fix-my-printer
NIDEC Fan where do i plug it in?!?!
setup
Octopus V1.1 was not detected
setup
Buzzing when idle and "high" power consumption
other
Help With 4028 Part Fan Code, Please?
setup
Too slow?
motion
pam issues?
other
setup
Hello,
setup
X and Y endstops doesn't react
motion
setup
Issue with Belt
motion
Sparks and No Heat
other
Extracting broken CHF nozzle from Phaetus rapido
other
EVA3.0 Heating Issues
other
setup
I have a v-minion which has printed flawlessly until I started printing ASA - layer shift
motion
my rat-rig stopped working after klipper crashed and I was forced to reinstall everything.
setup
paid online support
other
setup
every time i upgarde my printer breaks
other
Kasa TP-Link
setup
Probe triggered prior to movement error on the v-minion
motion
LDO Orbiter V2 started making a weird noise
other
Filament_Sensor - Endstop
setup
[MCU] Connection only when Octopus powered via USB and no Cables plugged into the Octopus.
other
setup
Linear rails development of damage while in use
motion
LGX LITE Extruder wiring - Motor turns backwards
setup
Racking issue on xy.
motion
setup
X gantry has a "sine"-like resistance variance when moving along Y
motion
setup
Bed not heating anymore.
other
Belts Binding in specific spot
setup
Filament won't go through hotend anymore.
setup
Clogged hotend?
other
Ugly fronts of prints
other
Z Probe always TRIGGERED, even when the probe is disconnected
other
How to connect the wiring of the bed heater and the ssr
other
setup
Mesh heightmap after three hours of adjusting.
setup
MCU 'toolboard' shutdown: Timer too close
setup
Linear Rail damaged?
motion
LGX LITE DOING CLACS
motion
setup
Why the hotend starts to heat up when i start my v core 3.1
other
setup
From BL touch to probe not working ?
other
setup
How to connect the filament sensor?
other
setup
Under-extrusion issue.. ruled out many factors.. maybe dying extruder or goofed Klipper config?
other
Constant filament unloads
other
setup
Move out of range: 18.500 -15.500 5.000 [0.000] Rehoming after tilt adjustment...
setup
X/Y axis not even
other
Y axis moves forwards and back when X moves left to right (Vcore 3.1 500mm)
motion
MCU 'toolboard' shutdown: ADC out of range PT1000
setup
max_extrude_cross_section
other
Klipperscreen help
setup
Z-tilt problem after install beacon
motion
setup
Z Tilt does not level
motion
setup
Include Missing
setup