#tennogen-showcase-your-content
1 messages · Page 2 of 1
chest armor WIP to match my fire shoulder armor pieces
Looks dope
Let's try to keep this channel to sharing pictures of tennogen, and #tennogen-creation-discussion for talking about them. 🙂 Clearing a few messages for this.
WIP of a syandana. What do you think?
looks dope
should i keep this as a chest armor? or turn it into a syandana and add a cape element to it?
chest armour
it looks strange as a syandana and I can't really see it work with a cape attached
Both!
I don't think DE is cool with that
W design
Chipping away at this a little bit as a warm up
holY sMokEs
Hows the Xaku skin going?
Slowly but surely! Life has been extremely busy so I haven’t had a lot of time lately
I see I see. Take your time mate! If it makes it in tennogen I'd be the first to buy it!
I appreciate the support!
Xaku so far
Ooooo i love it, what does the broken form look like?
Got the Gorgon baked! Just a small side skin I’ve been using as practice
Reminds me of the Orokin
Lunarius Polearm WIP 😃
Please grab the Tennogen role in #757632548842111086 to post in this channel! 
Lunarius PoleArm WIP 
Yes
He was joking 😄
I really like this
Thanks 
Soon
Hey All! I'm fairly new here and doing my First Tenno Gen piece.
I want to make a volt skin so here is some progress in substance and a couple of colour schemes
Still have to do some texturing, but I think i'm done with the Tint maps ^_^
that looks pretty darn good for your first piece
Thanks! It's my first TennoGen but not first time doing 3D in general, although i'm still noob and getting used to the texturing stuff XD @zinc surge helped me understand it a bit better!
As a fellow first time Tennogen challenger, this is so cool that I'm jealous.
I can't wait to see how the body skin turns out!
😮 Show us what you got!
It's above this thread, but this is what I'm talking about.
https://steamcommunity.com/sharedfiles/filedetails/?id=2966510504
Dude that's awesome!
Thank you very much. I will continue to work hard as there still seems to be room for improvement.
It's the never ending cycle 😭
Keep going though! I have to edit because of slow mode XD
https://steamcommunity.com/sharedfiles/filedetails/?id=2972074665 Updated version of Lunarius 😃
Nidus helmet WIP
Excalibur V3.0
silicai feedback wip
This channel is for Tenno-gen, as in, player made skins. Please use #fashion-frame
Incredible! If it gets accepted, I’m certain tons of Tenno are gonna rock it
My first attempt at making tennogen. I def could use some feedback, especially this early on
Made a few changes
Can we get a before and after?
To like the previous version I did or the last submission?
https://steamcommunity.com/sharedfiles/filedetails/?id=2972074665 Updated version of Lunarius Syandana 😃
Previous version pls 
Thank you ^^
And the finished sculpt!
Dual nikana maybe?
glass fists
Why does the short nikana look so strange? Aren't they supposed to look like, well, nikanas?
Sentients don't care about that stuff
But DE does and when a nikana doesn't look enough like a nikana they might not accept it
True, but we'll see. I actually kinda dig how it looks. Looks like a mini war
It’s sentient, things get funky
Exactly
you're still making Nikanas, not dual swords
If it comes down to it, I make new sword, no biggie. But for now, it’s a design I like which fits with the inspirations I’ve had in mind and if I move forward with it, then I move forward with it
I want this skin for fists so I can glass people with my fists
gyre wip
Operator head gear Wip
Reworked the helmet again cuz I wasn’t happy with the last one still
Oh yeah now we're talking
More progress and body edits
There we go!
Feedback wip Katang Shoulder Armor
can we get a full side profile of the shoulder armor please?
Sure
legs wip
Oh yeah that's good
I think it's finish

Operator wip
my ambitious project to make a full Deluxe skin from start to finish
This is a personal project, I have not been commissioned by DE and I'm not affiliated with the company, it's just my take in trying to acomplish such a skin.
Ivara Deluxe - Scylla
Day 7 - started sculpting the back and legs
https://cdn.discordapp.com/attachments/1088511664988635157/1136633511168725002/image.png Update on Styanax. Looking for names.
And WiP helmet
https://steamcommunity.com/sharedfiles/filedetails/?id=2967478363
Finally the update is done ^_^ New paintjob and a lot of detail polishing
how about akontia, it was one of the names the greeks had for the javelins
Rairiki HeadGear wip
WIP for a syandana.
Nekros Anpu skin by me and cleonaturin incoming soon! (A syandana as well - both still WIP but nekros is very close
yeheheh HOOHOOHOO
WIP of the textures
hi guys, I have a somewhat particular request, many syandanas were created by you but being also sci-fi fans I really liked to see a syandana taken from the dremcast in play, in phantasy star online, it's the Varaha which is two closed wings , in warframe there are only open wings, can anyone make them technological closed wings?
is a similar this is an example of those wings
The Citrine Themystos helmet is up on steam! https://steamcommunity.com/sharedfiles/filedetails/?id=3034849608
Excalibur WIP
WIP of a Yareli alt helmet (skin to go with it also in progress)
Critique welcome 🧡
Happy Naberus Tenno
it looks so good!
Experimental Dagath helmet??? 👀👀
Absolutely Dagath
sweeeeeeet lovin’ the claws tearing her face open :)
My God it's amazing. Can you get a hand supporting the chin?
I don’t think so, might be too complex for the poly limit
It's amazing either way. Love the side view too
Another project I've been slowly working away at, Tenno Amalgam Trinity
Final Dagath helmet sculpt!
got a name for it yet? 👀
Not yet no
wait i thought its for garuda, because of the body model and how the fingers looks like garuda's talons 
maybe psychopomp
Model is Garuda cuz Dagath is not released yet. We’re thinking Geatia for the name
Dagath Grabby Helmet
Almost done the Trinity Sculpt
The Trinity Biphasolyst sculpt is done!
https://steamcommunity.com/sharedfiles/filedetails/?id=3057070731
Rau Syandana is live
Wisp Shirogane helmet is done! Just gotta finish the arms and it’s good to go!
WIP for a Citrine helmet (need name suggestion ideas)
Citrine WAOW Helmet
Being in this channel makes me remember how amazing this community is
Hi all! I created skins for Warframe and didn't receive any feedback. I will be very glad to receive feedback. here are my works
Not gonna lie i love this
and here we are with more sentient skins...
They look nice and sentient warframes are ä intriguing concept
if you say so
it makes no sense lore wise. yes even caliban makes no sense
I'm moving this to #tennogen-creation-discussion because it seems there's a conversation forming
there was, in fact, not a concersation forming
reminds me of the scream painting
"The Scream is a composition created by Norwegian artist Edvard Munch in 1893. The Norwegian name of the piece is Skrik (Scream)" soo maybe Skrik Helmet?
Criticism is more than welcome, and I particularly value comments that tell me what sucks, and how much.
this image cant load/broken for me
Really, let's try reuploading it.
crab abs 🤤
Finally finished the low-poly geometry for the Citrine helmet I'm working on, but I'm still really experimenting with the normal baking/texturing - thinking something along these lines might give a light Corpus touch...?
Looks a bit like a plant pokemon which name i forgot
Reminds me of this with that colour scheme
He's welcome at any family BBQ.
"Give all to the Void"
I can see bnp using this
if he still made videos the way he did a couple years ago, he'd definitely use it
the depiction of Grofit, Glory, Gospel
Lunarius v.4 wip
Let's keep memes to a minimum in this channel so that showcases can shine more.
Newest Works in Progress 🧡
Ivara Deluxe - Scylla
I started working on the project again
oooh I am excited for this one

wip wip wip
Not sure if I should continue with this idea or not 
Just recently noticed there's no good Sentient-themed skin for Mag... Let's fix that
(WIP - might make a custom helmet later too)
riyaknu wip
wrong channel
Sorry
wrong channel means you gotta delete that
Again sorry 😞
LadyHawk1
Update on Ivara Deluxe - Scylla (personal project)
head tentacles (similar to Hydroid's kraken/squid) made of energy. they are small and grow when Ivara uses her Artemis Bow
Also, LEG
@marsh sorrel This is what I mean, it's a whole new model 
changing the top a little
Hi, im Noxxr!!
I believe Malaya has already posted Harrow Profitas final model in this channel, so imma post here the concept sheet:
And my current works in progress, Gauss Profitas and Harrow Penitentia Helmet
Noxxr is good people and does good stuff.
You too man 
Beauty designs
Love the Corpus aesthetic
wrong channel.
Something a little different than my usual stuff, the Prometheus whip skin! A fun little model I put together this morning, enjoy!
Todays sculpt was a fun bit of practice!
https://steamcommunity.com/sharedfiles/filedetails/?id=3127751008 finally on the workshop
bro y'all are too good at this. not fair :<
Lol it's really hard as someone just starting out right?
i mean, I can't compare to y'all. Do you guys use Blender? cuz dayum, it looks so good
Some folks use blender, some don't. There are a lot of options. As with anything, you get better with practice. Just start making things, you'll get better too.
what does using blender have to do with the quality of the skin?
I don't think Meuser means that "using blender = good/bad". I think it's just a question as to what we're using
And the Trinity Biphasolyst skin is up! Enjoy! https://steamcommunity.com/sharedfiles/filedetails/?id=3132042550
And the Wisp Shirogane Skin is done! Enjoy! https://steamcommunity.com/sharedfiles/filedetails/?id=3132017151
I feel this set could be an upgrade to the anniversary lotus attachments
This armor set is sick! It'd look awesome on gauss tbh
And the Chroma Imperious Helmet is done! https://steamcommunity.com/sharedfiles/filedetails/?id=3158694217
entrati octavia WIP
NEED this bru
check Malaya on Twitter, that Gauss skin is coming along really well
I’m hype
Liqxal heavy blade WIP
Almost done
https://steamcommunity.com/sharedfiles/filedetails/?id=3170879321&searchtext= Liqxal Heavy blade is up! 
<@&778745217037238293>
The Wudiax machete skin! Highpoly sculpt is finished
Those rings remind me of Tatsu, it's nice
Netrahymn Octavia is done more or less
just finished infested pauldrons sculpt :)
yes
is it a heavy blade skin or just a normal sword
do you see how massive that sword is?
youre right
Removing messages unrelated to Tennogen. Please check channel descriptions and pins.
Hello, my first item is up on the workshop. https://steamcommunity.com/sharedfiles/filedetails/?id=3188668542
Removing messages unrelated to Tennogen. Please check channel descriptions and pins.
read the channel descriptions
the channel name means what it says. "Showcase your work content" (when was this changed?) specifically means you're supposed to show your own stuff and not whatever you found on the internet. Also me and surely others too would appreciate if you didn't post random AI stuff, even in #tennogen-creation-discussion
This server does not allow AI art. Please refrain from posting such in the future.
I checked because it said it was a remix but there was absolutely nothing different
This is for showcasing the designs you are creating for Tennogen. In game tennogen does not belong here.
Any updates on this guy👀
None at the moment
This channel is for showcasing your own tennogen work. If you are looking for stuff for a specific frame you can go to the steam workshop and search there for anything that's been posted or simply scroll up and see.
Questions about tennogen should be posted in #tennogen-creation-discussion
Finished infested hildryn.
Hot
Now I will drink lapsang souchong and then prepare a nice render room for her. And weapons
Talon machete WIP, almost done .
holy moly yes?
hell yeah!
DE, add this!! NOW 👀 🙏
Turn your basic pathetic warframe into the mighty BONEWIDOW in three easy steps!
Now that's 🔥
entrati titania wip
I think it looks great but you need to work on helmet 👀
are you suggesting the unfinished helmet on the unfinished WIP is unfinished? appropiate expression
titania helmet wip
We are almost finished on this collab Abismo V2 Alt helmet for revenant
we need more assault rifle skins squad...
The problem is c were allowed to skin like two- three and can't even change mesh.
Aka designers think it's kinda boring and not profitable
5 but none of them are really worth it except maybe Arca Plasmor
Ooooh
agreed
Lumis Mantis Still heavy wip as some parts are not sculpted, and needs a loooot of polishing....
Finally finish will upload soon 🙂
https://www.artstation.com/artwork/n0nlO9
i made a sub weapon skin )
Made a revolver type skin for Warframe secondary skin.
will be happy to know your opinion and get your support )
Steam Worckshop https://steamcommunity.com/sharedfiles/filedetails/?id=3237636482
Instagram: ilya_nudelman__3d_generalist
that goes against the tennogen guidelines
too modern ?
did you read the guidelines?
yes
you cant change the base mech
ye but some of the skins do change the base mesh ... i was thinking as long as it not destroying the ''collision'' ( like if it was too big for the hand or somthing ) its fine ...
those are not tennogen
they aren't accepting secondary as a weapon skin type either
so he didnt actual read the doc then
says they read the guidelines
look inside
guidelines violation
i red , just miss this part i guess, sorry haha
you can still miss it, as that guide contains a lot of information
reminds me of last word from DS2
Ye the main inspiration was from there
I mean, the silhouette is almost identical to the last word
And the rail notches
Not only that, pretty sure guidelines also says you can't do modern looking stuff, it's a sci-fi game after all
https://www.artstation.com/artwork/OGbYak
okay made another model , hope this one not against any rule 😅
Made a Corpus like stave weapon for warframe.
if you like it please support me on steam workshop : https://steamcommunity.com/sharedfiles/filedetails/?id=3239602758
Nah, it shouldn't, though it doesnt feel very Corpus imo, more like generic sci fi, still cool
Thanks )
In my opinion, you abused a bit with the angles and sharp edges, Corpus does have them, but it also includes other geometric shapes too such as rectangles and cylinders
Would also add more emissives and parallel lines
Yeah, it seems like a sci-fi redesign of the Tipedo
Looks nice but as Noxx said, not Corpus enough. Try studying their design by looking closely in-game
i guess you right , ill count it in my next projects
wip wip wip
If that not entrati enough for Titania then I don't know what is

I assume this is for Qorvex right? looks really nice
Thank you!
I'm unsure if this should go here or #tennogen-creation-discussion but uhh I'm kinda just rough sculpting out a Hildryn alt helm and wondering if I'm maybe going a bit too far into the cat theming?
Hell yeah last time I tried posting a wip sculpt in here Discord kept autoflagging as nsfw I guess it just isn't fleshy enough yet (also based on the time limit I am now assuming this is the wrong channel for this)
Loaded the default colours onto it to try to gauge how well it's balanced (haven't done the metal parts yet so)
Though my Blender is set up for ACES colour space so it looks a little off compared to in game but.
Should probably post in #tennogen-creation-discussion yeah. But it looks pretty cool. You could name it after Freyja
At this point I'm pretty settled into going full cat/kavat with it.. Gonna call that it for today tomorrow I'll probably bump the dyntopo detail to 500-600 as the trim parts are a little too low res and the edges of the base/purple part are rough as they are at 300.. Need to use my tablet to do the detail pass anyways so it's a good stopping point.
mmmm
coins 🪙
https://steamcommunity.com/sharedfiles/filedetails/?id=3245382895
Finally polished and ready ^^
Infested Lavos is almost done :>
ooooooooooooooooooooooooo
this is actually a dope looking lavos !
"day 2" I suppose, probably going to redo the metallic parts to be a bit more hard surface but I'm trying to match the usual aesthetic and a lot of even those hard surface parts appear to be sculpted. Refined the sculpts for the primary and secondary sections, the pipes will probably need a bump in resolution as they are only roughly 700 tris and it shows lol.
Roughing out a sculpt of an idea I sketched out back when Xaku was the new frame.. The skull holes will be filled with tendrils in the end but I'm thinking of just removing them being a complete tunnel cause it looks a little goofy.
But yeah Zaku Xaku because why not
Despite the shaping of the mask it's actually pretty in line with the default mask so hopefully the animations don't get too messed up
Making this one continuous tendril was a mistake but after chopping the UVs up a bit it looks fine textured so
@radiant trellis doing the lords work
we need a tenno op suit
?
This is for tennogen showcasing, not discussion.
WIP on a Yareli helmet 🙂
awww
Yareli Axolotl helmet 😊
Yareli Axolotl is a really good idea tbh
Keep cooking
what a cute idea
Yareli needs more love, skins, helmets, etc.
Indeed
Redoing my Ivara skin. On skibidi, will try to get her into the game now.
And I guess a zoomie into the helmet is due too
she looks so cool!
Another masterpiece. Infested tennogen>
this is indeed infested tennogen, you are correct
angler fish?
Something like that. It was very toothy in V1, but had to be redone due to breaking like 17 rules at the same time.
This was V1
That looks sick. Literally
So Guys its finally official
Working on a new tonfa skin, Ampbatahn. (Shown with @fleet surge and I's upcoming grineer excalibur.)
Ampbatahn is now on the steam workshop https://steamcommunity.com/sharedfiles/filedetails/?id=3259730645&searchtext=
Mantara syandana wip.
I don’t think I ever put Saryn here despite her being up a bit now…. woops! https://steamcommunity.com/sharedfiles/filedetails/?id=3251868688
Also, Dante helmet WIP - still working things out on the high poly thus the 2 variants, but also included video of the FX - idea is that his head is a wizard’s hand holding a crystal ball (but also Sauron-like crown).
Oooo
Does the game use some of these?
wym?
Like do the developers add some of these into the game
Yes @boreal sun they do
Ty
almost ready :)
On “evil”?
https://steamcommunity.com/sharedfiles/filedetails/?id=3276431099 Lavos Crotalo is now on the workshop :)
Please check it out!
Always love to see Lavos tennogen, god I hope this makes it in for my boy! It looks so good!
thank you! ^^
lil Hunhow chest piece
minor feedback changes for octavia
Entrati Dante hopefully dropping this week
Netrafae Titania - workshop link coming soon
https://steamcommunity.com/sharedfiles/filedetails/?id=3292219575 my first ever Tennogen submission
turns out the submission was hidden until something or other got processed, but its fully visible now!
sketch
there it is XD
entrati shutters
I thought they were named Netragard?
Cobalt asked us to change the name, they'd like to use the prefix "netra-" for their entrati skin series
🤔 although netra is just decay in voidtongue
I sure did, it was a heat of the moment thing but it has passed
Netragard is a better name
Deciding on a name is tough
but finding names for stuff also one of the most fun parts
For sure. Really spent a few days looking up obscure words for mine
I usually do a Sanskrit translator and throw in key words about a piece
It’ll pop out very Warframe-y words that you can mess around with
shuttershades wip
🕶️
https://steamcommunity.com/sharedfiles/filedetails/?id=3298278170 workshop page is up finally
https://steamcommunity.com/sharedfiles/filedetails/?id=3300290317 Newer version of the On-Lyne superfan glasses.
ok ths is cool
I would buy this
If this doesnt end in the game im done
gyre wip
i love earpiece and mask
not TennoGen related
srry, just found the channel for it 
wait the skin is confirmed??
No not yet, just the skin wasn't on the workshop at time of posting
so no grineer excal?
is excal mithra still a thing? https://steamcommunity.com/sharedfiles/filedetails/?id=2592704758
this lowkey has the best helmet
true
i think this needs a comeback
Unfortunately it's not up to our decisions. Regardless if it gets popular or wanted it's D.E.s choice
Then why do we vote
I believe the process is a split between what's popular, and what's seen as fitting for the art direction/what the devs like. If something is really popular or they really like it, but it's not quite right, DE often reaches out to tennogen creators to work with them and bring it up to spec
I hope this gets another chance
the voting is just part of the workshop system, has nothing to do with DE
oh lol
not just often, if you upload something to the workshop you will get feedback but sometimes the feedback is just "sorry that's not what we're currently looking for". The only real criterias are: is the technical quality good enough? Does it fit Warframe's art style? Is it something DE wants in the game? If these three questions are answered with yes you might still have to do some minor adjustments but your skin is basically fully set to be accepted.
Also let's move this to #tennogen-creation-discussion because this channel is only meant to showcase projects and not to have conversations
Voting and excitement around an is certainly a way to make sure it gets on the team's radar. So it is helpful, however, it is not a final deciding factor.
An item may look excellent on the Steam Workshop screenshots and earn itself a ton of votes, but there might be something technically wrong in the files that stops us from accepting it. Or an issue that would only come across while playing. For example, a shoulder armor piece that looks great but in game it totally obscure's the player's vision.
It's worth mentioning every item does get reviewed, whether or not it has upvotes / popularity. 🙂
Ah i see, thank you for clearing up the fog <3 , does that mean that certain skins such as Excalibur Mithra might not make the cut in the end?
Answering in #tennogen-creation-discussion !
So, I had some ideas for some kind of Orikin knight armor/syandana. I would start work on them, but I lack the ability as my computer can't handle the software yet. Here's the concept though. It's supposed to be sleek while using swooping, almost organic designs on the armor, topped with a castel-like metalic trim. What do y'all think? (This is my first concept and I'll revise it later, hopefully when I have the means to actually make it)
Its lit
As tennogen idk if it'll work. try it and find out I guess 
https://steamcommunity.com/sharedfiles/filedetails/?id=3307848165&searchtext= Lotus Thorn Lance, now on the workshop!
like it like it 
Little WIP preview of a new gineer operator set.
I would buy the rebreather in a heart beat
Little work on my sentient chroma helmet concept!
I would totally buy this for my operator
I think I have this finalized? I just want a basic layout for it. I have the helmet unwrapped, too.
Looking good 🤩
Corpus Octavia 
air. horn. maximum efficiency.
This is my first stab at trying to make a tennogen cosmetic!
I'm currently trying to make a cloth-looking chestplate that's based on the Ostron's aesthetic.
This is still very much a WIP, but I was wondering if there's any feedback anyone might have on it so far?
I'm a bit worried that the design might be too simple, so I was thinking of maybe making a second bit of cloth underneath the first that has physics applied to it
It's a start, but it does need a little more "oomph" to it to give that Cetus flair.
try thinner... and a little ragged. consider what they're going to be made of. and consider: are they more cloth, or more leather, or tower meat?
if i work on this any more i'm going to go insane, so now i gotta...find someone to collab with? orz
I originally wanted to assign the arm and leg speakers different voices, but they all share the same UV so that was a no-go. I ended up with:
main "eye" + chest are soprano
top "eye" + arms + legs are bass
some small bits on her hip loops + knees + headphone sides are tenor
and one on the back for altos (sorry to my alto homies)
i've spent way too long thinking about this lmfao
Having that as a 3D proof of concept might be enticing for potential collaborators, cause they can get a better idea of how something would look in a 3D space
Especially with regards to the helmet
yeah! that's what i was hoping .........just don't look at the UVs for the helmet.
You got a good idea for the body
Tints clean up left 🌙
I see what you are going with, maybe a smaller helmet hat thingy?
what part of it?
The big straw hat part, top part
https://steamcommunity.com/sharedfiles/filedetails/?id=2972074665 Updated Version is up 😊
current 1999 projects (first one was already done but im doing back and redoing a lot of it)
https://steamcommunity.com/sharedfiles/filedetails/?id=3315590076&searchtext= Millennium Visor by @quasi lark and myself.
oooo that's sick
Does the text translate to anything specific? 👀
on the side of the glasses -- I am HOPING that, that says "tenno" -- but on the lenses haha -- NO.. If it does it was pure accident
Oh yea I was just looking at the cipher, that's the standard way to write Tenno yee
And I seeee, yea it makes sense for the lenses to be just like, code strings.
Ok gonna repost this just one time guys (sorry) -- but it's working properly now -- don't really know what that was about!
but -- WIll remove above post --
This with the talented @bold locust ! https://steamcommunity.com/sharedfiles/filedetails/?id=3317510404
Made a new skin for hammers, based off Kanabo, Tetsubo and the Goedendag. I hope you all like it!! https://steamcommunity.com/sharedfiles/filedetails/?id=3318237159&searchtext=
EDIT: NOW EXTENDED SHAPE
And the Mag Korai helmet collab with RoyalPrat is done! Enjoy!! https://steamcommunity.com/sharedfiles/filedetails/?id=3319756421
Looks like aoi
waterbender Aoi :0
"takes inspiration from the upcoming 1999 update" yeah I think that's exactly the point
A concept for a tennogen skin I'm calling "Shield of the Council" (in reference to the Orikin Council of Executors). Complete with armor, syandana, and a sword+board skin. (Sorry for the low quality, currently in college and am without time and art supplies)
so Rhino Blade of the Lotus... again? I didn't see your message in #tennogen-creation-discussion, BotL was indeed the basis for this.
'Twas an inspiration, but my vision for a knightly Rhino is different, complete with a flowing crest of flames, true segmented armor, and glowing eye slits
I want this so, so bad
excited giggles
Man it was so much fun to watch this piece take shape in 3d ^^
Meet, Imperialis Eques, Entrati Guardian
It's a revision on the rhino skin I posted yesterday, but following Entrati style marks, and a design better fitting a frame than a man
I'm not the best artist, but the 'visor' is supposed to be angled outward, like the front of a ship
Thus giving him a bit of a horn
it's a pretty small drawing, I suggest doing some closeup sketches of specific elements that need further clarification like how you imagine the visor or how you wanna space the obol-chainmail armour
Are you going to collab with someone in order to make the skin rendering?
I don't know yet
Helmet is a bit too Octavia like as some feedback
I'll develop the helmet further, I thought so too. The crest and faceplate will retain general shape, but some fine tuning is needed.
what, no it's not
Heavy WIP. Working on a proxy rhino.
Ooh. Nice
oh you already added the ridge here
1999 Handycam Wip 😀
my stuff being in this channel still feels surreal, ngl x)
huge thank you again to Cobalt for humouring my design <3
Vision WIP
😎
how cute, you included the little save icon
the Drip-Level will definitly be Over 9000 with this one
fr
i live in a world where the word floppy disk has been replaced with the "save icon". 
Welcome back to 1999, where hard drives are back to their original state, floppy disks. Basically, for anyone who doesn't know, floppy disks are save devices made of thin magnetic material, thin enough that they were, well, floppy
i actually have some floppy discs at home
I mentioned making armor to go with my Entrati style Rhino skin (Eques Imperialis) in #tennogen-creation-discussion , so here's a quick concept sketch. It's poorly drawn, but the shoulders are supposed to be around the size of Arca, and the chest plate should be around the size of the kuva chest plates, specifically the ones from the 800 plat bundle.
Excal included as a base for fit
Kullervo Cidaris WIP
https://steamcommunity.com/sharedfiles/filedetails/?id=3325883968 Vision Recorder 1999 finally up 😊
1999 Headset still wip
WIP of some collaborations with the ever talented @studiocyen for the 1999 contest! Enjoy!
High-poly sculpt finished :>
Boa torde
Toku Sentai!
What program do you use for the 3d models?
it's mostly blender anf zbrush
zbrush for sculpting, blender for retopo and renders, substance painter 3d for textures
With @gusty cave ! https://steamcommunity.com/sharedfiles/filedetails/?id=3337446552 🙂
WIP/draft of a helmet sculpt I'm working on for Valkyr. I've never really done any video game graphic work before, so this has been a real crash course in sculpting/high vs low poly/mapping/textures/retopology in general. It's been fun, but I've learned a lot along the way and will likely rebuild this from the ground up when I'm comfortable enough.
rough sketch of a chest armor concept based on the aesthetic of the Scaldra enemy faction from 1999. Might try sculpting this out this week.
scaldra is not on the list in the tennogen guidelines, read all of the rules
Whoops! You are correct. I misremembered a post I read a while back. Thanks for the reminder.
I'll just put that design in my back pocket for another day 🙂
It could be fun to mess with just for practice, and they did say they might consider adding 1999 as a potential tennogen style after the update is out
but yeah as of right now they wouldn't take it
Disregarding the fact that Scaldra isn't available as a theme I think this design is too basic for Scaldra. Nothing except for the colours tell me that this is supposed to be based on the 1999 enemy faction. @fleet surge made concept art for a Scaldra themed Warframe that I gets the Scaldra aesthetic right really well. (I'd post it but I don't if I have permission)
you can post it if you like
Haven't had much time to work on it this week, but should make some more good progress
@balmy grail
super ultra mega begging this gets in
https://steamcommunity.com/sharedfiles/filedetails/?id=3345810139 Kullervo Cidaris is now live, please go check it out :>
updated version of chest and legs armor 🙂
Absolutely beautiful
A little bit of sketching, to get the ideas to start rolling, trying to give the tennogen proccess a go
, i believe i still need to work of my warframication of details, before I dabble with the sculpting and modeling. constructive criticism, suggestions, and any thing you think I should know, or something that is generally good to know, before I fall too deep into this rabbit hole, would be greatly appreciated
- just shoot me a DM ( I have checked out the tennogen guide)
That looks pretty good if this is your first tennogen sketch. Already better than my first attempt. Love the big earrings, focal points like these are always really good design-wise. Good flow aswell and rule of thirds. I feel like you're one of the few that actually read the guide thoroughly. Go with the horns, you wanna avoid a "sphere" shape for the head as much as possible when doing tennogen unless you're really confident in the design. Just keep working on it.
I will keep that in mind, Thank you!
thoughts?
I will main Trinity if this is added
Very clean!! But I kinda liked the first helmet better for her. felt like more 'Trinity' to me XD
It kinda reminds me of the Blade of the Lotus skin that BeastBuster designed for her in some spots. Not quite, but it has a very similar vibe.
That said, love the helm a whole lot, it's really easy on the eyes.
Now that you mention it i do see what you mean, that wasnt my intention! i will see what i can do about it 😁
And thank you for the feedback you guys 🤍
I’m being serious when I say I’d play Trinity if this were to happen
lol, you'd have to wait a while, for me to even submit it, bc I need to learn either zbrush or blender first 😭 (or if you guys have other suggestions for software) that said theres no guarantee itll be added, but I appreciate the encouragement 
It's a really solid design you have there, just a couple of tweaks and I think you'll be on the right track! <3
It reminds a lot of this, especially the first drawing
Shoulder armor Wip 🙂
First time doing tennogen, please give brutally honest feedback so I can improve
hmm, did you look at Destiny cosmetics while working on this by chance?
No, I had a friend do the initial rough sketch. Tried to do an entrati style but might need to weather the gold more . THough I can see also where the extruded center bits may need some changes
Does it look like a destiny cosmetic?
it does in a way
I took a fair bit of the texture from Albrect’s coat for the back. Where can I improve to give it a more warframe feel?
I'd say more but it's 2am and I'm alrealy laying in bed trying to sleep so I'll see if I can say more tomorrow
I think the issue is that the textures and shape don't match. Entrati is very gothic while your design is like brutalism + art deco.
Thank you! I appreciate your taking the time to give me feedback! I will revisit the initial design to see if I can lean more into that
Personally it gave me Baro Ki'Teer vibes
The cheveron shape! I knew I had seen that style somewhere
I can see where it leans into that a bit more! I think I could maybe lean into that even more on the next pass
A couple of observations for now:
- The obols are round but the rest is angular. If you look at other Entrati designs, you'll see that a lot it also has rounder, more organic-looking designs (with some of it literally being organic, but skulls aren't allowed in TennoGen). Right now the silhouette alone doesn't give me much Entrati vibes.
- You're missing the flowy white paint. Overall the design could use some more detail and patterns to better match the intended aesthetic.
Hopefully this is good advice...
My ash would wear these forever
nova wip
I made 2 rough sketches that I wanna turn to a Corpus theme syandana. The first one is a vintage radio turn into a metallic power source backpack and the second is like a prison cage that stores energy. Which do you guys think is cooler?
WIP for the Corpus Vintage Radio Backpack Energy, Can I ask for thoughts and criticism?
It's pretty simple right now and there's nothing to criticize yet. I'd move the cylinders a bit up, and shrunk it down a bit overall.
Like this for the cylinder?
Yeah kinda. I meant overall model but smaller pillars are more balanced
Ok, do we have to merge them together after the modelling is done?
Well, you're expected to produce a game-ready asset, so it can comprise of multiple parts - but it needs to be optimized, fully finished and look coherent
How is that 12k tri
my assumption is that they are modeling hi-poly off the bat instead of smoothing the normals
I mean you COULD just go hi-poly with sculpting at the start and retopo later riighhtt?
correct.
though your question made it sound like 12k was too high. so I'm not entirely sure what you were getting at lol
There's an excalibur in the model
The tris is around 5.600 if you look at the one without the Excalibur
Without the Excalibur
I'm done with the blocking
Damn I'm stupid
Still learning to use Blender. I'm not used to the modifier and their pipeline
I haven't added the triangles
There's a triangulate mod (bring this to #tennogen-creation-discussion )
nova wip
Man I'd love to see a mag skin with this aesthetic. Beautiful skin btw
Good to finally see some Entrati style
we've seen plenty of it
Now if only they would add a couple things into the game. >XV
I made a few sketches for daggers skins , can you please help me decide which one is better to make first ? (also if you have advice or suggestions I'm open for talk
)
I love to see the V5 or V6, we haven't have a Grineer chemical dagger before. I'm leaning to V6
Ooooo- Yea I agree, I really like those, maybe a hybrid of elements of V5 and V6? I really like the blade of 5, and the handle/some other elements of 6.
Also, working with Grineer aesthetics may be a little more intuitive to model, + it really stands out
Especially since Grineer is based on military theme equipment
Almost finished the X-calibur btw
Just gotta finish my least favorite part. The lower legs. Jesus I hate sculpting muscles there.
Collab with Malaya! https://steamcommunity.com/sharedfiles/filedetails/?id=3372652187
I love that. Looks absolutely amazing.
Could you guys make a unique skin for frost? 🥺
here is the first dagger out of the 3 winners (what do you think ( changed a bit the colors to add more contrast )
the second dagger is ready )
https://steamcommunity.com/sharedfiles/filedetails/?id=3388828030
too bad scaldra and techrot arent allowed yet.
Really? I was sure on mealy you can go wild just not orokin style
You can check the TennoGen guide to see accepted faction aesthetics
Scaldra and Techrot aesthetics aren't accepted, but Grineer and Infested are, and I'd say those are very similar
you can probably bend these faction styles a bit to get close to Scaldra and Techrot without being exactly that
Yeah for example, Grineer can merge with Infested, and that is how something like the Charger (more infused flesh into armor) or the Undying Flyer (styled off of Mutalist more closely)
That’s sick
I see , thank you very match , ill fix it soon )
working on old entrati sword, making it less not like the ingame one
Ooo looks like it could be a skin for a machete
thats so 🔥
100% Agreed! I think this would be better on Machetes
Appreciated
Yeah but who uses machetes 😭
it would probably get better traction sales wise and usage on a more popular weapon like big nikana
Entrati nikana would make me drool
I do, zaw machetes have one really nice stance with wide swings
Nami Solo gets some usage too
Frost needs some love, maybe someone can bless the man with a fresh fit 
he has lots of tennogen
Maybe he could benefit from one more
as a frost main, no he wont
So many frames deserve more
this is starting to feel like this convo should be in #tennogen-creation-discussion
Is anyone working on a skin for Kullervo?
questions like this are better asked in #tennogen-creation-discussion where the chat timer isn't a minute long
Vauban helmet
That helmet looks familiar.......hmmmm
it's like, kinda silly but really really good. I genuinely hope its accepted
Idk why it wouldn't it's relevant and looks so good
I'm not sure relevancy matters
not relevancy, just the fact there's still a lot of really good Tennogen DE hasn't accepted for forever now
Yeah alot of tennogen needs to get in
Just know that the process for TennoGen from submission to acceptance and then to implementation is reeeeally long and slow
Machete Wip
I really love the look of this one, I can’t tell if it’s designed as a single or 2 handed nikana?
Its a one hand nikana , but im thinking making dual version of it )
Ouuu that’s awesome, you could make a sword and shield variant like a wakazashi and buckler called lotus and leaf have the buckler shaped either like a lotus leaf like this
Nice idea actually , ill consider it ) thank you 😊
you know that regular Nikanas come with a sheath? It seems like you didn't make one.
sword and shield arent allowed for tennogen
Why not?
ask DE
they just aren't. That's like asking why we can't use telepathy irl. The answer is we just can't.
I can use telepathy irl. I also can fly
same.
...atlas?
Playing around with some ideas
u showed two balls and now u show this lol
Going with this version
okay after a long day of Tenno Gening for the first time in a Blender I have created an early rough concept for a cat-eared Sentient skin for Yareli. (will add more detail to helmet)
Open Crtitizim on the the design or concepts is requested
get back to yah when I wake up tomarrow
https://steamcommunity.com/sharedfiles/filedetails/?id=3423563643
Infested Jade is ready :>
obsessed
Entrati hammer skin
https://steamcommunity.com/sharedfiles/filedetails/?id=3423831011
holly canoni
...c...cat armor???
no questions. lol
Oh man I just realized
I thought it was Infested😭
Gnarly
I did too until I saw the first message 😂😭😭
Wha
big WIP, working on a proxy rhino
Hands and feet, as well as polishing still needs doing. Oh and a head of course.
Oh and one more in blue.
What's that helmet for?
Atlas
?
Its a dagger )
No, someone posted something that was removed. Don't remember what it was tho
dagath wip
Sculp almost done Machete wip
So can someone explain to me how some tennogen stuff aren't on certain consoles?
(Not so fun fact: There are NO tennogen skins for Nezha on the Nintendo Switch)
Revisiting an old personal sculpt, making it submission ready
Repala who?
Holy hell this is by far the best syandana I have ever seen and I sooo wanted it in game.
DE don't own all the rights on Old Tennogen.
It's kinda recent that now Tennogen creators must accept that their work's gonna show up on consols. (I Think ?)
Don't forget that y'all are buyin' those with plat and not real money.
I'm well aware, I buy tennogen more often than deluxe. I just fear that Android Warframe will use money and not plat for tennogen
Just for the record, these topics are best dicussed in #tennogen-creation-discussion even if just for the fact that this channel has a 1 minute chat timer and the other channel doesn't.
more dagath wip
Rhino Proxy uploaded! https://steamcommunity.com/sharedfiles/filedetails/?id=3432398583
I remade the Signalis syandana from scratch in Substance 3D Modeler. It's still WIP because the energy I might wanna do it either in Substance Painter or Blender.
oh man I do love the direction you're taking this from the first take~!
Thanks, I got a couple of feedback that the first design needs more stuff in it and I should sculpt the blocking first of the hard surface because I'll have more freedom in shaping the model than going straight to normal modelling.
They took his frigging eyes
Shocking right?
Styanax Korinthos Helmet up. https://steamcommunity.com/sharedfiles/filedetails/?id=3435361245
That…is absolutely awesome
Regina polearm wip
Almost done the sculpt!
Little sketch
This NEEDS to be added!
Revival
Skull
cool af
Test bake on this bad boi
new skin WIP ft. @quasi lark
That....looks amazing! And it's infested too, which me like very much
almost done
Peak
https://steamcommunity.com/sharedfiles/filedetails/?id=3448073594&searchtext= Regina Polearm is up!
😀
Bro I need this
I need this
progress on the skin
Can’t wait to get like u big bro
🙏 i need this
excuse the necro reply but oh my LORD, i never knew i wanted giant horns for my titan than ever before
Some helmet adjustments
base body for trinity done :>
Dagath night rider skin progress.
Alright, he's released https://steamcommunity.com/sharedfiles/filedetails/?id=3455094144
If it's showing your error on thumbnail, steam needs a little bit of time to update it
Maybe an Ostron Gara? 🤔
yeeesss there's barely any ostron stuff i've been wanting to design an ostron koumei but i gotta get better at blender first
Let him cook
sculpt is done :>
Another rework of my dagger Necron
https://steamcommunity.com/sharedfiles/filedetails/?id=3418602431
I would like this
Rework , now of the one handed Nikana
https://steamcommunity.com/sharedfiles/filedetails/?id=3418657741
where is the sheath?
... i knew i forgot something (tbh i wasnt sure if its required as in case of other blades if dont need the Sheath, and i didnt find information about it on the guide website)
tbf every skin for regular Nikanas, be it TennoGen or Deluxe or whatever, always had a sheath
Still need this one
Armor rework
https://steamcommunity.com/sharedfiles/filedetails/?id=3462671560 Infested trinity skin ft. Therion is now up :>
Okay, updated the Nikana , now with sheath)
https://steamcommunity.com/sharedfiles/filedetails/?id=3418657741
infested armor wip
yes we need more infested armor pieces! bring it on!
A wip for a collab with Edwiwi
Redoding this since feedback said it was too close to a current item in game
oh i totally forgot to post that here too, lua and i did a collab for a vauban helmet
Osteotum 2H Nikana Skin
https://steamcommunity.com/sharedfiles/filedetails/?id=3480740445
Awesome job!
Thats good fabric texture! Did you make it yourself?!
The base is no, and i just modified it
Ah I see. I need to find some good ones to use and that one really striked me with how aged and rigid it looks. Regardless Im a big fan of twin capes so keep it up☝️
what frame is the base for that? also it looks sick so far
Koumei?
correct
ahhh nice
Raevuz syandana is up on Steam workshop 😀
https://steamcommunity.com/sharedfiles/filedetails/?id=3492118279&searchtext=
Rhodora Chest and Shoulder Armor as well 
https://steamcommunity.com/sharedfiles/filedetails/?id=3492123298
https://steamcommunity.com/sharedfiles/filedetails/?id=3492124961
I think this belongs in #fashion-frame
work in progress :>
Dante mummy?
NO mummy!
mummy?
NO mummy!
Mmmmm Dante TennoGen
https://steamcommunity.com/sharedfiles/filedetails/?id=3497629361
first tennogen nothing too flashy
I need this 
obol cape wip
https://steamcommunity.com/sharedfiles/filedetails/?id=3521827807
I finally made a Tennogen submission! I'm so happy I did, it was a lot of fun to work on!
Please check channel titles, descriptions and pins. This doesn't belong here.
Started working on this
Horns for days
wukong prime
no that's Oraxia 👍
It's actually Excalibur
Speaking of...
Excalibur is up and ready, awaiting approval.
I might start playing again if it gets approved
Haemadys operator/drifter face set
https://steamcommunity.com/sharedfiles/filedetails/?id=3531424388
https://steamcommunity.com/sharedfiles/filedetails/?id=3531427386
this looks delightfully off-putting lol
Facehugger mask 10/10
the mask part making me sad we don't have a pirate outfit to go davy johns
Ngl i would buy the cape
I still improving the details and the FX aswell and Thank you hoping this will gets in 😀
hey all just getting started on my first attempte at something Tenno Gen im self taught in modelling so im unsure on if im doing things to the correct standard would love some tips and advice if any can be given heres an image of an alt helm i started making, its supposed to be Murmur themed
WiP
entrati frost wip, with quick sketch idea for the helmet
my alt helmet for baruuk done metallic, emmisive and normals whats everyone think so far in desperate need of some constuctive critique
That is actually really good model and I have to say
If you need the rules the warframe forums has all the themes you can do listed. I didn’t see murmur, scaldra, duviri, or techrot on there but this can easily be a repurposed helm for something else. Also #tennogen-creation-discussion is probably the better place for future questions
Are 2D drawing submissions allowed? Or is it required to be a 3D model?
submission has to be 3d but you can try to find someone to collaborate with if u're only able to draw the design. if u have more questions it would be better to ask in https://discordapp.com/channels/552966801558863896/915375778751995934
My atempt at an alt infested theme helm for voruna (havent decided if i should do a full skin yet) and want to see if this is a helm anyone would want. Still very newbish to 3D modeling and doing this as a way to expand my portfolio, have fun, and get some practice in :3. (obvious very high quality version still working on texture before retop)
netrashiver frost sculpts
Hi everyone, just want to share the mace that I'm working on right now, work in progress
Hi ! here is my first Tennogen, i had a lot of fun doing it https://steamcommunity.com/sharedfiles/filedetails/?id=3552193209&searchtext=
https://steamcommunity.com/sharedfiles/filedetails/?id=3553620457
Netrashiver Frost is now up on the workshop
WIP going for a fox like look
https://steamcommunity.com/sharedfiles/filedetails/?id=3556383983&searchtext=
Izpada Machete is up!
<@&778745217037238293> bot
https://steamcommunity.com/sharedfiles/filedetails/?id=3557389243&searchtext= just got done with this one
hot diggidy. hell of a skin combo
More progress on my Frost Arctyclyst skin!
revisiting that obol cape of mine
