroyWild on the entire map.
I have no clue then
As soon as I want to play valguero my game crashes but every other map works, can someone please help?
is this server for ark evolved or ascended
u can ask question for both
How we do add the extra life event?
Can confirm. Fire wyverns (and alphas) over spawn on unofficial in snowy area on Ragnarok. We have the same issue after adding Fear Ascended. It was fun destroying all of them
If you're running a server on Nitrado - stop your server, go to general settings - it will be a drop down under active event - select extra life, restart server. I also suggest doing a wild dino wipe so all those colors can pop up
anyone still having issues connecting to their servers? My server shows under the unofficial tab but its dimmed out and it wont lemme join it and when i click on it the only button is refresh not join. Refresh doesnt do anything and i want my server that i paid for....
Hey guys, my friends and I are doing a little private server with a lot of new players. They were getting murdered on the beaches by the mouser dodos and the zombie dodos. I saw somewhere online you can stop the spawn of a certain type of dodo. Is there any way to stop these guys from spawning so they can enjoy the event stuff but not get murdered while learning how to play? Couldn't even kill the low levels, it's really annoying
It works. Just need to set it up correctly had port forward the server port. I have all of them working and recently added Valguero. Try renaming/deleteung the steamcmd folder. It won't delete any of your saves but it will force a fresh download of the game. That fixed my server issues when they were not appear in the game.
We activated the Fear Ascended mod but the mousers and the ectoplasm from ghosts doesnt seem to be working. any help? theres not even the blueprints in the smithy
Hey I have a ASA server with around 10+ players. After this update on steam none of us can join the server for more than 2 minutes with "Lost Connection to Host". It never happened before. Any help would be greatly appreciated. We all cleared cache as the announcement said but its still happening (i got my issue fixed)
Hi, same issue here, we can use console commands to join the server, so port forwarding etc is fine, reinstalled epic launcher etc to fix the certs and all that. but I found in the player save folder, cached entries from ASA CDN , showing a list of banned IP's , turns out my whole ISP, all their blocks, is on the ban list for banned servers (not player bans) . lol. just sharing as a fyi
I had the same issue
It happened after this update?
i got it fixed apparently the server wasnt updated with the new ark update so i had support from my hosting server to help update it and it works now
try this which fixed my issue in your SteamCMD bat. And reinstall the dlc from steam
SteamCMD\steamcmd.exe +login anonymous +force_install_dir "%~dp0server" +app_update 2430930 validate +quit
start "" "%~dp0server\ShooterGame\Binaries\Win64\ArkAscendedServer.exe" Ragnarok_WP?listen?Port=7777?QueryPort=27015?RCONPort=27020?bRawSockets?MaxPlayers=2?SessionName=test?ServerAdminPassword=test-NoBattlEye -USEALLAVAILABLECORES -log
I have made a cluster.
I have two maps
Both cluster ID are the same and all transfers are allowed
However when I try to switch server it isnt showing up
This is a nitrado hosted PS5 server
Please help
I have summer bash mod in passivemod list and fear evolved in the loaded mod list. Summer bash music plays, fear evolved doesn't. Any ideas? Fear Evolved is still the active event in the game. But hearing summer bash on every start gets really old
Remove the Summer bash mod? You wont lose anything.
The assets have been in game for over a year.
I had to remove Resonant Shop mod because it is causing hard crash to Xbox. If someone have an alternative way of adding an in-game shop it would be so great...
Does anyone know a way to save video setting if the only place where it won't let you click is the save button? I have tried to tab but it doesn't work either
So me and a friend, @fringe rain is having an inventory issue on our Nitrado Server we dont know what is going on we have tried restarting the server it solved the issue momentarily but continued to happen soon after. The proble is items just disappear in player and item inventories, even blueprints and crafting option. Anyone know what to do?
hi i have problem with fruit z left click show only animation but on right click evrything work correctly wht i must setup on ini to work correctlly?
We got the opposite problem on my server. The whole map got taken over by mousers and new people can't even spawn in and be alive for more than 5 seconds 💀
Any fix for a huge, massive, ridiculous wyvern spawn in the murder snow on Rag?
Remove all mods
Restart your game
Reinstall mods
😆 did that 20x today… I lost everything including my mount
could also just be the filter 
You restarted the game before readding the mods?
Mousers killed my lvl 200 flyer
Not sure how you lose them when the game isnt running
they are having a different issue
Got stuck in lag… and died and dc’d
Yeah im pretty sure she responding to the wrong person
My server did an update yesterday… it’s modded
When I log I can’t even move
Anyone found a way to increase tick rate of servers?
do you mean reduce lag or actually speed up the server?
if the speed of the things happening in the server use the slomo command
Why does the loading on server PvE or pvp take so long anyone know how to speed up loading on game time
ASE?
Yeah
gonna assume u on the aquatica version, just switch to preaquatica beta
How to switch
on steam library, right click ark, go to properties, go to betas and select preaquatica beta
for asa, there's a console command. it's smth simple like NetTickSpeed. for ase, i have a whole guide that works really well
I want to start a server for 10 people, I am brand new to server setup, so I need some help. What provider should I use, and how would I add mods to it? This is for ASA, and it needs to be crossplay. I play on PC through microsoft.
Help me sever legit ARK Mobile
Same with me, anyone else experiencing this? Insane lag after running smoothly for weeks and no changes except the recent update….
-ServerTickRate= add to start commands, put the rate you want in it
Mine ended up being someone left creatures breeding and it was a mess of creatures
Dang we already checked that
Anyone know if there is a way to rcon game time?
Does anyone know why the game crashes when opening the inventory? I'm playing on PS5. Is anyone else experiencing this?
Anyone know if Ascended accepts HTTPS for dynamic configs? The wiki says you must use HTTP, but that could be remnants from ASE and finding an HTTP web host is not really a thing anymore.
Ark communicates over UDP, cannot have encryption. It's all config files anyway, there's no reason to worry about man in the middle attacks.
Become your own HTTP web host and you won't need to worry about it, point it to a local http server
Ok, now I just gotta figure out how to do that, lol
You've got this!
Can anyone help me here?
as far as providers, it just depends on which one has what you're looking for at the right price. best way to do it is host a free dedi if you have a spare pc with a decent cpu and ram. the server config wiki.gg has all the info you need for how to add mods and config your server. however, if you go with a server host, third parties have their own interface for server configs and they usually have guides on how to use it
I will have to use a host, so which one would be the best for ~10 people?
If you're talking about ascended, your only option as far as I know is Nitrado. Someone can correct me if I'm wrong, but I believe they have exclusivity on hosting.
u can still selfhost a dedicated server on your own machine, or a virtual pc
thank you guys
Does anyone have experience interpreting server crash logs that could give me some guidance? I have a server that was restored from a backup and it crashes when I spawn in.
Okay - Turbo dumb question. What the heck is the difference between ASA and ASE besides graphics remastering for ASA
Hey probably a silly question, but any idea how i can make the dedicated server open it's terminal/console inside Windows Terminal instead of a separate conhost window?
not sure if it's the right channel sorry lol
Any way to change camera height default? Like server side so it’s not in our chests lol
That would be nice.
Hi guys, how do you manage the .arklog and .arktrade files which are generated now while servers are running ? They appeared with Valguero's release. I'm tired of deleting hundreds of .arklog files each time I stop my servers. I keep .arktrade files which are less numerous because I'm afraid they have some importance.
If someone found a way to get rid of them, please let me know 😅
cron job / scheduled task depending on platform, couple of lines of bash/powershell to pull the list of files & delete any older than x minutes
Used to do this back on ASE to keep everything cleaned up & copy a backup of the save files to external storage
Does anyone know if it's confirmed rcon gettime doesn't work with ASA?
can someone help ive been stuck on this loading for like 30 minutes why wont it load its called primalgamedata_BP
Anyone else do the most recent patch and now servers won't start?
Yes, same for me. Updated server and now it doesn't start anymore.
anyone use astraeos mythological creatures ever seen a cyclops saddle BP? is it in the pool or got to add it manually?
ask in nekatus discord
Im having the same issue
Everyone that has said they are having the same issue also are members of the CS discord page. I’m wondering if it is their update that did it and not the Ark patch. We did both at the same time.
I am new to this and am using Acekorneya image; having the same issue. Is that related? 🙂
We use Ace Korneya, also
Ahh it could be, I did get a message in my API log referring to an AppID. Weird thing is it didnt match the Mod ID
Interesting
Here's the message: Setting breakpad minidump AppID = 2399830
I’ve posted in that discord. We’ll see what happens.
I tried to start the server without CS, but it also does not startup.
And before you say anything about drivers or verifying the files i did all of that thrice
I created a new instance of TheIsland and it's also stuck on a log-less loop. It just keeps repeating LogMemory: Physical Memory: 3091.07 MB used, which obviously means that it is stuck somewhere and not fully loaded.
Google's Pro 2.5 LLM is telling I that it might be a Proton issue 🤦♂️ Maybe it is true, maybe not. It then provided I some CLI parameters that didn't work 🙂
I will give up for today. Tried increasing vm.max_map_count and tried to update the image, but still does not startup.
Wonder if rolling back the server version will help?
How does one change the max level of the ghost dinos in the Fear Ascended, our server has max level of 300, the ghosts only spawn in at 150 max level.
I believe that it would, as a temporary solution. I have directed my aim to update proton to GE-25 by altering game scripts. I'll update you on how that works out...
Hope so. I'm doing it atm. Will let you know how it goes!
remove the added dll's and it starts up with proton 9
Added ShooterGame/Binaries/Win64/steamclient.dll (19.61 MiB)
Added ShooterGame/Binaries/Win64/steamclient64.dll (23.14 MiB)
Added ShooterGame/Binaries/Win64/tier0_s.dll (331.65 KiB)
Added ShooterGame/Binaries/Win64/tier0_s64.dll (2.42 MiB)
Added ShooterGame/Binaries/Win64/vstdlib_s.dll (582.65 KiB)
Added ShooterGame/Binaries/Win64/vstdlib_s64.dll (2.48 MiB)
waiting for it to fully start to see if it shows in game and is joinable
log is at [2025.11.04-23.28.07:363][ 23]Full Startup: 65.21 seconds [2025.11.04-23.28.07:363][ 23]Number of cores 2 right now lol
@edgy pasture This seems to be the solution! I am up and running.
what one of them 6 is doing it not sure and not testing them all 😂
but they all new with the 74.24 update
You rock!!! It worked for us, also.
they all related to steam, so who know what it might break by them not being there
but server starts and runs lol
youll also have to make sure your start script dont do a validate before starting the server or it will just download them again 🤣
Im also using a script that detects updates and triggers after a graceful shutdown. Over the last week i can see in my script console steamcmd runs the update and there is no errors, but at server launch it is still booting the previous version. Anyone experiencing similar?
I will give this a go
My servers are running CS, and all loaded fine.
This worked for me also. Thank you so much!
Anyone else have an issue where no Mousers are spawning on your server?
All other event stuff is fine and zombie dodos are here but no mousers
Help me sever legit ARK MOBILE 1
@edgy pasture @celest halo @iron current @coarse ocean
FYI my bf posted the DLL info in AceKorneya’s Discord and he has modified the script to remove those dlls. There shouldn’t be a problem anymore.
Did anybody try if admin spawning an ice worm male does something on rag?
Hello, does anyone here have knowledge on how to set up clusters? I've been trying for the past 2 days but I can't figure out why i can't get it to work
i have 40 gbs free and its a 1gb update and i dont have any space on my storage cuz its only 250gb so i cant free up anymore what do i do?
Your on about the client right?
Does anyone have an idea how to enable building in the aberration portal area in ASA? I tried to set bIgnoreStructuresPreventionVolumes=True both in game.ini and gus.ini and enabled pve cave building
Size of the download don't matter you still need almost the amount free that the game takes up for it to make copy's and patch the files the update changes
Nice, don't effect me though I don't use any public available scripts or proton CE, I use normal proton right from steam and my own Ansible playbooks
Hey, we had a late night investigation session on my installer and came to the same conclusion/fix. Any details on what that Steamclient library is doing in there though? Removing just steamclient64.dll is enough to do the trick, but I was wondering why they added it.
It WC I don't even think they know why they do the things they do half the time 😂
guys do u know what if i try to join server its infinity loading then say connection timeout then that i already join
These updates almost daily annoy the heck out of me because I spend 5 to 6 hours patching on steam. Is there no way to speed it up? The only way I patch now is leave the computer on over night with a shut down timer. (Pity steam don't have an uption to shutdown computers after a game is installed but owell) But yeah, anyway to speed this up?
I have an ssd and its the plug-in ones that go into the motherboard.
It shouldn't take five hours. Chances are that you're using the same drive for other stuff at the same time.
Either the SSD is going bad, it's capacity is nearly full, or it's a drive you're using alongside other applications.
I'd recommend buying a second SSD specifically for servers only. It doesn't take me more than 15 minutes to update 6 ark servers at once through SteamCMD.
I'm getting an older server, with dual Xeon 3.0ghz 12 core(E5-2687W v4), 512GB ram 2400. Will this be manageable for a 6-7 cluster of ASA ?
Yes I run dual 3.2 with same ram and currently have 12 maps with mods going and plenty to spare
how i can add extralife to my dedicated server?
I’m having issues with memory leaks on two maps that are in the cluster I’m on anyone know how to fix it we have tried everything it only seems to happen with modded maps normal maps run fine
im loooking through my ini files to try and change my imprint amount multiplier i cant find the existing multiplier can i just add BabyImprintAmountMultiplier=x to my ini file
Hi! My bf want to get a Kaiju Mod but he doesnt know how or where to get it, anybody knows?
Hey all, just seen Wolfe admin Mod is not continuing on. So looking for mod that is similar to use on the server. Any ideas?
It's not a multiplier, it just ask the number of imprints to 100% so change that to 1 if you want 100% in one go.
My mods don't install, as if there is no internet, but there is. How can I fix this and what should I do?
Anyone good link for good unofficial sv dm me
There's Gaia one and a one called resonants
@halcyon lotus try ours welcome to Jurassic ark
Deutsch / English Ark Global PVE/ PVP /Team & Player Advertising
🇩🇪 🇬🇧
Crossplay link in profile
Awesome Ark Tools gets high praise.
Might try that one.
if anyone needs help setting up servers i can setup 90% of all servers within 10 minutes
Step 1: find kaiju mod on curseforge.
Step 2: look in mod link/description for mod ID number (example fear ascended is (877752))
Step 3: go to your launch parameters and add "-mods=" followed by no space and the mod id of the mod you want to add (example fear ascended is -mods=877752)
Extra: if you want to add more than 1 mod simply put a coma "," after the first number followed by the next number with no space.
Gotta be a bit more specific than that. Is it ASA or ASE? are you sure your portforwarding is correct and that your network hasn't seen any changes? Can you see your server in the listing or can nobody see it? Are you timing out? Were you ever able to connect to your server or is this the first time/ fresh setup? There's alot of ways to get a connection error, any bit of info helps identify it.
Sounds like it is a mod causing the leak. If it is making the server unplayable I would recommend the following.
1: make a back up of the server as is and put it to the side somewhere safe (just incase)
2: go through and remove 1 mod at a time starting with the least impact full (ie DONT start with structures/creatures cause they will go poof, although along as you do step 1 you can always copy paste your world data file back in from your back up)
Step 3: rinse and repeat, let the server run with a mod removed and see if it gets a leak until you can determine which mod it is.
Step 4 l: either find an alternative mod/ report it to the mod creator and hope they fix it soon.
Just note its the Project ID you want not the ID in the URL 🙂
Oof, yeah you are bottle necking at your plug ins. The best you can do is a raid0 with nvmes, the worst would be a low rpm HDD. Satas are step above HDDs but below m.2/nvme. Your read speed will determine your loading and file transfer speeds while your write speed will affect your install speeds. Hope that helps explain some. If you want to know more about where your drives sit and possible solutions feel free to ask.
Thank you, for clarifying that, I will update the post for that. Rip steam workshop ids.
Is no problem and I know right! much preferred steam mods
Read speed effects updates more then write it has to read the files to find where to patch them
Hi i just installed ark on steam after having it on xbox game pass for a while and im trying to download mods it keeps saying the i have no available space for mods when i do. can anyone help me out on what to do
To anyone's servers suffering from Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000000000091 ASA Ascended Dedicated server crash bootloop/tickloop on either windows or linux/debian, (I'm looking at the one persons post from 2023 in the discord here :P) I believe I've found the issue. Certifications. Because of course it is.
(link removed by HLNA bot - github user cdp1337 repository ARKSurvivalAscended-Linux issue #37 post 9)
[leaving this here for any future searchers]
Yeaaahhh, you right. Didn't think about that, forgot staging/manifest.
i need help with ark survival evolved
what's up?
i have a really bad issue Im playing Ark Survival Evolved Valguero i load in play for 15/20 minutes then i die to a dino i expect to be able to spawn in my bed but for some reason my bed doesnt show up and it only says start new character, im playing single player with mods pc
list of mod? and are u on aquatica or preaquatica?
does your game have hardcore turnned on?
No as I can create a new character it forces me
Idk how to check aquatics or pre
it's the version number in the main, menu. 360 is aquatica, 358 is pre
I’m not sure
that's what hardcore does, it forces u to make a new character each time u die
Oh I didn’t know where would I find hardcore
in the setting before entering a map
Is it a tick able box
yes
I’m re downloading game it’s 40 percent done il lyk
Well what I have noticed when I am patching ASE and ASA my HDD usage is at 100%. But heres the thing. Steam and ASE/ASA isn't installed on the HDD. All are installed on m.2/nvme drives. Which confuses the heck out of me. The one thing I have discovered that works is when I physically plug out the HDD install speed dramatically increases. Once finished I plug it back in but the confusing thing is what one has to do with the other. But I do have games on that HDD which were designed back in the day for HDDs (such as the original starwars battlefront and State of Decay to name a couple)
Steam just does that sometimes, using the other slower storage devices for no good reason
Steam prob using it as the download/cache location for the patch files
pause g can i forceibly take myself pre shit?
what?
well their idea of ase dlc you mentioned pre or current
so i can pull a skyrim and force my game version backwards?
its easier, pre-aquatica is a beta on steam.
well nobody would ever actually play it killing their own game both ways is kinda sad
this makes me very happy could help people host that way instead to avoid the shit show 🤣
it was added because major mod issues.
if you aren't playing on aquatica basically no reason to be running that build lol
Snail kill ASE with Aquatica, not WC
wildcard doesnt exist its a subcompany of snail now due to the lawsuit we paid for them for with scorched earth hints why ASA is run by a chinese mobile gaming company now
it caused the mod issues*
WC is with snail since like 2016
thats not how it works.
snail and wildcard are still separated. they own it yes, but they don't have the entire say of it.
thats what scored earth was for
it'd be a lot worse if snail had final say lol
you should learn your own company then i should not know more then some moderator
december 2015/jan 2016
its only been worse since 2016
u only enjoyed the first half year?
really hasn't. if you think DLC existing is bad then you should just stop playing ark lol.
things have been progressivly downhill
there is no possible way ark was gonna last 10 years on just the main game
shark cards. their main money maker
world of warcraft swtor final fantasy
none of those ever changed ownership. they were all the plan
those started out with paid monthly...
again DLCs. minecraft is really the only one but now they have the marketplace on bedrock. and plenty of DLC throughout its console time.
worse yet i support ark as an idea more now then a game it was good but you guys messed up bigtime
this is coming from someone who gifted the game to more then 20 people included scorched earth
can always stop playing it lol.
lets get back on the channel's topic
you were put in your place all i care for your welcome to lose an debate next time find more relevant information or learn more about the company then speak goodday
how is that a win, pumpkin is just doing his job as a mod
Tried that even with a fresh wipe it’s still doing it it’s only modded maps that we are having issues with all the base game maps are fine. The two maps only stay up for a minute or two then go right back down they take 40 minutes to get out of the ticking loop svartal and astreaos are the only maps that have the issues
Hmm, I dont know what to rcommend then other than validate files. My astreos map has been fine but It doesnt have any mods other than the fear ascended. best of luck tho.
Unofficial mods are not downloading. What should I do?
Are you using -mods=<mod id> from curseforge in your command line?
When I log in to the server, I download mods
Are u running a nitrado server or single player
.
Also anyone running admin panel the mods being discontinued.
Hey on my server plant spieces z fruit not work when you want use left mosue button
any ide what i must change on ini or this is broken
bcs ppl can't tame yi ling
validating didn't work but i'm going uninstall and re install the maps and see if that fixes it
If you have issues with svartal, you could also see if the mod owner is aware of mem leaks for it, cant as much with astraeos as its now offical and no mods needed
Any one having gigas way over spawn on the island and sometimes rag since the fear ascended started
Happy friday everyone, anyone know how to get custom paintings working with dedicated server? I've found a few suggestions, but none of them seem to be right. If I save a painting it creates the folder \SavedArks\map\ServerPaintingsCache but putting the custom pnt in there never show up even after a server restart , even if I overwrite one of the ones created by saving from in-game. Any pointers would be appreciated
when are the transfers to valgero open?
When ever you want them to be
I've reinstalled the game 4 times today, deleted mod folders , deleted every folder , and redownloaded the game yet i still cant install fear ascended as no "mod storage"
WHAT DO I DO
** STEAM**
Go to your mods folder (client) and delete everything, oh wait you said you did this lol
Had this the other day and doing this fixed it for me
did it work im having the same issue with my ps5
nope
Anyway to increase the club ark reward points ? Like a multiplayer or something
I would love to have npc mod
On my server , but need them
To be fierce . Can tame
Big animals , wear good armor . Houses with turrets , attack regular someone who can send me
What in need to put in ini file
can you still activate fear evolved on single plaer ase
not fully
Anyone know the rcon command for retrieving server time?
Anyone else having problems downloading stuff from ark data to another server on same cluster. Keeps crashing. Month ago it was fine and now isnt.
Opposite problem here. There just aren't enough gigas, takes about 4-5 hours for one to appear. It's pretty annoying
Anybody have any suggestions. Unofficial server and the wyvern spawns on rag are BROKEN. I'm talking clusters of 50-60 in several places in the snow. And not just ice wyverns. All of them. There was 15 alpha skeletal wyverns in one spot. I've done several dino wipes. Not sure how to fix it.
Use a spawn blocker mod or edit your inis to decrease spawn rates/weights.
Even if this just started and the server has been going since rag release? If it were the spawn rates/weights wouldn't this have been an issue before? It started with the fear ascended event so I'm wondering if its bugged for us
It is the mod, you can remove it to mitigate if needed.
Not sure where to ask this, but does anyone have a recommendation for a replacement mod for "Admin Panel" by WolfeModding which they just took down?
Search up "Awesome Ark tools" mod, it has some high praise
At first glance it does look pretty impressive, if a bit less intuitive. Thanks!
I´m having trouble joining a private session in Ark survival Evolved Island Patch 360.35. We are two in the same household that are trying to play together. It´s been a few months sience we played and it worked fine - now it dos´nt.
Can anyone help?
I would place a spawn limit on the zom wyvs. I believe it has to do with regular wyv spawns work by setting each wyv to a 33% limit of the spawn slots. But with each wyv having a chance to be a zom then the zoms add to the overall count and therefore the regular wyvs will never hit the 33% quota cause 10%+ of the spawn is zoms so even with equal distribution the regular wyvs will really only take up less than 30% which the game then keeps trying to spawn more till they are over that 33%.
Id add the limit to the wyv spawns and it can be removed after the event.
What do I need to put in my nitrado config to enable all custom cosmetics? None of them are working right now.
Hi
Remove the customcosmetics ini line of code
There’s a setting in general to turn on also
It works best without it
Remove
CustomCosmeticWhitelist specifically
Its no longer needed and just messes things up
Ok so the setting in nitrado itself should be enough now?
I dont believe it is.
I believe its something you add in your ini - if you never added it, then you have a different issue
In the gameusersettings.ini I just have this: bDisableCustomCosmetics=False
And the setting itself is turned off. Is that correct?
Thats fine.
What cosmetic isnt showing?
I just updated it to this. I'll see if it fixed it. It was every mod I've purchased, so I assume I changed something that blocked the official whitelist somehow.
Nope, didn't work. 🙁 Some are working, but everything I"ve purchased isn't.
Do other players have the same issue or is it only your account?
Oh wait, they are now, it just took a while to load after I logged in. I think I'm ok now. TY
TYVM for your help
Np have fun Tori 🙂
Can I remap and change mod Dino spawns etc using Beacon? Specifically having spawn issues with one mod. I’ve never messed with spawns before but I’d like to try and fix it. I know I can edit existing spawns for vanilla dinos but not sure about mods.
Unless the modder has posted spawn container info, you are kinda stuck.
Which is unlikely to say the least. So best I could do is create completely new spawns,
Yep.
Tho if you are currently running the Fear Ascended node, its likely blocking some spawns and will probably fix issues if you remove it.
It fixed one, the other the mod author stated he knows spawns are busted. Appreciate your response!
Everyone else running unofficials getting overspawns on Valguero, Extinction, etc? (I don't know what other maps this is being affected)
I´m having trouble joining a private session in Ark survival Evolved Island Patch 360.35. We are two in the same household that are trying to play together. It´s been a few months sience we played and it worked fine - now it dos´nt.
Can anyone help?
I’m looking at Sunity Hosting for an ARK server, but I’m not sure if it’s even real. They claim fast servers, crossplay, DDoS protection, and mod support — but does anyone actually know if it works?
If the mod or anyone else can, please answer — is Sunity Hosting legit?
They are referencing the wrong mod host for asa, so my guess is they dont know the game.
Likely a scam tbh.
On Xbox, my server won't show in the server list even though it shows for people on PS5. I can connect via console command but I can't transfer my survivor within my cluster because no servers show in the transmitter. Any ideas for a possible solution? I am self-hosting.
been struggling for a few days now setting up a dedicated server for ASE, trying to use playitgg for tunneling for one of my friends to join, cant seem to get it working and the server keeps saying timed out when trying to join
any help would be appreciated so much
So I added fear ascended to my server but now it’s saying I have zero mod space and I have t downloaded any mods or have any mods anyone know how fix it on a ps5
Does anyone here have server hosting experience? Specifically on a dedicated hardware server host such as OVHCloud?
Anyone having issue with the Memorial on Valguero?
Anyone know of a way to increase club ark loot quality?
If others can see it and you cant likely a filter is incorrect so not showing it or you dont have nat loopback enabled
My filters are all set right. I know nothing about nat loopback so I'll look into that. Thanks.
How do you get help with a servr through the Nitrado site?
The discord is just confusing and silly
Is anyone know if the problème for add more creature in your world and then you can’t launch your world solo is normal
trying to figure out if we have a mod conflict(we just installed immersive taming), a player that's trolling and putting tames on aggressive and then unclaiming..
or if something's changed in ASA fear ascended vs ASE fear evolved..
we have unclaimed aggressive zomdodos running around on almost all batches with mousers. is that normal for ASA fear ascended?
in ASE fear evolved after killing dodorex, zomdodos became passive and unclaimed.
Anyknow know if killplayer is a valid rcon command? 🤔
update: tested in single player.. apparently in ASA the zomdodos stay passive until provoked. you can still claim them, but they do become aggressive..
loads of server heavy zomdodo vs mouser fights everywhere on the map after killing dodorex
Would anyone know what would cause an exorbitantly high ping?
Ok guys how do I fix this I'm on PS5 n after the game crashed last night it says I don't have enough space to erase mods done it dindt work I've also deleted the app n redownloaded it twice still same does anyone kw how to fix
to be fair its only server heavy when you render in those areas. so 99% of those fights aren't actually happening and when it is, its not much different than any other wild creature fight
is there a way to disable crypod decay timers without mod?
Is anyone else having an issue where when they die there is no bag to claim? Even if there's still a corpse there just is no inventory to reclaim. Is there a fix for that?
I added max levels, but i forgot to add engrams with those levels. Anyone knowledgeable enough to know what I'm missing?
Last line is ExperiencePointsForLevel[398]=3653904200)
I need help and i dont know any further im playing on a non dedicatet server with a friend and and most of the engramms from other maps (like oil pump and gas collector) are like not available fpr me and are black, only my friend can make them bc he is the host probably i bought every thing on asa so can someone help me there if theres anything
Hey, y'all. What settings do I need in the ini files to make it so non-tribe members cannot access storages and cryofridges? PvE Dedicated server. Thanks! (Figured it out: the bForceAllStructureLocking and ForceAllStructureLocking are not the same thing)
Hello, I'd like to replace the ice wyvern spawn with the poison wyvern spawn, but I can't find the ice wyvern ID for ASA.
I didn't look tooooo hard, but did you try: "Wyvern_Character_BP_Ice_C" or "Wyvern_Character_BP_Ice.Wyvern_Character_BP_Ice" ?
Does anyone have good npc ini files where they are bit more powerful , riding dragons , iron flask bases protect with plant turrets and they actually attack
Hmmm server won't seem to reset or restart even after stopping it it just won't go down
I am looking at this app (Bea*con) and it says that there is an ID for spawn weight adjustment, and it's just Wyvern for both Fire, Ice, and Poison Wyverns. Maybe it's a location-based spawn within the engine. I don't know any more.
Try NPCReplacements=(FromClassName="Ragnarok_Wyvern_Override_Ice_C",ToClassName="Wyvern_Character_BP_Poison_C")
Does anyone know if there is a way to increase the amount of tek bunkers per tribe? Default is only 3 and similar to a lot of other "patreon" servers, mine's one with a single pve tribe with all discord members who are mostly builders wanting to get their hand on the new build structure..
Here is what I have: GameUserSettings.ini:
LimitBunkersPerTribe=True
LimitBunkersPerTribeNum=4
There are other configs for bunkers, too.
wow, that simple? thank you very much, also from the community 😉 !!
Am I blind or is the patch notes channel gone?
Nvm I somehow hid it. Didn't know that was a thing.
Yee in community servers you can choose what you want to see now in the channels and roles area 😛
It means you need to download the other maps. Like scorched to get scorched engrams
Omg i didnt realize that neither knew that thank you made my day better❤️
hey guys ever since the val launch my stacks have been messed up on val and extinction i just started to get into this stuff where would i find this?
Ok, I have finally got my ded-seevers working on the internet. Had issues with portforwarding because of my modem had a router in between that and the server. Forgot that fact lol. Now I want to enable rcon and see about getting that working. So here is my question. I saw where it sais to use a port number 27020. Do I need a unique number for each server running a map?
Yes. Your servers in a cluster share an IP addy, and differentiate between each other by Port number.
In the server's GameUserSettings.ini is this setting, under [ServerSettings]:
ItemStackSizeMultiplier=1
1 = say, a 20 stack of O-poly. =2 would be 40 O-Poly per stack. If the = value is different between servers, you will have inconsistency.
alright im going to have to look. so items stacking are singular? i usually have mutton stack to 1k and they are stacking to 1
same with honey and kibble to 400
Hi guys im playing valguero right now and trying to get some rock drake eggs but i was in the radiation zone right now but there are nobrock drkaes or nests doe any one know what could be tge problem
Looking for someone to help with 3D assets and modding. DM me if you have one or more of these abilities please!
Does anyone know if ASA changed the way specific dino stat leveling works in the Game.ini file?
Im specifically talking about like
"PerLevelStatsMultiplier_DinoTamedQuetz_Character_BP_C[7]=1.5"
which apparently worked in ASE as of early 2023, but does not work in ASA. And the alternative of writing it like this:
"PerLevelStatsMultiplier_DinoTamed[8]=(ClassName="Quetz_Character_BP_C",Multiplier=1.5)"
forces the game to delete the line from the .ini file and replace it with the standard one affecting all creatures.
I know that we can modify the base speed of specific classes of creatures, as well as damage and resistances, etc, but Im specifically looking only to change the rates at which certain stats level up on specific dino classes.
Im fairly certain I remember being able to do so in ASE. Like 95% certain. Im just wondering if it came later, and when they resorted to the OG build of the source code on starting ASA (when it reintroduced all those old bugs like flyers loving 50,50 coords or getting stuck in the air with 0 stamina), if it erased that as an option for server configurations.
How do I increase tribe tame limit again?
I haven't tested these, but try out these in Game.ini:
ConfigOverrideItemMaxQuantity=(ItemClassString="PrimalItemConsumable_Honey_C",Quantity=(MaxItemQuantity=400,bIgnoreMultiplier=true))
ConfigOverrideItemMaxQuantity=(ItemClassString="PrimalItemConsumable_RawMutton_C",Quantity=(MaxItemQuantity=400,bIgnoreMultiplier=true))
So- is it normal for a tent to just- disappear- and everything inside while your away?
Im playing on ps4, no assended or anything
I will admit i havent played in a long time and started playing again
And when i died and logged off for a bit, i came back- made my way back to my spawn- and my tent was gone-
This is everybody's reminder.... please please please make a back up drive with your server data. I just had a drive failure and now gotta drive across the country to see if I just lost everything. Hopefully my RAID worked and or its just the m2.2 card thats failed. Drive failure is rare especially with modern NVMEs but the chance is never 0% Back up your stuff. 
My biggest fear
"It will never happen to me." - Me apperantly
I should probably store a backup in cloud something occasionally after hearing your story
I hope you can get everything back
Thats what I am debating doing now. A RAID drive is nice in the event of a spontaneous failure But I could set up a periodic cloud back up. Man I completely rewrote the ENTIRE loot system for EVERY map, balanced spawns and rates... all may be gone... 10years of fine tuning...
I’m sorry that sucks
hey guys, anyone got any insight? - If update is auto detected my update script is triggered but steamcmd update fails; but if i manually run the update bat the update goes through fine without issue... steamCMD win11
But I think the worst feeling is that there are players out there from my cluster that I dont have any way to contact who never joined the Discord and thus they dont know why the servers are down 🙁
Hopefully they go digging and find the discord
Hola, me llamo Oliver. Hace poco descargué Ark: Survival Ascended de Steam, pero no se abre. Se bloquea y la pantalla se pone negra, y no vuelve a abrirse. Sin embargo, si lo ejecuto desde los archivos del juego, sí se abre, pero no funciona en Steam. Cabe mencionar que antes lo tenía en Xbox Game Pass y podía jugarlo sin problemas, pero desde que lo descargué en Steam, no se abre. Mis otros juegos funcionan bien; solo Ark no se abre. También tengo Windows 11 Pro. Como dato adicional, pude instalarlo y jugarlo en Steam, pero en ese entonces tenía Windows 10 Pro.
I've uninstalled and reinstalled it countless times, but nothing fixes the problem.
I recently downloaded Ark: Survival Ascended from Steam, but it won't open. It freezes, the screen goes black, and it won't open again. However, if I run it from the game files, it does open, but it doesn't work on Steam. It's worth mentioning that I previously had it on Xbox Game Pass and could play it without any issues, but since downloading it from Steam, it won't open. My other games work fine; only Ark won't open. I also have Windows 11 Pro. As an additional note, I was able to install and play it on Steam, but at that time I was using Windows 10 Pro.
Hello 🙂 so we have a cluster between Lost City and Astreos and I put my items and dinos in the transmitter per usual, however when I go to travel to another server it gives me a "Attempting server travel, this will cancel your transfer connection, are you sure? and it takes you to a main menu but when I try to join Astreos I don't see my survivor uploaded and it won't even let me make a new character to spawn in. What setting issue would this be?? in terms of cluster
Can a VPS run an Ark map/server without any problems?
Ya, how well depends the resources you get on it
I was looking at something like this. Is it enough for a map with some mods and space for 20 players? From OVH
6 vCore
Memory
12 GB RAM
Storage
100 GB SSD NVMe
Some people say it could go well, others say it will be terrible. I really don't know what to think.
You'll very much likely need more ram then that, one map can use up to 22GB depending on the map/mods, I would not trust 12GB, space is like 20-40GB per map too, think cores is suggested 2 per map on the wiki
I wouldn't for 20 players, I use 2 cores 20gb ram and 100gb storage vms for 3-5 players
So, what's the most economical way to get started with a map/server?
Hey, does the AdminListURL is working for you?
I was setting it up month before with the local file.
After it being broke I switched to hosting it. But since 3 updates it is also stopped working
People speak highly of Dathost, but it has lag issues like almost all hosts, I imagine.
Yeah they stopped hosting it locally it seems
I don't use vps/hosting sites so don't know who's good or not
I know a lot of people are using OVH in another DC im in, seems most popular
I haven't played in like 2 months so not sure if mine is still working or not
If you use the File prefix it no longer works hehe
But using https URL also seems not to work for me(hosting it locally).
Does it have to be accessible via the internet?
Needs to be http I believe
I don't, I have a local webserver I been using for ark admin list and dynamic config since ASE days
Local hosting https gets tricky if you don't have normal certs that are not self singed, or unless you know how to set up a ca and make it all trusted by the comp running the dedicated server
so im running a nitrado server with a tribe of 2 and 4 maps installed. Currently we upload at an OB and shut down the server, switch maps, restart, and download the survivor and play. Problem is that there is a disconnect of the tribe data. Each map we have to force join the tribe. What am i doing wrong and how can i fix the tribe issue without havening to run more servers. Oh and setting up a cluster failed due to the map you want to move to is not running.
If your not in a tribe on a new server one needs to be created anyway, they are not cross cluster
https was working for month after they remove the file prefix.
Just tested http also not working.
I will go on and test a public hosting of the file.
Just to be sure the URL needs to be enclosed in double quotes, right?
Yes to quotes
before moving to nitrado from windows we had it working so all we had to do was quit the map we were on, shut the server down, change maps start the server and log in and we would spawn right where we were the last time we played that map.
If you had already made a tribe and joined it, when you swapped maps to it it should be fine but if its not then not sure and if its new new, one needs to be made to join
so on the win server when we did a map for the very first time we would upload then download and the admin would send me an invite and we are in the same tribe. once done we never had to do it again. we could just switch maps. currently the admin can move between the island and rag with the server map swap only no upload no download no force tribe but thats it only one map one player seamless change
Ive advised all I can, soz
thank you 🙂
Are there any good working color mods out there at the moment
And does some of you have ini setups for human. Npc mod so they are more strong to defeat
This channel is for discussion about unofficial (or single player) server setup.
How many Dino mods can a ps5 hold?
for some reason i CANNOT get my asa server to show up. idk if im missing something basic but its just not working for me. im going to assume that port fowarding is fine since ive been running ase servers for quite a while with no issues
Try updating your amazon certs, ports wont affect it showing
Or make sure you got the filter correct ingame, I usually set everything to all
amazon certs?
Ya amazon certs, think it says which in the wiki
which wiki page do i need to be?
in this chat?
Where else lel
i downloaded a manager that has brings certs with it but its still not showing
should i just not use a manager then?
It should still show up, manager shouldn't affect that, whats the server called?
oh its not running anymore
hold on
its started up now and its called "an island of dodos"
its on the island
Its showing
idk if this is where I post but every time I open the game with windowed full screen in my native resolution my game will freze and i will have to task manager close it as when I try to force close it on steam it doesnt work
Hey everyone
how do you disable/remove the Fear Ascended mod/event on an unofficial server?
And if I remove it, will players lose their items or skins from the event?
Thanks a lot!
just remove the mod id from the launch paramters, player will keep their stuff
what is the base max level wild dinos on a unofficial server?
(asa)
i want the max to be 150 but i cant tell what its on like i used to in ase
any1 got any ideas on why osd or viens on astreos might not spawn as commonly/slowly compaired to offcial
Hey everyone, I really need some help because this is driving me crazy. I’m hosting a non-dedicated session on ARK: Survival Evolved to play with my friend through Steam, but every time he tries to join, he gets the message connection timeout. We have tried so many different things already but nothing seems to fix it. Does anyone know the main reasons or the best solutions for this issue when inviting a friend through Steam on a non-dedicated server? It’s been happening constantly and it’s making it really hard to just play normally. Any help would be super appreciated.
Looking for a little unofficial server help. Anyone know of an issue with the dodowyvern I should pay attention to? We were able to fight it once last year, but never spawned again last year or this one.
Is anyone else getting the not enough space error when trying to update mods on ps5? I am nowhere near the 30gb limit and it keeps saying I dont have space.
hey anyone got any idea why my baby maturing speed and imprint settings are still default on my own hosted server? i have them both changed to increase the speeds inside the ini file but it does nothing
I host one as well and I had that issue last year and this year as well I’m still trying to figure it out while I work on this memory leak issue I have going on as well if I figure it out I’ll let you know
Oddly on EX red and purples OSDs wont spawn... playing in slomo 1000 and nothing for 5days
also cant spawn one.... my guess is corrupted server file so i'll reinstall the server but OSDs seem off on my cluster after the major update 2weeks back
Is using passive mods still necessary or to end the event but still retain skins and other rewards is it ok to just remove the mod?
The information on this is a bit lacking, has anyone tried with fear evolved already?
Only remove the mod when files have been merged, WC should advise when they have, if not it is trial and error, so keep it enabled AND on passive untill then
The fact is that they haven't announced it in quite a while for the past events
I know right
What do you guys usually do? Wait a few months?
Wait for others to try and confirm so i dont have to go through the hasssle of testing lol
If you want to test, take backups, remove said mod, and restore backup if you lose stuff, and add mod back too obvsly
Yeah it will have to be something like that unfortunately, kinda sucky
I don't like the passive mod thing but oh well, thanks for responding though 🙂
Good morning, Whats the reccomened way to get power to the ARK Jeton Bundle with FC
Tiket
Hello 🙂 Somebody with nitrado server here? Just wanna ask if there is a checkbox to "keep event cosmetics" e.g. after removing fear ascended. Items still there but the cosmetics (holiday) folder is always RIP after removing a mod. A player mentioned nitrado offers a option to prevent this. So means, there must be something for the INI?
Anyone else reporting crazy lag/frame drop isolated to the green obi on the center
i cant get event dinos to spawn on my cluster i have the event enabled
and spawn commands work just not wild
Hi, I'm trying to open my own Ark: Asa server. I've already set it up, but it doesn't show up on Steam when I search for it. Could someone guide me on why it's not appearing?
its never going to show up on steam, use the in-game server browser
I know, it has to appear on an unofficial server. I tried it, I entered all the addresses and everything, opened ports, etc., but it still doesn't show up. I don't know if it's a problem with my router.
I don't know if someone could lend me a hand via Discord and I'll send them screenshots 🙁
When I go to a website to check if the ports are open, it says they are closed. I opened them in the firewall and added them to my router, but nothing changed; they still appear as closed on the website.
I was looking through the GPT chat to see if I could find any help, and it says it might be my internet provider's router that has me under CG-NAT or the WAN firewall.
do we set fear ascended to passive or remove it?
Did the same to me recently something with your ports
Is not set right
Does it show up on arks side
Ports or being on CGNAT wont affect it showing, try updating your certs, gimme the server name to check if you want
my server wont allow me or my friend to join it keeps saying lost/timeout connection, is there a fix for this?
Sounds like you need to open your firewall and potentially port forward if not done that as well
at the risk of sounding a little dumb, how do i do that?
Google is your friend, he will know
i always forget about that guy! haha
sorted thank you!!
Happy daysss 🙂 Was no problemo
Guys who can help me to create dedicatwd server?...
is it with paying or without
u can host a dedicated for free
u just need the hardware
yo i searched a little bit and i got a question does it mean the pc have to be on 24hours so we can join
if u want to be able to join it 24/7 yes
u can just turn the server on when both of u want to play
Does anyone here know how to disable auto updates so i can make a weekly update for my nitrado server so i dont have to deal with these large patches that my friends and i have to deal with
we only had 1 server update this week
also no
Is anyone using APIs able to get the server live after the update?
my sister and I have been playing ark on my non-dedicated server for about a week now. For some reason, it closes Ark completely after she gets loaded in every single time. I've invited her a dozen different times and nothing as changed. Im using PC Gamepass and she is on Xbox.
@plush crystal
Guys my friend if je join me non dedicated server he always get kicked or if I join same thing
is it not then non,dedicated server
What rates should I use on a nitrado unofficial server for imprints that dont take hours?
Do I have to set it to PVE?
no
i can share with u a spreadsheet that auto calculates al raising and imprinting times
Just finished valguero on an unofficial server. Downloaded all our items and creatures into the obelisk to move to rag. Made it to rag with our characters. Walked to an obelisk and saw all our items in there like normal. Game crashed and now when logging in I have to make a new character and my old character isn't on the list. Did I lose everything?
Looking for a good resource on editing the Game.ini file to add non-native dinos
Yes please, thank you
When im in solo can i spawn any dino i want ?
Yeah
How does one spawn non-native creatures onto maps? Say a maeguana from astreos to the island via INI editting?
Hello All, im needing some assistance and have ran out of places to look and ask
You see my problem is that only one of my friends can join my unofficial dedicated ark sever, the server appears in the lists, weve checked ports, my firewalls are set proper, the server is up and stable and joinable, i can join from my pc and the one other friend that can join is on Xbox so we know cross play is working
Heres the issue, Me and Him are the only ones who CAN join. Everyone else cannot get in they are hit with timeout issues. Ive Double checked everything, my friends have double checked everything. Ports, Firewalls, Whitelisting, literally everything any guide says we have tried and has not worked.
Is ther anything anyone knows that can be done to solve this issue?
hey guys quick question , I wanna host ark se server so that my friends can join without me joining . Anyone knows how?
Can someone help me set up my ark server?
Remove the whitelists to start.
If only two of you can join the server (assuming your on separate networks), then have your other friends verify the arkascended.exe is an allowed app through Windows
So when my friend try’s to join my server it doesn’t work but when I join his it work what gives?
Hello everyone! Please help me. I can't reset the game settings correctly. I deleted GameUsersSettings.ini and Game.ini, but the settings didn't change.
When I click join on the server with a server selected I click join and nothing happens I'm wondering if there is sum kinda fix or something someone can walk me through
Dm me
Greetings, everyone.
I’m hoping someone can help me with an issue I’ve been experiencing. I have a dedicated ASA server running on my PC that I use to play with my nephew from time to time. When I start the server and the client, I set the server’s priority to High and configure the CPU affinity so that the server uses 2 cores (4 threads) and the client uses 6 cores (12 threads), keeping them separated. I’m using a 9800X3D.
Everything runs fine for a few minutes, but then (seemingly at random) the CPU affinity resets. I have to tab out to Task Manager and set it manually again.
Any advice or help would be greatly appreciated.
Use an application called Process Lasso from Bitsum
Been using for years and it's helped immensely.
Thank you very much for the reply.
Yes, I know about that application, but this issue wasn’t happening before. I always have the task manager open on another monitor, and I recently noticed that the affinity resets and I get more load on the “server cores” than I should.
I thought it might be a change in battleye or something in unreal engine that the developers migrated the game to, so it made me curious and I thought it was worth asking.
I appreciate the information, and I will do as you suggested unless something better comes up.
much appreciated.
Wish you all the best!
If you plan on running a cluster, I'd highly recommend purchasing yourself a Dell PowerEdge to offload all the server work
Thank you again.
Actually, I have two ms-a02 servers in a failover hyper-v cluster (each with 128 GB of memory) where I could easily host the server in a matter of minutes (using NUMA to lock it to dedicated cores). But the goal here is just some casual fun. I don’t have others to play Ark with, and my nephew only plays occasionally.
We played a lot of ASE when he was younger, and I thought I would set up an ASA server for old time's sake. This is more of a once or twice a week thing for only 1–2 hours, so running it on demand is much easier. My gaming pc has 64 GB or ram, and (while a server load doesn’t really benefit from 3D cache) the CPU is more than enough for the job.
Third party anti virus can stop people joining to, my mate had to uninstall his to get on my servers
Highly recommend you double check your router settings for any new AI Protection things, that screwed us and we didn't know it. Oh & somehow my husband's PC was set to private from public. Also try having the person direct connect.
Can't link but if you search blog. Silverpc . Hu that will get you there
the ini options for configurable cryopods arent applying, dont know how to contact the mod author, any advice?
boelle what are the lines u added?
here is my ini [ConfigurableCryopods] PreventCryoSickness=True CanAlwaysCapture=False PlatformSaddleTimer=True MaxBossLimit=20 CryoSpeed=0.2 OwnerCryoOnly=False RestrictedCryoDeploy=False CryoRestrictedItems=True CryoInventoryItems=False BossIgnoreDragWeight=False AllowTribeLogs=False AllowCuddleReroll=False PreventCaveCryo=False EnableCryoRifle=False EnablePassiveProduction=False EnablePoopProduction=False EnableEggProduction=False CryoSicknessCooldown=300
in gameusersettings.ini
let me check mine
cryo rifle and cryo sickness are not disabled
oh this is for the mod
yup thats why i originally posted in mod general aha
oh
sorry shoulda made it a bit clearer
yes, normal
yup
need help.
i play primal fear and if i shoot an alpha dilophosaur with an tranq dart, after a while his torpor drops 0 again..
Is my ini wrong? and what config does this apply
I mean, if you could find someone willing to detatch from the cluster while you upload then sure. Otherwise youre character and tames are stuck there.
I wanna thank those who have responded, I truly appreciate the assistance.
I also wish to state that we have removed the whitelist, double checked my router to ensure there arent any new Ai security protocols, that my server PC is set to public. I will also add that as of now im the only PC player who has attempted to join, the other 3 ( the 1 who can join successfully, and the 2 that cannot) are all on Xbox, so unfortunately directconnect and checking files to ensure the state of them is not an option for them. I will keep these in mind in case we ever run into any issues with other PC players though, the information will certainly come in handy.
I will state that the 2 unlucky console players have done clean re-installs, checked their own nats and ports, and yet still are receiving the "connection timeout" message when attempting to join
Some of my players are telling me theyre able to download creatures from singleplayer/other servers to my server. I thought this was disabled by default and I've never seen this happen with my previous servers so I'm not even sure exactly how to turn it off, any ideas anyone? ;o;
Anyone know - do you loose the fear evolved event skins when you remove the mod from your server at this point? Would like to keep my ghost direwolf and shark skins, etc.
no
Ok, perfect! Thanks for the prompt reply
Has anyone had issues with dino textures not loading? Dodo, Purlovia, Dildo, to name a few
Hey, anyone wanna help anybody wanna help me make my server rates on nitrodo I don’t know what I am
Need Help For Server Config Ini More specifically Crafting cost willing to pay at this point
Just Dm Ill give all the mods and what it is i had in mind
Nitrado server?
Use Beacon Server Manager
Negative, and that 3rd dino must be a mod. 😉
Yeah I’m an idiot with auto correct. I’ve deduced it to a few mods but I don’t know why it’s happening.
Was trying to lighten the mood with a joke about "dildo" lol. Not all mods play well with others.
Guys why couldn’t I create stuff in the game?
What do you mean "create stuff in the game"?
I’ve deduced which mods were causing the issue for me, not sure if it’s an isolated issue or all Xbox users have this issue etc so I’m trying to figure it out. Yeah poor Dilo got his name wronged 😂
Does mod order matter much? I can't seem to find a source that gives any definitive yes or no, or a general guideline for which mods should go where in the order.
Not really except overhaul mods/modded maps, I like to go dino mods, qol mods, building mods then anything after that
Hey guys can we spawn on the Ossidon yet or do we have to wait u till relised tomorrow
Can’t until it’s released tomorrow I believe
Cheers dude
Is valguero having issues with nondedicated settings not sticking?? The ini is an import from the same skeleton that 5 other servers ran just fine for 2 months. But even though everything looks fine- the effect is not there or bugging heavily in the map. Leveling characters or tames, turret damage multipliers, etc
good day to all ... can someone tell me what settings i need to place to make normal beds working in ratholes or very small caves in asa ?
i alrdy tested with disable the whole antimeshstuff and enabled pve cavebuilding with no luck
Heya - I am looking for two settings: Being able to pick up Otters in the beak of the Argentavis, and making Alphas drop loot like Xbows and weapons. Both currently do not work on my unofficial, non-SP dedicated PvE server. Thanks!
Is a RCON command to post into global chat?
How do I upload a save file from filezilla for an old server save? I’m struggling and nitrado stopped helping
hello, wondering please, where can i find cluster files if i'm not using -clusterdiroverride?
ShooterGame\Saved\clusters
the argy is default "enble pve carry" but instead of rightclick you press C to use beak
alphas do drop loot by default aswell but its not a guaranteed drop on every kill i believe
I thought there was something wrong with my "C" button; it turns out the Argent has to be flying to be able to pick up the Otter.,
Türk var mı yardım lazım
is it safe to remove fear ascended or does it still need to be passive?
you can pull it, items should stay just wont spawn anymore 🙂
anyone got constant crashing servers after the cloud fare restart?
Think its something API related?
Probably mod side, think cf uses cloudflare for things
thx
is it possible to override what crafting station an item is made in with the ini files?
i used to use a tool that obfuscated a lot of the optoins for dedicated server hosting and am now switching to a different tool that exposes these settings. is there an easy way i can tell if my previous host converted my save files to the new store format?
If like Nitrado the player save files will not be in the backup you can download
i have all the files, i just need to be able to tell if i should enable -newsaveformat for the command line
If you got the player files then no?
where are the player files normally stored?
With the map file lol
Thats why I say if they dont give them to you when you get them then they be using the usestore save method
Ever since the most recent server update, most/all of the players on my server cannot see their structures and items within structures will be invisible as well (says 35/50, but only shows icons for 10-20) but everything can still be extracted/seen once in a player's inventory.
Anybody else having this issue? I had seen posts that it was due to Der Dino mod, but I updated that mod + removed it entirely from the server as an extra test and the issue still persisted.
Seems like whatever WC tried to fix with that "player replication/spawn login issue" broke something else for replication elsewhere for structures/items.
Do you guys think after the perfomance update a rx 580 8gb will run the game?
ASE yeah, kinda.
ASE nah
What
Hoping that whatever WC did to break structure visibility/replication with that last server update is fixed with this one. Game is unplayable for most of my server's players because they can't see or interact with 99% of their base structures even though the hitbox is still there for them.
Dear god we can only hope.
Very unnerving for entire bases to just poof on you.
Also getting tired of relogging several times a day just to see structures.
I've found that stuff placed for players within their render radius with this issue will be visible, but if they log/crash, when they get back in structures because invisible/inoperable for them again. If stuff is placed when they're not within the radius, it won't be visible.
🍝
I feel asif ive made a grave mistake. shoulve read that there was a patch coming out today before starting a non dedicated server. no one can join my hosted server. the screen for them to spawn shows up then it kicks them from the game... ideas?
its a major patch everyone needs to be on same versions
i havent had this issue at all 👀
The moment they released that last server update it's been plaguing my entire server's population
what mods are you running? It could be a mod wasnt updated with that particular update cause i havent heard of that at all
Everything was fine for months and months prior with all the same mods, so they broke/changed some filepath or something
yea that sounds liek a broken mod
This update breaking servers for others?
yep
It's breaking some mods again
Would assume so, about to start troubleshooting on my test server
would not be a major update if it didnt break things
I only got about 6 mods that share each other. So if it's mod related, I should be able to find it pretty quick
I have a server booting
yeah.....i've....got a few more than that lol
it's likely a mod that has to do with altering/adding/replacing dinos
I know what mods it's NOT
Based on which of my servers have booted and which haven't
certainly one of those, pulled all the creature mods and it started. So now to narrow it down
which ones you got? i know better creatures is one. shiny is working on it rn to get a fix put through curseforge
Might be all overhaul mods
I have servers with dino mods on, and they booted
None of my overhaul servers started
omg
yep, do have that one and shiny. Others are sunken world additions, Draconis Glaucus, Paleo Ark Native Aquatics, Bombadier beetle, Cockatric, Sivatherium, Marni's Griffons, Dracoteuthis, S dino variant, S variants fantastic tames, no untamables, Edmontonia
My servers are up lol
Even with those errors being thrown, looks like just asadm was glitchin
RCON proved serves were up
restarted ASADM they're registering.
I'm self hosted so I'm working on it via remote desktop....can see it doing the reboot loop on crash with the affected mods
Mine were doing the same thing, but I looked over at my rcon server status and they were all up
mine were in reboot loops, with dll errors popping up
but server status was green on all servers
rcon test yours
🤷♂️
just inc ase
check shootergame logs too just to be sure
I'm staring at the server's instancet terminal window so I can see when it changes over to advertising for join
Wouldn't get that far with the mods that were problematic
Man, wish I can help ya figure it out, but all mine just "stopped" throwing out random errors and crashes and are up now.
eh, it's just a matter of running through the list of creature mods to test them
loads fine with everything else
so not that long of a list at least
Anyone hosted through Nitrado? Update has been installing over an hour now.
nope, i don't touch the "n" word with a ten ft pole lol
They have to load it into their own systems for propagation network wide
Hard to say what the issue is. Weird things happening with other hosting methods.
self host nothing really weird happening
Unfortunately I couldn't get my ports right to run on a dedi machine. So I opted into Nitrado until someone nice enough would help me.
I consider asadm "self-hosting" 😄
semantics
Ah, i'm not familiar with that one anyway
As long as you're hosting off your own servers/machines, I'd say that's self hosting.
indeed, 64 core threadripper 256 gb ram. Uaca's ASA server manager for the interface with the most common things. Backups I do with my own scripting over the network to another machine in my rack
maybe just rcon protocol
nitrado obviously having issues, Ark Ascended Dedicated manager, and now Uaca's are all having issues.
It's not uaca's specifically
Maybe, but it was properly working RCON that I even notied my servers were up.
doesn't have anything to do with the manager
least on my end
it strictly related to the affected mods
If you send me your mod list, I can, see if I can boot up a server with em
I'm almost done going through my creature mod tests. I know for sure better creatures and shiny it won't boot with those loaded.
I dunno man. I think chasing mods is a rabbit hole
can be
I just went from wtf to magically booted
Well, I did see a few updates go through
only my event server booted with shiny and better creatures
all main maps crash as soon as they hit the ticking loop
Yea, something else weird here going on.
Going to guess the event map is lightly loaded?