#windows-ios

1 messages · Page 19 of 1

fading wraith
#

Had 64gb flash drive. After installing windows , it’s 31 gb. So it just destroy the space completely along with files already there?

wraith timber
#

?

dense mirage
#

Did you put windows on the flash drive?

fading wraith
#

Yes, flash drive or usb drive.

livid bluff
#

They are basically the same thing. But USB Drive is whats typically used anyway for Flash Drives inless its a Micro SD card

last gorge
#

well if that is the drive you used to install windows that is normal. creating a usb install disk erases everything on the drive no matter how big it is

livid bluff
#

Right

#

I was clarifying in case he had used a Micro SD card but as long as the BIOS can boot from it it shouldnt be a issue

rose heron
#

!rank

tidal lintelBOT
#

XMARK6 Cringer (R5 1600+1050ti), this command is disabled in this channel

last gorge
wraith lynx
#

I built a new system should I update the bios and drivers or not

lavish beacon
#

update the drivers @wraith lynx not too sure about the bios

wraith lynx
#

My motherboard disc bios update thing says it has Linux drivers but I’m using windows . Is it still okay to install?

peak notch
#

dont use the disc that came with the motherboard

#

go to da manufacturers website and get drivers

last gorge
#

the disc that comes with mobo is likely to be outdated

dense mirage
#

^

#

Yee

#

Seriously though, where did you get a motherbaord that has Linux drivers?

wraith lynx
#

It’s a b450f gaming 3rd gen Ryzen mobo

#

Turns out the Linux drivers were just in case you installed Linux and not windows lol

wary cedar
#

How do I stop Asus GPU tweak from opening on startup bc it's not in the task manager startup tab or shell:startup

cobalt plank
#

which company has the most intuitive biOS

azure sandal
#

wdym by intuitive?

cobalt plank
#

like, easiest to navigate, not rlly intuitive but more like easiest to use

rocky cedar
#

all personal preference

#

all I know is the one nzxt board they made had bad bios

azure sandal
#

I really like ASRock’s BIOS... but I am a huge ASRock fanboy so...

rocky cedar
#

asrock has a bad reputation for bios

cobalt plank
#

how's asus?

rocky cedar
#

asus seems confusing

#

by people needing help

#

like come on why not just use xmp why call it docp

#

All BIOS got their own share of inconveniences

#

Personal preference in the end

cobalt plank
#

building a PC with my little sister who wants to oc and do it by herself but she's like 10, so which would be the simplist to figure out?

rocky cedar
#

all I know is asrock gets bad reviews for bios being bad, asus bios is confusing :P

#

MSI should be alright, but I'm a MSI fanboy

cobalt plank
#

@azure sandal is ASRock ez to use?

rocky cedar
#

what other companies are there

cobalt plank
#

lmao bruh

rocky cedar
#

gigabyte

azure sandal
#

I think so... but Mr1 apparently doesn’t

rocky cedar
#

they're good I think

cobalt plank
#

msi, gigabyte, asrock, asus

rocky cedar
#

whats that one board

last gorge
#

nah asus bios is fantastic

azure sandal
#

And I think Gigabyte is bad but Mr1 doesn’t so...

rocky cedar
#

asrock pro4

azure sandal
#

Yeah pro4. Best board

rocky cedar
#

it gets bad reviews for bios iirc

#

otherwise good board

cobalt plank
#

what do u guys think of asus prime z490-a?

rocky cedar
#

oof intel?

cobalt plank
#

ofc

rocky cedar
#

...

cobalt plank
#

want 10th gen

last gorge
#

yeah im not a fan of asrock

cobalt plank
#

also want to get her oc insurance just in case she messes it up, so I want intel

azure sandal
#

We we’re talking about AMD this whole time lmao

rocky cedar
#

oc insurance?

cobalt plank
#

yea

azure sandal
#

Poor ASRock... everybody hates them peepoSadSip

rocky cedar
#

I'm pretty sure intel is the people that say using xmp profile is ocing lol

cobalt plank
#

well intel also has better performance unless ur willing to cough up 4 grand for a threadripper

rocky cedar
#

...

#

3950x

#

but basically we can't help you with intel bios

last gorge
#

since when is there oc insurance

rocky cedar
#

we all got amd boards

#

idek what oc insurance is

#

neither amd or intel insure your boards for ocing lol

azure sandal
#

It sounds like a warranty for people who overclock

rocky cedar
#

intel doesn't just let you run 1.5v through the chip and let you rma it

last gorge
#

well usually frying your cpu isn't covered in any warranty unless it was a faulty mobo

rocky cedar
#

mhm

#

and mobo warranty has nothing to do with amd or intel

azure sandal
#

Idk what it is either that’s just what it sounds like

last gorge
#

yeah idk ive never heard of a warranty of sorts for overclocking, overclocking has always been at your own risk

rocky cedar
#

huh

#

interesting

#

huh okay I guess they're willing to give you a new chip for 40$

#

cool

last gorge
#

probably should read the fine print on that tho

rocky cedar
#

tryna find the fine print lol

cobalt plank
rocky cedar
#

its hard to find

#

like

cobalt plank
#

I just linked it

rocky cedar
#

a bit late there

cobalt plank
#

lmao sry laptop my mac died

#

forgot to charge it last night

rocky cedar
#

good for intel if they decide they'll replace your chip for 40$

cobalt plank
#

ikr

cobalt plank
#

yeah so>

rocky cedar
#

I guess it covers everything

#

including ln2

#

and helium

cobalt plank
#

The Performance Tuning Protection Plan applies to issues directly related to performance tuning and provides a one-time replacement of an eligible processor that fails due to overclocking the eligible processor outside of Intel’s published specifications.

rocky cedar
#

seems neat

cobalt plank
#

i mean

rocky cedar
#

there is no fine print so good

#

you can sue them

cobalt plank
#

im def not gonna try oc to 8 ghz, so I think its pretty good

rocky cedar
#

if they pull smth

cobalt plank
#

its intel

rocky cedar
#

also, it might only cover using the "performance maximiser" thing intel has

#

but well it's not in the fine print

last gorge
#

it is covered if it is "used within Intel's published specification"

rocky cedar
#

so use it as you like

cobalt plank
#

they would be killed by the ppl who are just barely hanging on to "performance or price" if they pulled a fast one

rocky cedar
#

abuse it while you can

cobalt plank
#

its spec is pretty reasonable

last gorge
#

they also note that the plan may be discontinued

rocky cedar
#

yea

#

at any time

#

but

cobalt plank
#

and why would they do that anytime soon>

rocky cedar
#

seems abusable

#

ppl just tryna get records

#

spend 40$

#

put 1.5v in the chip

last gorge
#

looks like it's one time replacement tho

rocky cedar
#

get it while you can basically

#

ye one time chip

#

for seems like no strings attached

#

"the terms and conditions of the Plan changed by Intel, at any time"

#

but

#

"all Plans purchased prior to the date of discontinuation or the date of such change(s) will remain in effect and be honored according to the terms and conditions accompanying the Plan at the time of such purchase."

#

so get it quickly while you still can

cobalt plank
#

intel isn't gonna try and pull a fast one

#

and why would u need a replacement more than once>

rocky cedar
#

they might discontinue it once people start abusing it

#

just saying

cobalt plank
#

well what abuse is there, there is absolutely nothing to gain other than 20/30$ to troll intel

#

and I find it hard to believe that oc'ing a cpu over 5.3/5.6 is gonna hurt the cpu if there's liquid cooling

rocky cedar
#

OCing records

#

if I was ocing with intel chips

#

I would do it

#

just run 1.5v and highest freq

#

oops chip died

#

rma

cobalt plank
#

tru

rocky cedar
#

and if it doesn't die for like 10min

#

get easy benchmark scores

#

flex

#

thats what intel is all about anyways

#

flexing the 5% gain

#

so why not flex a 5% gain on a 5% gain

#

Just saying, its a good thing, but a bit too good with no strings attached

tacit wren
#

can someone help me

#

im doing what google said

vast summit
#

Whats the question?

potent siren
#

I don't OC stuff, but I'm trying to learn how to update my bios without bricking it

#

Based on the name I assume this is the right channel?

dense mirage
#

@potent siren You might not need to update the bios. What are you trying to accomplish?

cobalt plank
#

LMAO yes

#

I mean

#

get a mac with an eGPU and upgrade its RAM, dual boot windows onto it, and you've got a pretty beastly machine

last gorge
#

now which of the bottom right 3 should i choose

cobalt plank
#

🤔

tepid silo
#

arch btw

split quartz
#

Hello! I’m not sure if this is the right place to ask this but on my PC, when I try to copy files from one drive to another, I get speeds of just a couple of MB/s even though both drives are NVMe drives with speeds of around 3.5GB/s

azure sandal
#

Try monitoring the temperatures on your SSDs. If they're getting hot they could be thermal throttling

tepid silo
#

Run a userbenchmark and posts the resutls

dire onyx
#

Do I need 16GB or 32GB of Ram for Windows 10?

wheat quest
#

you only actually need like 4GB for windows itself, anything beyond that depends on what you want to do with the system

#

actually i think 32-bit win10 only requires 1GB, 64-bit requires 2GB

potent siren
#

Just haven't updated it since I had built it

#

@dense mirage

fading crest
#

i would say 16GB is a nice spot for most of us @dire onyx

dense mirage
#

@potent siren if the system works well, i wouldn't bother with the bios. It's always kinda a risky operation

potent siren
#

Only problem I have with my pc is major frame drops sometimes

crude sun
#

Help

reef horizon
#

Anyone have problem for AMD Radeon Software not opening in games when using the shortcut?

livid bluff
#

I havent had that issue ever. Sometimes it takes time to open but it eventually does

reef horizon
#

it doesnt open for me

livid bluff
#

Did You change the default Shortcut command?

reef horizon
#

I press alt + z then i cant move my mouse or what ever.

#

nope

#

never opens in anygames

livid bluff
#

I believe the Default is Alt+R

#

Alt+Z is the Sidebar

reef horizon
#

thats the full screen and it also doesnt open if i click that

livid bluff
#

Alt+R is full screen. thats odd then cause I havent experienced that Issue. What version of the Drivers are you running?

reef horizon
#

at the first week that i got it, it works fine and after that it doesnt.

#

20.5.1

livid bluff
#

Thats the Beta version thats out. Then there is a Bug in it that needs to be reported. Stable is 20.4.2

reef horizon
#

i have a

R7 3700X
TUF X570 WIFI
RX 5700XT
16GB 3600

#

I updated it to the latest to see if any fixes but nope.

livid bluff
#

Yeah theres a Bug in 20.5.1 then. I run the same driver package since I have a 5500XT

reef horizon
#

i usually see a pop up of the full screen but now i dont.

livid bluff
#

Give me a sec

reef horizon
#

even before the latest update. Been like this after 2 weeks of use.

livid bluff
#

Thats My Screen Right Now.

#

There is no 20.5.1 update as a recommended update

#

You have your software set to look for recommended and optional. Optional is a Beta Driver

reef horizon
#

Yep its switch to that.

livid bluff
#

I would recommend downlaoding the 20.4.2 driver package and see if everything works with that driver package

reef horizon
#

I tried a clean install for my drivers to see any fix but nope.

livid bluff
#

Yeah If you did a clean install of 20.5.1 it will still have that bug issue

reef horizon
#

no no

#

i cleaned install before updating it to 20.5.1

#

I had a different version before 20.5.1

livid bluff
#

Ok so Before Updating it to 20.5.1 did everything work correctly?

reef horizon
#

Sorry if im making in complicated/

#

Nope

livid bluff
#

Hmm What brand GPU do you have?

reef horizon
#

Gigabyte

livid bluff
#

Ok Same Brand I have then

#

Thats weird then since its the same Manufacturer I have and Im not having any issues with my 5500XT

#

You may have to DDU the GPU drivers from Windows In Safe Mode and Download the stable 20.4.2

reef horizon
#

hmm i see

#

another clean install then :/

livid bluff
#

Essentially but DDU will get rid of all traces of the Drivers for the GPU and basically give you like a Day One Install of the GPU in the system

#

I had a RX-470 and then swapped in my 5500XT but I had to DDU the driver package for the RX-470 cause there were features missung from the Radeon Software that are available with the 5500XT

#

Both Cards Ran the Same software so I thought it was going to be a Simple Plug and PLay and no tinkering with Driver software

#

I was wrong

thorny holly
#

Do I need a flash drive to install Windows on a new PC, or would an external HDD work?

near furnace
#

which antivirus/antimalware solutions/combos do you think is best and why ? 🤔

dense mirage
#

For windows I assume?

#

My advice would to be just use windows defender and d.d.d.s.

#

d.d.d.s. is one of the best antivirus and antimalware solutions out there, is 100% free and takes basically 0% system resources

rocky cedar
#

ddds?

#

(link please)

dense mirage
#

__D__on't __D__o __D__umb S***

rocky cedar
#

oh

#

common sense lol

dense mirage
#

yup

rocky cedar
#

common sense is best antivirus

#

but

#

yaknow

dense mirage
#

yup

#

WinDef will fill in most of the gaps

rocky cedar
#

some stuff might not seem dumb to some,

#

but

#

yea

#

I still like malwarebytes

dense mirage
#

They're decent

#

Obviously still not perfect, but ya know

smoky pagoda
#

not everyone is perfect.

#

so I suggest MalwareBytes

vast summit
#

Same

junior cliff
#

I have a tournament tomorrow and I cant find help anywhere, i need someone to Vc with me so I can share my screen.

mint wigeon
#

Well whats going on?

junior cliff
#

Its hard to explain, im better at explaing over voice and showing

#

I had many problems in my past and I just now reinstalled windows to fix it so (I could restart.

#

I just turned on XMP because my memory is meant to be dual channel but Is quad, and running at 2133 when it should be 3200.

#

But basically~

tidal lintelBOT
#
Rayans#2479 has been warned

Reason: Bad word usage

tepid silo
#

Run a userbenchmark to show us your system specs
Post the result

junior cliff
#

Oops.

#

I have a i7-9700k with 2080Ti with 11Gb Of Vram. My Cpu is clocked at 3.6Ghz but the ring frequency is clocked at 4.6 and it sets my clock to 4.6Ghz. I have a 1Tb HDD and a 500Gb SSD and 32Gb Of GSkill TridentZ Ram (8x4 3200mHz)

#

Even still I dont hit 240 Stable Frames

#

So I resort to optimization which helps

#

Until something screwwws up and makes my Pc really slow

#

Like 50 Frames Slow.

mint wigeon
#

Something take up a lot of resources? Do you have an antivirus?

junior cliff
#

No it couldnt be any of those

#

I had factory Rest my Pc

#

Nothing was on it

#

but Basic stuff

#

GeForce, Steam, Epic, Discord, drivers and what noit

#

I think its the way I optimize

mint wigeon
#

Are your graphics drivers installed properly and up to date?

junior cliff
#

Yes

mint wigeon
#

What is your monitors refresh rate?

white moat
#

ya i'd run a userbenchmark to see if a part is throttled or something isnt right

junior cliff
#

240Hz

#

It isnt throttled I checked

rocky cedar
#

check

#

dew it

junior cliff
#

Well its 0.43% bottlenecked is what I mean

#

I basically its running fine right now

#

As I have barley anything installed'

rocky cedar
#

bottlenecking calculators are horrible

junior cliff
#

and done no optimizing

rocky cedar
#

just dont

junior cliff
#

Oof

rocky cedar
#

run ub

junior cliff
#

?

tepid silo
white moat
#

this is like the only userbenchmark is useful kekw

junior cliff
#

whats it called:?

rocky cedar
#

lol

white moat
#

😳 @rocky cedar imagine still having rookie

rocky cedar
#

lol look at yourself

junior cliff
#

Could I vc with anyone and walk them through the way I optimize, to see what Im doing wrong??

rocky cedar
#

imagine not having Legend

#

Just run userbenchmark so you know what is wrong

white moat
#

imagine not being yellow smhmyhead

rocky cedar
#

before other stuff :P

junior cliff
#

I will

rocky cedar
#

PURPLE IS GLORIOUS

junior cliff
#

its running

dense mirage
#

BLUE!!!!

white moat
dense mirage
#

Blue improves cooling performance

mint wigeon
#

Bright blue is colder than dark blue though

rocky cedar
#

lol

tepid silo
dense mirage
#

Mine is a UFO whatever that means

white moat
#

only 111% on ur cpu weak

tepid silo
#

sigh ln2 time

summer bough
#

your gpu is off the charts

#

😐

dense mirage
#

Yup. Means nothing

#

Which, funny story.

white moat
#

did u see the ssd percents intender :v

tepid silo
#

The percentile charts are pretty meaningful imo - the GPU bench is unrealistically easy though

#

It's not rigorous enough so i can run 2370mhz core clock - that's extremely unrealistic for a gaming load lol

#

Best I could do in time spy was 2175

white moat
#

the ram is kinda wack like im just running my in xmp and am the 98th percentile

summer bough
dense mirage
#

Suppose you do two blender renders, one on 3950x and one on 1660s, guess which is faster?

junior cliff
#

I did it

#

Doesn’t look like there is an issue

white moat
#

probably the 3950x bc of the sheer power

dense mirage
#

Yup

#

The 3950x renders faster than a bloody GPU

tepid silo
#

Depends how parallelizable the workload is

junior cliff
tepid silo
#

And what instruction sets are available

dense mirage
#

It's a blender render

tepid silo
#

Share the url

junior cliff
#

It doesnt look like anything is wrong

#

so it must be my optimizaitons

dense mirage
#

Wow

white moat
#

dunno that gpu is 20th percentile

summer bough
mint wigeon
#

Rayans do you have any OC on that GPU

white moat
rocky cedar
#

gpu bench looks a bit low

tepid silo
#

GPU could be clocked a bit higher - but it's 100% not the cause of any of your problems

#

In fact, I don't see any problems there

#

That said, it's still the easiest way to show us your full specs, bios date, driver versions etc

junior cliff
#

Exactly

dense mirage
#

Memory latency is a bit high, no?

junior cliff
#

I have no OC

#

I dont know what right setttings I should do

white moat
#

60ns isnt that bad is it?

rocky cedar
#

nah memory latency is just fine

#

it's normal

junior cliff
#

Thats the issue

white moat
#

mines like 10ns lower feelsbadman

dense mirage
#

For intel on 3200 though?

rocky cedar
#

3200cl16

junior cliff
#

Im using XMP on 3200Mhz

rocky cedar
#

not cl14

junior cliff
#

Its originally 2133

rocky cedar
#

so I don't feel theres an issue

junior cliff
#

Thats the point

white moat
#

i mean i'd imagine it would impact a little, but not super bad

tepid silo
dense mirage
#

Okay

junior cliff
#

Its my optimizxation

rocky cedar
#

lol

junior cliff
#

But I need help doing it then

white moat
#

forks stop breaking everything

junior cliff
#

seeing as I screww it up everytime

dense mirage
#

How in the world do you have a 100% percentile CPU?

#

And GPU

white moat
#

3/4 of his parts are

#

just oc it

dense mirage
#

And Ram

rocky cedar
#

It's OCed

summer bough
#

wow 35ns

white moat
#

a lot of people probably keep them stock

tepid silo
#

I'll explain how to flex later lol, after we help this guy

dense mirage
#

Su here's what I'ma gonna do

mint wigeon
#

Clear CMOS?

junior cliff
#

I really just need to vc with someone, Im also like bad at understanding stuff lmao

dense mirage
#

I'ma gonna go into regit and tell windows I'm running a pentium III with a gtx 550

#

Then I'll have the most powerful parts of my line ub has ever seen

summer bough
#

dont make fun of the p3

dense mirage
#

I have a pentium III system

#

12 actually

#

I've looked at making a cluster, but my 2700x would have better performance

summer bough
#

im joking. I made fun of them even when they were good.

#

I have one sitting on my desk right now though

#

haven't had time to dig out my motherboard to play with it

junior cliff
#

im confused.

dense mirage
#

The main issue wasn't actually the p3. It was the fact that the motherboard only has 10mbps ethernet

mint wigeon
#

You said something about ram channels earlier @junior cliff, what did you mean by that

junior cliff
#

well

#

i have 4x8

#

but my pc is meant to have 16x2

#

its dual channel

#

Not meant for quad channel

#

but eitherway my pc specs are fine i guess

summer bough
#

its still only dual channel

#

just 4 sticks

tepid silo
#

4 sticks in that mobo is still dual channel

junior cliff
#

Oh

tepid silo
#

Just 2 ranks of memory per channel

junior cliff
#

well I guess then nothing is wrong with my hardware

#

but in the process I do to Optimize my game so I can hit 240 frames stable, when im only hitting about 200.

mint wigeon
#

What game is it?

junior cliff
#

I need that 240, that extra 40 changes a lot for me personally and I just need help setting up my settings and Nvidia And etc

#

Fortnite sadly.

#

Ik everyone hates me for it~

#

but i do wagers all day and its made me good money, so i intend to continue.

mint wigeon
#

Ultra settings?

junior cliff
#

Nope

#

All low

#

VSync Off

#

Multithreaded rendering on

#

1920x1080

#

Resoloution 100%

mint wigeon
#

hmmm

junior cliff
#

I use timer resolution as well which helps a bit]

#

I just

#

Im doing something wrong

mint wigeon
#

timer resolution?

junior cliff
#

its just for like~

#

bcdedit /set useplatformclock

#

whatever that is

tepid silo
#

HPET? Or like, dynamic tick?

junior cliff
#

Yes

#

It gives me better input

tepid silo
#

HPET should already be on

junior cliff
#

or feels as such

#

I turned it on myself

#

But eitherway

tepid silo
#

It was already on

junior cliff
#

oh well

#

i mustve done it tiwce ig

#

But still something I do is wrong

#

Idk what it is

#

Id have to show my full process of optimization.

#

i havent done much yet, im kinda waiting to see if I can call someone and screenshare.

tepid silo
#

You don't need to optimize nearly as much as you think yo udo

junior cliff
#

you are right but then idk what to optimize

#

and how to do it the way I should

last gorge
#

optimize your settings for your needs

#

in game settings

junior cliff
#

most of it needs to be FPS

tepid silo
junior cliff
#

but also Nvidia settings, there secret settings, windows settings

#

should I run that rn?

tepid silo
#

Do you have a benq xb272?

last gorge
#

put as low as you can while still being able to see something

junior cliff
#

No I dont

white moat
#

lol

junior cliff
#

I have an Acer predator 240hz

tepid silo
#

So the acer predator xb272?

#

I mistyped

junior cliff
#

Yes

#

i launched the cmd

#

it showed nothing then closed

#

and idk what to do with the ps1 file

tepid silo
#

Follow the directions

junior cliff
#

i cant find them

#

the read me shows a bunch of stuff

#

i barley understand

mint wigeon
#

download everything, unzip it, and then double click the cmd file.

junior cliff
#

there it goes

mint wigeon
#

👍

junior cliff
#

so what else should I do?

#

I still need my drivers and Nvidia Settings

tepid silo
#

Follow that blurbusters guide

junior cliff
#

huh

tepid silo
#

After reading through it

junior cliff
#

Where>

tepid silo
#

So you understand how g-sync, and other competitive fps stuff works

#

(If you actually want to optimize)

junior cliff
#

G-Sync by itself is best correct?

tepid silo
#

Read

#

lol

junior cliff
#

I did I’m confusing myself lmao

last gorge
#

😉

#

there are nvidia settings in this guide you can use

junior cliff
#

it looks like GSync has less tearing but if it goes above it starts to tear

#

but i wont go above 240 Frames

#

but the thing is I dont even get 240 Frames, I get 200

#

and im trying to get to 240, which will pair perfectly with GSync as my highest refresh rate availible is 240

rocky cedar
#

what game to 240

junior cliff
#

Fortnite

rocky cedar
#

lol

junior cliff
#

yeah ik

rocky cedar
#

it might be badly optimized :p

junior cliff
#

im trying to optimize it properly

#

but i guess im doing something wrong

#

that slows my Pc and makes it go at 50 Fps lmao

rocky cedar
#

..?

#

the game itself might not be optimized

#

anyways

junior cliff
#

Wdym?

peak moss
#

did anyone ever figure out what he means by optimizing?

rocky cedar
#

undo whatever you were doing :P

#

prob just OC

junior cliff
#

Okay what I mean is

#

I go into Nvidia Settings, then the secret settings, I use Timer Resoloution, disable a bunch of stuff in registry editor and add some values.

#

Stuff like that

#

I dont know how to Overclock for frame boost

#

I was told that Overclocking your Gpu does nothing to framerate

tepid silo
#

Tip #1 don't do anything in regedit

junior cliff
#

and that its just your Gpu

peak moss
#

maybe dont do that

rocky cedar
#

lol yea

junior cliff
#

I know I wont anymore but

#

I need to optimize it now

rocky cedar
#

regedit is just trouble

junior cliff
#

for the best Framerate Possible

#

and I dont know what to do

peak moss
#

why do you need to optimize

rocky cedar
#

might've screwed smth up in regedit lol

junior cliff
#

Im only getting 170-200

peak moss
#

you're not getting 240 frames right, but what game and at what settings

junior cliff
#

I need 240 FPS

#

Fortnite at all LOW Settings

#

So

peak moss
#

why do you need 240

junior cliff
#

Because I preform much better at i, I mean I just do

#

Ive tested it out, a day on 240FPS and a day without it.

#

What I mean by that is

#

'Creative' has nearly no load on your GPu as it renders nothing

peak moss
#

is this a 1080p monitor, 1440p or 4k?

junior cliff
#

So I get 240 and I preform amazingly there, however the way I play is no difference, Just not as fast, and more input delay on 200 FPS

#

1080p

#

I play at 1920x1080

#

\Actuaklly

peak moss
#

and how many monitors are connected

junior cliff
#

Now I play at 1790x1080

#

Stretched Res but

#

I have 2

#

One is 240 my main

#

Other one is 144Hz

#

Both are 1920x1080

peak moss
#

ok

rocky cedar
#

might be an issue running 2 monitors :P

junior cliff
#

Wait what???

#

I dont get how I mean~

peak moss
#

it could be. running multiple monitors puts more strain

junior cliff
#

Hm..

#

So what can I do about that?

#

do I just use one monitor instead

#

Also I have a laptop with a capture card next to me~ any idea what I can do with that...?

peak moss
#

you can try unplugging a monitor and seeing if your frames go up but theoretically all the strain should be on the one monitor

junior cliff
#

To maybe reduce strain or something

#

i can reduce the resoloution of my right one

#

nvm i was gonnasay smth dumb

#

Plugging my 2nd monuitor into my motherboard

peak moss
#

i would just unplug one and see if the frames go up

#

yeah that wont work lol

junior cliff
#

Lmao

#

I will try

#

But anything else that really boosts FPS

#

I mean certain Nvidia Settings

peak moss
#

not a permanent solution, just to see if it does anything

junior cliff
#

Or anything else?

#

id prefer to try the monitor thing last

#

as I need to do my settings and drivers first

#

before I even launch the game

peak moss
#

i mean the monitor thing would be the easiest to try tho

#

just unplug it

junior cliff
#

What Drivers do you recommend I install? Z390 and RTX2080Ti

#

Ill try it

peak moss
#

the reccomended latest nvidia drivers

junior cliff
#

No Redistrutables or DirectX or smth?

last gorge
#

you just need the latest nvidia drivers

tepid silo
last gorge
#

no other drivers will give you more performance

peak moss
#

i mean i honestly dont usually dive that deep into that kinda stuff so i wouldn't know. but theoretically you just need to get nvidia drivers, maybe experience center and click "optimize games" without messing with any "secret settings" or anything like that

junior cliff
#

Alright well, thank you.

#

I really appreciate the help

#

So do you think its possible to hit a good 240FPs?

tepid silo
#

Don't use geforce experience

#

Use the nvcleaninstall thing I sent

junior cliff
#

Also~ with overclocking, what should I know before doing it? I would use Asus Tweak

peak moss
#

hitting 240 is hard

tepid silo
#

Don't install asus tweak

junior cliff
#

What????

peak moss
#

also if you're going to OC do a good hefty amount of research before you do

junior cliff
#

I tried but I still dont understand the amouns

#

I mean

peak moss
#

hitting 240 fps constant is not really that easy to do. 170-200 seems about normal imo

junior cliff
#

Damn..

last gorge
#

you can try lowering settings and maybe lowering res to something like 1600x900 if that is in fortnite but otherwise there is no real secret to more performance like that

junior cliff
#

I downloaded NVclean

#

What about that?

tepid silo
#

Read the descriptions for each

#

Just check the boxes for what you need

junior cliff
#

I feel like those are good

#

But those all require GeForce experience

#

Didn’t you say not to have it?

tepid silo
#

Just check phys-x tbh, that's it

peak moss
#

also keep in mind when you say you play better at 240fps, if you have a 240 hz monitor but arent getting 240 you may be experiencing screen tearing and such that may make it harder to play as well as you are wanting, so keep an eye out for that stuff too

tepid silo
#

That's what g-sync is for

junior cliff
#

So maybe set it to 200Hz???

#

and Cap it at 200?

tepid silo
#

no

junior cliff
#

Oh

tepid silo
#

Follow the g-sync guide

junior cliff
#

I have GSync on at 240hz

peak moss
#

do what chopsticks says first

junior cliff
#

I know I read it

#

GSync under the refresh rate eliminates tearing

#

Vsync helps with over

last gorge
#

if you want consistent leave it on 240 with g sync on and cap maybe near 200

junior cliff
#

Okay

#

Thank you for all your guys help

#

I really appreciate it

dry raft
#

vsync does both over and under, not just over. Doing vsync+gsync does nothing better as vsync is just increasing the latency which gsync is suppose to reduce. If you're on Nvidia what you actually want is Fast sync+gsync. As fast sync will allow the GPU to render frames but just not push them to display if it exceeds the monitor refreshrate.

junior cliff
#

Oh damn

#

Well thank you

#

So under Vsync

#

I put FaSt Sync On?

#

Vertical Sync Is on Fast now

#

Also im running 1789x1080

#

Should I cap my refresh at 239, as Ive heard that is better for latency.

tepid silo
#

Read the g-sync guide

junior cliff
#

it doesnt say anything about that

tepid silo
dry raft
#

Unless it is the game or server that is messing with something, capping the FPS isnt better for latency

junior cliff
#

Okay thank you

#

Im sorry im asking a lot

#

its just important to me, although im actually learning a lot, as I thought Optimization meant everything.

#

When its only few settings that need optimizatio

#

Do you guys think that, (this is my last question)

#

Bcdedit /set useplatformclock yes and /set useplatformtick yes

#

It does lower latency but, is that good to keep?

tepid silo
#

Test both

fleet basalt
#

idk if this is where i'd put it, but can somebody help me get my stream settings right? I hav eno idea what they are and kinda wanna stream sometimes

near furnace
#

d.d.d.s. is one of the best antivirus and antimalware solutions out there, is 100% free and takes basically 0% system resources
@dense mirage lolll bu-butttt it's in ma name 👀

dense mirage
#

Does that mean you come with d.d.d.s. pre installed?

#

That would be cool

near furnace
#

so I suggest MalwareBytes
@smoky pagoda I hear that a lot, wondering why it fares so poorly in some independent labs

#

Does that mean you come with d.d.d.s. pre installed?
I'm a possibly lost cause 😢
jk aside tho I think what I need the most is decent web protection
since I tend to open hundreds of tabs at a time
and since I'm no antimalware solution I can't heuristically detect bad links before I open them
hence the need for automated software solutions 🙃
(or any other hacks and tweaks I could do, last resort)

#

That would be cool
only 2 d's tho ((::

ivory rover
#

anyone know why my windows creation thing taking so long?

languid plank
#

Depends on your components and/or how fast your flash drive is

#

Sometimes you just gotta be patient lol

cobalt plank
#

lmao

mint wigeon
#

anyone else have ridiculous issues with ASUS aura sync? at some points it can take up to 25% of my cpu.

#

it seems to just randomly get stuck

white moat
#

yeah i hate aura

#

it didnt work and it took me like 15 minutes to get it work

cobalt plank
#

Icue gang

last gorge
#

Google it, I think there is a previous version that is a bit more stable

near furnace
#

what's your guys' thoughts on Revo Uninstaller ?

mint wigeon
#

Ughhhhh

tidal lintelBOT
#
RyanO8#7363 has been warned

Reason: Bad word usage

mint wigeon
#

whooops

wraith timber
#

what

mint wigeon
#

Asus's stupid lighting software is taking up 30% cpu

wraith timber
#

oh

#

lol

mint wigeon
#

so setting it to a different effect seems to have helped

#

apparently its just the rainbow cycle effect that is a problem

#

which is odd

#

because thats probobly the most commonly used one

#

I wish there was a way to just not use asus's software and have everything sync together with something better designed

wraith timber
#

probably possible

cinder mauve
#

@mint wigeon one thing i found is theres this one developer on github that made a program to sync aura compatible devices with razer synapse

rocky cedar
#

Unify rgb

mint wigeon
#

Hmmm

#

I’ll look into that

cobalt plank
#

Yeah I saw that @cinder mauve , except it was for previous versions of synapse, now it's patched.

#

what I was wondering though, can icue controll aura snyc?

#

bc I need fans for my radiator that's coming in, and I wanted to go rgb but don't have enough room in my budget for icue

mint wigeon
#

Icue can controll aura sync natively without any modifications or anything

cobalt plank
#

k thx

mint wigeon
#

that doesn't really solve my problem though, because that requires BOTH pieces of software to be running, including aura sync which was the problem in the first place.

cobalt plank
mint wigeon
#

Its really weird

#

"lightingservice.exe" still runs while doing that

#

I was messing around with that

sand bronze
#

I'm noticing my computer is getting slower and slower to boot up... I'm in start up apps and I'm wondering if i need something like the Radeon SEttings app to start up?

#

how about raptr or realtek audio manager... plays.tv video recorder? why do i have HD Audio background process and HD audio manager lol. groove monitor utility. wtf is that. lol

mint wigeon
#

you really dont need any of that

#

i literally just turn everything in my startup off

#

And a lot of that sounds potentially dangerous so i would try using malewear bytes

near furnace
#

could someone please test if this lil batch script works?
Purpose: block all executables inside a path/folder from accessing all incoming/outgoing connections
I tried on my VM nothing shows up in WF.msc, opened/closed WF too, not sure if I'd have to reboot

    do (
        netsh advfirewall firewall add rule name="Blocked With Batchfile %%G" dir=in action=block program="%%G" enable=yes profile=any
        netsh advfirewall firewall add rule name="Blocked With Batchfile %%G" dir=out action=block program="%%G" enable=yes profile=any
    )```
(after changing the path to match your app ofc, also run as administrator)

Source:
https://www.tenforums.com/network-sharing/43084-how-block-multiple-exe-files-windows-firewall.html
mint wigeon
#

About the issue with arura yesterday, if anyone has the same problem. Set the effect to static or color cycle and set shutdown sync to off.

#

That entirely solved the issue for me

tepid silo
#

Start to analyze your hardware right now! HWiNFO has available as an Installer and Portable version for Windows (32/64-bit) and Portable version for DOS.

upbeat sky
#

@cobalt plank iCue had no problem controlling the rgb of my Asus Zenith II Extreme Alpha before it bit the dust

#

When the pc was off it would revert to its own thing but when on iCue would do its thing. When the board died I had no choice but to get a MSI Creator TRX40 and it has a corsair connector built onto the board.... first I had seen that

#

BUT the last computer I built before my current one was a 2700k so I've been out of the game a while

rocky cedar
#

MSI boards seem to mostly have a Jcorsair connector

#

I'm not too sure why, maybe a partnership, but it's a thing

upbeat sky
#

I'm not a fan of MSI's mystic light either, used it to setup the rgb of my heatkiller gpu block and haven't launched it since

rocky cedar
#

It's only MSI afaik

#

Lol I haven't really touched mystic lights but that's because I'm not a rgb person

#

I use it to turn off rgb :p

upbeat sky
#

I have mine set to red, the wife has the unicorn puke

rocky cedar
#

At least mystic lights can control my gskill ram rgb

#

And sync whenever I want that

fading crest
#

i have mine set to a dark purple, as i am a Mara Jade (Star Wars) fan and her saber was amethyst, and named my computer after her, cheesy yes i know lol

rocky cedar
#

Eh PC themes are PC themes, they're all good in their own way

dense mirage
#

I'm looking for a good, solid document/PDF editor that will allow fancy formatting... word isn't really enough

tepid silo
#

LaTeX

dense mirage
#

Yeah, I'm about ready to do that. I was hoping I wouldn't have to go there though

tepid silo
#

It's like learning vim - feels like chinese at first, but it grows on you

dense mirage
#

I know it, it would just be a pain to do what I had in mind. I had been hoping for something like html+css, but for a printed page

upbeat sky
#

Open office might have what you want.

#

I believe it can save to latex and pdf.

dense mirage
#

I'm using libre office right now. It doesn't seem to have hierarchical components though

last gorge
#

yo quick question, does libre office use same file type as word

tepid silo
#

Not by defalt, but you can save files as a word compatible format.

dense mirage
#

It can also read files that word saves

warm osprey
#

so I'm not super happy with this "dark theme"

#

The program (voidtools Search Everything) lets me change the colors in the list, and I've set the titlebar to black through Windows' accent color setting.

#

However I'm wondering if there's a way to change the color of the other elements there (scrollbar, table column names, search box, etc) without modifying the program.

#

I've never done anything related to Windows-specific development, so I'm not really sure how that'd work.

#

I do notice that a lot of apps seem to use the same UI framework of sorts (Task Manager's elements look virtually identical to those of Everything), so I was thinking maybe whatever library that is provides a way to set this system-wide?

dusk marsh
#

does here anyone know the best Nvidia panel settings for best performance

vast summit
#

Idk if anyone has heard of asus armoury crate before, but it came pre-installed on my new mobo and I think its actually really cool. It has aura sync built into it which runs better than the software by itself imo. It also lets you install all drivers directly from in it.

#

Don't know why I'm saying this lol, I'm just impressed

upbeat sky
#

Its decent software but its also another resource hog to have running, shut it down in the service manager or set to manual start so it only runs when you want to check for updates

vast summit
#

Oh ya for sure

edgy bridge
#

Do you guys know if I can use HP Pavilion Touchsmart All In One PC as a monitor and get a motherboard build my pc and connect it to it and it being better?

sweet pond
#

Hey Guys, ive been having a bit of an issue with the lighting control on my Asus Prime B450M-A Mobo, every time i restart my PC or power it up from a shut down and then log into my pc, it shuts off after a few seconds to a min. It's really not that big of a deal but its really annoying because i want my lights to stay on, if anyone has a possible solution or an idea please let me know. Thanks!
P.S. Asus aura sync and all my drivers are up to date, and heres a link to my exact mobo if anyone would need to use it to help, https://smile.amazon.com/gp/product/B07FKV5HWJ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Im open to any suggestions, and again thanks to anyone that does...

gaunt mural
#

Anyone know if you can download the OS for macbook straight from apple?

cobalt plank
#

@gaunt mural no lol

#

it's apple

last gorge
#

download?

cobalt plank
#

what r u trying to do, build ahackintosh?

last gorge
#

I think you can if you own a apple product @gaunt mural

cobalt plank
#

@last gorge no you can't

#

I've tried

last gorge
#

yes you can download the iso

cobalt plank
#

only for sierra

gaunt mural
#

Trying to fix my old macbook. I dropped it last ngiht and now it wont boot

last gorge
#

Command + r for recovery mode

#

see if you can boot it in recovery mode

gaunt mural
#

That worked. Thanks

last gorge
#

np

ivory rover
#

@rocky cedar where do you get your windows keys from??

rocky cedar
#

eBay

ivory rover
#

just any of them?

#

also how does delivery work??

rocky cedar
#

They'll either send you a message on eBay or email you

#

Any of them, even if one is a scam it's only 3$ you know

wraith timber
#

at least it's not a $100 scam

ivory rover
#

WW

ivory rover
#

also @rocky cedar does it matter whether its windows 10 home or pro cause the "non-genuine" i have is a home version

rocky cedar
#

Doesn't really matter

ivory rover
#

okok cool thanks

cinder mauve
#

How to install Windows 10 Pro x64

supple cairn
#

@cinder mauve

#

Paul helped me a lot for my first build

cinder mauve
#

Really?

#

Yeah he is good

#

But the thing is I hate windows 10

#

I need to install windows 7

#

I cant find drivers

#

At all for the Maximus XI hero

supple cairn
#

well u asked for windows 10

last gorge
#

windows 7 is not supported anymore

peak notch
#

run windows 10 LTSC

#

its a zip folder, inside of which is an official copy of 10 LTSC

tepid silo
#

Don't share the vlsc version lol

peak notch
#

why not

#

😢

#

its not cracked or anything, you still need a valid license key

#

ya kno

tepid silo
#

That's what the trial version is for

last gorge
#

well ltsc is not supposed to be for normal consumers

raven yacht
#

My pc won’t turn on. Blue screen and I don’t have my windows disk anymore.

cobalt plank
#

ffff

dense mirage
#

What does the blue screen say @raven yacht?

raven yacht
#

Corrupted windows files, and I no longer had windows 10 CD so I had to pick one up cause it’s the only computer in my house.

dense mirage
#

Woot

#

i3 for the win here

dense mirage
#

oof

#

I use nmtui

tepid silo
#

i3

dense mirage
#

Come on forks, for a light weight system i3 is the way to go 🙂

dense mirage
#

heh

near furnace
#

has anyone tried to make dividers using transparent icons and pin them to the windows 10 taskbar ?
the transparent icons turn black once pinned for me

dense mirage
#

Fun

#

What image type are you saving it as?

near furnace
#

I first saved it as png and make sure it's transparent

#

then saved it as .ico

topaz lodge
#

I just turned my pc on and got the BSOD recovery screen, I went into “debugging mode” and my screen is just black now, it’s still on though. It was error code 0xc0000221. What should I do now?

dense mirage
#

Did you change anything recently?

topaz lodge
#

I was changing ram speeds becuase they were stuck at 2133, but I got them up to 2866, but everything ran smoothly

#

I also updated my bios, which went well too

#

I get that I might have to reinstall windows, but how do I safely get out of this black screen?

dense mirage
#

Give it the one finger salute

#

If it's just solid black, a forced reboot won't harm anything

near furnace
#

I'd hoped you were talking to me when you mentioned "solid black" for a moment hahah

dense mirage
#

Nah, the screen

#

What happened with your computer?

topaz lodge
#

Ok I’ll give it a shot

#

I got no clue

#

I just booted it up and that came up

#

Error 0xc0000221

dense mirage
#

So there's text on the display?

topaz lodge
#

There was

dense mirage
#

Try a cmos reset

topaz lodge
#

But I entered debugging mode cause I thought it might fix itself

#

I’m bout to power up again after my forced reset

#

Hope nothing s fried

#

Why can’t I send pictures on here?

#

Ok I’m up, and pressed continue to windows 10, msi now says automatic repair

#

I think it’s auto repairing, correct?

#

Ah, it now says “automatic repair couldn’t repair your pc”

tight bluff
#

f

topaz lodge
#

Ok, I got 4 options, continue to windows 10 (which I just tried), use a usb device, trouble shoot, and turn off

#

Should I try troubleshoot?

#

Ok, I have no idea what in the hell just happened, but it fixed itself and I’m back in my pc

dense mirage
#

Cool

#

Windows is like that sometimes

near furnace
#

What happened with your computer?
@dense mirage nothing just that I can't get the shortcut with a transparent icon to be pinned to the Windows taskbar hah
it'd turn black instead

dense mirage
#

Yeah, I'm not sure what's up with that. It's very strange

near furnace
#

taskbar annoyances been plaguing me for years after all

tepid silo
#

Disable MDS with

reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 1 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f

reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 3 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f
warm osprey
#

Back when discord launched their games store a while ago, I downloaded Inside.

#

I don't remember whether I uninstalled it or not, but the uninstall button just opens Discord, and the listed path in Control Panel doesn't exist.

warm osprey
#

I think I fixed it. I searched for the string "DiscordGames" in the registry and deleted all folders containing just stuff related to that.

wary cedar
#

I finally got activated windows and I'm so glad to be rid of that horrible watermark

little summit
#

I was updating my windows 10 and now I can’t open Settings. Anyone know how to fix this?

dense mirage
#

Windows had some issues with the most recent update

little summit
#

So is there nothing I can do? I just finished building it and was updating the Windows 10.

dense mirage
#

No clue. I don't use windows 🙂

gaunt vapor
#

yo is it fine that i enable virtualization in my bios for installing kali linux on virtual box ?

last gorge
#

yeah you need virtualization to use VMs @gaunt vapor

dense mirage
#

You can run VMs without it, but it will be slow as all get out

#

Anyone know of an operating system that can run with 32k?

last gorge
#

can lol

dense mirage
#

It might be 32m. I forget

potent thorn
#

I'm downloading windows iso off of mobile data

#

Because I dont have wifi at home

#

And I want computer done :)

vast summit
#

Yikes. That sounds slow

cinder mauve
#

can i ask for help related with a possible software issue here?

untold hawk
#

hey does anyone stream with streamlabs obs?

last gorge
#

Yeah you can ask software related issue here

dense mirage
cobalt plank
#

lmao

last gorge
#

I always wanted a walking gun/rocket launcher thing

vast summit
#

Who doesn't

tall lichen
#

put this on a usb

#

see if the pc you bought comes with a key

#

if not contact ibuypower about your issue and see if they can give you a key

valid rivet
#

Ok so like where would I see the key

last gorge
#

if it's prebuilt it is sometimes embeded on mobo and you don't have to worry about it

#

you can go through setup and if it ask for key you can skip for now

valid rivet
#

I assume the USB should have nothing on it but the windows install

last gorge
#

when the usb install is created, the media creation tool should reformat and erase everything on it

valid rivet
#

Ok so best bet would me just to use an empty one for now

#

So I don’t lose anything

last gorge
#

yeah

valid rivet
#

Alrighty cool is there anything else I shopping know about before trying to do this?

sand bronze
#

Hey if I. Putting an ssd in my new build I should I stall windows fresh but how do I move over other files and apps without corrupting things? Best to just install and try to configure everything again? I have a layout for trading software so that's ok I guess but like codmw or gta v. How do I get it to pick up where I left off?

#

Well what's the best way rather

peak notch
#

ideally, you just want to do a fresh install of windows, if you dont want to hassle with reinstalling all your programs and games, Macrium Reflect can be used to just clone the current os disk to the ssd

sand bronze
#

Ahhh ty

#

I feel like with some issues like with smart Defrag I shouldn't so that... Maybe just select certain thing

cobalt pulsar
#

yo any good website to get windows for cheap ? ( not pirate bay ahah )

last gorge
#

ebay

cobalt pulsar
#

@last gorge is that how you got yours ?

pulsar patrol
#

@cobalt pulsar go to https://software-codes.com

last gorge
#

no i have one official key, but most people here had luck with ebay, just have to find the right seller

#

software codes has worked for some people too

#

but you have to activate right when you get it

pulsar patrol
#

Eh

#

It still comes for 4$

last gorge
#

oh they have adobe too

cobalt pulsar
#

what do you suggest @pulsar patrol

pulsar patrol
last gorge
#

I think someone just used software codes like yesterday

pulsar patrol
#

But software codes is cheaper

last gorge
#

you can try win 10 pro retail

pulsar patrol
#

I don’t think retail is worth it

#

Unless u break ur pc a lot

cobalt pulsar
#

whtas retail ?

pulsar patrol
#

It’s where u can reuse the code more than once,but not at the same time

last gorge
#

well there is oem and retail, main diff is oem can't move to a new pc

pulsar patrol
#

I just get oem all the time

cobalt pulsar
#

ooo ok

last gorge
#

i would do retail, but your choise

#

¯_(ツ)_/¯

cobalt pulsar
#

ok thx

last gorge
#

just make sure you use it when you get it

cobalt pulsar
#

i was just looking for a good not sketchi website haha

#

ok

pulsar patrol
#

That’s not a thing

#

Believe me

last gorge
#

lol

pulsar patrol
#

If u want it cheap, all of them are sketchy

last gorge
#

aliexpress KermitVader

cobalt pulsar
#

well idk its my first pc build and windows installation aha

#

ooo

#

ok

#

well we learn with failure haha

last gorge
#

well by sketchy we mean it worked for most people we know, but we cannot guarantee it will work for you

cobalt pulsar
#

ok perfect thx i will try it and keep you updated gaga

#

aha *

last gorge
#

kk 👍

pulsar patrol
#

Gl @cobalt pulsar

cobalt pulsar
#

thx

wary furnace
#

Opinions on best RGB software?

#

Anyone?

last gorge
#

they all are bad

wary furnace
#

Best one lol

last gorge
#

iCUE has pretty good integration tho

wary furnace
#

I kinda figured out that they're all bad lol

last gorge
#

lol

wary furnace
#

Is there a list of supported parts/brands?

dense mirage
#

Corsair

tepid silo
#

Icue is a great way to keep your pc from running too fast

#

Or being too secure from security vulnerabilities

dense mirage
#

To be fair, so is windows

last gorge
#

lol

tepid silo
tall lichen
#

my pc keeps preiodically freezing with this error in event viewer:

svchost (15616,R,98) TILEREPOSITORYS-1-5-18: Error -1023 (0xfffffc01) occurred while opening logfile C:\WINDOWS\system32\config\systemprofile\AppData\Local\TileDataLayer\Database\EDB.log

#

anyone know whats going on?

tall lichen
#

i noticed the file doesn't exist so i created one i'll see if that fixes it

tall lichen
#

well now it crashes instead of freezing...

tall lichen
#

apparently i was supposed to only make the folders and not the file

gritty summit
#

Hey guys just got a new laptop nothing serious just a basic laptop to watch YouTube and stuff but it does have Radeon Vega 3 but when I downloaded the drivers for it it’s not picking up Minecraft. I’ve played a little but it’s not picking up game. Anyone know what’s up ?

dense mirage
#

What do you mean it's not picking it up?

gritty summit
#

@dense mirage when I open up Radeon Software and search for games nothing comes up. I was able to manually add the launcher but that’s about it. On my regular PC with the Nivida driver the actual game get detected not just the launcher

dense mirage
#

Not sure. What do you need it detected in the radeon software for?

gritty summit
#

Not much just for recommended setting. Vega 3 I know it like the bare minimal graphic but I would like to see if it could play at any higher than all low settings without me spending time playing with the settings

dense mirage
#

Ah

wary cedar
dense mirage
#

Yes

vast summit
#

Yes

dense mirage
#

What are you doing with the cube?

vast summit
#

Admiring it probably

wary cedar
#

yes

#

my computer is too weak for the mighty cube

wary cedar
#

ive tried optix and cuda neither works

#

im just trying to do that bmw render

near furnace
#

guys could you please confirm that these are experts preferred/standard tools for:
monitoring: HWInfo64

**benchmarking: **
CPU: CineBenchR20
GPU: 3DMark (synthetic), LuxMark (Compute)
Storage: CrystalDiskMark

Stress testing:
CPU: Prime95 (small FFT)
GPU: Furmark
RAM: MemTest86

Anything you'd like to change ?

peak notch
#

i guess, slap OCCT on there for CPU/GPU

tepid silo
#

Pretty good ya, furmark is just to max out the gpu heat/power , for thermal testing

#

For ram testing, memtest HCI is popular, memtest86 is still solid though

#
near furnace
#

oouu thanks guys for that

tepid silo
#

For overall stability testing for a gaming system, I like running timespy

near furnace
#

oh right I forgot to add, Time Spy and Fire Strike right ?

tepid silo
#

Time spy is dx12 and utilizes AVX2 cpu instructions. It's the most modern test. Firestrike is older.

near furnace
#

ah great okay thanks

tepid silo
near furnace
#

oof the exciting world of benchmarking xD
don't think I'm ready but I'll keep in mind hah

#

I just needed to make sure the new components are performing as expected

tepid silo
#

TBH, I like userbenchmark for that as a quick, preliminary test

near furnace
#

ooo right, I heard bad things about it but they're still good just to have a rough idea right ?

tepid silo
#

People take the generalized ratings too seriously and ignore the data itself (which is pretty useful imo)

#

This part is stupid - , I don't pay attention to these ratings

near furnace
#

gotcha hah

tepid silo
fallen jewel
#

Hey guys

#

I just got my new pc

#

And i have a problem installing windows

#

I downloaded the windows media tool to my usb stick and i have a windows key, I entered the key and then choose the nvme to install windows on, it starts installing and then it restarts to the start. What should i do

wary furnace
#

On startup of the Fortnite, I get the error 30005 (CreateFile failed with 32). I have re-installed the anti-cheat, EasyAnti-cheat and verifying the install did nothing. Does anyone know what I can do to fix this?

#

IK this isn't the Fortnite Discord server but everyone there is dead or something

#

@fallen jewel I'm no expert, but could your SSD not have enough storage or be corrupt?

fallen jewel
#

can u help me with this problem

dense mirage
#

Time to install a OS. Do you have any other computers available?

junior cliff
#

hey! can I get some help on some overclocking settings. If someone can call while I screenshare or give me some advice, I have an RTX 2080Ti with 11Gb Vram and an i7-9700k. I want to Overclock my GPU so I get better framerate, and know what I cacn keep my CPU at so it doesnt break my PC. I have an NZXT Liquid Cooler on my CPU at 75% (Pump) and my GPU Fans are at 40% speed.

wary cedar
#

All gpus and CPUs are different your just gonna have to mess around

rocky cedar
wary cedar
#

Pins?

#

What ones

last gorge
wary cedar
#

Lol yeah ik

#

But I don't see anything about that

last gorge
#

in the overclocking channel

#

some guides with general info

wary cedar
#

Oh I thought he was talking about the pins in this channel

wary furnace
#

Does anyone know why my head sets mic doesn't work?