fix-my-print
Ringing on only one side of the print?
Errors
Superslicer general config help...
Other
Ugly ASA print outer layer
Extrusion
Gaps at the seams
Extrusion
Cooling at lower layers reducing hotend temp and triggering fault
Other
Tuning
Errors
Rattling X/Y axis
Other
Z dimension undersized
Other
solid walls coming out looking like a chain link fence.
Extrusion
strange pressure advance behaviour
Extrusion
Support impossible to remove
Other
petg not printing with pla speeds
Other
What would cause this?
Other
[Fixed] V-Minion Z or Y axis issue
Other
PLA bubbles up on bed.
Errors
Extrusion
do i have too much cooling?
Extrusion
Weird layer lines in print - overextrusion?
Extrusion
warped holesextra holes
Other
Overhanging issues
Extrusion
Weird ridges on corners
Other
Extrusion
Pronounced seams
Other
Extrusion
Over extruded overhangs but only in some places
Other
Extrusion
weird surface artifacts
Other
Perfect first layer but rough top layer after infill
Other
Extrusion
First prints... bad quality an gaps in perimeters
Errors
Y-axis dimensions is always smaller than x-axis dimensions
Extrusion
Gaps in my perimeters.
Other
Extrusion
3D Printer Fail-Safes
Other
Bridge not connecting
Other
Perimeterlines not connected
Extrusion
How would you print this to get best results, without using supports?
Other
Extrusion
First layers with artifacts on new V-Core 500
Other
Errors
Extrusion
Print in PETG
Other
The start of print seems to miss the first few millimeters of extrusion
Extrusion
Belt Tension?
Other
Is this a z-offset issue?
Other
What types of surface artifacts are these?
Other
What setting is causing these fat perimeter overhangs?
Other
pressure advance issue ?
Extrusion
taking off the pei sheet
Other
Minor problems with ABS
Other
Gaps in perimeters
Extrusion
Holes Near Seam, Vertical Stripes
Extrusion
RR 3.1 500, First print problems
Other
closing the gaps
Other
Is there such a thing as too high of fan speed for bridging?
Extrusion
Z Wobble or bed PID?
Extrusion
Really bad Quality
Other
Some PETG prints to work on improving
Other
Extrusion
~9.54mm artifact bottom layer
Other