fix-my-print
Random missing or under-extruded layers (clacking noise) as well as inconsistent extrusion issues
Errors
Extrusion
infill sticking up
Extrusion
Move exceeds maximum extrusion
Errors
Top infill not connecting with perimeters
Other
Extrusion
Out of Range Error on Large Print
Errors
Two type of print quality on infill
Other
Extrusion
ABS Layer Adhesion
Other
Bad Surface with holes
Extrusion
Infill not connecting with outer wall
Other
wavy, artifact and layer shift
Other
long gaps before z seam
Extrusion
Seam problems
Extrusion
What is this?
Extrusion
Fan Horns.. really could use some help, please.
Other
seam parameters in prusa slicer
Other
Stringing and "lines"
Other
Perimeters print fine. Infill breaks up.
Extrusion
Reverse Elephant foot..
Errors
V-minion improve overhang with stock cooling
Other
Extrusion
Prusia Slicer 2.6 tree supports digging into model
Other
Calibration print with 0.6mm nozzle
Errors
Same print settings, slightly different model, what's going on?
Extrusion
Periodic horizontal mini patterns
Other
Errors
Pimples at Layer Start/Stop?
Errors
underextrusion upon 1'st print test cube.
Errors
Extrusion
Rough print on RR Rapido horn
Errors
When the filling space is very small, the performance is very poor. How to solve which parameter nee
Other
Buldge on multiple parts on the same print
Extrusion
Strange Stringing on outside of print.
Errors
Extrusion
Uneven first layer
Other
Overextrusion at infill, underextrusion at the perimiter
Extrusion
SuperPinda triggering too late
Errors
Gaps in print after enclosing
Extrusion
softfever slicer artifacts
Other
inconsistent extrusion
Extrusion
many small pimples / zits on surface
Other
Irregular extrusion after changing z-offset
Extrusion
Flipped Y axis
Other
Holes in first layer..
Other
So I did my first ever 3D print
Other
Pot holes on surface
Other
Extrusion
z artifacts advice
Errors
PETG Temp tuning tower
Other
Differences in first layer between prints?
Other
what is this vertical banding
Other
Extrusion
Rough top layer
Extrusion
First few layers are not consistent
Extrusion
Very bad surface
Other
Errors
Extrusion
Weird wobbling?
Errors
Edge Deterioration
Extrusion