#site-support
1 messages Β· Page 205 of 1
Whats your THM username?
Its hijack33
Cool, please try again (leaving and rejoining that is).
Okay, I was logged out and locked out, will try once the five minutes is up
Okay I had to recreate my account and it works now, thank you!
Has anyone else encountered an issue where questions answered are not counting towards your streak? If so, how do I fix it. None of the questions I've answered today are counting for some reason.
@marble patrol Are you expecting your streak to increase by one for everyone question you answer?
It's not a matter of how many questions you answer, it's how many days you answer at least one question on.
No. I mean I had a 7 day streak going. Today would be day 8, but the questions I am answering today are not registering towards my streak for whatever reason.
I've answered around 10 questions today.
I think this is a good channel to ask, so I am one of those plebs that uses the same password for everything. Currently, my password is a noun with a capital letter, 3 numbers, and an exclamation point. I've been using this password for a few years and have never encountered any problems with people getting into my accounts. I use 1password for the auto logging in stuff because I'm lazy, but I'm debating on actually utilizing it and using randomly generated passwords. Should I really be concerned about this? Those websites that tell you how long it'd take to brute force your password say it'd take like a million years to do it, but idk what do you think?
if one account is compromised ur email/username and password combo is easily checked against other sites you might have an account on
@fierce ore It would just take one data breach from a service storing their passwords in (god forbid) plaintext to allow someone to have access to all your accounts.
compartmentalisation and reducing possible effects of a breach is more important, as u said its unlikely to be brute-forced, but sites are likely to be subject to leaks or breaches
yeah, i never use it for sketchy websites, only the big sites. but i will admit it's on a lot of websites
its not good practice but its up to you to determine appropriate opsec for you
kinda basic security though
yeah ur probably right
i dont work in security but i do work in the financial world so i figured i'd ask the experts π
I just don't want over complicate things if I don't need to
by having to click on the app or whatever to get the password instead of just typing it in
with autofill its not too bad, and its probably worth it given you just described ur one password in a server about security
lolol
but yeah, so sounds like it's the way to go even if it's not as convenient. but now that i think about it, dealing with the credit card companies and bank because someone maxed out my cards and stole all my money is pretty inconvenient
This channel is for THM specific tech support.
Evening from East Coast US, was hoping to get some tech help with the Pickle Rick room.
When I fuzz against the site it stop responding, almost like DDoS protection as it will respond a few moments later.
I've experienced this dirbuster, nikto, and burp.
Zap worked when trying passwords, but hosed up on brute forcing directories.
I'm connecting via VPN in a VM from VirtualBox running Parrot OS.
Just terminated the Pickle Rick machine, rebooted my VM and am trying again, but wanted to ask while I did to see if there may be any insight.
hi, Any idea why when I got to 7 days strike instead of receiving a badge as it says at the strike icon, my strike got reset to zero ?
Because you didn't answer a question within 24 hours of the last?
I did, allways did, and I'm eastern time, never went after 11 pm
exactly after the 7th days, got to zero
Every time you answer a question it's set to 24 hours
If that timer hits 0, you lose your streak
so if I answered today at 9 pm and tomorrow at 10 pm i lose the strike ?
There is a timer on the streak that says answer within x hours to keep your streak going if that helps in the future.
I'll try to answer as latest as possible then
Answer one in the morning, one in the evening
That's the easy way
Leave questions that don't require an answer, and use them to extend your streak
Play the system.
thank you
i have problem with attackbox when i turn attackbox on it doesnt want to load anything on internet
okay i found fix in pins
Now Zap is timing out, though I can ping and nmap the box.
"Failed to attack the URK: The host did not accept the connection with timeout of 20000
URL*
Started working and timed out again.
!vpnscript
Cool, thanks, I've had not had any issues at all, I'm thinking it's because I'm fuzzing the URL and it's resetting the connection
Does tryhackme show up as tryhackme on CC bill?
i was just doing some maintenance on my home network and decided to scan my Chromecast, port 10101 looks strange to me
I can't find any references to what ports this device has exposed, I'm not sure if this is typical
wrong channel this is only for tryhackme related tech support
try #infosec-general
[+] Stable internet connection
[+] OpenVPN is installed
[+] tun0 exists
[+] tun0 IP is in the correct range
[+] Only one instance of OpenVPN is running
[+] Confirming connectivity
[-] Something went wrong -- please ask for further assistance in the TryHackMe Discord server, subreddit, or forum
can someone help me with this
im connected but after a while it stops running properly i forget the error i get but when it comes up ill screenshot it
Try switching server or regenerate and wait 30s before downloading.
root@kali:/home/kali# gobuster dir -u http://10.10.46.73 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 5
Gobuster v3.0.1
by OJ Reeves (@TheColonial) & Christian Mehlmauer (@FireFart)
[+] Url: http://10.10.46.73
[+] Threads: 5
[+] Wordlist: /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt
[+] Status codes: 200,204,301,302,307,401,403
[+] User Agent: gobuster/3.0.1
[+] Timeout: 10s
2020/12/10 05:59:03 Starting gobuster
Error: error on running goubster: unable to connect to http://10.10.46.73/: Get http://10.10.46.73/: net/http: request canceled (Client.Timeout exceeded while awaiting headers)
root@kali:/home/kali#
I dont know why iam getting error
Can you try switching VPN servers for me
root@kali:/home/kali# gobuster dir -u http://10.10.52.65 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt
Gobuster v3.0.1
by OJ Reeves (@TheColonial) & Christian Mehlmauer (@FireFart)
[+] Url: http://10.10.52.65
[+] Threads: 10
[+] Wordlist: /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt
[+] Status codes: 200,204,301,302,307,401,403
[+] User Agent: gobuster/3.0.1
[+] Timeout: 10s
2020/12/10 06:07:39 Starting gobuster
Error: error on running goubster: unable to connect to http://10.10.52.65/: Get http://10.10.52.65/: dial tcp 10.10.52.65:80: connect: connection refused
root@kali:/home/kali#
What room is this? Also, can you access that page in browser?
its simple CTF room yeah i can go to 10.10.10.10
Is port 80 open in nmap scan?
Hey I'm starting a blog and want to add some THM-Writeups. Am I allowed to use the THM-Logo for that?
Are you sure?
Using the strings tool, examine the file malware2.dll, can you deduce the download link path?...How would i go about doing this
Hi all
I believe there is an issue with the Pickle Rick machine, is continually times out. Can someone please test?
Think I may have found it, please scratch that for now.
Yep
I don't believe you if you're getting that error
It's working well on other
wat
!vpnscript
+] Stable internet connection
[+] OpenVPN is installed
[+] tun0 exists
[+] tun0 IP is in the correct range
[+] Only one instance of OpenVPN is running
[+] Confirming connectivity
[+] Connectivity checks completed!
[+] You are connected to the TryHackMe Network
what os are you using @compact sparrow
okay
Kali
could show a screenshot of the openvpn command?
weird
@naive dust I was also not able connect using ssh on different room
Not all rooms run an ssh server
I think It was basic pentesting room
Hi.. a couple of hours ago I had a 9 days streak, and now is showing 8 again
contact support@tryhackme.com π
Some help with DVWA room, trying to send cookie to my listening box but having trouble
What am i missing
it's on low security and i can get an alert to fire, just not getting the cookie
Where would the cookie be saved/written?
hey I need help
I have deleted my old account due to some technical reason and I am not able to verify my token in this new account
it is showing that the token is used by my old account
And that account is deleted
@bronze vale
If your old account was delete youβre going to need to contact Muirland
Any help with my question guys?
I can get it to show in an alert, doing <script>alert(document.cookie)</script> just can't figure out why i can't sent it?
Hi, I thin you should go to #room-hints I think this channel is for different issues
thanks
@left solstice this doesn't sound THM related
I have deleted my old account due to some technical reason and I am not able to verify my token in this new account?@everyone
I need help
@naive dust what's your old account username?
Sorry, they don't seem to exist, you'll need to talk to muirland
Hello,
Is it possible to change the THM username?
No
Is there a set guideline for writeups? I have submitted a few now and not heard anything back or seen it get added? Wondering if I did something wrong?
Yes you can email support@tryhackme.com
They'll change it for you
Okie. Thanks!
@wind wedge Will they change it immediately?
You'll usually get an email if it's been accepted or rejected
Kinda yes
Okay guess it takes time then. Uploaded a couple of weeks ago. Thanks!
Writeups are reviewed by the room creator
@astral trout You'll be emailed if it's accepted or rejected.
Just make sure you don't put answers in it
Or passwords etc
When they see the email they'll change it
Yeah it was cleansed. Thanks
Also can you please stop being impatient
Hello, i didn't get my student discount
!docs student
Can you elaborate a little?
James is saying explain in more detail
i tried switching servers, regenerating
oh it just does not connect
as you see in the corner it keeps spinning
Are you running it on your main OS or kali?
Connect from the command line
im in a kali dualboot
DO NOT use Kali's VPN manager
tried it
Kali's VPN manager adds bad routes
That's the method THM tells you to use, so it's the one we can help you troubleshoot
Show us what happens when you try to connect from the command line
That sounds like a great question for google
Hello, if I use THM on a VM do I have to set up the VPN on my host machine or on my VM ?
The VM
Otherwise you'll have issues with reverse shells and hosting webservers and stuff
Ok that's what I thought thanks
Are you in Egypt or another country that blocks OpenVPN?
Ah
It'll be your system time
It needs to be correct, dual boot has issues with system time between Windows and Linux
my dualboot is correct
trust me
the vpn worked fine before i switched servers from the us to europe
oh wait
u said system time
i cant read
sorry
bruh
i googled my timezone
and i made the time correwct
i mean i entered the right time zone but the time is incorrect @eager fulcrum
finally its right
@quasi pollen https://www.howtogeek.com/323390/how-to-fix-windows-and-linux-showing-different-times-when-dual-booting/ so this is what you're running up against RN
Your computer stores the time in a hardware clock on its motherboard. The clock keeps track of time, even when the computer is off. By default, Windows assumes the time is stored in local time, while Linux assumes the time is stored in UTC time and applies an offset. This leads to one of your operating systems showing the wrong time in a dual bo...
no, i corrected the times now
@buoyant vault We do not give out answers
That question is very quickly answerable with google
whats it under then cos when i look under firewall evasion its not there
It's the first result and it tells you in the subtext underneath
well what are u typing in
Literally what the question says
???????????????????????????
It's there
i think ill end any thoughts of a career there
huh?
is it just me or THM is being very slow? i'm get 503s
Yea mine keeps constantly loading everything the dashboard, rank, friends list
I refreshed and it loaded
Yea mine just worked again now
I believe Skidy is aware
π
Hello, I wanted to know where I can contact a mod to ask a question about student discount please π
the mods are discord moderators
Not site staff
Have you read the documentation about the student discount?
!docs student
I tried to find answers to my question here https://tryhackme.com/docs but I didnt I'll try with your link thanks !
how many points do we get after solving a room?
when i try to start any rooms the buffering [red, blue & green] circle is constantly on and not going away
Have you refreshed your cache?
not yet
is there any particular browser its more compatible with?
@wind wedge it worked! great. Thanks alot much appreciated
Support team: http://tryhackme.com/update-timezone redirects me to https://tryhackme.com/dashboard. If I manually go into my profile, I don't see a time zone option (I thought it was there prior to this update?).
@thin acorn Yes, that's correct
It automatically updates your timezone
You don't get an option
Oh wow, very cool! As long as my VPN doesn't mess with the selected time. π
Thank you!
Hey @barren birch I need a help
I had deleted my account due to some technical reason and I am not able to verify the token in my new account
Its saying the token is already using in my old account
Please DM me your token
Okay
I don't think the heatmap syncs up with the streak/ some things do not show up
@bronze vale @royal bay Streak and heatmap tracks different events
Heatmap includes deploys and other things
Streaks is only questions answered
Thanks James
so i have configured my thm vpn
but its so slow
it doesnt even load google in 4 mins
The VPN doesn't touch your internet
It does if you use Kali's VPN manager. It adds 0.0.0.0/0 via the VPN and breaks it all
Yes.
its stuck on initialization sequence complete
That's not stuck
oh
done
Control C in that terminal when you want to disconnect
Change server.
i cant ping my thm mahcine
Make sure you have setup your VPN connection correctly https://tryhackme.com/room/openvpn
Type ps aux | grep openvpn into your terminal and press enter
If there's more than one line (that don't start with "grep" or sudo), do the following steps
Type sudo killall openvpn into your terminal and press enter
Start the VPN with sudo openvpn <path-to-config>
Make sure you're 100% not using the built in VPN manager at all
It should not be tun1
It should be tun0
Therefore you have multiple tunnels running
Therefore something is broke
Is the throwback (paid lab) instance shared with multiple users? Or is it my own lab instance?
You're shared with another user
Ok. I'm wondering if the SQL db got corrupted, the passwords look pretty weird. Could you spot check it? I think it is holding me up on a task.
Reset the network and try again
I clicked reset but of course I need another vote.
If that doesn't fix it, I'll redirect you to the network devs
I guess I could wait for the room to expire, that's the same as a reset.
You can vote for a reset every hour I'm pretty sure
ok, ty.
Any help?
Well 1 there shouldnβt be a space after the -
2 you donβt need to install openvpn it comes with it
Is there a way to do seamless 2-way clipboard on THM's AttackBox?
RDP/VNC in?
No way on browser? I like the splitscreen.
Use window snapping?
That could work if I can find a way to make my RDP client not suck lmao
Good Luck, unless it's the MS RDP Client it's gonna be a struggle
Hey all, can I access the AoC after christmas as well? or only for the current duration of time
Yes you can access all of it after
Awesome! thanks for confirming
This channel is for directly tryhackme related tech support like site or VPN issues
Hi everyone, my vpn is all broken. When I turn my vpn off, it says on the site that i'm still connected. I've tried regenerate and changed regions but with no success... I can't do any machines because I can't connect. Any ideas on how to solve this?
Hello anyone seen openvpn having issues with the CA cert before? i get the following
"Options error: Unrecognized option or missing or extra parameter(s) in medoix.ovpn:25: ---BEGIN (2.5.0)"
Ignore the site saying you're connected
Screenshot your console when you run the command @light crescent
but i still can't connect to any machine
...
I asked you do to something
You already said you can't connect to machines.
@pliant blaze Regenerate. Wait 60s. Redownload.
I sent the message before reading yours π π π
who do i contact about a typo on the thm website?
@toxic cedar #site-bugs if its on the site. #room if it's in a room
It's connected. Try http://10.10.10.10
legend, that worked thank you! π
Happy Hacking
it's working now thanks
did the remaining time for the streak has been removed?
#announcements @proper shuttle
It also doesn't show it all the time
Only with a certain amount of time remaining before you lose it
oh. I missed the announcement. thank you!
Based in an Aussie time zone. I missed the announcement, and my 20 day streak has been reset to 1. (I was actually in a room and had answered questions since midnight, same as I've been doing for the last twenty !@*%$$# days). Just a wee tad unhappy right about now. π¬
send email to support@tryhackme.com and they can give your streak back
Thanks Termack. Yeah, I've sent email to support and to hello@THM, and to Skidy on a Discord DM. They're all asleep at the moment (I think it's about 03:30 or so in UK.)
I've also sent back up email to POTUS, the FBI, Homeland Security, the Australian Signals Directorate and to my therapist. Amazing how emotionally invested one becomes in something like this... π
I am not getting option to update timezone using this link http://tryhackme.com/update-timezone
If I enter http://tryhackme.com/update-timezone I only get taken to my dashboard.
And my country is stated as USA although I never entered USA at all, I am in Europe. I cannot change that at all.
Yeah same for me its redirecting me to dashboard
Ah so it is not just me, that is good to know. What could be the problem?
I also don't know. THM Admins can tell us more
might not be a problem - maybe just does the update because you load the URL??
but why am I suddenly registered as located in USA? I did not change anything and am still in Germany as far as I know :)
The thing is I am unable to change that now.
I hear you. I think there are a couple of issues needing sorted. I had a 20 day streak, and about 12:00 today, the streak calculator decided I had broken my streak. Now I have a 1 day streak. I've DM'd Skidy, and have sent email to support and hello at THM. Trouble is it's only about 06:00 in UK, so they not answering yet. (How dare they sleep!!!) I'm a bit worried, and very pi55ed-off!
Rule 1: No unsolicited direct messages (DMs) to other members of the discord. This includes staff. Verify that the member you are messaging is ok with you sending them DMs. The only exception to this rule is if a situation warrants the involvement of a moderator in order to handle something such as harassment or a situation where another member of the discord has made you feel uncomfortable.
As well as that please do not try to evade the auto mod by replacing characters in words that are blacklisted
@opal canyon @iron dragon When you click the link it automatically updates your timezone so then it redirects you back to the dashboard
Aha so that is how it works, okay cheers!
My apologies for the DM and for the replaced characters. Won't happen again. Could you please direct me to the best path for resolving the issue with my disappearing 20 day streak?
Youβll have to email support@tryhackme.com
yep - I have done that. I'm sure someone will address it... it's only just gone 09:30 in UK
How long has it been since you sent the email?
6 hrs ago - middle of the wee hours over there. It's ok - I'm just a bit shaken... lot of time and 'emotion' invested in getting this far....
You should get a reply hopefully later on today or tomorrow whenever one of the staff sees the email
i certainly have my fingers crossed. πΆ
Have you tried regenerating your file?
Maybe change server
And wait 30 seconds before downloading.
Restart your vm and try it again.
im in a dualboot
Restart it then.
done
And now?
same thing
What server you are on?
Okay try this one more time, switch server again wait 30 seconds click regenerate then wait 30 seconds and download that config and see if you can connect or not.
Also, make sure your internet is fine.
That means it successfully connected.
Visit http://10.10.10.10/ to confirm it. @quasi pollen
yup its good
Great, happy hacking!
thanks!
Wrong channel. Ask in #infosec-general . π
Thanks. π
Is anything that does recon considered an OSINT resource? like Netcraft?
@left solstice This channel is for VPN and other technical questions related to TryHackMe
Please use the appropriate channels.
Sorry dude
Email support@tryhackme.com
ok
I just received an email (claiming to be from TryHackMe) about how Time zones are changing. Clicking the link to update my timezone (yeah I know) it took me to the TryHackMe dashboard, but there doesn't appear to be any timezone options there. Is this an email that's currently being genuinely sent out or phishing?
@azure plank As the email says, that's what's meant to happen
The link is also in #announcements
it changes your timezone automatically
Can i request for changing my username?
Thank You
Either.
ok cool I will just wait for a response than
Hey guys,
I am unable to connect to AdventOfCyber/Day5 machine.
I even ran this troubleshooting script for openvpn, but everything seems to be fine.
Please help.
what problem are you having exactly?
you can't see the webpage when you connect to it in the browser?
@agile flax
well, the task tells you the webserver is running on port 8000
you need to specify the port
Maybe not the right place for this but
When is the "Monthly Hacker" badge awarded, on the first of every month? And is it pr country, or is it "global" ?
Usually on the 31st or 32nd day of your streak
They're not talking about the streak badge
End of the month, top of the month worldwide.
Okay cool, I've still got time then, haha
You're likely to struggle, but ok. Use the OpenVPN app.
That was my initial thought, but it always drops packets
Works flawlessly on android for me.
Eh. I'll see what I can do
Try a different server
Yeah getting some server poll timeouts on East, I'm grabbing west right now
still getting poll timeouts
@barren birch Hey my token issue is not yet solved?
I am not able to verify token to my new account
What's the old username?
I deleted that account
What's its username
username is: haihaihaihaihai
Without the UID I can't force a removal, which means I can't do any more than I've already done I'm afraid. Hors updated it manually in the DB. I can ask him to remove it entirely, which might work.
Other OpenVPN app is frozen on waiting for server reply
Oh, he might not have removed it yet actually. Just wait @naive dust -- he's very busy just now, and things like that need done manually.
Okay
hey
can someone please explain to me this bug
there are no "questions"
and everything is solved
even tho i have never done that room
Leave and rejoin the room
the webpage for Advent Of Code day 5 machine doesn't work for me
even though i specified the port 8000
Screenshot
Use http there.
Oh thanks, it was that simple :D
why is this happening? It was working for months now it suddenly stopped working
changing to http doesnt work
Whatever made the request did it incorrectly. @smoky jackal
This doesn't seem directly tryhackme related
Try #infosec-general
nvm, thanks ninja
anyone gets that
Checking your browser before accessing tryhackme.com.
cloudflare thingy
Everyone gets that @jaunty osprey
usually occurs after a refresh from some inactivity
cool it's new though dn't remember it happening couple months back
makes sense thanks π
I found a bug, but do not have permissions to the bug-submissions channel, how to i submit?
I'm trying to use a reverse php shell, but for some reason it disappears from my downloads folder when I open it???
Only the mods can submit in the bug submissions
"Investigating Windows" is painfully slow through the browser, and will not let me RDP to it, even after 12minutes
Oh ffs ... You know what, I think RDP works, I am just a fool
So
Hello
I'm unable type anything in the attackbox
which is weird because my connection is fine if I can't type here
Odd. What happens when you refresh the page?
And can you see anything in the dev console?
I did that but I'll try again
Worth a shot
Nope nothing's working
Do you have any other browsers installed?
It's weird because I was able to type before - I'm just doing task 9 of the linux fundamentals and have 16mns left π
Yes
Google and firefox
I'm using safari atm
Try with a different browser?
ok
@zealous yoke is this a recurring thing do we know?
Sometimes the attackbox does sometime not allow to type i've run into it a few times but never really bothered me usually i'll just close the terminal and refreseh and allows me to retype again
Yeah can you close your connection and open it again the full screen mode please?
I was emailed yesterday re. This
Trying to diagnose
As in refresh the page and reopen in full screen, or terminate?
Given free users can't do it twice
Refresh the page and open in the full screen mode at the bottom of the split screen pane yes (: sorry should of clarified
Be interesting to see if it works in a different browser as well
Ok ty!
Did that work?
And then close the page that you had open (the split screen and the room)
I've not tried anything yet give me a chance!
π
It's really slow tho ...
Could you scoot me an email with your browser version please @wicked palm Iβll add thst to what Iβve got to try and resolve this
Hi guys, I would like to raise a point that have been bugging me for quite a while and I've even sent a feedback couple of months ago but I was never answered. The attack box is extremely slow, this is because of the latency between my location and the attackbox location. I've seen this point also raised in the subreddit as well. I am sure many of us who are in the Asian continent are struggling with this to the point its unbearable to complete any task sometimes.
Skidy is away for the weekend incase I have to escalate
Email is cmnatic@tryhackme.com if youβd be so kind please @wicked palm (:
Ok
is that your email??
Did that browser change work @wicked palm?
I donβt know any fix to it atm. Could you try the kali machine from the my machine page?
Failing that I can try DMing you a link to my deployed instance in full screen. Not sure if that'll work, but it's worth a shot π€·ββοΈ
Itβs my alias I got setup for places like this (:
I've not tried it yet!! I can't everything at once as much as I'd like to lol - chill your beans!
Sorry ahah
π
Yeah Muirland put your beans in the fridge
Itβs just quite an important issue is all so
Weβre all throwing everything at it π
jesus christ THM treats you well Cmn
Just because yours uses your real name π
Do you know how many hours I do 
legal* name π
Ok I tried on chrome same issue and have sent you an email CMN
cmn how many emails do u get
everytime someone buys merch, i get the confirmation email
just for reference here
no one actually emails me

Thanks so much @wicked palm only thing I can think is trying to deploy the kali machine on my machine page @wicked palm
Iβll take a look into it further tonight/ in the morning
ok
Looks to be working
You, uh, know that passwords don't show up in cleartext anyway, right?
There's no feedback when you type them in a terminal
one minute
Hm?
I knew that yes
It's just
nvm
Ill try this tomorrow
Ok guys I'm going to own this like a boss I made a mistake. I'm completely and utterly embarrassed about my stupidity hence the laughing but I am sorry for wasting your time like this π (I'm laughing so much at myself I can't breathe lmao)
@warm spear mind lending me a hand with the email change? it seems like i can't swap over to my uni email so i can subscribe then swap back :c
just email me ur username, say you're Chev and I'll give you the discount π
like i am logged in to both emails and i updated my email on my profile
oki dokes, it's fine, i just need to receive that annoying confirmation email lol
oh lol that's crappy lol
so if you just update the email it won't send anything, however if you go on the main page and hit "send confirmation email" it does
yep
alr
@barren birch Is my token issue solved?
okay
i havent been able to access tryhackme because ive been stuck on the cloudflare checking my browser and every few seconds i believe its being refreshed because the ray ID changes. is this a problem on my end i can fix?
Hi, I just got on tryhackme, ordered subscription, things are going great, seems to be a great resource, just one tiny problem -- so I was using the attack box, and one time I accidentally clicked some key or button, and it opened the attack box in a seperate tab, so I had the room i was in on one tab, and i could switch to another tab with the attack box, made things alot easier, but I couldn't figure out how to do it, like on purpose...someone help me ?
Helped over DMs (:
Heyo, having some trouble in Advent
Task 7 Day 2, server isn't working
My VPN is working, it worked for Task 6 Day 1
Uh I feel like I should be more specific than "isn't working", sorry
It's timing out in Chrome
Show screenshot.
anyone else having issue with connecting to vpn properly
I tried everything
very buggy somethings wont connect
Cannot upload files. Request to /reset-upload fails when I press Reset Upload (duh)
I don't have any material yet (I tried to upload a vm but it failed)
Iβm not really sure what youβre trying to do but I suppose you need to execute the 404.php by going to <url>/404.php, rn youβre just editing the file
NEVER MIND. Magically fixed
hi, I have a problem with connecting via openvpn to thm, I'm new around here
if someone could assist me (DM me), then I would be grateful π
Can you send a screenshot of the issue?
You could try updating openvpn or use the settings app and upload your openvpn file in the VPN settings bu creating a new VPN connection
Hi all, Im new to this. Can anyone help with an issue ive been having with my Kali virtual box? I downloaded the vmware latest version of kali from their website. when I'm in Metasploit its says msf6 and for some reason when trying to do the Blue room I couldn't run the exploit. it kept saying " Failed to load module: exploits/windows/smb/ms17_010_eternalblue_win8 " but when I used thb's browser based kali it was msf5 and everything worked fine and i was able to complete the room. is there something I need to do differently in my vm kali that's not needed in thm's browser based kalii? Thanks for you help
the same thing still
the connection is timing out
I tried setting the connection on my own kali VM and the VM from kali.org
the result is the same
does not matter whether I use the CLI or through settings
@sonic harbor I also tried changing the protocol from UDP to TCP
also tried changing the port from 1194 to 1337 in the case of UDP
for TCP - 443; still the same
on HTB changing the protocol seemed to solve my problem
wondering if the same could be done here? π€
Through the settings app you should choose to create a new VPN connection (donβt choose the OpenVPN option just the option that lets you create a custom VPN connection) you will then be able to upload the ovpn file then everything will automatically be set donβt change the settings and if that doesnβt work I donβt have a solution youβd have to wait for a THM staff to help you further
you're talking about uploading a custom file to VPN connections - that's exactly how I was doing it π
choosing openvpn would allow me to setup a new connection only - from scratch
Okay then I donβt know whatβs the fix for your issue, send a screenshot of of the VPN settings after uploading the file that would help THM staff to guide you π
not a problem for me π is there a special form where I could upload everything or can I DM sb from thm?
Sb will answer you here
ok, then I have to wait patiently, I guess.... π¦
@sonic harbor thanks for the effort π
Hey @tall copper can you switch to another server such as the Australian server and regeneratting? Please wait at least a minute and give that a go - if the file imports okay after, you should be able to change servers back to say EU-Regular, etc
sure, I have done that before, but I can try again
That'd be great if you could! The minute waiting time is super important π
good to know π though the instruction says 10 sec
I've got plenty of time π
Yes it does unfortunately, It needs to be updated
I'm having the same issues, unfortunately
I'll dump everything to a log file - could I dm it to you?
Could you shoot it over into an email if that's okay?
cmnatic@tryhackme.com if you'd be so kind π
the certificate file would be super duper as well please (:
sure, sending cert over the email channel seems super secure xD
It's a lot better then here π
yeah, I know, just joking xD
π
@zealous yoke sent, if you could confirm that you got it, would be nice π
Hey yes thanks! Just finishing getting my haircut -- seen the email I'll be with you shortly (:
I've just sent you a response with a new config (: pls let me know how you get on!
sure, will try π
Does anyone use VMWare kali linux?
Can I DM you please? @tall copper π
sure, go on
thanks!
yeah it just say this page in not working
something wrong ?
Yes look at the url it is not in the format IP/page
Using the attackbox for the first time now, is there a reason i can't access anything through the firefox browser?
Non-subscribers don't have internet access
ugh
Anyone else having problem connecting to the boxes's websites?
I can ping the machines but I can't curl it / open the deployed website in a browser π€
Just solved it, sorryè
sorry!*
Team, when i use kali attack box in browser its keep on hanging every 5 to 10 seconds i have to refresh browser to work for 5 to 10 seconds . i tried in different browsers also tried in linux machine also but no luck. i am subscribed user. please suggest.
my system configuration.
8gb ram
core i3
1st generation
Thank you
Anyone can ping 10.10.220.207 ip?
If you're trying to check your VPN, try http://10.10.10.10
Thanks! It pings. So VPN works. But after few attemtps the box cannot spawn :/
Not all machines respond to pings.
Its advent machine. It should respond
Not neccesarily
Anyway, Webserwer should be accesible there. But its not
Not necessarily running on port 80
The nmap even with -Pn -V switches cannot find any port port. May I ask for help and not for stupid-guessing of my stupidness?
π
@eager fulcrum i give it 10 minutes already...
Answer the other question please.
with how much extra Resources do machines boot when you are Subscriber?
Double the RAM typically (1GB), but this doesn't apply to all VMs as some deploy with more resources than others
so when you Subscribe you get 1 or 2 GB of ram?
No
?
When you subscribe, room VMs deploy with 1GB of RAM unless they're configured otherwise.
I don't know specifics, but it's more
ok
cuz its impossible for me to do challenges cuz the machine comes online max 40 secs and then it stays online for 2 min and repeats
stays offline*
hi guys
Hey, do you need help with tech related issues?
@wind wedge yes dear
What do you need help with?
Yes, I just said that.
ok
my attack box keeps hanging after few seconds when it is start
and when i use my own kali machine with openvpn then i am not getting meterpreter in steel mountain even in blue room
I am trying to run kali in a container..
suggest me how can I copy my vpn file from host to the container
If you want help with that, please use #room-help
yeah kind of same thing happened with me
That's the same as copying any other file
@quaint wadi then what u did
just generated another openvpn file and connected with it
@quaint wadi i did that already but still the same
Hey I stared the day 12 machine and its not working for me for some reason can someone help?
Youβre going to need to be more specific
What isnβt working?
How do you know?
Can you provide screenshots?
Are you connected to the VPN?
Have you deployed the machine?
yup Im dumb xD thank you
@zealous yoke can I dm you? π
I am working Task 17 [Day 12] Networking Ready, set, elf. I confirmed I am on the VPN, but I am not able to ping the box (my given address). I have waited well beyond the suggested 5 minutes.
Should I terminate the current box and VPN and start over?
it's a windows host, you shouldn't be able to ping
*not all windows machines respond to pings
ok, I was thinking that was maybe part of the challenge so I jumped to nmap. I started my scan and then for the heck of it opened another tab and did the same scan as DarkSec (but include sudo). My results failed vs Dark's video had several responses.
Screenshot
Add -Pn, see if it works
Thank you for the help. I now get the needed output. I see I am on a newer version of nmap vs what Dark is using, but I haven't had any nmap issues (since remembering to use sudo LOL).
So why the "nmap -sVC ip" command doesn't work ? I have the same issue
Try nmap -sC -sV
It is not one command they both are different check nmap -h
Example command from DarkSec: https://youtu.be/6DOp2Fn1AsQ?t=1074
Play Advent of Cyber 2: https://tryhackme.com/christmas
TryHackMe Official Discord: https://discord.gg/tryhackme
TryHackMe Room: https://tryhackme.com/room/adventofcyber2
Thumbnail Design by Varg: https://twitter.com/Vargnaar
John Hammond's Channel: https://www.youtube.com/user/RootOfTheNull
TheCyberMentor's Channel: https://www.youtube.com/...
will open to the exact spot
Only the -Pn command is working for me
Same, I am only guessing it is because of our version of nmap vs what DarkSec used in his video.
When I'm on Windows as my host os, I can connect to openvpn just fine. When I switch to Linux as the host, then connect to the vpn i lose all traffic. I can still view like things within the scope of 10.10.x.x but that's all that is allowed. This happens on both my laptop and desktop. Am I doing something wrong with openvpn when I use Linux as the host? I've tried in both vm's and bare metal.
Hi, who do I contact about billing support?
@white fable email support@tryhackme.com
@zenith veldt Don't use Kali's VPN manager. Use the command line. Don't connect from any other device at the same time.
Cheers
ip route add 0.0.0.0/0 via [gateway ip] dev [public ethernet adapter]
That usuallty works if you use VPN manager
Well CLI is working now appreciate it!
I've been completing a number of rooms and I've noticed that some of the rooms I've joined have been reset and I've lost my progress. Has this happened to anyone else?
VPN is connected, and I've deployed a machine on the advent of a cyber, got the IP, but can't ping it for some reason, I've regenreated and changed location of server as well
Not all machines respond to pings. Especially windows machines. @empty pulsar
There's nothing wrong.
interesting, good to know, thank you π
@naive dust Are you aware that's illegal?
Its not, i had his permission for do it
@naive dust Please don't discuss this in tryhackme
Ok, sorry. I'm going to delete the messages
Are you in Egypt or another country that blocks OpenVPN?
Make sure your system time is correct down to the second
If it is, then try a different server
So I never got a email back regarding me changing my username for my account
How long ago did you email
maybe about 3 days aog
ago
I wanted to change my username if that was possibel
possible
so your saying I have to wait a week lol for if it's possible for a username to be changed
there is no tryhackme admins in here lol
oh ok
It's entirely possible to get your username changed
gotchu thank you
Just don't be impatient about it
sorry I did get a email just responded back
so for linux walkthrough lab part 2 , do we have to download open vpn than ssh into the macine
machine , because I am SSH into the machine using putty like in the instructions and it is not letting me connect to it
.
will there be any upgrade from old to new kali machine on THM?
Hello! I'm stuck on Network Services room https://tryhackme.com/room/networkservices
I cannot get tcpdump working. The device "tun0" does not exist. Honestly if someone decides to help me, great! Either way is cool with me. Sorry if I broke any of the rules of this server or if I'm in the wrong channel. Thanks
Hello guys, I was wondering if it is possible to change the country of my account?
Please delete the image as it contains answers. And tun0 is not present in attackbox. You can try eth0 there.
Hey there , I think your firewall is blocking us on Day12 machine.
Can't complete the challengeπ©
@long zenith - What question are you struggling on.? You can DM if you like.
Hey im just starting out with some of the stuff on the website but im a little confused with openvpn
when running it in terminal should it just end or is there more after this
@celest carbon That looks good!
Oh ok sick
You can always double check by entering 10.10.10.10 in a web browser to double check to see if you're connected.
Oh thnanks , I guess I figured it out. Thanks you.
I didn't knew that windows machine oftenly don't reply to ping. Now I know that.
Thanks brother
No worries
Hi, there won't be this. This is as a restriction by Amazon and plus the newest Kali (i.e. msf6) really doesn't work too well for the machines on TryHackMe
AttackBox is the only thing that is actively maintained atm built specifically for THM combat this (:
I know its something simple but getting udp error when using ufw and connecting
I have 1194 is there another rule i need added?
@frosty frost You do not need to add any ports, because it's outbound traffic. 1194 is the server port.
cool
I cannot create an account. The following message: You cannot signup without using a secure password! continues to appear. I use a strong password through a password manager.
Refresh your page -> Try a different password
You can always change your password after, see if it's the password you're using
Another password worked. thanks
Found 3 results...
c:\flag1.txt (24 bytes)
c:\Users\Jon\Documents\flag3.txt (37 bytes)
c:\Windows\System32\config\flag2.txt (34 bytes)
meterpreter > cat c:\flag1.txt
[-] 1016: Operation failed: The system cannot find the file specified.
meterpreter >
why i cannot open it bro?
Hi, I can't access VMs (day 12 of AOC and Vulnversity, I have only tested these 2). My VPN is connected (Initialization Sequence Completed and I got an IP address) and I can ping 10.10.10.10. I have restarted the VM, re-downloaded access pack + tried swtiching server and tried on Windows and Linux. However, I was able to access the "OpenVPN machine".
Not all machines respond to pings or run webservers on port 80. How are you checking if you can access them? @vivid girder
Yes, I tried to access the day 12 AOC VM from my browser but I got a This site is inaccessible
Not all machines run a webserver on port 80
I also tried nmap but I got an error (host is down) and the VM doesn't respond to ping
so for those having the issue with nmap and ping'ing the server, you can't ping the server, so when you nmap just enter -Pn to your command line and you should be good
-Pn in nmap will give you results
this I figured out after my man taught me somethign new
Even then, firewall wise, sometimes boxes can seem to block Nmap's ping probes but not the ping command
i assume that's when you have to get all stealthy with your nmap commands
Nah just -Pn
I was using the right port on the Day 12 VM but it is working now (I don't know what was wrong). Thank you
My VPN is working fine, but the room "All in one" barely responds, the only page that doesn't time out is the main page itself
Even trying to traverse its' directories is returning with time out issues
Redownloaded the config file for the VPN and restarted the box, but if that doesnt work then idk
im getting this error when using gpg2john ```
Bad parameter: give(len=106935040, buf=0x558324191f80, buf_size=90000), len can not be bigger than buf_size.
i updated john also
Lost my 19th streak even though I was active every day :?
i ran thm-troubleshooting script
That doesn't show your streak, streak is how many questions you've answered, that's when you may have loggedon on deployed machine etc
@silk prawn The heatmap covers different activity to the streak
It's a heatmap
Not logging in, blackout
everything is fine until it tries to confirm connection, then it tells me that something went wrong and to ask further assistance here
Reboot.
Me?
Yes.
ok
Ok what's the actual issue that you're trying to fix?
ok wait
We're not obligated to help you. Make it easy.
the machine comes online for 30-40 secs and then goes offline for 2 mins so it dosent respond to pings and becomes unreachable and repeats
Ignore the machine, work with 10.10.10.10 because that's always online.
?
Ignore the target machines for now
Ping 10.10.10.10
Use that instead of the target machine for troubleshooting.
Interact with us. Tell us what you're trying and what's happening. Give us information. We can't help you without information. Make it easy for us otherwise we're going to walk away.
ok il start pinging
PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data.
From 10.10.14.1 icmp_seq=1 Destination Host Unreachable
ip a s tun0 and screenshot.
is it ok if i DM
6: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
link/none
inet 10.10.14.121/23 scope global tun0
valid_lft forever preferred_lft forever
inet6 dead:beef:2::1077/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::5ef1:1c7:8820:7f24/64 scope link stable-privacy
valid_lft forever preferred_lft forever
You can't be connected to both because they share the same network space
They're both 10.0.0.0/8 private space
[+] Stable internet connection
[+] OpenVPN is installed
^[[B^[[B^[[B^[[B^[[B^[[B^[[B^[[B^[[B[+] tun0 exists
[+] tun0 IP is in the correct range
[-] More than one connection running
Would you like the script to attempt to fix this (Y/n)? y
[+] Killed duplicate processes
[+] Connecting....
[+] Connection Process completed successfully!
[+] Confirming connectivity
[-] Something went wrong -- please ask for further assistance in the TryHackMe Discord server, subreddit, or forum
its from 10 min ago
You're ignoring me totally
Well your tun0 adapter is not THM
i have only 1 instance running thats openvpn
but any idea why the site says im connected?
You might be. It can't tell if you're connected properly. Just if you're connected at all.
You seem to be ignoring everything I say
Which is incredibly frustrating and counter productive
Remember we're all volunteers
Kill the other VPN.
i only have 1 vpn running in bash
Hi, I have a problem connecting to the VPN. I'm using VirtualBox to run Linux.
should i reinstall the config package?
No. You're running another VPN. I'm going to stop helping you because you argue and ignore everything I say. It's incredibly rude and just wasting my time at this point. I've told you the issue at least 3 times. Go fix it yourself.
2020-12-13 10:42:59 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2020-12-13 10:42:59 TLS Error: TLS handshake failed
2020-12-13 10:42:59 SIGUSR1[soft,tls-error] received, process restarting
2020-12-13 10:42:59 Restart pause, 10 second(s)
Check your system time @tight wasp
Are you in a country that blocks VPNs like Egypt?
No, I forgot to change my time zone.
hey
I've started the machine about 40 minutes ago and forgot about it.
Hey, do you need tech support help?
Sorry ... typed "hey" without reading the room list ... say a "room-help" channel so used the right one ..sorry!
Hey, is there any VPN problems?
No?
i'm also having issues, can't connect, tried regenerating/switching, but didn't solve anything
any idea why my openvpn is not working?
getting this atm:
im using kali, and ran my openvpn and tried connecting to the deployable machine but it's not connecting
any ideas what I did wrong?
Time out isn't the same as connection refused
anyone got tips on the VPN not working?
I'll try waiting
I want to ban the phrase 'not working'
Says TLS handshake fails
That's a different error totally
Check your system time. Needs to be super accurate, like to the second really.
Well it appears when launching the openvpn connection
And make sure you're not in a country that blocks openvpn
Im not
Then check your system time
can anyone help me with my openvpn?

