fix-my-print
Any guesses on WHY this type of cooling issue occurs??
Other
Consistent Z banding pattern on ASA
Solved
Other
Errors
nozzle hitting print
Solved
Other
Extrusion
Bendy corners on the enclosure magnet frames in ABS enclosed
Other
trying to print the fan duct in ASA
Errors
Huge layer shifts twice and last bit disappeared
Errors
Vcore 500 ghosting Y
Errors
VERY first blob of skirt won't stick
Errors
print suddenly looks really bad. where to start? looks like z wobble but almost layershift.
Other
Errors
Corners Warping with ABS
Other
Streaks after first layer
Solved
Extrusion
effect
Solved
Other
Extrusion
pa12 cf15 after filament change mid print bad quality
Other
Z-wobble or something else? Any suggestion will be great
Other
Errors
Extrusion
polygons instead of circles n(mechanical issue)
Extrusion
VFA-ripples - Extruder related?
Extrusion
Fuzzy perimeter on first layer
Solved
Extrusion
Flow? Temp? Speed?
Extrusion
Under extrusion at regular intervals
Extrusion
Layer inconsistency
Solved
Extrusion
ABS Prints Flawless, PETG is a Dumpster Fire
Solved
Extrusion
Blops
Extrusion
Terrible Extrusion Inconsistency On New V-core Build
Solved
Extrusion
Problems with the top of my print.
Errors
Extrusion
Circles not round *solved*
Solved
halfway print quality change
Other
Overhang improvement? V-core 3.1
Other
Firmware retraction always on ?!?
Extrusion
Severe first layer problems
Other
Errors
Looking for printing profiles for PrusaSlicer
Extrusion
First Layer Problems
Extrusion
[Overhang issues(?)] What's causing this? The distance from the nozzle to the bed is spot on.
Errors
Weird Pattern on flat Walls
Other
Errors
Extrusion
First Layer / Mesh Problem
Extrusion
Umbau sensorless auf Endstop probleme
Errors
underextrusion- due to retraction?
Extrusion
Trash First Layers
Extrusion
Extruder Skipping and A Mess on Large Prints
Extrusion
Eclipson airplanes helix printing issues.
Solved
Other
regular protrusions?
Solved
Print failed on last layers
Errors
Extrusion
Bad surface quality with holes
Other
Extrusion
small gaps between layers across print. can sand it but just curious what it could be.
Other
A disasterous bridge...
Extrusion
Large print warping issue
Other
heavy distortion between sliced file and print
Solved
Errors
Pitting after switching to 0.6mm nozzle
Extrusion
Stringing and blobbing with a 0.6 mm nozzle
Other
[Klipper] Enabling Bed Mesh Levelling Squishes Dense Parts
Solved
Other
Wavy patterns in vertical print surface V-Minion. Orcaslicer default profile PLA.
Solved
Extrusion