fix-my-print
lifting?
Other
Extrusion
Speed related artifact
Other
PETG fast printing
Errors
Cant get a consistent first layer
Other
Z Offset How to get it right?
Errors
Wavy Corners
Other
Weird artefacts on perimeters
Errors
Terrible infill
Extrusion
Rough solid layers after infill
Other
EVA3.0 Shroud FormFutura Apollo X
Other
Extrusion
X-Y Hole compensation / tolerances
Other
Extrusion
When using a prime blob with PETG, the blob sticks to the nozzle.
Other
No bridging possible
Other
Extrusion
was this a partial clog or something else?
Extrusion
Floating Z
Extrusion
PAM still not replacing full 7x7 probe
Errors
bad line on prints
Errors
Extrusion
Underextrusion even with high extrusion multiplier
Extrusion
The finish of my prints is ugly
Other
Trying to print 85A TPU
Extrusion
Issues where filament randomly leaves gaps and even doesn't print some lines
Other
Extrusion
What is this?! Wet filament? Clogged or fried nozzle? Prusa PC-CF which usually works awesome.
Extrusion
First layer issue
Errors
Extrusion
help cleaning up these corners after switching to .6mm nozzles from .4
Extrusion
small gapes into the top layer asa
Extrusion
bump on outer perimeter in a specific part of the model
Extrusion
overextrusion on top layers
Extrusion
Getting these artifacts on my corners.
Extrusion
Rough and overly rounded edges.
Other
Extrusion
Baffled Beginner Has Distorted First Print
Other
ratrig gantry parts in abs+ warp
Other
Artifacts on v-minion in vase mode with 0.6 nozzle
Extrusion
Non consistent infill
Extrusion
infill inconsistent extrusion and rough layers
Errors
Extrusion
Tolerance issues.
Other
overextrusion at beginning of print
Extrusion
x Axis starts wrong point
Errors
Blob on perimeter start after Gap Fill
Extrusion
How do I improve from this test?
Other
Wayes in the print
Extrusion
overextruded solid layers with Extrudr Durapro ABS,
Extrusion
lifting first layer
Extrusion
Underextrusion at layer change when printing at high speeds.
Extrusion
New Printer-Z banding?
Other
ASA bridging.
Errors
Getting rid of an ugly seam
Extrusion
Problems with ABS adhesion to plane
Other
ASA first print
Extrusion
"Heat soaking"?
Other
How to see the XY belt icon, I encountered the situation that the printing is not circl, but I don't
Other
Errors
Extrusion