fix-my-print
Consistent 2mm Z banding. 3.1
Other
ripping/tearing of first few layers in one local spot on large print.
Other
Errors
Extrusion
Issue with overhang first layer and support bridging
Other
Overextrusion after internal top layers
Extrusion
Stringy prints
Other
1st print great, 2nd print cracking/seperation
Other
Strange Artifacts on First layer
Errors
PCTG curved surface
Other
Poor bridging on first solid top layer
Extrusion
fuzzy skin
Extrusion
Gaps at the end of perimeters
Errors
PETG, what to adjust?
Extrusion
Bad Print Settings? - Nope......Nozzle
Extrusion
weird layers
Extrusion
subtle wavyiness surface finish
Other
Errors
Shape of inner Perimeters visible on the outside
Other
Quality Improvements
Extrusion
Toolboard Shutdown
Errors
Why this line?
Extrusion
VFAs and not straight lines
Other
Problem With Temperature
Errors
Extrusion
ASA multi part fails (singles print fine)
Other
How to fix first layer?
Other
Weird plastic blobs showing up everywhere
Errors
Extrusion
Retraction calibration help
Other
Extrusion
Layer skip
Other
still tuning. retraction issue?
Errors
EBB42 - Klipper doesn't use the extruder port
Errors
Extrusion
Silk PLA causes repeating clogging during printing
Extrusion
new filament, gaps in layers
Errors
Extrusion
Filament runout/restarting woes
Other
Errors
Extrusion
ASA Top Layer woes
Extrusion
stringing
Extrusion
Settings change mid brim?
Extrusion
PetG Looks like crap
Other
Extrusion
X axis shift
Other
strange pattern at top of print.
Extrusion
Supports and gaps around holes
Other
under extrusion.
Extrusion
First layer clogging
Extrusion
Single wall issue
Extrusion
Weird patern on the corners
Errors
Files I've designed can't print.
Errors
Default PrusaSlicer RatRig Settings - Voron Cube - Quality Issues
Other
Extrusion
Layer/Wall change hole
Extrusion
~21mm wobble/error in print?
Other
Errors
Extrusion
Gap between seem
Extrusion
Horizontal cracks at one side of the print
Extrusion
Sudden first layer issues
Extrusion
Printed Parts
Other