ratos-support
Feed rate on Z axis from toolhead tab in Mainsail locks up lead screws
Solved
Other
Belt tension - starting point - Vcore 3.0 , with updated toolhead
Motion
Ratos v2.1.0-RC2-55-g157db24e Internal error on command:"PROCESS_GCODE_FILE"
Solved
Errors
Problem M8P voron 2.4
Configuration
How can I limit input shaping to 90Hz
Solved
Customization
I see that BigTree has the new Octopus Max board out . Or maybe its not new and I just noticed it.
Configuration
RatOS expects stowable probe to be deployed before print
Errors
Configuration
Wifi settings won't save?
Configuration
Unable to install...
Solved
Errors
Other
i'm trying to install RatOS v2.1.0.rc2 on Pi 4 B
Solved
Errors
Configuration
DFU not working Octopus 1.1 Pro H723
Solved
Configuration
Z-Endstop on Voron V0.1
Errors
Configuration
Stopped connecting to wifi
Errors
Beacon + RatOS 2.1 / VC3.1 400mm - "Unknown config object 'beacon'"
Errors
VC4 errors with Orbiter O2 toolboard
Solved
Errors
Configuration
Boards
VzBoT AWD + BTT Kraken config problems
Boards
Configuration
Customization
Motion
How to use adaptive mesh with multiple profiles
Solved
Errors
Configuration
Customization
RatOs Printer Integration
Solved
Info
Configuration
Other
Chamber cooling fan setup and gcode integration
Macros
Configuration
Customization
Kraken - RatOS using tmc5160 drivers vs tmc2160?
Configuration
Getting occasional "mcu shutdown - timer too close" shutdowns.
Solved
Errors
Ratos 2.1 + Adaptive mesh + and Orcaslicer
Macros
Configuration
Octopus firmware version mismatch
Solved
Errors
Boards
check_gain_time
Solved
Configuration
RatOS v2.1.0-RC2-12-gfcfd7965 - Question related to Toolboard device path
Configuration
Boards
Internal error on command:"TEST_RESONANCES"
Errors
PWM fan control not working
Solved
Errors
Configuration
Printer won't boot
Errors
unable to apply skew profile
Macros
chamber_filter
Solved
Macros
This E-Stop code I pasted into the printer.cfg file is getting errors when I hit SAVE & RESTART.
Solved
Macros
Strange new behaviour RC2-0-g3a587cf6
Solved
Configuration
Q#2..... RatOS 2.1 v2.1.0-RC2-0-g3a587cf6 configurator and oem img config wifi.
Solved
Configuration
Customization
Boards
Rapido V.2.0 and Orbiter V2.0 not in RatOs printer.cfg
Solved
Configuration
Moving toolhead after priming to the initial print coordinate
Macros
Configuration
Octopus Max EZ detected but is unresponsive
Solved
Configuration
Boards
Unable to parse option 'pid_kd' in section 'heater_bed'
Configuration
BTT HDMI5
Configuration
Boards
Other
Macros
Customization
Step/Dir Drivers
Solved
Configuration
temperature above max or below min shutdown
Solved
Ratos / Raspberrypi
Configuration
Customization
Unknown command:"RESPOND"
Macros
Configuration
Errors
Failed to detect NetworkManager Service
Configuration
No option for VC4 in Installation macros
Solved
Configuration
Other
BTT SFS v2 Motion Doesn't work
Solved
Configuration
Motion
Raspberry PI & BTT 1.1 Installation
Errors
Configuration
Boards
Balena etcher fails on verification
Errors
Rapido UHG clog
Solved
Macros
Printer keeps dropping off the network
Solved
Configuration
Pin 'VF4' is not a valid pin name on mcu 'mcu' & pin PB14 is reserved for spi2
Solved
Errors