fix-my-print
Umbau sensorless auf Endstop probleme
Errors
underextrusion- due to retraction?
Extrusion
Trash First Layers
Extrusion
Extruder Skipping and A Mess on Large Prints
Extrusion
Eclipson airplanes helix printing issues.
Solved
Other
regular protrusions?
Solved
Print failed on last layers
Errors
Extrusion
Bad surface quality with holes
Other
Extrusion
small gaps between layers across print. can sand it but just curious what it could be.
Other
A disasterous bridge...
Extrusion
Large print warping issue
Other
heavy distortion between sliced file and print
Solved
Errors
Pitting after switching to 0.6mm nozzle
Extrusion
Stringing and blobbing with a 0.6 mm nozzle
Other
[Klipper] Enabling Bed Mesh Levelling Squishes Dense Parts
Solved
Other
Wavy patterns in vertical print surface V-Minion. Orcaslicer default profile PLA.
Solved
Extrusion
Blobs on edges of top layer infill
Other
corner artifact
Solved
PETG droop on overhang?
Other
Extrusion
Curling issues on my V-Minion
Errors
surface stramgeness
Extrusion
Potential pressure advance issue
Extrusion
Top Infil gap issue
Extrusion
OVERTURE LW-PLA issues after seam.
Extrusion
PETG infill top issues
Other
Layer line all of the sudden?
Extrusion
Banding on print
Errors
Extrusion
First Layer Issue with Beacon
Extrusion
Very bad surface quality (V-Minion, LGX Lite + Rapido 2+)
Extrusion
weird ripples started to appear.
Solved
Other
Extrusion
Lines Across Prints
Other
Why is one side okay and the other not?
Other
Errors
print is getting ruined on second layer by nozzle being to close to the first scraping it ?
Other
Extrusion
Newly built V-Core, ringing like crazy
Extrusion
layer shift
Other
DDEX print issues and tuning log.
Other
Extrusion
Vase mode seam?
Extrusion
First Layer -> Future Layer Issues
Other
Extrusion
Manual Input Shaper Calibration Print Problems
Other
calibration confusion
Errors
Extrusion
Help. Been tuning for months and still struggling.
Other
first layer looks like this even while i the z offset is calibrated
Errors
Printing PA-CF
Other
Extrusion
Weird First Layer Anomaly
Errors
VCORE 500 - Is the mesh taken in account ?
Other
Sparse infill speed modifier not working on certain parts
Other
Support walls with gaps
Extrusion
top surface pattern
Extrusion
1 x 5015 not enough right.
Other
Print bed adhesion because of worn print bed?
Errors
Extrusion